URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [mep/] [mep.md] - Rev 709
Compare with Previous | Blame | View Log
;; Toshiba Media Processor Machine description template
;; Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2009 Free
;; Software Foundation, Inc.
;; Contributed by Red Hat Inc
;;
;; This file is part of GCC.
;;
;; GCC is free software; you can redistribute it and/or modify it
;; under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;;
;; GCC is distributed in the hope that it will be useful, but WITHOUT
;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
;; License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; <http://www.gnu.org/licenses/>. */
;; Constraints:
;;
;; a $sp
;; b $tp
;; c control regs
;; h $hi ($23)
;; l $lo ($24)
;; d $hi/$lo pair (DImode)
;; j $rpc ($22)
;; r $0..$15
;; t $0..$7
;; v $gp
;; x $c0..$c31
;; ex coprocessor registers that can be moved to other coprocessor registers
;; er coprocessor registers that can be moved to and from core registers
;; em coprocessor registers that can be moves to and from memory
;; y $ccr0..$ccr31
;; z $0
;;
;; I sign imm16 mov/add
;; J zero imm16 mov/add
;; K zero imm24 mov
;; L sign imm6 add
;; M zero imm5 slt,shifts
;; N zero imm4 bCC
;; O high imm16 mov
;;
;; R near symbol
;; S sign imm8 mov
;; T tp or gp relative symbol
;; U non-absolute memory
;; W %hi(sym)
;; Y (Rn)
;; Z Control Bus Symbol
;;
;; Modifiers:
;;
;; b print unique bit in mask
;; B print bits required for value (for clip)
;; h print decimal >> 16.
;; I print decimal, with hex comment if more than 8 bits
;; J print unsigned hex
;; L print set, clr or not (for bitops)
;; P print memory as a post-inc with no increment
;; U print bits required for value (for clipu)
;; x print unsigned decimal or hex, depending on where set bits are
(define_constants [
(REGSAVE_CONTROL_TEMP 11)
(FP_REGNO 8)
(TP_REGNO 13)
(GP_REGNO 14)
(SP_REGNO 15)
(PSW_REGNO 16)
(LP_REGNO 17)
(SAR_REGNO 18)
(RPB_REGNO 20)
(RPE_REGNO 21)
(RPC_REGNO 22)
(HI_REGNO 23)
(LO_REGNO 24)
(CBCR_REGNO 81)
])
(define_constants [
(UNS_BLOCKAGE 0)
(UNS_TPREL 2)
(UNS_GPREL 3)
(UNS_REPEAT_BEG 4)
(UNS_REPEAT_END 5)
(UNS_EH_EPILOGUE 6)
(UNS_EREPEAT_BEG 7)
(UNS_EREPEAT_END 8)
(UNS_BB_TRACE_RET 9)
(UNS_DISABLE_INT 10)
(UNS_ENABLE_INT 11)
(UNS_RETI 12)
])
;; This attribute determines the VLIW packing mechanism. The IVC2
;; coprocessor has two pipelines (P0 and P1), and a MeP+IVC2 can issue
;; up to three insns at a time. Most IVC2 insns can run on either
;; pipeline, however, scheduling some insns on P0 precludes packing a
;; core insn with it, and only 16-bit core insns can pack with any P0
;; insn.
(define_attr "vliw" "basic,ivc2"
(const (symbol_ref "TARGET_IVC2")))
;; This attribute describes the kind of memory operand present in the
;; instruction. This is used to compute the length of the insn based
;; on the addressing mode used.
(define_attr "memop" "none,core0,core1,cop0,cop1"
(const_string "none"))
(define_attr "intrinsic" "none,cmov,cmov1,cmov2,cmovc1,cmovc2,cmovh1,cmovh2"
(const_string "none"))
;; This attribute describes how the instruction may be bundled in a
;; VLIW instruction. Type MULTI is assumed to use both slots.
(define_attr "slot" "core,cop,multi"
(cond [(eq_attr "intrinsic" "!none")
(const_string "cop")]
(const_string "core")))
;; This attribute describes the latency of the opcode (ready delay).
;; The 0 is used to indicate "unspecified". An instruction that
;; completes immediately with no potential stalls would have a value
;; of 1, a one cycle stall would be 2, etc.
(define_attr "latency" ""
(const_int 0))
(define_attr "shiftop" "none,operand2"
(const_string "none"))
;; This attribute describes the size of the instruction in bytes.
;; This *must* be exact unless the pattern is SLOT_MULTI, as this
;; is used by the VLIW bundling code.
(define_attr "length" ""
(cond [(eq_attr "memop" "core0")
(symbol_ref "mep_core_address_length (insn, 0)")
(eq_attr "memop" "core1")
(symbol_ref "mep_core_address_length (insn, 1)")
(eq_attr "memop" "cop0")
(symbol_ref "mep_cop_address_length (insn, 0)")
(eq_attr "memop" "cop1")
(symbol_ref "mep_cop_address_length (insn, 1)")
]
; Catch patterns that don't define the length properly.
(symbol_ref "(abort (), 0)")))
;; This attribute describes a pipeline hazard seen in the insn.
(define_attr "stall" "none,int2,ssarb,load,store,ldc,stc,ldcb,stcb,ssrab,fsft,ret,advck,mul,mulr,div"
(cond [(and (eq_attr "shiftop" "operand2")
(not (match_operand:SI 2 "mep_single_shift_operand" "")))
(const_string "int2")]
(const_string "none")))
(define_attr "may_trap" "no,yes"
(const_string "no"))
;; Describe a user's asm statement.
(define_asm_attributes
[(set_attr "length" "4")
(set_attr "slot" "multi")])
;; Each IVC2 instruction uses one of these two pipelines. P0S insns
;; use P0; C3 insns use P1.
(define_automaton "mep_ivc2")
(define_cpu_unit "ivc2_core,ivc2_p0,ivc2_p1" "mep_ivc2")
;; Each core or IVC2 instruction is bundled into one of these slots.
;; Supported bundlings:
;;
;; Core mode:
;;
;; C1 [-----core-----]
;; C2 [-------------core-------------]
;; C3 [--------------c3--------------]
;;
;; VLIW mode:
;;
;; V1 [-----core-----][--------p0s-------][------------p1------------]
;; V2 [-------------core-------------]xxxx[------------p1------------]
;; V3 1111[--p0--]0111[--------p0--------][------------p1------------]
(define_attr "slots" "core,c3,p0,p0_p0s,p0_p1,p0s,p0s_p1,p1" (const_string "core"))
(define_cpu_unit "ivc2_slot_c16,ivc2_slot_c32,ivc2_slot_c3,ivc2_slot_p0s,ivc2_slot_p0,ivc2_slot_p1" "mep_ivc2")
(define_insn_reservation "ivc2_insn_core16" 1
(and (eq_attr "vliw" "ivc2")
(and (eq (symbol_ref "get_attr_length(insn)") (const_int 2))
(and (eq_attr "intrinsic" "none")
(eq_attr "slot" "!cop"))))
"ivc2_core+ivc2_slot_c16")
(define_insn_reservation "ivc2_insn_core32" 1
(and (eq_attr "vliw" "ivc2")
(and (eq (symbol_ref "get_attr_length(insn)") (const_int 4))
(and (eq_attr "intrinsic" "none")
(eq_attr "slot" "!cop"))))
"ivc2_core+ivc2_slot_c32")
;; These shouldn't happen when in VLIW mode.
(define_insn_reservation "ivc2_insn_c3" 1
(and (eq_attr "vliw" "ivc2")
(eq_attr "slots" "c3"))
"ivc2_p1+ivc2_slot_c3")
(define_insn_reservation "ivc2_insn_p0" 1
(and (eq_attr "vliw" "ivc2")
(eq_attr "slots" "p0"))
"ivc2_p0+ivc2_slot_p0")
(define_insn_reservation "ivc2_insn_p0_p0s" 1
(and (eq_attr "vliw" "ivc2")
(eq_attr "slots" "p0_p0s"))
"ivc2_p0+ivc2_slot_p0|ivc2_p0+ivc2_slot_p0s")
(define_insn_reservation "ivc2_insn_p0_p1" 1
(and (eq_attr "vliw" "ivc2")
(eq_attr "slots" "p0_p1"))
"ivc2_p0+ivc2_slot_p0|ivc2_p1+ivc2_slot_p1")
(define_insn_reservation "ivc2_insn_p0s" 1
(and (eq_attr "vliw" "ivc2")
(eq_attr "slots" "p0s"))
"ivc2_p0+ivc2_slot_p0s")
(define_insn_reservation "ivc2_insn_p0s_p1" 1
(and (eq_attr "vliw" "ivc2")
(eq_attr "slots" "p0s_p1"))
"ivc2_p0+ivc2_slot_p0s|ivc2_p1+ivc2_slot_p1")
(define_insn_reservation "ivc2_insn_p1" 1
(and (eq_attr "vliw" "ivc2")
(eq_attr "slots" "p1"))
"ivc2_p1+ivc2_slot_p1")
;; these run in C3 also, but when we're doing VLIW scheduling, they
;; only run in P0.
(define_insn_reservation "ivc2_insn_cmov" 1
(and (eq_attr "vliw" "ivc2")
(eq_attr "intrinsic" "!none"))
"ivc2_p0+ivc2_slot_p0")
(exclusion_set "ivc2_slot_c32"
"ivc2_slot_p0,ivc2_slot_p0s")
(exclusion_set "ivc2_slot_p0"
"ivc2_slot_p0s")
(exclusion_set "ivc2_slot_c16"
"ivc2_slot_p0")
(exclusion_set "ivc2_slot_c16"
"ivc2_slot_c32")
;; Non-IVC2 scheduling.
(define_automaton "mep")
(define_cpu_unit "core,cop" "mep")
;; Latencies are the time between one insn entering the second pipeline
;; stage (E2, LD, A2 or V2) and the next instruction entering the same
;; stage. When an instruction assigns to general registers, the default
;; latencies are for when the next instruction receives the register
;; through bypass 1.
;; Arithmetic instructions that execute in a single stage.
