URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [rx/] [rx.md] - Rev 735
Go to most recent revision | Compare with Previous | Blame | View Log
;; Machine Description for Renesas RX processors;; Copyright (C) 2008, 2009, 2010, 2011, 2012;; Free Software Foundation, Inc.;; Contributed by Red Hat.;; This file is part of GCC.;; GCC is free software; you can redistribute it and/or modify;; it under the terms of the GNU General Public License as published by;; the Free Software Foundation; either version 3, or (at your option);; any later version.;; GCC is distributed in the hope that it will be useful,;; but WITHOUT ANY WARRANTY; without even the implied warranty of;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the;; GNU General Public License for more details.;; You should have received a copy of the GNU General Public License;; along with GCC; see the file COPYING3. If not see;; <http://www.gnu.org/licenses/>.;; This code iterator is used for sign- and zero- extensions.(define_mode_iterator small_int_modes [(HI "") (QI "")]);; This code iterator is used for max and min operations.(define_mode_iterator int_modes [(SI "") (HI "") (QI "")]);; We do not handle DFmode here because it is either;; the same as SFmode, or if -m64bit-doubles is active;; then all operations on doubles have to be handled by;; library functions.(define_mode_iterator register_modes[(SF "ALLOW_RX_FPU_INSNS") (SI "") (HI "") (QI "")])(define_constants[(SP_REG 0)(CC_REG 16)(UNSPEC_LOW_REG 0)(UNSPEC_HIGH_REG 1)(UNSPEC_RTE 10)(UNSPEC_RTFI 11)(UNSPEC_NAKED 12)(UNSPEC_CONST 13)(UNSPEC_MOVSTR 20)(UNSPEC_MOVMEM 21)(UNSPEC_SETMEM 22)(UNSPEC_STRLEN 23)(UNSPEC_CMPSTRN 24)(UNSPEC_BUILTIN_BRK 30)(UNSPEC_BUILTIN_CLRPSW 31)(UNSPEC_BUILTIN_INT 32)(UNSPEC_BUILTIN_MACHI 33)(UNSPEC_BUILTIN_MACLO 34)(UNSPEC_BUILTIN_MULHI 35)(UNSPEC_BUILTIN_MULLO 36)(UNSPEC_BUILTIN_MVFACHI 37)(UNSPEC_BUILTIN_MVFACMI 38)(UNSPEC_BUILTIN_MVFC 39)(UNSPEC_BUILTIN_MVFCP 40)(UNSPEC_BUILTIN_MVTACHI 41)(UNSPEC_BUILTIN_MVTACLO 42)(UNSPEC_BUILTIN_MVTC 43)(UNSPEC_BUILTIN_MVTIPL 44)(UNSPEC_BUILTIN_RACW 45)(UNSPEC_BUILTIN_REVW 46)(UNSPEC_BUILTIN_RMPA 47)(UNSPEC_BUILTIN_ROUND 48)(UNSPEC_BUILTIN_SAT 49)(UNSPEC_BUILTIN_SETPSW 50)(UNSPEC_BUILTIN_WAIT 51)(UNSPEC_PID_ADDR 52)])(define_attr "length" "" (const_int 8))(include "predicates.md")(include "constraints.md");; Pipeline description.;; The RX only has a single pipeline. It has five stages (fetch,;; decode, execute, memory access, writeback) each of which normally;; takes a single CPU clock cycle.;; The timings attribute consists of two numbers, the first is the;; throughput, which is the number of cycles the instruction takes;; to execute and generate a result. The second is the latency;; which is the effective number of cycles the instruction takes to;; execute if its result is used by the following instruction. The;; latency is always greater than or equal to the throughput.;; These values were taken from tables 2.13 and 2.14 in section 2.8;; of the RX610 Group Hardware Manual v0.11;; Note - it would be nice to use strings rather than integers for;; the possible values of this attribute, so that we can have the;; gcc build mechanism check for values that are not supported by;; the reservations below. But this will not work because the code;; in rx_adjust_sched_cost() needs integers not strings.(define_attr "timings" "" (const_int 11))(define_automaton "pipelining")(define_cpu_unit "throughput" "pipelining")(define_insn_reservation "throughput__1_latency__1" 1(eq_attr "timings" "11") "throughput")(define_insn_reservation "throughput__1_latency__2" 2(eq_attr "timings" "12") "throughput,nothing")(define_insn_reservation "throughput__2_latency__2" 1(eq_attr "timings" "22") "throughput*2")(define_insn_reservation "throughput__3_latency__3" 1(eq_attr "timings" "33") "throughput*3")(define_insn_reservation "throughput__3_latency__4" 2(eq_attr "timings" "34") "throughput*3,nothing")(define_insn_reservation "throughput__4_latency__4" 1(eq_attr "timings" "44") "throughput*4")(define_insn_reservation "throughput__4_latency__5" 2(eq_attr "timings" "45") "throughput*4,nothing")(define_insn_reservation "throughput__5_latency__5" 1(eq_attr "timings" "55") "throughput*5")(define_insn_reservation "throughput__5_latency__6" 2(eq_attr "timings" "56") "throughput*5,nothing")(define_insn_reservation "throughput__6_latency__6" 1(eq_attr "timings" "66") "throughput*6")(define_insn_reservation "throughput_10_latency_10" 1(eq_attr "timings" "1010") "throughput*10")(define_insn_reservation "throughput_11_latency_11" 1(eq_attr "timings" "1111") "throughput*11")(define_insn_reservation "throughput_16_latency_16" 1(eq_attr "timings" "1616") "throughput*16")(define_insn_reservation "throughput_18_latency_18" 1(eq_attr "timings" "1818") "throughput*18");; ----------------------------------------------------------------------------;; Comparisons;; Note - we do not specify the two instructions necessary to perform;; a compare-and-branch in the cbranchsi4 pattern because that would;; allow the comparison to be moved away from the jump before the reload;; pass has completed. That would be problematical because reload can;; generate ADDSI3 instructions which would corrupt the PSW flags.(define_expand "cbranchsi4"[(set (pc)(if_then_else(match_operator 0 "comparison_operator"[(match_operand:SI 1 "register_operand")(match_operand:SI 2 "rx_source_operand")])(label_ref (match_operand 3 ""))(pc)))]"")(define_insn_and_split "*cbranchsi4"[(set (pc)(if_then_else(match_operator 3 "comparison_operator"[(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "rx_source_operand" "riQ")])(match_operand 2 "label_ref_operand" "")(pc)))]"""#""reload_completed"[(const_int 0)]{rx_split_cbranch (CCmode, GET_CODE (operands[3]),operands[0], operands[1], operands[2]);DONE;})(define_insn "*cmpsi"[(set (reg:CC CC_REG)(compare:CC (match_operand:SI 0 "register_operand" "r,r,r,r,r,r,r")(match_operand:SI 1 "rx_source_operand" "r,Uint04,Int08,Sint16,Sint24,i,Q")))]"reload_completed""cmp\t%Q1, %0"[(set_attr "timings" "11,11,11,11,11,11,33")(set_attr "length" "2,2,3,4,5,6,5")]);; Canonical method for representing TST.(define_insn_and_split "*cbranchsi4_tst"[(set (pc)(if_then_else(match_operator 3 "rx_zs_comparison_operator"[(and:SI (match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "rx_source_operand" "riQ"))(const_int 0)])(match_operand 2 "label_ref_operand" "")(pc)))]"""#""reload_completed"[(const_int 0)]{rx_split_cbranch (CC_ZSmode, GET_CODE (operands[3]),XEXP (operands[3], 0), XEXP (operands[3], 1),operands[2]);DONE;});; Various other ways that GCC codes "var & const"(define_insn_and_split "*cbranchsi4_tst_ext"[(set (pc)(if_then_else(match_operator 4 "rx_z_comparison_operator"[(zero_extract:SI(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "rx_constshift_operand" "")(match_operand:SI 2 "rx_constshift_operand" ""))(const_int 0)])(match_operand 3 "label_ref_operand" "")(pc)))]"""#""reload_completed"[(const_int 0)]{HOST_WIDE_INT mask;rtx x;mask = 1;mask <<= INTVAL (operands[1]);mask -= 1;mask <<= INTVAL (operands[2]);x = gen_rtx_AND (SImode, operands[0], gen_int_mode (mask, SImode));rx_split_cbranch (CC_ZSmode, GET_CODE (operands[4]),x, const0_rtx, operands[3]);DONE;})(define_insn "*tstsi"[(set (reg:CC_ZS CC_REG)(compare:CC_ZS(and:SI (match_operand:SI 0 "register_operand" "r,r,r")(match_operand:SI 1 "rx_source_operand" "r,i,Q"))(const_int 0)))]"reload_completed""tst\t%Q1, %0"[(set_attr "timings" "11,11,33")(set_attr "length" "3,7,6")])(define_expand "cbranchsf4"[(set (pc)(if_then_else(match_operator 0 "rx_fp_comparison_operator"[(match_operand:SF 1 "register_operand")(match_operand:SF 2 "rx_source_operand")])(label_ref (match_operand 3 ""))(pc)))]"ALLOW_RX_FPU_INSNS")(define_insn_and_split "*cbranchsf4"[(set (pc)(if_then_else(match_operator 3 "rx_fp_comparison_operator"[(match_operand:SF 0 "register_operand" "r")(match_operand:SF 1 "rx_source_operand" "rFQ")])(match_operand 2 "label_ref_operand" "")(pc)))]"ALLOW_RX_FPU_INSNS""#""&& reload_completed"[(const_int 0)]{rx_split_cbranch (CC_Fmode, GET_CODE (operands[3]),operands[0], operands[1], operands[2]);DONE;})(define_insn "*cmpsf"[(set (reg:CC_F CC_REG)(compare:CC_F(match_operand:SF 0 "register_operand" "r,r,r")(match_operand:SF 1 "rx_source_operand" "r,F,Q")))]"ALLOW_RX_FPU_INSNS && reload_completed""fcmp\t%1, %0"[(set_attr "timings" "11,11,33")(set_attr "length" "3,7,5")]);; Flow Control Instructions:(define_insn "*conditional_branch"[(set (pc)(if_then_else(match_operator 1 "comparison_operator"[(reg CC_REG) (const_int 0)])(label_ref (match_operand 0 "" ""))(pc)))]"reload_completed""b%B1\t%0"[(set_attr "length" "8") ;; This length is wrong, but it is;; too hard to compute statically.