URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [picochip/] [picochip.md] - Rev 801
Go to most recent revision | Compare with Previous | Blame | View Log
;; GCC machine description for picochip;; Copyright (C) 2008, 2009, 2010 Free Software Foundation, Inc.;; Contributed by Picochip Ltd (http://www.picochip.com);; Maintained by Daniel Towner (dant@picochip.com) and Hariharan;; Sandanagobalane (hariharan@picochip.com);;;; This file is part of GCC.;;;; GCC is free software; you can redistribute it and/or modify;; it under the terms of the GNU General Public License as published by;; the Free Software Foundation; either version 3, or (at your option);; any later version.;;;; GCC is distributed in the hope that it will be useful,;; but WITHOUT ANY WARRANTY; without even the implied warranty of;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the;; GNU General Public License for more details.;;;; You should have received a copy of the GNU General Public License;; along with GCC; see the file COPYING3. If not, see;; <http://www.gnu.org/licenses/>.;; -------------------------------------------------------------------------;; In addition to the normal output operand formats, the following;; letter formats are also available:;;;; The following can be used for constants, or the constant part of a;; memory offset.;; Q - Output constant unaltered (byte mode).;; M - Alias for Q, which only works with memory operands.;; H - Divide constant by 2 (i.e., HImode is 2 bytes);; S - Divide constant by 4 (i.e., SImode is 4 bytes);;;; The following can be used for two part addresses (i.e., base +;; offset or base[offset]).;; o - Output offset only.;; b - Output base only.;;;; The following are used on SI registers and constants;; R - Output register pair (i.e., R[n:m]);; L - Output lower word/register;; U - Output upper word/register;;;; The following are used on DI mode registers.;; X - Output 3rd register;; Y - Output 4th register;;;; Miscellaneous;; | - Output VLIW separator;; r - Output register value of memory operand.;; I - Output an opcode (e.g., ADD for plus, LSL for lshift);; i - Output an opcode in symbolic notation (e.g., + for plus);; Define the length of an instruction. Used to allow different types;; of branches to be used for different branch offsets. Default to 6;; bytes, which is the longest possible single instruction.(define_attr "length" "" (const_int 6));; Define some constants which are used in conjuction with branch;; scheduling. Branches must be 10-bit signed, which equates to;; [-512,511]. However, to compensate for the lack of branch alignment;; these offsets are reduced by a factor of 2.(define_constants[(MIN_BRANCH_OFFSET -256)(MAX_BRANCH_OFFSET 255)(SHORT_BRANCH_LENGTH 6) ; The size of a schedulable short branch.(LONG_BRANCH_LENGTH 16) ; The size of an expanded JMP?? macro.]);; Define identifiers for various special instructions. These;; instructions may then be used in RTL expansions, or builtins.(define_constants[; Special instruction builtins.(UNSPEC_SBC 0) ; Sign-bit count(UNSPEC_ADDS 1) ; Saturating addition(UNSPEC_SUBS 2) ; Saturating subtraction(UNSPEC_BREV 3) ; Bit reversal; Special internal instructions (only used by compiler)(UNSPEC_COPYSW 5) ; Get status word(UNSPEC_ADDC 6) ; Add with carry.; Scalar port communication builtins(UNSPEC_PUT 7) ; Communication (put): port[op0] := op1(UNSPEC_GET 8) ; Communication (get): op0 := get_port[op1](UNSPEC_TESTPORT 9) ; Communication (test): op0 := testport[op1]; Array port communication builtins. These all take extra; arguments giving information about the array access being used.(UNSPEC_PUT_ARRAY 10) ; Array put(UNSPEC_GET_ARRAY 11) ; Array get(UNSPEC_TESTPORT_ARRAY 12) ; Array test port;; Array port expansions(UNSPEC_CALL_GET_ARRAY 13) ;(UNSPEC_CALL_PUT_ARRAY 14) ;(UNSPEC_CALL_TESTPORT_ARRAY 15) ;; Array port low-level fn calls(UNSPEC_CALL_GET_FN 16)(UNSPEC_CALL_TESTPORT_FN 17); Halt instruction.(UNSPEC_HALT 18); Internal TSTPORT instruction, used to generate a single TSTPORT; instruction for use in the testport branch split.(UNSPEC_INTERNAL_TESTPORT 19)]);; Register ID's(define_constants[(LINK_REGNUM 12) ; Function link register.(CC_REGNUM 17) ; Condition flags.(ACC_REGNUM 16) ; Condition flags.]);;============================================================================;; Predicates and constraints;;============================================================================(include "predicates.md")(include "constraints.md");;============================================================================;; First operand shifting patterns. These allow certain instructions;; (e.g., add, and, or, xor, sub) to apply a shift-by-constant to;; their first operand.;;;; Note that only the first operand is matched by the shift, to ensure;; that non-commutative instructions (like subtract) work;; properly. When a commutative instruction, with a shift in the;; second operand is found, the compiler will reorder the operands to;; match.;;============================================================================(define_insn "*firstOpGenericAshift"[(set (match_operand:HI 0 "register_operand" "=r")(match_operator:HI 1 "picochip_first_op_shift_operator"[(ashift:HI(match_operand:HI 2 "register_operand" "r")(match_operand:HI 3 "picochip_J_operand" "J"))(match_operand:HI 4 "picochip_register_or_immediate_operand" "ri")]))(clobber (reg:CC CC_REGNUM))]"""%I1.0 [LSL %2,%3],%4,%0\t// %0 := (%2 << %3) %i1 %4"[(set_attr "type" "picoAlu");; A long constant must be used if the operator instruction doesn't;; accept immediates, or if the constant is too big to fit the;; immediate. Note that the following condition is written in the;; way which uses the least number of predicates.(set (attr "longConstant")(cond [(ior (match_operand 4 "register_operand")(and (match_operand 1 "picochip_first_op_shift_operator_imm")(match_operand 1 "picochip_J_operand")))(const_string "false")](const_string "true")))]);; During combine, ashift gets converted into a multiply, necessitating the following pattern.;; Note that we do a log_2(imm) to get the actual LSL operand.(define_insn "*firstOpGenericAshift"[(set (match_operand:HI 0 "register_operand" "=r")(match_operator:HI 1 "picochip_first_op_shift_operator"[(mult:HI(match_operand:HI 2 "register_operand" "r")(match_operand:HI 3 "power_of_2_imm_operand" "n"))(match_operand:HI 4 "picochip_register_or_immediate_operand" "ri")]))(clobber (reg:CC CC_REGNUM))]"""%I1.0 [LSL %2,%P3],%4,%0\t// %0 := (%2 << %3) %i1 %4"[(set_attr "type" "picoAlu");; A long constant must be used if the operator instruction doesn't;; accept immediates, or if the constant is too big to fit the;; immediate. Note that the following condition is written in the;; way which uses the least number of predicates.(set (attr "longConstant")(cond [(ior (match_operand 4 "register_operand")(and (match_operand 1 "picochip_first_op_shift_operator_imm")(match_operand 1 "picochip_J_operand")))(const_string "false")](const_string "true")))])(define_insn "*firstOpGenericAshiftrt"[(set (match_operand:HI 0 "register_operand" "=r")(match_operator:HI 1 "picochip_first_op_shift_operator"[(ashiftrt:HI(match_operand:HI 2 "register_operand" "r")(match_operand:HI 3 "picochip_J_operand" "J"))(match_operand:HI 4 "picochip_register_or_immediate_operand" "ri")]))(clobber (reg:CC CC_REGNUM))]"""%I1.0 [ASR %2,%3],%4,%0\t// %0 := (%2 >>{arith} %3) %i1 %4"[(set_attr "type" "picoAlu");; A long constant must be used if the operator instruction doesn't;; accept immediates, or if the constant is too big to fit the;; immediate. Note that the following condition is written in the;; way which uses the least number of predicates.(set (attr "longConstant")(cond [(ior (match_operand 4 "register_operand")(and (match_operand 1 "picochip_first_op_shift_operator_imm")(match_operand 1 "picochip_J_operand")))(const_string "false")](const_string "true")))])(define_insn "*firstOpGenericLshiftrt"[(set (match_operand:HI 0 "register_operand" "=r")(match_operator:HI 1 "picochip_first_op_shift_operator"[(lshiftrt:HI(match_operand:HI 2 "register_operand" "r")(match_operand:HI 3 "picochip_J_operand" "J"))(match_operand:HI 4 "picochip_register_or_immediate_operand" "ri")]))(clobber (reg:CC CC_REGNUM))]"""%I1.0 [LSR %2,%3],%4,%0\t// %0 := (%2 >> %3) %i1 %4"[(set_attr "type" "picoAlu");; A long constant must be used if the operator instruction doesn't;; accept immediates, or if the constant is too big to fit the;; immediate. Note that the following condition is written in the;; way which uses the least number of predicates.(set (attr "longConstant")(cond [(ior (match_operand 4 "register_operand")(and (match_operand 1 "picochip_first_op_shift_operator_imm")(match_operand 1 "picochip_J_operand")))(const_string "false")](const_string "true")))]);;===========================================================================;; Jump instructions.;;===========================================================================(define_insn "indirect_jump"[(set (pc) (match_operand:HI 0 "register_operand" "r"))]"""JR (%0)\t// Indirect_jump to %0 %>"[(set_attr "type" "realBranch")(set_attr "length" "3")])(define_insn "jump"[(set (pc)(label_ref (match_operand 0 "" "")))]"""* return picochip_output_jump(insn);"[(set (attr "length")(if_then_else(and (ge (minus (match_dup 0) (pc)) (const_int MIN_BRANCH_OFFSET))(le (minus (match_dup 0) (pc)) (const_int MAX_BRANCH_OFFSET)))(const_int SHORT_BRANCH_LENGTH)(const_int LONG_BRANCH_LENGTH)))(set (attr "type")(if_then_else(eq_attr "length" "6")(const_string "realBranch")(const_string "unknown")))])(define_insn "*fn_return"[(return)(use (reg:HI LINK_REGNUM))]"""JR (R12)\t// Return to caller %>"[(set_attr "length" "2")(set_attr "type" "realBranch")(set_attr "longConstant" "false")]);; Peephole either 2 LDWs or STWs into LDL/STL.(define_peephole2[(set (match_operand:HI 0 "register_operand" "")(match_operand:HI 1 "memory_operand" ""))(set (match_operand:HI 2 "register_operand" "")(match_operand:HI 3 "memory_operand" ""))]"ok_to_peephole_ldw(operands[0],operands[1],operands[2],operands[3])"[(set (match_dup 4) (match_dup 5))]"{operands[4] = gen_min_reg(operands[0],operands[2]);operands[5] = gen_SImode_mem(operands[1],operands[3]);}")(define_peephole2[(set (match_operand:HI 0 "memory_operand" "")(match_operand:HI 1 "register_operand" ""))(set (match_operand:HI 2 "memory_operand" "")(match_operand:HI 3 "register_operand" ""))]"ok_to_peephole_stw(operands[0],operands[1],operands[2],operands[3])"[(set (match_dup 4) (match_dup 5))]"{operands[4] = gen_SImode_mem(operands[0],operands[2]);operands[5] = gen_min_reg(operands[1],operands[3]);}");; We have instructions like add,subtract,ior,and that set condition;; codes if they are executed on slot 0. If we have;; add a = b + c;; if (a!=0);; {};; We would have RTL sequence like;; add.