URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [testsuite/] [ada/] [acats/] [support/] [macrosub.ada] - Rev 720
Compare with Previous | Blame | View Log
-- MACROSUB.ADA -- -- Grant of Unlimited Rights -- -- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687, -- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained -- unlimited rights in the software and documentation contained herein. -- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making -- this public release, the Government intends to confer upon all -- recipients unlimited rights equal to those held by the Government. -- These rights include rights to use, duplicate, release or disclose the -- released technical data and computer software in whole or in part, in -- any manner and for any purpose whatsoever, and to have or permit others -- to do so. -- -- DISCLAIMER -- -- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR -- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED -- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE -- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE -- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A -- PARTICULAR PURPOSE OF SAID MATERIAL. --* -- ----------------------------------------------------------------------- -- -- -- THIS PROGRAM IS CALLED MACROSUB. IT IS USED TO REPLACE THE -- -- MACROS IN THE ACVC TEST SUITE WITH THEIR PROPER VALUES. THE -- -- STEPS LISTED BELOW SHOULD BE FOLLOWED TO ENSURE PROPER RUNNING -- -- OF THE MACROSUB PROGRAM: -- -- -- -- 1) Edit the file MACRO.DFS (included with the testtape) -- -- and insert your macro values. The macros which use -- -- the value of MAX_IN_LEN are calculated automatically -- -- and do not need to be entered. -- -- -- -- 2) Create a file called TSTTESTS.DAT which includes all -- -- of the .TST test file names and their directory -- -- specifications, if necessary. If a different name -- -- other than TSTTESTS.DAT is used, this name must be -- -- substituted in the MACROSUB.ADA file. -- -- -- -- 3) Compile and link MACROSUB. -- -- -- -- 4) Run the MACROSUB program. -- -- -- -- WHEN THE PROGRAM FINISHES RUNNING, THE MACROS WILL HAVE BEEN -- -- REPLACED WITH THE APPROPRIATE VALUES FROM MACRO.DFS. -- -- -- -- -- -- -- -- HISTORY: -- -- BCB 04/17/90 CHANGED MODE OF CALC_MAX_VALS TO OUT. CHANGED -- -- VALUE OF MAX_VAL_LENGTH FROM 512 TO 400. ADDED -- -- EXCEPTION HANDLER SO PROGRAM DOES NOT CRASH IF -- -- AN EXCEPTION IS RAISED. ADDED MESSAGES TO -- -- REPORT PROGRESS OF PROGRAM. CHANGED PROGRAM SO -- -- IT DOES NOT ABORT IF A FILE CANNOT BE FOUND. -- -- MODIFIED PROGRAM SO IT ACCEPTS FILENAMES WITH -- -- VERSION NUMBERS. -- ----------------------------------------------------------------------- WITH TEXT_IO; USE TEXT_IO; PACKAGE DEFS IS ----------------------------------------------------------------------- -- -- -- THIS PACKAGE IS USED BY MACROSUB.ADA, PARSEMAC.ADA, AND BY -- -- GETSUBS.ADA. THE PACKAGE CONTAINS VARIABLE DECLARATIONS WHICH -- -- NEED TO BE KNOWN BY ALL OF THE PROCEDURES AND PACKAGES WHICH -- -- MAKE UP THE PROGRAM. -- -- -- ----------------------------------------------------------------------- MAX_VAL_LENGTH : CONSTANT INTEGER := 400; SUBTYPE VAL_STRING IS STRING (1..MAX_VAL_LENGTH); TYPE REC_TYPE IS RECORD MACRO_NAME : STRING (1..80); NAME_LENGTH, VALUE_LENGTH : INTEGER; MACRO_VALUE : VAL_STRING; END RECORD; TYPE TABLE_TYPE IS ARRAY (1..100) OF REC_TYPE; SYMBOL_TABLE : TABLE_TYPE; NUM_MACROS : INTEGER; END DEFS; WITH TEXT_IO; USE TEXT_IO; WITH DEFS; USE DEFS; PACKAGE GETSUBS IS ------------------------------------------------------------------------ -- -- -- THIS PACKAGE IS USED BY MACROSUB.ADA FOR READING FROM MACRO.DFS -- -- THE VALUES FOR THE MACRO SUBSTITUTIONS FOR A TEST TAPE. -- -- -- ------------------------------------------------------------------------ MAC_FILE, LINE_LEN : EXCEPTION; PROCEDURE CALC_MAX_VALS(INDEX, LENGTH, MAX_IN_LEN : IN INTEGER; CALCULATED : OUT BOOLEAN); PROCEDURE FILL_TABLE; END GETSUBS; PACKAGE BODY GETSUBS IS ----------------------------------------------------------------------- -- -- -- PROCEDURE CALC_MAX_VALS CALCULATES THE VALUE FOR THE MACRO -- -- READ FROM MACRO.DFS IF ITS LENGTH IS EQUAL OR NEARLY EQUAL TO -- -- MAX_IN_LEN. IT THEN RETURNS A FLAG SET TO TRUE IF A VALUE WAS -- -- CALCULATED, FALSE IF ONE WAS NOT. -- -- -- ----------------------------------------------------------------------- PROCEDURE CALC_MAX_VALS(INDEX, LENGTH, MAX_IN_LEN : IN INTEGER; CALCULATED : OUT BOOLEAN) IS BEGIN IF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_ID1" THEN SYMBOL_TABLE (INDEX).MACRO_VALUE (1..MAX_IN_LEN) := (1..(MAX_IN_LEN-1) => 'A') & "1"; CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_ID2" THEN SYMBOL_TABLE (INDEX).MACRO_VALUE (1..MAX_IN_LEN) := (1..(MAX_IN_LEN-1) => 'A') & "2"; CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_ID3" THEN SYMBOL_TABLE (INDEX).MACRO_VALUE (1..MAX_IN_LEN) := (1..(MAX_IN_LEN + 1)/2 => 'A') & "3" & ((MAX_IN_LEN + 1)/2 + 2..MAX_IN_LEN => 'A'); CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_ID4" THEN SYMBOL_TABLE (INDEX).MACRO_VALUE (1..MAX_IN_LEN) := (1..(MAX_IN_LEN + 1)/2 => 'A') & "4" & ((MAX_IN_LEN + 1)/2 + 2..MAX_IN_LEN => 'A'); CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_STRING1" THEN SYMBOL_TABLE (INDEX).MACRO_VALUE (1..(MAX_IN_LEN + 1)/2 + 2) := '"' & (1..(MAX_IN_LEN + 1)/2 => 'A') & '"'; CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_STRING2" THEN SYMBOL_TABLE (INDEX).MACRO_VALUE (1..MAX_IN_LEN - (MAX_IN_LEN + 1)/2 + 2) := '"' & (2..MAX_IN_LEN - (MAX_IN_LEN + 1)/2 => 'A') & '1' & '"'; CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "MAX_STRING_LITERAL" THEN SYMBOL_TABLE (INDEX). MACRO_VALUE (1..MAX_IN_LEN) := '"' & (1..MAX_IN_LEN-2 => 'A') & '"'; CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_INT_LIT" THEN SYMBOL_TABLE (INDEX).MACRO_VALUE (1..MAX_IN_LEN) := (1..MAX_IN_LEN-3 => '0') & "298"; CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_REAL_LIT" THEN SYMBOL_TABLE (INDEX).MACRO_VALUE (1..MAX_IN_LEN) := (1..MAX_IN_LEN-5 => '0') & "690.0"; CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "MAX_LEN_INT_BASED_LITERAL" THEN SYMBOL_TABLE (INDEX). MACRO_VALUE (1..MAX_IN_LEN) := "2:" & (1..MAX_IN_LEN - 5 => '0') & "11:"; CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "MAX_LEN_REAL_BASED_LITERAL" THEN SYMBOL_TABLE (INDEX). MACRO_VALUE (1..MAX_IN_LEN) := "16:" & (1..MAX_IN_LEN - 7 => '0') & "F.E:"; CALCULATED := TRUE; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BLANKS" THEN SYMBOL_TABLE (INDEX).MACRO_VALUE (1..MAX_IN_LEN-20) := (1..MAX_IN_LEN-20 => ' '); CALCULATED := TRUE; ELSE CALCULATED := FALSE; END IF; IF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BLANKS" THEN SYMBOL_TABLE (INDEX).VALUE_LENGTH := MAX_IN_LEN - 20; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_STRING1" THEN SYMBOL_TABLE (INDEX).VALUE_LENGTH := (MAX_IN_LEN + 1)/2 + 2; ELSIF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BIG_STRING2" THEN SYMBOL_TABLE (INDEX).VALUE_LENGTH := MAX_IN_LEN - (MAX_IN_LEN + 1)/2 + 2; ELSE SYMBOL_TABLE (INDEX).VALUE_LENGTH := MAX_IN_LEN; END IF; END CALC_MAX_VALS; ----------------------------------------------------------------------- -- -- -- PROCEDURE FILL_TABLE READS THE MACRO NAMES AND MACRO VALUES IN -- -- FROM MACRO.DFS AND STORES THEM IN THE SYMBOL TABLE. PROCEDURE -- -- CALC_MAX_VALS IS CALLED TO DETERMINE IF THE MACRO VALUE SHOULD -- -- BE CALCULATED OR READ FROM MACRO.DFS. -- -- -- ----------------------------------------------------------------------- PROCEDURE FILL_TABLE IS INFILE1 : FILE_TYPE; MACRO_FILE : CONSTANT STRING := "MACRO.DFS"; A_LINE : VAL_STRING; I, INDEX, LENGTH, HOLD, A_LENGTH, NAME : INTEGER; MAX_IN_LEN : INTEGER := 1; CALCULATED : BOOLEAN; BEGIN INDEX := 1; BEGIN OPEN (INFILE1, IN_FILE, MACRO_FILE); EXCEPTION WHEN NAME_ERROR => PUT_LINE ("** ERROR: MACRO FILE " & MACRO_FILE & " NOT FOUND."); RAISE MAC_FILE; END; WHILE NOT END_OF_FILE (INFILE1) LOOP GET_LINE (INFILE1, A_LINE, A_LENGTH); IF A_LENGTH > 0 AND A_LINE (1..2) /= "--" AND A_LINE (1) /= ' ' AND A_LINE (1) /= ASCII.HT THEN I := 1; WHILE I <= A_LENGTH AND THEN ((A_LINE (I) IN 'A'..'Z') OR (A_LINE (I) IN '0'..'9') OR A_LINE (I) = '_') LOOP I := I + 1; END LOOP; I := I - 1; LENGTH := I; BEGIN SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) := A_LINE (1..I); EXCEPTION WHEN CONSTRAINT_ERROR => PUT_LINE ("** ERROR: LINE LENGTH IS " & "GREATER THAN MAX_VAL_LENGTH."); RAISE LINE_LEN; END; SYMBOL_TABLE (INDEX).NAME_LENGTH := I; CALC_MAX_VALS (INDEX, LENGTH, MAX_IN_LEN, CALCULATED); IF NOT CALCULATED THEN I := I + 1; WHILE A_LINE (I) = ' ' OR A_LINE (I) = ASCII.HT LOOP I := I + 1; IF SYMBOL_TABLE (INDEX).MACRO_NAME (1..LENGTH) = "BLANKS" THEN EXIT; END IF; END LOOP; HOLD := I; -- MACRO VALUE BEGINS AT POSITION HOLD. -- NOW FIND WHERE IT ENDS BY STARTING AT THE END OF THE INPUT -- LINE AND SEARCHING BACKWARD FOR A NON-BLANK. I := A_LENGTH; WHILE I > HOLD AND THEN (A_LINE (I) = ' ' OR A_LINE(I) = ASCII.HT) LOOP I := I - 1; END LOOP; LENGTH := I - HOLD + 1; SYMBOL_TABLE (INDEX).MACRO_VALUE (1..LENGTH) := A_LINE (HOLD..I); SYMBOL_TABLE (INDEX).VALUE_LENGTH := LENGTH; NAME := SYMBOL_TABLE (INDEX).NAME_LENGTH; IF SYMBOL_TABLE (INDEX).MACRO_NAME (1..NAME) = "MAX_IN_LEN" THEN MAX_IN_LEN := INTEGER'VALUE (SYMBOL_TABLE (INDEX). MACRO_VALUE (1..LENGTH)); END IF; END IF; INDEX := INDEX + 1; END IF; END LOOP; NUM_MACROS := INDEX - 