(define_insn_reservation "h1_int1" 2
(and (eq_attr "slot" "!cop")
(eq_attr "stall" "none"))
"core")
(define_bypass 1 "h1_int1" "h1_int1,h1_ssarb")
(define_bypass 1 "h1_int1" "h1_store" "mep_store_data_bypass_p")
;; $sar can be read by an immediately following fsft or ldc.
(define_insn_reservation "h1_ssarb" 1
(eq_attr "stall" "ssarb")
"core")
;; Arithmetic instructions that execute in two stages.
(define_insn_reservation "h1_int2" 2
(eq_attr "stall" "int2,fsft")
"core")
(define_bypass 1 "h1_int2" "h1_int1,h1_ssarb")
(define_bypass 1 "h1_int2" "h1_store" "mep_store_data_bypass_p")
(define_insn_reservation "h1_load" 4
(eq_attr "stall" "load")
"core")
(define_bypass 3 "h1_load" "h1_int1,h1_ssarb")
(define_bypass 3 "h1_load" "h1_store" "mep_store_data_bypass_p")
(define_insn_reservation "h1_store" 1
(eq_attr "stall" "store")
"core")
(define_insn_reservation "h1_ipipe_ldc" 2
(and (eq_attr "stall" "ldc")
(ne (symbol_ref "mep_ipipe_ldc_p(insn)") (const_int 0)))
"core")
(define_bypass 1 "h1_ipipe_ldc" "h1_int1,h1_ssarb")
(define_bypass 1 "h1_ipipe_ldc" "h1_store" "mep_store_data_bypass_p")
(define_insn_reservation "h1_apipe_ldc" 2
(and (eq_attr "stall" "ldc")
(eq (symbol_ref "mep_ipipe_ldc_p(insn)") (const_int 0)))
"core")
;; 2 is correct for stc->ret and stc->fsft. The most important remaining
;; case is stc->madd, which induces no stall.
(define_insn_reservation "h1_stc" 2
(eq_attr "stall" "stc")
"core")
(define_bypass 1 "h1_stc" "h1_mul")
;; ??? Parameterised latency.
(define_insn_reservation "h1_ldcb" 5
(eq_attr "stall" "ldcb")
"core")
(define_insn_reservation "h1_stcb" 1
(eq_attr "stall" "stcb")
"core")
(define_insn_reservation "h1_advck" 6
(eq_attr "stall" "advck")
"core")
(define_insn_reservation "h1_mul" 5
(eq_attr "stall" "mul,mulr")
"core")
(define_bypass 4 "h1_mul" "h1_int1,h1_ssarb")
(define_bypass 4 "h1_mul" "h1_store" "mep_store_data_bypass_p")
(define_bypass 1 "h1_mul" "h1_mul" "mep_mul_hilo_bypass_p")
(define_insn_reservation "h1_div" 36
(eq_attr "stall" "div")
"core")
(define_insn_reservation "h1_cop" 1
(eq_attr "slot" "cop")
"cop")
(include "predicates.md")
(include "constraints.md")
(include "intrinsics.md")
;; ::::::::::::::::::::
;; ::
;; :: Moves
;; ::
;; ::::::::::::::::::::
(define_expand "movqi"
[(set (match_operand:QI 0 "general_operand" "")
(match_operand:QI 1 "general_operand" ""))]
""
"
{
if (mep_expand_mov (operands, QImode))
DONE;
}")
;; The Idea here is to prefer the 16-bit tp-relative load, but to fall back
;; to the general 32-bit load rather than do silly things with spill regs.
(define_insn "*movqi_tprel_load"
[(set (match_operand:QI 0 "mep_tprel_operand" "=t,*r")
(mem:QI (plus:SI (match_operand:SI 1 "mep_tp_operand" "b,*r")
(const:SI (unspec:SI [(match_operand:SI 2
"symbolic_operand" "s,s")]
UNS_TPREL)))))]
""
"lb\\t%0, %%tpoff(%2)(%1)"
[(set_attr "length" "2,4")
(set_attr "stall" "load")])
(define_insn "*movqi_tprel_store"
[(set (mem:QI (plus:SI (match_operand:SI 0 "mep_tp_operand" "b,*r")
(const:SI (unspec:SI [(match_operand:SI 1
"symbolic_operand" "s,s")]
UNS_TPREL))))
(match_operand:QI 2 "mep_tprel_operand" "t,*r"))]
""
"sb\\t%2, %%tpoff(%1)(%0)"
[(set_attr "length" "2,4")
(set_attr "stall" "store")])
(define_insn "*movqi_internal"
[(set (match_operand:QI 0 "nonimmediate_operand" "=r,r, r,m,r,c,r,y,r,er,ex,em,Y")
(match_operand:QI 1 "general_operand" " r,n,rm,r,c,r,y,r,er,r,ex,Y,em"))]
"mep_mov_ok (operands, QImode)"
"@
mov\\t%0, %1
mov\\t%0, %1
lb\\t%0, %1
sb\\t%1, %0
ldc\\t%0, %1
stc\\t%1, %0
cmovc\\t%0, %1
cmovc\\t%0, %1
cmov\\t%0, %1
cmov\\t%0, %1
%<\\t%0, %M1
lbcpa\\t%0, %P1
sbcpa\\t%1, %P0"
[(set_attr "length" "2,2,*,*,2,2,4,4,4,4,*,4,4")
(set_attr "intrinsic" "*,*,*,*,*,*,cmovc2,cmovc1,cmov2,cmov1,cmov,*,*")
(set_attr "stall" "*,*,load,store,ldc,stc,*,*,*,*,*,load,store")
(set_attr "memop" "*,*,core1,core0,*,*,*,*,*,*,*,*,*")])
(define_expand "movhi"
[(set (match_operand:HI 0 "general_operand" "")
(match_operand:HI 1 "general_operand" ""))]
""
"
{
if (mep_expand_mov (operands, HImode))
DONE;
}")
(define_insn "*movhi_tprel_load"
[(set (match_operand:HI 0 "mep_tprel_operand" "=t,*r")
(mem:HI (plus:SI (match_operand:SI 1 "mep_tp_operand" "b,*r")
(const:SI (unspec:SI [(match_operand:SI 2
"symbolic_operand" "s,s")]
UNS_TPREL)))))]
""
"lh\\t%0, %%tpoff(%2)(%1)"
[(set_attr "length" "2,4")
(set_attr "stall" "load")])
(define_insn "*movhi_tprel_store"
[(set (mem:HI (plus:SI (match_operand:SI 0 "mep_tp_operand" "b,*r")
(const:SI (unspec:SI [(match_operand:SI 1
"symbolic_operand" "s,s")]
UNS_TPREL))))
(match_operand:HI 2 "mep_tprel_operand" "t,*r"))]
""
"sh\\t%2, %%tpoff(%1)(%0)"
[(set_attr "length" "2,4")
(set_attr "stall" "store")])
(define_insn "*movhi_internal"
[(set (match_operand:HI 0 "nonimmediate_operand" "=r,r,r,r,m,r,c,r,y,r,er,ex,em,Y")
(match_operand:HI 1 "general_operand" " r,S,n,m,r,c,r,y,r,er,r,ex,Y,em"))]
"mep_mov_ok (operands, HImode)"
"@
mov\\t%0, %1
mov\\t%0, %I1
mov\\t%0, %I1
lh\\t%0, %1
sh\\t%1, %0
ldc\\t%0, %1
stc\\t%1, %0
cmovc\\t%0, %1
cmovc\\t%0, %1
cmov\\t%0, %1
cmov\\t%0, %1
%<\\t%0, %M1
lhcpa\\t%0, %P1
shcpa\\t%1, %P0"
[(set_attr "length" "2,2,4,*,*,2,2,4,4,4,4,*,4,4")
(set_attr "intrinsic" "*,*,*,*,*,*,*,cmovc2,cmovc1,cmov2,cmov1,cmov,*,*")
(set_attr "stall" "*,*,*,load,store,ldc,stc,*,*,*,*,*,load,store")
(set_attr "memop" "*,*,*,core1,core0,*,*,*,*,*,*,*,*,*")])
(define_expand "movsi"
[(set (match_operand:SI 0 "nonimmediate_operand" "")
(match_operand:SI 1 "general_operand" ""))]
""
"
{
if (mep_expand_mov (operands, SImode))
DONE;
}")
(define_insn "*movsi_tprel_load"
[(set (match_operand:SI 0 "mep_tprel_operand" "=t,*r")
(mem:SI (plus:SI (match_operand:SI 1 "mep_tp_operand" "b,*r")
(const:SI (unspec:SI [(match_operand:SI 2
"symbolic_operand" "s,s")]
UNS_TPREL)))))]
""
"lw\\t%0, %%tpoff(%2)(%1)"
[(set_attr "length" "2,4")
(set_attr "stall" "load")])
(define_insn "*movsi_tprel_store"
[(set (mem:SI (plus:SI (match_operand:SI 0 "mep_tp_operand" "b,*r")
(const:SI (unspec:SI [(match_operand:SI 1
"symbolic_operand" "s,s")]
UNS_TPREL))))
(match_operand:SI 2 "mep_tprel_operand" "t,*r"))]
""
"sw\\t%2, %%tpoff(%1)(%0)"
[(set_attr "length" "2,4")
(set_attr "stall" "store")])
(define_insn "movsi_topsym_s"
[(set (match_operand:SI 0 "register_operand" "=r")
(high:SI (match_operand:SI 1 "symbolic_operand" "s")))]
""
"movh\\t%0, %%hi(%1)"
[(set_attr "length" "4")])
(define_insn "movsi_botsym_s"
[(set (match_operand:SI 0 "register_operand" "=r")
(lo_sum:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "symbolic_operand" "s")))]
""
"add3\\t%0, %1, %%lo(%2)"
[(set_attr "length" "4")])
(define_insn "cmovh_getsub"
[(set (match_operand:SI 0 "register_operand" "=r")
(subreg:SI (match_operand:DI 1 "register_operand" "er") 4))]
"0 && TARGET_64BIT_CR_REGS"
"cmovh\\t%0, %1"
[(set_attr "intrinsic" "cmovh2")
(set_attr "length" "4")])
(define_insn "*movsi_internal"
[(set (match_operand:SI 0 "mep_movdest_operand"
"=r,r,r,r,r, t,t,r,r,r,Z,m,r,c,r,y,r, er,ex,em,U ")
(match_operand:SI 1 "general_operand"
" r,S,I,J,OW,K,s,i,Z,m,r,r,c,r,y,r,er,r, ex,U, em"))]
"mep_mov_ok (operands, SImode)"
"@
mov\\t%0, %1
mov\\t%0, %I1
mov\\t%0, %I1
movu\\t%0, %J1
movh\\t%0, %h1
movu\\t%0, %x1
movu\\t%0, %1
#
ldcb\\t%0, %1
lw\\t%0, %1
stcb\\t%1, %0
sw\\t%1, %0
ldc\\t%0, %1
stc\\t%1, %0
cmovc\\t%0, %1
cmovc\\t%0, %1
cmov\\t%0, %1
cmov\\t%0, %1
%<\\t%0, %M1
lwcp\\t%0, %1
swcp\\t%1, %0"
[(set_attr "length" "2,2,4,4,4,4,4,*,4,*,4,*,2,2,4,4,4,4,4,*,*")
(set_attr "intrinsic" "*,*,*,*,*,*,*,*,*,*,*,*,*,*,cmovc2,cmovc1,cmov2,cmov1,cmov,*,*")
(set_attr "stall" "*,*,*,*,*,*,*,*,ldcb,load,stcb,store,ldc,stc,*,*,*,*,*,load,store")
(set_attr "memop" "*,*,*,*,*,*,*,*,*,core1,*,core0,*,*,*,*,*,*,*,cop1,cop0")
(set_attr "slot" "*,*,*,*,*,*,*,multi,*,*,*,*,*,*,*,*,*,*,*,*,*")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(match_operand:SI 1 "const_int_operand" ""))]
"mep_split_mov (operands, 0)"
[(set (match_dup 0) (match_dup 2))
(set (match_dup 0) (ior:SI (match_dup 0) (match_dup 3)))]
"
{
HOST_WIDE_INT value;
int lo, hi;
value = INTVAL (operands[1]);
lo = value & 0xffff;
hi = trunc_int_for_mode (value & 0xffff0000, SImode);
operands[2] = GEN_INT (hi);
operands[3] = GEN_INT (lo);
}")
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(match_operand:SI 1 "immediate_operand" ""))]
"mep_split_mov (operands, 1)"
[(set (match_dup 0) (high:SI (match_dup 1)))
(set (match_dup 0) (lo_sum:SI (match_dup 0) (match_dup 1)))]
"")
;; ??? What purpose do these two serve that high+lo_sum do not?