# rb,rc,ra # will be replaced by slot no, after scheduling;; sub.0 ra,0,r15;; bnz;; Instead, we can just do;; add.0 rb,rc,ra;; bnz(define_peephole2[(parallel [(set (match_operand:HI 0 "register_operand" "")(plus:HI (match_operand:HI 1 "register_operand" "")(match_operand:HI 2 "general_operand" "")))(clobber (reg:CC CC_REGNUM))])(parallel [(set (pc)(if_then_else(match_operator:CC 3 "picochip_peephole_comparison_operator"[(match_dup 0) (const_int 0)])(label_ref (match_operand 6 "" ""))(pc)))(clobber (reg:CC CC_REGNUM))])]""[(parallel [(set (match_dup 0)(plus:HI (match_dup 1) (match_dup 2)))(set (reg:CC CC_REGNUM)(match_op_dup 3 [(const_int 0) (const_int 0)]))])(parallel [(set (pc)(if_then_else(match_op_dup:HI 3 [(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_dup 6))(pc)))(use (match_dup 7))])]"{operands[7] = GEN_INT(0);}")(define_peephole2[(parallel [(set (match_operand:HI 0 "register_operand" "")(plus:HI (match_operand:HI 1 "register_operand" "")(match_operand:HI 2 "general_operand" "")))(clobber (reg:CC CC_REGNUM))])(set (reg:CC CC_REGNUM)(match_operator:CC 3 "picochip_peephole_comparison_operator"[(match_dup 0) (const_int 0)]))(parallel [(set (pc)(if_then_else(match_operator 4 "comparison_operator"[(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_operand 5 "" ""))(pc)))(use (match_operand:HI 6 "const_int_operand" ""))])]""[(parallel [(set (match_dup 0)(plus:HI (match_dup 1) (match_dup 2)))(set (reg:CC CC_REGNUM)(match_op_dup 3 [(const_int 0) (const_int 0)]))])(parallel [(set (pc)(if_then_else (match_op_dup:HI 4 [(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_dup 5))(pc)))(use (match_dup 6))])]"{operands[7] = GEN_INT(0);}");; If peephole happens before the cbranch split(define_peephole2[(parallel [(set (match_operand:HI 0 "register_operand" "")(minus:HI (match_operand:HI 1 "general_operand" "")(match_operand:HI 2 "register_operand" "")))(clobber (reg:CC CC_REGNUM))])(parallel [(set (pc)(if_then_else(match_operator:CC 3 "picochip_peephole_comparison_operator"[(match_dup 0) (const_int 0)])(label_ref (match_operand 6 "" ""))(pc)))(clobber (reg:CC CC_REGNUM))])]""[(parallel [(set (match_dup 0)(minus:HI (match_dup 1) (match_dup 2)))(set (reg:CC CC_REGNUM)(match_op_dup 3 [(const_int 0) (const_int 0)]))])(parallel [(set (pc)(if_then_else(match_op_dup:HI 3 [(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_dup 6))(pc)))(use (match_dup 7))])]"{operands[7] = GEN_INT(0);}");; If peephole happens after the cbranch split(define_peephole2[(parallel [(set (match_operand:HI 0 "register_operand" "")(minus:HI (match_operand:HI 1 "general_operand" "")(match_operand:HI 2 "register_operand" "")))(clobber (reg:CC CC_REGNUM))])(set (reg:CC CC_REGNUM)(match_operator:CC 3 "picochip_peephole_comparison_operator"[(match_dup 0) (const_int 0)]))(parallel [(set (pc)(if_then_else(match_operator 4 "comparison_operator"[(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_operand 5 "" ""))(pc)))(use (match_operand:HI 6 "const_int_operand" ""))])]""[(parallel [(set (match_dup 0)(minus:HI (match_dup 1) (match_dup 2)))(set (reg:CC CC_REGNUM)(match_op_dup 3 [(const_int 0) (const_int 0)]))])(parallel [(set (pc)(if_then_else (match_op_dup:HI 4 [(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_dup 5))(pc)))(use (match_dup 6))])]"{operands[7] = GEN_INT(0);}");; If peephole happens before the cbranch split(define_peephole2[(parallel[(set (match_operand:HI 0 "register_operand" "")(and:HI (match_operand:HI 1 "register_operand" "")(match_operand:HI 2 "general_operand" "")))(clobber (reg:CC CC_REGNUM))])(parallel [(set (pc)(if_then_else(match_operator:CC 3 "picochip_peephole_comparison_operator"[(match_dup 0) (const_int 0)])(label_ref (match_operand 6 "" ""))(pc)))(clobber (reg:CC CC_REGNUM))])]""[(parallel [(set (match_dup 0)(and:HI (match_dup 1) (match_dup 2)))(set (reg:CC CC_REGNUM)(match_op_dup 3 [(const_int 0) (const_int 0)]))])(parallel [(set (pc)(if_then_else(match_op_dup:HI 3 [(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_dup 6))(pc)))(use (match_dup 7))])]"{operands[7] = GEN_INT(0);}")(define_peephole2[(parallel[(set (match_operand:HI 0 "register_operand" "")(and:HI (match_operand:HI 1 "register_operand" "")(match_operand:HI 2 "general_operand" "")))(clobber (reg:CC CC_REGNUM))])(set (reg:CC CC_REGNUM)(match_operator:CC 3 "picochip_peephole_comparison_operator"[(match_dup 0) (const_int 0)]))(parallel [(set (pc)(if_then_else(match_operator 4 "comparison_operator"[(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_operand 5 "" ""))(pc)))(use (match_operand:HI 6 "const_int_operand" ""))])]""[(parallel [(set (match_dup 0)(and:HI (match_dup 1) (match_dup 2)))(set (reg:CC CC_REGNUM)(match_op_dup 3 [(const_int 0) (const_int 0)]))])(parallel [(set (pc)(if_then_else (match_op_dup:HI 4 [(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_dup 5))(pc)))(use (match_dup 6))])]"{operands[7] = GEN_INT(0);}");; If peephole happens before the cbranch split(define_peephole2[(parallel[(set (match_operand:HI 0 "register_operand" "")(ior:HI (match_operand:HI 1 "register_operand" "")(match_operand:HI 2 "general_operand" "")))(clobber (reg:CC CC_REGNUM))])(parallel [(set (pc)(if_then_else(match_operator:CC 3 "picochip_peephole_comparison_operator"[(match_dup 0) (const_int 0)])(label_ref (match_operand 6 "" ""))(pc)))(clobber (reg:CC CC_REGNUM))])]""[(parallel [(set (match_dup 0)(ior:HI (match_dup 1) (match_dup 2)))(set (reg:CC CC_REGNUM)(match_op_dup 3 [(const_int 0) (const_int 0)]))])(parallel [(set (pc)(if_then_else(match_op_dup:HI 3 [(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_dup 6))(pc)))(use (match_dup 7))])]"{operands[7] = GEN_INT(0);}")(define_peephole2[(parallel[(set (match_operand:HI 0 "register_operand" "")(ior:HI (match_operand:HI 1 "register_operand" "")(match_operand:HI 2 "general_operand" "")))(clobber (reg:CC CC_REGNUM))])(set (reg:CC CC_REGNUM)(match_operator:CC 3 "picochip_peephole_comparison_operator"[(match_dup 0) (const_int 0)]))(parallel [(set (pc)(if_then_else(match_operator 4 "comparison_operator"[(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_operand 5 "" ""))(pc)))(use (match_operand:HI 6 "const_int_operand" ""))])]""[(parallel [(set (match_dup 0)(ior:HI (match_dup 1) (match_dup 2)))(set (reg:CC CC_REGNUM)(match_op_dup 3 [(const_int 0) (const_int 0)]))])(parallel [(set (pc)(if_then_else (match_op_dup:HI 4 [(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_dup 5))(pc)))(use (match_dup 6))])]"{operands[7] = GEN_INT(0);}");; Conditional branch (HI). This is split into separate compare and;; branch instructions if scheduling is enabled. The branch;; instruction is supplied with the type of comparison on which the;; branch should occur.(define_insn_and_split "cbranchhi4"[(set (pc)(if_then_else(match_operator 0 "ordered_comparison_operator"[(match_operand:HI 1 "register_operand" "r")(match_operand:HI 2 "picochip_comparison_operand" "ri")])(label_ref (match_operand 3 "" ""))(pc)))(clobber (reg:CC CC_REGNUM))]"""* return picochip_output_cbranch(operands);""reload_completed&& (picochip_schedule_type != DFA_TYPE_NONE || flag_delayed_branch)"[(const_int 0)]"{rtx const_int_opnd;const_int_opnd = GEN_INT(GET_CODE(operands[0]));if (picochip_supported_comparison_operator (operands[0], HImode))emit_insn (gen_supported_compare (operands[0], operands[1], operands[2]));elseemit_insn (gen_compare (operands[0], operands[1], operands[2]));emit_jump_insn (gen_branch (operands[3], const_int_opnd, operands[0]));}");; The only difference between this and the next pattern is that the next pattern;; might introduce subtracts whose first operand is a constant. This would have to;; be a longConstant. But, we know that such a situation wouldnt arise for supported;; comparison operator and hence this pattern assumes that the second constraint combo;; would still generate a normal instruction.(define_insn "supported_compare"[(set (reg:CC CC_REGNUM)(match_operator:CC 0 "picochip_supported_comparison_operator"[(match_operand:HI 1 "register_operand" "r,r,r")(match_operand:HI 2 "picochip_comparison_operand" "r,J,i")]))]"""* return picochip_output_compare(operands);"[; Must be picoAlu because it sets the condition flags.(set_attr "type" "picoAlu,picoAlu,picoAlu")(set_attr "longConstant" "false,false,true")(set_attr "length" "2,2,4")]);; This pattern was added to match the previous pattern. When doing if-convert;; the pattern generated using movhicc does not have a eq:CC but only a eq for;; operator. If this pattern were not to be there, Gcc decides not to use;; movhicc at all. Whereas, in Gcc 4.4, it seems to be cleverer.(define_insn "*supported_compare1"[(set (reg:CC CC_REGNUM)(match_operator 0 "picochip_supported_comparison_operator"[(match_operand:HI 1 "register_operand" "r,r,r")(match_operand:HI 2 "picochip_comparison_operand" "r,J,i")]))]"""* return picochip_output_compare(operands);"[; Must be picoAlu because it sets the condition flags.(set_attr "type" "picoAlu,picoAlu,picoAlu")(set_attr "longConstant" "false,false,true")(set_attr "length" "2,2,4")])(define_insn "compare"[(set (reg:CC CC_REGNUM)(match_operator:CC 0 "comparison_operator"[(match_operand:HI 1 "register_operand" "r,r,r")(match_operand:HI 2 "picochip_comparison_operand" "r,M,i")]))]"""* return picochip_output_compare(operands);"[; Must be picoAlu because it sets the condition flags.(set_attr "type" "picoAlu,picoAlu,picoAlu")(set_attr "longConstant" "false,true,true")(set_attr "length" "2,4,4")]); Match a branch instruction, created from a tstport/cbranch split.; We use a "use" clause so GCC doesnt try to use this pattern generally.(define_insn "branch"[(set (pc)(if_then_else(match_operator 2 "comparison_operator"[(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_operand 0 "" ""))(pc)))(use (match_operand:HI 1 "const_int_operand" ""))]"""* return picochip_output_branch(operands, insn);"[(set (attr "length")(if_then_else(and (ge (minus (match_dup 0) (pc)) (const_int MIN_BRANCH_OFFSET))(le (minus (match_dup 0) (pc)) (const_int MAX_BRANCH_OFFSET)))(const_int SHORT_BRANCH_LENGTH)(const_int LONG_BRANCH_LENGTH)))(set (attr "type")(if_then_else(eq_attr "length" "6")(const_string "realBranch")(const_string "unknown")))]);; If a movqi is used which accesses memory on a machine which doesn't;; have byte addressing, synthesise the instruction using word load/store;; operations. The movqi's that are required during reload phase are;; handled using reload_inqi/reload_outqi.