Subversion Repositories openrisc

;; MIPS Paired-Single Floating and MIPS-3D Instructions.
;; Copyright (C) 2004, 2007, 2010 Free Software Foundation, Inc.
;;
;; This file is part of GCC.
;;
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;;
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3.  If not see
;; <http://www.gnu.org/licenses/>.

(define_c_enum "unspec" [
  UNSPEC_MOVE_TF_PS
  UNSPEC_C

  ;; MIPS64/MIPS32R2 alnv.ps
  UNSPEC_ALNV_PS

  ;; MIPS-3D instructions
  UNSPEC_CABS

  UNSPEC_ADDR_PS
  UNSPEC_CVT_PW_PS
  UNSPEC_CVT_PS_PW
  UNSPEC_MULR_PS
  UNSPEC_ABS_PS

  UNSPEC_RSQRT1
  UNSPEC_RSQRT2
  UNSPEC_RECIP1
  UNSPEC_RECIP2
  UNSPEC_SINGLE_CC
  UNSPEC_SCC
])

(define_insn "*movcc_v2sf_<mode>"
  [(set (match_operand:V2SF 0 "register_operand" "=f,f")
        (if_then_else:V2SF
         (match_operator:GPR 4 "equality_operator"
                         [(match_operand:GPR 1 "register_operand" "d,d")
                          (const_int 0)])
         (match_operand:V2SF 2 "register_operand" "f,0")
         (match_operand:V2SF 3 "register_operand" "0,f")))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  "@
    mov%T4.ps\t%0,%2,%1
    mov%t4.ps\t%0,%3,%1"
  [(set_attr "type" "condmove")
   (set_attr "mode" "SF")])

(define_insn "mips_cond_move_tf_ps"
  [(set (match_operand:V2SF 0 "register_operand" "=f,f")
        (unspec:V2SF [(match_operand:V2SF 1 "register_operand" "f,0")
                      (match_operand:V2SF 2 "register_operand" "0,f")
                      (match_operand:CCV2 3 "register_operand" "z,z")]
                     UNSPEC_MOVE_TF_PS))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  "@
    movt.ps\t%0,%1,%3
    movf.ps\t%0,%2,%3"
  [(set_attr "type" "condmove")
   (set_attr "mode" "SF")])

(define_expand "movv2sfcc"
  [(set (match_dup 4) (match_operand 1 "comparison_operator"))
   (set (match_operand:V2SF 0 "register_operand")
        (if_then_else:V2SF (match_dup 5)
                           (match_operand:V2SF 2 "register_operand")
                           (match_operand:V2SF 3 "register_operand")))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  /* We can only support MOVN.PS and MOVZ.PS.
     NOTE: MOVT.PS and MOVF.PS have different semantics from MOVN.PS and 
           MOVZ.PS.  MOVT.PS and MOVF.PS depend on two CC values and move 
           each item independently.  */

  if (GET_MODE_CLASS (GET_MODE (XEXP (operands[1], 0))) != MODE_INT)
    FAIL;

  mips_expand_conditional_move (operands);
  DONE;
})

(define_insn "vec_perm_const_ps"
  [(set (match_operand:V2SF 0 "register_operand" "=f")
        (vec_select:V2SF
          (vec_concat:V4SF
            (match_operand:V2SF 1 "register_operand" "f")
            (match_operand:V2SF 2 "register_operand" "f"))
          (parallel [(match_operand:SI 3 "const_0_or_1_operand" "")
                     (match_operand:SI 4 "const_2_or_3_operand" "")])))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  /* Let <op>L be the lower part of operand <op> and <op>U be the upper part.
     The P[UL][UL].PS instruction always specifies the upper part of the
     result first, so the instruction is:

        P<aUL><bUL>.PS %0,<aop>,<bop>

     where 0U == <aop><aUL> and 0L == <bop><bUL>.

     GCC's vector indices are specified in memory order, which means
     that vector element 0 is the lower part (L) on little-endian targets
     and the upper part (U) on big-endian targets.  vec_concat likewise
     concatenates in memory order, which means that operand 3 (being
     0 or 1) selects part of operand 1 and operand 4 (being 2 or 3)
     selects part of operand 2.