1; CLOSE (INFILE1); END FILL_TABLE; BEGIN NULL; END GETSUBS; WITH TEXT_IO; USE TEXT_IO; WITH DEFS; USE DEFS; PACKAGE PARSEMAC IS ------------------------------------------------------------------------ -- -- -- THIS PACKAGE IS USED BY MACROSUB.ADA FOR FINDING A MACRO TO -- -- SUBSTITUTE. MACRO SUBSTITUTIONS ARE MADE IN *.TST TESTS IN THE -- -- ACVC TEST SUITE. THIS PROCEDURE IS CURRENTLY SET UP FOR ACVC -- -- VERSION 1.10. -- -- -- ------------------------------------------------------------------------ PROCEDURE LOOK_FOR_MACRO (A_LINE : IN STRING; A_LENGTH : IN INTEGER; PTR : IN OUT INTEGER; MACRO : OUT STRING; MACRO_LEN : IN OUT INTEGER); PROCEDURE WHICH_MACRO (MACRO : IN STRING; MACRO_LEN : IN INTEGER; TEMP_MACRO : OUT STRING; TEMP_MACRO_LEN : IN OUT INTEGER); END PARSEMAC; PACKAGE BODY PARSEMAC IS ----------------------------------------------------------------------- -- PROCEDURE LOOK_FOR_MACRO LOOKS FOR A DOLLAR SIGN WHICH SIGNALS -- -- THE START OF A MACRO IN THE *.TST FILES. IT THEN COUNTS -- -- CHARACTERS UNTIL A <LETTER>, <NUMBER>, OR <_> IS NOT FOUND. -- -- RETURN PARAMETERS SEND THE BEGINNING POINTER AND LENGTH OF THE -- -- MACRO BACK TO THE MAIN PROGRAM. ALSO RETURNED IS THE MACRO -- -- STRING. -- ----------------------------------------------------------------------- PROCEDURE LOOK_FOR_MACRO (A_LINE : IN STRING; A_LENGTH : IN INTEGER; PTR : IN OUT INTEGER; MACRO : OUT STRING; MACRO_LEN : IN OUT INTEGER) IS II, J : INTEGER := INTEGER'LAST; BEGIN FOR I IN PTR..A_LENGTH LOOP IF A_LINE (I) = '$' THEN II := I+1; EXIT; END IF; II := I; END LOOP; IF II < A_LENGTH THEN -- DOLLAR SIGN IS FOUND. J := II; WHILE J <= A_LENGTH AND THEN ((A_LINE(J) IN 'A'..'Z') OR (A_LINE(J) IN '0'..'9') OR A_LINE(J) = '_') LOOP J := J+1; END LOOP; J := J-1; MACRO_LEN := (J-II+1); MACRO (1..MACRO_LEN) := A_LINE (II .. J); -- DON'T INCLUDE THE DOLLAR SIGN PTR := J+1; ELSE MACRO_LEN := 0; END IF; RETURN; END LOOK_FOR_MACRO; ------------------------------------------------------------------------ -- PROCEDURE WHICH_MACRO COMPARES THE INPUT MACRO STRING TO A -- -- VALUE READ FROM MACRO.DFS AND STORED IN THE SYMBOL TABLE AND -- -- RETURNS THE MACRO SUBSTITUTION STRING BACK TO THE MAIN PROGRAM. -- ------------------------------------------------------------------------ PROCEDURE WHICH_MACRO (MACRO : IN STRING; MACRO_LEN : IN INTEGER; TEMP_MACRO : OUT STRING; TEMP_MACRO_LEN : IN OUT INTEGER) IS BEGIN FOR INDEX IN 1 .. NUM_MACROS LOOP IF MACRO (1..MACRO_LEN) = SYMBOL_TABLE (INDEX).MACRO_NAME (1..SYMBOL_TABLE (INDEX).NAME_LENGTH) THEN TEMP_MACRO_LEN := SYMBOL_TABLE (INDEX).VALUE_LENGTH; TEMP_MACRO (1..TEMP_MACRO_LEN) := SYMBOL_TABLE (INDEX).MACRO_VALUE (1..TEMP_MACRO_LEN); EXIT; END IF; IF INDEX = NUM_MACROS THEN PUT_LINE ("** ERROR: MACRO " & MACRO (1..MACRO_LEN) & " NOT FOUND. UPDATE PROGRAM."); TEMP_MACRO_LEN := MACRO_LEN; TEMP_MACRO (1..TEMP_MACRO_LEN) := MACRO (1..MACRO_LEN); END IF; END LOOP; END WHICH_MACRO; BEGIN NULL; END PARSEMAC; WITH TEXT_IO, GETSUBS, PARSEMAC, DEFS; USE TEXT_IO, GETSUBS, PARSEMAC, DEFS; PROCEDURE MACROSUB IS ------------------------------------------------------------------------ -- -- -- MACROSUB IS THE MAIN PROGRAM THAT CALLS PROCEDURES IN TWO -- -- PACKAGES, GETSUBS AND PARSEMAC. THIS PROGRAM IS USED TO MAKE -- -- THE MACRO SUBSTITUTIONS FOR TST TESTS IN THE ACVC TEST SUITE. -- -- -- ------------------------------------------------------------------------ INFILE1, INFILE2, OUTFILE1 : FILE_TYPE; FNAME, MACRO : VAL_STRING; LENGTH, A_LENGTH, PTR, TEMP_MACRO_LENGTH, MACRO_LEN, FILE_COUNT : INTEGER := 0; A_LINE, TEMP_MACRO, TEMP_LINE, NEW_LINE : VAL_STRING; END_OF_LINE_SEARCH, FLAG : BOOLEAN := FALSE; TESTS_FILE : CONSTANT STRING := "TSTTESTS.DAT"; TSTTESTS,FILE_CRE : EXCEPTION; BEGIN PUT_LINE ("BEGINNING MACRO SUBSTITUTIONS."); FILL_TABLE; BEGIN OPEN (INFILE2, IN_FILE, TESTS_FILE); EXCEPTION WHEN NAME_ERROR => PUT_LINE ("** ERROR: ERROR DURING OPENING OF " & "TSTTESTS.DAT"); RAISE TSTTESTS; END; WHILE NOT END_OF_FILE (INFILE2) LOOP GET_LINE (INFILE2, FNAME, LENGTH); FILE_COUNT := FILE_COUNT + 1; BEGIN OPEN (INFILE1, IN_FILE, FNAME(1..LENGTH)); EXCEPTION WHEN NAME_ERROR => PUT_LINE ("** ERROR: ERROR DURING OPENING OF " & FNAME(1..LENGTH) & "."); FLAG := TRUE; END; IF NOT FLAG THEN PUT_LINE ("WORKING ON " & FNAME(1..LENGTH)); IF FILE_COUNT = 70 THEN PUT_LINE ("MACRO SUBSTITUTIONS HALF COMPLETED."); END IF; FOR I IN REVERSE 1 .. LENGTH LOOP IF FNAME(I) = ';' THEN LENGTH := I - 1; EXIT; END IF; END LOOP; IF FNAME (LENGTH-2..LENGTH) = "TST" THEN FNAME (LENGTH-2..LENGTH) := "ADT"; ELSIF FNAME (LENGTH-2..LENGTH) = "tst" THEN FNAME (LENGTH-2..LENGTH) := "adt"; END IF; BEGIN CREATE (OUTFILE1, OUT_FILE, FNAME (1..LENGTH)); EXCEPTION WHEN OTHERS => PUT_LINE ("** ERROR: EXCEPTION RAISED DURING" & " ATTEMPTED CREATION OF " & FNAME(1..LENGTH) & "."); RAISE FILE_CRE; END; WHILE NOT END_OF_FILE (INFILE1) LOOP GET_LINE (INFILE1, A_LINE, A_LENGTH); IF A_LENGTH > 0 AND A_LINE(1..2) /= "--" THEN END_OF_LINE_SEARCH := FALSE; PTR := 1; WHILE NOT END_OF_LINE_SEARCH LOOP LOOK_FOR_MACRO (A_LINE, A_LENGTH, PTR, MACRO, MACRO_LEN); IF MACRO_LEN = 0 THEN END_OF_LINE_SEARCH := TRUE; ELSE -- SEE WHICH MACRO IT IS WHICH_MACRO (MACRO, MACRO_LEN, TEMP_MACRO, TEMP_MACRO_LENGTH); END IF; IF NOT END_OF_LINE_SEARCH THEN IF PTR-MACRO_LEN-2 > 0 THEN -- IF MACRO IS NOT FIRST ON THE LINE NEW_LINE (1..PTR-MACRO_LEN-2) := A_LINE(1..PTR-MACRO_LEN -2); -- THE OLD LINE UNTIL THE DOLLAR SIGN END IF; NEW_LINE(PTR-MACRO_LEN-1 .. TEMP_MACRO_LENGTH + (PTR-MACRO_LEN) - 2) := TEMP_MACRO(1..TEMP_MACRO_LENGTH); IF PTR <= A_LENGTH THEN -- IF MACRO IS NOT LAST ON THE LINE NEW_LINE (TEMP_MACRO_LENGTH + PTR-MACRO_LEN - 1 .. TEMP_MACRO_LENGTH - 1 + A_LENGTH - MACRO_LEN) := A_LINE (PTR..A_LENGTH); ELSE END_OF_LINE_SEARCH := TRUE; END IF; A_LENGTH := A_LENGTH + TEMP_MACRO_LENGTH - MACRO_LEN - 1; A_LINE (1..A_LENGTH) := NEW_LINE (1..A_LENGTH); PTR := PTR - MACRO_LEN + TEMP_MACRO_LENGTH - 1; END IF; END LOOP; END IF; PUT_LINE (OUTFILE1, A_LINE (1..A_LENGTH)); END LOOP; CLOSE (OUTFILE1); CLOSE (INFILE1); ELSE FLAG := FALSE; END IF; END LOOP; CLOSE (INFILE2); PUT_LINE ("MACRO SUBSTITUTIONS COMPLETED."); EXCEPTION WHEN MAC_FILE | LINE_LEN | TSTTESTS | FILE_CRE => NULL; WHEN OTHERS => PUT_LINE ("UNEXPECTED EXCEPTION RAISED"); END MACROSUB;