(set_attr "timings" "33")] ;; The timing assumes that the branch is taken.);; ----------------------------------------------------------------------------(define_insn "jump"[(set (pc)(label_ref (match_operand 0 "" "")))]"""bra\t%0"[(set_attr "length" "4")(set_attr "timings" "33")])(define_insn "indirect_jump"[(set (pc)(match_operand:SI 0 "register_operand" "r"))]"""jmp\t%0"[(set_attr "length" "2")(set_attr "timings" "33")])(define_insn "tablejump"[(set (pc)(match_operand:SI 0 "register_operand" "r"))(use (label_ref (match_operand 1 "" "")))]""{ return TARGET_PID ? (TARGET_AS100_SYNTAX ? "\n?:\tbra\t%0": "\n1:\tbra\t%0"): "\n1:jmp\t%0";}[(set_attr "timings" "33")(set_attr "length" "2")])(define_expand "return"[(return)]"rx_can_use_simple_return ()""rx_expand_epilogue (false); DONE;")(define_insn "simple_return"[(return)]"""rts"[(set_attr "length" "1")(set_attr "timings" "55")]);; Unspec used so that the constant will not be invalid;; if -mmax-constant-size has been specified.(define_insn "deallocate_and_return"[(set (reg:SI SP_REG)(plus:SI (reg:SI SP_REG)(const:SI (unspec:SI [(match_operand 0 "const_int_operand" "n")] UNSPEC_CONST))))(return)]"""rtsd\t%0"[(set_attr "length" "2")(set_attr "timings" "55")])(define_insn "pop_and_return"[(match_parallel 1 "rx_rtsd_vector"[(set (reg:SI SP_REG)(plus:SI (reg:SI SP_REG)(match_operand:SI 0 "const_int_operand" "n")))])(return)]"reload_completed"{rx_emit_stack_popm (operands, false);return "";}[(set_attr "length" "3")(set_attr "timings" "56")])(define_insn "fast_interrupt_return"[(unspec_volatile [(return)] UNSPEC_RTFI) ]"""rtfi"[(set_attr "length" "2")(set_attr "timings" "33")])(define_insn "exception_return"[(unspec_volatile [(return)] UNSPEC_RTE) ]"""rte"[(set_attr "length" "2")(set_attr "timings" "66")])(define_insn "naked_return"[(unspec_volatile [(return)] UNSPEC_NAKED) ]"""; Naked function: epilogue provided by programmer.");; Note - the following set of patterns do not use the "memory_operand";; predicate or an "m" constraint because we do not allow symbol_refs;; or label_refs as legitmate memory addresses. This matches the;; behaviour of most of the RX instructions. Only the call/branch;; instructions are allowed to refer to symbols/labels directly.;; The call operands are in QImode because that is the value of;; FUNCTION_MODE(define_expand "call"[(call (match_operand:QI 0 "general_operand")(match_operand:SI 1 "general_operand"))]""{rtx dest = XEXP (operands[0], 0);if (! rx_call_operand (dest, Pmode))dest = force_reg (Pmode, dest);emit_call_insn (gen_call_internal (dest));DONE;})(define_insn "call_internal"[(call (mem:QI (match_operand:SI 0 "rx_call_operand" "r,Symbol"))(const_int 0))(clobber (reg:CC CC_REG))]"""@jsr\t%0bsr\t%A0"[(set_attr "length" "2,4")(set_attr "timings" "33")])(define_expand "call_value"[(set (match_operand 0 "register_operand")(call (match_operand:QI 1 "general_operand")(match_operand:SI 2 "general_operand")))]""{rtx dest = XEXP (operands[1], 0);if (! rx_call_operand (dest, Pmode))dest = force_reg (Pmode, dest);emit_call_insn (gen_call_value_internal (operands[0], dest));DONE;})(define_insn "call_value_internal"[(set (match_operand 0 "register_operand" "=r,r")(call (mem:QI (match_operand:SI 1 "rx_call_operand" "r,Symbol"))(const_int 0)))(clobber (reg:CC CC_REG))]"""@jsr\t%1bsr\t%A1"[(set_attr "length" "2,4")(set_attr "timings" "33")]);; Note - we do not allow indirect sibcalls (with the address;; held in a register) because we cannot guarantee that the register;; chosen will be a call-used one. If it is a call-saved register,;; then the epilogue code will corrupt it by popping the saved value;; off of the stack.(define_expand "sibcall"[(parallel[(call (mem:QI (match_operand:SI 0 "rx_symbolic_call_operand"))(match_operand:SI 1 "general_operand"))(return)])]""{if (MEM_P (operands[0]))operands[0] = XEXP (operands[0], 0);emit_call_insn (gen_sibcall_internal (operands[0]));DONE;})(define_insn "sibcall_internal"[(call (mem:QI (match_operand:SI 0 "rx_symbolic_call_operand" "Symbol"))(const_int 0))(return)]"""bra\t%A0"[(set_attr "length" "4")(set_attr "timings" "33")])(define_expand "sibcall_value"[(parallel[(set (match_operand 0 "register_operand")(call (mem:QI (match_operand:SI 1 "rx_symbolic_call_operand"))(match_operand:SI 2 "general_operand")))(return)])]""{if (MEM_P (operands[1]))operands[1] = XEXP (operands[1], 0);emit_call_insn (gen_sibcall_value_internal (operands[0], operands[1]));DONE;})(define_insn "sibcall_value_internal"[(set (match_operand 0 "register_operand" "=r")(call (mem:QI (match_operand:SI 1 "rx_symbolic_call_operand" "Symbol"))(const_int 0)))(return)]"""bra\t%A1"[(set_attr "length" "4")(set_attr "timings" "33")]);; Function Prologue/Epilogue Instructions(define_expand "prologue"[(const_int 0)]"""rx_expand_prologue (); DONE;")(define_expand "epilogue"[(return)]"""rx_expand_epilogue (false); DONE;")(define_expand "sibcall_epilogue"[(return)]"""rx_expand_epilogue (true); DONE;");; Move Instructions;; Note - we do not allow memory to memory moves, even though the ISA;; supports them. The reason is that the conditions on such moves are;; too restrictive, specifically the source addressing mode is limited;; by the destination addressing mode and vice versa. (For example it;; is not possible to use indexed register indirect addressing for one;; of the operands if the other operand is anything other than a register,;; but it is possible to use register relative addressing when the other;; operand also uses register relative or register indirect addressing).;;;; GCC does not support computing legitimate addresses based on the;; nature of other operands involved in the instruction, and reload is;; not smart enough to cope with a whole variety of different memory;; addressing constraints, so it is simpler and safer to just refuse;; to support memory to memory moves.(define_expand "mov<register_modes:mode>"[(set (match_operand:register_modes 0 "general_operand")(match_operand:register_modes 1 "general_operand"))]""{if (MEM_P (operands[0]) && MEM_P (operands[1]))operands[1] = copy_to_mode_reg (<register_modes:MODE>mode, operands[1]);operands[0] = rx_maybe_pidify_operand (operands[0], 0);operands[1] = rx_maybe_pidify_operand (operands[1], 0);if (GET_CODE (operands[0]) != REG&& GET_CODE (operands[1]) == PLUS)operands[1] = copy_to_mode_reg (<register_modes:MODE>mode, operands[1]);if (GET_CODE (operands[1]) == PLUS && GET_MODE (operands[1]) == SImode){emit_insn (gen_addsi3 (operands[0], XEXP (operands[1], 0), XEXP (operands[1], 1)));DONE;}if (CONST_INT_P (operand1)&& ! rx_is_legitimate_constant (<register_modes:MODE>mode, operand1))FAIL;})(define_insn "*mov<register_modes:mode>_internal"[(set (match_operand:register_modes0 "nonimmediate_operand" "=r,r,r,r,r,r,m,Q,Q,Q,Q,r")(match_operand:register_modes1 "general_operand" "Int08,Sint16,Sint24,i,r,m,r,Int08,Sint16,Sint24,i,RpdaRpid"))]""{ return rx_gen_move_template (operands, false); }[(set_attr "length" "3,4,5,6,2,4,6,5,6,7,8,8")(set_attr "timings" "11,11,11,11,11,12,11,11,11,11,11,11")])(define_insn "extend<small_int_modes:mode>si2"[(set (match_operand:SI 0 "register_operand" "=r,r")(sign_extend:SI (match_operand:small_int_modes1 "nonimmediate_operand" "r,m")))]""{ return rx_gen_move_template (operands, false); }[(set_attr "length" "2,6")(set_attr "timings" "11,12")])(define_insn "zero_extend<small_int_modes:mode>si2"[(set (match_operand:SI 0 "register_operand" "=r,r")(zero_extend:SI (match_operand:small_int_modes1 "nonimmediate_operand" "r,m")))]""{ return rx_gen_move_template (operands, true); }[(set_attr "length" "2,4")(set_attr "timings" "11,12")])(define_insn "stack_push"[(set (reg:SI SP_REG)(minus:SI (reg:SI SP_REG)(const_int 4)))(set (mem:SI (reg:SI SP_REG))(match_operand:SI 0 "register_operand" "r"))]"""push.l\t%0"[(set_attr "length" "2")])(define_insn "stack_pushm"[(match_parallel 1 "rx_store_multiple_vector"[(set (reg:SI SP_REG)(minus:SI (reg:SI SP_REG)(match_operand:SI 0 "const_int_operand" "n")))])]"reload_completed"{rx_emit_stack_pushm (operands);return "";}[(set_attr "length" "2")(set_attr "timings" "44")] ;; The timing is a guesstimate average timing.)(define_insn "stack_pop"[(set (match_operand:SI 0 "register_operand" "=r")(mem:SI (reg:SI SP_REG)))(set (reg:SI SP_REG)(plus:SI (reg:SI SP_REG)(const_int 4)))]"""pop\t%0"[(set_attr "length" "2")(set_attr "timings" "12")])(define_insn "stack_popm"[(match_parallel 1 "rx_load_multiple_vector"[(set (reg:SI SP_REG)(plus:SI (reg:SI SP_REG)(match_operand:SI 0 "const_int_operand" "n")))])]"reload_completed"{rx_emit_stack_popm (operands, true);return "";}[(set_attr "length" "2")(set_attr "timings" "45")] ;; The timing is a guesstimate average timing.)