URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [mcore/] [mcore.md] - Rev 716
Go to most recent revision | Compare with Previous | Blame | View Log
;; Machine description the Motorola MCore;; Copyright (C) 1993, 1999, 2000, 2004, 2005, 2007, 2009, 2010;; Free Software Foundation, Inc.;; Contributed by Motorola.;; This file is part of GCC.;; GCC is free software; you can redistribute it and/or modify;; it under the terms of the GNU General Public License as published by;; the Free Software Foundation; either version 3, or (at your option);; any later version.;; GCC is distributed in the hope that it will be useful,;; but WITHOUT ANY WARRANTY; without even the implied warranty of;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the;; GNU General Public License for more details.;; You should have received a copy of the GNU General Public License;; along with GCC; see the file COPYING3. If not see;; <http://www.gnu.org/licenses/>.;;- See file "rtl.def" for documentation on define_insn, match_*, et. al.;; -------------------------------------------------------------------------;; Attributes;; -------------------------------------------------------------------------; Target CPU.(define_attr "type" "brcond,branch,jmp,load,store,move,alu,shift"(const_string "alu"));; If a branch destination is within -2048..2047 bytes away from the;; instruction it can be 2 bytes long. All other conditional branches;; are 10 bytes long, and all other unconditional branches are 8 bytes.;;;; the assembler handles the long-branch span case for us if we use;; the "jb*" mnemonics for jumps/branches. This pushes the span;; calculations and the literal table placement into the assembler,;; where their interactions can be managed in a single place.;; All MCORE instructions are two bytes long.(define_attr "length" "" (const_int 2));; Scheduling. We only model a simple load latency.(define_insn_reservation "any_insn" 1(eq_attr "type" "!load")"nothing")(define_insn_reservation "memory" 2(eq_attr "type" "load")"nothing")(include "predicates.md")(include "constraints.md");; -------------------------------------------------------------------------;; Test and bit test;; -------------------------------------------------------------------------(define_insn ""[(set (reg:SI 17)(sign_extract:SI (match_operand:SI 0 "mcore_arith_reg_operand" "r")(const_int 1)(match_operand:SI 1 "mcore_literal_K_operand" "K")))]"""btsti %0,%1"[(set_attr "type" "shift")])(define_insn ""[(set (reg:SI 17)(zero_extract:SI (match_operand:SI 0 "mcore_arith_reg_operand" "r")(const_int 1)(match_operand:SI 1 "mcore_literal_K_operand" "K")))]"""btsti %0,%1"[(set_attr "type" "shift")]);;; This is created by combine.(define_insn ""[(set (reg:CC 17)(ne:CC (zero_extract:SI (match_operand:SI 0 "mcore_arith_reg_operand" "r")(const_int 1)(match_operand:SI 1 "mcore_literal_K_operand" "K"))(const_int 0)))]"""btsti %0,%1"[(set_attr "type" "shift")]);; Created by combine from conditional patterns below (see sextb/btsti rx,31)(define_insn ""[(set (reg:CC 17)(ne:CC (lshiftrt:SI (match_operand:SI 0 "mcore_arith_reg_operand" "r")(const_int 7))(const_int 0)))]"GET_CODE(operands[0]) == SUBREG &&GET_MODE(SUBREG_REG(operands[0])) == QImode""btsti %0,7"[(set_attr "type" "shift")])(define_insn ""[(set (reg:CC 17)(ne:CC (lshiftrt:SI (match_operand:SI 0 "mcore_arith_reg_operand" "r")(const_int 15))(const_int 0)))]"GET_CODE(operands[0]) == SUBREG &&GET_MODE(SUBREG_REG(operands[0])) == HImode""btsti %0,15"[(set_attr "type" "shift")])(define_split[(set (pc)(if_then_else (ne (eq:CC (zero_extract:SI(match_operand:SI 0 "mcore_arith_reg_operand" "")(const_int 1)(match_operand:SI 1 "mcore_literal_K_operand" ""))(const_int 0))(const_int 0))(label_ref (match_operand 2 "" ""))(pc)))]""[(set (reg:CC 17)(zero_extract:SI (match_dup 0) (const_int 1) (match_dup 1)))(set (pc) (if_then_else (eq (reg:CC 17) (const_int 0))(label_ref (match_dup 2))(pc)))]"")(define_split[(set (pc)(if_then_else (eq (ne:CC (zero_extract:SI(match_operand:SI 0 "mcore_arith_reg_operand" "")(const_int 1)(match_operand:SI 1 "mcore_literal_K_operand" ""))(const_int 0))(const_int 0))(label_ref (match_operand 2 "" ""))(pc)))]""[(set (reg:CC 17)(zero_extract:SI (match_dup 0) (const_int 1) (match_dup 1)))(set (pc) (if_then_else (eq (reg:CC 17) (const_int 0))(label_ref (match_dup 2))(pc)))]"");; XXX - disabled by nickc because it fails on libiberty/fnmatch.c;;;; ; Experimental - relax immediates for and, andn, or, and tst to allow;; ; any immediate value (or an immediate at all -- or, andn, & tst).;; ; This is done to allow bit field masks to fold together in combine.;; ; The reload phase will force the immediate into a register at the;; ; very end. This helps in some cases, but hurts in others: we'd;; ; really like to cse these immediates. However, there is a phase;; ; ordering problem here. cse picks up individual masks and cse's;; ; those, but not folded masks (cse happens before combine). It's;; ; not clear what the best solution is because we really want cse;; ; before combine (leaving the bit field masks alone). To pick up;; ; relaxed immediates use -mrelax-immediates. It might take some;; ; experimenting to see which does better (i.e. regular imms vs.;; ; arbitrary imms) for a particular code. BRC;;;; (define_insn "";; [(set (reg:CC 17);; (ne:CC (and:SI (match_operand:SI 0 "mcore_arith_reg_operand" "r");; (match_operand:SI 1 "mcore_arith_any_imm_operand" "rI"));; (const_int 0)))];; "TARGET_RELAX_IMM";; "tst %0,%1");;;; (define_insn "";; [(set (reg:CC 17);; (ne:CC (and:SI (match_operand:SI 0 "mcore_arith_reg_operand" "r");; (match_operand:SI 1 "mcore_arith_M_operand" "r"));; (const_int 0)))];; "!TARGET_RELAX_IMM";; "tst %0,%1")(define_insn ""[(set (reg:CC 17)(ne:CC (and:SI (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "mcore_arith_M_operand" "r"))(const_int 0)))]"""tst %0,%1")(define_split[(parallel[(set (reg:CC 17)(ne:CC (ne:SI (leu:CC (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operand:SI 1 "mcore_arith_reg_operand" ""))(const_int 0))(const_int 0)))(clobber (match_operand:CC 2 "mcore_arith_reg_operand" ""))])]""[(set (reg:CC 17) (ne:SI (match_dup 0) (const_int 0)))(set (reg:CC 17) (leu:CC (match_dup 0) (match_dup 1)))]);; -------------------------------------------------------------------------;; SImode signed integer comparisons;; -------------------------------------------------------------------------(define_insn "decne_t"[(set (reg:CC 17) (ne:CC (plus:SI (match_operand:SI 0 "mcore_arith_reg_operand" "+r")(const_int -1))(const_int 0)))(set (match_dup 0)(plus:SI (match_dup 0)(const_int -1)))]"""decne %0");; The combiner seems to prefer the following to the former.;;(define_insn ""[(set (reg:CC 17) (ne:CC (match_operand:SI 0 "mcore_arith_reg_operand" "+r")(const_int 1)))(set (match_dup 0)(plus:SI (match_dup 0)(const_int -1)))]"""decne %0")(define_insn "cmpnesi_t"[(set (reg:CC 17) (ne:CC (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "mcore_arith_reg_operand" "r")))]"""cmpne %0,%1")(define_insn "cmpneisi_t"[(set (reg:CC 17) (ne:CC (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "mcore_arith_K_operand" "K")))]"""cmpnei %0,%1")(define_insn "cmpgtsi_t"[(set (reg:CC 17) (gt:CC (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "mcore_arith_reg_operand" "r")))]"""cmplt %1,%0")(define_insn ""[(set (reg:CC 17) (gt:CC (plus:SI(match_operand:SI 0 "mcore_arith_reg_operand" "+r")(const_int -1))(const_int 0)))(set (match_dup 0) (plus:SI (match_dup 0) (const_int -1)))]"""decgt %0")(define_insn "cmpltsi_t"[(set (reg:CC 17) (lt:CC (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "mcore_arith_reg_operand" "r")))]"""cmplt %0,%1"); cmplti is 1-32(define_insn "cmpltisi_t"[(set (reg:CC 17) (lt:CC (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "mcore_arith_J_operand" "J")))]"""cmplti %0,%1"); covers cmplti x,0(define_insn ""[(set (reg:CC 17) (lt:CC (match_operand:SI 0 "mcore_arith_reg_operand" "r")(const_int 0)))]"""btsti %0,31")(define_insn ""[(set (reg:CC 17) (lt:CC (plus:SI(match_operand:SI 0 "mcore_arith_reg_operand" "+r")(const_int -1))(const_int 0)))(set (match_dup 0) (plus:SI (match_dup 0) (const_int -1)))]"""declt %0");; -------------------------------------------------------------------------;; SImode unsigned integer comparisons;; -------------------------------------------------------------------------(define_insn "cmpgeusi_t"[(set (reg:CC 17) (geu:CC (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "mcore_arith_reg_operand" "r")))]"""cmphs %0,%1")(define_insn "cmpgeusi_0"[(set (reg:CC 17) (geu:CC (match_operand:SI 0 "mcore_arith_reg_operand" "r")(const_int 0)))]"""cmpnei %0, 0")(define_insn "cmpleusi_t"[(set (reg:CC 17) (leu:CC (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "mcore_arith_reg_operand" "r")))]"""cmphs %1,%0");; -------------------------------------------------------------------------;; Logical operations;; -------------------------------------------------------------------------;; Logical AND clearing a single bit. andsi3 knows that we have this;; pattern and allows the constant literal pass through.;;;; RBE 2/97: don't need this pattern any longer...;; RBE: I don't think we need both "S" and exact_log2() clauses.;;(define_insn "";; [(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r");; (and:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0");; (match_operand:SI 2 "const_int_operand" "S")))];; "mcore_arith_S_operand (operands[2])";; "bclri %0,%Q2");;(define_insn "andnsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(and:SI (not:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r"))(match_operand:SI 2 "mcore_arith_reg_operand" "0")))]"""andn %0,%1")(define_expand "andsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(and:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "nonmemory_operand" "")))]"""{if (GET_CODE (operands[2]) == CONST_INT && INTVAL (operands[2]) < 0&& ! mcore_arith_S_operand (operands[2])){HOST_WIDE_INT not_value = ~ INTVAL (operands[2]);if ( CONST_OK_FOR_I (not_value)|| CONST_OK_FOR_M (not_value)|| CONST_OK_FOR_N (not_value)){operands[2] = copy_to_mode_reg (SImode, GEN_INT (not_value));emit_insn (gen_andnsi3 (operands[0], operands[2], operands[1]));DONE;}}if (! mcore_arith_K_S_operand (operands[2], SImode))operands[2] = copy_to_mode_reg (SImode, operands[2]);}")(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(and:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0,0,r,0")(match_operand:SI 2 "mcore_arith_any_imm_operand" "r,K,0,S")))]"TARGET_RELAX_IMM""*{switch (which_alternative){case 0: return \"and %0,%2\";case 1: return \"andi %0,%2\";case 2: return \"and %0,%1\";/* case -1: return \"bclri %0,%Q2\"; will not happen */case 3: return mcore_output_bclri (operands[0], INTVAL (operands[2]));default: gcc_unreachable ();}}");; This was the old "S" which was "!