(define_insn "movsi_topsym_u"
[(set (match_operand:SI 0 "register_operand" "=r")
(and:SI (match_operand:SI 1 "symbolic_operand" "s")
(const_int -65536)))]
""
"movh\\t%0, %%uhi(%1)"
[(set_attr "length" "4")])
(define_insn "movsi_botsym_u"
[(set (match_operand:SI 0 "register_operand" "=r")
(ior:SI (match_operand:SI 1 "register_operand" "0")
(and:SI (match_operand:SI 2 "symbolic_operand" "s")
(const_int 65535))))]
""
"or3\\t%0, %1, %%lo(%2)"
[(set_attr "length" "4")])
(define_expand "movdi"
[(set (match_operand:DI 0 "" "")
(match_operand:DI 1 "" ""))]
""
"
{
if (mep_expand_mov (operands, DImode))
DONE;
}")
(define_insn "*movdi_internal_32"
[(set (match_operand:DI 0 "mep_movdest_operand" "= r,m,r,c,r,er,ex,em,U")
(match_operand:DI 1 "general_operand" "rim,r,c,r,er,r,ex,U,em"))]
"TARGET_32BIT_CR_REGS && mep_mov_ok (operands, DImode)"
"#"
[(set_attr "slot" "multi")])
(define_insn "*movdi_internal_64"
[(set (match_operand:DI 0 "mep_movdest_operand" "=r,r,m,r,c,r,er,ex,em,U")
(match_operand:DI 1 "general_operand" "r,im,r,c,r,er,r,ex,U,em"))]
"TARGET_64BIT_CR_REGS && mep_mov_ok (operands, DImode)"
"@
#
#
#
#
#
#
#
%<\\t%0, %M1
lmcp\\t%0, %1
smcp\\t%1, %0"
[(set_attr "slot" "multi,multi,multi,multi,multi,multi,multi,*,*,*")
(set_attr "intrinsic" "*,*,*,*,*,*,*,cmov,*,*")
(set_attr "memop" "*,*,*,*,*,*,*,cop0,cop1,cop0")
(set_attr "stall" "*,*,*,*,*,*,*,*,load,store")])
(define_insn "*movdi_cop_postinc"
[(parallel [(set (match_operand:DI 0 "register_operand" "=em")
(mem:DI (reg:SI SP_REGNO)))
(set (reg:SI SP_REGNO)
(plus:SI (reg:SI SP_REGNO)
(const_int 8)))
]
)]
"TARGET_COP"
"lmcpi\\t%0,($sp+)"
[(set_attr "length" "2")])
(define_insn "*movdi_cop_postinc"
[(parallel [(set (match_operand:DI 0 "register_operand" "=em")
(mem:DI (match_operand:SI 2 "register_operand" "r")))
(set (match_operand:SI 1 "register_operand" "=0")
(plus:SI (match_operand:SI 3 "register_operand" "0")
(const_int 8)))
]
)]
"TARGET_COP"
"lmcpi\\t%0,(%1+)"
[(set_attr "length" "2")])
(define_insn "*cmovh_set"
[(set (zero_extract:SI (match_operand:DI 0 "register_operand" "+er")
(const_int 32)
(const_int 32))
(match_operand:SI 1 "register_operand" "r"))]
"TARGET_64BIT_CR_REGS"
"cmovh\\t%0, %1"
[(set_attr "intrinsic" "cmovh1")
(set_attr "length" "4")])
(define_insn "cmovh_get"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extract:SI (match_operand:DI 1 "register_operand" "er")
(const_int 32)
(const_int 32)))]
"TARGET_64BIT_CR_REGS"
"cmovh\\t%0, %1"
[(set_attr "intrinsic" "cmovh2")
(set_attr "length" "4")])
(define_split
[(set (match_operand:DI 0 "mep_movdest_operand" "")
(match_operand:DI 1 "general_operand" ""))]
"reload_completed && mep_multi_slot (insn)"
[(set (match_dup 2) (match_dup 3))
(set (match_dup 4) (match_dup 5))]
"mep_split_wide_move (operands, DImode);")
;; Floating Point Moves
(define_expand "movsf"
[(set (match_operand:SF 0 "nonimmediate_operand" "")
(match_operand:SF 1 "general_operand" ""))]
""
"
{
if (mep_expand_mov (operands, SFmode))
DONE;
}")
(define_insn "*movsf_tprel_load"
[(set (match_operand:SF 0 "mep_tprel_operand" "=t,*r")
(mem:SF (plus:SI (match_operand:SI 1 "mep_tp_operand" "b,*r")
(const:SI (unspec:SI [(match_operand:SI 2
"symbolic_operand" "s,s")]
UNS_TPREL)))))]
""
"lw\\t%0, %%tpoff(%2)(%1)"
[(set_attr "length" "2,4")
(set_attr "stall" "load")])
(define_insn "*movsf_tprel_store"
[(set (mem:SF (plus:SI (match_operand:SI 0 "mep_tp_operand" "b,*r")
(const:SI (unspec:SI [(match_operand:SI 1
"symbolic_operand" "s,s")]
UNS_TPREL))))
(match_operand:SF 2 "mep_tprel_operand" "t,*r"))]
""
"sw\\t%2, %%tpoff(%1)(%0)"
[(set_attr "length" "2,4")
(set_attr "stall" "store")])
(define_insn "*movsf_internal"
[(set (match_operand:SF 0 "mep_movdest_operand"
"=r,r,r,r,Z,m,r,c,r,y,r,er,ex,em,U")
(match_operand:SF 1 "general_operand"
" r,F,Z,m,r,r,c,r,y,r,er,r,ex,U,em"))]
"mep_mov_ok (operands, SFmode)"
"@
mov\\t%0, %1
#
ldcb\\t%0, %1
lw\\t%0, %1
stcb\\t%1, %0
sw\\t%1, %0
ldc\\t%0, %1
stc\\t%1, %0
cmovc\\t%0, %1
cmovc\\t%0, %1
cmov\\t%0, %1
cmov\\t%0, %1
%<\\t%0, %M1
lwcp\\t%0, %1
swcp\\t%1, %0"
[(set_attr "length" "2,*,2,*,2,*,2,2,*,*,4,4,*,*,*")
(set_attr "intrinsic" "*,*,*,*,*,*,*,*,cmovc2,cmovc1,cmov2,cmov1,cmov,*,*")
(set_attr "stall" "*,*,ldcb,load,stcb,store,ldc,stc,*,*,*,*,*,load,store")
(set_attr "memop" "*,*,*,core1,*,core0,*,*,*,*,*,*,*,cop1,cop0")])
(define_split
[(set (match_operand:SF 0 "register_operand" "")
(match_operand:SF 1 "const_double_operand" ""))]
"reload_completed"
[(const_int 0)]
"
{
REAL_VALUE_TYPE rv;
HOST_WIDE_INT value;
HOST_WIDE_INT lo, hi;
rtx out;
REAL_VALUE_FROM_CONST_DOUBLE (rv, operands[1]);
REAL_VALUE_TO_TARGET_SINGLE (rv, value);
lo = value & 0xffff;
hi = trunc_int_for_mode (value & 0xffff0000, SImode);
out = gen_rtx_REG (SImode, REGNO (operands[0]));
emit_move_insn (out, GEN_INT (hi));
if (lo != 0)
emit_insn (gen_iorsi3 (out, out, GEN_INT (lo)));
DONE;
}")
(define_expand "movdf"
[(set (match_operand:DF 0 "" "")
(match_operand:DF 1 "" ""))]
""
"
{
if (mep_expand_mov (operands, DFmode))
DONE;
}")
(define_insn "*movdf_internal_32"
[(set (match_operand:DF 0 "mep_movdest_operand" "= r,m,r,c,r,er,ex,em,U")
(match_operand:DF 1 "general_operand" "rFm,r,c,r,er,r,ex,U,em"))]
"TARGET_32BIT_CR_REGS && mep_mov_ok (operands, DFmode)"
"#"
[(set_attr "slot" "multi")])
(define_insn "*movdf_internal_64"
[(set (match_operand:DF 0 "mep_movdest_operand" "= r,m,r,c,r,er,ex,em,U")
(match_operand:DF 1 "general_operand" "rFm,r,c,r,er,r,ex,U,em"))]
"TARGET_64BIT_CR_REGS && mep_mov_ok (operands, DFmode)"
"@
#
#
#
#
#
#
%<\\t%0, %M1
lmcp\\t%0, %1
smcp\\t%1, %0"
[(set_attr "slot" "multi,multi,multi,multi,multi,multi,*,*,*")
(set_attr "intrinsic" "*,*,*,*,*,*,cmov,*,*")
(set_attr "memop" "*,*,*,*,*,*,*,cop1,cop0")
(set_attr "stall" "*,*,*,*,*,*,*,load,store")])
(define_split
[(set (match_operand:DF 0 "mep_movdest_operand" "")
(match_operand:DF 1 "general_operand" ""))]
"reload_completed && mep_multi_slot (insn)"
[(set (match_dup 2) (match_dup 3))
(set (match_dup 4) (match_dup 5))]
"mep_split_wide_move (operands, DFmode);")
(define_insn "*lbcpa"
[(set (match_operand:SI 0 "register_operand" "=em")
(sign_extend:SI (mem:QI (match_operand:SI 2 "register_operand" "1"))))
(set (match_operand:SI 1 "register_operand" "=r")
(plus:SI (match_dup 2)
(match_operand:SI 3 "cgen_h_sint_8a1_immediate" "")))]
"TARGET_COP && reload_completed"
"lbcpa\t%0, (%1+), %3"
[(set_attr "length" "4")
(set_attr "stall" "load")])
