URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [config/] [v850/] [v850.md] - Rev 709
Compare with Previous | Blame | View Log
;; GCC machine description for NEC V850
;; Copyright (C) 1996, 1997, 1998, 1999, 2002, 2004, 2005, 2007, 2008, 2010
;; Free Software Foundation, Inc.
;; Contributed by Jeff Law (law@cygnus.com).
;; This file is part of GCC.
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; <http://www.gnu.org/licenses/>.
;; The original PO technology requires these to be ordered by speed,
;; so that assigner will pick the fastest.
;; See file "rtl.def" for documentation on define_insn, match_*, et. al.
;; The V851 manual states that the instruction address space is 16M;
;; the various branch/call instructions only have a 22bit offset (4M range).
;;
;; One day we'll probably need to handle calls to targets more than 4M
;; away.
;; The size of instructions in bytes.
;;---------------------------------------------------------------------------
;; Constants
;;
(define_constants
[(ZERO_REGNUM 0) ; constant zero
(SP_REGNUM 3) ; Stack Pointer
(GP_REGNUM 4) ; GP Pointer
(EP_REGNUM 30) ; EP pointer
(LP_REGNUM 31) ; Return address register
(CC_REGNUM 32) ; Condition code pseudo register
(FCC_REGNUM 33) ; Floating Condition code pseudo register
]
)
(define_attr "length" ""
(const_int 4))
(define_attr "long_calls" "yes,no"
(const (if_then_else (symbol_ref "TARGET_LONG_CALLS")
(const_string "yes")
(const_string "no"))))
;; Types of instructions (for scheduling purposes).
(define_attr "type" "load,store,bit1,mult,macc,div,fpu,single,other"
(const_string "other"))
(define_attr "cpu" "none,v850,v850e,v850e1,v850e2,v850e2v3"
(cond [(match_test "TARGET_V850")
(const_string "v850")
(match_test "TARGET_V850E")
(const_string "v850e")
(match_test "TARGET_V850E1")
(const_string "v850e1")
(match_test "TARGET_V850E2")
(const_string "v850e2")
(match_test "TARGET_V850E2")
(const_string "v850e2v3")]
(const_string "none")))
;; Condition code settings.
;; none - insn does not affect cc
;; none_0hit - insn does not affect cc but it does modify operand 0
;; This attribute is used to keep track of when operand 0 changes.
;; See the description of NOTICE_UPDATE_CC for more info.
;; set_znv - sets z,n,v to usable values; c is unknown.
;; set_zn - sets z,n to usable values; v,c is unknown.
;; compare - compare instruction
;; clobber - value of cc is unknown
(define_attr "cc" "none,none_0hit,set_z,set_zn,set_znv,compare,clobber"
(const_string "clobber"))
;; Function units for the V850. As best as I can tell, there's
;; a traditional memory load/use stall as well as a stall if
;; the result of a multiply is used too early.
(define_insn_reservation "v850_other" 1
(eq_attr "type" "other")
"nothing")
(define_insn_reservation "v850_mult" 2
(eq_attr "type" "mult")
"nothing")
(define_insn_reservation "v850_memory" 2
(eq_attr "type" "load")
"nothing")
(include "predicates.md")
(include "constraints.md")
;; ----------------------------------------------------------------------
;; MOVE INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "sign23byte_load"
[(set (match_operand:SI 0 "register_operand" "=r")
(sign_extend:SI
(mem:QI (plus:SI (match_operand:SI 1 "register_operand" "r")
(match_operand 2 "disp23_operand" "W")))))]
"TARGET_V850E2V3"
"ld.b %2[%1],%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "unsign23byte_load"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extend:SI
(mem:QI (plus:SI (match_operand:SI 1 "register_operand" "r")
(match_operand 2 "disp23_operand" "W")))))]
"TARGET_V850E2V3"
"ld.bu %2[%1],%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "sign23hword_load"
[(set (match_operand:SI 0 "register_operand" "=r")
(sign_extend:SI
(mem:HI (plus:SI (match_operand:SI 1 "register_operand" "r")
(match_operand 2 "disp23_operand" "W")))))]
"TARGET_V850E2V3"
"ld.h %2[%1],%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "unsign23hword_load"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extend:SI
(mem:HI (plus:SI (match_operand:SI 1 "register_operand" "r")
(match_operand 2 "disp23_operand" "W")))))]
"TARGET_V850E2V3"
"ld.hu %2[%1],%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "23word_load"
[(set (match_operand:SI 0 "register_operand" "=r")
(mem:SI (plus:SI (match_operand:SI 1 "register_operand" "r")
(match_operand 2 "disp23_operand" "W"))))]
"TARGET_V850E2V3"
"ld.w %2[%1],%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "23byte_store"
[(set (mem:QI (plus:SI (match_operand:SI 0 "register_operand" "r")
(match_operand 1 "disp23_operand" "W")))
(match_operand:QI 2 "register_operand" "r"))]
"TARGET_V850E2V3"
"st.b %2,%1[%0]"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "23hword_store"
[(set (mem:HI (plus:SI (match_operand:SI 0 "register_operand" "r")
(match_operand 1 "disp23_operand" "W")))
(match_operand:HI 2 "register_operand" "r"))]
"TARGET_V850E2V3"
"st.h %2,%1[%0]"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "23word_store"
[(set (mem:SI (plus:SI (match_operand:SI 0 "register_operand" "r")
(match_operand 1 "disp23_operand" "W")))
(match_operand:SI 2 "register_operand" "r"))]
"TARGET_V850E2V3"
"st.w %2,%1[%0]"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
;; movqi
(define_expand "movqi"
[(set (match_operand:QI 0 "general_operand" "")
(match_operand:QI 1 "general_operand" ""))]
""
"
{
/* One of the ops has to be in a register or 0 */
if (!register_operand (operand0, QImode)
&& !reg_or_0_operand (operand1, QImode))
operands[1] = copy_to_mode_reg (QImode, operand1);
}")
(define_insn "*movqi_internal"
[(set (match_operand:QI 0 "general_operand" "=r,r,r,Q,r,m,m")
(match_operand:QI 1 "general_operand" "Jr,n,Q,Ir,m,r,I"))]
"register_operand (operands[0], QImode)
|| reg_or_0_operand (operands[1], QImode)"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,2,2,4,4,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,load,other,load,store,store")])
;; movhi
(define_expand "movhi"
[(set (match_operand:HI 0 "general_operand" "")
(match_operand:HI 1 "general_operand" ""))]
""
"
{
/* One of the ops has to be in a register or 0 */
if (!register_operand (operand0, HImode)
&& !reg_or_0_operand (operand1, HImode))
operands[1] = copy_to_mode_reg (HImode, operand1);
}")
(define_insn "*movhi_internal"
[(set (match_operand:HI 0 "general_operand" "=r,r,r,Q,r,m,m")
(match_operand:HI 1 "general_operand" "Jr,n,Q,Ir,m,r,I"))]
"register_operand (operands[0], HImode)
|| reg_or_0_operand (operands[1], HImode)"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,2,2,4,4,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,load,other,load,store,store")])
;; movsi and helpers
(define_insn "*movsi_high"
[(set (match_operand:SI 0 "register_operand" "=r")
(high:SI (match_operand 1 "immediate_operand" "i")))]
""
"movhi hi(%1),%.,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "other")])
(define_insn "*movsi_lo"
[(set (match_operand:SI 0 "register_operand" "=r")
(lo_sum:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "immediate_operand" "i")))]
""
"movea lo(%2),%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "other")])
(define_expand "movsi"
[(set (match_operand:SI 0 "general_operand" "")
(match_operand:SI 1 "general_operand" ""))]
""
"
{
/* One of the ops has to be in a register or 0 */
if (!register_operand (operand0, SImode)
&& !reg_or_0_operand (operand1, SImode))
operands[1] = copy_to_mode_reg (SImode, operand1);
/* Some constants, as well as symbolic operands
must be done with HIGH & LO_SUM patterns. */
if (CONSTANT_P (operands[1])
&& GET_CODE (operands[1]) != HIGH
&& ! (TARGET_V850E || TARGET_V850E2_ALL)
&& !special_symbolref_operand (operands[1], VOIDmode)
&& !(GET_CODE (operands[1]) == CONST_INT
&& (CONST_OK_FOR_J (INTVAL (operands[1]))
|| CONST_OK_FOR_K (INTVAL (operands[1]))
|| CONST_OK_FOR_L (INTVAL (operands[1])))))
{
rtx temp;
if (reload_in_progress || reload_completed)
temp = operands[0];
else
temp = gen_reg_rtx (SImode);
emit_insn (gen_rtx_SET (SImode, temp,
gen_rtx_HIGH (SImode, operand1)));
emit_insn (gen_rtx_SET (SImode, operand0,
gen_rtx_LO_SUM (SImode, temp, operand1)));
DONE;
}
}")
;; This is the same as the following pattern, except that it includes
;; support for arbitrary 32-bit immediates.
;; ??? This always loads addresses using hilo. If the only use of this address
;; was in a load/store, then we would get smaller code if we only loaded the
;; upper part with hi, and then put the lower part in the load/store insn.
(define_insn "*movsi_internal_v850e"
[(set (match_operand:SI 0 "general_operand" "=r,r,r,r,Q,r,r,m,m,r")
(match_operand:SI 1 "general_operand" "Jr,K,L,Q,Ir,m,R,r,I,i"))]
"(TARGET_V850E || TARGET_V850E2_ALL)
&& (register_operand (operands[0], SImode)
|| reg_or_0_operand (operands[1], SImode))"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,4,2,2,4,4,4,4,6")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,other,load,other,load,other,store,store,other")])
(define_insn "*movsi_internal"
[(set (match_operand:SI 0 "general_operand" "=r,r,r,r,Q,r,r,m,m")
(match_operand:SI 1 "movsi_source_operand" "Jr,K,L,Q,Ir,m,R,r,I"))]
"register_operand (operands[0], SImode)
|| reg_or_0_operand (operands[1], SImode)"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,4,2,2,4,4,4,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,other,load,other,load,store,store,other")])
(define_insn "*movsf_internal"
[(set (match_operand:SF 0 "general_operand" "=r,r,r,r,r,Q,r,m,m,r")
(match_operand:SF 1 "general_operand" "Jr,K,L,n,Q,Ir,m,r,IG,iF"))]
"register_operand (operands[0], SFmode)
|| reg_or_0_operand (operands[1], SFmode)"
"* return output_move_single (operands);"
[(set_attr "length" "2,4,4,8,2,2,4,4,4,8")
(set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
(set_attr "type" "other,other,other,other,load,other,load,store,store,other")])
;; ----------------------------------------------------------------------
;; TEST INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "*v850_tst1"
[(set (cc0)
(compare (zero_extract:SI (match_operand:QI 0 "memory_operand" "m")
(const_int 1)
(match_operand:QI 1 "const_int_operand" "n"))
(const_int 0)))]
""
"tst1 %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; This replaces ld.b;sar;andi with tst1;setf nz.