(2^n)" */;; case -1: return \"bclri %0,%Q2\"; will not happen */(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(and:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0,0,r,0")(match_operand:SI 2 "mcore_arith_K_S_operand" "r,K,0,S")))]"!TARGET_RELAX_IMM""*{switch (which_alternative){case 0: return \"and %0,%2\";case 1: return \"andi %0,%2\";case 2: return \"and %0,%1\";case 3: return mcore_output_bclri (operands[0], INTVAL (operands[2]));default: gcc_unreachable ();}}");(define_insn "iorsi3"; [(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r"); (ior:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0"); (match_operand:SI 2 "mcore_arith_reg_operand" "r")))]; ""; "or %0,%2"); need an expand to resolve ambiguity betw. the two iors below.(define_expand "iorsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(ior:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "nonmemory_operand" "")))]"""{if (! mcore_arith_M_operand (operands[2], SImode))operands[2] = copy_to_mode_reg (SImode, operands[2]);}")(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r")(ior:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0,0,0")(match_operand:SI 2 "mcore_arith_any_imm_operand" "r,M,T")))]"TARGET_RELAX_IMM""*{switch (which_alternative){case 0: return \"or %0,%2\";case 1: return \"bseti %0,%P2\";case 2: return mcore_output_bseti (operands[0], INTVAL (operands[2]));default: gcc_unreachable ();}}")(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r")(ior:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0,0,0")(match_operand:SI 2 "mcore_arith_M_operand" "r,M,T")))]"!TARGET_RELAX_IMM""*{switch (which_alternative){case 0: return \"or %0,%2\";case 1: return \"bseti %0,%P2\";case 2: return mcore_output_bseti (operands[0], INTVAL (operands[2]));default: gcc_unreachable ();}}");(define_insn ""; [(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r"); (ior:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0"); (match_operand:SI 2 "const_int_operand" "M")))]; "exact_log2 (INTVAL (operands[2])) >= 0"; "bseti %0,%P2");(define_insn ""; [(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r"); (ior:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0"); (match_operand:SI 2 "const_int_operand" "i")))]; "mcore_num_ones (INTVAL (operands[2])) < 3"; "* return mcore_output_bseti (operands[0], INTVAL (operands[2]));")(define_insn "xorsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(xor:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0")(match_operand:SI 2 "mcore_arith_reg_operand" "r")))]"""xor %0,%2"); these patterns give better code then gcc invents if; left to its own devices(define_insn "anddi3"[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=r")(and:DI (match_operand:DI 1 "mcore_arith_reg_operand" "%0")(match_operand:DI 2 "mcore_arith_reg_operand" "r")))]"""and %0,%2\;and %R0,%R2"[(set_attr "length" "4")])(define_insn "iordi3"[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=r")(ior:DI (match_operand:DI 1 "mcore_arith_reg_operand" "%0")(match_operand:DI 2 "mcore_arith_reg_operand" "r")))]"""or %0,%2\;or %R0,%R2"[(set_attr "length" "4")])(define_insn "xordi3"[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=r")(xor:DI (match_operand:DI 1 "mcore_arith_reg_operand" "%0")(match_operand:DI 2 "mcore_arith_reg_operand" "r")))]"""xor %0,%2\;xor %R0,%R2"[(set_attr "length" "4")]);; -------------------------------------------------------------------------;; Shifts and rotates;; -------------------------------------------------------------------------;; Only allow these if the shift count is a convenient constant.(define_expand "rotlsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(rotate:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "nonmemory_operand" "")))]"""if (! mcore_literal_K_operand (operands[2], SImode))FAIL;");; We can only do constant rotates, which is what this pattern provides.;; The combiner will put it together for us when we do:;; (x << N) | (x >> (32 - N))(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(rotate:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0")(match_operand:SI 2 "mcore_literal_K_operand" "K")))]"""rotli %0,%2"[(set_attr "type" "shift")])(define_insn "ashlsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r")(ashift:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0,0")(match_operand:SI 2 "mcore_arith_K_operand_not_0" "r,K")))]"""@lsl %0,%2lsli %0,%2"[(set_attr "type" "shift")])(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(ashift:SI (const_int 1)(match_operand:SI 1 "mcore_arith_reg_operand" "r")))]"""bgenr %0,%1"[(set_attr "type" "shift")])(define_insn "ashrsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r")(ashiftrt:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0,0")(match_operand:SI 2 "mcore_arith_K_operand_not_0" "r,K")))]"""@asr %0,%2asri %0,%2"[(set_attr "type" "shift")])(define_insn "lshrsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r")(lshiftrt:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0,0")(match_operand:SI 2 "mcore_arith_K_operand_not_0" "r,K")))]"""@lsr %0,%2lsri %0,%2"[(set_attr "type" "shift")]);(define_expand "ashldi3"; [(parallel[(set (match_operand:DI 0 "mcore_arith_reg_operand" ""); (ashift:DI (match_operand:DI 1 "mcore_arith_reg_operand" ""); (match_operand:DI 2 "immediate_operand" "")));; (clobber (reg:CC 17))])];; ""; ";{; if (GET_CODE (operands[2]) != CONST_INT; || INTVAL (operands[2]) != 1); FAIL;;}");;(define_insn ""; [(set (match_operand:DI 0 "mcore_arith_reg_operand" "=r"); (ashift:DI (match_operand:DI 1 "mcore_arith_reg_operand" "0"); (const_int 1))); (clobber (reg:CC 17))]; ""; "lsli %R0,0\;rotli %0,0"; [(set_attr "length" "4") (set_attr "type" "shift")]);; -------------------------------------------------------------------------;; Index instructions;; -------------------------------------------------------------------------;; The second of each set of patterns is borrowed from the alpha.md file.;; These variants of the above insns can occur if the second operand;; is the frame pointer. This is a kludge, but there doesn't;; seem to be a way around it. Only recognize them while reloading.;; We must use reload_operand for some operands in case frame pointer;; elimination put a MEM with invalid address there. Otherwise,;; the result of the substitution will not match this pattern, and reload;; will not be able to correctly fix the result.;; indexing longlongs or doubles (8 bytes)(define_insn "indexdi_t"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(plus:SI (mult:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r")(const_int 8))(match_operand:SI 2 "mcore_arith_reg_operand" "0")))]"""*if (! mcore_is_same_reg (operands[1], operands[2])){output_asm_insn (\"ixw\\t%0,%1\", operands);output_asm_insn (\"ixw\\t%0,%1\", operands);}else{output_asm_insn (\"ixh\\t%0,%1\", operands);output_asm_insn (\"ixh\\t%0,%1\", operands);}return \"\";";; if operands[1] == operands[2], the first option above is wrong! -- dac;; was this... -- dac;; ixw %0,%1\;ixw %0,%1"[(set_attr "length" "4")])(define_insn ""[(set (match_operand:SI 0 "mcore_reload_operand" "=r,r,r")(plus:SI (plus:SI (mult:SI (match_operand:SI 1 "mcore_reload_operand" "r,r,r")(const_int 8))(match_operand:SI 2 "mcore_arith_reg_operand" "0,0,0"))(match_operand:SI 3 "mcore_addsub_operand" "r,J,L")))]"reload_in_progress""@ixw %0,%1\;ixw %0,%1\;addu %0,%3ixw %0,%1\;ixw %0,%1\;addi %0,%3ixw %0,%1\;ixw %0,%1\;subi %0,%M3"[(set_attr "length" "6")]);; indexing longs (4 bytes)(define_insn "indexsi_t"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(plus:SI (mult:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r")(const_int 4))(match_operand:SI 2 "mcore_arith_reg_operand" "0")))]"""ixw %0,%1")(define_insn ""[(set (match_operand:SI 0 "mcore_reload_operand" "=r,r,r")(plus:SI (plus:SI (mult:SI (match_operand:SI 1 "mcore_reload_operand" "r,r,r")(const_int 4))(match_operand:SI 2 "mcore_arith_reg_operand" "0,0,0"))(match_operand:SI 3 "mcore_addsub_operand" "r,J,L")))]"reload_in_progress""@ixw %0,%1\;addu %0,%3ixw %0,%1\;addi %0,%3ixw %0,%1\;subi %0,%M3"[(set_attr "length" "4")]);; indexing shorts (2 bytes)(define_insn "indexhi_t"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(plus:SI (mult:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r")(const_int 2))(match_operand:SI 2 "mcore_arith_reg_operand" "0")))]"""ixh %0,%1")(define_insn ""[(set (match_operand:SI 0 "mcore_reload_operand" "=r,r,r")(plus:SI (plus:SI (mult:SI (match_operand:SI 1 "mcore_reload_operand" "r,r,r")(const_int 2))(match_operand:SI 2 "mcore_arith_reg_operand" "0,0,0"))(match_operand:SI 3 "mcore_addsub_operand" "r,J,L")))]"reload_in_progress""@ixh %0,%1\;addu %0,%3ixh %0,%1\;addi %0,%3ixh %0,%1\;subi %0,%M3"[(set_attr "length" "4")]);;;; Other sizes may be handy for indexing.;; the tradeoffs to consider when adding these are;; code size, execution time [vs. mul it is easy to win],;; and register pressure -- these patterns don't use an extra;; register to build the offset from the base;; and whether the compiler will not come up with some other idiom.;;;; -------------------------------------------------------------------------;; Addition, Subtraction instructions;; -------------------------------------------------------------------------(define_expand "addsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(plus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "nonmemory_operand" "")))]"""{/* If this is an add to the frame pointer, then accept it as is sothat we can later fold in the fp/sp offset from frame pointerelimination. */if (flag_omit_frame_pointer&& GET_CODE (operands[1]) == REG&& (REGNO (operands[1]) == VIRTUAL_STACK_VARS_REGNUM|| REGNO (operands[1]) == FRAME_POINTER_REGNUM)){emit_insn (gen_addsi3_fp (operands[0], operands[1], operands[2]));DONE;}/* Convert adds to subtracts if this makes loading the constant cheaper.But only if we are allowed to generate new pseudos. */if (! (reload_in_progress || reload_completed)&& GET_CODE (operands[2]) == CONST_INT&& INTVAL (operands[2]) < -32){HOST_WIDE_INT neg_value = - INTVAL (operands[2]);if ( CONST_OK_FOR_I (neg_value)|| CONST_OK_FOR_M (neg_value)|| CONST_OK_FOR_N (neg_value)){operands[2] = copy_to_mode_reg (SImode, GEN_INT (neg_value));emit_insn (gen_subsi3 (operands[0], operands[1], operands[2]));DONE;}}if (! mcore_addsub_operand (operands[2], SImode))operands[2] = copy_to_mode_reg (SImode, operands[2]);}");; RBE: for some constants which are not in the range which allows;; us to do a single operation, we will try a paired addi/addi instead;; of a movi/addi. This relieves some register pressure at the expense;; of giving away some potential constant reuse.;;;; RBE 6/17/97: this didn't buy us anything, but I keep the pattern;; for later reference;;;; (define_insn "addsi3_i2";; [(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r");; (plus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0");; (match_operand:SI 2 "const_int_operand" "g")))];; "GET_CODE(operands[2]) == CONST_INT;; && ((INTVAL (operands[2]) > 32 && INTVAL(operands[2]) <= 64);; || (INTVAL (operands[2]) < -32 && INTVAL(operands[2]) >= -64))";; "*;; {;; HOST_WIDE_INT n = INTVAL(operands[2]);;; if (n > 0);; {;; operands[2] = GEN_INT(n - 32);;; return \"addi\\t%0,32\;addi\\t%0,%2\";;; };; else;; {;; n = (-n);;; operands[2] = GEN_INT(n - 32);;; return \"subi\\t%0,32\;subi\\t%0,%2\";;; };; }";; [(set_attr "length" "4")])(define_insn "addsi3_i"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r")(plus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0,0,0")(match_operand:SI 2 "mcore_addsub_operand" "r,J,L")))]"""@addu %0,%2addi %0,%2subi %0,%M2");; This exists so that address computations based on the frame pointer;; can be folded in when frame pointer elimination occurs. Ordinarily;; this would be bad because it allows insns which would require reloading,;; but without it, we get multiple adds where one would do.