(define_insn "*sbcpa"
[(set (mem:QI (match_operand:SI 1 "register_operand" "0"))
(match_operand:QI 2 "register_operand" "em"))
(set (match_operand:SI 0 "register_operand" "=r")
(plus:SI (match_dup 1)
(match_operand:SI 3 "cgen_h_sint_8a1_immediate" "")))]
"TARGET_COP && reload_completed"
"sbcpa\t%2, (%0+), %3"
[(set_attr "length" "4")
(set_attr "stall" "store")])
(define_insn "*lhcpa"
[(set (match_operand:SI 0 "register_operand" "=em")
(sign_extend:SI (mem:HI (match_operand:SI 2 "register_operand" "1"))))
(set (match_operand:SI 1 "register_operand" "=r")
(plus:SI (match_dup 2)
(match_operand:SI 3 "cgen_h_sint_7a2_immediate" "")))]
"TARGET_COP && reload_completed"
"lhcpa\t%0, (%1+), %3"
[(set_attr "length" "4")
(set_attr "stall" "load")])
(define_insn "*shcpa"
[(set (mem:HI (match_operand:SI 1 "register_operand" "0"))
(match_operand:HI 2 "register_operand" "em"))
(set (match_operand:SI 0 "register_operand" "=r")
(plus:SI (match_dup 1)
(match_operand:SI 3 "cgen_h_sint_7a2_immediate" "")))]
"TARGET_COP && reload_completed"
"shcpa\t%2, (%0+), %3"
[(set_attr "length" "4")
(set_attr "stall" "store")])
(define_insn "*lwcpi"
[(set (match_operand:SI 0 "register_operand" "=em")
(mem:SI (match_operand:SI 2 "register_operand" "1")))
(set (match_operand:SI 1 "register_operand" "=r")
(plus:SI (match_dup 2)
(const_int 4)))]
"TARGET_COP && reload_completed"
"lwcpi\t%0, (%1+)"
[(set_attr "length" "2")
(set_attr "stall" "load")])
(define_insn "*lwcpa"
[(set (match_operand:SI 0 "register_operand" "=em")
(mem:SI (match_operand:SI 2 "register_operand" "1")))
(set (match_operand:SI 1 "register_operand" "=r")
(plus:SI (match_dup 2)
(match_operand:SI 3 "cgen_h_sint_6a4_immediate" "")))]
"TARGET_COP && reload_completed"
"lwcpa\t%0, (%1+), %3"
[(set_attr "length" "4")
(set_attr "stall" "load")])
(define_insn "*swcpi"
[(set (mem:SI (match_operand:SI 1 "register_operand" "0"))
(match_operand:SI 2 "register_operand" "em"))
(set (match_operand:SI 0 "register_operand" "=r")
(plus:SI (match_dup 1)
(const_int 4)))]
"TARGET_COP && reload_completed"
"swcpi\t%2, (%0+)"
[(set_attr "length" "2")
(set_attr "stall" "store")])
(define_insn "*swcpa"
[(set (mem:SI (match_operand:SI 1 "register_operand" "0"))
(match_operand:SI 2 "register_operand" "em"))
(set (match_operand:SI 0 "register_operand" "=r")
(plus:SI (match_dup 1)
(match_operand:SI 3 "cgen_h_sint_6a4_immediate" "")))]
"TARGET_COP && reload_completed"
"swcpa\t%2, (%0+), %3"
[(set_attr "length" "4")
(set_attr "stall" "store")])
(define_peephole2
[(set (match_operand:SI 0 "register_operand" "")
(plus:SI (match_dup 0)
(match_operand:SI 1 "cgen_h_sint_8a1_immediate" "")))]
"TARGET_COP && mep_use_post_modify_p (insn, operands[0], operands[1])"
[(const_int 0)]
{
emit_note (NOTE_INSN_DELETED);
DONE;
})
;; ::::::::::::::::::::
;; ::
;; :: Reloads
;; ::
;; ::::::::::::::::::::
(define_expand "reload_insi"
[(set (match_operand:SI 0 "mep_reload_operand" "")
(match_operand:SI 1 "mep_reload_operand" "r"))
(clobber (match_operand:SI 2 "register_operand" "=&r"))]
""
"
{
mep_expand_reload (operands, SImode);
DONE;
}")
(define_expand "reload_outsi"
[(set (match_operand:SI 0 "mep_reload_operand" "=r")
(match_operand:SI 1 "mep_reload_operand" ""))
(clobber (match_operand:SI 2 "register_operand" "=&r"))]
""
"
{
mep_expand_reload (operands, SImode);
DONE;
}")
;; ::::::::::::::::::::
;; ::
;; :: Conversions
;; ::
;; ::::::::::::::::::::
(define_insn "extendqisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r,em")
(sign_extend:SI
(match_operand:QI 1 "nonimmediate_operand" "0,m,Y")))]
""
"@
extb\\t%0
lb\\t%0, %1
lbcpa\\t%0, %P1"
[(set_attr "length" "2,*,*")
(set_attr "stall" "*,load,load")
(set_attr "memop" "*,core1,cop1")])
(define_insn "extendhisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r,em")
(sign_extend:SI
(match_operand:HI 1 "nonimmediate_operand" "0,m,Y")))]
""
"@
exth\\t%0
lh\\t%0, %1
lhcpa\\t%0, %P1"
[(set_attr "length" "2,*,*")
(set_attr "stall" "*,load,load")
(set_attr "memop" "*,core1,cop1")])
(define_insn "zero_extendqisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(zero_extend:SI
(match_operand:QI 1 "nonimmediate_operand" "0,r,m")))]
""
"@
extub\\t%0
and3\\t%0, %1, 255
lbu\\t%0, %1"
[(set_attr "length" "2,4,*")
(set_attr "stall" "*,*,load")
(set_attr "memop" "*,*,core1")])
(define_insn "zero_extendhisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(zero_extend:SI
(match_operand:HI 1 "nonimmediate_operand" "0,r,m")))]
""
"@
extuh\\t%0
and3\\t%0, %1, 65535
lhu\\t%0, %1"
[(set_attr "length" "2,4,*")
(set_attr "stall" "*,*,load")
(set_attr "memop" "*,*,core1")])
;; ::::::::::::::::::::
;; ::
;; :: 32 bit Integer arithmetic
;; ::
;; ::::::::::::::::::::
(define_insn "addsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(plus:SI (match_operand:SI 1 "register_operand" "%r,0,r")
(match_operand:SI 2 "mep_add_operand" "r,L,IT")))]
""
"@
add3\\t%0, %1, %2
add\\t%0, %2
add3\\t%0, %1, %I2"
[(set (attr "length")
(if_then_else (eq_attr "alternative" "2")
(if_then_else (and (match_operand:SI 1 "mep_sp_operand" "")
(match_operand:SI 2 "mep_imm7a4_operand" ""))
(const_int 2)
(const_int 4))
(const_int 2)))])
;; The intention here is to combine the 16-bit add with the 16-bit
;; move to create a 32-bit add. It's the same size, but takes one
;; less machine cycle. It will happen to match a 32-bit add with a
;; 16-bit move also, but gcc shouldn't be doing that ;)
(define_peephole2
[(set (match_operand:SI 0 "register_operand" "")
(plus:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "immediate_operand" "")))
(set (match_operand:SI 3 "register_operand" "")
(match_operand:SI 4 "register_operand" ""))]
"REGNO (operands[0]) == REGNO (operands[1])
&& REGNO (operands[0]) == REGNO (operands[4])
&& GR_REGNO_P (REGNO (operands[3]))
&& dead_or_set_p (peep2_next_insn (1), operands[4])"
[(set (match_dup 3)
(plus:SI (match_dup 1)
(match_dup 2)))]
"")
(define_insn "subsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(minus:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))]
""
"sub\\t%0, %2"
[(set_attr "length" "2")])
(define_expand "mulsi3"
[(set (match_operand:SI 0 "register_operand" "")
(mult:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" "")))]
"TARGET_OPT_MULT || TARGET_COPRO_MULT"
{
emit_insn (gen_mulsi3_1 (operands[0], operands[1], operands[2]));
DONE;
})
;; Generated by mep_reuse_lo_p when no GPR destination is needed.