(define_expand "movqi"[(set (match_operand:QI 0 "nonimmediate_operand" "")(match_operand:QI 1 "general_operand" ""))]""{if (!reload_completed &&!TARGET_HAS_BYTE_ACCESS &&(MEM == GET_CODE(operands[0]) || MEM == GET_CODE(operands[1]))){rtx address;rtx wordAddress;rtx const1;rtx shiftVal;rtx loadedValue;rtx addressMask;rtx topByteValue;rtx signExtendedValue;warn_of_byte_access();/* Load the constant 1 into a register. */const1 = gen_reg_rtx(HImode);emit_insn(gen_rtx_SET(HImode, const1, GEN_INT(1)));/* Load the address mask with the bitwise complement of 1. */addressMask = gen_reg_rtx(HImode);emit_insn(gen_rtx_SET(HImode, addressMask, GEN_INT(-2)));/* Handle loads first, in case we are dealing with a mem := mem* instruction. */if (MEM == GET_CODE(operands[1])){/* Loads work as follows. The entire word containing the desired byte* is loaded. The bottom bit of the address indicates which* byte is required. The desired byte is moved into the most* significant byte, and then an arithmetic shift right* invoked to achieve sign extension. The desired byte is* moved to the MSB by XOR'ing the bottom address bit by 1,* multiplying the result by 8, and then shifting left by* that amount. Note that shifts only operate on the bottom* 4-bits of the source offset, so although the XOR may* produce a value which has its upper bits set, only bit 4* (i.e., the inverted, shifted bottom address bit) actually* gets used.*//* Ensure the address is in a register. */address = gen_reg_rtx(HImode);emit_insn(gen_rtx_SET(HImode, address, XEXP(operands[1], 0)));/* Compute the word address by masking out the bottom bit. */wordAddress = gen_reg_rtx(HImode);emit_insn(gen_andhi3(wordAddress, address, addressMask));/* Compute the shift value. This is the bottom address bit,* inverted, and multiplied by 8. */shiftVal = gen_reg_rtx(HImode);emit_insn(gen_xorhi3(shiftVal, address, const1));emit_insn(gen_ashlhi3(shiftVal, shiftVal, GEN_INT(3)));/* Emit the memory load. */loadedValue = gen_reg_rtx(HImode);emit_insn(gen_rtx_SET(HImode, loadedValue, gen_rtx_MEM(HImode, wordAddress)));/* Shift the desired byte to the most significant byte. */topByteValue = gen_reg_rtx (HImode);emit_insn (gen_ashlhi3 (topByteValue, loadedValue, shiftVal));/* Sign extend the top-byte back into the bottom byte. */signExtendedValue = gen_reg_rtx(HImode);emit_insn(gen_ashrhi3(signExtendedValue, topByteValue, GEN_INT(8)));/* Final extraction of QI mode register. */operands[1] = gen_rtx_SUBREG(QImode, signExtendedValue, 0);}if (MEM == GET_CODE(operands[0]) && GET_CODE(operands[1]) != MEM){rtx zeroingByteMask;rtx temp;rtx tempHiMode;rtx lsbByteMask;/* Get the address. */address = gen_reg_rtx(HImode);emit_insn(gen_rtx_SET(HImode, address, XEXP(operands[0], 0)));/* Compute the word aligned address. */wordAddress = gen_reg_rtx(HImode);emit_insn(gen_andhi3(wordAddress, address, addressMask));/* Compute the shift value. */shiftVal = gen_reg_rtx(HImode);emit_insn(gen_andhi3(shiftVal, address, const1));emit_insn(gen_ashlhi3(shiftVal, shiftVal, GEN_INT(3)));/* Emit the memory load. */loadedValue = gen_reg_rtx(HImode);emit_insn(gen_rtx_SET(HImode, loadedValue, gen_rtx_MEM(HImode, wordAddress)));/* Zero out the destination bits by AND'ing with 0xFF00* shifted appropriately. */zeroingByteMask = gen_reg_rtx(HImode);emit_insn(gen_rtx_SET(HImode, zeroingByteMask, GEN_INT(-256)));emit_insn(gen_lshrhi3(zeroingByteMask, zeroingByteMask, shiftVal));emit_insn(gen_andhi3(loadedValue, loadedValue, zeroingByteMask));/* Grab the incoming QI register, and ensure that the top bits* are zeroed out. This is because the register may be* storing a signed value, in which case the top-bits will be* sign bits. These must be removed to ensure that the* read-modify-write (which uses an OR) doesn't pick up those* bits, instead of the original memory value which is being* modified.*/tempHiMode = simplify_gen_subreg(HImode, operands[1], QImode, 0);temp = gen_reg_rtx(HImode);emit_insn(gen_rtx_SET(HImode, temp, tempHiMode));lsbByteMask = gen_reg_rtx (HImode);emit_insn (gen_rtx_SET (HImode, lsbByteMask, GEN_INT (0xFF)));emit_insn (gen_andhi3 (temp, temp, lsbByteMask));/* Shift the incoming byte value by the appropriate amount,* and OR into the load value. */emit_insn(gen_ashlhi3(temp, temp, shiftVal));emit_insn(gen_iorhi3(loadedValue, loadedValue, temp));/* Rewrite the original assignment, to assign the new value* to the word address. */operands[0] = gen_rtx_MEM(HImode, wordAddress);operands[1] = loadedValue;}}})(define_insn "*movqi_sign_extend"[(set (match_operand:HI 0 "register_operand" "=r,r")(sign_extend:HI (match_operand:QI 1 "memory_operand" "a,m")))]"TARGET_HAS_BYTE_ACCESS""@LDB (%a1),%0\t\t// %0 = Mem(%a1)LDB %a1,%0\t\t// %0 = Mem(%M1{byte})"[(set_attr "type" "mem,mem")(set_attr "longConstant" "true,false")(set_attr "length" "4,4")]);; movqi instructions for machines with and without byte access.(define_insn "*movqi_byte"[(set (match_operand:QI 0 "nonimmediate_operand" "=r,r,r,r,r,a,m")(match_operand:QI 1 "general_operand" "r,a,m,I,i,r,r"))]"TARGET_HAS_BYTE_ACCESS""@COPY.%# %1, %0\t// %0 := %1LDB (%a1),%0\t\t// %0 = Mem(%a1)LDB %a1,%0\t\t// %0 = Mem(%M1{byte})COPY.%# %1,%0\t\t// %0 := #%1 (QI) (short constant)COPY.%# %1,%0\t\t// %0 := #%1 (QI) (long constant)STB %1,(%a0)\t\t// Mem(%a0) := %1STB %1,%a0\t\t// Mem(%M0{byte}) := %1"[(set_attr "type" "basicAlu,mem,mem,basicAlu,basicAlu,mem,mem")(set_attr "longConstant" "false,true,false,false,true,true,false")(set_attr "length" "2,4,4,2,4,4,4")]);; Machines which don't have byte access can copy registers, and load;; constants, but can't access memory. The define_expand for movqi;; should already have rewritten memory accesses using word;; operations. The exception is qi reloads, which are handled using;; the reload_? patterns.(define_insn "*movqi_nobyte"[(set (match_operand:QI 0 "register_operand" "=r,r")(match_operand:QI 1 "picochip_register_or_immediate_operand" "r,i"))]"!TARGET_HAS_BYTE_ACCESS""@COPY.%# %1,%0\t// %0 := %1COPY.%# %1,%0\t\t// %0 := #%1 (QI)")(define_insn "movhi"[(set (match_operand:HI 0 "nonimmediate_operand" "=r,r,r,a,m,r,r")(match_operand:HI 1 "general_operand" "r,a,m,r,r,I,i"))]"""@COPY.%# %1,%0\t\t// %0 := %1LDW (%a1),%0\t\t// %0 := Mem(%a1)LDW %a1,%0\t\t// %0 = Mem(%M1{byte})STW %1,(%a0)\t\t// Mem(%a0) := %1STW %1,%a0\t\t// Mem(%M0{byte}) := %1COPY.%# %1,%0\t// %0 := %1 (short constant)COPY.%# %1,%0\t// %0 := %1 (long constant)"[(set_attr "type" "basicAlu,mem,mem,mem,mem,basicAlu,basicAlu")(set_attr "longConstant" "false,true,false,true,false,false,true")(set_attr "length" "2,4,4,4,4,2,4")])(define_insn "movsi"[(set (match_operand:SI 0 "nonimmediate_operand" "=r,r,r,r,a,m")(match_operand:SI 1 "general_operand" "r,a,m,i,r,r"))]"""@// %R0 := %R1 (SI)\n\tCOPY.%# %L1,%L0 %| COPY.1 %U1,%U0LDL (%a1),%R0\t\t// %R0 = Mem(%a1)LDL %a1,%R0\t\t// %R0 = Mem(%M1{byte})// %R0 := #%1 (SI)\n\tCOPY.%# %L1,%L0 %| COPY.%# %U1,%U0STL %R1,(%a0)\t\t// Mem(%a0) := %R1STL %R1,%a0\t\t// Mem(%M0{byte}) := %R1"[(set_attr "type" "unknown,mem,mem,unknown,mem,mem")(set_attr "longConstant" "false,true,false,true,false,false")(set_attr "length" "4,4,4,6,4,4")]); Split an SI mode register copy into separate HI mode copies, which; can be VLIW'd with other instructions. Only split the instruction; when VLIW scheduling is enabled. Splitting the instruction saves; some code space.;; This is predicated in reload_completed. This ensures that the; instructions aren't broken up too early which can result in the; SImode code being converted into inefficient HI mode code.(define_split[(set (match_operand:SI 0 "register_operand" "")(match_operand:SI 1 "register_operand" ""))]"reload_completed && picochip_schedule_type == DFA_TYPE_SPEED"[(set (match_dup 2) (match_dup 3))(set (match_dup 4) (match_dup 5))]"{operands[2] = gen_lowpart (HImode, operands[0]);operands[3] = gen_lowpart (HImode, operands[1]);operands[4] = gen_highpart (HImode, operands[0]);operands[5] = gen_highpart (HImode, operands[1]);}"); SI Mode split for load constant.(define_split[(set (match_operand:SI 0 "register_operand" "")(match_operand:SI 1 "const_int_operand" ""))]"reload_completed"[(set (match_dup 2) (match_dup 3))(set (match_dup 4) (match_dup 5))]"{operands[2] = gen_lowpart (HImode, operands[0]);operands[3] = picochip_get_low_const(operands[1]);operands[4] = gen_highpart (HImode, operands[0]);operands[5] = picochip_get_high_const(operands[1]);}")(define_insn "movsf"[(set (match_operand:SF 0 "nonimmediate_operand" "=r,r,r,m")(match_operand:SF 1 "general_operand" "r,m,i,r"))]"""@// %R0 := %R1 (SF)\n\tCOPY.%# %L1,%L0 %| COPY.1 %U1,%U0LDL %a1,%R0\t\t// %R0 :={SF} Mem(%M1{byte})// %R0 := #%1 (SF)\n\tCOPY.%# %L1,%L0\n\tCOPY.%# %U1,%U0STL %R1,%a0\t\t// Mem(%M0{byte}) :={SF} %R1");; memcpy pattern;; 0 = destination (mem:BLK ...);; 1 = source (mem:BLK ...);; 2 = count;; 3 = alignment(define_expand "movmemhi"[(match_operand 0 "memory_operand" "")(match_operand 1 "memory_operand" "")(match_operand:HI 2 "immediate_operand" "")(match_operand 3 "" "")]"picochip_schedule_type != DFA_TYPE_NONE""if (picochip_expand_movmemhi(operands)) DONE; FAIL;");;===========================================================================;; NOP;;===========================================================================;; No-operation (NOP)(define_insn "nop"[(const_int 0)]"""NOP\t// nop"[(set_attr "length" "1")]);;===========================================================================;; Function Calls. Define expands are used to ensure that the correct;; type of pattern is emitted, and then the define_insn's match the;; pattern using the correct types.;;;; Note: The comments output as part of these instructions are detected by;; the linker. Don't change the comments!;;===========================================================================(define_expand "call"[(parallel [(call (match_operand:QI 0 "memory_operand" "")(match_operand 1 "const_int_operand" ""))(clobber (reg:HI LINK_REGNUM))])]"""")(define_insn "call_for_divmod"[(call (match_operand:QI 0 "memory_operand" "")(match_operand 1 "const_int_operand" ""))]"""JL (%M0)\t// fn_call %M0%>"[(set_attr "length" "4")(set_attr "type" "realBranch")(set_attr "longConstant" "true")])(define_insn "*call_using_symbol"[(call (mem:QI (match_operand:HI 0 "immediate_operand" "i"))(match_operand 1 "const_int_operand" ""))(clobber (reg:HI LINK_REGNUM))]"""JL (%M0)\t// fn_call %M0%>"[(set_attr "length" "4")(set_attr "type" "realBranch")(set_attr "longConstant" "true")])(define_insn "*call_using_register"[(call (mem:QI (match_operand:HI 0 "register_operand" "r"))(match_operand 1 "const_int_operand" ""))(clobber (reg:HI LINK_REGNUM))]"""JL (%r0)\t// fn_call_unknown %r0%>"[(set_attr "length" "2")(set_attr "type" "realBranch")(set_attr "longConstant" "false")])(define_expand "call_value"[(parallel [(set (match_operand:HI 0 "" "")(call:HI (match_operand:QI 1 "memory_operand" "g")(match_operand 2 "const_int_operand" "")))(clobber (reg:HI LINK_REGNUM))])]"""")(define_insn "*call_value_using_symbol"[(set (match_operand:HI 0 "" "")(call:HI (mem:QI (match_operand:HI 1 "immediate_operand" "i"))(match_operand 2 "const_int_operand" "")))(clobber (reg:HI LINK_REGNUM))]"""JL (%M1)\t// fn_call %M1 (value return)%>"[(set_attr "length" "4")(set_attr "type" "realBranch")(set_attr "longConstant" "true")])(define_insn "*call_value_using_register"[(set (match_operand:HI 0 "" "")(call:HI (mem:QI (match_operand:HI 1 "register_operand" "r"))(match_operand 2 "const_int_operand" "")))(clobber (reg:HI LINK_REGNUM))]"""JL (%r1)// fn_call_unknown %r1 (value return)%>"[(set_attr "length" "2")(set_attr "type" "realBranch")(set_attr "longConstant" "false")]);;===========================================================================;; Addition;;===========================================================================;; Note that the addition of a negative value is transformed into the;; subtraction of a positive value, so that the add/sub immediate slot;; can make better use of the 4-bit range.