     Let:

        I3 = INTVAL (operands[3])
        I4 = INTVAL (operands[4]) - 2

     Taking the two endiannesses in turn:

     Little-endian:

        The semantics of the RTL pattern are:

        { 0L, 0U } = { X[I3], X[I4 + 2] }, where X = { 1L, 1U, 2L, 2U }

        so: 0L = { 1L, 1U }[I3] (= <bop><bUL>)
            0U = { 2L, 2U }[I4] (= <aop><aUL>)

            <aop> = 2, <aUL> = I4 ? U : L
            <bop> = 1, <bUL> = I3 ? U : L

            [LL] !I4 && !I3   [UL] I4 && !I3
            [LU] !I4 && I3    [UU] I4 && I3

     Big-endian:

        The semantics of the RTL pattern are:

        { 0U, 0L } = { X[I3], X[I4 + 2] }, where X = { 1U, 1L, 2U, 2L }

        so: 0U = { 1U, 1L }[I3] (= <aop><aUL>)
            0L = { 2U, 2L }[I4] (= <bop><bUL>)

            <aop> = 1, <aUL> = I3 ? L : U
            <bop> = 2, <bUL> = I4 ? L : U

            [UU] !I3 && !I4   [UL] !I3 && I4
            [LU] I3 && !I4    [LL] I3 && I4.  */

  static const char * const mnemonics[2][4] = {
    /* LE */ { "pll.ps\t%0,%2,%1", "pul.ps\t%0,%2,%1",
               "plu.ps\t%0,%2,%1", "puu.ps\t%0,%2,%1" },
    /* BE */ { "puu.ps\t%0,%1,%2", "pul.ps\t%0,%1,%2",
               "plu.ps\t%0,%1,%2", "pll.ps\t%0,%1,%2" },
  };

  unsigned mask = INTVAL (operands[3]) * 2 + (INTVAL (operands[4]) - 2);
  return mnemonics[BYTES_BIG_ENDIAN][mask];
}
  [(set_attr "type" "fmove")
   (set_attr "mode" "SF")])

(define_expand "vec_perm_constv2sf"
  [(match_operand:V2SF 0 "register_operand" "")
   (match_operand:V2SF 1 "register_operand" "")
   (match_operand:V2SF 2 "register_operand" "")
   (match_operand:V2SI 3 "" "")]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  if (mips_expand_vec_perm_const (operands))
    DONE;
  else
    FAIL;
})

;; Expanders for builtins.  The instruction:
;;
;;     P[UL][UL].PS <result>, <a>, <b>
;;
;; says that the upper part of <result> is taken from half of <a> and
;; the lower part of <result> is taken from half of <b>.  This means
;; that the P[UL][UL].PS operand order matches memory order on big-endian
;; targets; <a> is element 0 of the V2SF result while <b> is element 1.
;; However, the P[UL][UL].PS operand order is the reverse of memory order
;; on little-endian targets; <a> is element 1 of the V2SF result while
;; <b> is element 0.  The arguments to vec_perm_const_ps are always in
;; memory order.
;;
;; Similarly, "U" corresponds to element 0 on big-endian targets but
;; to element 1 on little-endian targets.

(define_expand "mips_puu_ps"
  [(match_operand:V2SF 0 "register_operand" "")
   (match_operand:V2SF 1 "register_operand" "")
   (match_operand:V2SF 2 "register_operand" "")]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  if (BYTES_BIG_ENDIAN)
    emit_insn (gen_vec_perm_const_ps (operands[0], operands[1], operands[2],
                                      const0_rtx, const2_rtx));
  else
    emit_insn (gen_vec_perm_const_ps (operands[0], operands[2], operands[1],
                                      const1_rtx, GEN_INT (3)));
  DONE;
})

(define_expand "mips_pul_ps"
  [(match_operand:V2SF 0 "register_operand" "")
   (match_operand:V2SF 1 "register_operand" "")
   (match_operand:V2SF 2 "register_operand" "")]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  if (BYTES_BIG_ENDIAN)
    emit_insn (gen_vec_perm_const_ps (operands[0], operands[1], operands[2],
                                      const0_rtx, GEN_INT (3)));
  else
    emit_insn (gen_vec_perm_const_ps (operands[0], operands[2], operands[1],
                                      const0_rtx, GEN_INT (3)));
  DONE;
})