(define_insn "mulsi3_lo"
[(set (match_operand:SI 0 "mep_lo_operand" "=l")
(mult:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "register_operand" "r")))
(clobber (match_scratch:SI 3 "=h"))]
"TARGET_OPT_MULT && reload_completed"
"mul\\t%1, %2"
[(set_attr "length" "2")
(set_attr "stall" "mul")])
;; Generated by mep_reuse_lo_p when both destinations of a mulr
;; are needed.
(define_insn "mulsi3r"
[(set (match_operand:SI 0 "mep_lo_operand" "=l")
(mult:SI (match_operand:SI 2 "register_operand" "1")
(match_operand:SI 3 "register_operand" "r")))
(set (match_operand:SI 1 "register_operand" "=r")
(mult:SI (match_dup 2)
(match_dup 3)))
(clobber (match_scratch:SI 4 "=h"))]
"TARGET_OPT_MULT && reload_completed"
"mulr\\t%2, %3"
[(set_attr "length" "2")
(set_attr "stall" "mulr")])
(define_insn "mulsi3_1"
[(set (match_operand:SI 0 "register_operand" "=r")
(mult:SI (match_operand:SI 1 "register_operand" "%0")
(match_operand:SI 2 "register_operand" "r")))
(clobber (match_scratch:SI 3 "=l"))
(clobber (match_scratch:SI 4 "=h"))]
"TARGET_OPT_MULT"
"mulr\\t%1, %2"
[(set_attr "length" "2")
(set_attr "stall" "mulr")])
(define_expand "mulsidi3"
[(set (match_operand:DI 0 "register_operand" "")
(mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" ""))
(sign_extend:DI (match_operand:SI 2 "register_operand" ""))))]
"TARGET_OPT_MULT"
"
{
rtx hi = gen_reg_rtx (SImode);
rtx lo = gen_reg_rtx (SImode);
emit_insn (gen_mulsidi3_i (hi, lo, operands[1], operands[2]));
emit_move_insn (gen_lowpart (SImode, operands[0]), lo);
emit_move_insn (gen_highpart (SImode, operands[0]), hi);
DONE;
}")
(define_insn "mulsidi3_i"
[(set (match_operand:SI 0 "mep_hi_operand" "=h")
(truncate:SI
(lshiftrt:DI
(mult:DI (sign_extend:DI
(match_operand:SI 2 "register_operand" "r"))
(sign_extend:DI
(match_operand:SI 3 "register_operand" "r")))
(const_int 32))))
(set (match_operand:SI 1 "mep_lo_operand" "=l")
(mult:SI (match_dup 2)
(match_dup 3)))]
"TARGET_OPT_MULT"
"mul\\t%2, %3"
[(set_attr "length" "2")
(set_attr "stall" "mul")])
(define_insn "smulsi3_highpart"
[(set (match_operand:SI 0 "mep_hi_operand" "=h")
(truncate:SI
(lshiftrt:DI
(mult:DI (sign_extend:DI
(match_operand:SI 1 "register_operand" "r"))
(sign_extend:DI
(match_operand:SI 2 "register_operand" "r")))
(const_int 32))))
(clobber (reg:SI LO_REGNO))]
"TARGET_OPT_MULT"
"mul\\t%1, %2"
[(set_attr "length" "2")
(set_attr "stall" "mul")])
(define_expand "umulsidi3"
[(set (match_operand:DI 0 "mep_hi_operand" "")
(mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" ""))
(zero_extend:DI (match_operand:SI 2 "register_operand" ""))))]
"TARGET_OPT_MULT"
"
{
rtx hi = gen_reg_rtx (SImode);
rtx lo = gen_reg_rtx (SImode);
emit_insn (gen_umulsidi3_i (hi, lo, operands[1], operands[2]));
emit_move_insn (gen_lowpart (SImode, operands[0]), lo);
emit_move_insn (gen_highpart (SImode, operands[0]), hi);
DONE;
}")
(define_insn "umulsidi3_i"
[(set (match_operand:SI 0 "mep_hi_operand" "=h")
(truncate:SI
(lshiftrt:DI
(mult:DI (zero_extend:DI
(match_operand:SI 2 "register_operand" "r"))
(zero_extend:DI
(match_operand:SI 3 "register_operand" "r")))
(const_int 32))))
(set (match_operand:SI 1 "mep_lo_operand" "=l")
(mult:SI (match_dup 2)
(match_dup 3)))]
"TARGET_OPT_MULT"
"mulu\\t%2, %3"
[(set_attr "length" "2")
(set_attr "stall" "mul")])
(define_insn "umulsi3_highpart"
[(set (match_operand:SI 0 "mep_hi_operand" "=h")
(truncate:SI
(lshiftrt:DI
(mult:DI (zero_extend:DI
(match_operand:SI 1 "register_operand" "r"))
(zero_extend:DI
(match_operand:SI 2 "register_operand" "r")))
(const_int 32))))
(clobber (reg:SI LO_REGNO))]
"TARGET_OPT_MULT"
"mulu %1, %2"
[(set_attr "length" "2")
(set_attr "stall" "mul")])
;; These two don't currently match because we don't have an adddi3 pattern.
(define_insn "*smultdi_and_add"
[(set (match_operand:DI 0 "mep_hi_operand" "=d")
(plus:DI (mult:DI (zero_extend:DI
(match_operand:SI 1 "register_operand" "r"))
(zero_extend:DI
(match_operand:SI 2 "register_operand" "r")))
(match_operand:DI 3 "mep_hi_operand" "0")))]
"TARGET_OPT_MULT && TARGET_BIG_ENDIAN"
"maddu\\t%1, %2"
[(set_attr "length" "4")
(set_attr "stall" "mul")])
(define_insn "*umultdi_and_add"
[(set (match_operand:DI 0 "mep_hi_operand" "=d")
(plus:DI (mult:DI (sign_extend:DI
(match_operand:SI 1 "register_operand" "r"))
(sign_extend:DI
(match_operand:SI 2 "register_operand" "r")))
(match_operand:DI 3 "mep_hi_operand" "0")))]
"TARGET_OPT_MULT && TARGET_BIG_ENDIAN"
"madd\\t%1, %2"
[(set_attr "length" "4")
(set_attr "stall" "mul")])
;; A pattern for 'r1 = r2 * r3 + r4'. There are three possible
;; implementations:
;;
;; (1) 'mulr;add3'. This is usually the best choice if the instruction
;; is not part of a natural multiply-accumulate chain. It has the
;; same latency as 'stc;maddr' but doesn't tie up $lo for as long.
;;
;; (2) 'madd'. This is the best choice if the instruction is in the
;; middle of a natural multiply-accumulate chain. r4 will already
;; be in $lo and r1 will also be needed in $lo.
;;
;; (3) 'maddr'. This is the best choice if the instruction is at the
;; end of a natural multiply-accumulate chain. r4 will be in $lo
;; but r1 will be needed in a GPR.
;;
;; In theory, we could put all the alternatives into a single pattern and
;; leave the register allocator to choose between them. However, this can
;; sometimes produce poor results in practice.
;;
;; This pattern therefore describes a general GPR-to-GPR operation that
;; has a slight preference for cases in which operands 0 and 1 are tied.
;; After reload, we try to rewrite the patterns using peephole2s (if
;; enabled), falling back on define_splits if that fails. See also
;; mep_reuse_lo_p.
(define_insn "maddsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "%0,r")
(match_operand:SI 2 "register_operand" "r,r"))
(match_operand:SI 3 "register_operand" "r,r")))
(clobber (match_scratch:SI 4 "=l,l"))
(clobber (match_scratch:SI 5 "=h,h"))]
"TARGET_OPT_MULT"
"#"
[(set_attr "length" "8")
(set_attr "stall" "mulr")])
;; Implement maddsi3s using maddr if operand 3 is already available in $lo.
(define_peephole2
[(parallel
[(set (match_operand:SI 0 "register_operand" "")
(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" ""))
(match_operand:SI 3 "register_operand" "")))
(clobber (match_scratch:SI 4 ""))
(clobber (match_scratch:SI 5 ""))])]
"TARGET_OPT_MULT
&& reload_completed
&& mep_reuse_lo_p (operands[4], operands[3], insn,
!rtx_equal_p (operands[1], operands[3])
&& !rtx_equal_p (operands[2], operands[3])
&& (rtx_equal_p (operands[0], operands[3])
|| peep2_reg_dead_p (1, operands[3])))"
[(parallel
[(set (match_dup 4)
(plus:SI (mult:SI (match_dup 0)
(match_dup 2))
(match_dup 4)))
(set (match_dup 0)
(plus:SI (mult:SI (match_dup 0)
(match_dup 2))
(match_dup 4)))
(clobber (match_dup 5))])]
"operands[2] = mep_mulr_source (0, operands[0], operands[1], operands[2]);")
;; This splitter implements maddsi3 as "mulr;add3". It only works if
;; operands 0 and 3 are distinct, since operand 0 is clobbered before
;; operand 3 is used.
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" ""))
(match_operand:SI 3 "register_operand" "")))
(clobber (match_scratch:SI 4 ""))
(clobber (match_scratch:SI 5 ""))]
"TARGET_OPT_MULT
&& reload_completed
&& !rtx_equal_p (operands[0], operands[3])"
[(parallel [(set (match_dup 0)
(mult:SI (match_dup 0)
(match_dup 2)))
(clobber (match_dup 4))
(clobber (match_dup 5))])
(set (match_dup 0)
(plus:SI (match_dup 0)
(match_dup 3)))]
"operands[2] = mep_mulr_source (0, operands[0], operands[1], operands[2]);")
;; This is the fallback splitter for maddsi3. It moves operand 3 into
;; $lo and then uses maddr.
