OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [testsuite/] [lib/] [lto.exp] - Rev 708

Go to most recent revision | Compare with Previous | Blame | View Log

# Copyright (C) 2009, 2010 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GCC; see the file COPYING3.  If not see
# <http://www.gnu.org/licenses/>.

# Contributed by Diego Novillo <dnovillo@google.com>

# Prune messages that aren't useful.

proc lto_prune_warns { text } {

    verbose "lto_prune_warns: entry: $text" 2

    # Many tests that use visibility will still pass on platforms that don't support it.
    regsub -all "(^|\n)\[^\n\]*: warning: visibility attribute not supported in this configuration; ignored\[^\n\]*" $text "" text

    # Allow mixed-language LTO tests to pass with make check-c++0x
    regsub -all "(^|\n)\[^\n\]*: warning: command line option '-std=\[^\n\]*" $text "" text

    # And any stray location lines.
    regsub -all "(^|\n)\[^\n\]*: In function \[^\n\]*" $text "" text
    regsub -all "(^|\n)In file included from \[^\n\]*" $text "" text
    regsub -all "(^|\n)\[ \t\]*from \[^\n\]*" $text "" text

    # Sun ld warns about common symbols with differing sizes.  Unlike GNU ld
    # --warn-common (off by default), they cannot be disabled.
    regsub -all "(^|\n)ld: warning: symbol \[`'\]\[^\n\]*' has differing sizes:" $text "" text
    regsub -all "(^|\n)\[ \t\]*\[\(\]file \[^\n\]* value=\[^\n\]*; file \[^\n\]* value=\[^\n\]*\[)\];" $text "" text
    regsub -all "(^|\n)\[ \t\]*\[^\n\]* definition taken" $text "" text

    verbose "lto_prune_warns: exit: $text" 2

    return $text
}

# lto_init -- called at the start of each subdir of tests

proc lto_init { args } {
    global LTO_OPTIONS

    if {[info exists args] && $args == "no-mathlib"} {
        global board_info
        global saved_mathlib

        set dest [target_info name]
        if [board_info $dest exists mathlib] {
            set saved_mathlib [board_info $dest mathlib]
        }
        set board_info($dest,mathlib) " "
    }

    # Each test is run with the compiler options from this list.
    # The default option lists can be overridden by LTO_OPTIONS="[list
    # {opts_1} {opts_2}... {opts_n}]" where opts_i are lists of options.
    # You can put this in the environment before site.exp is written or
    # add it to site.exp directly.
    if ![info exists LTO_OPTIONS] {
        if [check_linker_plugin_available] {
          set LTO_OPTIONS [list \
              {-O0 -flto -flto-partition=none -fuse-linker-plugin} \
              {-O2 -flto -flto-partition=none -fuse-linker-plugin -fno-fat-lto-objects } \
              {-O0 -flto -flto-partition=1to1 -fno-use-linker-plugin } \
              {-O2 -flto -flto-partition=1to1 -fno-use-linker-plugin } \
              {-O0 -flto -fuse-linker-plugin -fno-fat-lto-objects }     \
              {-O2 -flto -fuse-linker-plugin}   \
          ]
        } else {
          set LTO_OPTIONS [list \
              {-O0 -flto -flto-partition=none } \
              {-O2 -flto -flto-partition=none } \
              {-O0 -flto -flto-partition=1to1 } \
              {-O2 -flto -flto-partition=1to1 } \
              {-O0 -flto }      \
              {-O2 -flto}               \
          ]
        }
    }
}

#
# lto_finish -- called at the end of each subdir of tests if mathlib is
#               changed.
#

proc lto_finish { } {
    global board_info
    global saved_mathlib

    set dest [target_info name]
    if [info exists saved_mathlib] {
        set board_info($dest,mathlib) $saved_mathlib
    } elseif [board_info $dest exists mathlib] {
        unset board_info($dest,mathlib)
    }
}