(define_expand "mips_plu_ps"
  [(match_operand:V2SF 0 "register_operand" "")
   (match_operand:V2SF 1 "register_operand" "")
   (match_operand:V2SF 2 "register_operand" "")]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  if (BYTES_BIG_ENDIAN)
    emit_insn (gen_vec_perm_const_ps (operands[0], operands[1], operands[2],
                                      const1_rtx, const2_rtx));
  else
    emit_insn (gen_vec_perm_const_ps (operands[0], operands[2], operands[1],
                                      const1_rtx, const2_rtx));
  DONE;
})

(define_expand "mips_pll_ps"
  [(match_operand:V2SF 0 "register_operand" "")
   (match_operand:V2SF 1 "register_operand" "")
   (match_operand:V2SF 2 "register_operand" "")]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  if (BYTES_BIG_ENDIAN)
    emit_insn (gen_vec_perm_const_ps (operands[0], operands[1], operands[2],
                                      const1_rtx, GEN_INT (3)));
  else
    emit_insn (gen_vec_perm_const_ps (operands[0], operands[2], operands[1],
                                      const0_rtx, const2_rtx));
  DONE;
})

; vec_init
(define_expand "vec_initv2sf"
  [(match_operand:V2SF 0 "register_operand")
   (match_operand:V2SF 1 "")]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  mips_expand_vector_init (operands[0], operands[1]);
  DONE;
})

(define_insn "vec_concatv2sf"
  [(set (match_operand:V2SF 0 "register_operand" "=f")
        (vec_concat:V2SF
         (match_operand:SF 1 "register_operand" "f")
         (match_operand:SF 2 "register_operand" "f")))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  if (BYTES_BIG_ENDIAN)
    return "cvt.ps.s\t%0,%1,%2";
  else
    return "cvt.ps.s\t%0,%2,%1";
}
  [(set_attr "type" "fcvt")
   (set_attr "mode" "SF")])

;; ??? This is only generated if we perform a vector operation that has to be
;; emulated.  There is no other way to get a vector mode bitfield extract
;; currently.

(define_insn "vec_extractv2sf"
  [(set (match_operand:SF 0 "register_operand" "=f")
        (vec_select:SF (match_operand:V2SF 1 "register_operand" "f")
                       (parallel
                        [(match_operand 2 "const_0_or_1_operand" "")])))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  if (INTVAL (operands[2]) == !BYTES_BIG_ENDIAN)
    return "cvt.s.pu\t%0,%1";
  else
    return "cvt.s.pl\t%0,%1";
}
  [(set_attr "type" "fcvt")
   (set_attr "mode" "SF")])

;; ??? This is only generated if we disable the vec_init pattern.  There is
;; no other way to get a vector mode bitfield store currently.

(define_expand "vec_setv2sf"
  [(set (match_operand:V2SF 0 "register_operand" "")
        (vec_select:V2SF
          (vec_concat:V4SF
            (match_operand:SF 1 "register_operand" "")
            (match_dup 0))
          (parallel [(match_operand 2 "const_0_or_1_operand" "")
                     (match_dup 3)])))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  /* We don't have an insert instruction, so we duplicate the float, and
     then use a PUL instruction.  */
  rtx temp = gen_reg_rtx (V2SFmode);
  emit_insn (gen_vec_concatv2sf (temp, operands[1], operands[1]));
  operands[1] = temp;
  operands[3] = GEN_INT (1 - INTVAL (operands[2]) + 2);
})

; cvt.ps.s - Floating Point Convert Pair to Paired Single
(define_expand "mips_cvt_ps_s"
  [(match_operand:V2SF 0 "register_operand")
   (match_operand:SF 1 "register_operand")
   (match_operand:SF 2 "register_operand")]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  if (BYTES_BIG_ENDIAN)
    emit_insn (gen_vec_concatv2sf (operands[0], operands[1], operands[2]));
  else
    emit_insn (gen_vec_concatv2sf (operands[0], operands[2], operands[1]));
  DONE;
})

; cvt.s.pl - Floating Point Convert Pair Lower to Single Floating Point
(define_expand "mips_cvt_s_pl"
  [(set (match_operand:SF 0 "register_operand")
        (vec_select:SF (match_operand:V2SF 1 "register_operand")
                       (parallel [(match_dup 2)])))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  { operands[2] = GEN_INT (BYTES_BIG_ENDIAN); })