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" ""))
(match_operand:SI 3 "register_operand" "")))
(clobber (match_scratch:SI 4 ""))
(clobber (match_scratch:SI 5 ""))]
"TARGET_OPT_MULT
&& reload_completed"
[(parallel [(set (match_dup 4)
(plus:SI (mult:SI (match_dup 0)
(match_dup 2))
(match_dup 4)))
(set (match_dup 0)
(plus:SI (mult:SI (match_dup 0)
(match_dup 2))
(match_dup 4)))
(clobber (match_dup 5))])]
{
emit_move_insn (operands[4], operands[3]);
operands[2] = mep_mulr_source (0, operands[0], operands[1], operands[2]);
})
;; Remove unnecessary stcs to $lo. This cleans up the moves generated
;; by earlier calls to mep_reuse_lo_p.
(define_peephole2
[(set (match_operand:SI 0 "mep_lo_operand" "")
(match_operand:SI 1 "register_operand" ""))]
"TARGET_OPT_MULT
&& mep_reuse_lo_p (operands[0], operands[1], insn,
peep2_reg_dead_p (1, operands[1]))"
[(const_int 0)]
{
emit_note (NOTE_INSN_DELETED);
DONE;
})
(define_insn "maddsi3_lo"
[(set (match_operand:SI 0 "mep_lo_operand" "=l")
(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "register_operand" "r"))
(match_operand:SI 3 "mep_lo_operand" "0")))
(clobber (match_scratch:SI 4 "=h"))]
"TARGET_OPT_MULT && reload_completed"
"madd\\t%1, %2"
[(set_attr "length" "4")
(set_attr "stall" "mul")])
(define_insn "maddsi3r"
[(set (match_operand:SI 0 "mep_lo_operand" "=l")
(plus:SI (mult:SI (match_operand:SI 2 "register_operand" "1")
(match_operand:SI 3 "register_operand" "r"))
(match_operand:SI 4 "register_operand" "0")))
(set (match_operand:SI 1 "register_operand" "=r")
(plus:SI (mult:SI (match_dup 2)
(match_dup 3))
(match_dup 4)))
(clobber (match_scratch:SI 5 "=h"))]
"TARGET_OPT_MULT && reload_completed"
"maddr\\t%2, %3"
[(set_attr "length" "4")
(set_attr "stall" "mulr")])
(define_insn "*shift_1_or_2_and_add"
[(set (match_operand:SI 0 "mep_r0_operand" "=z")
(plus:SI (mult:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "mep_slad_operand" "n"))
(match_operand:SI 3 "register_operand" "r")))]
""
"sl%b2ad3\\t%0, %1, %3"
[(set_attr "length" "2")
(set_attr "stall" "int2")])
(define_insn "divmodsi4"
[(set (match_operand:SI 0 "mep_lo_operand" "=l")
(div:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "register_operand" "r")))
(set (match_operand:SI 3 "mep_hi_operand" "=h")
(mod:SI (match_dup 1)
(match_dup 2)))]
"TARGET_OPT_DIV"
"div\\t%1, %2"
[(set_attr "length" "2")
(set_attr "stall" "div")
(set_attr "may_trap" "yes")])
(define_insn "udivmodsi4"
[(set (match_operand:SI 0 "mep_lo_operand" "=l")
(udiv:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "register_operand" "r")))
(set (match_operand:SI 3 "mep_hi_operand" "=h")
(umod:SI (match_dup 1)
(match_dup 2)))]
"TARGET_OPT_DIV"
"divu\\t%1, %2"
[(set_attr "length" "2")
(set_attr "stall" "div")
(set_attr "may_trap" "yes")])
(define_insn "negsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(neg:SI (match_operand:SI 1 "register_operand" "r")))]
""
"neg\\t%0, %1"
[(set_attr "length" "2")])
;; We have "absolute difference between two regs" which isn't quite
;; what gcc is expecting.
(define_expand "abssi2"
[(set (match_dup 2) (const_int 0))
(set (match_operand:SI 0 "register_operand" "")
(abs:SI (minus:SI (match_operand:SI 1 "register_operand" "")
(match_dup 2))
))]
"TARGET_OPT_ABSDIFF"
"operands[2] = gen_reg_rtx (SImode);")
(define_insn "*absdiff"
[(set (match_operand:SI 0 "register_operand" "=r")
(abs:SI (minus:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r"))))]
"TARGET_OPT_ABSDIFF"
"abs\\t%0, %2"
[(set_attr "length" "4")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(abs:SI (plus:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "immediate_operand" ""))))
(clobber (match_operand:SI 3 "register_operand" ""))]
"!reload_completed"
[(set (match_dup 3)
(match_dup 4))
(set (match_operand:SI 0 "register_operand" "")
(abs:SI (minus:SI (match_operand:SI 1 "register_operand" "")
(match_dup 3))))]
"operands[4] = GEN_INT (-INTVAL (operands[2]));")
(define_insn "sminsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(smin:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "nonmemory_operand" "r")))]
"TARGET_OPT_MINMAX"
"min\\t%0, %2"
[(set_attr "length" "4")])
(define_insn "smaxsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(smax:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "nonmemory_operand" "r")))]
"TARGET_OPT_MINMAX"
"max\\t%0, %2"
[(set_attr "length" "4")])
(define_insn "uminsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(umin:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "nonmemory_operand" "r")))]
"TARGET_OPT_MINMAX"
"minu\\t%0, %2"
[(set_attr "length" "4")])
(define_insn "umaxsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(umax:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "nonmemory_operand" "r")))]
"TARGET_OPT_MINMAX"
"maxu\\t%0, %2"
[(set_attr "length" "4")])
;; Average: a = (b+c+1)>>1
(define_insn "*averagesi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(ashiftrt:SI (plus:SI (plus:SI
(match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r"))
(const_int 1))
(const_int 1)))]
"TARGET_OPT_AVERAGE"
"ave\\t%0, %2"
[(set_attr "length" "4")])
;; clip support
(define_insn "clip_maxmin"
[(set (match_operand:SI 0 "register_operand" "=r")
(smax:SI (smin:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "immediate_operand" "n"))
(match_operand:SI 3 "immediate_operand" "n")))]
"mep_allow_clip (operands[2], operands[3], 1)"
"clip\\t%0, %B2"
[(set_attr "length" "4")])
(define_insn "clip_minmax"
[(set (match_operand:SI 0 "register_operand" "=r")
(smin:SI (smax:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "immediate_operand" "n"))
(match_operand:SI 3 "immediate_operand" "n")))]
"mep_allow_clip (operands[3], operands[2], 1)"
"clip\\t%0, %B3"
[(set_attr "length" "4")])
(define_insn "clipu_maxmin"
[(set (match_operand:SI 0 "register_operand" "=r")
(smax:SI (smin:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "immediate_operand" "n"))
(match_operand:SI 3 "immediate_operand" "n")))]
"mep_allow_clip (operands[2], operands[3], 0)"
"clipu\\t%0, %U2"
[(set_attr "length" "4")])
(define_insn "clipu_minmax"
[(set (match_operand:SI 0 "register_operand" "=r")
(smin:SI (smax:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "immediate_operand" "n"))
(match_operand:SI 3 "immediate_operand" "n")))]
"mep_allow_clip (operands[3], operands[2], 0)"
"clipu\\t%0, %U3"
[(set_attr "length" "4")])
;; ::::::::::::::::::::
;; ::
;; :: 32 bit Integer Shifts and Rotates
;; ::
;; ::::::::::::::::::::
(define_insn "ashlsi3"
[(set (match_operand:SI 0 "register_operand" "=r,z")
(ashift:SI (match_operand:SI 1 "register_operand" "0,r")
(match_operand:SI 2 "nonmemory_operand" "rM,M")))]
""
"@
sll\\t%0, %2
sll3\\t%0, %1, %2"
[(set_attr "length" "2,2")
(set_attr "shiftop" "operand2")])
(define_insn "ashrsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(ashiftrt:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "nonmemory_operand" "rM")))]
""
"sra\\t%0, %2"
[(set_attr "length" "2")
(set_attr "shiftop" "operand2")])
(define_insn "lshrsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(lshiftrt:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "nonmemory_operand" "rM")))]
""
"srl\\t%0, %2"
[(set_attr "length" "2")
(set_attr "shiftop" "operand2")])
;; ::::::::::::::::::::
;; ::
;; :: 32 Bit Integer Logical operations
;; ::
;; ::::::::::::::::::::
(define_insn "andsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(and:SI (match_operand:SI 1 "register_operand" "%0,r")
(match_operand:SI 2 "nonmemory_operand" "r,J")))]
""
"@
and\\t%0, %2
and3\\t%0, %1, %J2"
[(set_attr "length" "2,4")])