(define_insn "addhi3"[(set (match_operand:HI 0 "register_operand" "=r,r,r,r")(plus:HI (match_operand:HI 1 "register_operand" "r,r,r,r")(match_operand:HI 2 "general_operand" "r,M,n,i")))(clobber (reg:CC CC_REGNUM))]""{ if (CONST_INT == GET_CODE(operands[2]) &&INTVAL(operands[2]) > -16 &&INTVAL(operands[2]) < 0)return "SUB.%# %1,-(%2),%0\t// %0 := %1 + %2 (HI)";elsereturn "ADD.%# %1,%2,%0\t// %0 := %1 + %2 (HI)";}[(set_attr "type" "basicAlu,basicAlu,basicAlu,basicAlu")(set_attr "longConstant" "false,false,true,true")(set_attr "length" "2,2,4,4")]);; If we peepholed the compare instruction out, we need to make sure the add;; goes in slot 0. This pattern is just to accomplish that.(define_insn "addhi3_with_use_clause"[(set (match_operand:HI 0 "register_operand" "=r,r,r,r")(plus:HI (match_operand:HI 1 "register_operand" "r,r,r,r")(match_operand:HI 2 "general_operand" "r,M,n,i")))(set (reg:CC CC_REGNUM)(match_operator:CC 3 "picochip_peephole_comparison_operator"[(const_int 0)(const_int 0)]))]""{ if (CONST_INT == GET_CODE(operands[2]) &&INTVAL(operands[2]) > -16 &&INTVAL(operands[2]) < 0)return "SUB.0 %1,-(%2),%0\t// %0 := %1 + %2 (HI)";elsereturn "ADD.0 %1,%2,%0\t// %0 := %1 + %2 (HI)";}[(set_attr "type" "picoAlu,picoAlu,picoAlu,picoAlu")(set_attr "longConstant" "false,false,true,true")(set_attr "length" "2,2,4,4")]);; Match an addition in which the first operand has been shifted;; (e.g., the comms array functions can emit such instructions).(define_insn "*addWith1stOpShift"[(set (match_operand:HI 0 "register_operand" "=r,r")(plus:HI (ashift:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2 "const_int_operand" ""))(match_operand:HI 3 "immediate_operand" "I,i")))(clobber (reg:CC CC_REGNUM))]"""ADD.0 [LSL %1,%2],%3,%0\t// %0 := (%1 << %2) + %3"[(set_attr "type" "picoAlu,picoAlu")(set_attr "longConstant" "false,true")])(define_insn_and_split "addsi3"[(set (match_operand:SI 0 "register_operand" "=r,r")(plus:SI (match_operand:SI 1 "register_operand" "r,r")(match_operand:SI 2 "general_operand" "r,i")))(clobber (reg:CC CC_REGNUM))]"""// %0 := %1 + %2 (SI)\n\tADD.0 %L1,%L2,%L0\n\tADDC.0 %U1,%U2,%U0""reload_completed && picochip_schedule_type != DFA_TYPE_NONE"[(match_dup 4)(match_dup 5)]"{rtx op0_high = gen_highpart (HImode, operands[0]);rtx op1_high = gen_highpart (HImode, operands[1]);rtx op0_low = gen_lowpart (HImode, operands[0]);rtx op1_low = gen_lowpart (HImode, operands[1]);rtx op2_high, op2_low;if (CONST_INT == GET_CODE(operands[2])){op2_high = picochip_get_high_const(operands[2]);op2_low = picochip_get_low_const(operands[2]);} else {op2_high = gen_highpart (HImode, operands[2]);op2_low = gen_lowpart (HImode, operands[2]);}operands[4] = gen_add_multi_lower (op0_low, op1_low, op2_low);operands[5] = gen_add_multi_upper (op0_high, op1_high, op2_high);}");; Perform the lowest part of a multi-part addition (SI/DI). This sets;; the flags, so is an picoAlu instruction (we could use a;; conventional addhi, but the addhi is better off being a treated as;; a basicAlu instruction, rather than a picoAlu instruction).(define_insn "add_multi_lower"[(set (match_operand:HI 0 "register_operand" "=r,r,r")(plus:HI (match_operand:HI 1 "register_operand" "r,r,r")(match_operand:HI 2 "general_operand" "r,M,i")))(set (reg:CC CC_REGNUM)(compare:CC (plus:HI (match_dup 1)(match_dup 2))(const_int 0)))]""{ if (CONST_INT == GET_CODE(operands[2]) &&INTVAL(operands[2]) > -16 &&INTVAL(operands[2]) < 0)return "SUB.%# %1,-(%2),%0\t// %0+carry := %1 + %2 (low multi-part)";elsereturn "ADD.%# %1,%2,%0\t// %0+carry := %1 + %2 (low multi-part)";}[(set_attr "type" "picoAlu,picoAlu,picoAlu")(set_attr "longConstant" "false,false,true")(set_attr "length" "2,2,4")]);; Perform the central part of a multi-part addition (DI). This uses;; the CC register, and also sets the CC register, so needs to be;; placed in the first ALU slot. Note that the ADDC must;; use the long constant to represent immediates.(define_insn "add_multi_mid"[(set (match_operand:HI 0 "register_operand" "=r,r")(plus:HI (match_operand:HI 1 "register_operand" "r,r")(plus:HI (match_operand:HI 2 "general_operand" "r,i")(reg:CC CC_REGNUM))))(set (reg:CC CC_REGNUM)(compare:CC (plus:HI (match_dup 1)(match_dup 2))(const_int 0)))]"""ADDC.%# %1,%2,%0\t// %0+carry := carry + %1 + %2 (mid multi-part)"[(set_attr "type" "picoAlu,picoAlu")(set_attr "longConstant" "false,true")(set_attr "length" "2,4")]);; Perform the highest part of a multi-part addition (SI/DI). This;; uses the CC register, but doesn't require any registers to be set,;; so may be scheduled in either of the ALU's. Note that the ADDC must;; use the long constant to represent immediates.(define_insn "add_multi_upper"[(set (match_operand:HI 0 "register_operand" "=r,r")(plus:HI (match_operand:HI 1 "register_operand" "r,r")(plus:HI (match_operand:HI 2 "general_operand" "r,i")(reg:CC CC_REGNUM))))(clobber (reg:CC CC_REGNUM))]"""ADDC.%# %1,%2,%0\t// %0 := carry + %1 + %2 (high multi-part)"[(set_attr "type" "basicAlu,basicAlu")(set_attr "longConstant" "false,true")(set_attr "length" "2,4")]);; The lea instruction is a special type of add operation, which looks;; like a movhi (reg := address). It expands into reg := fp +;; offset. Ideally there should be two variants, which take different;; sized offsets (i.e., using the long constant, or not, as;; appropriate). However, the address operand may have arbitrary;; values added to it later (i.e., the AP will be eliminated, possibly;; converting a small offset into a long offset), so a long offset is;; always assumed.;; Note that the lea can use an addition, and hence may modify the CC;; register. This upsets scheduling, so instead the lea is placed in;; ALU 1 where it cannot modify CC.(define_insn "*lea_add"[(set (match_operand:HI 0 "nonimmediate_operand" "=r")(plus:HI (match_operand:HI 1 "register_operand" "r")(match_operand:HI 2 "immediate_operand" "i")))]"""ADD.1 %1,%2,%0\t// lea (add)");; Note that, though this instruction looks similar to movhi pattern,;; "p" constraint cannot be specified for operands other than;; address_operand, hence the extra pattern below.(define_insn "*lea_move"[(set (match_operand:HI 0 "nonimmediate_operand" "=r")(match_operand:HI 1 "address_operand" "p"))]""{if (REG == GET_CODE(operands[1]))return "COPY.1 %1,%0\t// %0 := %1 (lea)";elsereturn "ADD.1 %b1,%o1,%0\t\t// %0 := %b1 + %o1 (lea)";}[(set_attr "type" "nonCcAlu")(set_attr "longConstant" "true")(set_attr "length" "4")]);;===========================================================================;; Subtraction. Note that these patterns never take immediate second;; operands, since those cases are handled by canonicalising the;; instruction into the addition of a negative costant.;; But, if the first operand needs to be a negative constant, it;; is supported here.;;===========================================================================(define_insn "subhi3"[(set (match_operand:HI 0 "register_operand" "=r,r,r")(minus:HI (match_operand:HI 1 "general_operand" "r,I,i")(match_operand:HI 2 "register_operand" "r,r,r")))(clobber (reg:CC CC_REGNUM))]"""SUB.%# %1,%2,%0 // %0 := %1 - %2 (HI)"[(set_attr "type" "basicAlu,basicAlu,basicAlu")(set_attr "longConstant" "false,true,true")(set_attr "length" "2,4,4")]);; If we peepholed the compare instruction out, we need to make sure the;; sub goes in slot 0. This pattern is just to accomplish that.(define_insn "subhi3_with_use_clause"[(set (match_operand:HI 0 "register_operand" "=r,r,r")(minus:HI (match_operand:HI 1 "general_operand" "r,I,i")(match_operand:HI 2 "register_operand" "r,r,r")))(set (reg:CC CC_REGNUM)(match_operator:CC 3 "picochip_peephole_comparison_operator"[(const_int 0)(const_int 0)]))]"""SUB.0 %1,%2,%0 // %0 := %1 - %2 (HI)"[(set_attr "type" "picoAlu,picoAlu,picoAlu")(set_attr "longConstant" "false,true,true")(set_attr "length" "2,4,4")])(define_insn_and_split "subsi3"[(set (match_operand:SI 0 "register_operand" "=r,r")(minus:SI (match_operand:SI 1 "general_operand" "r,i")(match_operand:SI 2 "register_operand" "r,r")))(clobber (reg:CC CC_REGNUM))]"""// %0 := %1 - %2 (SI)\n\tSUB.%# %L1,%L2,%L0\n\tSUBB.%# %U1,%U2,%U0""reload_completed && picochip_schedule_type != DFA_TYPE_NONE"[(match_dup 4)(match_dup 5)]"{rtx op0_high = gen_highpart (HImode, operands[0]);rtx op0_low = gen_lowpart (HImode, operands[0]);rtx op2_high = gen_highpart (HImode, operands[2]);rtx op2_low = gen_lowpart (HImode, operands[2]);rtx op1_high,op1_low;if (CONST_INT == GET_CODE(operands[1])){op1_high = picochip_get_high_const(operands[1]);op1_low = picochip_get_low_const(operands[1]);} else {op1_high = gen_highpart (HImode, operands[1]);op1_low = gen_lowpart (HImode, operands[1]);}operands[4] = gen_sub_multi_lower (op0_low, op1_low, op2_low);operands[5] = gen_sub_multi_upper (op0_high, op1_high, op2_high);}");; Match the patterns emitted by the multi-part subtraction splitting.;; This sets the CC register, so it needs to go into slot 0.(define_insn "sub_multi_lower"[(set (match_operand:HI 0 "register_operand" "=r,r")(minus:HI (match_operand:HI 1 "general_operand" "r,i")(match_operand:HI 2 "register_operand" "r,r")))(set (reg:CC CC_REGNUM)(compare:CC (minus:HI (match_dup 1) (match_dup 2))(const_int 0)))]"""SUB.%# %1,%2,%0\t// %0+carry := %1 - %2 (lower SI)"[(set_attr "type" "picoAlu,picoAlu")(set_attr "longConstant" "false,true")(set_attr "length" "2,4")]);; Perform the central part of a multi-part addition (DI). This uses;; the CC register, and also sets the CC register, so needs to be;; placed in the first ALU.(define_insn "sub_multi_mid"[(set (match_operand:HI 0 "register_operand" "=r,r")(minus:HI (match_operand:HI 1 "general_operand" "r,i")(minus:HI (match_operand:HI 2 "register_operand" "r,r")(reg:CC CC_REGNUM))))(set (reg:CC CC_REGNUM)(compare:CC (minus:HI (match_dup 1)(match_dup 2))(const_int 0)))]"""SUBB.%# %1,%2,%0\t// %0+carry := carry - %1 - %2 (mid multi-part)"[(set_attr "type" "picoAlu,picoAlu")(set_attr "longConstant" "false,true")(set_attr "length" "2,4")])(define_insn "sub_multi_upper"[(set (match_operand:HI 0 "register_operand" "=r,r")(minus:HI (match_operand:HI 1 "general_operand" "r,i")(minus:HI (match_operand:HI 2 "register_operand" "r,r")(reg:CC CC_REGNUM))))(clobber (reg:CC CC_REGNUM))]"""SUBB.