; cvt.s.pu - Floating Point Convert Pair Upper to Single Floating Point
(define_expand "mips_cvt_s_pu"
  [(set (match_operand:SF 0 "register_operand")
        (vec_select:SF (match_operand:V2SF 1 "register_operand")
                       (parallel [(match_dup 2)])))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  { operands[2] = GEN_INT (!BYTES_BIG_ENDIAN); })

; alnv.ps - Floating Point Align Variable
(define_insn "mips_alnv_ps"
  [(set (match_operand:V2SF 0 "register_operand" "=f")
        (unspec:V2SF [(match_operand:V2SF 1 "register_operand" "f")
                      (match_operand:V2SF 2 "register_operand" "f")
                      (match_operand:SI 3 "register_operand" "d")]
                     UNSPEC_ALNV_PS))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  "alnv.ps\t%0,%1,%2,%3"
  [(set_attr "type" "fmove")
   (set_attr "mode" "SF")])

; addr.ps - Floating Point Reduction Add
(define_insn "mips_addr_ps"
  [(set (match_operand:V2SF 0 "register_operand" "=f")
        (unspec:V2SF [(match_operand:V2SF 1 "register_operand" "f")
                      (match_operand:V2SF 2 "register_operand" "f")]
                     UNSPEC_ADDR_PS))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "addr.ps\t%0,%1,%2"
  [(set_attr "type" "fadd")
   (set_attr "mode" "SF")])

(define_insn "reduc_splus_v2sf"
  [(set (match_operand:V2SF 0 "register_operand" "=f")
        (unspec:V2SF [(match_operand:V2SF 1 "register_operand" "f")
                      (match_dup 1)]
                     UNSPEC_ADDR_PS))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "")

; cvt.pw.ps - Floating Point Convert Paired Single to Paired Word
(define_insn "mips_cvt_pw_ps"
  [(set (match_operand:V2SF 0 "register_operand" "=f")
        (unspec:V2SF [(match_operand:V2SF 1 "register_operand" "f")]
                     UNSPEC_CVT_PW_PS))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "cvt.pw.ps\t%0,%1"
  [(set_attr "type" "fcvt")
   (set_attr "mode" "SF")])

; cvt.ps.pw - Floating Point Convert Paired Word to Paired Single
(define_insn "mips_cvt_ps_pw"
  [(set (match_operand:V2SF 0 "register_operand" "=f")
        (unspec:V2SF [(match_operand:V2SF 1 "register_operand" "f")]
                     UNSPEC_CVT_PS_PW))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "cvt.ps.pw\t%0,%1"
  [(set_attr "type" "fcvt")
   (set_attr "mode" "SF")])

; mulr.ps - Floating Point Reduction Multiply
(define_insn "mips_mulr_ps"
  [(set (match_operand:V2SF 0 "register_operand" "=f")
        (unspec:V2SF [(match_operand:V2SF 1 "register_operand" "f")
                      (match_operand:V2SF 2 "register_operand" "f")]
                     UNSPEC_MULR_PS))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "mulr.ps\t%0,%1,%2"
  [(set_attr "type" "fmul")
   (set_attr "mode" "SF")])

; abs.ps
(define_expand "mips_abs_ps"
  [(set (match_operand:V2SF 0 "register_operand")
        (unspec:V2SF [(match_operand:V2SF 1 "register_operand")]
                     UNSPEC_ABS_PS))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  /* If we can ignore NaNs, this operation is equivalent to the
     rtl ABS code.  */
  if (!HONOR_NANS (V2SFmode))
    {
      emit_insn (gen_absv2sf2 (operands[0], operands[1]));
      DONE;
    }
})

(define_insn "*mips_abs_ps"
  [(set (match_operand:V2SF 0 "register_operand" "=f")
        (unspec:V2SF [(match_operand:V2SF 1 "register_operand" "f")]
                     UNSPEC_ABS_PS))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  "abs.ps\t%0,%1"
  [(set_attr "type" "fabs")
   (set_attr "mode" "SF")])

;----------------------------------------------------------------------------
; Floating Point Comparisons for Scalars
;----------------------------------------------------------------------------