(define_insn "addsi3_fp"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r")(plus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0,0,0")(match_operand:SI 2 "immediate_operand" "r,J,L")))]"flag_omit_frame_pointer&& (reload_in_progress || reload_completed || REGNO (operands[1]) == FRAME_POINTER_REGNUM)""@addu %0,%2addi %0,%2subi %0,%M2");; RBE: for some constants which are not in the range which allows;; us to do a single operation, we will try a paired addi/addi instead;; of a movi/addi. This relieves some register pressure at the expense;; of giving away some potential constant reuse.;;;; RBE 6/17/97: this didn't buy us anything, but I keep the pattern;; for later reference;;;; (define_insn "subsi3_i2";; [(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r");; (plus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0");; (match_operand:SI 2 "const_int_operand" "g")))];; "TARGET_RBETEST && GET_CODE(operands[2]) == CONST_INT;; && ((INTVAL (operands[2]) > 32 && INTVAL(operands[2]) <= 64);; || (INTVAL (operands[2]) < -32 && INTVAL(operands[2]) >= -64))";; "*;; {;; HOST_WIDE_INT n = INTVAL(operands[2]);;; if ( n > 0);; {;; operands[2] = GEN_INT( n - 32);;; return \"subi\\t%0,32\;subi\\t%0,%2\";;; };; else;; {;; n = (-n);;; operands[2] = GEN_INT(n - 32);;; return \"addi\\t%0,32\;addi\\t%0,%2\";;; };; }";; [(set_attr "length" "4")]);(define_insn "subsi3"; [(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r"); (minus:SI (match_operand:SI 1 "mcore_arith_K_operand" "0,0,r,K"); (match_operand:SI 2 "mcore_arith_J_operand" "r,J,0,0")))]; ""; "@; sub %0,%2; subi %0,%2; rsub %0,%1; rsubi %0,%1")(define_insn "subsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r")(minus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0,0,r")(match_operand:SI 2 "mcore_arith_J_operand" "r,J,0")))]"""@subu %0,%2subi %0,%2rsub %0,%1")(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(minus:SI (match_operand:SI 1 "mcore_literal_K_operand" "K")(match_operand:SI 2 "mcore_arith_reg_operand" "0")))]"""rsubi %0,%1")(define_insn "adddi3"[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=&r")(plus:DI (match_operand:DI 1 "mcore_arith_reg_operand" "%0")(match_operand:DI 2 "mcore_arith_reg_operand" "r")))(clobber (reg:CC 17))]"""*{if (TARGET_LITTLE_END)return \"cmplt %0,%0\;addc %0,%2\;addc %R0,%R2\";return \"cmplt %R0,%R0\;addc %R0,%R2\;addc %0,%2\";}"[(set_attr "length" "6")]);; special case for "longlong += 1"(define_insn ""[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=&r")(plus:DI (match_operand:DI 1 "mcore_arith_reg_operand" "0")(const_int 1)))(clobber (reg:CC 17))]"""*{if (TARGET_LITTLE_END)return \"addi %0,1\;cmpnei %0,0\;incf %R0\";return \"addi %R0,1\;cmpnei %R0,0\;incf %0\";}"[(set_attr "length" "6")]);; special case for "longlong -= 1"(define_insn ""[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=&r")(plus:DI (match_operand:DI 1 "mcore_arith_reg_operand" "0")(const_int -1)))(clobber (reg:CC 17))]"""*{if (TARGET_LITTLE_END)return \"cmpnei %0,0\;decf %R0\;subi %0,1\";return \"cmpnei %R0,0\;decf %0\;subi %R0,1\";}"[(set_attr "length" "6")]);; special case for "longlong += const_int";; we have to use a register for the const_int because we don't;; have an unsigned compare immediate... only +/- 1 get to;; play the no-extra register game because they compare with 0.;; This winds up working out for any literal that is synthesized;; with a single instruction. The more complicated ones look;; like the get broken into subreg's to get initialized too soon;; for us to catch here. -- RBE 4/25/96;; only allow for-sure positive values.(define_insn ""[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=&r")(plus:DI (match_operand:DI 1 "mcore_arith_reg_operand" "0")(match_operand:SI 2 "const_int_operand" "r")))(clobber (reg:CC 17))]"GET_CODE (operands[2]) == CONST_INT&& INTVAL (operands[2]) > 0 && ! (INTVAL (operands[2]) & 0x80000000)""*{gcc_assert (GET_MODE (operands[2]) == SImode);if (TARGET_LITTLE_END)return \"addu %0,%2\;cmphs %0,%2\;incf %R0\";return \"addu %R0,%2\;cmphs %R0,%2\;incf %0\";}"[(set_attr "length" "6")]);; optimize "long long" + "unsigned long";; won't trigger because of how the extension is expanded upstream.;; (define_insn "";; [(set (match_operand:DI 0 "mcore_arith_reg_operand" "=&r");; (plus:DI (match_operand:DI 1 "mcore_arith_reg_operand" "%0");; (zero_extend:DI (match_operand:SI 2 "mcore_arith_reg_operand" "r"))));; (clobber (reg:CC 17))];; "0";; "cmplt %R0,%R0\;addc %R0,%2\;inct %0";; [(set_attr "length" "6")]);; optimize "long long" + "signed long";; won't trigger because of how the extension is expanded upstream.;; (define_insn "";; [(set (match_operand:DI 0 "mcore_arith_reg_operand" "=&r");; (plus:DI (match_operand:DI 1 "mcore_arith_reg_operand" "%0");; (sign_extend:DI (match_operand:SI 2 "mcore_arith_reg_operand" "r"))));; (clobber (reg:CC 17))];; "0";; "cmplt %R0,%R0\;addc %R0,%2\;inct %0\;btsti %2,31\;dect %0";; [(set_attr "length" "6")])(define_insn "subdi3"[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=&r")(minus:DI (match_operand:DI 1 "mcore_arith_reg_operand" "0")(match_operand:DI 2 "mcore_arith_reg_operand" "r")))(clobber (reg:CC 17))]"""*{if (TARGET_LITTLE_END)return \"cmphs %0,%0\;subc %0,%2\;subc %R0,%R2\";return \"cmphs %R0,%R0\;subc %R0,%R2\;subc %0,%2\";}"[(set_attr "length" "6")]);; -------------------------------------------------------------------------;; Multiplication instructions;; -------------------------------------------------------------------------(define_insn "mulsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(mult:SI (match_operand:SI 1 "mcore_arith_reg_operand" "%0")(match_operand:SI 2 "mcore_arith_reg_operand" "r")))]"""mult %0,%2");;;; 32/32 signed division -- added to the MCORE instruction set spring 1997;;;; Different constraints based on the architecture revision...;;(define_expand "divsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(div:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))]"TARGET_DIV""");; MCORE Revision 1.50: restricts the divisor to be in r1. (6/97);;(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(div:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0")(match_operand:SI 2 "mcore_arith_reg_operand" "b")))]"TARGET_DIV""divs %0,%2");;;; 32/32 signed division -- added to the MCORE instruction set spring 1997;;;; Different constraints based on the architecture revision...;;(define_expand "udivsi3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(udiv:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))]"TARGET_DIV""");; MCORE Revision 1.50: restricts the divisor to be in r1. (6/97)(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(udiv:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0")(match_operand:SI 2 "mcore_arith_reg_operand" "b")))]"TARGET_DIV""divu %0,%2");; -------------------------------------------------------------------------;; Unary arithmetic;; -------------------------------------------------------------------------(define_insn "negsi2"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(neg:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0")))]"""*{return \"rsubi %0,0\";}")(define_insn "abssi2"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(abs:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0")))]"""abs %0")(define_insn "negdi2"[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=&r")(neg:DI (match_operand:DI 1 "mcore_arith_reg_operand" "0")))(clobber (reg:CC 17))]"""*{if (TARGET_LITTLE_END)return \"cmpnei %0,0\\n\\trsubi %0,0\\n\\tnot %R0\\n\\tincf %R0\";return \"cmpnei %R0,0\\n\\trsubi %R0,0\\n\\tnot %0\\n\\tincf %0\";}"[(set_attr "length" "8")])(define_insn "one_cmplsi2"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(not:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0")))]"""not %0");; -------------------------------------------------------------------------;; Zero extension instructions;; -------------------------------------------------------------------------(define_expand "zero_extendhisi2"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(zero_extend:SI (match_operand:HI 1 "mcore_arith_reg_operand" "")))]"""")(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r")(zero_extend:SI (match_operand:HI 1 "general_operand" "0,m")))]"""@zexth %0ld.h %0,%1"[(set_attr "type" "shift,load")]);; ldh gives us a free zero-extension. The combiner picks up on this.(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(zero_extend:SI (mem:HI (match_operand:SI 1 "mcore_arith_reg_operand" "r"))))]"""ld.h %0,(%1)"[(set_attr "type" "load")])(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(zero_extend:SI (mem:HI (plus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r")(match_operand:SI 2 "const_int_operand" "")))))]"(INTVAL (operands[2]) >= 0) &&(INTVAL (operands[2]) < 32) &&((INTVAL (operands[2])&1) == 0)""ld.h %0,(%1,%2)"[(set_attr "type" "load")])(define_expand "zero_extendqisi2"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(zero_extend:SI (match_operand:QI 1 "general_operand" "")))]"""");; RBE: XXX: we don't recognize that the xtrb3 kills the CC register.(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,b,r")(zero_extend:SI (match_operand:QI 1 "general_operand" "0,r,m")))]"""@zextb %0xtrb3 %0,%1ld.b %0,%1"[(set_attr "type" "shift,shift,load")]);; ldb gives us a free zero-extension. The combiner picks up on this.(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(zero_extend:SI (mem:QI (match_operand:SI 1 "mcore_arith_reg_operand" "r"))))]"""ld.b %0,(%1)"[(set_attr "type" "load")])(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(zero_extend:SI (mem:QI (plus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r")(match_operand:SI 2 "const_int_operand" "")))))]"(INTVAL (operands[2]) >= 0) &&(INTVAL (operands[2]) < 16)""ld.b %0,(%1,%2)"[(set_attr "type" "load")])(define_expand "zero_extendqihi2"[(set (match_operand:HI 0 "mcore_arith_reg_operand" "")(zero_extend:HI (match_operand:QI 1 "general_operand" "")))]"""");; RBE: XXX: we don't recognize that the xtrb3 kills the CC register.