(define_insn_and_split "cstoresi4"[(set (match_operand:SI 0 "register_operand" "=r")(match_operator:SI 1 "comparison_operator"[(match_operand:SI 2 "register_operand" "r")(match_operand:SI 3 "rx_source_operand" "riQ")]))(clobber (reg:CC CC_REG))]"""#""reload_completed"[(const_int 0)]{rtx flags, x;flags = gen_rtx_REG (CCmode, CC_REG);x = gen_rtx_COMPARE (CCmode, operands[2], operands[3]);x = gen_rtx_SET (VOIDmode, flags, x);emit_insn (x);x = gen_rtx_fmt_ee (GET_CODE (operands[1]), SImode, flags, const0_rtx);x = gen_rtx_SET (VOIDmode, operands[0], x);emit_insn (x);DONE;})(define_insn "*sccc"[(set (match_operand:SI 0 "register_operand" "=r")(match_operator:SI 1 "comparison_operator"[(reg CC_REG) (const_int 0)]))]"reload_completed""sc%B1.L\t%0"[(set_attr "length" "3")])(define_insn_and_split "cstoresf4"[(set (match_operand:SI 0 "register_operand" "=r")(match_operator:SI 1 "rx_fp_comparison_operator"[(match_operand:SF 2 "register_operand" "r")(match_operand:SF 3 "rx_source_operand" "rFQ")]))]"ALLOW_RX_FPU_INSNS""#""reload_completed"[(const_int 0)]{rtx flags, x;flags = gen_rtx_REG (CC_Fmode, CC_REG);x = gen_rtx_COMPARE (CC_Fmode, operands[2], operands[3]);x = gen_rtx_SET (VOIDmode, flags, x);emit_insn (x);x = gen_rtx_fmt_ee (GET_CODE (operands[1]), SImode, flags, const0_rtx);x = gen_rtx_SET (VOIDmode, operands[0], x);emit_insn (x);DONE;})(define_expand "movsicc"[(parallel[(set (match_operand:SI 0 "register_operand")(if_then_else:SI (match_operand:SI 1 "comparison_operator")(match_operand:SI 2 "nonmemory_operand")(match_operand:SI 3 "nonmemory_operand")))(clobber (reg:CC CC_REG))])]""{/* One operand must be a constant or a register, the other must be a register. */if ( ! CONSTANT_P (operands[2])&& ! CONSTANT_P (operands[3])&& ! (REG_P (operands[2]) && REG_P (operands[3])))FAIL;})(define_insn_and_split "*movsicc"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(if_then_else:SI(match_operator 5 "comparison_operator"[(match_operand:SI 3 "register_operand" "r,r,r")(match_operand:SI 4 "rx_source_operand" "riQ,riQ,riQ")])(match_operand:SI 1 "nonmemory_operand" "i,ri,r")(match_operand:SI 2 "nonmemory_operand" "ri,i,r")))(clobber (reg:CC CC_REG))]"(CONSTANT_P (operands[1]) || CONSTANT_P (operands[2]))|| (REG_P (operands[1]) && REG_P (operands[2]))""#""&& reload_completed"[(const_int 0)]{rtx x, flags, op0, op1, op2;enum rtx_code cmp_code;flags = gen_rtx_REG (CCmode, CC_REG);x = gen_rtx_COMPARE (CCmode, operands[3], operands[4]);emit_insn (gen_rtx_SET (VOIDmode, flags, x));cmp_code = GET_CODE (operands[5]);op0 = operands[0];op1 = operands[1];op2 = operands[2];/* If OP2 is the constant, reverse the sense of the move.Likewise if both operands are registers but OP1 == OP0. */if ((! CONSTANT_P (operands[1]) && CONSTANT_P (operands[2]))|| (REG_P (operands[1]) && REG_P (operands[2])&& rtx_equal_p (op0, op1))){x = op1, op1 = op2, op2 = x;cmp_code = reverse_condition (cmp_code);}/* If OP2 does not match the output, copy it into place. We have allowedthese alternatives so that the destination can legitimately be one ofthe comparison operands without increasing register pressure. */if (! rtx_equal_p (op0, op2))emit_move_insn (op0, op2);x = gen_rtx_fmt_ee (cmp_code, VOIDmode, flags, const0_rtx);x = gen_rtx_IF_THEN_ELSE (SImode, x, op1, op0);emit_insn (gen_rtx_SET (VOIDmode, op0, x));DONE;})(define_insn "*stcc"[(set (match_operand:SI 0 "register_operand" "+r,r,r,r")(if_then_else:SI(match_operator 2 "rx_z_comparison_operator"[(reg CC_REG) (const_int 0)])(match_operand:SI 1 "immediate_operand" "Sint08,Sint16,Sint24,i")(match_dup 0)))]"reload_completed&& ((GET_CODE (operands[2]) == EQ) || (GET_CODE (operands[2]) == NE))"{if (GET_CODE (operands[2]) == EQ)return "stz\t%1, %0";elsereturn "stnz\t%1, %0";}[(set_attr "length" "4,5,6,7")])(define_insn "*stcc_reg"[(set (match_operand:SI 0 "register_operand" "+r,r,r,r,r,r")(if_then_else:SI(match_operator 2 "comparison_operator"[(reg CC_REG) (const_int 0)])(match_operand:SI 1 "nonmemory_operand""r,Uint04,Sint08,Sint16,Sint24,i")(match_dup 0)))]"reload_completed"{PUT_CODE (operands[2], reverse_condition (GET_CODE (operands[2])));return "b%B2 1f\n\tmov %1, %0\n1:";}[(set_attr "length" "3,3,4,5,6,7")]);; Arithmetic Instructions(define_insn "abssi2"[(set (match_operand:SI 0 "register_operand" "=r,r")(abs:SI (match_operand:SI 1 "register_operand" "0,r")))(clobber (reg:CC CC_REG))]"""@abs\t%0abs\t%1, %0"[(set_attr "length" "2,3")])(define_insn "*abssi2_flags"[(set (match_operand:SI 0 "register_operand" "=r,r")(abs:SI (match_operand:SI 1 "register_operand" "0,r")))(set (reg CC_REG)(compare (abs:SI (match_dup 1))(const_int 0)))];; Note - although the ABS instruction does set the O bit in the processor;; status word, it does not do so in a way that is comparable with the CMP;; instruction. Hence we use CC_ZSmode rather than CC_ZSOmode."reload_completed && rx_match_ccmode (insn, CC_ZSmode)""@abs\t%0abs\t%1, %0"[(set_attr "length" "2,3")])(define_expand "addsi3"[(parallel [(set (match_operand:SI 0 "register_operand" "")(plus:SI (match_operand:SI 1 "register_operand" "")(match_operand:SI 2 "rx_source_operand" "")))(clobber (reg:CC CC_REG))])]"""operands[0] = rx_maybe_pidify_operand (operands[0], 1);operands[1] = rx_maybe_pidify_operand (operands[1], 1);operands[2] = rx_maybe_pidify_operand (operands[2], 1);")(define_insn "addsi3_internal"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r,r,r,r,r,r")(plus:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,0,r,r,r,r,r,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,NEGint4,Sint08,Sint16,Sint24,i,0,r,Sint08,Sint16,Sint24,i,Q")))(clobber (reg:CC CC_REG))]"""@add\t%2, %0add\t%2, %0sub\t%N2, %0add\t%2, %0add\t%2, %0add\t%2, %0add\t%2, %0add\t%1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,11,11,11,11,11,11,11,11,33")(set_attr "length" "2,2,2,3,4,5,6,2,3,3,4,5,6,5")])(define_insn "*addsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r,r,r,r,r,r")(plus:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,0,r,r,r,r,r,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,NEGint4,Sint08,Sint16,Sint24,i,0,r,Sint08,Sint16,Sint24,i,Q")))(set (reg CC_REG)(compare (plus:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSCmode)""@add\t%2, %0add\t%2, %0sub\t%N2, %0add\t%2, %0add\t%2, %0add\t%2, %0add\t%2, %0add\t%1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%2, %1, %0add\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,11,11,11,11,11,11,11,11,33")(set_attr "length" "2,2,2,3,4,5,6,2,3,3,4,5,6,5")]);; A helper to expand the above with the CC_MODE filled in.(define_expand "addsi3_flags"[(parallel [(set (match_operand:SI 0 "register_operand")(plus:SI (match_operand:SI 1 "register_operand")(match_operand:SI 2 "rx_source_operand")))(set (reg:CC_ZSC CC_REG)(compare:CC_ZSC (plus:SI (match_dup 1) (match_dup 2))(const_int 0)))])])(define_insn "adc_internal"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(plus:SI(plus:SI(ltu:SI (reg:CC CC_REG) (const_int 0))(match_operand:SI 1 "register_operand" "%0,0,0,0,0,0"))(match_operand:SI 2 "rx_source_operand" "r,Sint08,Sint16,Sint24,i,Q")))(clobber (reg:CC CC_REG))]"reload_completed""adc\t%2, %0"[(set_attr "timings" "11,11,11,11,11,33")(set_attr "length" "3,4,5,6,7,6")])(define_insn "*adc_flags"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(plus:SI(plus:SI(ltu:SI (reg:CC CC_REG) (const_int 0))(match_operand:SI 1 "register_operand" "%0,0,0,0,0,0"))(match_operand:SI 2 "rx_source_operand" "r,Sint08,Sint16,Sint24,i,Q")))(set (reg CC_REG)(compare(plus:SI(plus:SI(ltu:SI (reg:CC CC_REG) (const_int 0))(match_dup 1))(match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSCmode)""adc\t%2, %0"[(set_attr "timings" "11,11,11,11,11,33")(set_attr "length" "3,4,5,6,7,6")]);; Peepholes to match:;; (set (reg A) (reg B));; (set (CC) (compare:CC (reg A/reg B) (const_int 0)));; and replace them with the addsi3_flags pattern, using an add;; of zero to copy the register and set the condition code bits.