(define_insn "mips_cabs_cond_<fmt>"
  [(set (match_operand:CC 0 "register_operand" "=z")
        (unspec:CC [(match_operand:SCALARF 1 "register_operand" "f")
                    (match_operand:SCALARF 2 "register_operand" "f")
                    (match_operand 3 "const_int_operand" "")]
                   UNSPEC_CABS))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "cabs.%Y3.<fmt>\t%0,%1,%2"
  [(set_attr "type" "fcmp")
   (set_attr "mode" "FPSW")])


;----------------------------------------------------------------------------
; Floating Point Comparisons for Four Singles
;----------------------------------------------------------------------------

(define_insn_and_split "mips_c_cond_4s"
  [(set (match_operand:CCV4 0 "register_operand" "=z")
        (unspec:CCV4 [(match_operand:V2SF 1 "register_operand" "f")
                      (match_operand:V2SF 2 "register_operand" "f")
                      (match_operand:V2SF 3 "register_operand" "f")
                      (match_operand:V2SF 4 "register_operand" "f")
                      (match_operand 5 "const_int_operand" "")]
                     UNSPEC_C))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  "#"
  "&& reload_completed"
  [(set (match_dup 6)
        (unspec:CCV2 [(match_dup 1)
                      (match_dup 2)
                      (match_dup 5)]
                     UNSPEC_C))
   (set (match_dup 7)
        (unspec:CCV2 [(match_dup 3)
                      (match_dup 4)
                      (match_dup 5)]
                     UNSPEC_C))]
{
  operands[6] = simplify_gen_subreg (CCV2mode, operands[0], CCV4mode, 0);
  operands[7] = simplify_gen_subreg (CCV2mode, operands[0], CCV4mode, 8);
}
  [(set_attr "type" "fcmp")
   (set_attr "length" "8")
   (set_attr "mode" "FPSW")])

(define_insn_and_split "mips_cabs_cond_4s"
  [(set (match_operand:CCV4 0 "register_operand" "=z")
        (unspec:CCV4 [(match_operand:V2SF 1 "register_operand" "f")
                      (match_operand:V2SF 2 "register_operand" "f")
                      (match_operand:V2SF 3 "register_operand" "f")
                      (match_operand:V2SF 4 "register_operand" "f")
                      (match_operand 5 "const_int_operand" "")]
                     UNSPEC_CABS))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "#"
  "&& reload_completed"
  [(set (match_dup 6)
        (unspec:CCV2 [(match_dup 1)
                      (match_dup 2)
                      (match_dup 5)]
                     UNSPEC_CABS))
   (set (match_dup 7)
        (unspec:CCV2 [(match_dup 3)
                      (match_dup 4)
                      (match_dup 5)]
                     UNSPEC_CABS))]
{
  operands[6] = simplify_gen_subreg (CCV2mode, operands[0], CCV4mode, 0);
  operands[7] = simplify_gen_subreg (CCV2mode, operands[0], CCV4mode, 8);
}
  [(set_attr "type" "fcmp")
   (set_attr "length" "8")
   (set_attr "mode" "FPSW")])


;----------------------------------------------------------------------------
; Floating Point Comparisons for Paired Singles
;----------------------------------------------------------------------------

(define_insn "mips_c_cond_ps"
  [(set (match_operand:CCV2 0 "register_operand" "=z")
        (unspec:CCV2 [(match_operand:V2SF 1 "register_operand" "f")
                      (match_operand:V2SF 2 "register_operand" "f")
                      (match_operand 3 "const_int_operand" "")]
                     UNSPEC_C))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  "c.%Y3.ps\t%0,%1,%2"
  [(set_attr "type" "fcmp")
   (set_attr "mode" "FPSW")])

(define_insn "mips_cabs_cond_ps"
  [(set (match_operand:CCV2 0 "register_operand" "=z")
        (unspec:CCV2 [(match_operand:V2SF 1 "register_operand" "f")
                      (match_operand:V2SF 2 "register_operand" "f")
                      (match_operand 3 "const_int_operand" "")]
                     UNSPEC_CABS))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "cabs.%Y3.ps\t%0,%1,%2"
  [(set_attr "type" "fcmp")
   (set_attr "mode" "FPSW")])

;; An expander for generating an scc operation.
(define_expand "scc_ps"
  [(set (match_operand:CCV2 0)
        (unspec:CCV2 [(match_operand 1)] UNSPEC_SCC))])