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(compare (zero_extract:SI (match_operand:QI 1 "memory_operand" "")
(const_int 1)
(match_operand 2 "const_int_operand" ""))
(const_int 0)))]
""
[(set (cc0) (compare (zero_extract:SI (match_dup 1)
(const_int 1)
(match_dup 2))
(const_int 0)))
(set (match_dup 0) (ne:SI (cc0) (const_int 0)))])
(define_expand "cbranchsi4"
[(set (cc0)
(compare (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_int5_operand" "")))
(set (pc)
(if_then_else
(match_operator 0 "ordered_comparison_operator" [(cc0)
(const_int 0)])
(label_ref (match_operand 3 "" ""))
(pc)))]
"")
(define_expand "cstoresi4"
[(set (cc0)
(compare (match_operand:SI 2 "register_operand" "")
(match_operand:SI 3 "reg_or_int5_operand" "")))
(set (match_operand:SI 0 "register_operand")
(match_operator:SI 1 "ordered_comparison_operator" [(cc0)
(const_int 0)]))]
"")
(define_expand "cmpsi"
[(set (cc0)
(compare (match_operand:SI 0 "register_operand" "r,r")
(match_operand:SI 1 "reg_or_int5_operand" "r,J")))]
""
"
{
v850_compare_op0 = operands[0];
v850_compare_op1 = operands[1];
DONE;
}")
(define_insn "cmpsi_insn"
[(set (cc0)
(compare (match_operand:SI 0 "register_operand" "r,r")
(match_operand:SI 1 "reg_or_int5_operand" "r,J")))]
""
"@
cmp %1,%0
cmp %1,%0"
[(set_attr "length" "2,2")
(set_attr "cc" "compare")])
(define_expand "cmpsf"
[(set (reg:CC CC_REGNUM)
(compare (match_operand:SF 0 "register_operand" "r")
(match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"
{
v850_compare_op0 = operands[0];
v850_compare_op1 = operands[1];
DONE;
}")
(define_expand "cmpdf"
[(set (reg:CC CC_REGNUM)
(compare (match_operand:DF 0 "even_reg_operand" "r")
(match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"
{
v850_compare_op0 = operands[0];
v850_compare_op1 = operands[1];
DONE;
}")
;; ----------------------------------------------------------------------
;; ADD INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "addsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(plus:SI (match_operand:SI 1 "register_operand" "%0,r,r")
(match_operand:SI 2 "nonmemory_operand" "rJ,K,U")))
(clobber (reg:CC CC_REGNUM))]
""
"@
add %2,%0
addi %2,%1,%0
addi %O2(%P2),%1,%0"
[(set_attr "length" "2,4,4")
(set_attr "cc" "set_zn,set_zn,set_zn")])
;; ----------------------------------------------------------------------
;; SUBTRACT INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "subsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(minus:SI (match_operand:SI 1 "register_operand" "0,r")
(match_operand:SI 2 "register_operand" "r,0")))
(clobber (reg:CC CC_REGNUM))]
""
"@
sub %2,%0
subr %1,%0"
[(set_attr "length" "2,2")
(set_attr "cc" "set_zn,set_zn")])
(define_insn "negsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(neg:SI (match_operand:SI 1 "register_operand" "0")))
(clobber (reg:CC CC_REGNUM))]
""
"subr %.,%0"
[(set_attr "length" "2")
(set_attr "cc" "set_zn")])
;; ----------------------------------------------------------------------
;; MULTIPLY INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_expand "mulhisi3"
[(set (match_operand:SI 0 "register_operand" "")
(mult:SI
(sign_extend:SI (match_operand:HI 1 "register_operand" ""))
(sign_extend:SI (match_operand:HI 2 "nonmemory_operand" ""))))]
""
"if (GET_CODE (operands[2]) == CONST_INT)
{
emit_insn (gen_mulhisi3_internal2 (operands[0], operands[1], operands[2]));
DONE;
}")
(define_insn "*mulhisi3_internal1"
[(set (match_operand:SI 0 "register_operand" "=r")
(mult:SI
(sign_extend:SI (match_operand:HI 1 "register_operand" "%0"))
(sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]
""
"mulh %2,%0"
[(set_attr "length" "2")
(set_attr "cc" "none_0hit")
(set_attr "type" "mult")])
(define_insn "mulhisi3_internal2"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(mult:SI
(sign_extend:SI (match_operand:HI 1 "register_operand" "%0,r"))
(match_operand:HI 2 "const_int_operand" "J,K")))]
""
"@
mulh %2,%0
mulhi %2,%1,%0"
[(set_attr "length" "2,4")
(set_attr "cc" "none_0hit,none_0hit")
(set_attr "type" "mult")])
;; ??? The scheduling info is probably wrong.
;; ??? This instruction can also generate the 32-bit highpart, but using it
;; may increase code size counter to the desired result.
;; ??? This instructions can also give a DImode result.
;; ??? There is unsigned version, but it matters only for the DImode/highpart
;; results.
(define_insn "mulsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(mult:SI (match_operand:SI 1 "register_operand" "%0")
(match_operand:SI 2 "reg_or_int9_operand" "rO")))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"mul %2,%1,%."
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "mult")])
;; ----------------------------------------------------------------------
;; DIVIDE INSTRUCTIONS
;; ----------------------------------------------------------------------
;; ??? These insns do set the Z/N condition codes, except that they are based
;; on only one of the two results, so it doesn't seem to make sense to use
;; them.
;; ??? The scheduling info is probably wrong.
(define_insn "divmodsi4"
[(set (match_operand:SI 0 "register_operand" "=r")
(div:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))
(set (match_operand:SI 3 "register_operand" "=r")
(mod:SI (match_dup 1)
(match_dup 2)))
(clobber (reg:CC CC_REGNUM))]
"TARGET_V850E || TARGET_V850E2_ALL"
{
if (TARGET_V850E2_ALL)
return "divq %2,%0,%3";
else
return "div %2,%0,%3";
}
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "div")])
(define_insn "udivmodsi4"
[(set (match_operand:SI 0 "register_operand" "=r")
(udiv:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))
(set (match_operand:SI 3 "register_operand" "=r")
(umod:SI (match_dup 1)
(match_dup 2)))
(clobber (reg:CC CC_REGNUM))]
"TARGET_V850E || TARGET_V850E2_ALL"
{
if (TARGET_V850E2_ALL)
return "divqu %2,%0,%3";
else
return "divu %2,%0,%3";
}
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "div")])
;; ??? There is a 2 byte instruction for generating only the quotient.
;; However, it isn't clear how to compute the length field correctly.
(define_insn "divmodhi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(div:HI (match_operand:HI 1 "register_operand" "0")
(match_operand:HI 2 "register_operand" "r")))
(set (match_operand:HI 3 "register_operand" "=r")
(mod:HI (match_dup 1)
(match_dup 2)))
(clobber (reg:CC CC_REGNUM))]
"TARGET_V850E || TARGET_V850E2_ALL"
"divh %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "div")])
;; Half-words are sign-extended by default, so we must zero extend to a word
;; here before doing the divide.