%# %1,%2,%0\t// %0 := carry - %1 - %2 (upper SI)"[(set_attr "type" "basicAlu,basicAlu")(set_attr "longConstant" "false,true")(set_attr "length" "2,4")]);;===========================================================================;; Multiplication (signed);;===========================================================================(define_insn "multiply_machi"[(set (reg:HI ACC_REGNUM)(mult:HI (match_operand:HI 0 "register_operand" "r,r")(match_operand:HI 1"picochip_register_or_immediate_operand" "r,i")))]"TARGET_HAS_MAC_UNIT""MUL %0,%1,acc0\t// acc0 := %0 * %1 (signed)"[(set_attr "length" "3,5")(set_attr "type" "mac,mac")(set_attr "longConstant" "false,true")])(define_expand "mulhi3"[(set (match_operand:HI 0 "register_operand" "")(mult:HI (match_operand:HI 1 "register_operand" "")(match_operand:HI 2 "picochip_register_or_immediate_operand" "")))]"TARGET_HAS_MULTIPLY""");; Different types of mulhi, depending on the AE type. If the AE has MUL unit,;; use the following pattern.(define_insn "*mulhi3_mul"[(set (match_operand:HI 0 "register_operand" "=r,r")(mult:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2"picochip_register_or_immediate_operand" "r,i")))]"TARGET_HAS_MUL_UNIT""MULL %1,%2,%0 // %0 := %1 * %2 (HI)"[(set_attr "length" "3,5")(set_attr "type" "mul,mul")(set_attr "longConstant" "false,true")]);; If the AE has MAC unit, instead, use the following pattern.(define_insn_and_split "*mulhi3_mac"[(set (match_operand:HI 0 "register_operand" "=r,r")(mult:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2"picochip_register_or_immediate_operand" "r,i")))]"TARGET_HAS_MAC_UNIT""// %0 := %1 * %2\n\tMUL %1,%2,acc0\n\tREADACC acc0,frac,%0""TARGET_HAS_MAC_UNIT && reload_completed"[(match_dup 3)(match_dup 4)]"{rtx const_rtx = GEN_INT(0);operands[3] = (gen_multiply_machi(operands[1], operands[2]));operands[4] = (gen_movhi_mac(operands[0],const_rtx));} ")(define_insn "umultiply_machisi"[(set (reg:SI ACC_REGNUM)(mult:SI (zero_extend:SI (match_operand:HI 0 "register_operand" "r"))(zero_extend:SI (match_operand:HI 1 "register_operand" "r"))))]"TARGET_HAS_MAC_UNIT""MULUU %0,%1,acc0\t// acc0 := %0 * %1 (unsigned)"[(set_attr "length" "3")(set_attr "type" "mac")(set_attr "longConstant" "false")])(define_insn "multiply_machisi"[(set (reg:SI ACC_REGNUM)(mult:SI (sign_extend:SI (match_operand:HI 0 "register_operand" "r,r"))(sign_extend:SI (match_operand:HI 1"picochip_register_or_immediate_operand" "r,i"))))]"TARGET_HAS_MAC_UNIT""MUL %0,%1,acc0\t// acc0 := %0 * %1 (signed)"[(set_attr "length" "3,5")(set_attr "type" "mac,mac")(set_attr "longConstant" "false,true")]);; We want to prevent GCC from thinking ACC is a normal register and using;; this pattern. We want it to be used only when you use MAC unit;; multiplication. Added a "use" clause for that sake.(define_insn "movsi_mac"[(set (match_operand:SI 0 "register_operand" "=r")(reg:SI ACC_REGNUM))(use (match_operand:SI 1 "const_int_operand" ""))]"TARGET_HAS_MAC_UNIT""READACC32 acc0,%R0 \t// %0 := acc0 "[(set_attr "length" "3")(set_attr "type" "mac")(set_attr "longConstant" "false")]);; We want to prevent GCC from thinking ACC is a normal register and using;; this pattern. We want it to be used only when you use MAC unit;; multiplication. Added a "use" clause for that sake.(define_insn "movhi_mac"[(set (match_operand:HI 0 "register_operand" "=r")(reg:HI ACC_REGNUM) )(use (match_operand:HI 1 "const_int_operand" ""))]"TARGET_HAS_MAC_UNIT""READACC acc0,frac,%0 \t// %0 := acc0 "[(set_attr "length" "3")(set_attr "type" "mac")(set_attr "longConstant" "false")]);; 16-bit to 32-bit widening signed multiplication.(define_expand "mulhisi3"[(set (match_operand:SI 0 "register_operand" "=&r")(mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "r"))(sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]"TARGET_HAS_MULTIPLY""")(define_insn_and_split "*mulhisi3_mul"[(set (match_operand:SI 0 "register_operand" "=&r")(mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "r"))(sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]"TARGET_HAS_MUL_UNIT""// %0 := %1 * %2 (HI->SI)\;MULL %1,%2,%L0\;MULH %1,%2,%U0";"TARGET_HAS_MUL_UNIT && reload_completed && picochip_schedule_type != DFA_TYPE_NONE"[(match_dup 3)(match_dup 4)]"{rtx op0_high = gen_highpart (HImode, operands[0]);rtx op0_low = gen_lowpart (HImode, operands[0]);operands[3] = gen_mulhisi3_mul_lower(op0_low,operands[1],operands[2]);operands[4] = gen_mulhisi3_mul_higher(op0_high,operands[1],operands[2]);}")(define_insn "mulhisi3_mul_lower"[(set (match_operand:HI 0 "register_operand" "=&r")(subreg:HI(mult:SI(sign_extend:SI (match_operand:HI 1 "register_operand" "r"))(sign_extend:SI (match_operand:HI 2 "register_operand" "r"))) 0))]"TARGET_HAS_MUL_UNIT""MULL %1,%2,%0"[(set_attr "length" "3")(set_attr "type" "mul")(set_attr "longConstant" "false")])(define_insn "mulhisi3_mul_higher"[(set (match_operand:HI 0 "register_operand" "=&r")(subreg:HI(mult:SI(sign_extend:SI (match_operand:HI 1 "register_operand" "r"))(sign_extend:SI (match_operand:HI 2 "register_operand" "r"))) 2))]"TARGET_HAS_MUL_UNIT""MULH %1,%2,%0"[(set_attr "length" "3")(set_attr "type" "mul")(set_attr "longConstant" "false")])(define_insn_and_split "*mulhisi3_mac"[(set (match_operand:SI 0 "register_operand" "=&r")(mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "r"))(sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]"TARGET_HAS_MAC_UNIT""// %0 := %1 * %2 (HI->SI) STAN2\;MUL %1,%2,acc0\;READACC32 acc0,%R0";"TARGET_HAS_MAC_UNIT && reload_completed"[(match_dup 3)(match_dup 4)]"{rtx const_rtx = gen_int_mode(0,SImode);operands[3] = (gen_multiply_machisi(operands[1], operands[2]));operands[4] = (gen_movsi_mac(operands[0],const_rtx));} ");;===========================================================================;; Widening multiplication (unsigned);;===========================================================================(define_expand "umulhisi3"[(set (match_operand:SI 0 "register_operand" "=&r")(mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" "r"))(zero_extend:SI (match_operand:HI 2 "register_operand" "r"))))]"TARGET_HAS_MULTIPLY""")(define_insn_and_split "*umulhisi3_mul"[(set (match_operand:SI 0 "register_operand" "=&r")(mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" "r"))(zero_extend:SI (match_operand:HI 2 "register_operand" "r"))))]"TARGET_HAS_MUL_UNIT""// %0 := %1 * %2 (uHI->uSI Type 1)\;MULUL %1,%2,%L0\n\tMULUH %1,%2,%U0";"TARGET_HAS_MUL_UNIT && reload_completed && picochip_schedule_type != DFA_TYPE_NONE"[(match_dup 3)(match_dup 4)]"{rtx op0_high = gen_highpart (HImode, operands[0]);rtx op0_low = gen_lowpart (HImode, operands[0]);operands[3] = gen_umulhisi3_mul_lower(op0_low,operands[1],operands[2]);operands[4] = gen_umulhisi3_mul_higher(op0_high,operands[1],operands[2]);}")(define_insn "umulhisi3_mul_lower"[(set (match_operand:HI 0 "register_operand" "=&r")(subreg:HI(mult:SI(zero_extend:SI (match_operand:HI 1 "register_operand" "r"))(zero_extend:SI (match_operand:HI 2 "register_operand" "r"))) 0))]"TARGET_HAS_MUL_UNIT""MULUL %1,%2,%0"[(set_attr "length" "3")(set_attr "type" "mul")(set_attr "longConstant" "false")])(define_insn "umulhisi3_mul_higher"[(set (match_operand:HI 0 "register_operand" "=&r")(subreg:HI(mult:SI(zero_extend:SI (match_operand:HI 1 "register_operand" "r"))(zero_extend:SI (match_operand:HI 2 "register_operand" "r"))) 2))]"TARGET_HAS_MUL_UNIT""MULUH %1,%2,%0"[(set_attr "length" "3")(set_attr "type" "mul")(set_attr "longConstant" "false")])(define_insn_and_split "*umulhisi3_mac"[(set (match_operand:SI 0 "register_operand" "=&r")(mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" "r"))(zero_extend:SI (match_operand:HI 2 "register_operand" "r"))))]"TARGET_HAS_MAC_UNIT""// %0 := %1 * %2 (uHI->uSI Type 3)\;MULUU %1,%2,acc0\;READACC32 acc0,%R0";"TARGET_HAS_MAC_UNIT && reload_completed"[(match_dup 3)(match_dup 4)]"{rtx const_rtx = gen_int_mode(0,SImode);operands[3] = (gen_umultiply_machisi(operands[1], operands[2]));operands[4] = (gen_movsi_mac(operands[0],const_rtx));} ");;===========================================================================;; Division (signed);;===========================================================================;; Perform a divmod operation as a function call. This results in some;; registers being clobbered (r0-6, r12 - ignore r13,14 as these are;; known not to be affected).(define_expand "divmodhi4"[; Copy the inputs to r0 and r1.(set (reg:HI 0) (match_operand:HI 1 "register_operand" ""))(set (reg:HI 1) (match_operand:HI 2 "register_operand" "")); Make the function call - note that r12 (link) is clobbered. Note also; that an explicit call is generated. This ensures that gcc notices that; any function containing a div/mod is not a leaf function.(parallel [(match_dup 4)(set (reg:HI 0) (div:HI (reg:HI 0) (reg:HI 1)))(set (reg:HI 1) (mod:HI (reg:HI 0) (reg:HI 1)))(clobber (reg:HI 2))(clobber (reg:HI 3))(clobber (reg:HI 4))(clobber (reg:HI 5))(clobber (reg:HI 12))(clobber (reg:CC CC_REGNUM))]); Set the quotient (returned in register 0)(set (match_operand:HI 0 "register_operand" "") (reg:HI 0)); Set the remainder (returned in register 1)(set (match_operand:HI 3 "register_operand" "") (reg:HI 1))]""{rtx fnName = gen_rtx_SYMBOL_REF (HImode, "_divmodhi4");operands[4] = gen_call_for_divmod (gen_rtx_MEM (QImode, fnName), GEN_INT(0));}); Match a call to divmodhi4. As this is a call, the link register; (r12), and registers r0-5 must be clobbered. Ignore clobbering of; r13/4 as these aren't used by the divide function).(define_insn "*divmodhi4_call"[(call (mem:QI (match_operand:HI 0 "immediate_operand" "i"))(match_operand 1 "const_int_operand" ""))(set (reg:HI 0) (div:HI (reg:HI 0) (reg:HI 1)))(set (reg:HI 1) (mod:HI (reg:HI 0) (reg:HI 1)))(clobber (reg:HI 2))(clobber (reg:HI 3))(clobber (reg:HI 4))(clobber (reg:HI 5))(clobber (reg:HI 12))(clobber (reg:CC CC_REGNUM))]"""JL (%0)\t// call %0%>"[(set_attr "length" "4")(set_attr "longConstant" "true")(set_attr "type" "call")]);; Perform a udivmod operation as a function call. This results in some;; registers being clobbered (r0-6, r12 - ignore r13,14 as these are;; known not to be affected).(define_expand "udivmodhi4"[; Copy the inputs to r0 and r1.(set (reg:HI 0) (match_operand:HI 1 "register_operand" ""))(set (reg:HI 1) (match_operand:HI 2 "register_operand" "")); Make the function call - note that r12 (link) is clobbered. Note also; that an explicit call is generated. This ensures that gcc notices that; any function containing a div/mod is not a leaf function.(parallel [(match_dup 4)(set (reg:HI 0) (udiv:HI (reg:HI 0) (reg:HI 1)))(set (reg:HI 1) (umod:HI (reg:HI 0) (reg:HI 1)))(clobber (reg:HI 2))(clobber (reg:HI 3))(clobber (reg:HI 4))(clobber (reg:HI 5))(clobber (reg:HI 12))(clobber (reg:CC CC_REGNUM))]); Set the quotient (returned in register 0)(set (match_operand:HI 0 "register_operand" "") (reg:HI 0)); Set the remainder (returned in register 1)(set (match_operand:HI 3 "register_operand" "") (reg:HI 1))]""{rtx fnName = gen_rtx_SYMBOL_REF (HImode, "_udivmodhi4");operands[4] = gen_call_for_divmod (gen_rtx_MEM (QImode, fnName), GEN_INT(0));}); Match a call to udivmodhi4. As this is a call, the link register; (r12), and registers r0-5 must be clobbered. Ignore clobbering of; r13/4 as these aren't used by the divide function).