(define_peephole2[(set (match_operand:SI 0 "register_operand")(match_operand:SI 1 "register_operand"))(set (reg:CC CC_REG)(compare:CC (match_dup 0)(const_int 0)))]""[(parallel [(set (match_dup 0)(plus:SI (match_dup 1) (const_int 0)))(set (reg:CC_ZSC CC_REG)(compare:CC_ZSC (plus:SI (match_dup 1) (const_int 0))(const_int 0)))])])(define_peephole2[(set (match_operand:SI 0 "register_operand")(match_operand:SI 1 "register_operand"))(set (reg:CC CC_REG)(compare:CC (match_dup 1)(const_int 0)))]""[(parallel [(set (match_dup 0)(plus:SI (match_dup 1) (const_int 0)))(set (reg:CC_ZSC CC_REG)(compare:CC_ZSC (plus:SI (match_dup 1) (const_int 0))(const_int 0)))])])(define_expand "adddi3"[(set (match_operand:DI 0 "register_operand")(plus:DI (match_operand:DI 1 "register_operand")(match_operand:DI 2 "rx_source_operand")))]""{rtx op0l, op0h, op1l, op1h, op2l, op2h;op0l = gen_lowpart (SImode, operands[0]);op1l = gen_lowpart (SImode, operands[1]);op2l = gen_lowpart (SImode, operands[2]);op0h = gen_highpart (SImode, operands[0]);op1h = gen_highpart (SImode, operands[1]);op2h = gen_highpart_mode (SImode, DImode, operands[2]);emit_insn (gen_adddi3_internal (op0l, op0h, op1l, op2l, op1h, op2h));DONE;})(define_insn_and_split "adddi3_internal"[(set (match_operand:SI 0 "register_operand" "=&r")(plus:SI (match_operand:SI 2 "register_operand" "r")(match_operand:SI 3 "rx_source_operand" "riQ")))(set (match_operand:SI 1 "register_operand" "=r")(plus:SI(plus:SI(ltu:SI (plus:SI (match_dup 2) (match_dup 3)) (match_dup 2))(match_operand:SI 4 "register_operand" "%1"))(match_operand:SI 5 "rx_source_operand" "riQ")))(clobber (match_scratch:SI 6 "=&r"))(clobber (reg:CC CC_REG))]"""#""reload_completed"[(const_int 0)]{rtx op0l = operands[0];rtx op0h = operands[1];rtx op1l = operands[2];rtx op2l = operands[3];rtx op1h = operands[4];rtx op2h = operands[5];rtx scratch = operands[6];rtx x;if (reg_overlap_mentioned_p (op0l, op1h)){emit_move_insn (scratch, op0l);op1h = scratch;if (reg_overlap_mentioned_p (op0l, op2h))op2h = scratch;}else if (reg_overlap_mentioned_p (op0l, op2h)){emit_move_insn (scratch, op0l);op2h = scratch;}if (rtx_equal_p (op0l, op1l));/* It is preferable that op0l == op1l... */else if (rtx_equal_p (op0l, op2l))x = op1l, op1l = op2l, op2l = x;/* ... but it is only a requirement if op2l == MEM. */else if (MEM_P (op2l)){/* Let's hope that we still have a scratch register free. */gcc_assert (op1h != scratch);emit_move_insn (scratch, op2l);op2l = scratch;}emit_insn (gen_addsi3_flags (op0l, op1l, op2l));if (rtx_equal_p (op0h, op1h));else if (rtx_equal_p (op0h, op2h))x = op1h, op1h = op2h, op2h = x;else{emit_move_insn (op0h, op1h);op1h = op0h;}emit_insn (gen_adc_internal (op0h, op1h, op2h));DONE;})(define_insn "andsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r")(and:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,r,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,Sint08,Sint16,Sint24,i,0,r,Q")))(clobber (reg:CC CC_REG))]"""@and\t%2, %0and\t%2, %0and\t%2, %0and\t%2, %0and\t%2, %0and\t%2, %0and\t%1, %0and\t%2, %1, %0and\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,11,11,11,33")(set_attr "length" "2,2,3,4,5,6,2,5,5")])(define_insn "*andsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r")(and:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,r,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,Sint08,Sint16,Sint24,i,0,r,Q")))(set (reg CC_REG)(compare (and:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""@and\t%2, %0and\t%2, %0and\t%2, %0and\t%2, %0and\t%2, %0and\t%2, %0and\t%1, %0and\t%2, %1, %0and\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,11,11,11,33")(set_attr "length" "2,2,3,4,5,6,2,5,5")]);; Byte swap (single 32-bit value).(define_insn "bswapsi2"[(set (match_operand:SI 0 "register_operand" "=r")(bswap:SI (match_operand:SI 1 "register_operand" "r")))]"""revl\t%1, %0"[(set_attr "length" "3")]);; Byte swap (single 16-bit value). Note - we ignore the swapping of the high 16-bits.(define_insn "bswaphi2"[(set (match_operand:HI 0 "register_operand" "=r")(bswap:HI (match_operand:HI 1 "register_operand" "r")))]"""revw\t%1, %0"[(set_attr "length" "3")])(define_insn "divsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(div:SI (match_operand:SI 1 "register_operand" "0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand" "r,Sint08,Sint16,Sint24,i,Q")))(clobber (reg:CC CC_REG))]"""div\t%Q2, %0"[(set_attr "timings" "1111") ;; Strictly speaking the timing should be;; 2222, but that is a worst case sceanario.(set_attr "length" "3,4,5,6,7,6")])(define_insn "udivsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(udiv:SI (match_operand:SI 1 "register_operand" "0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand" "r,Sint08,Sint16,Sint24,i,Q")))(clobber (reg:CC CC_REG))]"""divu\t%Q2, %0"[(set_attr "timings" "1010") ;; Strictly speaking the timing should be;; 2020, but that is a worst case sceanario.(set_attr "length" "3,4,5,6,7,6")]);; Note - these patterns are suppressed in big-endian mode because they;; generate a little endian result. ie the most significant word of the;; result is placed in the higher numbered register of the destination;; register pair.(define_insn "mulsidi3"[(set (match_operand:DI 0 "register_operand" "=r,r,r,r,r,r")(mult:DI (sign_extend:DI (match_operand:SI1 "register_operand" "%0,0,0,0,0,0"))(sign_extend:DI (match_operand:SI2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q"))))]"! TARGET_BIG_ENDIAN_DATA""emul\t%Q2, %0"[(set_attr "length" "3,4,5,6,7,6")(set_attr "timings" "22,22,22,22,22,44")]);; See comment for mulsidi3.;; Note - the zero_extends are to distinguish this pattern from the;; mulsidi3 pattern. Immediate mode addressing is not supported;; because gcc cannot handle the expression: (zero_extend (const_int)).(define_insn "umulsidi3"[(set (match_operand:DI 0 "register_operand" "=r,r")(mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "%0,0"))(zero_extend:DI (match_operand:SI 2 "rx_compare_operand" "r,Q"))))]"! TARGET_BIG_ENDIAN_DATA""emulu\t%Q2, %0"[(set_attr "length" "3,6")(set_attr "timings" "22,44")])(define_insn "smaxsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(smax:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))]"""max\t%Q2, %0"[(set_attr "length" "3,4,5,6,7,6")(set_attr "timings" "11,11,11,11,11,33")])(define_insn "sminsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(smin:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))]"""min\t%Q2, %0"[(set_attr "length" "3,4,5,6,7,6")(set_attr "timings" "11,11,11,11,11,33")])(define_insn "umax<small_int_modes:mode>3_u"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(smax:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")(zero_extend:SI (match_operand:small_int_modes 2 "rx_minmaxex_operand""r,Sint08,Sint16,Sint24,i,Q"))))]"""max\t%R2, %0"[(set_attr "length" "3,4,5,6,7,6")(set_attr "timings" "11,11,11,11,11,33")])(define_insn "umin<small_int_modes:mode>3_ur"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(smin:SI (zero_extend:SI (match_operand:small_int_modes 2 "rx_minmaxex_operand""r,Sint08,Sint16,Sint24,i,Q"))(match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")))]"""min\t%R2, %0"[(set_attr "length" "3,4,5,6,7,6")(set_attr "timings" "11,11,11,11,11,33")])(define_insn "umax<small_int_modes:mode>3_ur"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(smax:SI (zero_extend:SI (match_operand:small_int_modes 2 "rx_minmaxex_operand""r,Sint08,Sint16,Sint24,i,Q"))(match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")))]"""max\t%R2, %0"[(set_attr "length" "3,4,5,6,7,6")(set_attr "timings" "11,11,11,11,11,33")])(define_expand "umax<small_int_modes:mode>3"[(set (match_dup 4)(zero_extend:SI (match_operand:small_int_modes 1 "register_operand" "%0,0,0,0,0,0")))(set (match_dup 3)(smax:SI (match_dup 4)(match_operand:small_int_modes 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))(set (match_operand:small_int_modes 0 "register_operand" "=r,r,r,r,r,r")(match_dup 6))]"""operands[3] = gen_reg_rtx (SImode);operands[4] = gen_reg_rtx (SImode);operands[5] = gen_reg_rtx (SImode);operands[6] = gen_rtx_SUBREG (GET_MODE (operands[0]), operands[3],TARGET_BIG_ENDIAN_DATA ? (GET_MODE (operands[0]) == HImode ? 2 : 3) : 0);if (GET_CODE (operands[2]) != CONST_INT){emit_move_insn (operands[5], gen_rtx_ZERO_EXTEND (SImode, operands[2]));operands[2] = operands[5];}")(define_expand "umin<small_int_modes:mode>3"[(set (match_dup 4)(zero_extend:SI (match_operand:small_int_modes 1 "register_operand" "%0,0,0,0,0,0")))(set (match_dup 3)(smin:SI (match_dup 4)(match_operand:small_int_modes 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))(set (match_operand:small_int_modes 0 "register_operand" "=r,r,r,r,r,r")(match_dup 6))]"""operands[3] = gen_reg_rtx (SImode);operands[4] = gen_reg_rtx (SImode);operands[5] = gen_reg_rtx (SImode);operands[6] = gen_rtx_SUBREG (GET_MODE (operands[0]), operands[3],TARGET_BIG_ENDIAN_DATA ? (GET_MODE (operands[0]) == HImode ? 