(define_insn "udivmodhi4"
[(set (match_operand:HI 0 "register_operand" "=r")
(udiv:HI (match_operand:HI 1 "register_operand" "0")
(match_operand:HI 2 "register_operand" "r")))
(set (match_operand:HI 3 "register_operand" "=r")
(umod:HI (match_dup 1)
(match_dup 2)))
(clobber (reg:CC CC_REGNUM))]
"TARGET_V850E || TARGET_V850E2_ALL"
"zxh %0 ; divhu %2,%0,%3"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "div")])
;; ----------------------------------------------------------------------
;; AND INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "*v850_clr1_1"
[(set (match_operand:QI 0 "memory_operand" "=m")
(subreg:QI
(and:SI (subreg:SI (match_dup 0) 0)
(match_operand:QI 1 "not_power_of_two_operand" "")) 0))
(clobber (reg:CC CC_REGNUM))]
""
"*
{
rtx xoperands[2];
xoperands[0] = operands[0];
xoperands[1] = GEN_INT (~INTVAL (operands[1]) & 0xff);
output_asm_insn (\"clr1 %M1,%0\", xoperands);
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "bit1")])
(define_insn "*v850_clr1_2"
[(set (match_operand:HI 0 "indirect_operand" "=m")
(subreg:HI
(and:SI (subreg:SI (match_dup 0) 0)
(match_operand:HI 1 "not_power_of_two_operand" "")) 0))
(clobber (reg:CC CC_REGNUM))]
""
"*
{
int log2 = exact_log2 (~INTVAL (operands[1]) & 0xffff);
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0), log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"clr1 %1,%0\", xoperands);
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "bit1")])
(define_insn "*v850_clr1_3"
[(set (match_operand:SI 0 "indirect_operand" "=m")
(and:SI (match_dup 0)
(match_operand:SI 1 "not_power_of_two_operand" "")))
(clobber (reg:CC CC_REGNUM))]
""
"*
{
int log2 = exact_log2 (~INTVAL (operands[1]) & 0xffffffff);
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0), log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"clr1 %1,%0\", xoperands);
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "bit1")])
(define_insn "andsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(and:SI (match_operand:SI 1 "register_operand" "%0,0,r")
(match_operand:SI 2 "nonmemory_operand" "r,I,M")))
(clobber (reg:CC CC_REGNUM))]
""
"@
and %2,%0
and %.,%0
andi %2,%1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "set_zn")])
;; ----------------------------------------------------------------------
;; OR INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "*v850_set1_1"
[(set (match_operand:QI 0 "memory_operand" "=m")
(subreg:QI (ior:SI (subreg:SI (match_dup 0) 0)
(match_operand 1 "power_of_two_operand" "")) 0))
(clobber (reg:CC CC_REGNUM))]
""
"set1 %M1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "bit1")])
(define_insn "*v850_set1_2"
[(set (match_operand:HI 0 "indirect_operand" "=m")
(subreg:HI (ior:SI (subreg:SI (match_dup 0) 0)
(match_operand 1 "power_of_two_operand" "")) 0))]
""
"*
{
int log2 = exact_log2 (INTVAL (operands[1]));
if (log2 < 8)
return \"set1 %M1,%0\";
else
{
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0),
log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"set1 %1,%0\", xoperands);
}
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "bit1")])
(define_insn "*v850_set1_3"
[(set (match_operand:SI 0 "indirect_operand" "=m")
(ior:SI (match_dup 0)
(match_operand 1 "power_of_two_operand" "")))
(clobber (reg:CC CC_REGNUM))]
""
"*
{
int log2 = exact_log2 (INTVAL (operands[1]));
if (log2 < 8)
return \"set1 %M1,%0\";
else
{
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0),
log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"set1 %1,%0\", xoperands);
}
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "bit1")])
(define_insn "iorsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(ior:SI (match_operand:SI 1 "register_operand" "%0,0,r")
(match_operand:SI 2 "nonmemory_operand" "r,I,M")))
(clobber (reg:CC CC_REGNUM))]
""
"@
or %2,%0
or %.,%0
ori %2,%1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "set_zn")])
;; ----------------------------------------------------------------------
;; XOR INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "*v850_not1_1"
[(set (match_operand:QI 0 "memory_operand" "=m")
(subreg:QI (xor:SI (subreg:SI (match_dup 0) 0)
(match_operand 1 "power_of_two_operand" "")) 0))
(clobber (reg:CC CC_REGNUM))]
""
"not1 %M1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "bit1")])
(define_insn "*v850_not1_2"
[(set (match_operand:HI 0 "indirect_operand" "=m")
(subreg:HI (xor:SI (subreg:SI (match_dup 0) 0)
(match_operand 1 "power_of_two_operand" "")) 0))]
""
"*
{
int log2 = exact_log2 (INTVAL (operands[1]));
if (log2 < 8)
return \"not1 %M1,%0\";
else
{
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0),
log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"not1 %1,%0\", xoperands);
}
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "bit1")])
(define_insn "*v850_not1_3"
[(set (match_operand:SI 0 "indirect_operand" "=m")
(xor:SI (match_dup 0)
(match_operand 1 "power_of_two_operand" "")))
(clobber (reg:CC CC_REGNUM))]
""
"*
{
int log2 = exact_log2 (INTVAL (operands[1]));
if (log2 < 8)
return \"not1 %M1,%0\";
else
{
rtx xoperands[2];
xoperands[0] = gen_rtx_MEM (QImode,
plus_constant (XEXP (operands[0], 0),
log2 / 8));
xoperands[1] = GEN_INT (log2 % 8);
output_asm_insn (\"not1 %1,%0\", xoperands);
}
return \"\";
}"
[(set_attr "length" "4")
(set_attr "cc" "clobber")
(set_attr "type" "bit1")])
(define_insn "xorsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(xor:SI (match_operand:SI 1 "register_operand" "%0,0,r")
(match_operand:SI 2 "nonmemory_operand" "r,I,M")))
(clobber (reg:CC CC_REGNUM))]
""
"@
xor %2,%0
xor %.,%0
xori %2,%1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "set_zn")])
;; ----------------------------------------------------------------------
;; NOT INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "one_cmplsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(not:SI (match_operand:SI 1 "register_operand" "r")))
(clobber (reg:CC CC_REGNUM))]
""
"not %1,%0"
[(set_attr "length" "2")
(set_attr "cc" "set_zn")])
;; -----------------------------------------------------------------
;; BIT FIELDS
;; -----------------------------------------------------------------
;; ??? Is it worth defining insv and extv for the V850 series?!?
;; An insv pattern would be useful, but does not get used because
;; store_bit_field never calls insv when storing a constant value into a
;; single-bit bitfield.
;; extv/extzv patterns would be useful, but do not get used because
;; optimize_bitfield_compare in fold-const usually converts single
;; bit extracts into an AND with a mask.
;; -----------------------------------------------------------------
;; Scc INSTRUCTIONS
;; -----------------------------------------------------------------
(define_insn "*setcc"
[(set (match_operand:SI 0 "register_operand" "=r")
(match_operator:SI 1 "comparison_operator"
[(cc0) (const_int 0)]))]
""
"*
{
if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0
&& (GET_CODE (operands[1]) == GT
|| GET_CODE (operands[1]) == GE
|| GET_CODE (operands[1]) == LE
|| GET_CODE (operands[1]) == LT))
return 0;
return \"setf %c1,%0\";
}"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "setf_insn"
[(set (match_operand:SI 0 "register_operand" "=r")
(match_operator:SI 1 "comparison_operator"
[(reg:CC CC_REGNUM) (const_int 0)]))]
""
"setf %b1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "set_z_insn"
[(set (match_operand:SI 0 "register_operand" "=r")
(match_operand 1 "v850_float_z_comparison_operator" ""))]
"TARGET_V850E2V3"
"setf z,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
(define_insn "set_nz_insn"
[(set (match_operand:SI 0 "register_operand" "=r")
(match_operand 1 "v850_float_nz_comparison_operator" ""))]
"TARGET_V850E2V3"
"setf nz,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")])
;; ----------------------------------------------------------------------
;; CONDITIONAL MOVE INSTRUCTIONS
;; ----------------------------------------------------------------------
;; Instructions using cc0 aren't allowed to have input reloads, so we must
;; hide the fact that this instruction uses cc0. We do so by including the
;; compare instruction inside it.
(define_expand "movsicc"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operand 1 "comparison_operator")
(match_operand:SI 2 "reg_or_const_operand" "rJ")
(match_operand:SI 3 "reg_or_const_operand" "rI")))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"
{
if ( (GET_CODE (operands[2]) == CONST_INT
&& GET_CODE (operands[3]) == CONST_INT))
{
int o2 = INTVAL (operands[2]);
int o3 = INTVAL (operands[3]);
if (o2 == 1 && o3 == 0)
FAIL; /* setf */
if (o3 == 1 && o2 == 0)
FAIL; /* setf */
if (o2 == 0 && (o3 < -16 || o3 > 15) && exact_log2 (o3) >= 0)
FAIL; /* setf + shift */
if (o3 == 0 && (o2 < -16 || o2 > 15) && exact_log2 (o2) >=0)
FAIL; /* setf + shift */
if (o2 != 0)
operands[2] = copy_to_mode_reg (SImode, operands[2]);
if (o3 !=0 )
operands[3] = copy_to_mode_reg (SImode, operands[3]);
}
else
{
if (GET_CODE (operands[2]) != REG)
operands[2] = copy_to_mode_reg (SImode,operands[2]);
if (GET_CODE (operands[3]) != REG)
operands[3] = copy_to_mode_reg (SImode, operands[3]);
}
}")
;; ??? Clobbering the condition codes is overkill.
;; ??? We sometimes emit an unnecessary compare instruction because the
;; condition codes may have already been set by an earlier instruction,
;; but we have no code here to avoid the compare if it is unnecessary.
(define_insn "movsicc_normal_cc"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(reg:CC CC_REGNUM) (const_int 0)])
(match_operand:SI 2 "reg_or_int5_operand" "rJ")
(match_operand:SI 3 "reg_or_0_operand" "rI")))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"cmov %c1,%2,%z3,%0";
[(set_attr "length" "6")
(set_attr "cc" "compare")])
(define_insn "movsicc_reversed_cc"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(reg:CC CC_REGNUM) (const_int 0)])
(match_operand:SI 2 "reg_or_0_operand" "rI")
(match_operand:SI 3 "reg_or_int5_operand" "rJ")))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"cmov %C1,%3,%z2,%0"
[(set_attr "length" "6")
(set_attr "cc" "compare")])
(define_insn "*movsicc_normal"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 4 "register_operand" "r")
(match_operand:SI 5 "reg_or_int5_operand" "rJ")])
(match_operand:SI 2 "reg_or_int5_operand" "rJ")
(match_operand:SI 3 "reg_or_0_operand" "rI")))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"cmp %5,%4 ; cmov %c1,%2,%z3,%0"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_insn "*movsicc_reversed"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 4 "register_operand" "r")
(match_operand:SI 5 "reg_or_int5_operand" "rJ")])
(match_operand:SI 2 "reg_or_0_operand" "rI")
(match_operand:SI 3 "reg_or_int5_operand" "rJ")))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"cmp %5,%4 ; cmov %C1,%3,%z2,%0"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_insn "*movsicc_tst1"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(zero_extract:SI
(match_operand:QI 2 "memory_operand" "m")
(const_int 1)
(match_operand 3 "const_int_operand" "n"))
(const_int 0)])
(match_operand:SI 4 "reg_or_int5_operand" "rJ")
(match_operand:SI 5 "reg_or_0_operand" "rI")))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"tst1 %3,%2 ; cmov %c1,%4,%z5,%0"
[(set_attr "length" "8")
(set_attr "cc" "clobber")])
(define_insn "*movsicc_tst1_reversed"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(zero_extract:SI
(match_operand:QI 2 "memory_operand" "m")
(const_int 1)
(match_operand 3 "const_int_operand" "n"))
(const_int 0)])
(match_operand:SI 4 "reg_or_0_operand" "rI")
(match_operand:SI 5 "reg_or_int5_operand" "rJ")))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"tst1 %3,%2 ; cmov %C1,%5,%z4,%0"
[(set_attr "length" "8")
(set_attr "cc" "clobber")])
;; Matching for sasf requires combining 4 instructions, so we provide a
;; dummy pattern to match the first 3, which will always be turned into the
;; second pattern by subsequent combining. As above, we must include the
;; comparison to avoid input reloads in an insn using cc0.