(define_insn "iorsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(ior:SI (match_operand:SI 1 "register_operand" "%0,r")
(match_operand:SI 2 "nonmemory_operand" "r,J")))]
""
"@
or\\t%0, %2
or3\\t%0, %1, %J2"
[(set_attr "length" "2,4")])
(define_insn "xorsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(xor:SI (match_operand:SI 1 "register_operand" "%0,r")
(match_operand:SI 2 "nonmemory_operand" "r,J")))]
""
"@
xor\\t%0, %2
xor3\\t%0, %1, %J2"
[(set_attr "length" "2,4")])
(define_expand "one_cmplsi2"
[(set (match_operand:SI 0 "register_operand" "")
(not:SI (match_operand:SI 1 "register_operand" "")))]
""
"operands[2] = operands[1];
")
;; No separate insn for this; use NOR
(define_insn "*one_cmplsi3_internal"
[(set (match_operand:SI 0 "register_operand" "=r")
(not:SI (match_operand:SI 1 "register_operand" "0")))]
""
"nor\\t%0, %0"
[(set_attr "length" "2")])
;; ::::::::::::::::::::
;; ::
;; :: Bit Manipulation
;; ::
;; ::::::::::::::::::::
(define_insn "*bitop_be"
[(set (match_operand:QI 0 "mep_Y_operand" "=Y")
(subreg:QI (match_operator:SI 3 "mep_bit_operator"
[(subreg:SI (match_operand:QI 1 "mep_Y_operand" "0") 0)
(match_operand 2 "immediate_operand" "n")])
3)
)]
"TARGET_BIG_ENDIAN && TARGET_OPT_BITOPS
&& rtx_equal_p (operands[0], operands[1])"
"b%L3m\\t%0, %b2"
[(set_attr "length" "2")])
(define_insn "*bitop_le"
[(set (match_operand:QI 0 "mep_Y_operand" "=Y")
(subreg:QI (match_operator:SI 3 "mep_bit_operator"
[(subreg:SI (match_operand:QI 1 "mep_Y_operand" "0") 0)
(match_operand 2 "immediate_operand" "n")])
0)
)]
"!TARGET_BIG_ENDIAN && TARGET_OPT_BITOPS
&& rtx_equal_p (operands[0], operands[1])"
"b%L3m\\t%0, %b2"
[(set_attr "length" "2")])
(define_insn "btstm"
[(set (match_operand:SI 0 "mep_r0_operand" "=z")
(and:SI (subreg:SI (match_operand:QI 1 "mep_Y_operand" "Y") 0)
(match_operand 2 "immediate_operand" "n"))
)]
"TARGET_OPT_BITOPS && mep_bit_position_p (operands[2], 1)"
"btstm\\t%0, %1, %b2"
[(set_attr "length" "2")])
(define_insn "tas"
[(parallel [(set (match_operand:SI 0 "mep_r0_operand" "=z")
(zero_extend:SI (match_operand:QI 1 "mep_Y_operand" "+Y")))
(set (match_dup 1)
(const_int 1))
]
)]
"TARGET_OPT_BITOPS"
"tas\\t%0, %1"
[(set_attr "length" "2")])
(define_peephole2
[(set (match_operand:SI 0 "mep_r0_operand" "")
(zero_extend:SI (match_operand:QI 1 "mep_Y_operand" "")))
(set (match_operand:QI 2 "register_operand" "")
(const_int 1))
(set (match_dup 1)
(match_dup 2))
]
"TARGET_OPT_BITOPS"
[(parallel [(set (match_dup 0)
(zero_extend:SI (match_dup 1)))
(set (match_dup 1)
(const_int 1))
])]
"")
(define_peephole2
[(set (match_operand:SI 0 "mep_r0_operand" "")
(sign_extend:SI (match_operand:QI 1 "mep_Y_operand" "")))
(set (match_operand:QI 2 "register_operand" "")
(const_int 1))
(set (match_dup 1)
(match_dup 2))
]
"TARGET_OPT_BITOPS"
[(parallel [(set (match_dup 0)
(zero_extend:SI (match_dup 1)))
(set (match_dup 1)
(const_int 1))
])
(set (match_dup 0)
(sign_extend:SI (match_dup 3)))]
"operands[3] = gen_lowpart (QImode, operands[0]);")
;; ::::::::::::::::::::
;; ::
;; :: Conditional branches and stores
;; ::
;; ::::::::::::::::::::
(define_expand "cbranchsi4"
[(set (pc)
(if_then_else (match_operator 0 "ordered_comparison_operator"
[(match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "nonmemory_operand" "")])
(label_ref (match_operand 3 "" ""))
(pc)))]
""
"emit_jump_insn (gen_branch_true (operands[3],
mep_expand_cbranch (operands)));
DONE;")
(define_expand "branch_true"
[(set (pc)
(if_then_else (match_operand 1 "" "")
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"")
(define_expand "cstoresi4"
[(set (match_operand:SI 0 "register_operand" "")
(match_operator:SI 1 "ordered_comparison_operator"
[(match_operand:SI 2 "register_operand" "")
(match_operand:SI 3 "nonmemory_operand" "")]))]
""
"if (mep_expand_setcc (operands)) DONE; else FAIL;")
;; ------------------------------------------------------------
(define_insn "*slt"
[(set (match_operand:SI 0 "register_operand" "=z,z,r")
(lt:SI (match_operand:SI 1 "register_operand" "r,r,r")
(match_operand:SI 2 "nonmemory_operand" "r,M,I")))]
""
"slt3\\t%0, %1, %2"
[(set_attr "length" "2,2,4")])
(define_insn "*sltu"
[(set (match_operand:SI 0 "register_operand" "=z,z,r")
(ltu:SI (match_operand:SI 1 "register_operand" "r,r,r")
(match_operand:SI 2 "nonmemory_operand" "r,M,J")))]
""
"sltu3\\t%0, %1, %2"
[(set_attr "length" "2,2,4")])
(define_insn "*bcpeq_true"
[(set (pc)
(if_then_else (eq:SI (reg:SI CBCR_REGNO)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"bcpeq\t0, %l0"
[(set_attr "length" "4")])
(define_insn "*bcpeq_false"
[(set (pc)
(if_then_else (eq:SI (reg:SI CBCR_REGNO)
(const_int 0))
(pc)
(label_ref (match_operand 0 "" ""))))]
""
"bcpne\t0, %l0"
[(set_attr "length" "4")])
(define_insn "*bcpne_true"
[(set (pc)
(if_then_else (ne:SI (reg:SI CBCR_REGNO)
(const_int 0))
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"bcpne\t0, %l0"
[(set_attr "length" "4")])
(define_insn "*bcpne_false"
[(set (pc)
(if_then_else (ne:SI (reg:SI CBCR_REGNO)
(const_int 0))
(pc)
(label_ref (match_operand 0 "" ""))))]
""
"bcpeq\t0, %l0"
[(set_attr "length" "4")])
;; ??? The lengths here aren't correct, since no attempt it made to
;; find "beqz" in the 256-byte range. However, this should not affect
;; bundling, since we never run core branches in parallel.
(define_insn "mep_beq_true"
[(set (pc)
(if_then_else (eq (match_operand:SI 0 "register_operand" "r")
(match_operand:SI 1 "mep_reg_or_imm4_operand" "rN"))
(label_ref (match_operand 2 "" ""))
(pc)))]
""
"* return mep_emit_cbranch (operands, 0);"
[(set_attr "length" "4")] )
(define_insn "*beq_false"
[(set (pc)
(if_then_else (eq (match_operand:SI 0 "register_operand" "r")
(match_operand:SI 1 "mep_reg_or_imm4_operand" "rN"))
(pc)
(label_ref (match_operand 2 "" ""))))]
""
"* return mep_emit_cbranch (operands, 1);"
[(set_attr "length" "4")])
(define_insn "mep_bne_true"
[(set (pc)
(if_then_else (ne (match_operand:SI 0 "register_operand" "r")
(match_operand:SI 1 "mep_reg_or_imm4_operand" "rN"))
(label_ref (match_operand 2 "" ""))
(pc)))]
""
"* return mep_emit_cbranch (operands, 1); "
[(set_attr "length" "4")])
(define_insn "*bne_false"
[(set (pc)
(if_then_else (ne (match_operand:SI 0 "register_operand" "r")
(match_operand:SI 1 "mep_reg_or_imm4_operand" "rN"))
(pc)
(label_ref (match_operand 2 "" ""))))]
""
"* return mep_emit_cbranch (operands, 0); "
[(set_attr "length" "4")])
(define_insn "mep_blti"
[(set (pc)
(if_then_else (lt (match_operand:SI 0 "register_operand" "r")
(match_operand:SI 1 "mep_imm4_operand" "N"))
(label_ref (match_operand 2 "" ""))
(pc)))]
""
"blti\\t%0, %1, %l2"
[(set_attr "length" "4")])
(define_insn "*bgei"
[(set (pc)
(if_then_else (ge (match_operand:SI 0 "register_operand" "r")
(match_operand:SI 1 "mep_imm4_operand" "N"))
(label_ref (match_operand 2 "" ""))
(pc)))]
""
"bgei\\t%0, %1, %l2"
[(set_attr "length" "4")])
;; ::::::::::::::::::::
;; ::
;; :: Call and branch instructions
;; ::
;; ::::::::::::::::::::
(define_expand "call"
[(parallel [(call (match_operand:QI 0 "" "")
(match_operand:SI 1 "" ""))
(use (match_operand:SI 2 "" ""))
(clobber (reg:SI REGSAVE_CONTROL_TEMP))
])]
""
"
{
mep_expand_call (operands, 0);
DONE;
}")
(define_insn "call_internal"
[(call (mem (match_operand:SI 0 "mep_call_address_operand" "R,r"))
(match_operand:SI 1 "" ""))
(use (match_operand:SI 2 "const_int_operand" ""))
(use (match_operand:SI 3 "mep_tp_operand" "b,b"))
(use (match_operand:SI 4 "mep_gp_operand" "v,v"))
(clobber (reg:SI LP_REGNO))
(clobber (reg:SI REGSAVE_CONTROL_TEMP))
]
""
{
static char const pattern[2][2][8] =
{
{ "bsrv\t%0", "jsrv\t%0" },
{ "bsr\t%0", "jsr\t%0" }
};
return pattern[mep_vliw_mode_match (operands[2])][which_alternative];
}