2 : 3) : 0);if (GET_CODE (operands[2]) != CONST_INT){emit_move_insn (operands[5], gen_rtx_ZERO_EXTEND (SImode, operands[2]));operands[2] = operands[5];}")(define_insn "mulsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r")(mult:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,0,r,r")(match_operand:SI 2 "rx_source_operand""r,Uint04,Sint08,Sint16,Sint24,i,Q,0,r")))]"""@mul\t%2, %0mul\t%2, %0mul\t%2, %0mul\t%2, %0mul\t%2, %0mul\t%Q2, %0mul\t%Q2, %0mul\t%1, %0mul\t%2, %1, %0"[(set_attr "length" "2,2,3,4,5,6,5,2,3")(set_attr "timings" "11,11,11,11,11,11,33,11,11")])(define_insn "negsi2"[(set (match_operand:SI 0 "register_operand" "=r,r")(neg:SI (match_operand:SI 1 "register_operand" "0,r")))(clobber (reg:CC CC_REG))]"""@neg\t%0neg\t%1, %0"[(set_attr "length" "2,3")]);; Note that the O and C flags are not set as per a normal compare,;; and thus are unusable in that context.(define_insn "*negsi2_flags"[(set (match_operand:SI 0 "register_operand" "=r,r")(neg:SI (match_operand:SI 1 "register_operand" "0,r")))(set (reg CC_REG)(compare (neg:SI (match_dup 1))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""@neg\t%0neg\t%1, %0"[(set_attr "length" "2,3")])(define_insn "one_cmplsi2"[(set (match_operand:SI 0 "register_operand" "=r,r")(not:SI (match_operand:SI 1 "register_operand" "0,r")))(clobber (reg:CC CC_REG))]"""@not\t%0not\t%1, %0"[(set_attr "length" "2,3")])(define_insn "*one_cmplsi2_flags"[(set (match_operand:SI 0 "register_operand" "=r,r")(not:SI (match_operand:SI 1 "register_operand" "0,r")))(set (reg CC_REG)(compare (not:SI (match_dup 1))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""@not\t%0not\t%1, %0"[(set_attr "length" "2,3")])(define_insn "iorsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r")(ior:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,r,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,Sint08,Sint16,Sint24,i,0,r,Q")))(clobber (reg:CC CC_REG))]"""@or\t%2, %0or\t%2, %0or\t%2, %0or\t%2, %0or\t%2, %0or\t%Q2, %0or\t%1, %0or\t%2, %1, %0or\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,11,11,11,33")(set_attr "length" "2,2,3,4,5,6,2,3,5")])(define_insn "*iorsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r,r,r")(ior:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0,r,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,Sint08,Sint16,Sint24,i,0,r,Q")))(set (reg CC_REG)(compare (ior:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""@or\t%2, %0or\t%2, %0or\t%2, %0or\t%2, %0or\t%2, %0or\t%Q2, %0or\t%1, %0or\t%2, %1, %0or\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,11,11,11,33")(set_attr "length" "2,2,3,4,5,6,2,3,5")])(define_insn "rotlsi3"[(set (match_operand:SI 0 "register_operand" "=r")(rotate:SI (match_operand:SI 1 "register_operand" "0")(match_operand:SI 2 "rx_shift_operand" "rn")))(clobber (reg:CC CC_REG))]"""rotl\t%2, %0"[(set_attr "length" "3")])(define_insn "*rotlsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r")(rotate:SI (match_operand:SI 1 "register_operand" "0")(match_operand:SI 2 "rx_shift_operand" "rn")))(set (reg CC_REG)(compare (rotate:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""rotl\t%2, %0"[(set_attr "length" "3")])(define_insn "rotrsi3"[(set (match_operand:SI 0 "register_operand" "=r")(rotatert:SI (match_operand:SI 1 "register_operand" "0")(match_operand:SI 2 "rx_shift_operand" "rn")))(clobber (reg:CC CC_REG))]"""rotr\t%2, %0"[(set_attr "length" "3")])(define_insn "*rotrsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r")(rotatert:SI (match_operand:SI 1 "register_operand" "0")(match_operand:SI 2 "rx_shift_operand" "rn")))(set (reg CC_REG)(compare (rotatert:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""rotr\t%2, %0"[(set_attr "length" "3")])(define_insn "ashrsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(ashiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r")(match_operand:SI 2 "rx_shift_operand" "r,n,n")))(clobber (reg:CC CC_REG))]"""@shar\t%2, %0shar\t%2, %0shar\t%2, %1, %0"[(set_attr "length" "3,2,3")])(define_insn "*ashrsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(ashiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r")(match_operand:SI 2 "rx_shift_operand" "r,n,n")))(set (reg CC_REG)(compare (ashiftrt:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""@shar\t%2, %0shar\t%2, %0shar\t%2, %1, %0"[(set_attr "length" "3,2,3")])(define_insn "lshrsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(lshiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r")(match_operand:SI 2 "rx_shift_operand" "r,n,n")))(clobber (reg:CC CC_REG))]"""@shlr\t%2, %0shlr\t%2, %0shlr\t%2, %1, %0"[(set_attr "length" "3,2,3")])(define_insn "*lshrsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(lshiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r")(match_operand:SI 2 "rx_shift_operand" "r,n,n")))(set (reg CC_REG)(compare (lshiftrt:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""@shlr\t%2, %0shlr\t%2, %0shlr\t%2, %1, %0"[(set_attr "length" "3,2,3")])(define_insn "ashlsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(ashift:SI (match_operand:SI 1 "register_operand" "0,0,r")(match_operand:SI 2 "rx_shift_operand" "r,n,n")))(clobber (reg:CC CC_REG))]"""@shll\t%2, %0shll\t%2, %0shll\t%2, %1, %0"[(set_attr "length" "3,2,3")])(define_insn "*ashlsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r,r,r")(ashift:SI (match_operand:SI 1 "register_operand" "0,0,r")(match_operand:SI 2 "rx_shift_operand" "r,n,n")))(set (reg CC_REG)(compare (ashift:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""@shll\t%2, %0shll\t%2, %0shll\t%2, %1, %0"[(set_attr "length" "3,2,3")]);; Saturate to 32-bits(define_insn_and_split "ssaddsi3"[(set (match_operand:SI 0 "register_operand" "=r")(ss_plus:SI (match_operand:SI 1 "register_operand" "r")(match_operand:SI 2 "rx_source_operand" "riQ")))(clobber (reg:CC CC_REG))]"""#""reload_completed"[(parallel [(set (match_dup 0)(plus:SI (match_dup 1) (match_dup 2)))(set (reg:CC_ZSC CC_REG)(compare:CC_ZSC(plus:SI (match_dup 1) (match_dup 2))(const_int 0)))])(set (match_dup 0)(unspec:SI [(match_dup 0) (reg:CC CC_REG)]UNSPEC_BUILTIN_SAT))]"")(define_insn "*sat"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(match_operand:SI 1 "register_operand" "0")(reg:CC CC_REG)]UNSPEC_BUILTIN_SAT))]"reload_completed""sat\t%0"[(set_attr "length" "2")])(define_insn "subsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r")(minus:SI (match_operand:SI 1 "register_operand" "0,0,0,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,n,r,Q")))(clobber (reg:CC CC_REG))]"""@sub\t%2, %0sub\t%2, %0add\t%N2, %0sub\t%2, %1, %0sub\t%Q2, %0"[(set_attr "timings" "11,11,11,11,33")(set_attr "length" "2,2,6,3,5")]);; Note that the O flag is set as if (compare op1 op2) not for;; what is described here, (compare op0 0).(define_insn "*subsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r")(minus:SI (match_operand:SI 1 "register_operand" "0,0,0,r,0")(match_operand:SI 2 "rx_source_operand" "r,Uint04,n,r,Q")))(set (reg CC_REG)(compare (minus:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSCmode)""@sub\t%2, %0sub\t%2, %0add\t%N2, %0sub\t%2, %1, %0sub\t%Q2, %0"[(set_attr "timings" "11,11,11,11,33")(set_attr "length" "2,2,6,3,5")]);; A helper to expand the above with the CC_MODE filled in.(define_expand "subsi3_flags"[(parallel [(set (match_operand:SI 0 "register_operand")(minus:SI (match_operand:SI 1 "register_operand")(match_operand:SI 2 "rx_source_operand")))(set (reg:CC_ZSC CC_REG)(compare:CC_ZSC (minus:SI (match_dup 1) (match_dup 2))(const_int 0)))])])(define_insn "sbb_internal"[(set (match_operand:SI 0 "register_operand" "=r,r")(minus:SI(minus:SI(match_operand:SI 1 "register_operand" " 0,0")(match_operand:SI 2 "rx_compare_operand" " r,Q"))(geu:SI (reg:CC CC_REG) (const_int 0))))(clobber (reg:CC CC_REG))]"reload_completed""sbb\t%2, %0"[(set_attr "timings" "11,33")(set_attr "length" "3,6")])(define_insn "*sbb_flags"[(set (match_operand:SI 0 "register_operand" "=r,r")(minus:SI(minus:SI(match_operand:SI 1 "register_operand" " 0,0")(match_operand:SI 2 "rx_compare_operand" " r,Q"))(geu:SI (reg:CC CC_REG) (const_int 0))))(set (reg CC_REG)(compare(minus:SI(minus:SI (match_dup 1) (match_dup 2))(geu:SI (reg:CC CC_REG) (const_int 0)))(const_int 0)))]"reload_completed""sbb\t%2, %0"[(set_attr "timings" "11,33")(set_attr "length" "3,6")])(define_expand "subdi3"[(set (match_operand:DI 0 "register_operand")(minus:DI (match_operand:DI 1 "register_operand")(match_operand:DI 2 "rx_compare_operand")))]""{rtx op0l, op0h, op1l, op1h, op2l, op2h;op0l = gen_lowpart (SImode, operands[0]);op1l = gen_lowpart (SImode, operands[1]);op2l = gen_lowpart (SImode, operands[2]);op0h = gen_highpart (SImode, operands[0]);op1h = gen_highpart (SImode, operands[1]);op2h = gen_highpart_mode (SImode, DImode, operands[2]);emit_insn (gen_subdi3_internal (op0l, op0h, op1l, op2l, op1h, op2h));DONE;})(define_insn_and_split "subdi3_internal"[(set (match_operand:SI 0 "register_operand" "=&r,&r")(minus:SI (match_operand:SI 2 "register_operand" " 0, r")(match_operand:SI 3 "rx_compare_operand" "rQ, r")))(set (match_operand:SI 1 "register_operand" "= r, r")(minus:SI(minus:SI(match_operand:SI 4 "register_operand" " 1, 1")(match_operand:SI 5 "rx_compare_operand" " rQ,rQ"))(geu:SI (match_dup 2) (match_dup 3))))(clobber (reg:CC CC_REG))]"""#""reload_completed"[(const_int 0)]{emit_insn (gen_subsi3_flags (operands[0], operands[2], operands[3]));emit_insn (gen_sbb_internal (operands[1], operands[4], operands[5]));DONE;})(define_insn "xorsi3"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(xor:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))(clobber (reg:CC CC_REG))]"""xor\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,33")(set_attr "length" "3,4,5,6,7,6")])(define_insn "*xorsi3_flags"[(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r")(xor:SI (match_operand:SI 1 "register_operand" "%0,0,0,0,0,0")(match_operand:SI 2 "rx_source_operand""r,Sint08,Sint16,Sint24,i,Q")))(set (reg CC_REG)(compare (xor:SI (match_dup 1) (match_dup 2))(const_int 0)))]"reload_completed && rx_match_ccmode (insn, CC_ZSmode)""xor\t%Q2, %0"[(set_attr "timings" "11,11,11,11,11,33")(set_attr "length" "3,4,5,6,7,6")]);; A set of peepholes to catch extending loads followed by arithmetic operations.;; We use iterators where possible to reduce the amount of typing and hence the;; possibilities for typos.(define_code_iterator extend_types [(zero_extend "") (sign_extend "")])(define_code_attr letter [(zero_extend "R") (sign_extend "Q")])(define_code_iterator memex_commutative [(plus "") (and "") (ior "") (xor "")])(define_code_iterator memex_noncomm [(div "") (udiv "") (minus "")])(define_code_iterator memex_nocc [(smax "") (smin "") (mult "")])(define_code_attr op [(plus "add") (and "and") (div "div") (udiv "divu") (smax "max") (smin "min") (mult "mul") (ior "or") (minus "sub") (xor "xor")])(define_peephole2[(set (match_operand:SI 0 "register_operand")(extend_types:SI (match_operand:small_int_modes 1 "rx_restricted_mem_operand")))(parallel [(set (match_operand:SI 2 "register_operand")(memex_commutative:SI (match_dup 0)(match_dup 2)))(clobber (reg:CC CC_REG))])]"peep2_regno_dead_p (2, REGNO (operands[0])) && (optimize < 3 || optimize_size)"[(parallel [(set:SI (match_dup 2)(memex_commutative:SI (match_dup 2)(extend_types:SI (match_dup 1))))(clobber (reg:CC CC_REG))])])(define_peephole2[(set (match_operand:SI 0 "register_operand")(extend_types:SI (match_operand:small_int_modes 1 "rx_restricted_mem_operand")))(parallel [(set (match_operand:SI 2 "register_operand")(memex_commutative:SI (match_dup 2)(match_dup 0)))(clobber (reg:CC CC_REG))])]"peep2_regno_dead_p (2, REGNO (operands[0])) && (optimize < 3 || optimize_size)"[(parallel [(set:SI (match_dup 2)(memex_commutative:SI (match_dup 2)(extend_types:SI (match_dup 1))))(clobber (reg:CC CC_REG))])])(define_peephole2[(set (match_operand:SI 0 "register_operand")(extend_types:SI (match_operand:small_int_modes 1 "rx_restricted_mem_operand")))(parallel [(set (match_operand:SI 2 "register_operand")(memex_noncomm:SI (match_dup 2)(match_dup 0)))(clobber (reg:CC CC_REG))])]"peep2_regno_dead_p (2, REGNO (operands[0])) && (optimize < 3 || optimize_size)"[(parallel [(set:SI (match_dup 2)(memex_noncomm:SI (match_dup 2)(extend_types:SI (match_dup 1))))(clobber (reg:CC CC_REG))])])(define_peephole2[(set (match_operand:SI 0 "register_operand")(extend_types:SI (match_operand:small_int_modes 1 "rx_restricted_mem_operand")))(set (match_operand:SI 2 "register_operand")(memex_nocc:SI (match_dup 0)(match_dup 2)))]"peep2_regno_dead_p (2, REGNO (operands[0])) && (optimize < 3 || optimize_size)"[(set:SI (match_dup 2)(memex_nocc:SI (match_dup 2)(extend_types:SI (match_dup 1))))])(define_peephole2[(set (match_operand:SI 0 "register_operand")(extend_types:SI (match_operand:small_int_modes 1 "rx_restricted_mem_operand")))(set (match_operand:SI 2 "register_operand")(memex_nocc:SI (match_dup 2)(match_dup 0)))]"peep2_regno_dead_p (2, REGNO (operands[0])) && (optimize < 3 || optimize_size)"[(set:SI (match_dup 2)(memex_nocc:SI (match_dup 2)(extend_types:SI (match_dup 1))))])(define_insn "<memex_commutative:code>si3_<extend_types:code><small_int_modes:mode>"[(set (match_operand:SI 0 "register_operand" "=r")(memex_commutative:SI (match_operand:SI 1 "register_operand" "%0")(extend_types:SI (match_operand:small_int_modes 2 "rx_restricted_mem_operand" "Q"))))(clobber (reg:CC CC_REG))]"(optimize < 3 || optimize_size)""<memex_commutative:op>\t%<extend_types:letter>2, %0"[(set_attr "timings" "33")(set_attr "length" "5")] ;; This length is corrected in rx_adjust_insn_length)(define_insn "<memex_noncomm:code>si3_<extend_types:code><small_int_modes:mode>"[(set (match_operand:SI 0 "register_operand" "=r")(memex_noncomm:SI (match_operand:SI 1 "register_operand" "0")(extend_types:SI (match_operand:small_int_modes 2 "rx_restricted_mem_operand" "Q"))))(clobber (reg:CC CC_REG))]"(optimize < 3 || optimize_size)""<memex_noncomm:op>\t%<extend_types:letter>2, %0"[(set_attr "timings" "33")(set_attr "length" "5")] ;; This length is corrected in rx_adjust_insn_length)(define_insn "<memex_nocc:code>si3_<extend_types:code><small_int_modes:mode>"[(set (match_operand:SI 0 "register_operand" "=r")(memex_nocc:SI (match_operand:SI 1 "register_operand" "%0")(extend_types:SI (match_operand:small_int_modes 2 "rx_restricted_mem_operand" "Q"))))]"(optimize < 3 || optimize_size)""<memex_nocc:op>\t%<extend_types:letter>2, %0"[(set_attr "timings" "33")(set_attr "length" "5")] ;; This length is corrected in rx_adjust_insn_length)(define_peephole2[(set (match_operand:SI 0 "register_operand")(extend_types:SI (match_operand:small_int_modes 1 "rx_restricted_mem_operand")))(set (reg:CC CC_REG)(compare:CC (match_operand:SI 2 "register_operand")(match_dup 0)))]"peep2_regno_dead_p (2, REGNO (operands[0])) && (optimize < 3 || optimize_size)"[(set (reg:CC CC_REG)(compare:CC (match_dup 2)(extend_types:SI (match_dup 1))))]);; Convert:;; (set (reg1) (sign_extend (mem));; (set (reg2) (zero_extend (reg1));; into;; (set (reg2) (zero_extend (mem)))(define_peephole2[(set (match_operand:SI 0 "register_operand")(sign_extend:SI (match_operand:small_int_modes 1 "memory_operand")))(set (match_operand:SI 2 "register_operand")(zero_extend:SI (match_operand:small_int_modes 3 "register_operand")))]"REGNO (operands[0]) == REGNO (operands[3])&& (REGNO (operands[0]) == REGNO (operands[2])|| peep2_regno_dead_p (2, REGNO (operands[0])))"[(set (match_dup 2)(zero_extend:SI (match_dup 1)))]);; Remove the redundant sign extension from:;; (set (reg) (extend (mem)));; (set (reg) (extend (reg)))(define_peephole2[(set (match_operand:SI 0 "register_operand")(extend_types:SI (match_operand:small_int_modes 1 "memory_operand")))(set (match_dup 0)(extend_types:SI (match_operand:small_int_modes 2 "register_operand")))]"REGNO (operands[0]) == REGNO (operands[2])"[(set (match_dup 0) (extend_types:SI (match_dup 1)))])(define_insn "comparesi3_<extend_types:code><small_int_modes:mode>"[(set (reg:CC CC_REG)(compare:CC (match_operand:SI 0 "register_operand" "=r")(extend_types:SI (match_operand:small_int_modes 1 "rx_restricted_mem_operand" "Q"))))]"(optimize < 3 || optimize_size)""cmp\t%<extend_types:letter>1, %0"[(set_attr "timings" "33")(set_attr "length" "5")] ;; This length is corrected in rx_adjust_insn_length);; Floating Point Instructions(define_insn "addsf3"[(set (match_operand:SF 0 "register_operand" "=r,r,r")(plus:SF (match_operand:SF 1 "register_operand" "%0,0,0")(match_operand:SF 2 "rx_source_operand" "r,F,Q")))(clobber (reg:CC CC_REG))]"ALLOW_RX_FPU_INSNS""fadd\t%2, %0"[(set_attr "timings" "44,44,66")(set_attr "length" "3,7,5")])(define_insn "divsf3"[(set (match_operand:SF 0 "register_operand" "=r,r,r")(div:SF (match_operand:SF 1 "register_operand" "0,0,0")(match_operand:SF 2 "rx_source_operand" "r,F,Q")))(clobber (reg:CC CC_REG))]"ALLOW_RX_FPU_INSNS""fdiv\t%2, %0"[(set_attr "timings" "1616,1616,1818")(set_attr "length" "3,7,5")])(define_insn "mulsf3"[(set (match_operand:SF 0 "register_operand" "=r,r,r")(mult:SF (match_operand:SF 1 "register_operand" "%0,0,0")(match_operand:SF 2 "rx_source_operand" "r,F,Q")))(clobber (reg:CC CC_REG))]"ALLOW_RX_FPU_INSNS""fmul\t%2, %0"[(set_attr "timings" "33,33,55")(set_attr "length" "3,7,5")])(define_insn "subsf3"[(set (match_operand:SF 0 "register_operand" "=r,r,r")(minus:SF (match_operand:SF 1 "register_operand" "0,0,0")(match_operand:SF 2 "rx_source_operand" "r,F,Q")))(clobber (reg:CC CC_REG))]"ALLOW_RX_FPU_INSNS""fsub\t%Q2, %0"[(set_attr "timings" "44,44,66")(set_attr "length" "3,7,5")])(define_insn "fix_truncsfsi2"[(set (match_operand:SI 0 "register_operand" "=r,r")(fix:SI (match_operand:SF 1 "rx_compare_operand" "r,Q")))(clobber (reg:CC CC_REG))]"ALLOW_RX_FPU_INSNS""ftoi\t%Q1, %0"[(set_attr "timings" "22,44")(set_attr "length" "3,5")])(define_insn "floatsisf2"[(set (match_operand:SF 0 "register_operand" "=r,r")(float:SF (match_operand:SI 1 "rx_compare_operand" "r,Q")))(clobber (reg:CC CC_REG))]"ALLOW_RX_FPU_INSNS""itof\t%Q1, %0"[(set_attr "timings" "22,44")(set_attr "length" "3,6")]);; Bit manipulation instructions.;; ??? The *_in_memory patterns will not be matched without further help.;; At one time we had the insv expander generate them, but I suspect that;; in general we get better performance by exposing the register load to;; the optimizers.;;;; An alternate solution would be to re-organize these patterns such;; that allow both register and memory operands. This would allow the;; register allocator to spill and not load the register operand. This;; would be possible only for operations for which we have a constant;; bit offset, so that we can adjust the address by ofs/8 and replace;; the offset in the insn by ofs%8.