URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [iq2000/] [predicates.md] - Rev 709
Compare with Previous | Blame | View Log
;; Predicate definitions for Vitesse IQ2000.
;; Copyright (C) 2005, 2007 Free Software Foundation, Inc.
;;
;; This file is part of GCC.
;;
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;;
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; <http://www.gnu.org/licenses/>.
;; Return 1 if OP can be used as an operand where a register or 16-bit
;; unsigned integer is needed.
(define_predicate "uns_arith_operand"
(match_code "reg,const_int,subreg")
{
if (GET_CODE (op) == CONST_INT && SMALL_INT_UNSIGNED (op))
return 1;
return register_operand (op, mode);
})
;; Return 1 if OP can be used as an operand where a 16-bit integer is
;; needed.
(define_predicate "arith_operand"
(match_code "reg,const_int,subreg")
{
if (GET_CODE (op) == CONST_INT && SMALL_INT (op))
return 1;
return register_operand (op, mode);
})
;; Return 1 if OP is a register or a constant. gen_int_relational
;; takes care of forcing out-of-range constants into a register.
(define_predicate "reg_or_const_operand"
(ior (match_code "const_int")
(and (match_code "reg,subreg")
(match_operand 0 "register_operand"))))
;; Return 1 if OP is a integer which fits in 16 bits.
(define_predicate "small_int"
(match_code "const_int")
{
return (GET_CODE (op) == CONST_INT && SMALL_INT (op));
})
;; Return 1 if OP is a 32-bit integer which is too big to be loaded
;; with one instruction.
(define_predicate "large_int"
(match_code "const_int")
{
HOST_WIDE_INT value;
if (GET_CODE (op) != CONST_INT)
return 0;
value = INTVAL (op);
/* IOR reg,$r0,value. */
if ((value & ~ ((HOST_WIDE_INT) 0x0000ffff)) == 0)
return 0;
/* SUBU reg,$r0,value. */
if (((unsigned HOST_WIDE_INT) (value + 32768)) <= 32767)
return 0;
/* LUI reg,value >> 16. */
if ((value & 0x0000ffff) == 0)
return 0;
return 1;
})
;; Return 1 if OP is a register or the constant 0.
(define_predicate "reg_or_0_operand"
(match_code "reg,const_int,const_double,subreg")
{
switch (GET_CODE (op))
{
case CONST_INT:
return INTVAL (op) == 0;
case CONST_DOUBLE:
return op == CONST0_RTX (mode);
case REG:
case SUBREG:
return register_operand (op, mode);
default:
break;
}
return 0;
})
;; Return 1 if OP is a memory operand that fits in a single
;; instruction (i.e., register + small offset).
(define_predicate "simple_memory_operand"
(match_code "mem,subreg")
{
rtx addr, plus0, plus1;
/* Eliminate non-memory operations. */
if (GET_CODE (op) != MEM)
return 0;
/* Dword operations really put out 2 instructions, so eliminate them. */
if (GET_MODE_SIZE (GET_MODE (op)) > (unsigned) UNITS_PER_WORD)
return 0;
/* Decode the address now. */
addr = XEXP (op, 0);
switch (GET_CODE (addr))
{
case REG:
case LO_SUM:
return 1;
case CONST_INT:
return SMALL_INT (addr);
case PLUS:
plus0 = XEXP (addr, 0);
plus1 = XEXP (addr, 1);
if (GET_CODE (plus0) == REG
&& GET_CODE (plus1) == CONST_INT && SMALL_INT (plus1)
&& SMALL_INT_UNSIGNED (plus1) /* No negative offsets. */)
return 1;
else if (GET_CODE (plus1) == REG
&& GET_CODE (plus0) == CONST_INT && SMALL_INT (plus0)
&& SMALL_INT_UNSIGNED (plus1) /* No negative offsets. */)
return 1;
else
return 0;
case SYMBOL_REF:
return 0;
default:
break;
}
return 0;
})
;; Return nonzero if the code of this rtx pattern is EQ or NE.
(define_predicate "equality_op"
(match_code "eq,ne")
{
if (mode != GET_MODE (op))
return 0;
return GET_CODE (op) == EQ || GET_CODE (op) == NE;
})
;; Return nonzero if the code is a relational operations (EQ, LE,
;; etc).
(define_predicate "cmp_op"
(match_code "eq,ne,gt,ge,gtu,geu,lt,le,ltu,leu")
{
if (mode != GET_MODE (op))
return 0;
return COMPARISON_P (op);
})
;; Return nonzero if the operand is either the PC or a label_ref.
(define_special_predicate "pc_or_label_operand"
(match_code "pc,label_ref")
{
if (op == pc_rtx)
return 1;
if (GET_CODE (op) == LABEL_REF)
return 1;
return 0;
})
;; Return nonzero if OP is a valid operand for a call instruction.
(define_predicate "call_insn_operand"
(match_code "const_int,const,symbol_ref,reg")
{
return (CONSTANT_ADDRESS_P (op)
|| (GET_CODE (op) == REG && op != arg_pointer_rtx
&& ! (REGNO (op) >= FIRST_PSEUDO_REGISTER
&& REGNO (op) <= LAST_VIRTUAL_REGISTER)));
})
;; Return nonzero if OP is valid as a source operand for a move
;; instruction.
(define_predicate "move_operand"
(match_code "const_int,const_double,const,symbol_ref,label_ref,subreg,reg,mem")
{
/* Accept any general operand after reload has started; doing so
avoids losing if reload does an in-place replacement of a register
with a SYMBOL_REF or CONST. */
return (general_operand (op, mode)
&& (! (iq2000_check_split (op, mode))
|| reload_in_progress || reload_completed));
})
;; Return nonzero if OP is a constant power of 2.
(define_predicate "power_of_2_operand"
(match_code "const_int")
{
int intval;
if (GET_CODE (op) != CONST_INT)
return 0;
else
intval = INTVAL (op);
return ((intval & ((unsigned)(intval) - 1)) == 0);
})