(define_insn ""[(set (match_operand:HI 0 "mcore_arith_reg_operand" "=r,b,r")(zero_extend:HI (match_operand:QI 1 "general_operand" "0,r,m")))]"""@zextb %0xtrb3 %0,%1ld.b %0,%1"[(set_attr "type" "shift,shift,load")]);; ldb gives us a free zero-extension. The combiner picks up on this.;; this doesn't catch references that are into a structure.;; note that normally the compiler uses the above insn, unless it turns;; out that we're dealing with a volatile...(define_insn ""[(set (match_operand:HI 0 "mcore_arith_reg_operand" "=r")(zero_extend:HI (mem:QI (match_operand:SI 1 "mcore_arith_reg_operand" "r"))))]"""ld.b %0,(%1)"[(set_attr "type" "load")])(define_insn ""[(set (match_operand:HI 0 "mcore_arith_reg_operand" "=r")(zero_extend:HI (mem:QI (plus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r")(match_operand:SI 2 "const_int_operand" "")))))]"(INTVAL (operands[2]) >= 0) &&(INTVAL (operands[2]) < 16)""ld.b %0,(%1,%2)"[(set_attr "type" "load")]);; -------------------------------------------------------------------------;; Sign extension instructions;; -------------------------------------------------------------------------(define_expand "extendsidi2"[(set (match_operand:DI 0 "mcore_arith_reg_operand" "=r")(match_operand:SI 1 "mcore_arith_reg_operand" "r"))]"""{int low, high;if (TARGET_LITTLE_END)low = 0, high = 4;elselow = 4, high = 0;emit_insn (gen_rtx_SET (VOIDmode, gen_rtx_SUBREG (SImode, operands[0], low),operands[1]));emit_insn (gen_rtx_SET (VOIDmode, gen_rtx_SUBREG (SImode, operands[0], high),gen_rtx_ASHIFTRT (SImode,gen_rtx_SUBREG (SImode, operands[0], low),GEN_INT (31))));DONE;}")(define_insn "extendhisi2"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(sign_extend:SI (match_operand:HI 1 "mcore_arith_reg_operand" "0")))]"""sexth %0")(define_insn "extendqisi2"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(sign_extend:SI (match_operand:QI 1 "mcore_arith_reg_operand" "0")))]"""sextb %0")(define_insn "extendqihi2"[(set (match_operand:HI 0 "mcore_arith_reg_operand" "=r")(sign_extend:HI (match_operand:QI 1 "mcore_arith_reg_operand" "0")))]"""sextb %0");; -------------------------------------------------------------------------;; Move instructions;; -------------------------------------------------------------------------;; SImode(define_expand "movsi"[(set (match_operand:SI 0 "general_operand" "")(match_operand:SI 1 "general_operand" ""))]"""{if (GET_CODE (operands[0]) == MEM)operands[1] = force_reg (SImode, operands[1]);}")(define_insn ""[(set (match_operand:SI 0 "mcore_general_movdst_operand" "=r,r,a,r,a,r,m")(match_operand:SI 1 "mcore_general_movsrc_operand" "r,P,i,c,R,m,r"))]"(register_operand (operands[0], SImode)|| register_operand (operands[1], SImode))""* return mcore_output_move (insn, operands, SImode);"[(set_attr "type" "move,move,move,move,load,load,store")]);;;; HImode;;(define_expand "movhi"[(set (match_operand:HI 0 "general_operand" "")(match_operand:HI 1 "general_operand" ""))]"""{if (GET_CODE (operands[0]) == MEM)operands[1] = force_reg (HImode, operands[1]);else if (CONSTANT_P (operands[1])&& (GET_CODE (operands[1]) != CONST_INT|| (! CONST_OK_FOR_I (INTVAL (operands[1]))&& ! CONST_OK_FOR_M (INTVAL (operands[1]))&& ! CONST_OK_FOR_N (INTVAL (operands[1]))))&& ! reload_completed && ! reload_in_progress){rtx reg = gen_reg_rtx (SImode);emit_insn (gen_movsi (reg, operands[1]));operands[1] = gen_lowpart (HImode, reg);}}")(define_insn ""[(set (match_operand:HI 0 "mcore_general_movdst_operand" "=r,r,a,r,r,m")(match_operand:HI 1 "mcore_general_movsrc_operand" "r,P,i,c,m,r"))]"(register_operand (operands[0], HImode)|| register_operand (operands[1], HImode))""* return mcore_output_move (insn, operands, HImode);"[(set_attr "type" "move,move,move,move,load,store")]);;;; QImode;;(define_expand "movqi"[(set (match_operand:QI 0 "general_operand" "")(match_operand:QI 1 "general_operand" ""))]"""{if (GET_CODE (operands[0]) == MEM)operands[1] = force_reg (QImode, operands[1]);else if (CONSTANT_P (operands[1])&& (GET_CODE (operands[1]) != CONST_INT|| (! CONST_OK_FOR_I (INTVAL (operands[1]))&& ! CONST_OK_FOR_M (INTVAL (operands[1]))&& ! CONST_OK_FOR_N (INTVAL (operands[1]))))&& ! reload_completed && ! reload_in_progress){rtx reg = gen_reg_rtx (SImode);emit_insn (gen_movsi (reg, operands[1]));operands[1] = gen_lowpart (QImode, reg);}}")(define_insn ""[(set (match_operand:QI 0 "mcore_general_movdst_operand" "=r,r,a,r,r,m")(match_operand:QI 1 "mcore_general_movsrc_operand" "r,P,i,c,m,r"))]"(register_operand (operands[0], QImode)|| register_operand (operands[1], QImode))""* return mcore_output_move (insn, operands, QImode);"[(set_attr "type" "move,move,move,move,load,store")]);; DImode(define_expand "movdi"[(set (match_operand:DI 0 "general_operand" "")(match_operand:DI 1 "general_operand" ""))]"""{if (GET_CODE (operands[0]) == MEM)operands[1] = force_reg (DImode, operands[1]);else if (GET_CODE (operands[1]) == CONST_INT&& ! CONST_OK_FOR_I (INTVAL (operands[1]))&& ! CONST_OK_FOR_M (INTVAL (operands[1]))&& ! CONST_OK_FOR_N (INTVAL (operands[1]))){int i;for (i = 0; i < UNITS_PER_WORD * 2; i += UNITS_PER_WORD)emit_move_insn (simplify_gen_subreg (SImode, operands[0], DImode, i),simplify_gen_subreg (SImode, operands[1], DImode, i));DONE;}}")(define_insn "movdi_i"[(set (match_operand:DI 0 "general_operand" "=r,r,r,r,a,r,m")(match_operand:DI 1 "mcore_general_movsrc_operand" "I,M,N,r,R,m,r"))]"""* return mcore_output_movedouble (operands, DImode);"[(set_attr "length" "4") (set_attr "type" "move,move,move,move,load,load,store")]);; SFmode(define_expand "movsf"[(set (match_operand:SF 0 "general_operand" "")(match_operand:SF 1 "general_operand" ""))]"""{if (GET_CODE (operands[0]) == MEM)operands[1] = force_reg (SFmode, operands[1]);}")(define_insn "movsf_i"[(set (match_operand:SF 0 "general_operand" "=r,r,m")(match_operand:SF 1 "general_operand" "r,m,r"))]"""@mov %0,%1ld.w %0,%1st.w %1,%0"[(set_attr "type" "move,load,store")]);; DFmode(define_expand "movdf"[(set (match_operand:DF 0 "general_operand" "")(match_operand:DF 1 "general_operand" ""))]"""{if (GET_CODE (operands[0]) == MEM)operands[1] = force_reg (DFmode, operands[1]);}")(define_insn "movdf_k"[(set (match_operand:DF 0 "general_operand" "=r,r,m")(match_operand:DF 1 "general_operand" "r,m,r"))]"""* return mcore_output_movedouble (operands, DFmode);"[(set_attr "length" "4") (set_attr "type" "move,load,store")]);; Load/store multiple;; ??? This is not currently used.(define_insn "ldm"[(set (match_operand:TI 0 "mcore_arith_reg_operand" "=r")(mem:TI (match_operand:SI 1 "mcore_arith_reg_operand" "r")))]"""ldq %U0,(%1)");; ??? This is not currently used.(define_insn "stm"[(set (mem:TI (match_operand:SI 0 "mcore_arith_reg_operand" "r"))(match_operand:TI 1 "mcore_arith_reg_operand" "r"))]"""stq %U1,(%0)")(define_expand "load_multiple"[(match_par_dup 3 [(set (match_operand:SI 0 "" "")(match_operand:SI 1 "" ""))(use (match_operand:SI 2 "" ""))])]"""{int regno, count, i;/* Support only loading a constant number of registers from memory andonly if at least two registers. The last register must be r15. */if (GET_CODE (operands[2]) != CONST_INT|| INTVAL (operands[2]) < 2|| GET_CODE (operands[1]) != MEM|| XEXP (operands[1], 0) != stack_pointer_rtx|| GET_CODE (operands[0]) != REG|| REGNO (operands[0]) + INTVAL (operands[2]) != 16)FAIL;count = INTVAL (operands[2]);regno = REGNO (operands[0]);operands[3] = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count));for (i = 0; i < count; i++)XVECEXP (operands[3], 0, i)= gen_rtx_SET (VOIDmode,gen_rtx_REG (SImode, regno + i),gen_rtx_MEM (SImode, plus_constant (stack_pointer_rtx,i * 4)));}")(define_insn ""[(match_parallel 0 "mcore_load_multiple_operation"[(set (match_operand:SI 1 "mcore_arith_reg_operand" "=r")(mem:SI (match_operand:SI 2 "register_operand" "r")))])]"GET_CODE (operands[2]) == REG && REGNO (operands[2]) == STACK_POINTER_REGNUM""ldm %1-r15,(%2)")(define_expand "store_multiple"[(match_par_dup 3 [(set (match_operand:SI 0 "" "")(match_operand:SI 1 "" ""))(use (match_operand:SI 2 "" ""))])]"""{int regno, count, i;/* Support only storing a constant number of registers to memory andonly if at least two registers. The last register must be r15. */if (GET_CODE (operands[2]) != CONST_INT|| INTVAL (operands[2]) < 2|| GET_CODE (operands[0]) != MEM|| XEXP (operands[0], 0) != stack_pointer_rtx|| GET_CODE (operands[1]) != REG|| REGNO (operands[1]) + INTVAL (operands[2]) != 16)FAIL;count = INTVAL (operands[2]);regno = REGNO (operands[1]);operands[3] = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (count));for (i = 0; i < count; i++)XVECEXP (operands[3], 0, i)= gen_rtx_SET (VOIDmode,gen_rtx_MEM (SImode, plus_constant (stack_pointer_rtx,i * 4)),gen_rtx_REG (SImode, regno + i));}")(define_insn ""[(match_parallel 0 "mcore_store_multiple_operation"[(set (mem:SI (match_operand:SI 2 "register_operand" "r"))(match_operand:SI 1 "mcore_arith_reg_operand" "r"))])]"GET_CODE (operands[2]) == REG && REGNO (operands[2]) == STACK_POINTER_REGNUM""stm %1-r15,(%2)");; ------------------------------------------------------------------------;; Define the real conditional branch instructions.;; ------------------------------------------------------------------------;; At top-level, condition test are eq/ne, because we;; are comparing against the condition register (which;; has the result of the true relational test(define_insn "branch_true"[(set (pc) (if_then_else (ne (reg:CC 17) (const_int 0))(label_ref (match_operand 0 "" ""))(pc)))]"""jbt %l0"[(set_attr "type" "brcond")])(define_insn "branch_false"[(set (pc) (if_then_else (eq (reg:CC 17) (const_int 0))(label_ref (match_operand 0 "" ""))(pc)))]"""jbf %l0"[(set_attr "type" "brcond")])(define_insn "inverse_branch_true"[(set (pc) (if_then_else (ne (reg:CC 17) (const_int 0))(pc)(label_ref (match_operand 0 "" ""))))]"""jbf %l0"[(set_attr "type" "brcond")])(define_insn "inverse_branch_false"[(set (pc) (if_then_else (eq (reg:CC 17) (const_int 0))(pc)(label_ref (match_operand 0 "" ""))))]"""jbt %l0"[(set_attr "type" "brcond")]);; Conditional branch insns(define_expand "cbranchsi4"[(set (pc)(if_then_else (match_operator:SI 0 "ordered_comparison_operator"[(match_operand:SI 1 "mcore_compare_operand")(match_operand:SI 2 "nonmemory_operand")])(label_ref (match_operand 3 ""))(pc)))]"""{bool invert;invert = mcore_gen_compare (GET_CODE (operands[0]),operands[1], operands[2]);if (invert)emit_jump_insn (gen_branch_false (operands[3]));elseemit_jump_insn (gen_branch_true (operands[3]));DONE;}");; ------------------------------------------------------------------------;; Jump and linkage insns;; ------------------------------------------------------------------------(define_insn "jump_real"[(set (pc)(label_ref (match_operand 0 "" "")))]"""jbr %l0"[(set_attr "type" "branch")])(define_expand "jump"[(set (pc) (label_ref (match_operand 0 "" "")))]"""{emit_jump_insn (gen_jump_real (operand0));DONE;}")(define_insn "indirect_jump"[(set (pc)(match_operand:SI 0 "mcore_arith_reg_operand" "r"))]"""jmp %0"[(set_attr "type" "jmp")])(define_expand "call"[(parallel[(call (match_operand:SI 0 "" "")(match_operand 1 "" ""))(clobber (reg:SI 15))])]"""{if (GET_CODE (operands[0]) == MEM&& ! register_operand (XEXP (operands[0], 0), SImode)&& ! mcore_symbolic_address_p (XEXP (operands[0], 0)))operands[0] = gen_rtx_MEM (GET_MODE (operands[0]),force_reg (Pmode, XEXP (operands[0], 0)));}")(define_insn "call_internal"[(call (mem:SI (match_operand:SI 0 "mcore_call_address_operand" "riR"))(match_operand 1 "" ""))(clobber (reg:SI 15))]"""* return mcore_output_call (operands, 0);")(define_expand "call_value"[(parallel[(set (match_operand 0 "register_operand" "")(call (match_operand:SI 1 "" "")(match_operand 2 "" "")))(clobber (reg:SI 15))])]"""{if (GET_CODE (operands[0]) == MEM&& ! register_operand (XEXP (operands[0], 0), SImode)&& ! mcore_symbolic_address_p (XEXP (operands[0], 0)))operands[1] = gen_rtx_MEM (GET_MODE (operands[1]),force_reg (Pmode, XEXP (operands[1], 0)));}")(define_insn "call_value_internal"[(set (match_operand 0 "register_operand" "=r")(call (mem:SI (match_operand:SI 1 "mcore_call_address_operand" "riR"))(match_operand 2 "" "")))(clobber (reg:SI 15))]"""* return mcore_output_call (operands, 1);")(define_insn "call_value_struct"[(parallel [(set (match_parallel 0 ""[(expr_list (match_operand 3 "register_operand" "") (match_operand 4 "immediate_operand" ""))(expr_list (match_operand 5 "register_operand" "") (match_operand 6 "immediate_operand" ""))])(call (match_operand:SI 1 "" "")(match_operand 2 "" "")))(clobber (reg:SI 15))])]"""* return mcore_output_call (operands, 1);");; ------------------------------------------------------------------------;; Misc insns;; ------------------------------------------------------------------------(define_insn "nop"[(const_int 0)]"""or r0,r0")(define_insn "tablejump"[(set (pc)(match_operand:SI 0 "mcore_arith_reg_operand" "r"))(use (label_ref (match_operand 1 "" "")))]"""jmp %0"[(set_attr "type" "jmp")])(define_insn "*return"[(return)]"reload_completed && ! mcore_naked_function_p ()""jmp r15"[(set_attr "type" "jmp")])(define_insn "*no_return"[(return)]"reload_completed && mcore_naked_function_p ()"""[(set_attr "length" "0")])(define_expand "prologue"[(const_int 0)]"""mcore_expand_prolog (); DONE;")(define_expand "epilogue"[(return)]"""mcore_expand_epilog ();");; ------------------------------------------------------------------------;; Scc instructions;; ------------------------------------------------------------------------(define_insn "mvc"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(ne:SI (reg:CC 17) (const_int 0)))]"""mvc %0"[(set_attr "type" "move")])(define_insn "mvcv"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(eq:SI (reg:CC 17) (const_int 0)))]"""mvcv %0"[(set_attr "type" "move")]); in 0.97 use (LE 0) with (LT 1) and complement c. BRC(define_split[(parallel[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(ne:SI (gt:CC (match_operand:SI 1 "mcore_arith_reg_operand" "")(const_int 0))(const_int 0)))(clobber (reg:SI 17))])]""[(set (reg:CC 17)(lt:CC (match_dup 1) (const_int 1)))(set (match_dup 0) (eq:SI (reg:CC 17) (const_int 0)))])(define_expand "cstoresi4"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operator:SI 1 "ordered_comparison_operator"[(match_operand:SI 2 "mcore_compare_operand" "")(match_operand:SI 3 "nonmemory_operand" "")]))]"""{bool invert;invert = mcore_gen_compare (GET_CODE (operands[1]),operands[2], operands[3]);if (invert)emit_insn (gen_mvcv (operands[0]));elseemit_insn (gen_mvc (operands[0]));DONE;}")(define_insn "incscc"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(plus:SI (ne (reg:CC 17) (const_int 0))(match_operand:SI 1 "mcore_arith_reg_operand" "0")))]"""inct %0")(define_insn "incscc_false"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(plus:SI (eq (reg:CC 17) (const_int 0))(match_operand:SI 1 "mcore_arith_reg_operand" "0")))]"""incf %0")(define_insn "decscc"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(minus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0")(ne (reg:CC 17) (const_int 0))))]"""dect %0")(define_insn "decscc_false"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(minus:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0")(eq (reg:CC 17) (const_int 0))))]"""decf %0");; ------------------------------------------------------------------------;; Conditional move patterns.;; ------------------------------------------------------------------------(define_expand "smaxsi3"[(set (reg:CC 17)(lt:CC (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(if_then_else:SI (eq (reg:CC 17) (const_int 0))(match_dup 1) (match_dup 2)))]"""")(define_split[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(smax:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))]""[(set (reg:CC 17)(lt:SI (match_dup 1) (match_dup 2)))(set (match_dup 0)(if_then_else:SI (eq (reg:CC 17) (const_int 0))(match_dup 1) (match_dup 2)))]""); no tstgt in 0.97, so just use cmplti (btsti x,31) and reverse move; condition BRC(define_split[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(smax:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(const_int 0)))]""[(set (reg:CC 17)(lt:CC (match_dup 1) (const_int 0)))(set (match_dup 0)(if_then_else:SI (eq (reg:CC 17) (const_int 0))(match_dup 1) (const_int 0)))]"")(define_expand "sminsi3"[(set (reg:CC 17)(lt:CC (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(if_then_else:SI (ne (reg:CC 17) (const_int 0))(match_dup 1) (match_dup 2)))]"""")(define_split[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(smin:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))]""[(set (reg:CC 17)(lt:SI (match_dup 1) (match_dup 2)))(set (match_dup 0)(if_then_else:SI (ne (reg:CC 17) (const_int 0))(match_dup 1) (match_dup 2)))]"");(define_split; [(set (match_operand:SI 0 "mcore_arith_reg_operand" ""); (smin:SI (match_operand:SI 1 "mcore_arith_reg_operand" ""); (const_int 0)))]; ""; [(set (reg:CC 17); (gt:CC (match_dup 1) (const_int 0))); (set (match_dup 0); (if_then_else:SI (eq (reg:CC 17) (const_int 0)); (match_dup 1) (const_int 0)))]; ""); changed these unsigned patterns to use geu instead of ltu. it appears; that the c-torture & ssrl test suites didn't catch these! only showed; up in friedman's clib work. BRC 7/7/95(define_expand "umaxsi3"[(set (reg:CC 17)(geu:CC (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(if_then_else:SI (eq (reg:CC 17) (const_int 0))(match_dup 2) (match_dup 1)))]"""")(define_split[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(umax:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))]""[(set (reg:CC 17)(geu:SI (match_dup 1) (match_dup 2)))(set (match_dup 0)(if_then_else:SI (eq (reg:CC 17) (const_int 0))(match_dup 2) (match_dup 1)))]"")(define_expand "uminsi3"[(set (reg:CC 17)(geu:CC (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(if_then_else:SI (ne (reg:CC 17) (const_int 0))(match_dup 2) (match_dup 1)))]"""")(define_split[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(umin:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "mcore_arith_reg_operand" "")))]""[(set (reg:CC 17)(geu:SI (match_dup 1) (match_dup 2)))(set (match_dup 0)(if_then_else:SI (ne (reg:CC 17) (const_int 0))(match_dup 2) (match_dup 1)))]"");; ------------------------------------------------------------------------;; conditional move patterns really start here;; ------------------------------------------------------------------------;; the "movtK" patterns are experimental. they are intended to account for;; gcc's mucking on code such as:;;;; free_ent = ((block_compress) ? 257 : 256 );;;;; these patterns help to get a tstne/bgeni/inct (or equivalent) sequence;; when both arms have constants that are +/- 1 of each other.;;;; note in the following patterns that the "movtK" ones should be the first;; one defined in each sequence. this is because the general pattern also;; matches, so use ordering to determine priority (it's easier this way than;; adding conditions to the general patterns). BRC;;;; the U and Q constraints are necessary to ensure that reload does the;; 'right thing'. U constrains the operand to 0 and Q to 1 for use in the;; clrt & clrf and clrt/inct & clrf/incf patterns. BRC 6/26;;;; ??? there appears to be some problems with these movtK patterns for ops;; other than eq & ne. need to fix. 6/30 BRC;; ------------------------------------------------------------------------;; ne;; ------------------------------------------------------------------------; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_1"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(ne (reg:CC 17) (const_int 0))(match_operand:SI 1 "mcore_arith_O_operand" "O")(match_operand:SI 2 "mcore_arith_O_operand" "O")))]" GET_CODE (operands[1]) == CONST_INT&& GET_CODE (operands[2]) == CONST_INT&& ( (INTVAL (operands[1]) - INTVAL (operands[2]) == 1)|| (INTVAL (operands[2]) - INTVAL (operands[1]) == 1))""* return mcore_output_cmov (operands, 1, NULL);"[(set_attr "length" "4")])(define_insn "movt0"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI(ne (reg:CC 17) (const_int 0))(match_operand:SI 1 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 2 "mcore_arith_imm_operand" "0,r,0,U")))]"""@movt %0,%1movf %0,%2clrt %0clrf %0");; ------------------------------------------------------------------------;; eq;; ------------------------------------------------------------------------; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_2"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(eq (reg:CC 17) (const_int 0))(match_operand:SI 1 "mcore_arith_O_operand" "O")(match_operand:SI 2 "mcore_arith_O_operand" "O")))]" GET_CODE (operands[1]) == CONST_INT&& GET_CODE (operands[2]) == CONST_INT&& ( (INTVAL (operands[1]) - INTVAL (operands[2]) == 1)|| (INTVAL (operands[2]) - INTVAL (operands[1]) == 1))""* return mcore_output_cmov (operands, 0, NULL);"[(set_attr "length" "4")])(define_insn "movf0"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI(eq (reg:CC 17) (const_int 0))(match_operand:SI 1 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 2 "mcore_arith_imm_operand" "0,r,0,U")))]"""@movf %0,%1movt %0,%2clrf %0clrt %0"); turns lsli rx,imm/btsti rx,31 into btsti rx,imm. not done by a peephole; because the instructions are not adjacent (peepholes are related by posn -; not by dataflow). BRC(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI (eq (zero_extract:SI(match_operand:SI 1 "mcore_arith_reg_operand" "r,r,r,r")(const_int 1)(match_operand:SI 2 "mcore_literal_K_operand" "K,K,K,K"))(const_int 0))(match_operand:SI 3 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 4 "mcore_arith_imm_operand" "0,r,0,U")))]"""@btsti %1,%2\;movf %0,%3btsti %1,%2\;movt %0,%4btsti %1,%2\;clrf %0btsti %1,%2\;clrt %0"[(set_attr "length" "4")]); turns sextb rx/btsti rx,31 into btsti rx,7. must be QImode to be safe. BRC(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI (eq (lshiftrt:SI(match_operand:SI 1 "mcore_arith_reg_operand" "r,r,r,r")(const_int 7))(const_int 0))(match_operand:SI 2 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 3 "mcore_arith_imm_operand" "0,r,0,U")))]"GET_CODE (operands[1]) == SUBREG &&GET_MODE (SUBREG_REG (operands[1])) == QImode""@btsti %1,7\;movf %0,%2btsti %1,7\;movt %0,%3btsti %1,7\;clrf %0btsti %1,7\;clrt %0"[(set_attr "length" "4")]);; ------------------------------------------------------------------------;; ne;; ------------------------------------------------------------------------;; Combine creates this from an andn instruction in a scc sequence.;; We must recognize it to get conditional moves generated.; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(ne (match_operand:SI 1 "mcore_arith_reg_operand" "r")(const_int 0))(match_operand:SI 2 "mcore_arith_O_operand" "O")(match_operand:SI 3 "mcore_arith_O_operand" "O")))]" GET_CODE (operands[2]) == CONST_INT&& GET_CODE (operands[3]) == CONST_INT&& ( (INTVAL (operands[2]) - INTVAL (operands[3]) == 1)|| (INTVAL (operands[3]) - INTVAL (operands[2]) == 1))""*{rtx out_operands[4];out_operands[0] = operands[0];out_operands[1] = operands[2];out_operands[2] = operands[3];out_operands[3] = operands[1];return mcore_output_cmov (out_operands, 1, \"cmpnei %3,0\");}"[(set_attr "length" "6")])(define_insn "movt2"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI (ne (match_operand:SI 1 "mcore_arith_reg_operand" "r,r,r,r")(const_int 0))(match_operand:SI 2 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 3 "mcore_arith_imm_operand" "0,r,0,U")))]"""@cmpnei %1,0\;movt %0,%2cmpnei %1,0\;movf %0,%3cmpnei %1,0\;clrt %0cmpnei %1,0\;clrf %0"[(set_attr "length" "4")]); turns lsli rx,imm/btsti rx,31 into btsti rx,imm. not done by a peephole; because the instructions are not adjacent (peepholes are related by posn -; not by dataflow). BRC(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI (ne (zero_extract:SI(match_operand:SI 1 "mcore_arith_reg_operand" "r,r,r,r")(const_int 1)(match_operand:SI 2 "mcore_literal_K_operand" "K,K,K,K"))(const_int 0))(match_operand:SI 3 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 4 "mcore_arith_imm_operand" "0,r,0,U")))]"""@btsti %1,%2\;movt %0,%3btsti %1,%2\;movf %0,%4btsti %1,%2\;clrt %0btsti %1,%2\;clrf %0"[(set_attr "length" "4")]); turns sextb rx/btsti rx,31 into btsti rx,7. must be QImode to be safe. BRC(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI (ne (lshiftrt:SI(match_operand:SI 1 "mcore_arith_reg_operand" "r,r,r,r")(const_int 7))(const_int 0))(match_operand:SI 2 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 3 "mcore_arith_imm_operand" "0,r,0,U")))]"GET_CODE (operands[1]) == SUBREG &&GET_MODE (SUBREG_REG (operands[1])) == QImode""@btsti %1,7\;movt %0,%2btsti %1,7\;movf %0,%3btsti %1,7\;clrt %0btsti %1,7\;clrf %0"[(set_attr "length" "4")]);; ------------------------------------------------------------------------;; eq/eq;; ------------------------------------------------------------------------; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_4"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(eq (eq:SI (reg:CC 17) (const_int 0)) (const_int 0))(match_operand:SI 1 "mcore_arith_O_operand" "O")(match_operand:SI 2 "mcore_arith_O_operand" "O")))]"GET_CODE (operands[1]) == CONST_INT &&GET_CODE (operands[2]) == CONST_INT &&((INTVAL (operands[1]) - INTVAL (operands[2]) == 1) ||(INTVAL (operands[2]) - INTVAL (operands[1]) == 1))""* return mcore_output_cmov(operands, 1, NULL);"[(set_attr "length" "4")])(define_insn "movt3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI(eq (eq:SI (reg:CC 17) (const_int 0)) (const_int 0))(match_operand:SI 1 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 2 "mcore_arith_imm_operand" "0,r,0,U")))]"""@movt %0,%1movf %0,%2clrt %0clrf %0");; ------------------------------------------------------------------------;; eq/ne;; ------------------------------------------------------------------------; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_5"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(eq (ne:SI (reg:CC 17) (const_int 0)) (const_int 0))(match_operand:SI 1 "mcore_arith_O_operand" "O")(match_operand:SI 2 "mcore_arith_O_operand" "O")))]"GET_CODE (operands[1]) == CONST_INT &&GET_CODE (operands[2]) == CONST_INT &&((INTVAL (operands[1]) - INTVAL (operands[2]) == 1) ||(INTVAL (operands[2]) - INTVAL (operands[1]) == 1))""* return mcore_output_cmov (operands, 0, NULL);"[(set_attr "length" "4")])(define_insn "movf1"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI(eq (ne:SI (reg:CC 17) (const_int 0)) (const_int 0))(match_operand:SI 1 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 2 "mcore_arith_imm_operand" "0,r,0,U")))]"""@movf %0,%1movt %0,%2clrf %0clrt %0");; ------------------------------------------------------------------------;; eq;; ------------------------------------------------------------------------;; Combine creates this from an andn instruction in a scc sequence.;; We must recognize it to get conditional moves generated.; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_6"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(eq (match_operand:SI 1 "mcore_arith_reg_operand" "r")(const_int 0))(match_operand:SI 2 "mcore_arith_O_operand" "O")(match_operand:SI 3 "mcore_arith_O_operand" "O")))]"GET_CODE (operands[1]) == CONST_INT &&GET_CODE (operands[2]) == CONST_INT &&((INTVAL (operands[2]) - INTVAL (operands[3]) == 1) ||(INTVAL (operands[3]) - INTVAL (operands[2]) == 1))""*{rtx out_operands[4];out_operands[0] = operands[0];out_operands[1] = operands[2];out_operands[2] = operands[3];out_operands[3] = operands[1];return mcore_output_cmov (out_operands, 0, \"cmpnei %3,0\");}"[(set_attr "length" "6")])(define_insn "movf3"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI (eq (match_operand:SI 1 "mcore_arith_reg_operand" "r,r,r,r")(const_int 0))(match_operand:SI 2 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 3 "mcore_arith_imm_operand" "0,r,0,U")))]"""@cmpnei %1,0\;movf %0,%2cmpnei %1,0\;movt %0,%3cmpnei %1,0\;clrf %0cmpnei %1,0\;clrt %0"[(set_attr "length" "4")]);; ------------------------------------------------------------------------;; ne/eq;; ------------------------------------------------------------------------; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_7"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(ne (eq:SI (reg:CC 17) (const_int 0)) (const_int 0))(match_operand:SI 1 "mcore_arith_O_operand" "O")(match_operand:SI 2 "mcore_arith_O_operand" "O")))]"GET_CODE (operands[1]) == CONST_INT &&GET_CODE (operands[2]) == CONST_INT &&((INTVAL (operands[1]) - INTVAL (operands[2]) == 1) ||(INTVAL (operands[2]) - INTVAL (operands[1]) == 1))""* return mcore_output_cmov (operands, 0, NULL);"[(set_attr "length" "4")])(define_insn "movf4"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI(ne (eq:SI (reg:CC 17) (const_int 0)) (const_int 0))(match_operand:SI 1 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 2 "mcore_arith_imm_operand" "0,r,0,U")))]"""@movf %0,%1movt %0,%2clrf %0clrt %0");; ------------------------------------------------------------------------;; ne/ne;; ------------------------------------------------------------------------; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_8"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(ne (ne:SI (reg:CC 17) (const_int 0)) (const_int 0))(match_operand:SI 1 "mcore_arith_O_operand" "O")(match_operand:SI 2 "mcore_arith_O_operand" "O")))]"GET_CODE (operands[1]) == CONST_INT &&GET_CODE (operands[2]) == CONST_INT &&((INTVAL (operands[1]) - INTVAL (operands[2]) == 1) ||(INTVAL (operands[2]) - INTVAL (operands[1]) == 1))""* return mcore_output_cmov (operands, 1, NULL);"[(set_attr "length" "4")])(define_insn "movt4"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI(ne (ne:SI (reg:CC 17) (const_int 0)) (const_int 0))(match_operand:SI 1 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 2 "mcore_arith_imm_operand" "0,r,0,U")))]"""@movt %0,%1movf %0,%2clrt %0clrf %0");; Also need patterns to recognize lt/ge, since otherwise the compiler will;; try to output not/asri/tstne/movf.;; ------------------------------------------------------------------------;; lt;; ------------------------------------------------------------------------; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_9"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(lt (match_operand:SI 1 "mcore_arith_reg_operand" "r")(const_int 0))(match_operand:SI 2 "mcore_arith_O_operand" "O")(match_operand:SI 3 "mcore_arith_O_operand" "O")))]"GET_CODE (operands[2]) == CONST_INT &&GET_CODE (operands[3]) == CONST_INT &&((INTVAL (operands[2]) - INTVAL (operands[3]) == 1) ||(INTVAL (operands[3]) - INTVAL (operands[2]) == 1))""*{rtx out_operands[4];out_operands[0] = operands[0];out_operands[1] = operands[2];out_operands[2] = operands[3];out_operands[3] = operands[1];return mcore_output_cmov (out_operands, 1, \"btsti %3,31\");}"[(set_attr "length" "6")])(define_insn "movt5"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI (lt (match_operand:SI 1 "mcore_arith_reg_operand" "r,r,r,r")(const_int 0))(match_operand:SI 2 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 3 "mcore_arith_imm_operand" "0,r,0,U")))]"""@btsti %1,31\;movt %0,%2btsti %1,31\;movf %0,%3btsti %1,31\;clrt %0btsti %1,31\;clrf %0"[(set_attr "length" "4")]);; ------------------------------------------------------------------------;; ge;; ------------------------------------------------------------------------; experimental conditional move with two constants +/- 1 BRC(define_insn "movtK_10"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(if_then_else:SI(ge (match_operand:SI 1 "mcore_arith_reg_operand" "r")(const_int 0))(match_operand:SI 2 "mcore_arith_O_operand" "O")(match_operand:SI 3 "mcore_arith_O_operand" "O")))]"GET_CODE (operands[2]) == CONST_INT &&GET_CODE (operands[3]) == CONST_INT &&((INTVAL (operands[2]) - INTVAL (operands[3]) == 1) ||(INTVAL (operands[3]) - INTVAL (operands[2]) == 1))""*{rtx out_operands[4];out_operands[0] = operands[0];out_operands[1] = operands[2];out_operands[2] = operands[3];out_operands[3] = operands[1];return mcore_output_cmov (out_operands, 0, \"btsti %3,31\");}"[(set_attr "length" "6")])(define_insn "movf5"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,r,r,r")(if_then_else:SI (ge (match_operand:SI 1 "mcore_arith_reg_operand" "r,r,r,r")(const_int 0))(match_operand:SI 2 "mcore_arith_imm_operand" "r,0,U,0")(match_operand:SI 3 "mcore_arith_imm_operand" "0,r,0,U")))]"""@btsti %1,31\;movf %0,%2btsti %1,31\;movt %0,%3btsti %1,31\;clrf %0btsti %1,31\;clrt %0"[(set_attr "length" "4")]);; ------------------------------------------------------------------------;; Bitfield extract (xtrbN);; ------------------------------------------------------------------------; sometimes we're better off using QI/HI mode and letting the machine