(define_insn "*bitset"[(set (match_operand:SI 0 "register_operand" "=r")(ior:SI (ashift:SI (const_int 1)(match_operand:SI 1 "rx_shift_operand" "ri"))(match_operand:SI 2 "register_operand" "0")))]"""bset\t%1, %0"[(set_attr "length" "3")])(define_insn "*bitset_in_memory"[(set (match_operand:QI 0 "rx_restricted_mem_operand" "+Q")(ior:QI (ashift:QI (const_int 1)(match_operand:QI 1 "nonmemory_operand" "ri"))(match_dup 0)))]"""bset\t%1, %0.B"[(set_attr "length" "3")(set_attr "timings" "33")])(define_insn "*bitinvert"[(set (match_operand:SI 0 "register_operand" "=r")(xor:SI (ashift:SI (const_int 1)(match_operand:SI 1 "rx_shift_operand" "ri"))(match_operand:SI 2 "register_operand" "0")))]"""bnot\t%1, %0"[(set_attr "length" "3")])(define_insn "*bitinvert_in_memory"[(set (match_operand:QI 0 "rx_restricted_mem_operand" "+Q")(xor:QI (ashift:QI (const_int 1)(match_operand:QI 1 "nonmemory_operand" "ri"))(match_dup 0)))]"""bnot\t%1, %0.B"[(set_attr "length" "5")(set_attr "timings" "33")])(define_insn "*bitclr"[(set (match_operand:SI 0 "register_operand" "=r")(and:SI (not:SI(ashift:SI(const_int 1)(match_operand:SI 1 "rx_shift_operand" "ri")))(match_operand:SI 2 "register_operand" "0")))]"""bclr\t%1, %0"[(set_attr "length" "3")])(define_insn "*bitclr_in_memory"[(set (match_operand:QI 0 "rx_restricted_mem_operand" "+Q")(and:QI (not:QI(ashift:QI(const_int 1)(match_operand:QI 1 "nonmemory_operand" "ri")))(match_dup 0)))]"""bclr\t%1, %0.B"[(set_attr "length" "3")(set_attr "timings" "33")])(define_insn "*insv_imm"[(set (zero_extract:SI(match_operand:SI 0 "register_operand" "+r")(const_int 1)(match_operand:SI 1 "rx_shift_operand" "ri"))(match_operand:SI 2 "const_int_operand" ""))]""{if (INTVAL (operands[2]) & 1)return "bset\t%1, %0";elsereturn "bclr\t%1, %0";}[(set_attr "length" "3")])(define_insn_and_split "rx_insv_reg"[(set (zero_extract:SI(match_operand:SI 0 "register_operand" "+r")(const_int 1)(match_operand:SI 1 "const_int_operand" ""))(match_operand:SI 2 "register_operand" "r"))(clobber (reg:CC CC_REG))]"""#""reload_completed"[(set (zero_extract:SI (match_dup 0) (const_int 1) (match_dup 1))(match_dup 3))]{rtx flags, x;/* Emit tst #1, op2. */flags = gen_rtx_REG (CC_ZSmode, CC_REG);x = gen_rtx_AND (SImode, operands[2], const1_rtx);x = gen_rtx_COMPARE (CC_ZSmode, x, const0_rtx);x = gen_rtx_SET (VOIDmode, flags, x);emit_insn (x);/* Emit bmne. */operands[3] = gen_rtx_NE (SImode, flags, const0_rtx);})(define_insn_and_split "*insv_cond"[(set (zero_extract:SI(match_operand:SI 0 "register_operand" "+r")(const_int 1)(match_operand:SI 1 "const_int_operand" ""))(match_operator:SI 4 "comparison_operator"[(match_operand:SI 2 "register_operand" "r")(match_operand:SI 3 "rx_source_operand" "riQ")]))(clobber (reg:CC CC_REG))]"""#""reload_completed"[(set (zero_extract:SI (match_dup 0) (const_int 1) (match_dup 1))(match_dup 4))]{rtx flags, x;flags = gen_rtx_REG (CCmode, CC_REG);x = gen_rtx_COMPARE (CCmode, operands[2], operands[3]);x = gen_rtx_SET (VOIDmode, flags, x);emit_insn (x);operands[4] = gen_rtx_fmt_ee (GET_CODE (operands[4]), SImode,flags, const0_rtx);})(define_insn "*bmcc"[(set (zero_extract:SI(match_operand:SI 0 "register_operand" "+r")(const_int 1)(match_operand:SI 1 "const_int_operand" ""))(match_operator:SI 2 "comparison_operator"[(reg CC_REG) (const_int 0)]))]"reload_completed""bm%B2\t%1, %0"[(set_attr "length" "3")]);; Work around the fact that X=Y<0 is preferentially expanded as a shift.(define_insn_and_split "*insv_cond_lt"[(set (zero_extract:SI(match_operand:SI 0 "register_operand" "+r")(const_int 1)(match_operand:SI 1 "const_int_operand" ""))(match_operator:SI 3 "rshift_operator"[(match_operand:SI 2 "register_operand" "r")(const_int 31)]))(clobber (reg:CC CC_REG))]"""#"""[(parallel [(set (zero_extract:SI (match_dup 0) (const_int 1) (match_dup 1))(lt:SI (match_dup 2) (const_int 0)))(clobber (reg:CC CC_REG))])]"")(define_expand "insv"[(set (zero_extract:SI(match_operand:SI 0 "register_operand") ;; Destination(match_operand:SI 1 "const_int_operand") ;; # of bits to set(match_operand:SI 2 "nonmemory_operand")) ;; Starting bit(match_operand:SI 3 "nonmemory_operand"))] ;; Bits to insert""{/* We only handle single-bit inserts. */if (!CONST_INT_P (operands[1]) || INTVAL (operands[1]) != 1)FAIL;/* Either the bit to insert or the position must be constant. */if (CONST_INT_P (operands[3]))operands[3] = GEN_INT (INTVAL (operands[3]) & 1);else if (CONST_INT_P (operands[2])){emit_insn (gen_rx_insv_reg (operands[0], operands[2], operands[3]));DONE;}elseFAIL;});; Atomic exchange operation.(define_insn "sync_lock_test_and_setsi"[(set (match_operand:SI 0 "register_operand" "=r,r")(match_operand:SI 1 "rx_compare_operand" "=r,Q"))(set (match_dup 1)(match_operand:SI 2 "register_operand" "0,0"))]"""xchg\t%1, %0"[(set_attr "length" "3,6")(set_attr "timings" "22")]);; Block move functions.(define_expand "movstr"[(set (match_operand:BLK 1 "memory_operand") ;; Dest(match_operand:BLK 2 "memory_operand")) ;; Source(use (match_operand:SI 0 "register_operand")) ;; Updated Dest]""{rtx addr1 = gen_rtx_REG (SImode, 1);rtx addr2 = gen_rtx_REG (SImode, 2);rtx len = gen_rtx_REG (SImode, 3);rtx dest_copy = gen_reg_rtx (SImode);emit_move_insn (len, GEN_INT (-1));emit_move_insn (addr1, force_operand (XEXP (operands[1], 0), NULL_RTX));emit_move_insn (addr2, force_operand (XEXP (operands[2], 0), NULL_RTX));operands[1] = replace_equiv_address_nv (operands[1], addr1);operands[2] = replace_equiv_address_nv (operands[2], addr2);emit_move_insn (dest_copy, addr1);emit_insn (gen_rx_movstr ());emit_move_insn (len, GEN_INT (-1));emit_insn (gen_rx_strend (operands[0], dest_copy));DONE;})(define_insn "rx_movstr"[(set (mem:BLK (reg:SI 1))(mem:BLK (reg:SI 2)))(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_MOVSTR)(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))]"""smovu"[(set_attr "length" "2")(set_attr "timings" "1111")] ;; The timing is a guesstimate.)(define_insn "rx_strend"[(set (match_operand:SI 0 "register_operand" "=r")(unspec_volatile:SI [(match_operand:SI 1 "register_operand" "r")(reg:SI 3)] UNSPEC_STRLEN))(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))(clobber (reg:CC CC_REG))]"""mov\t%1, r1\n\tmov\t#0, r2\n\tsuntil.b\n\tmov\tr1, %0\n\tsub\t#1, %0"[(set_attr "length" "10")(set_attr "timings" "1111")] ;; The timing is a guesstimate.)(define_expand "movmemsi"[(parallel[(set (match_operand:BLK 0 "memory_operand") ;; Dest(match_operand:BLK 1 "memory_operand")) ;; Source(use (match_operand:SI 2 "register_operand")) ;; Length in bytes(match_operand 3 "immediate_operand") ;; Align(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_MOVMEM)])]""{rtx addr1 = gen_rtx_REG (SImode, 1);rtx addr2 = gen_rtx_REG (SImode, 2);rtx len = gen_rtx_REG (SImode, 3);/* Do not use when the source or destination are volatile - the SMOVFinstruction will read and write in word sized blocks, which may beoutside of the valid address range. */if (MEM_P (operands[0]) && MEM_VOLATILE_P (operands[0]))FAIL;if (MEM_P (operands[1]) && MEM_VOLATILE_P (operands[1]))FAIL;if (REG_P (operands[0]) && (REGNO (operands[0]) == 2|| REGNO (operands[0]) == 3))FAIL;if (REG_P (operands[1]) && (REGNO (operands[1]) == 1|| REGNO (operands[1]) == 3))FAIL;if (REG_P (operands[2]) && (REGNO (operands[2]) == 1|| REGNO (operands[2]) == 2))FAIL;emit_move_insn (addr1, force_operand (XEXP (operands[0], 0), NULL_RTX));emit_move_insn (addr2, force_operand (XEXP (operands[1], 0), NULL_RTX));emit_move_insn (len, force_operand (operands[2], NULL_RTX));operands[0] = replace_equiv_address_nv (operands[0], addr1);operands[1] = replace_equiv_address_nv (operands[1], addr2);emit_insn (gen_rx_movmem ());DONE;})(define_insn "rx_movmem"[(set (mem:BLK (reg:SI 1))(mem:BLK (reg:SI 2)))(use (reg:SI 3))(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_MOVMEM)(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))]"""smovf"[(set_attr "length" "2")(set_attr "timings" "1111")] ;; The timing is a guesstimate.)