(define_insn "*udivmodhi4_call"[(call (mem:QI (match_operand:HI 0 "immediate_operand" "i"))(match_operand 1 "const_int_operand" ""))(set (reg:HI 0) (udiv:HI (reg:HI 0) (reg:HI 1)))(set (reg:HI 1) (umod:HI (reg:HI 0) (reg:HI 1)))(clobber (reg:HI 2))(clobber (reg:HI 3))(clobber (reg:HI 4))(clobber (reg:HI 5))(clobber (reg:HI 12))(clobber (reg:CC CC_REGNUM))]"""JL (%0)\t// call %0%>"[(set_attr "length" "4")(set_attr "longConstant" "true")(set_attr "type" "call")])(define_expand "udivmodsi4"[; Make the function call(set (reg:SI 0) (match_operand:SI 1 "register_operand" ""))(set (reg:SI 2) (match_operand:SI 2 "register_operand" ""))(parallel [(match_dup 4)(set (reg:SI 4) (udiv:SI (reg:SI 0) (reg:SI 2)))(set (reg:SI 6) (umod:SI (reg:SI 0) (reg:SI 2)))(clobber (reg:SI 0))(clobber (reg:SI 2))(clobber (reg:HI 12))(clobber (reg:CC CC_REGNUM))])(set (match_operand:SI 0 "register_operand" "") (reg:SI 4))(set (match_operand:SI 3 "register_operand" "") (reg:SI 6))]""{rtx fnName = gen_rtx_SYMBOL_REF (HImode, "_udivmodsi4");operands[4] = gen_call_for_divmod (gen_rtx_MEM (QImode, fnName), GEN_INT(0));})(define_insn "*udivmodsi4_call"[(call (mem:QI (match_operand:HI 0 "immediate_operand" "i"))(match_operand 1 "const_int_operand" ""))(set (reg:SI 4) (udiv:SI (reg:SI 0) (reg:SI 2)))(set (reg:SI 6) (umod:SI (reg:SI 0) (reg:SI 2)))(clobber (reg:SI 0))(clobber (reg:SI 2))(clobber (reg:HI 12))(clobber (reg:CC CC_REGNUM))]"""JL (%0)\t// call %0%>"[(set_attr "length" "4")(set_attr "longConstant" "true")(set_attr "type" "call")])(define_expand "divmodsi4"[; Make the function call(set (reg:SI 0) (match_operand:SI 1 "register_operand" ""))(set (reg:SI 2) (match_operand:SI 2 "register_operand" ""))(parallel [(match_dup 4)(set (reg:SI 4) (div:SI (reg:SI 0) (reg:SI 2)))(set (reg:SI 6) (mod:SI (reg:SI 0) (reg:SI 2)))(clobber (reg:SI 0))(clobber (reg:SI 2))(clobber (reg:HI 12))(clobber (reg:CC CC_REGNUM))])(set (match_operand:SI 0 "register_operand" "") (reg:SI 4))(set (match_operand:SI 3 "register_operand" "") (reg:SI 6))]""{rtx fnName = gen_rtx_SYMBOL_REF (HImode, "_divmodsi4");operands[4] = gen_call_for_divmod (gen_rtx_MEM (QImode, fnName), GEN_INT(0));})(define_insn "*divmodsi4_call"[(call (mem:QI (match_operand:HI 0 "immediate_operand" "i"))(match_operand 1 "const_int_operand" ""))(set (reg:SI 4) (div:SI (reg:SI 0) (reg:SI 2)))(set (reg:SI 6) (mod:SI (reg:SI 0) (reg:SI 2)))(clobber (reg:SI 0))(clobber (reg:SI 2))(clobber (reg:HI 12))(clobber (reg:CC CC_REGNUM))]"""JL (%0)\t// call %0%>"[(set_attr "length" "4")(set_attr "longConstant" "true")(set_attr "type" "call")]);;===========================================================================;; Bitwise AND. The QI/SI mode instructions are automatically;; synthesised from the HI mode instruction.;;===========================================================================(define_insn "andhi3"[(set (match_operand:HI 0 "register_operand" "=r,r")(and:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2 "general_operand" "r,n")))(clobber (reg:CC CC_REGNUM))]"""AND.%# %1,%2,%0 // %0 := %1 AND %2 (HI)"[(set_attr "type" "basicAlu,basicAlu")(set_attr "longConstant" "false,true")(set_attr "length" "3,5")]);; If we peepholed the compare instruction out, we need to make sure the;; "and" goes in slot 0. This pattern is just to accomplish that.(define_insn "andhi3_with_use_clause"[(set (match_operand:HI 0 "register_operand" "=r,r")(and:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2 "general_operand" "r,n")))(set (reg:CC CC_REGNUM)(match_operator:CC 3 "picochip_peephole_comparison_operator"[(const_int 0)(const_int 0)]))]"""AND.0 %1,%2,%0 // %0 := %1 AND %2 (HI)"[(set_attr "type" "picoAlu,picoAlu")(set_attr "longConstant" "false,true")(set_attr "length" "3,5")]);;===========================================================================;; Bitwise inclusive-OR. The QI mode instruction is automatically;; synthesised from the HI mode instruction.;;===========================================================================(define_insn "iorhi3"[(set (match_operand:HI 0 "register_operand" "=r,r")(ior:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2 "register_operand" "r,n")))(clobber (reg:CC CC_REGNUM))]"""OR.%# %1,%2,%0 // %0 := %1 IOR %2 (HI)"[(set_attr "type" "basicAlu,basicAlu")(set_attr "longConstant" "false,true")(set_attr "length" "3,5")])(define_insn "iorhi3_with_use_clause"[(set (match_operand:HI 0 "register_operand" "=r,r")(ior:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2 "general_operand" "r,n")))(set (reg:CC CC_REGNUM)(match_operator:CC 3 "picochip_peephole_comparison_operator"[(const_int 0)(const_int 0)]))]"""OR.0 %1,%2,%0 // %0 := %1 IOR %2 (HI)"[(set_attr "type" "picoAlu,picoAlu")(set_attr "longConstant" "false,true")(set_attr "length" "3,5")]);;===========================================================================;; Bitwise exclusive-OR. The QI/SI mode instructions are automatically;; synthesised from the HI mode instruction.;;===========================================================================(define_insn "xorhi3"[(set (match_operand:HI 0 "register_operand" "=r,r")(xor:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2 "picochip_register_or_immediate_operand" "r,n")))(clobber (reg:CC CC_REGNUM))]"""XOR.%# %1,%2,%0 // %0 := %1 XOR %2 (HI)"[(set_attr "type" "basicAlu,basicAlu")(set_attr "longConstant" "false,true")(set_attr "length" "3,5")]);;===========================================================================;; Arithmetic shift left.;;===========================================================================(define_insn "ashlhi3"[(set (match_operand:HI 0 "register_operand" "=r,r")(ashift:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2 "general_operand" "r,J")))]"""LSL.%# %1,%2,%0 // %0 := %1 << %2"[(set_attr "type" "picoAlu,basicAlu")(set_attr "length" "3,3")]);;===========================================================================;; Arithmetic shift right.;;===========================================================================(define_insn "builtin_asri"[(set (match_operand:HI 0 "register_operand" "=r")(ashiftrt:HI (match_operand:HI 1 "register_operand" "r")(match_operand:HI 2 "immediate_operand" "")))(clobber (reg:CC CC_REGNUM))]"""ASR.%# %1,%2,%0\t// %0 = %1 >>{arith} %2"[(set_attr "type" "basicAlu")(set_attr "length" "3")]);; The picoChip ISA doesn't have a variable arithmetic shift right, so;; synthesise it. Shifts by constants are directly supported.(define_expand "ashrhi3"[(match_operand:HI 0 "register_operand" "")(match_operand:HI 1 "register_operand" "")(match_operand:HI 2 "picochip_register_or_immediate_operand" "")]""{if (GET_CODE(operands[2]) == CONST_INT)/* Shift by constant is easy. */emit_insn (gen_builtin_asri (operands[0], operands[1], operands[2]));else{/* Synthesise a variable shift. */rtx tmp1;rtx tmp2;rtx tmp3;rtx minus_one;rtx tmp4;/* Fill a temporary with the sign bits. */tmp1 = gen_reg_rtx (HImode);emit_insn (gen_builtin_asri (tmp1, operands[1], GEN_INT(15)));/* Shift the unsigned value. */tmp2 = gen_reg_rtx (HImode);emit_insn (gen_lshrhi3 (tmp2, operands[1], operands[2]));/* The word of sign bits must be shifted back to the left, to zero* out the unwanted lower bits. The amount to shift left by is (15 -* count). Since the shifts are computed modulo 16 (i.e., only the* lower 4 bits of the count are used), the shift amount (15 - count)* is equivalent to !count. */tmp3 = gen_reg_rtx (HImode);minus_one = GEN_INT (-1);emit_insn (gen_xorhi3 (tmp3, operands[2], minus_one));tmp4 = gen_reg_rtx (HImode);emit_insn (gen_ashlhi3 (tmp4, tmp1, tmp3));/* Combine the sign bits with the shifted value. */emit_insn (gen_iorhi3 (operands[0], tmp2, tmp4));}DONE;});;===========================================================================;; Logical shift right.;;===========================================================================(define_insn "lshrhi3"[(set (match_operand:HI 0 "register_operand" "=r,r")(lshiftrt:HI (match_operand:HI 1 "register_operand" "r,r")(match_operand:HI 2 "general_operand" "r,J")))]"""LSR.%# %1,%2,%0 // %0 := %1 >> %2"[(set_attr "type" "picoAlu,basicAlu")(set_attr "length" "3,3")]);;===========================================================================;; Negate.;;===========================================================================;; Negations are performed by subtracting from the constant 0, which;; is loaded into a register. By using a register containing 0, the;; chances of being able to CSE with another 0 value are increased.(define_expand "neghi2"[(set (match_dup 2) (match_dup 3))(parallel [(set (match_operand:HI 0 "register_operand" "=r")(minus:HI (match_dup 2)(match_operand:HI 1 "register_operand" "r")))(clobber (reg:CC CC_REGNUM))])]"""operands[2] = gen_reg_rtx(HImode);operands[3] = GEN_INT(0x00000000);")(define_expand "negsi2"[(set (match_dup 2) (match_dup 3))(parallel [(set (match_operand:SI 0 "register_operand" "=r")(minus:SI (match_dup 2)(match_operand:SI 1 "register_operand" "r")))(clobber (reg:CC CC_REGNUM))])]"""operands[2] = gen_reg_rtx(SImode);operands[3] = GEN_INT(0x00000000);");;===========================================================================;; Absolute value. Taken from the Hacker's Delight, page 17. The second of the;; four options given there produces the smallest, fastest code.;;===========================================================================(define_insn_and_split "abshi2"[(set (match_operand:HI 0 "register_operand" "")(abs:HI (match_operand:HI 1 "register_operand" "")))]"""#"""[(parallel [(set (match_dup 2)(plus:HI (ashiftrt:HI (match_dup 1) (const_int 15))(match_dup 1)))(clobber (reg:CC CC_REGNUM))])(parallel [(set (match_dup 0)(xor:HI (ashiftrt:HI (match_dup 1) (const_int 15))(match_dup 2)))(clobber (reg:CC CC_REGNUM))])]{operands[2] = gen_reg_rtx (HImode);});;===========================================================================;; Bitwise complement. Use auto-synthesised variant for SI mode. Though this;; internally uses xor, the compiler doesnt automatically synthesize it using;; xor, if this pattern was removed.;;===========================================================================(define_insn "one_cmplhi2"[(set (match_operand:HI 0 "register_operand" "=r")(not:HI (match_operand:HI 1 "register_operand" "0")))(clobber (reg:CC CC_REGNUM))]"""XOR.