(define_insn "*sasf"
[(set (match_operand:SI 0 "register_operand" "=r")
(ior:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 3 "register_operand" "r")
(match_operand:SI 4 "reg_or_int5_operand" "rJ")])
(ashift:SI (match_operand:SI 2 "register_operand" "0")
(const_int 1))))
(clobber (reg:CC CC_REGNUM))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"cmp %4,%3 ; sasf %c1,%0"
[(set_attr "length" "6")
(set_attr "cc" "clobber")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(if_then_else:SI
(match_operator 1 "comparison_operator"
[(match_operand:SI 4 "register_operand" "")
(match_operand:SI 5 "reg_or_int5_operand" "")])
(match_operand:SI 2 "const_int_operand" "")
(match_operand:SI 3 "const_int_operand" "")))
(clobber (reg:CC CC_REGNUM))]
"(TARGET_V850E || TARGET_V850E2_ALL)
&& ((INTVAL (operands[2]) ^ INTVAL (operands[3])) == 1)
&& ((INTVAL (operands[2]) + INTVAL (operands[3])) != 1)
&& (GET_CODE (operands[5]) == CONST_INT
|| REGNO (operands[0]) != REGNO (operands[5]))
&& REGNO (operands[0]) != REGNO (operands[4])"
[(set (match_dup 0) (match_dup 6))
(parallel [(set (match_dup 0)
(ior:SI (match_op_dup 7 [(match_dup 4) (match_dup 5)])
(ashift:SI (match_dup 0) (const_int 1))))
(clobber (reg:CC CC_REGNUM))])]
"
{
operands[6] = GEN_INT (INTVAL (operands[2]) >> 1);
if (INTVAL (operands[2]) & 0x1)
operands[7] = operands[1];
else
operands[7] = gen_rtx_fmt_ee (reverse_condition (GET_CODE (operands[1])),
GET_MODE (operands[1]),
XEXP (operands[1], 0), XEXP (operands[1], 1));
}")
;; ---------------------------------------------------------------------
;; BYTE SWAP INSTRUCTIONS
;; ---------------------------------------------------------------------
(define_expand "rotlhi3"
[(parallel [(set (match_operand:HI 0 "register_operand" "")
(rotate:HI (match_operand:HI 1 "register_operand" "")
(match_operand:HI 2 "const_int_operand" "")))
(clobber (reg:CC CC_REGNUM))])]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"
{
if (INTVAL (operands[2]) != 8)
FAIL;
}")
(define_insn "*rotlhi3_8"
[(set (match_operand:HI 0 "register_operand" "=r")
(rotate:HI (match_operand:HI 1 "register_operand" "r")
(const_int 8)))
(clobber (reg:CC CC_REGNUM))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"bsh %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_expand "rotlsi3"
[(parallel [(set (match_operand:SI 0 "register_operand" "")
(rotate:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "const_int_operand" "")))
(clobber (reg:CC CC_REGNUM))])]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"
{
if (INTVAL (operands[2]) != 16)
FAIL;
}")
(define_insn "*rotlsi3_16"
[(set (match_operand:SI 0 "register_operand" "=r")
(rotate:SI (match_operand:SI 1 "register_operand" "r")
(const_int 16)))
(clobber (reg:CC CC_REGNUM))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"hsw %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; ----------------------------------------------------------------------
;; JUMP INSTRUCTIONS
;; ----------------------------------------------------------------------
;; Conditional jump instructions
(define_insn "*branch_normal"
[(set (pc)
(if_then_else (match_operator 1 "comparison_operator"
[(cc0) (const_int 0)])
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"*
{
if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0
&& (GET_CODE (operands[1]) == GT
|| GET_CODE (operands[1]) == GE
|| GET_CODE (operands[1]) == LE
|| GET_CODE (operands[1]) == LT))
return 0;
if (get_attr_length (insn) == 2)
return \"b%b1 %l0\";
else
return \"b%B1 .+6 ; jr %l0\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 6)))
(set_attr "cc" "none")])
(define_insn "*branch_invert"
[(set (pc)
(if_then_else (match_operator 1 "comparison_operator"
[(cc0) (const_int 0)])
(pc)
(label_ref (match_operand 0 "" ""))))]
""
"*
{
if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0
&& (GET_CODE (operands[1]) == GT
|| GET_CODE (operands[1]) == GE
|| GET_CODE (operands[1]) == LE
|| GET_CODE (operands[1]) == LT))
return 0;
if (get_attr_length (insn) == 2)
return \"b%B1 %l0\";
else
return \"b%b1 .+6 ; jr %l0\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 6)))
(set_attr "cc" "none")])
(define_insn "branch_z_normal"
[(set (pc)
(if_then_else (match_operand 1 "v850_float_z_comparison_operator" "")
(label_ref (match_operand 0 "" ""))
(pc)))]
"TARGET_V850E2V3"
"*
{
if (get_attr_length (insn) == 2)
return \"bz %l0\";
else
return \"bnz 1f ; jr %l0 ; 1:\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 6)))
(set_attr "cc" "none")])
(define_insn "*branch_z_invert"
[(set (pc)
(if_then_else (match_operand 1 "v850_float_z_comparison_operator" "")
(pc)
(label_ref (match_operand 0 "" ""))))]
"TARGET_V850E2V3"
"*
{
if (get_attr_length (insn) == 2)
return \"bnz %l0\";
else
return \"bz 1f ; jr %l0 ; 1:\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 6)))
(set_attr "cc" "none")])
(define_insn "branch_nz_normal"
[(set (pc)
(if_then_else (match_operand 1 "v850_float_nz_comparison_operator" "")
(label_ref (match_operand 0 "" ""))
(pc)))]
"TARGET_V850E2V3"
"*
{
if (get_attr_length (insn) == 2)
return \"bnz %l0\";
else
return \"bz 1f ; jr %l0 ; 1:\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 6)))
(set_attr "cc" "none")])
(define_insn "*branch_nz_invert"
[(set (pc)
(if_then_else (match_operand 1 "v850_float_nz_comparison_operator" "")
(pc)
(label_ref (match_operand 0 "" ""))))]
"TARGET_V850E2V3"
"*
{
if (get_attr_length (insn) == 2)
return \"bz %l0\";
else
return \"bnz 1f ; jr %l0 ; 1:\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 6)))
(set_attr "cc" "none")])
;; Unconditional and other jump instructions.
(define_insn "jump"
[(set (pc)
(label_ref (match_operand 0 "" "")))]
""
"*
{
if (get_attr_length (insn) == 2)
return \"br %0\";
else
return \"jr %0\";
}"
[(set (attr "length")
(if_then_else (lt (abs (minus (match_dup 0) (pc)))
(const_int 256))
(const_int 2)
(const_int 4)))
(set_attr "cc" "none")])
(define_insn "indirect_jump"
[(set (pc) (match_operand:SI 0 "register_operand" "r"))]
""
"jmp %0"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "tablejump"
[(set (pc) (match_operand:SI 0 "register_operand" "r"))
(use (label_ref (match_operand 1 "" "")))]
""
"jmp %0"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "switch"
[(set (pc)
(plus:SI
(sign_extend:SI
(mem:HI
(plus:SI (ashift:SI (match_operand:SI 0 "register_operand" "r")
(const_int 1))
(label_ref (match_operand 1 "" "")))))
(label_ref (match_dup 1))))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"switch %0"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_expand "casesi"
[(match_operand:SI 0 "register_operand" "")
(match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" "")
(match_operand 3 "" "") (match_operand 4 "" "")]
""
"
{
rtx reg = gen_reg_rtx (SImode);
rtx tableaddress = gen_reg_rtx (SImode);
rtx test;
rtx mem;
/* Subtract the lower bound from the index. */
emit_insn (gen_subsi3 (reg, operands[0], operands[1]));
/* Compare the result against the number of table entries;
branch to the default label if out of range of the table. */
test = gen_rtx_fmt_ee (GTU, VOIDmode, reg, operands[2]);
emit_jump_insn (gen_cbranchsi4 (test, reg, operands[2], operands[4]));
/* Shift index for the table array access. */
emit_insn (gen_ashlsi3 (reg, reg, GEN_INT (TARGET_BIG_SWITCH ? 2 : 1)));
/* Load the table address into a pseudo. */
emit_insn (gen_movsi (tableaddress,
gen_rtx_LABEL_REF (Pmode, operands[3])));
/* Add the table address to the index. */
emit_insn (gen_addsi3 (reg, reg, tableaddress));
/* Load the table entry. */
mem = gen_const_mem (CASE_VECTOR_MODE, reg);
if (! TARGET_BIG_SWITCH)
{
rtx reg2 = gen_reg_rtx (HImode);
emit_insn (gen_movhi (reg2, mem));
emit_insn (gen_extendhisi2 (reg, reg2));
}
else
emit_insn (gen_movsi (reg, mem));
/* Add the table address. */
emit_insn (gen_addsi3 (reg, reg, tableaddress));
/* Branch to the switch label. */
emit_jump_insn (gen_tablejump (reg, operands[3]));
DONE;
}")
;; Call subroutine with no return value.
(define_expand "call"
[(call (match_operand:QI 0 "general_operand" "")
(match_operand:SI 1 "general_operand" ""))]
""
"
{
if (! call_address_operand (XEXP (operands[0], 0), QImode)
|| TARGET_LONG_CALLS)
XEXP (operands[0], 0) = force_reg (SImode, XEXP (operands[0], 0));
if (TARGET_LONG_CALLS)
emit_call_insn (gen_call_internal_long (XEXP (operands[0], 0), operands[1]));
else
emit_call_insn (gen_call_internal_short (XEXP (operands[0], 0), operands[1]));
DONE;
}")
(define_insn "call_internal_short"
[(call (mem:QI (match_operand:SI 0 "call_address_operand" "S,r"))
(match_operand:SI 1 "general_operand" "g,g"))
(clobber (reg:SI 31))]
"! TARGET_LONG_CALLS"
"@
jarl %0,r31
jarl .+4,r31 ; add 4,r31 ; jmp %0"
[(set_attr "length" "4,8")
(set_attr "cc" "clobber,clobber")]
)
(define_insn "call_internal_long"
[(call (mem:QI (match_operand:SI 0 "call_address_operand" "S,r"))
(match_operand:SI 1 "general_operand" "g,g"))
(clobber (reg:SI 31))]
"TARGET_LONG_CALLS"
"*
{
if (which_alternative == 0)
{
if (GET_CODE (operands[0]) == REG)
return \"jarl %0,r31\";
else
return \"movhi hi(%0), r0, r11 ; movea lo(%0), r11, r11 ; jarl .+4,r31 ; add 4, r31 ; jmp r11\";
}
else
return \"jarl .+4,r31 ; add 4,r31 ; jmp %0\";
}"
[(set_attr "length" "16,8")
(set_attr "cc" "clobber,clobber")]
)
;; Call subroutine, returning value in operand 0
;; (which must be a hard register).