(define_expand "setmemsi"[(set (match_operand:BLK 0 "memory_operand") ;; Dest(match_operand:QI 2 "nonmemory_operand")) ;; Value(use (match_operand:SI 1 "nonmemory_operand")) ;; Length(match_operand 3 "immediate_operand") ;; Align(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_SETMEM)]""{rtx addr = gen_rtx_REG (SImode, 1);rtx val = gen_rtx_REG (QImode, 2);rtx len = gen_rtx_REG (SImode, 3);emit_move_insn (addr, force_operand (XEXP (operands[0], 0), NULL_RTX));emit_move_insn (len, force_operand (operands[1], NULL_RTX));emit_move_insn (val, operands[2]);emit_insn (gen_rx_setmem ());DONE;})(define_insn "rx_setmem"[(set (mem:BLK (reg:SI 1))(unspec_volatile:BLK [(reg:SI 1) (reg:SI 2) (reg:SI 3)] UNSPEC_SETMEM))(clobber (reg:SI 1))(clobber (reg:SI 3))]"""sstr.b"[(set_attr "length" "2")(set_attr "timings" "1111")] ;; The timing is a guesstimate.)(define_expand "cmpstrnsi"[(set (match_operand:SI 0 "register_operand") ;; Result(unspec_volatile:SI [(match_operand:BLK 1 "memory_operand") ;; String1(match_operand:BLK 2 "memory_operand")] ;; String2UNSPEC_CMPSTRN))(use (match_operand:SI 3 "register_operand")) ;; Max Length(match_operand:SI 4 "immediate_operand")] ;; Known Align""{rtx str1 = gen_rtx_REG (SImode, 1);rtx str2 = gen_rtx_REG (SImode, 2);rtx len = gen_rtx_REG (SImode, 3);emit_move_insn (str1, force_operand (XEXP (operands[1], 0), NULL_RTX));emit_move_insn (str2, force_operand (XEXP (operands[2], 0), NULL_RTX));emit_move_insn (len, force_operand (operands[3], NULL_RTX));emit_insn (gen_rx_cmpstrn (operands[0], operands[1], operands[2]));DONE;})(define_expand "cmpstrsi"[(set (match_operand:SI 0 "register_operand") ;; Result(unspec_volatile:SI [(match_operand:BLK 1 "memory_operand") ;; String1(match_operand:BLK 2 "memory_operand")] ;; String2UNSPEC_CMPSTRN))(match_operand:SI 3 "immediate_operand")] ;; Known Align""{rtx str1 = gen_rtx_REG (SImode, 1);rtx str2 = gen_rtx_REG (SImode, 2);rtx len = gen_rtx_REG (SImode, 3);emit_move_insn (str1, force_reg (SImode, XEXP (operands[1], 0)));emit_move_insn (str2, force_reg (SImode, XEXP (operands[2], 0)));emit_move_insn (len, GEN_INT (-1));emit_insn (gen_rx_cmpstrn (operands[0], operands[1], operands[2]));DONE;})(define_insn "rx_cmpstrn"[(set (match_operand:SI 0 "register_operand" "=r")(unspec_volatile:SI [(reg:SI 1) (reg:SI 2) (reg:SI 3)]UNSPEC_CMPSTRN))(use (match_operand:BLK 1 "memory_operand" "m"))(use (match_operand:BLK 2 "memory_operand" "m"))(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))(clobber (reg:CC CC_REG))]"""scmpu ; Perform the string comparisonmov #-1, %0 ; Set up -1 result (which cannot be created; by the SC insn)bnc ?+ ; If Carry is not set skip overscne.L %0 ; Set result based on Z flag?:"[(set_attr "length" "9")(set_attr "timings" "1111")] ;; The timing is a guesstimate.);; Builtin Functions;;;; GCC does not have the ability to generate the following instructions;; on its own so they are provided as builtins instead. To use them from;; a program for example invoke them as __builtin_rx_<insn_name>. For;; example:;;;; int short_byte_swap (int arg) { return __builtin_rx_revw (arg); };;---------- Accumulator Support ------------------------;; Multiply & Accumulate (high)(define_insn "machi"[(unspec:SI [(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_MACHI)]"""machi\t%0, %1"[(set_attr "length" "3")]);; Multiply & Accumulate (low)(define_insn "maclo"[(unspec:SI [(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_MACLO)]"""maclo\t%0, %1"[(set_attr "length" "3")]);; Multiply (high)(define_insn "mulhi"[(unspec:SI [(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_MULHI)]"""mulhi\t%0, %1"[(set_attr "length" "3")]);; Multiply (low)(define_insn "mullo"[(unspec:SI [(match_operand:SI 0 "register_operand" "r")(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_MULLO)]"""mullo\t%0, %1"[(set_attr "length" "3")]);; Move from Accumulator (high)(define_insn "mvfachi"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(const_int 0)]UNSPEC_BUILTIN_MVFACHI))]"""mvfachi\t%0"[(set_attr "length" "3")]);; Move from Accumulator (middle)(define_insn "mvfacmi"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(const_int 0)]UNSPEC_BUILTIN_MVFACMI))]"""mvfacmi\t%0"[(set_attr "length" "3")]);; Move to Accumulator (high)(define_insn "mvtachi"[(unspec_volatile:SI [(match_operand:SI 0 "register_operand" "r")]UNSPEC_BUILTIN_MVTACHI)]"""mvtachi\t%0"[(set_attr "length" "3")]);; Move to Accumulator (low)(define_insn "mvtaclo"[(unspec_volatile:SI [(match_operand:SI 0 "register_operand" "r")]UNSPEC_BUILTIN_MVTACLO)]"""mvtaclo\t%0"[(set_attr "length" "3")]);; Round Accumulator(define_insn "racw"[(unspec_volatile:SI [(match_operand:SI 0 "immediate_operand" "i")]UNSPEC_BUILTIN_RACW)]"""racw\t%0"[(set_attr "length" "3")]);; Repeat multiply and accumulate(define_insn "rmpa"[(unspec:SI [(const_int 0) (reg:SI 1) (reg:SI 2) (reg:SI 3)(reg:SI 4) (reg:SI 5) (reg:SI 6)]UNSPEC_BUILTIN_RMPA)(clobber (reg:SI 1))(clobber (reg:SI 2))(clobber (reg:SI 3))]"""rmpa"[(set_attr "length" "2")(set_attr "timings" "1010")]);;---------- Arithmetic ------------------------;; Byte swap (two 16-bit values).(define_insn "revw"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(match_operand:SI 1 "register_operand" "r")]UNSPEC_BUILTIN_REVW))]"""revw\t%1, %0"[(set_attr "length" "3")]);; Round to integer.(define_insn "lrintsf2"[(set (match_operand:SI 0 "register_operand" "=r,r")(unspec:SI [(match_operand:SF 1 "rx_compare_operand" "r,Q")]UNSPEC_BUILTIN_ROUND))(clobber (reg:CC CC_REG))]"""round\t%1, %0"[(set_attr "timings" "22,44")(set_attr "length" "3,5")]);;---------- Control Registers ------------------------;; Clear Processor Status Word(define_insn "clrpsw"[(unspec_volatile:SI [(match_operand:SI 0 "immediate_operand" "i")]UNSPEC_BUILTIN_CLRPSW)(clobber (reg:CC CC_REG))]"""clrpsw\t%F0"[(set_attr "length" "2")]);; Set Processor Status Word(define_insn "setpsw"[(unspec_volatile:SI [(match_operand:SI 0 "immediate_operand" "i")]UNSPEC_BUILTIN_SETPSW)(clobber (reg:CC CC_REG))]"""setpsw\t%F0"[(set_attr "length" "2")]);; Move from control register(define_insn "mvfc"[(set (match_operand:SI 0 "register_operand" "=r")(unspec_volatile:SI [(match_operand:SI 1 "immediate_operand" "i")]UNSPEC_BUILTIN_MVFC))]"""mvfc\t%C1, %0"[(set_attr "length" "3")]);; Move to control register(define_insn "mvtc"[(unspec_volatile:SI [(match_operand:SI 0 "immediate_operand" "i,i")(match_operand:SI 1 "nonmemory_operand" "r,i")]UNSPEC_BUILTIN_MVTC)]"""mvtc\t%1, %C0"[(set_attr "length" "3,7")];; Ignore possible clobbering of the comparison flags in the;; PSW register. This is a cc0 target so any cc0 setting;; instruction will always be paired with a cc0 user, without;; the possibility of this instruction being placed in between;; them.);; Move to interrupt priority level(define_insn "mvtipl"[(unspec_volatile:SI [(match_operand:SI 0 "immediate_operand" "Uint04")]UNSPEC_BUILTIN_MVTIPL)]"""mvtipl\t%0"[(set_attr "length" "3")]);;---------- Interrupts ------------------------;; Break(define_insn "brk"[(unspec_volatile [(const_int 0)]UNSPEC_BUILTIN_BRK)]"""brk"[(set_attr "length" "1")(set_attr "timings" "66")]);; Interrupt(define_insn "int"[(unspec_volatile:SI [(match_operand:SI 0 "immediate_operand" "i")]UNSPEC_BUILTIN_INT)]"""int\t%0"[(set_attr "length" "3")]);; Wait(define_insn "wait"[(unspec_volatile [(const_int 0)]UNSPEC_BUILTIN_WAIT)]"""wait"[(set_attr "length" "2")]);;---------- CoProcessor Support ------------------------;; FIXME: The instructions are currently commented out because;; the bit patterns have not been finalized, so the assembler;; does not support them. Once they are decided and the assembler;; supports them, enable the instructions here.;; Move from co-processor register(define_insn "mvfcp"[(set (match_operand:SI 0 "register_operand" "=r")(unspec:SI [(match_operand:SI 1 "immediate_operand" "i")(match_operand:SI 2 "immediate_operand" "i")]UNSPEC_BUILTIN_MVFCP))]"""; mvfcp\t%1, %0, %2"[(set_attr "length" "5")]);;---------- Misc ------------------------;; Required by cfglayout.c...(define_insn "nop"[(const_int 0)]"""nop"[(set_attr "length" "1")])(define_expand "pid_addr"[(plus:SI (match_operand:SI 0)(const:SI (unspec:SI [(match_operand:SI 1)] UNSPEC_PID_ADDR)))]"""")
Go to most recent revision | Compare with Previous | Blame | View Log