(define_insn "s<code>_ps"
  [(set (match_operand:CCV2 0 "register_operand" "=z")
        (unspec:CCV2
           [(fcond (match_operand:V2SF 1 "register_operand" "f")
                   (match_operand:V2SF 2 "register_operand" "f"))]
           UNSPEC_SCC))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  "c.<fcond>.ps\t%0,%1,%2"
  [(set_attr "type" "fcmp")
   (set_attr "mode" "FPSW")])

(define_insn "s<code>_ps"
  [(set (match_operand:CCV2 0 "register_operand" "=z")
        (unspec:CCV2
           [(swapped_fcond (match_operand:V2SF 1 "register_operand" "f")
                           (match_operand:V2SF 2 "register_operand" "f"))]
           UNSPEC_SCC))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
  "c.<swapped_fcond>.ps\t%0,%2,%1"
  [(set_attr "type" "fcmp")
   (set_attr "mode" "FPSW")])

;----------------------------------------------------------------------------
; Floating Point Branch Instructions.
;----------------------------------------------------------------------------

; Branch on Any of Four Floating Point Condition Codes True
(define_insn "bc1any4t"
  [(set (pc)
        (if_then_else (ne (match_operand:CCV4 1 "register_operand" "z")
                          (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "%*bc1any4t\t%1,%0%/"
  [(set_attr "type" "branch")])

; Branch on Any of Four Floating Point Condition Codes False
(define_insn "bc1any4f"
  [(set (pc)
        (if_then_else (ne (match_operand:CCV4 1 "register_operand" "z")
                          (const_int -1))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "%*bc1any4f\t%1,%0%/"
  [(set_attr "type" "branch")])

; Branch on Any of Two Floating Point Condition Codes True
(define_insn "bc1any2t"
  [(set (pc)
        (if_then_else (ne (match_operand:CCV2 1 "register_operand" "z")
                          (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "%*bc1any2t\t%1,%0%/"
  [(set_attr "type" "branch")])

; Branch on Any of Two Floating Point Condition Codes False
(define_insn "bc1any2f"
  [(set (pc)
        (if_then_else (ne (match_operand:CCV2 1 "register_operand" "z")
                          (const_int -1))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "%*bc1any2f\t%1,%0%/"
  [(set_attr "type" "branch")])

; Used to access one register in a CCV2 pair.  Operand 0 is the register
; pair and operand 1 is the index of the register we want (a CONST_INT).
(define_expand "single_cc"
  [(ne (unspec:CC [(match_operand 0) (match_operand 1)] UNSPEC_SINGLE_CC)
       (const_int 0))])

; This is a normal floating-point branch pattern, but rather than check
; a single CCmode register, it checks one register in a CCV2 pair.
; Operand 2 is the register pair and operand 3 is the index of the
; register we want.
(define_insn "*branch_upper_lower"
  [(set (pc)
        (if_then_else
         (match_operator 1 "equality_operator"
            [(unspec:CC [(match_operand:CCV2 2 "register_operand" "z")
                         (match_operand 3 "const_int_operand")]
                        UNSPEC_SINGLE_CC)
             (const_int 0)])
         (label_ref (match_operand 0 "" ""))
         (pc)))]
  "TARGET_HARD_FLOAT"
{
  operands[2]
    = gen_rtx_REG (CCmode, REGNO (operands[2]) + INTVAL (operands[3]));
  return mips_output_conditional_branch (insn, operands,
                                         MIPS_BRANCH ("b%F1", "%2,%0"),
                                         MIPS_BRANCH ("b%W1", "%2,%0"));
}
  [(set_attr "type" "branch")])

; As above, but with the sense of the condition reversed.
(define_insn "*branch_upper_lower_inverted"
  [(set (pc)
        (if_then_else
         (match_operator 1 "equality_operator"
            [(unspec:CC [(match_operand:CCV2 2 "register_operand" "z")
                         (match_operand 3 "const_int_operand")]
                        UNSPEC_SINGLE_CC)
             (const_int 0)])
         (pc)
         (label_ref (match_operand 0 "" ""))))]
  "TARGET_HARD_FLOAT"
{
  operands[2]
    = gen_rtx_REG (CCmode, REGNO (operands[2]) + INTVAL (operands[3]));
  return mips_output_conditional_branch (insn, operands,
                                         MIPS_BRANCH ("b%W1", "%2,%0"),
                                         MIPS_BRANCH ("b%F1", "%2,%0"));
}
  [(set_attr "type" "branch")])