indep.; part expand insv and extv.;; e.g., sequences like:a [an insertion];; ldw r8,(r6); movi r7,0x00ffffff; and r8,r7 r7 dead; stw r8,(r6) r8 dead;; become:;; movi r8,0; stb r8,(r6) r8 dead;; it looks like always using SI mode is a win except in this type of code; (when adjacent bit fields collapse on a byte or halfword boundary). when; expanding with SI mode, non-adjacent bit field masks fold, but with QI/HI; mode, they do not. one thought is to add some peepholes to cover cases; like the above, but this is not a general solution.;; -mword-bitfields expands/inserts using SI mode. otherwise, do it with; the smallest mode possible (using the machine indep. expansions). BRC;(define_expand "extv"; [(set (match_operand:SI 0 "mcore_arith_reg_operand" ""); (sign_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" ""); (match_operand:SI 2 "const_int_operand" ""); (match_operand:SI 3 "const_int_operand" ""))); (clobber (reg:CC 17))]; ""; ";{; if (INTVAL (operands[1]) != 8 || INTVAL (operands[2]) % 8 != 0); {; if (TARGET_W_FIELD); {; rtx lshft = GEN_INT (32 - (INTVAL (operands[2]) + INTVAL (operands[3])));; rtx rshft = GEN_INT (32 - INTVAL (operands[2]));;; emit_insn (gen_rtx_SET (SImode, operands[0], operands[1]));; emit_insn (gen_rtx_SET (SImode, operands[0],; gen_rtx_ASHIFT (SImode, operands[0], lshft)));; emit_insn (gen_rtx_SET (SImode, operands[0],; gen_rtx_ASHIFTRT (SImode, operands[0], rshft)));; DONE;; }; else; FAIL;; };}")(define_expand "extv"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(sign_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "const_int_operand" "")(match_operand:SI 3 "const_int_operand" "")))(clobber (reg:CC 17))]"""{if (INTVAL (operands[2]) == 8 && INTVAL (operands[3]) % 8 == 0){/* 8-bit field, aligned properly, use the xtrb[0123]+sext sequence. *//* not DONE, not FAIL, but let the RTL get generated.... */}else if (TARGET_W_FIELD){/* Arbitrary placement; note that the tree->rtl generator will makesomething close to this if we return FAIL */rtx lshft = GEN_INT (32 - (INTVAL (operands[2]) + INTVAL (operands[3])));rtx rshft = GEN_INT (32 - INTVAL (operands[2]));rtx tmp1 = gen_reg_rtx (SImode);rtx tmp2 = gen_reg_rtx (SImode);emit_insn (gen_rtx_SET (SImode, tmp1, operands[1]));emit_insn (gen_rtx_SET (SImode, tmp2,gen_rtx_ASHIFT (SImode, tmp1, lshft)));emit_insn (gen_rtx_SET (SImode, operands[0],gen_rtx_ASHIFTRT (SImode, tmp2, rshft)));DONE;}else{/* Let the caller choose an alternate sequence. */FAIL;}}")(define_expand "extzv"[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(zero_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "")(match_operand:SI 2 "const_int_operand" "")(match_operand:SI 3 "const_int_operand" "")))(clobber (reg:CC 17))]"""{if (INTVAL (operands[2]) == 8 && INTVAL (operands[3]) % 8 == 0){/* 8-bit field, aligned properly, use the xtrb[0123] sequence. *//* Let the template generate some RTL.... */}else if (CONST_OK_FOR_K ((1 << INTVAL (operands[2])) - 1)){/* A narrow bit-field (<=5 bits) means we can do a shift to putit in place and then use an andi to extract it.This is as good as a shiftleft/shiftright. */rtx shifted;rtx mask = GEN_INT ((1 << INTVAL (operands[2])) - 1);if (INTVAL (operands[3]) == 0){shifted = operands[1];}else{rtx rshft = GEN_INT (INTVAL (operands[3]));shifted = gen_reg_rtx (SImode);emit_insn (gen_rtx_SET (SImode, shifted,gen_rtx_LSHIFTRT (SImode, operands[1], rshft)));}emit_insn (gen_rtx_SET (SImode, operands[0],gen_rtx_AND (SImode, shifted, mask)));DONE;}else if (TARGET_W_FIELD){/* Arbitrary pattern; play shift/shift games to get it.* this is pretty much what the caller will do if we say FAIL */rtx lshft = GEN_INT (32 - (INTVAL (operands[2]) + INTVAL (operands[3])));rtx rshft = GEN_INT (32 - INTVAL (operands[2]));rtx tmp1 = gen_reg_rtx (SImode);rtx tmp2 = gen_reg_rtx (SImode);emit_insn (gen_rtx_SET (SImode, tmp1, operands[1]));emit_insn (gen_rtx_SET (SImode, tmp2,gen_rtx_ASHIFT (SImode, tmp1, lshft)));emit_insn (gen_rtx_SET (SImode, operands[0],gen_rtx_LSHIFTRT (SImode, tmp2, rshft)));DONE;}else{/* Make the compiler figure out some alternative mechanism. */FAIL;}/* Emit the RTL pattern; something will match it later. */}")(define_expand "insv"[(set (zero_extract:SI (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operand:SI 1 "const_int_operand" "")(match_operand:SI 2 "const_int_operand" ""))(match_operand:SI 3 "general_operand" ""))(clobber (reg:CC 17))]"""{if (mcore_expand_insv (operands)){DONE;}else{FAIL;}}");;;; the xtrb[0123] instructions handily get at 8-bit fields on nice boundaries.;; but then, they do force you through r1.;;;; the combiner will build such patterns for us, so we'll make them available;; for its use.;;;; Note that we have both SIGNED and UNSIGNED versions of these...;;;;;; These no longer worry about the clobbering of CC bit; not sure this is;; good...;;;; the SIGNED versions of these;;(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,b")(sign_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0,r") (const_int 8) (const_int 24)))]"""@asri %0,24xtrb0 %0,%1\;sextb %0"[(set_attr "type" "shift")])(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=b")(sign_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r") (const_int 8) (const_int 16)))]"""xtrb1 %0,%1\;sextb %0"[(set_attr "type" "shift")])(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=b")(sign_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r") (const_int 8) (const_int 8)))]"""xtrb2 %0,%1\;sextb %0"[(set_attr "type" "shift")])(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(sign_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0") (const_int 8) (const_int 0)))]"""sextb %0"[(set_attr "type" "shift")]);; the UNSIGNED uses of xtrb[0123];;(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,b")(zero_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0,r") (const_int 8) (const_int 24)))]"""@lsri %0,24xtrb0 %0,%1"[(set_attr "type" "shift")])(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=b")(zero_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r") (const_int 8) (const_int 16)))]"""xtrb1 %0,%1"[(set_attr "type" "shift")])(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=b")(zero_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "r") (const_int 8) (const_int 8)))]"""xtrb2 %0,%1"[(set_attr "type" "shift")]);; This can be peepholed if it follows a ldb ...(define_insn ""[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r,b")(zero_extract:SI (match_operand:SI 1 "mcore_arith_reg_operand" "0,r") (const_int 8) (const_int 0)))]"""@zextb %0xtrb3 %0,%1\;zextb %0"[(set_attr "type" "shift")]);; ------------------------------------------------------------------------;; Block move - adapted from m88k.md;; ------------------------------------------------------------------------(define_expand "movmemsi"[(parallel [(set (mem:BLK (match_operand:BLK 0 "" ""))(mem:BLK (match_operand:BLK 1 "" "")))(use (match_operand:SI 2 "general_operand" ""))(use (match_operand:SI 3 "immediate_operand" ""))])]"""{if (mcore_expand_block_move (operands))DONE;elseFAIL;}");; ;;; ??? These patterns are meant to be generated from expand_block_move,;; ;;; but they currently are not.;;;; (define_insn "";; [(set (match_operand:QI 0 "mcore_arith_reg_operand" "=r");; (match_operand:BLK 1 "mcore_general_movsrc_operand" "m"))];; "";; "ld.b %0,%1";; [(set_attr "type" "load")]);;;; (define_insn "";; [(set (match_operand:HI 0 "mcore_arith_reg_operand" "=r");; (match_operand:BLK 1 "mcore_general_movsrc_operand" "m"))];; "";; "ld.h %0,%1";; [(set_attr "type" "load")]);;;; (define_insn "";; [(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r");; (match_operand:BLK 1 "mcore_general_movsrc_operand" "m"))];; "";; "ld.w %0,%1";; [(set_attr "type" "load")]);;;; (define_insn "";; [(set (match_operand:BLK 0 "mcore_general_movdst_operand" "=m");; (match_operand:QI 1 "mcore_arith_reg_operand" "r"))];; "";; "st.b %1,%0";; [(set_attr "type" "store")]);;;; (define_insn "";; [(set (match_operand:BLK 0 "mcore_general_movdst_operand" "=m");; (match_operand:HI 1 "mcore_arith_reg_operand" "r"))];; "";; "st.h %1,%0";; [(set_attr "type" "store")]);;;; (define_insn "";; [(set (match_operand:BLK 0 "mcore_general_movdst_operand" "=m");; (match_operand:SI 1 "mcore_arith_reg_operand" "r"))];; "";; "st.w %1,%0";; [(set_attr "type" "store")]);; ------------------------------------------------------------------------;; Misc Optimizing quirks;; ------------------------------------------------------------------------;; pair to catch constructs like: (int *)((p+=4)-4) which happen;; in stdarg/varargs traversal. This changes a 3 insn sequence to a 2;; insn sequence. -- RBE 11/30/95(define_insn ""[(parallel[(set (match_operand:SI 0 "mcore_arith_reg_operand" "=r")(match_operand:SI 1 "mcore_arith_reg_operand" "+r"))(set (match_dup 1) (plus:SI (match_dup 1) (match_operand 2 "mcore_arith_any_imm_operand" "")))])]"GET_CODE(operands[2]) == CONST_INT""#"[(set_attr "length" "4")])(define_split[(parallel[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operand:SI 1 "mcore_arith_reg_operand" ""))(set (match_dup 1) (plus:SI (match_dup 1) (match_operand 2 "mcore_arith_any_imm_operand" "")))])]"GET_CODE(operands[2]) == CONST_INT &&operands[0] != operands[1]"[(set (match_dup 0) (match_dup 1))(set (match_dup 1) (plus:SI (match_dup 1) (match_dup 2)))]);;; Peepholes; note: in the following patterns, use mcore_is_dead() to ensure that the; reg we may be trashing really is dead. reload doesn't always mark; deaths, so mcore_is_dead() (see mcore.c) scans forward to find its death. BRC;;; A peephole to convert the 3 instruction sequence generated by reload;;; to load a FP-offset address into a 2 instruction sequence.;;; ??? This probably never matches anymore.(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "const_int_operand" "J"))(set (match_dup 0) (neg:SI (match_dup 0)))(set (match_dup 0)(plus:SI (match_dup 0)(match_operand:SI 2 "mcore_arith_reg_operand" "r")))]"CONST_OK_FOR_J (INTVAL (operands[1]))""error\;mov %0,%2\;subi %0,%1");; Moves of inlinable constants are done late, so when a 'not' is generated;; it is never combined with the following 'and' to generate an 'andn' b/c;; the combiner never sees it. use a peephole to pick up this case (happens;; mostly with bitfields) BRC(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "r")(match_operand:SI 1 "const_int_operand" "i"))(set (match_operand:SI 2 "mcore_arith_reg_operand" "r")(and:SI (match_dup 2) (match_dup 0)))]"mcore_const_trick_uses_not (INTVAL (operands[1])) &&operands[0] != operands[2] &&mcore_is_dead (insn, operands[0])""* return mcore_output_andn (insn, operands);"); when setting or clearing just two bits, it's cheapest to use two bseti's; or bclri's. only happens when relaxing immediates. BRC(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operand:SI 1 "const_int_operand" ""))(set (match_operand:SI 2 "mcore_arith_reg_operand" "")(ior:SI (match_dup 2) (match_dup 0)))]"TARGET_HARDLIT&& mcore_num_ones (INTVAL (operands[1])) == 2&& mcore_is_dead (insn, operands[0])""* return mcore_output_bseti (operands[2], INTVAL (operands[1]));")(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operand:SI 1 "const_int_operand" ""))(set (match_operand:SI 2 "mcore_arith_reg_operand" "")(and:SI (match_dup 2) (match_dup 0)))]"TARGET_HARDLIT && mcore_num_zeros (INTVAL (operands[1])) == 2 &&mcore_is_dead (insn, operands[0])""* return mcore_output_bclri (operands[2], INTVAL (operands[1]));"); change an and with a mask that has a single cleared bit into a bclri. this; handles QI and HI mode values using the knowledge that the most significant; bits don't matter.