(define_expand "call_value"
[(set (match_operand 0 "" "")
(call (match_operand:QI 1 "general_operand" "")
(match_operand:SI 2 "general_operand" "")))]
""
"
{
if (! call_address_operand (XEXP (operands[1], 0), QImode)
|| TARGET_LONG_CALLS)
XEXP (operands[1], 0) = force_reg (SImode, XEXP (operands[1], 0));
if (TARGET_LONG_CALLS)
emit_call_insn (gen_call_value_internal_long (operands[0],
XEXP (operands[1], 0),
operands[2]));
else
emit_call_insn (gen_call_value_internal_short (operands[0],
XEXP (operands[1], 0),
operands[2]));
DONE;
}")
(define_insn "call_value_internal_short"
[(set (match_operand 0 "" "=r,r")
(call (mem:QI (match_operand:SI 1 "call_address_operand" "S,r"))
(match_operand:SI 2 "general_operand" "g,g")))
(clobber (reg:SI 31))]
"! TARGET_LONG_CALLS"
"@
jarl %1,r31
jarl .+4,r31 ; add 4,r31 ; jmp %1"
[(set_attr "length" "4,8")
(set_attr "cc" "clobber,clobber")]
)
(define_insn "call_value_internal_long"
[(set (match_operand 0 "" "=r,r")
(call (mem:QI (match_operand:SI 1 "call_address_operand" "S,r"))
(match_operand:SI 2 "general_operand" "g,g")))
(clobber (reg:SI 31))]
"TARGET_LONG_CALLS"
"*
{
if (which_alternative == 0)
{
if (GET_CODE (operands[1]) == REG)
return \"jarl %1, r31\";
else
/* Reload can generate this pattern.... */
return \"movhi hi(%1), r0, r11 ; movea lo(%1), r11, r11 ; jarl .+4, r31 ; add 4, r31 ; jmp r11\";
}
else
return \"jarl .+4, r31 ; add 4, r31 ; jmp %1\";
}"
[(set_attr "length" "16,8")
(set_attr "cc" "clobber,clobber")]
)
(define_insn "nop"
[(const_int 0)]
""
"nop"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; ----------------------------------------------------------------------
;; EXTEND INSTRUCTIONS
;; ----------------------------------------------------------------------
(define_insn "*zero_extendhisi2_v850e"
[(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
(zero_extend:SI
(match_operand:HI 1 "nonimmediate_operand" "0,r,T,m")))
(clobber (reg:CC CC_REGNUM))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"@
zxh %0
andi 65535,%1,%0
sld.hu %1,%0
ld.hu %1,%0"
[(set_attr "length" "2,4,2,4")
(set_attr "cc" "none_0hit,set_zn,none_0hit,none_0hit")])
(define_insn "*zero_extendhisi2_v850"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extend:SI
(match_operand:HI 1 "register_operand" "r")))
(clobber (reg:CC CC_REGNUM))] ;; A lie, but we have to match the expander
""
"andi 65535,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "set_zn")])
(define_expand "zero_extendhisi2"
[(parallel [(set (match_operand:SI 0 "register_operand")
(zero_extend:SI
(match_operand:HI 1 "nonimmediate_operand")))
(clobber (reg:CC CC_REGNUM))])]
""
{
if (! (TARGET_V850E || TARGET_V850E2_ALL))
operands[1] = force_reg (HImode, operands[1]);
}
)
(define_insn "*zero_extendqisi2_v850e"
[(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
(zero_extend:SI
(match_operand:QI 1 "nonimmediate_operand" "0,r,T,m")))
(clobber (reg:CC CC_REGNUM))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"@
zxb %0
andi 255,%1,%0
sld.bu %1,%0
ld.bu %1,%0"
[(set_attr "length" "2,4,2,4")
(set_attr "cc" "none_0hit,set_zn,none_0hit,none_0hit")])
(define_insn "*zero_extendqisi2_v850"
[(set (match_operand:SI 0 "register_operand" "=r")
(zero_extend:SI
(match_operand:QI 1 "register_operand" "r")))
(clobber (reg:CC CC_REGNUM))] ;; A lie, but we have to match the expander
""
"andi 255,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "set_zn")])
(define_expand "zero_extendqisi2"
[(parallel [(set (match_operand:SI 0 "register_operand")
(zero_extend:SI
(match_operand:QI 1 "nonimmediate_operand")))
(clobber (reg:CC CC_REGNUM))])]
""
{
if (! (TARGET_V850E || TARGET_V850E2_ALL))
operands[1] = force_reg (QImode, operands[1]);
}
)
;;- sign extension instructions
;; ??? The extendhisi2 pattern should not emit shifts for v850e?
(define_insn "*extendhisi_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,Q,m")))
(clobber (reg:CC CC_REGNUM))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"@
sxh %0
sld.h %1,%0
ld.h %1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit")])
;; ??? This is missing a sign extend from memory pattern to match the ld.h
;; instruction.
(define_expand "extendhisi2"
[(parallel [(set (match_dup 2)
(ashift:SI (match_operand:HI 1 "register_operand" "")
(const_int 16)))
(clobber (reg:CC CC_REGNUM))])
(parallel [(set (match_operand:SI 0 "register_operand" "")
(ashiftrt:SI (match_dup 2)
(const_int 16)))
(clobber (reg:CC CC_REGNUM))])]
""
"
{
operands[1] = gen_lowpart (SImode, operands[1]);
operands[2] = gen_reg_rtx (SImode);
}")
;; ??? The extendqisi2 pattern should not emit shifts for v850e?
(define_insn "*extendqisi_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(sign_extend:SI (match_operand:QI 1 "nonimmediate_operand" "0,Q,m")))
(clobber (reg:CC CC_REGNUM))]
"(TARGET_V850E || TARGET_V850E2_ALL)"
"@
sxb %0
sld.b %1,%0
ld.b %1,%0"
[(set_attr "length" "2,2,4")
(set_attr "cc" "none_0hit,none_0hit,none_0hit")])
;; ??? This is missing a sign extend from memory pattern to match the ld.b
;; instruction.
(define_expand "extendqisi2"
[(parallel [(set (match_dup 2)
(ashift:SI (match_operand:QI 1 "register_operand" "")
(const_int 24)))
(clobber (reg:CC CC_REGNUM))])
(parallel [(set (match_operand:SI 0 "register_operand" "")
(ashiftrt:SI (match_dup 2)
(const_int 24)))
(clobber (reg:CC CC_REGNUM))])]
""
"
{
operands[1] = gen_lowpart (SImode, operands[1]);
operands[2] = gen_reg_rtx (SImode);
}")
;; ----------------------------------------------------------------------
;; SHIFTS
;; ----------------------------------------------------------------------
(define_insn "ashlsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(ashift:SI
(match_operand:SI 1 "register_operand" "0,0")
(match_operand:SI 2 "nonmemory_operand" "r,N")))
(clobber (reg:CC CC_REGNUM))]
""
"@
shl %2,%0
shl %2,%0"
[(set_attr "length" "4,2")
(set_attr "cc" "set_zn")])
(define_insn "ashlsi3_v850e2"
[(set (match_operand:SI 0 "register_operand" "=r")
(ashift:SI
(match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "nonmemory_operand" "r")))
(clobber (reg:CC CC_REGNUM))]
"TARGET_V850E2_ALL"
"shl %2,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "set_znv")])
(define_insn "lshrsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(lshiftrt:SI
(match_operand:SI 1 "register_operand" "0,0")
(match_operand:SI 2 "nonmemory_operand" "r,N")))
(clobber (reg:CC CC_REGNUM))]
""
"@
shr %2,%0
shr %2,%0"
[(set_attr "length" "4,2")
(set_attr "cc" "set_zn")])
(define_insn "lshrsi3_v850e2"
[(set (match_operand:SI 0 "register_operand" "=r")
(lshiftrt:SI
(match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "nonmemory_operand" "r")))
(clobber (reg:CC CC_REGNUM))]
"TARGET_V850E2_ALL"
"shr %2,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "set_zn")])
(define_insn "ashrsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(ashiftrt:SI
(match_operand:SI 1 "register_operand" "0,0")
(match_operand:SI 2 "nonmemory_operand" "r,N")))
(clobber (reg:CC CC_REGNUM))]
""
"@
sar %2,%0
sar %2,%0"
[(set_attr "length" "4,2")
(set_attr "cc" "set_zn, set_zn")])
(define_insn "ashrsi3_v850e2"
[(set (match_operand:SI 0 "register_operand" "=r")
(ashiftrt:SI
(match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "nonmemory_operand" "r")))
(clobber (reg:CC CC_REGNUM))]
"TARGET_V850E2_ALL"
"sar %2,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "set_zn")])
;; ----------------------------------------------------------------------
;; FIND FIRST BIT INSTRUCTION
;; ----------------------------------------------------------------------
(define_insn "ffssi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(ffs:SI (match_operand:SI 1 "register_operand" "r")))
(clobber (reg:CC CC_REGNUM))]
"TARGET_V850E2_ALL"
"sch1r %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; ----------------------------------------------------------------------
;; PROLOGUE/EPILOGUE
;; ----------------------------------------------------------------------
(define_expand "prologue"
[(const_int 0)]
""
"expand_prologue (); DONE;")
(define_expand "epilogue"
[(return)]
""
"
{
expand_epilogue ();
DONE;
}")
(define_insn "return_simple"
[(return)]
"reload_completed"
"jmp [r31]"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "return_internal"
[(return)
(use (reg:SI 31))]
""
"jmp [r31]"
[(set_attr "length" "2")
(set_attr "cc" "none")])
;; ----------------------------------------------------------------------
;; v850e2V3 floating-point hardware support
;; ----------------------------------------------------------------------
(define_insn "addsf3"
[(set (match_operand:SF 0 "register_operand" "=r")
(plus:SF (match_operand:SF 1 "register_operand" "r")
(match_operand:SF 2 "register_operand" "r")))]
"TARGET_V850E2V3"
"addf.s %1,%2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "adddf3"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(plus:DF (match_operand:DF 1 "even_reg_operand" "r")
(match_operand:DF 2 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"addf.d %1,%2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "subsf3"
[(set (match_operand:SF 0 "register_operand" "=r")
(minus:SF (match_operand:SF 1 "register_operand" "r")
(match_operand:SF 2 "register_operand" "r")))]
"TARGET_V850E2V3"
"subf.s %2,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "subdf3"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(minus:DF (match_operand:DF 1 "even_reg_operand" "r")
(match_operand:DF 2 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"subf.d %2,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "mulsf3"
[(set (match_operand:SF 0 "register_operand" "=r")
(mult:SF (match_operand:SF 1 "register_operand" "r")
(match_operand:SF 2 "register_operand" "r")))]
"TARGET_V850E2V3"
"mulf.s %1,%2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "muldf3"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(mult:DF (match_operand:DF 1 "even_reg_operand" "r")
(match_operand:DF 2 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"mulf.d %1,%2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "divsf3"
[(set (match_operand:SF 0 "register_operand" "=r")
(div:SF (match_operand:SF 1 "register_operand" "r")