%# %1,-1,%0 // %0 := ~%1"[(set_attr "type" "basicAlu")(set_attr "longConstant" "true")(set_attr "length" "5")]);;===========================================================================;; Count leading zeros. The special sign-bit-count instruction can be used;; to help us here.;; op1:=clz(op1);; The code works by checking to see if the top bit is set. If it is,;; then there are no leading zeros. If the top bit is cleared, then;; the SBC instruction is used to determine how many more leading;; zeros are present, and adding one more for the initial zero.;;===========================================================================(define_insn "clzhi2"[(set (match_operand:HI 0 "register_operand" "=&r")(clz:HI (match_operand:HI 1 "register_operand" "r")))]"""// Count leading zeros\;SBC %1,%0\;ASR.0 %1,15,r15 %| ADD.1 %0,1,%0\;COPYNE 0,%0"[(set_attr "length" "11")]);;===========================================================================;; Count trailing zeros. This can be achieved efficiently by reversing;; using the bitrev instruction, and then counting the leading zeros as;; described above.;;===========================================================================(define_insn "ctzhi2"[(set (match_operand:HI 0 "register_operand" "=&r")(ctz:HI (match_operand:HI 1 "register_operand" "r")))]"""// Count trailing zeros\;BREV %1,%0\;SBC %0,%0\;AND.0 %1,0x0001,r15 %| ADD.1 %0,1,%0\;COPYNE 0,%0"[(set_attr "length" "15")]);;===========================================================================;; Find the first set bit, starting from the least significant bit position.;; This is very similar to the ctz function, except that the bit index is one;; greater than the number of trailing zeros (i.e., SBC + 2), and the;; result of ffs on the zero value is defined.;;===========================================================================(define_insn "ffshi2"[(set (match_operand:HI 0 "register_operand" "=&r")(ffs:HI (match_operand:HI 1 "register_operand" "r")))]"""// First first bit\;BREV %1,%0\;SBC %0,%0\;AND.0 %1,0x0001,r15 %| ADD.1 %0,2,%0\;COPYNE 1,%0\;SUB.0 %1,0x0000,r15\;COPYEQ 0,%0"[(set_attr "length" "20")]);;===========================================================================;; Tablejump Instruction. Jump to an absolute address.;;===========================================================================(define_insn "tablejump"[(set (pc) (unspec:HI [(match_operand:HI 0 "register_operand" "r")] 1))(use (label_ref (match_operand 1 "" "")))(clobber (match_dup 0))]"""JR (%0)\t // Table jump to %0 %>"[(set_attr "length" "2")(set_attr "type" "realBranch")]);; Given the memory address of a QImode value, and a scratch register,;; store the memory operand into the given output operand. The scratch;; operand will not conflict with either of the operands. The other;; two operands may conflict with each other.(define_insn "synthesised_loadqi_unaligned"[(set (match_operand:QI 0 "register_operand" "=r")(match_operand:QI 1 "memory_operand" "m"))(clobber (match_operand:HI 2 "register_operand" "=&r"))(clobber (reg:CC CC_REGNUM))]"""// Synthesised loadqi %0 = Mem(%1) (Scratch %2)\n\tAND.0 %1,-2,%2\n\tLDW (%2)0,%0 %| AND.0 %1,1,%2\n\tLSL.0 %2,3,%2\n\tSUB.0 8,%2,%2\n\tLSL.0 %0,%2,%0\n\tASR.0 %0,8,%0"; Approximate length only. Probably a little shorter than this.[(set_attr "length" "40")]);; Given a memory operand whose alignment is known (the HImode aligned;; base is operand 0, and the number of bits by which to shift is in;; operand 5),(define_expand "synthesised_storeqi_aligned"[; s1 = mem_op(set (match_operand:HI 2 "register_operand" "")(match_operand:HI 0 "memory_operand" "")); s1 = s1 and mask(parallel [(set (match_dup 2) (and:HI (match_dup 2) (match_dup 5)))(clobber (reg:CC CC_REGNUM))]); s2 = source << bitShift(set (match_dup 3)(ashift:HI (subreg:HI (match_operand:QI 1 "register_operand" "") 0)(match_operand:HI 4 "const_int_operand" ""))); s1 = s1 or s2(parallel [(set (match_dup 2) (ior:HI (match_dup 2) (match_dup 3)))(clobber (reg:CC CC_REGNUM))]); mem_op = s1(set (match_dup 0) (match_dup 2))]"!TARGET_HAS_BYTE_ACCESS"{/* Create the byte mask 0xFF00. */operands[5] = gen_int_mode(((~0xFF) >> INTVAL (operands[4])), HImode);});; Reload instructions. See picochip_secondary_reload for an;; explanation of why an SI mode register is used as a scratch. The;; memory operand must be stored in a register (i.e., it can't be an;; offset to another register - this would require another scratch;; register into which the address of the offset could be computed).(define_expand "reload_inqi"[(parallel [(match_operand:QI 0 "register_operand" "=&r")(match_operand:QI 1 "memory_operand" "m")(match_operand:SI 2 "register_operand" "=&r")])]"!TARGET_HAS_BYTE_ACCESS"{rtx scratch, seq;/* Get the scratch register. Given an SI mode value, we have achoice of two HI mode scratch registers, so we can be sure that atleast one of the scratch registers will be different to the outputregister, operand[0]. */if (REGNO (operands[0]) == REGNO (operands[2]))scratch = gen_rtx_REG (HImode, REGNO (operands[2]) + 1);elsescratch = gen_rtx_REG (HImode, REGNO (operands[2]));/* Ensure that the scratch doesn't overlap either of the othertwo operands - however, the other two may overlap eachother. */gcc_assert (REGNO(scratch) != REGNO(operands[0]));gcc_assert (REGNO(scratch) != REGNO(operands[1]));gcc_assert (GET_CODE (operands[1]) == MEM);if (picochip_word_aligned_memory_reference(XEXP(operands[1], 0))){/* Aligned reloads are easy, since they can use word-loads. */seq = gen_synthesised_loadqi_aligned(operands[0], operands[1], scratch);}else{/* Emit the instruction using a define_insn. */seq = gen_synthesised_loadqi_unaligned(operands[0], operands[1], scratch);}emit_insn (seq);DONE;})(define_expand "reload_outqi"[(parallel [(match_operand 0 "memory_operand" "=m")(match_operand:QI 1 "register_operand" "r")(match_operand:SI 2 "register_operand" "=&r")])]"!TARGET_HAS_BYTE_ACCESS"{rtx scratch1 = gen_rtx_REG(HImode, REGNO(operands[2]));rtx scratch2 = gen_rtx_REG(HImode, REGNO(operands[2]) + 1);rtx seq;gcc_assert (GET_CODE (operands[0]) == MEM);if (picochip_word_aligned_memory_reference(XEXP(operands[0], 0))){rtx alignedAddr, bitShift;/* Convert the address of the known alignment into two operands* representing the aligned base address, and the number of shift bits* required to access the required value. */picochip_get_hi_aligned_mem(operands[0], &alignedAddr, &bitShift);/* Emit an aligned store of the source, with the given bit offset. */seq = gen_synthesised_storeqi_aligned(alignedAddr, operands[1], scratch1, scratch2, bitShift);}else{/* This isnt exercised at all. Moreover, with new devices, byte accessis available in all variants. */gcc_unreachable();}emit_insn (seq);DONE;});; Perform a byte load of an alignable memory operand.; op0 = register to load. op1 = memory operand from which to load; op2 = op1, aligned to HI, op3 = const bit shift required to extract byte,; op4 = INTVAL(8 - op3)(define_expand "synthesised_loadqi_aligned"[; Load memory operand into register(set (match_operand:HI 2 "register_operand" "=r")(match_dup 3)); Shift required byte into top byte of word.(set (match_dup 2)(ashift:HI (match_dup 2)(match_dup 4))); Arithmetic shift of byte to sign extend, and move to lowest register.(parallel[(set (subreg:HI (match_dup 0) 0)(ashiftrt:HI (match_dup 2)(const_int 8)))(clobber (reg:CC CC_REGNUM))])(use (match_operand:QI 1 "picochip_alignable_memory_operand" "g"))]"!TARGET_HAS_BYTE_ACCESS"{rtx alignedAddr, bitShift;/* Convert the address of the known alignment into two operands* representing the aligned base address, and the number of shift bits* required to access the required value. */picochip_get_hi_aligned_mem(operands[1], &alignedAddr, &bitShift);operands[3] = alignedAddr;operands[4] = GEN_INT(8 - INTVAL(bitShift));});;============================================================================;; Special instructions.;;============================================================================; Count sign-bits.(define_insn "sbc"[(set (match_operand:HI 0 "register_operand" "=r")(unspec:HI [(match_operand:HI 1 "register_operand" "r")]UNSPEC_SBC))]"""SBC %1,%0\t\t// %0 := SBC(%1)"[(set_attr "type" "picoAlu")(set_attr "length" "2")]); Bit reversal.(define_insn "brev"[(set (match_operand:HI 0 "register_operand" "=r")(unspec:HI [(match_operand:HI 1 "register_operand" "r")]UNSPEC_BREV))]"""BREV %1,%0\t\t// %0 := BREV(%1)"[(set_attr "length" "2")(set_attr "type" "picoAlu")]); Byte swap.(define_insn "bswaphi2"[(set (match_operand:HI 0 "register_operand" "=r")(bswap:HI (match_operand:HI 1 "register_operand" "r")))]"""BYTESWAP %1,%0\t\t// %0 := ByteSwap(%1)"[(set_attr "length" "2")(set_attr "type" "picoAlu")]); Read status word.(define_insn "copysw"[(set (match_operand:HI 0 "register_operand" "=r")(unspec_volatile:HI [(reg:CC CC_REGNUM)] UNSPEC_COPYSW))]"""COPYSW.%# %0\t// %0 := Flags"[(set_attr "type" "basicAlu")(set_attr "length" "2")]); Saturating addition.(define_insn "sataddhi3"[(set (match_operand:HI 0 "register_operand" "=r")(unspec:HI [(match_operand:HI 1 "register_operand" "r")(match_operand:HI 2 "register_operand" "r")]UNSPEC_ADDS))(clobber (reg:CC CC_REGNUM))]"""ADDS %1,%2,%0\t// %0 := sat(%1 + %2)"[(set_attr "type" "picoAlu")(set_attr "length" "3")]); Saturating subtraction.(define_insn "satsubhi3"[(set (match_operand:HI 0 "register_operand" "=r")(unspec:HI [(match_operand:HI 1 "register_operand" "r")(match_operand:HI 2 "register_operand" "r")]UNSPEC_SUBS))(clobber (reg:CC CC_REGNUM))]"""SUBS %1,%2,%0\t// %0 := sat(%1 - %2)"[(set_attr "type" "picoAlu")(set_attr "length" "3")])(define_insn "halt"[(unspec_volatile [(match_operand:HI 0 "const_int_operand" "i")]UNSPEC_HALT)]"""HALT\t// (id %0)"[(set_attr "length" "1")(set_attr "type" "unknown")])(define_insn "internal_testport"[(set (reg:CC CC_REGNUM)(unspec_volatile:CC [(match_operand:HI 0 "const_int_operand" "i")]UNSPEC_INTERNAL_TESTPORT))]"""TSTPORT %0"[(set_attr "length" "2")(set_attr "longConstant" "false")(set_attr "type" "picoAlu")]);;============================================================================;; Communications builtins.;;;; Each builtin comes in two forms: a single port version, which maps;; to a single instruction, and an array port version. The array port;; version is treated as a special type of instruction, which is then;; split into a number of smaller instructions, if the index of the;; port can't be converted into a constant. When the RTL split is;; performed, a function call is emitted, in which the index of the;; port to use is used to compute the address of the function to call;; (i.e., each array port is a function in its own right, and the;; functions are stored as an array which is then indexed to determine;; the correct function). The communication function port array is;; created by the linker if and only if it is required (in a;; collect2-like manner).;;============================================================================; Simple scalar get.