(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operand:SI 1 "const_int_operand" ""))(set (match_operand:SI 2 "mcore_arith_reg_operand" "")(and:SI (match_operand:SI 3 "mcore_arith_reg_operand" "")(match_dup 0)))]"GET_CODE (operands[3]) == SUBREG &&GET_MODE (SUBREG_REG (operands[3])) == QImode &&mcore_num_zeros (INTVAL (operands[1]) | 0xffffff00) == 1 &&mcore_is_dead (insn, operands[0])""*if (! mcore_is_same_reg (operands[2], operands[3]))output_asm_insn (\"mov\\t%2,%3\", operands);return mcore_output_bclri (operands[2], INTVAL (operands[1]) | 0xffffff00);")/* Do not fold these together -- mode is lost at final output phase. */(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operand:SI 1 "const_int_operand" ""))(set (match_operand:SI 2 "mcore_arith_reg_operand" "")(and:SI (match_operand:SI 3 "mcore_arith_reg_operand" "")(match_dup 0)))]"GET_CODE (operands[3]) == SUBREG &&GET_MODE (SUBREG_REG (operands[3])) == HImode &&mcore_num_zeros (INTVAL (operands[1]) | 0xffff0000) == 1 &&operands[2] == operands[3] &&mcore_is_dead (insn, operands[0])""*if (! mcore_is_same_reg (operands[2], operands[3]))output_asm_insn (\"mov\\t%2,%3\", operands);return mcore_output_bclri (operands[2], INTVAL (operands[1]) | 0xffff0000);"); This peephole helps when using -mwide-bitfields to widen fields so they; collapse. This, however, has the effect that a narrower mode is not used; when desirable.;; e.g., sequences like:;; ldw r8,(r6); movi r7,0x00ffffff; and r8,r7 r7 dead; stw r8,(r6) r8 dead;; get peepholed to become:;; movi r8,0; stb r8,(r6) r8 dead;; Do only easy addresses that have no offset. This peephole is also applied; to halfwords. We need to check that the load is non-volatile before we get; rid of it.(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operand:SI 1 "memory_operand" ""))(set (match_operand:SI 2 "mcore_arith_reg_operand" "")(match_operand:SI 3 "const_int_operand" ""))(set (match_dup 0) (and:SI (match_dup 0) (match_dup 2)))(set (match_operand:SI 4 "memory_operand" "") (match_dup 0))]"mcore_is_dead (insn, operands[0]) &&! MEM_VOLATILE_P (operands[1]) &&mcore_is_dead (insn, operands[2]) &&(mcore_byte_offset (INTVAL (operands[3])) > -1 ||mcore_halfword_offset (INTVAL (operands[3])) > -1) &&! MEM_VOLATILE_P (operands[4]) &&GET_CODE (XEXP (operands[4], 0)) == REG""*{int ofs;enum machine_mode mode;rtx base_reg = XEXP (operands[4], 0);if ((ofs = mcore_byte_offset (INTVAL (operands[3]))) > -1)mode = QImode;else if ((ofs = mcore_halfword_offset (INTVAL (operands[3]))) > -1)mode = HImode;elsegcc_unreachable ();if (ofs > 0)operands[4] = gen_rtx_MEM (mode,gen_rtx_PLUS (SImode, base_reg, GEN_INT(ofs)));elseoperands[4] = gen_rtx_MEM (mode, base_reg);if (mode == QImode)return \"movi %0,0\\n\\tst.b %0,%4\";return \"movi %0,0\\n\\tst.h %0,%4\";}"); from sop11. get btsti's for (LT A 0) where A is a QI or HI value(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "r")(sign_extend:SI (match_operand:QI 1 "mcore_arith_reg_operand" "0")))(set (reg:CC 17)(lt:CC (match_dup 0)(const_int 0)))]"mcore_is_dead (insn, operands[0])""btsti %0,7")(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "r")(sign_extend:SI (match_operand:HI 1 "mcore_arith_reg_operand" "0")))(set (reg:CC 17)(lt:CC (match_dup 0)(const_int 0)))]"mcore_is_dead (insn, operands[0])""btsti %0,15"); Pick up a tst. This combination happens because the immediate is not; allowed to fold into one of the operands of the tst. Does not happen; when relaxing immediates. BRC(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(match_operand:SI 1 "mcore_arith_reg_operand" ""))(set (match_dup 0)(and:SI (match_dup 0)(match_operand:SI 2 "mcore_literal_K_operand" "")))(set (reg:CC 17) (ne:CC (match_dup 0) (const_int 0)))]"mcore_is_dead (insn, operands[0])""movi %0,%2\;tst %1,%0")(define_peephole[(set (match_operand:SI 0 "mcore_arith_reg_operand" "")(if_then_else:SI (ne (zero_extract:SI(match_operand:SI 1 "mcore_arith_reg_operand" "")(const_int 1)(match_operand:SI 2 "mcore_literal_K_operand" ""))(const_int 0))(match_operand:SI 3 "mcore_arith_imm_operand" "")(match_operand:SI 4 "mcore_arith_imm_operand" "")))(set (reg:CC 17) (ne:CC (match_dup 0) (const_int 0)))]"""*{unsigned int op0 = REGNO (operands[0]);if (GET_CODE (operands[3]) == REG){if (REGNO (operands[3]) == op0 && GET_CODE (operands[4]) == CONST_INT&& INTVAL (operands[4]) == 0)return \"btsti %1,%2\\n\\tclrf %0\";else if (GET_CODE (operands[4]) == REG){if (REGNO (operands[4]) == op0)return \"btsti %1,%2\\n\\tmovf %0,%3\";else if (REGNO (operands[3]) == op0)return \"btsti %1,%2\\n\\tmovt %0,%4\";}gcc_unreachable ();}else if (GET_CODE (operands[3]) == CONST_INT&& INTVAL (operands[3]) == 0&& GET_CODE (operands[4]) == REG)return \"btsti %1,%2\\n\\tclrt %0\";gcc_unreachable ();}"); experimental - do the constant folding ourselves. note that this isn't; re-applied like we'd really want. i.e., four ands collapse into two; instead of one. this is because peepholes are applied as a sliding; window. the peephole does not generate new rtl's, but instead slides; across the rtl's generating machine instructions. it would be nice; if the peephole optimizer is changed to re-apply patterns and to gen; new rtl's. this is more flexible. the pattern below helps when we're; not using relaxed immediates. BRC;(define_peephole; [(set (match_operand:SI 0 "mcore_arith_reg_operand" ""); (match_operand:SI 1 "const_int_operand" "")); (set (match_operand:SI 2 "mcore_arith_reg_operand" ""); (and:SI (match_dup 2) (match_dup 0))); (set (match_dup 0); (match_operand:SI 3 "const_int_operand" "")); (set (match_dup 2); (and:SI (match_dup 2) (match_dup 0)))]; "!TARGET_RELAX_IMM && mcore_is_dead (insn, operands[0]) &&; mcore_const_ok_for_inline (INTVAL (operands[1]) & INTVAL (operands[3]))"; "*;{; rtx out_operands[2];; out_operands[0] = operands[0];; out_operands[1] = GEN_INT (INTVAL (operands[1]) & INTVAL (operands[3]));;; output_inline_const (SImode, out_operands);;; output_asm_insn (\"and %2,%0\", operands);;; return \"\";;}"); BRC: for inlining get rid of extra test - experimental;(define_peephole; [(set (match_operand:SI 0 "mcore_arith_reg_operand" "r"); (ne:SI (reg:CC 17) (const_int 0))); (set (reg:CC 17) (ne:CC (match_dup 0) (const_int 0))); (set (pc); (if_then_else (eq (reg:CC 17) (const_int 0)); (label_ref (match_operand 1 "" "")); (pc)))]; ""; "*;{; if (get_attr_length (insn) == 10); {; output_asm_insn (\"bt 2f\\n\\tjmpi [1f]\", operands);; output_asm_insn (\".align 2\\n1:\", operands);; output_asm_insn (\".long %1\\n2:\", operands);; return \"\";; }; return \"bf %l1\";;}");;; Special patterns for dealing with the constant pool.;;; 4 byte integer in line.(define_insn "consttable_4"[(unspec_volatile [(match_operand:SI 0 "general_operand" "=g")] 0)]"""*{assemble_integer (operands[0], 4, BITS_PER_WORD, 1);return \"\";}"[(set_attr "length" "4")]);;; align to a four byte boundary.(define_insn "align_4"[(unspec_volatile [(const_int 0)] 1)]""".align 2");;; Handle extra constant pool entries created during final pass.(define_insn "consttable_end"[(unspec_volatile [(const_int 0)] 2)]"""* return mcore_output_jump_label_table ();");;;; Stack allocation -- in particular, for alloca().;; this is *not* what we use for entry into functions.;;;; This is how we allocate stack space. If we are allocating a;; constant amount of space and we know it is less than 4096;; bytes, we need do nothing.;;;; If it is more than 4096 bytes, we need to probe the stack;; periodically.;;;; operands[1], the distance is a POSITIVE number indicating that we;; are allocating stack space;;(define_expand "allocate_stack"[(set (reg:SI 0)(plus:SI (reg:SI 0)(match_operand:SI 1 "general_operand" "")))(set (match_operand:SI 0 "register_operand" "=r")(match_dup 2))]"""{/* If he wants no probing, just do it for him. */if (mcore_stack_increment == 0){emit_insn (gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx,operands[1]));;; emit_move_insn (operands[0], virtual_stack_dynamic_rtx);DONE;}/* For small constant growth, we unroll the code. */if (GET_CODE (operands[1]) == CONST_INT&& INTVAL (operands[1]) < 8 * STACK_UNITS_MAXSTEP){HOST_WIDE_INT left = INTVAL(operands[1]);/* If it's a long way, get close enough for a last shot. */if (left >= STACK_UNITS_MAXSTEP){rtx tmp = gen_reg_rtx (Pmode);emit_insn (gen_movsi (tmp, GEN_INT (STACK_UNITS_MAXSTEP)));do{rtx memref = gen_rtx_MEM (SImode, stack_pointer_rtx);MEM_VOLATILE_P (memref) = 1;emit_insn (gen_subsi3 (stack_pointer_rtx, stack_pointer_rtx, tmp));emit_insn (gen_movsi (memref, stack_pointer_rtx));left -= STACK_UNITS_MAXSTEP;}while (left > STACK_UNITS_MAXSTEP);}/* Perform the final adjustment. */emit_insn (gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, GEN_INT (-left)));;; emit_move_insn (operands[0], virtual_stack_dynamic_rtx);DONE;}else{rtx out_label = 0;rtx loop_label = gen_label_rtx ();rtx step = gen_reg_rtx (Pmode);rtx tmp = gen_reg_rtx (Pmode);rtx test, memref;#if 1emit_insn (gen_movsi (tmp, operands[1]));emit_insn (gen_movsi (step, GEN_INT (STACK_UNITS_MAXSTEP)));if (GET_CODE (operands[1]) != CONST_INT){out_label = gen_label_rtx ();test = gen_rtx_GEU (VOIDmode, step, tmp); /* quick out */emit_jump_insn (gen_cbranchsi4 (test, step, tmp, out_label));}/* Run a loop that steps it incrementally. */emit_label (loop_label);/* Extend a step, probe, and adjust remaining count. */emit_insn(gen_subsi3(stack_pointer_rtx, stack_pointer_rtx, step));memref = gen_rtx_MEM (SImode, stack_pointer_rtx);MEM_VOLATILE_P (memref) = 1;emit_insn(gen_movsi(memref, stack_pointer_rtx));emit_insn(gen_subsi3(tmp, tmp, step));/* Loop condition -- going back up. */test = gen_rtx_LTU (VOIDmode, step, tmp);emit_jump_insn (gen_cbranchsi4 (test, step, tmp, loop_label));if (out_label)emit_label (out_label);/* Bump the residual. */emit_insn (gen_subsi3 (stack_pointer_rtx, stack_pointer_rtx, tmp));;; emit_move_insn (operands[0], virtual_stack_dynamic_rtx);DONE;#else/* simple one-shot -- ensure register and do a subtract.* This does NOT comply with the ABI. */emit_insn (gen_movsi (tmp, operands[1]));emit_insn (gen_subsi3 (stack_pointer_rtx, stack_pointer_rtx, tmp));;; emit_move_insn (operands[0], virtual_stack_dynamic_rtx);DONE;#endif}}")
Go to most recent revision | Compare with Previous | Blame | View Log