(match_operand:SF 2 "register_operand" "r")))]
"TARGET_V850E2V3"
"divf.s %2,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "divdf3"
[(set (match_operand:DF 0 "register_operand" "=r")
(div:DF (match_operand:DF 1 "even_reg_operand" "r")
(match_operand:DF 2 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"divf.d %2,%1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "minsf3"
[(set (match_operand:SF 0 "register_operand" "=r")
(smin:SF (match_operand:SF 1 "reg_or_0_operand" "r")
(match_operand:SF 2 "reg_or_0_operand" "r")))]
"TARGET_V850E2V3"
"minf.s %z1,%z2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "mindf3"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(smin:DF (match_operand:DF 1 "even_reg_operand" "r")
(match_operand:DF 2 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"minf.d %1,%2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "maxsf3"
[(set (match_operand:SF 0 "register_operand" "=r")
(smax:SF (match_operand:SF 1 "reg_or_0_operand" "r")
(match_operand:SF 2 "reg_or_0_operand" "r")))]
"TARGET_V850E2V3"
"maxf.s %z1,%z2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "maxdf3"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(smax:DF (match_operand:DF 1 "even_reg_operand" "r")
(match_operand:DF 2 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"maxf.d %1,%2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "abssf2"
[(set (match_operand:SF 0 "register_operand" "=r")
(abs:SF (match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"absf.s %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "absdf2"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(abs:DF (match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"absf.d %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "negsf2"
[(set (match_operand:SF 0 "register_operand" "=r")
(neg:SF (match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"negf.s %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "negdf2"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(neg:DF (match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"negf.d %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;; square-root
(define_insn "sqrtsf2"
[(set (match_operand:SF 0 "register_operand" "=r")
(sqrt:SF (match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"sqrtf.s %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "sqrtdf2"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(sqrt:DF (match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"sqrtf.d %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;; float -> int
(define_insn "fix_truncsfsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(fix:SI (fix:SF (match_operand:SF 1 "register_operand" "r"))))]
"TARGET_V850E2V3"
"trncf.sw %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "fix_truncdfsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(fix:SI (fix:DF (match_operand:DF 1 "even_reg_operand" "r"))))]
"TARGET_V850E2V3"
"trncf.dw %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;; int -> float
(define_insn "floatsisf2"
[(set (match_operand:SF 0 "register_operand" "=r")
(float:SF (match_operand:SI 1 "reg_or_0_operand" "rI")))]
"TARGET_V850E2V3"
"cvtf.ws %z1, %0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "floatsidf2"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(float:DF (match_operand:SI 1 "reg_or_0_operand" "rI")))]
"TARGET_V850E2V3"
"cvtf.wd %z1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;; single-float -> double-float
(define_insn "extendsfdf2"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(float_extend:DF
(match_operand:SF 1 "reg_or_0_operand" "rI")))]
"TARGET_V850E2V3"
"cvtf.sd %z1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;; double-float -> single-float
(define_insn "truncdfsf2"
[(set (match_operand:SF 0 "register_operand" "=r")
(float_truncate:SF
(match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"cvtf.ds %1,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;;
;; ---------------- special insns
;;
;;; reciprocal
(define_insn "recipsf2"
[(set (match_operand:SF 0 "register_operand" "=r")
(div:SF (match_operand:SF 1 "const_float_1_operand" "")
(match_operand:SF 2 "register_operand" "r")))]
"TARGET_V850E2V3"
"recipf.s %2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "recipdf2"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(div:DF (match_operand:DF 1 "const_float_1_operand" "")
(match_operand:DF 2 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"recipf.d %2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;;; reciprocal of square-root
(define_insn "rsqrtsf2"
[(set (match_operand:SF 0 "register_operand" "=r")
(div:SF (match_operand:SF 1 "const_float_1_operand" "")
(sqrt:SF (match_operand:SF 2 "register_operand" "r"))))]
"TARGET_V850E2V3"
"rsqrtf.s %2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "rsqrtdf2"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(div:DF (match_operand:DF 1 "const_float_1_operand" "")
(sqrt:DF (match_operand:DF 2 "even_reg_operand" "r"))))]
"TARGET_V850E2V3"
"rsqrtf.d %2,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;;; multiply-add
(define_insn "fmasf4"
[(set (match_operand:SF 0 "register_operand" "=r")
(fma:SF (match_operand:SF 1 "register_operand" "r")
(match_operand:SF 2 "register_operand" "r")
(match_operand:SF 3 "register_operand" "r")))]
"TARGET_V850E2V3"
"maddf.s %2,%1,%3,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;;; multiply-subtract
(define_insn "fmssf4"
[(set (match_operand:SF 0 "register_operand" "=r")
(fma:SF (match_operand:SF 1 "register_operand" "r")
(match_operand:SF 2 "register_operand" "r")
(neg:SF (match_operand:SF 3 "register_operand" "r"))))]
"TARGET_V850E2V3"
"msubf.s %2,%1,%3,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;;; negative-multiply-add
(define_insn "fnmasf4"
[(set (match_operand:SF 0 "register_operand" "=r")
(fma:SF (neg:SF (match_operand:SF 1 "register_operand" "r"))
(match_operand:SF 2 "register_operand" "r")
(match_operand:SF 3 "register_operand" "r")))]
"TARGET_V850E2V3"
"nmaddf.s %2,%1,%3,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;; negative-multiply-subtract
(define_insn "fnmssf4"
[(set (match_operand:SF 0 "register_operand" "=r")
(fma:SF (neg:SF (match_operand:SF 1 "register_operand" "r"))
(match_operand:SF 2 "register_operand" "r")
(neg:SF (match_operand:SF 3 "register_operand" "r"))))]
"TARGET_V850E2V3"
"nmsubf.s %2,%1,%3,%0"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;
; ---------------- comparison/conditionals
;
; SF
(define_insn "cmpsf_le_insn"
[(set (reg:CC_FPU_LE FCC_REGNUM)
(compare:CC_FPU_LE (match_operand:SF 0 "register_operand" "r")
(match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.s le,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpsf_lt_insn"
[(set (reg:CC_FPU_LT FCC_REGNUM)
(compare:CC_FPU_LT (match_operand:SF 0 "register_operand" "r")
(match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.s lt,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpsf_ge_insn"
[(set (reg:CC_FPU_GE FCC_REGNUM)
(compare:CC_FPU_GE (match_operand:SF 0 "register_operand" "r")
(match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.s ge,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpsf_gt_insn"
[(set (reg:CC_FPU_GT FCC_REGNUM)
(compare:CC_FPU_GT (match_operand:SF 0 "register_operand" "r")
(match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.s gt,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpsf_eq_insn"
[(set (reg:CC_FPU_EQ FCC_REGNUM)
(compare:CC_FPU_EQ (match_operand:SF 0 "register_operand" "r")
(match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.s eq,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpsf_ne_insn"
[(set (reg:CC_FPU_NE FCC_REGNUM)
(compare:CC_FPU_NE (match_operand:SF 0 "register_operand" "r")
(match_operand:SF 1 "register_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.s neq,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
; DF
(define_insn "cmpdf_le_insn"
[(set (reg:CC_FPU_LE FCC_REGNUM)
(compare:CC_FPU_LE (match_operand:DF 0 "even_reg_operand" "r")
(match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.d le,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpdf_lt_insn"
[(set (reg:CC_FPU_LT FCC_REGNUM)
(compare:CC_FPU_LT (match_operand:DF 0 "even_reg_operand" "r")
(match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.d lt,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpdf_ge_insn"
[(set (reg:CC_FPU_GE FCC_REGNUM)
(compare:CC_FPU_GE (match_operand:DF 0 "even_reg_operand" "r")
(match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.d ge,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpdf_gt_insn"
[(set (reg:CC_FPU_GT FCC_REGNUM)
(compare:CC_FPU_GT (match_operand:DF 0 "even_reg_operand" "r")
(match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.d gt,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpdf_eq_insn"
[(set (reg:CC_FPU_EQ FCC_REGNUM)
(compare:CC_FPU_EQ (match_operand:DF 0 "even_reg_operand" "r")
(match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.d eq,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
(define_insn "cmpdf_ne_insn"
[(set (reg:CC_FPU_NE FCC_REGNUM)
(compare:CC_FPU_NE (match_operand:DF 0 "even_reg_operand" "r")
(match_operand:DF 1 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"cmpf.d neq,%z0,%z1"
[(set_attr "length" "4")
(set_attr "cc" "none_0hit")
(set_attr "type" "fpu")])
;;
;; Transfer a v850e2v3 fcc to the Z bit of CC0 (this is necessary to do a
;; conditional branch based on a floating-point compare)
;;
(define_insn "trfsr"
[(set (match_operand 0 "" "") (match_operand 1 "" ""))]
"TARGET_V850E2V3
&& GET_MODE(operands[0]) == GET_MODE(operands[1])
&& GET_CODE(operands[0]) == REG && REGNO (operands[0]) == CC_REGNUM
&& GET_CODE(operands[1]) == REG && REGNO (operands[1]) == FCC_REGNUM
&& (GET_MODE(operands[0]) == CC_FPU_LEmode
|| GET_MODE(operands[0]) == CC_FPU_GEmode
|| GET_MODE(operands[0]) == CC_FPU_LTmode
|| GET_MODE(operands[0]) == CC_FPU_GTmode
|| GET_MODE(operands[0]) == CC_FPU_EQmode
|| GET_MODE(operands[0]) == CC_FPU_NEmode)"
"trfsr"
[(set_attr "length" "4")
(set_attr "cc" "set_z")
(set_attr "type" "fpu")])
;;
;; Floating-point conditional moves for the v850e2v3.