;----------------------------------------------------------------------------
; Floating Point Reduced Precision Reciprocal Square Root Instructions.
;----------------------------------------------------------------------------

(define_insn "mips_rsqrt1_<fmt>"
  [(set (match_operand:ANYF 0 "register_operand" "=f")
        (unspec:ANYF [(match_operand:ANYF 1 "register_operand" "f")]
                     UNSPEC_RSQRT1))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "rsqrt1.<fmt>\t%0,%1"
  [(set_attr "type" "frsqrt1")
   (set_attr "mode" "<UNITMODE>")])

(define_insn "mips_rsqrt2_<fmt>"
  [(set (match_operand:ANYF 0 "register_operand" "=f")
        (unspec:ANYF [(match_operand:ANYF 1 "register_operand" "f")
                      (match_operand:ANYF 2 "register_operand" "f")]
                     UNSPEC_RSQRT2))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "rsqrt2.<fmt>\t%0,%1,%2"
  [(set_attr "type" "frsqrt2")
   (set_attr "mode" "<UNITMODE>")])

(define_insn "mips_recip1_<fmt>"
  [(set (match_operand:ANYF 0 "register_operand" "=f")
        (unspec:ANYF [(match_operand:ANYF 1 "register_operand" "f")]
                     UNSPEC_RECIP1))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "recip1.<fmt>\t%0,%1"
  [(set_attr "type" "frdiv1")
   (set_attr "mode" "<UNITMODE>")])

(define_insn "mips_recip2_<fmt>"
  [(set (match_operand:ANYF 0 "register_operand" "=f")
        (unspec:ANYF [(match_operand:ANYF 1 "register_operand" "f")
                      (match_operand:ANYF 2 "register_operand" "f")]
                     UNSPEC_RECIP2))]
  "TARGET_HARD_FLOAT && TARGET_MIPS3D"
  "recip2.<fmt>\t%0,%1,%2"
  [(set_attr "type" "frdiv2")
   (set_attr "mode" "<UNITMODE>")])

(define_expand "vcondv2sfv2sf"
  [(set (match_operand:V2SF 0 "register_operand")
        (if_then_else:V2SF
          (match_operator 3 ""
            [(match_operand:V2SF 4 "register_operand")
             (match_operand:V2SF 5 "register_operand")])
          (match_operand:V2SF 1 "register_operand")
          (match_operand:V2SF 2 "register_operand")))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  mips_expand_vcondv2sf (operands[0], operands[1], operands[2],
                         GET_CODE (operands[3]), operands[4], operands[5]);
  DONE;
})

(define_expand "sminv2sf3"
  [(set (match_operand:V2SF 0 "register_operand")
        (smin:V2SF (match_operand:V2SF 1 "register_operand")
                   (match_operand:V2SF 2 "register_operand")))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  mips_expand_vcondv2sf (operands[0], operands[1], operands[2],
                         LE, operands[1], operands[2]);
  DONE;
})

(define_expand "smaxv2sf3"
  [(set (match_operand:V2SF 0 "register_operand")
        (smax:V2SF (match_operand:V2SF 1 "register_operand")
                   (match_operand:V2SF 2 "register_operand")))]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  mips_expand_vcondv2sf (operands[0], operands[1], operands[2],
                         LE, operands[2], operands[1]);
  DONE;
})

(define_expand "reduc_smin_v2sf"
  [(match_operand:V2SF 0 "register_operand")
   (match_operand:V2SF 1 "register_operand")]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  mips_expand_vec_reduc (operands[0], operands[1], gen_sminv2sf3);
  DONE;
})

(define_expand "reduc_smax_v2sf"
  [(match_operand:V2SF 0 "register_operand")
   (match_operand:V2SF 1 "register_operand")]
  "TARGET_HARD_FLOAT && TARGET_PAIRED_SINGLE_FLOAT"
{
  mips_expand_vec_reduc (operands[0], operands[1], gen_smaxv2sf3);
  DONE;
})