[(set_attr "length" "4,2")])
(define_expand "sibcall"
[(parallel [(call (match_operand:QI 0 "" "")
(match_operand:SI 1 "" ""))
(use (match_operand:SI 2 "" ""))
(use (reg:SI LP_REGNO))
(clobber (reg:SI REGSAVE_CONTROL_TEMP))
])]
""
"")
(define_insn "*sibcall_internal"
[(call (mem (match_operand:SI 0 "mep_nearsym_operand" "s"))
(match_operand:SI 1 "" ""))
(use (match_operand:SI 2 "const_int_operand" ""))
(use (reg:SI LP_REGNO))
(clobber (reg:SI REGSAVE_CONTROL_TEMP))
]
"SIBLING_CALL_P (insn)"
{
if (mep_vliw_jmp_match (operands[2]))
return "jmp\t%0";
else if (mep_vliw_mode_match (operands[2]))
return
"movu $0, %0\n\
jmp $0";
else
return
"ldc $12, $lp\n\
movh $11, %%hi(%0)\n\
xor3 $12, $12, 1\n\
add3 $11, $11, %%lo(%0+1)\n\
stc $12, $lp\n\
jmp $11";
}
[(set_attr "length" "48")
(set_attr "slot" "multi")])
(define_expand "call_value"
[(parallel [(set (match_operand 0 "" "")
(call (match_operand:QI 1 "" "")
(match_operand:SI 2 "" "")))
(use (match_operand:SI 3 "" ""))
(clobber (reg:SI REGSAVE_CONTROL_TEMP))
])]
""
"
{
mep_expand_call (operands, 1);
DONE;
}")
(define_insn "call_value_internal"
[(set (match_operand 0 "register_operand" "=rx,rx")
(call (mem:SI (match_operand:SI 1 "mep_call_address_operand" "R,r"))
(match_operand:SI 2 "" "")))
(use (match_operand:SI 3 "const_int_operand" ""))
(use (match_operand:SI 4 "mep_tp_operand" "b,b"))
(use (match_operand:SI 5 "mep_gp_operand" "v,v"))
(clobber (reg:SI LP_REGNO))
(clobber (reg:SI REGSAVE_CONTROL_TEMP))
]
""
{
static char const pattern[2][2][8] =
{
{ "bsrv\t%1", "jsrv\t%1" },
{ "bsr\t%1", "jsr\t%1" }
};
return pattern[mep_vliw_mode_match (operands[3])][which_alternative];
}
[(set_attr "length" "4,2")])
(define_expand "sibcall_value"
[(parallel [(set (match_operand 0 "" "")
(call (match_operand:QI 1 "" "")
(match_operand:SI 2 "" "")))
(use (match_operand:SI 3 "" ""))
(use (reg:SI LP_REGNO))
(clobber (reg:SI REGSAVE_CONTROL_TEMP))
])]
""
"")
(define_insn "*sibcall_value_internal"
[(set (match_operand 0 "register_operand" "=rx")
(call (mem (match_operand:SI 1 "mep_nearsym_operand" "s"))
(match_operand:SI 2 "" "")))
(use (match_operand:SI 3 "const_int_operand" ""))
(use (reg:SI LP_REGNO))
(clobber (reg:SI REGSAVE_CONTROL_TEMP))
]
"SIBLING_CALL_P (insn)"
{
if (mep_vliw_jmp_match (operands[3]))
return "jmp\t%1";
else if (mep_vliw_mode_match (operands[3]))
return
"movu $0, %1\n\
jmp $0";
else
return
"ldc $12, $lp\n\
movh $11, %%hi(%1)\n\
xor3 $12, $12, 1\n\
add3 $11, $11, %%lo(%1+1)\n\
stc $12, $lp\n\
jmp $11";
}
[(set_attr "length" "48")
(set_attr "slot" "multi")])
(define_insn "return_internal"
[(return)
(use (match_operand:SI 0 "register_operand" ""))]
""
"* return (REGNO (operands[0]) == LP_REGNO) ? \"ret\" : \"jmp\\t%0\";"
[(set_attr "length" "2")
(set_attr "stall" "ret")])
(define_insn "eh_return_internal"
[(return)
(use (reg:SI 10))
(use (reg:SI 11))
(use (reg:SI LP_REGNO))
(clobber (reg:SI REGSAVE_CONTROL_TEMP))
]
""
"ret"
[(set_attr "length" "2")
(set_attr "stall" "ret")])
;; The assembler replaces short jumps with long jumps as needed.
(define_insn "jump"
[(set (pc) (label_ref (match_operand 0 "" "")))]
""
"bra\\t%l0"
[(set_attr "length" "4")])
(define_insn "indirect_jump"
[(set (pc) (match_operand:SI 0 "register_operand" "r"))]
""
"jmp\\t%0"
[(set_attr "length" "2")])
(define_insn "tablejump"
[(set (pc) (match_operand:SI 0 "register_operand" "r"))
(use (label_ref (match_operand 1 "" "")))]
""
"jmp\\t%0"
[(set_attr "length" "2")])
;; ::::::::::::::::::::
;; ::
;; :: Low Overhead Looping
;; ::
;; ::::::::::::::::::::
;; This insn is volatile because we'd like it to stay in its original
;; position, just before the loop header. If it stays there, we might
;; be able to convert it into a "repeat" insn.
(define_insn "doloop_begin_internal"
[(set (match_operand:SI 0 "register_operand" "=r")
(unspec_volatile:SI
[(match_operand:SI 1 "register_operand" "0")
(match_operand 2 "const_int_operand" "")] UNS_REPEAT_BEG))]
""
{ gcc_unreachable (); }
[(set_attr "length" "4")])
(define_expand "doloop_begin"
[(use (match_operand 0 "register_operand" ""))
(use (match_operand:QI 1 "const_int_operand" ""))
(use (match_operand:QI 2 "const_int_operand" ""))
(use (match_operand:QI 3 "const_int_operand" ""))]
"!profile_arc_flag && TARGET_OPT_REPEAT"
"if (INTVAL (operands[3]) > 1)
FAIL;
mep_emit_doloop (operands, 0);
DONE;
")
(define_insn "doloop_end_internal"
[(set (pc)
(if_then_else (ne (match_operand:SI 0 "nonimmediate_operand" "+r,cxy,*m")
(const_int 0))
(label_ref (match_operand 1 "" ""))
(pc)))
(set (match_dup 0)
(plus:SI (match_dup 0)
(const_int -1)))
(unspec [(match_operand 2 "const_int_operand" "")] UNS_REPEAT_END)
(clobber (match_scratch:SI 3 "=X,&r,&r"))]
""
{ gcc_unreachable (); }
;; Worst case length:
;;
;; lw <op3>,<op0> 4
;; add <op3>,-1 2
;; sw <op3>,<op0> 4
;; jmp <op1> 4
;; 1f:
[(set_attr "length" "14")
(set_attr "slot" "multi")])
(define_expand "doloop_end"
[(use (match_operand 0 "nonimmediate_operand" ""))
(use (match_operand:QI 1 "const_int_operand" ""))
(use (match_operand:QI 2 "const_int_operand" ""))
(use (match_operand:QI 3 "const_int_operand" ""))
(use (label_ref (match_operand 4 "" "")))]
"!profile_arc_flag && TARGET_OPT_REPEAT"
"if (INTVAL (operands[3]) > 1)
FAIL;
if (GET_CODE (operands[0]) == REG && GET_MODE (operands[0]) != SImode)
FAIL;
mep_emit_doloop (operands, 1);
DONE;
")
(define_insn "repeat"
[(set (reg:SI RPC_REGNO)
(unspec:SI [(match_operand:SI 0 "mep_r0_15_operand" "r")
(match_operand:SI 1 "" "")]
UNS_REPEAT_BEG))]
""
"repeat\\t%0,%l1"
[(set_attr "length" "4")])
(define_insn "repeat_end"
[(unspec [(const_int 0)] UNS_REPEAT_END)]
""
"# repeat end"
[(set_attr "length" "0")])
(define_insn "erepeat"
[(unspec [(match_operand 0 "" "")] UNS_EREPEAT_BEG)]
""
"erepeat\\t%l0"
[(set_attr "length" "4")])
(define_insn "erepeat_end"
[(unspec [(const_int 0)] UNS_EREPEAT_END)]
""
"# erepeat end"
[(set_attr "length" "0")
(set_attr "slot" "multi")])
;; ::::::::::::::::::::
;; ::
;; :: Prologue and Epilogue instructions
;; ::
;; ::::::::::::::::::::
(define_expand "prologue"
[(const_int 1)]
""
"
{
mep_expand_prologue ();
DONE;
}")
(define_expand "epilogue"
[(return)]
""
"
{
mep_expand_epilogue ();
DONE;
}")
(define_expand "eh_return"
[(use (match_operand:SI 0 "register_operand" "r"))]
""
"
{
mep_expand_eh_return (operands);
DONE;
}")
(define_insn_and_split "eh_epilogue"
[(unspec [(match_operand:SI 0 "register_operand" "r")] UNS_EH_EPILOGUE)
(use (reg:SI LP_REGNO))]
""
"#"
"epilogue_completed"
[(const_int 1)]
"mep_emit_eh_epilogue (operands); DONE;"
[(set_attr "slot" "multi")])
(define_expand "sibcall_epilogue"
[(const_int 0)]
""
"
{
mep_expand_sibcall_epilogue ();
DONE;
}")
(define_insn "mep_bb_trace_ret"
[(unspec_volatile [(const_int 0)] UNS_BB_TRACE_RET)]
""
"* return mep_emit_bb_trace_ret ();"
[(set_attr "slot" "multi")])
(define_insn "mep_disable_int"
[(unspec_volatile [(const_int 0)] UNS_DISABLE_INT)]
""
"di"
[(set_attr "length" "2")])
(define_insn "mep_enable_int"
[(unspec_volatile [(const_int 0)] UNS_ENABLE_INT)]
""
"ei"
[(set_attr "length" "2")])
(define_insn "mep_reti"
[(return)
(unspec_volatile [(const_int 0)] UNS_RETI)]
""
"reti"
[(set_attr "length" "2")])
;; ::::::::::::::::::::
;; ::
;; :: Miscellaneous instructions
;; ::
;; ::::::::::::::::::::
(define_insn "nop"
[(const_int 0)]
""
"nop"
[(set_attr "length" "2")])
(define_insn "nop32"
[(const_int 1)]
""
"or3\\t$0, $0, 0"
[(set_attr "length" "4")])
(define_insn "blockage"
[(unspec_volatile [(const_int 0)] UNS_BLOCKAGE)]
""
""
[(set_attr "length" "0")
(set_attr "slot" "multi")])
(define_insn "djmark"
[(unspec_volatile [(const_int 0)] 999)]
""
"# dj"
[(set_attr "length" "0")
(set_attr "slot" "multi")])