;;
;; The actual v850e2v3 conditional move instructions
;;
(define_insn "movsfcc_z_insn"
[(set (match_operand:SF 0 "register_operand" "=r")
(if_then_else:SF
(match_operand 3 "v850_float_z_comparison_operator" "")
(match_operand:SF 1 "reg_or_0_operand" "rIG")
(match_operand:SF 2 "reg_or_0_operand" "rIG")))]
"TARGET_V850E2V3"
"cmovf.s 0,%z1,%z2,%0"
[(set_attr "cc" "clobber")]) ;; ??? or none_0hit
(define_insn "movsfcc_nz_insn"
[(set (match_operand:SF 0 "register_operand" "=r")
(if_then_else:SF
(match_operand 3 "v850_float_nz_comparison_operator" "")
(match_operand:SF 1 "reg_or_0_operand" "rIG")
(match_operand:SF 2 "reg_or_0_operand" "rIG")))]
"TARGET_V850E2V3"
"cmovf.s 0,%z2,%z1,%0"
[(set_attr "cc" "clobber")]) ;; ??? or none_0hit
(define_insn "movdfcc_z_insn"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(if_then_else:DF
(match_operand 3 "v850_float_z_comparison_operator" "")
(match_operand:DF 1 "even_reg_operand" "r")
(match_operand:DF 2 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"cmovf.d 0,%z1,%z2,%0"
[(set_attr "cc" "clobber")]) ;; ??? or none_0hit
(define_insn "movdfcc_nz_insn"
[(set (match_operand:DF 0 "even_reg_operand" "=r")
(if_then_else:DF
(match_operand 3 "v850_float_nz_comparison_operator" "")
(match_operand:DF 1 "even_reg_operand" "r")
(match_operand:DF 2 "even_reg_operand" "r")))]
"TARGET_V850E2V3"
"cmovf.d 0,%z2,%z1,%0"
[(set_attr "cc" "clobber")]) ;; ??? or none_0hit
(define_insn "movedfcc_z_zero"
[(set (match_operand:DF 0 "register_operand" "=r")
(if_then_else:DF
(match_operand 3 "v850_float_z_comparison_operator" "")
(match_operand:DF 1 "reg_or_0_operand" "rIG")
(match_operand:DF 2 "reg_or_0_operand" "rIG")))]
"TARGET_V850E2V3"
"cmovf.s 0,%z1,%z2,%0 ; cmovf.s 0,%Z1,%Z2,%R0"
[(set_attr "length" "8")
(set_attr "cc" "clobber")]) ;; ??? or none_0hit
(define_insn "movedfcc_nz_zero"
[(set (match_operand:DF 0 "register_operand" "=r")
(if_then_else:DF
(match_operand 3 "v850_float_nz_comparison_operator" "")
(match_operand:DF 1 "reg_or_0_operand" "rIG")
(match_operand:DF 2 "reg_or_0_operand" "rIG")))]
"TARGET_V850E2V3"
"cmovf.s 0,%z2,%z1,%0 ; cmovf.s 0,%Z2,%Z1,%R0"
[(set_attr "length" "8")
(set_attr "cc" "clobber")]) ;; ??? or none_0hit
;; ----------------------------------------------------------------------
;; HELPER INSTRUCTIONS for saving the prologue and epilogue registers
;; ----------------------------------------------------------------------
;; This pattern will match a stack adjust RTX followed by any number of push
;; RTXs. These RTXs will then be turned into a suitable call to a worker
;; function.
;;
;; Actually, convert the RTXs into a PREPARE instruction.
;;
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_prepare"
[(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 2 "immediate_operand" "i")))
(match_operand:SI 3 "register_is_ok_for_epilogue" "r"))])]
"TARGET_PROLOG_FUNCTION && (TARGET_V850E || TARGET_V850E2_ALL)"
"* return construct_prepare_instruction (operands[0]);
"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_prologue"
[(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 2 "immediate_operand" "i")))
(match_operand:SI 3 "register_is_ok_for_epilogue" "r"))])]
"TARGET_PROLOG_FUNCTION"
"* return construct_save_jarl (operands[0]);
"
[(set (attr "length") (if_then_else (eq_attr "long_calls" "yes")
(const_string "16")
(const_string "4")))
(set_attr "cc" "clobber")])
;;
;; Actually, turn the RTXs into a DISPOSE instruction.
;;
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_dispose"
[(return)
(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (match_operand:SI 2 "register_is_ok_for_epilogue" "=r")
(mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 3 "immediate_operand" "i"))))])]
"TARGET_PROLOG_FUNCTION && (TARGET_V850E || TARGET_V850E2_ALL)"
"* return construct_dispose_instruction (operands[0]);
"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; This pattern will match a return RTX followed by any number of pop RTXs
;; and possible a stack adjustment as well. These RTXs will be turned into
;; a suitable call to a worker function.
(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_epilogue"
[(return)
(set (reg:SI 3)
(plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
(set (match_operand:SI 2 "register_is_ok_for_epilogue" "=r")
(mem:SI (plus:SI (reg:SI 3)
(match_operand:SI 3 "immediate_operand" "i"))))])]
"TARGET_PROLOG_FUNCTION"
"* return construct_restore_jr (operands[0]);
"
[(set (attr "length") (if_then_else (eq_attr "long_calls" "yes")
(const_string "12")
(const_string "4")))
(set_attr "cc" "clobber")])
;; Initialize an interrupt function. Do not depend on TARGET_PROLOG_FUNCTION.
(define_insn "callt_save_interrupt"
[(unspec_volatile [(const_int 0)] 2)]
"(TARGET_V850E || TARGET_V850E2_ALL) && !TARGET_DISABLE_CALLT"
;; The CALLT instruction stores the next address of CALLT to CTPC register
;; without saving its previous value. So if the interrupt handler
;; or its caller could possibly execute the CALLT insn, save_interrupt
;; MUST NOT be called via CALLT.
"*
{
output_asm_insn (\"addi -28, sp, sp\", operands);
output_asm_insn (\"st.w r1, 24[sp]\", operands);
output_asm_insn (\"st.w r10, 12[sp]\", operands);
output_asm_insn (\"st.w r11, 16[sp]\", operands);
output_asm_insn (\"stsr ctpc, r10\", operands);
output_asm_insn (\"st.w r10, 20[sp]\", operands);
output_asm_insn (\"stsr ctpsw, r10\", operands);
output_asm_insn (\"st.w r10, 24[sp]\", operands);
output_asm_insn (\"callt ctoff(__callt_save_interrupt)\", operands);
return \"\";
}"
[(set_attr "length" "26")
(set_attr "cc" "clobber")])
(define_insn "callt_return_interrupt"
[(unspec_volatile [(const_int 0)] 3)]
"(TARGET_V850E || TARGET_V850E2_ALL) && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_return_interrupt)"
[(set_attr "length" "2")
(set_attr "cc" "clobber")])
(define_insn "save_interrupt"
[(set (reg:SI 3) (plus:SI (reg:SI 3) (const_int -20)))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -20))) (reg:SI 30))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -16))) (reg:SI 4))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -12))) (reg:SI 1))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -8))) (reg:SI 10))
(set (mem:SI (plus:SI (reg:SI 3) (const_int -4))) (reg:SI 11))]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"addi -20,sp,sp \; st.w r11,16[sp] \; st.w r10,12[sp] \; jarl __save_interrupt,r10\";
else
{
output_asm_insn (\"addi -20, sp, sp\", operands);
output_asm_insn (\"st.w r11, 16[sp]\", operands);
output_asm_insn (\"st.w r10, 12[sp]\", operands);
output_asm_insn (\"st.w ep, 0[sp]\", operands);
output_asm_insn (\"st.w gp, 4[sp]\", operands);
output_asm_insn (\"st.w r1, 8[sp]\", operands);
output_asm_insn (\"movhi hi(__ep), r0, ep\", operands);
output_asm_insn (\"movea lo(__ep), ep, ep\", operands);
output_asm_insn (\"movhi hi(__gp), r0, gp\", operands);
output_asm_insn (\"movea lo(__gp), gp, gp\", operands);
return \"\";
}
}"
[(set (attr "length")
(if_then_else (match_test "TARGET_LONG_CALLS")
(const_int 10)
(const_int 34)))
(set_attr "cc" "clobber")])
;; Restore r1, r4, r10, and return from the interrupt
(define_insn "return_interrupt"
[(return)
(set (reg:SI 3) (plus:SI (reg:SI 3) (const_int 20)))
(set (reg:SI 11) (mem:SI (plus:SI (reg:SI 3) (const_int 16))))
(set (reg:SI 10) (mem:SI (plus:SI (reg:SI 3) (const_int 12))))
(set (reg:SI 1) (mem:SI (plus:SI (reg:SI 3) (const_int 8))))
(set (reg:SI 4) (mem:SI (plus:SI (reg:SI 3) (const_int 4))))
(set (reg:SI 30) (mem:SI (reg:SI 3)))]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"jr __return_interrupt\";
else
{
output_asm_insn (\"ld.w 0[sp], ep\", operands);
output_asm_insn (\"ld.w 4[sp], gp\", operands);
output_asm_insn (\"ld.w 8[sp], r1\", operands);
output_asm_insn (\"ld.w 12[sp], r10\", operands);
output_asm_insn (\"ld.w 16[sp], r11\", operands);
output_asm_insn (\"addi 20, sp, sp\", operands);
output_asm_insn (\"reti\", operands);
return \"\";
}
}"
[(set (attr "length")
(if_then_else (match_test "TARGET_LONG_CALLS")
(const_int 4)
(const_int 24)))
(set_attr "cc" "clobber")])
;; Save all registers except for the registers saved in save_interrupt when
;; an interrupt function makes a call.