(define_insn "commsGet"[(set (match_operand:SI 0 "register_operand" "=r")(unspec_volatile:SI[(match_operand:HI 1 "immediate_operand" "n")]UNSPEC_GET))]"""GET %1,%R0\t// %R0 := PORT(%1)"[(set_attr "type" "comms")(set_attr "length" "2")]); Entry point for array get (the actual port index is computed as the; sum of the index, and the base).;; op0 - Destination; op1 - Requested port index; op2 - size of port array (constant); op3 - base index of port array (constant)(define_expand "commsArrayGet"[(parallel[(set (reg:SI 0)(unspec_volatile:SI [(match_operand:HI 1 "general_operand" "")(match_operand:HI 2 "immediate_operand" "")(match_operand:HI 3 "immediate_operand" "")]UNSPEC_CALL_GET_ARRAY))(clobber (reg:HI LINK_REGNUM))])(set (match_operand:SI 0 "register_operand" "") (reg:SI 0))]"""");; The actual array get instruction. When the array index is a constant,;; an exact instruction may be generated. When the index is variable,;; a call to a special function is generated. This code could be;; split into individual RTL instructions, but it is so rarely;; used, that we won't bother.(define_insn "*commsArrayGetInstruction"[(set (reg:SI 0)(unspec_volatile:SI [(match_operand:HI 0 "general_operand" "r,i")(match_operand:HI 1 "immediate_operand" "")(match_operand:HI 2 "immediate_operand" "")]UNSPEC_CALL_GET_ARRAY))(clobber (reg:HI LINK_REGNUM))]""{return picochip_output_get_array (which_alternative, operands);}); Scalar Put instruction.(define_insn "commsPut"[(unspec_volatile [(match_operand:HI 0 "const_int_operand" "")(match_operand:SI 1 "register_operand" "r")]UNSPEC_PUT)]"""PUT %R1,%0\t// PORT(%0) := %R1"[(set_attr "type" "comms")(set_attr "length" "2")]); Entry point for array put. The operands accepted are:; op0 - Value to put; op1 - Requested port index; op2 - size of port array; op3 - base index of port array; The arguments are marshalled into the fixed registers, so that; the actual put instruction can expand into a call if necessary; (e.g., if the index is variable at run-time).(define_expand "commsArrayPut"[(set (reg:SI 0) (match_operand:SI 0 "general_operand" ""))(parallel[(unspec_volatile [(match_operand:HI 1 "general_operand" "")(match_operand:HI 2 "immediate_operand" "")(match_operand:HI 3 "immediate_operand" "")]UNSPEC_CALL_PUT_ARRAY)(use (reg:SI 0))(clobber (reg:HI LINK_REGNUM))])]"""");; The actual array put instruction. When the array index is a constant,;; an exact instruction may be generated. When the index is variable,;; a call to a special function is generated. This code could be;; split into individual RTL instructions, but it is so rarely;; used, that we won't bother.(define_insn "*commsArrayPutInstruction"[(unspec_volatile [(match_operand:HI 0 "general_operand" "r,i")(match_operand:HI 1 "immediate_operand" "")(match_operand:HI 2 "immediate_operand" "")]UNSPEC_CALL_PUT_ARRAY)(use (reg:SI 0))(clobber (reg:HI LINK_REGNUM))]""{return picochip_output_put_array (which_alternative, operands);});; Scalar test port instruction.(define_insn "commsTestPort"[(set (match_operand:HI 0 "register_operand" "=r")(unspec_volatile:HI [(match_operand:HI 1 "const_int_operand" "")]UNSPEC_TESTPORT))(clobber (reg:CC CC_REGNUM))]"""// %0 := TestPort(%1)\;COPY.1 0,%0 %| TSTPORT %1\;COPYEQ 1,%0"[(set_attr "length" "9")]); Entry point for array tstport (the actual port index is computed as the; sum of the index, and the base).;; op0 - Test value.; op1 - Requested port index; op2 - size of port array (constant); op3 - base index of port array (constant)(define_expand "commsArrayTestPort"[(parallel[(set (match_operand:HI 0 "register_operand" "")(unspec_volatile:HI [(match_operand:HI 1 "general_operand" "")(match_operand:HI 2 "immediate_operand" "")(match_operand:HI 3 "immediate_operand" "")]UNSPEC_CALL_TESTPORT_ARRAY))(clobber (reg:HI LINK_REGNUM))])]"""");; The actual array testport instruction. When the array index is a constant,;; an exact instruction may be generated. When the index is variable,;; a call to a special function is generated. This code could be;; split into individual RTL instructions, but it is so rarely;; used, that we won't bother.(define_insn "*commsArrayTestportInstruction"[(set (match_operand:HI 0 "register_operand" "=r,r")(unspec_volatile:HI [(match_operand:HI 1 "general_operand" "r,i")(match_operand:HI 2 "immediate_operand" "")(match_operand:HI 3 "immediate_operand" "")]UNSPEC_CALL_TESTPORT_ARRAY))(clobber (reg:HI LINK_REGNUM))]""{return picochip_output_testport_array (which_alternative, operands);});; Merge a TSTPORT instruction with the branch to which it;; relates. Often the TSTPORT function (generated by a built-in), is;; used to control conditional execution. The normal sequence of;; instructions would be:;; TSTPORT p;; COPYSW temp;; AND temp, 0x0008, temp;; SUB temp,0,discard;; BEQ label;; This can be made more efficient by detecting the special case where;; the result of a TSTPORT is used to branch, to allow the following;; RTL sequence to be generated instead:;; TSTPORT p;; BEQ label;; A big saving in cycles and bytes!(define_insn_and_split "tstport_branch"[(set (pc)(if_then_else(match_operator 0 "comparison_operator"[(unspec_volatile:HI[(match_operand:HI 1 "const_int_operand" "")]UNSPEC_TESTPORT)(const_int 0)])(label_ref (match_operand 2 "" ""))(pc)))(clobber (reg:CC CC_REGNUM))]"""#"""[(set (reg:CC CC_REGNUM)(unspec_volatile:CC [(match_dup 1)] UNSPEC_INTERNAL_TESTPORT))(parallel [(set (pc)(if_then_else(match_op_dup:HI 4 [(reg:CC CC_REGNUM) (const_int 0)])(label_ref (match_dup 2))(pc)))(use (match_dup 3))])]"{/* Note that the sense of the branch is reversed, since we are* comparing flag != 0. */gcc_assert (GET_CODE(operands[0]) == NE || GET_CODE(operands[0]) == EQ);operands[4] = gen_rtx_fmt_ee(reverse_condition(GET_CODE(operands[0])),GET_MODE(operands[0]), XEXP(operands[0], 0), XEXP(operands[0], 1));operands[3] = GEN_INT (0);}");;============================================================================;; Epilogue/Epilogue expansion.;;============================================================================(define_expand "prologue"[(clobber (const_int 0))]""{picochip_expand_prologue ();DONE;})(define_expand "epilogue"[(use (const_int 0))]""{picochip_expand_epilogue (FALSE);DONE;});;============================================================================;; Trap instruction. This is used to indicate an error. For the;; picoChip processors this is handled by calling a HALT instruction,;; which stops the processor.;;============================================================================(define_insn "trap"[(trap_if (const_int 1) (const_int 6))]"""HALT\t// (Trap)"[(set_attr "length" "2")]);;============================================================================;; Conditional copy instructions. Only equal/not-equal comparisons are;; supported. All other types of comparison remain as branch;; sequences.;;============================================================================;; Define expand seems to consider the resulting two instructions to be;; independent. With a split, guarded by reload, it works correctly.(define_expand "movhicc"[(set (match_operand:HI 0 "register_operand" "=r,r")(if_then_else:HI (match_operand:HI 1 "" "")(match_operand:HI 2 "register_operand" "0,0")(match_operand:HI 3 "picochip_register_or_immediate_operand" "r,i")))]""{if (!picochip_check_conditional_copy (operands))FAIL;})(define_insn_and_split "*checked_movhicc"[(set (match_operand:HI 0 "register_operand" "=r,r")(if_then_else:HI (match_operator 1 "picochip_peephole_comparison_operator"[(match_operand:HI 4 "register_operand" "r,r")(match_operand:HI 5 "picochip_comparison_operand" "r,i")])(match_operand:HI 2 "register_operand" "0,0")(match_operand:HI 3 "picochip_register_or_immediate_operand" "r,i")))]"""#""reload_completed"[(set (reg:CC CC_REGNUM) (match_dup 1))(parallel [(set (match_operand:HI 0 "register_operand" "=r,r")(if_then_else:HI (match_op_dup:HI 1 [(reg:CC CC_REGNUM) (const_int 0)])(match_operand:HI 2 "picochip_register_or_immediate_operand" "0,0")(match_operand:HI 3 "picochip_register_or_immediate_operand" "r,i")))(use (match_dup 6))])]"{operands[6] = GEN_INT(GET_CODE(operands[0]));}");; We dont do any checks here. But this pattern is used only when movhicc;; was checked. Put a "use" clause to make sure.(define_insn "*conditional_copy"[(set (match_operand:HI 0 "register_operand" "=r,r")(if_then_else:HI(match_operator:HI 4 "picochip_peephole_comparison_operator"[(reg:CC CC_REGNUM) (const_int 0)])(match_operand:HI 1 "register_operand" "0,0")(match_operand:HI 2 "picochip_register_or_immediate_operand" "r,i")))(use (match_operand:HI 3 "const_int_operand" ""))]""{gcc_assert (GET_CODE(operands[4]) == EQ || GET_CODE(operands[4]) == NE);/* Note that the comparison is reversed as the pattern matchesthe *else* part of the if_then_else */switch (GET_CODE(operands[4])){case EQ: return "COPYNE %2,%0\t// if (NE) %0 := %2";case NE: return "COPYEQ %2,%0\t// if (EQ) %0 := %2";default:gcc_unreachable();}}[(set_attr "length" "2")(set_attr "type" "picoAlu,picoAlu")(set_attr "longConstant" "false,true")]);;============================================================================;; Scheduling, including delay slot scheduling.;;============================================================================(automata_option "v")(automata_option "ndfa");; Define each VLIW slot as a CPU resource. Note the three flavours of;; branch. `realBranch' is an actual branch instruction. `macroBranch';; is a directive to the assembler, which may expand into multiple;; instructions. `call' is an actual branch instruction, but one which;; sets the link register, and hence can't be scheduled alongside;; other instructions which set the link register. When the DFA;; scheduler is fixed to prevent it scheduling a JL with an R12;; setting register, the call type branches can be replaced by;; realBranch types instead.(define_attr "type""picoAlu,basicAlu,nonCcAlu,mem,call,realBranch,macroBranch,mul,mac,app,comms,unknown"(const_string "unknown"))(define_attr "schedType" "none,space,speed"(const (symbol_ref "(enum attr_schedType) picochip_schedule_type")));; Define whether an instruction uses a long constant.(define_attr "longConstant""true,false" (const_string "false"));; Define three EU slots.(define_query_cpu_unit "slot0,slot1,slot2");; Pull in the pipeline descriptions for speed or space scheduling.(include "dfa_speed.md")(include "dfa_space.md"); Unknown instructions are assumed to take a single cycle, and use all; slots. This enables them to actually output a sequence of; instructions without any limitation. For the purposes of; scheduling, unknown instructions are a pain, and should be removed; completely. This means that RTL patterns should always be used to; reduce complex sequences of instructions to individual instructions.(define_insn_reservation "unknownInsn" 1(eq_attr "type" "unknown")"(slot0+slot1+slot2)"); Allow any non-branch instructions to be placed in the branch; slot. Branch slots are always executed.(define_delay (eq_attr "type" "realBranch,call")[(eq_attr "type" "!realBranch,macroBranch,call,unknown") (nil) (nil)])
Go to most recent revision | Compare with Previous | Blame | View Log