;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
;; all of memory. This blocks insns from being moved across this point.
;; This is needed because the rest of the compiler is not ready to handle
;; insns this complicated.
(define_insn "callt_save_all_interrupt"
[(unspec_volatile [(const_int 0)] 0)]
"(TARGET_V850E || TARGET_V850E2_ALL) && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_save_all_interrupt)"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "save_all_interrupt"
[(unspec_volatile [(const_int 0)] 0)]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"jarl __save_all_interrupt,r10\";
output_asm_insn (\"addi -120, sp, sp\", operands);
if (TARGET_EP)
{
output_asm_insn (\"mov ep, r1\", operands);
output_asm_insn (\"mov sp, ep\", operands);
output_asm_insn (\"sst.w r31, 116[ep]\", operands);
output_asm_insn (\"sst.w r2, 112[ep]\", operands);
output_asm_insn (\"sst.w gp, 108[ep]\", operands);
output_asm_insn (\"sst.w r6, 104[ep]\", operands);
output_asm_insn (\"sst.w r7, 100[ep]\", operands);
output_asm_insn (\"sst.w r8, 96[ep]\", operands);
output_asm_insn (\"sst.w r9, 92[ep]\", operands);
output_asm_insn (\"sst.w r11, 88[ep]\", operands);
output_asm_insn (\"sst.w r12, 84[ep]\", operands);
output_asm_insn (\"sst.w r13, 80[ep]\", operands);
output_asm_insn (\"sst.w r14, 76[ep]\", operands);
output_asm_insn (\"sst.w r15, 72[ep]\", operands);
output_asm_insn (\"sst.w r16, 68[ep]\", operands);
output_asm_insn (\"sst.w r17, 64[ep]\", operands);
output_asm_insn (\"sst.w r18, 60[ep]\", operands);
output_asm_insn (\"sst.w r19, 56[ep]\", operands);
output_asm_insn (\"sst.w r20, 52[ep]\", operands);
output_asm_insn (\"sst.w r21, 48[ep]\", operands);
output_asm_insn (\"sst.w r22, 44[ep]\", operands);
output_asm_insn (\"sst.w r23, 40[ep]\", operands);
output_asm_insn (\"sst.w r24, 36[ep]\", operands);
output_asm_insn (\"sst.w r25, 32[ep]\", operands);
output_asm_insn (\"sst.w r26, 28[ep]\", operands);
output_asm_insn (\"sst.w r27, 24[ep]\", operands);
output_asm_insn (\"sst.w r28, 20[ep]\", operands);
output_asm_insn (\"sst.w r29, 16[ep]\", operands);
output_asm_insn (\"mov r1, ep\", operands);
}
else
{
output_asm_insn (\"st.w r31, 116[sp]\", operands);
output_asm_insn (\"st.w r2, 112[sp]\", operands);
output_asm_insn (\"st.w gp, 108[sp]\", operands);
output_asm_insn (\"st.w r6, 104[sp]\", operands);
output_asm_insn (\"st.w r7, 100[sp]\", operands);
output_asm_insn (\"st.w r8, 96[sp]\", operands);
output_asm_insn (\"st.w r9, 92[sp]\", operands);
output_asm_insn (\"st.w r11, 88[sp]\", operands);
output_asm_insn (\"st.w r12, 84[sp]\", operands);
output_asm_insn (\"st.w r13, 80[sp]\", operands);
output_asm_insn (\"st.w r14, 76[sp]\", operands);
output_asm_insn (\"st.w r15, 72[sp]\", operands);
output_asm_insn (\"st.w r16, 68[sp]\", operands);
output_asm_insn (\"st.w r17, 64[sp]\", operands);
output_asm_insn (\"st.w r18, 60[sp]\", operands);
output_asm_insn (\"st.w r19, 56[sp]\", operands);
output_asm_insn (\"st.w r20, 52[sp]\", operands);
output_asm_insn (\"st.w r21, 48[sp]\", operands);
output_asm_insn (\"st.w r22, 44[sp]\", operands);
output_asm_insn (\"st.w r23, 40[sp]\", operands);
output_asm_insn (\"st.w r24, 36[sp]\", operands);
output_asm_insn (\"st.w r25, 32[sp]\", operands);
output_asm_insn (\"st.w r26, 28[sp]\", operands);
output_asm_insn (\"st.w r27, 24[sp]\", operands);
output_asm_insn (\"st.w r28, 20[sp]\", operands);
output_asm_insn (\"st.w r29, 16[sp]\", operands);
}
return \"\";
}"
[(set (attr "length")
(if_then_else (match_test "TARGET_LONG_CALLS")
(const_int 4)
(const_int 62)
))
(set_attr "cc" "clobber")])
(define_insn "_save_all_interrupt"
[(unspec_volatile [(const_int 0)] 0)]
"TARGET_V850 && ! TARGET_LONG_CALLS"
"jarl __save_all_interrupt,r10"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])
;; Restore all registers saved when an interrupt function makes a call.
;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
;; all of memory. This blocks insns from being moved across this point.
;; This is needed because the rest of the compiler is not ready to handle
;; insns this complicated.
(define_insn "callt_restore_all_interrupt"
[(unspec_volatile [(const_int 0)] 1)]
"(TARGET_V850E || TARGET_V850E2_ALL) && !TARGET_DISABLE_CALLT"
"callt ctoff(__callt_restore_all_interrupt)"
[(set_attr "length" "2")
(set_attr "cc" "none")])
(define_insn "restore_all_interrupt"
[(unspec_volatile [(const_int 0)] 1)]
""
"*
{
if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
return \"jarl __restore_all_interrupt,r10\";
if (TARGET_EP)
{
output_asm_insn (\"mov ep, r1\", operands);
output_asm_insn (\"mov sp, ep\", operands);
output_asm_insn (\"sld.w 116[ep], r31\", operands);
output_asm_insn (\"sld.w 112[ep], r2\", operands);
output_asm_insn (\"sld.w 108[ep], gp\", operands);
output_asm_insn (\"sld.w 104[ep], r6\", operands);
output_asm_insn (\"sld.w 100[ep], r7\", operands);
output_asm_insn (\"sld.w 96[ep], r8\", operands);
output_asm_insn (\"sld.w 92[ep], r9\", operands);
output_asm_insn (\"sld.w 88[ep], r11\", operands);
output_asm_insn (\"sld.w 84[ep], r12\", operands);
output_asm_insn (\"sld.w 80[ep], r13\", operands);
output_asm_insn (\"sld.w 76[ep], r14\", operands);
output_asm_insn (\"sld.w 72[ep], r15\", operands);
output_asm_insn (\"sld.w 68[ep], r16\", operands);
output_asm_insn (\"sld.w 64[ep], r17\", operands);
output_asm_insn (\"sld.w 60[ep], r18\", operands);
output_asm_insn (\"sld.w 56[ep], r19\", operands);
output_asm_insn (\"sld.w 52[ep], r20\", operands);
output_asm_insn (\"sld.w 48[ep], r21\", operands);
output_asm_insn (\"sld.w 44[ep], r22\", operands);
output_asm_insn (\"sld.w 40[ep], r23\", operands);
output_asm_insn (\"sld.w 36[ep], r24\", operands);
output_asm_insn (\"sld.w 32[ep], r25\", operands);
output_asm_insn (\"sld.w 28[ep], r26\", operands);
output_asm_insn (\"sld.w 24[ep], r27\", operands);
output_asm_insn (\"sld.w 20[ep], r28\", operands);
output_asm_insn (\"sld.w 16[ep], r29\", operands);
output_asm_insn (\"mov r1, ep\", operands);
}
else
{
output_asm_insn (\"ld.w 116[sp], r31\", operands);
output_asm_insn (\"ld.w 112[sp], r2\", operands);
output_asm_insn (\"ld.w 108[sp], gp\", operands);
output_asm_insn (\"ld.w 104[sp], r6\", operands);
output_asm_insn (\"ld.w 100[sp], r7\", operands);
output_asm_insn (\"ld.w 96[sp], r8\", operands);
output_asm_insn (\"ld.w 92[sp], r9\", operands);
output_asm_insn (\"ld.w 88[sp], r11\", operands);
output_asm_insn (\"ld.w 84[sp], r12\", operands);
output_asm_insn (\"ld.w 80[sp], r13\", operands);
output_asm_insn (\"ld.w 76[sp], r14\", operands);
output_asm_insn (\"ld.w 72[sp], r15\", operands);
output_asm_insn (\"ld.w 68[sp], r16\", operands);
output_asm_insn (\"ld.w 64[sp], r17\", operands);
output_asm_insn (\"ld.w 60[sp], r18\", operands);
output_asm_insn (\"ld.w 56[sp], r19\", operands);
output_asm_insn (\"ld.w 52[sp], r20\", operands);
output_asm_insn (\"ld.w 48[sp], r21\", operands);
output_asm_insn (\"ld.w 44[sp], r22\", operands);
output_asm_insn (\"ld.w 40[sp], r23\", operands);
output_asm_insn (\"ld.w 36[sp], r24\", operands);
output_asm_insn (\"ld.w 32[sp], r25\", operands);
output_asm_insn (\"ld.w 28[sp], r26\", operands);
output_asm_insn (\"ld.w 24[sp], r27\", operands);
output_asm_insn (\"ld.w 20[sp], r28\", operands);
output_asm_insn (\"ld.w 16[sp], r29\", operands);
}
output_asm_insn (\"addi 120, sp, sp\", operands);
return \"\";
}"
[(set (attr "length")
(if_then_else (match_test "TARGET_LONG_CALLS")
(const_int 4)
(const_int 62)
))
(set_attr "cc" "clobber")])
(define_insn "_restore_all_interrupt"
[(unspec_volatile [(const_int 0)] 1)]
"TARGET_V850 && ! TARGET_LONG_CALLS"
"jarl __restore_all_interrupt,r10"
[(set_attr "length" "4")
(set_attr "cc" "clobber")])