# Subsets of tests can be selectively disabled by members of this list:
#  - ATTRIBUTE: disable all tests using the __attribute__ extension,
#  - COMPLEX: disable all tests using the complex types feature,
#  - COMPLEX_INT: disable all tests using the complex integral types extension,
#  - VA: disable all tests using the variable number of arguments feature,
#  - VLA_IN_STRUCT: disable all tests using the variable-length arrays as
#    structure members extension,
#  - ZERO_ARRAY: disable all tests using the zero-sized arrays extension.
# The default skip lists can be overriden by
# LTO_SKIPS="[list {skip_1}...{skip_n}]"
# where skip_i are skip identifiers.  You can put this in the environment
# before site.exp is written or add it to site.exp directly.
if ![info exists LTO_SKIPS] {
    set LTO_SKIPS [list {}]
}

global lto_skip_list
set lto_skip_list $LTO_SKIPS

load_lib dg.exp
load_lib gcc-dg.exp
load_lib gcc.exp

# lto-obj -- compile to an object file
#
# SOURCE is the source file
# DEST is the object file
# OPTALL is the list of compiler options to use with all tests
# OPTFILE is the list of compiler options to use with this file
# OPTSTR is the options to print with test messages
# XFAILDATA is the xfail data to be passed to the compiler
proc lto-obj { source dest optall optfile optstr xfaildata } {
    global testcase
    global tool
    global compiler_conditional_xfail_data
    global lto_skip_list

    # Add the skip specifiers.
    foreach skip $lto_skip_list {
        if { ![string match $skip ""] } {
            lappend optall "-DSKIP_$skip"
        }
    }

    # Set up the options for compiling this file.
    set options ""
    lappend options "additional_flags=$optall $optfile"

    set compiler_conditional_xfail_data $xfaildata

    # Allow C source files to mix freely with other languages
    if [ string match "*.c" $source ] then {
      set comp_output [gcc_target_compile "$source" "$dest" object $options]
    } else {
      set comp_output [${tool}_target_compile "$source" "$dest" object $options]
    }
    # Prune unimportant visibility warnings before checking output.
    set comp_output [lto_prune_warns $comp_output]
    ${tool}_check_compile "$testcase $dest assemble" $optstr $dest $comp_output
}

# lto-link-and-maybe-run -- link the object files and run the executable
# if compile_type is set to "run"
#
# TESTNAME is the mixture of object files to link
# OBJLIST is the list of object files to link
# DEST is the name of the executable
# OPTALL is a list of compiler and linker options to use for all tests
# OPTFILE is a list of compiler and linker options to use for this test
# OPTSTR is the list of options to list in messages
proc lto-link-and-maybe-run { testname objlist dest optall optfile optstr } {
    global testcase
    global tool
    global compile_type
    global board_info

    # Check that all of the objects were built successfully.
    foreach obj [split $objlist] {
        if ![file_on_host exists $obj] then {
            unresolved "$testcase $testname link $optstr"
            unresolved "$testcase $testname execute $optstr"
            return
        }
    }

    # Set up the options for linking this test.
    set options ""
    lappend options "additional_flags=$optall $optfile"

    set target_board [target_info name]
    set relocatable 0

    # Some LTO tests do relocatable linking. Some target boards set
    # a linker script which can't be used for relocatable linking.
    # Use the default linker script instead.
    if { [lsearch -exact [split "$optall $optfile"] "-r"] >= 0 } {
        set relocatable 1
    }

    if { $relocatable } {
        set saved_ldscript [board_info $target_board ldscript]
        set board_info($target_board,ldscript) ""
    }

    # Link the objects into an executable.
    set comp_output [${tool}_target_compile "$objlist" $dest executable \
                     "$options"]

    if { $relocatable } {
        set board_info($target_board,ldscript) $saved_ldscript
    }

    # Prune unimportant visibility warnings before checking output.
    set comp_output [lto_prune_warns $comp_output]

    if ![${tool}_check_compile "$testcase $testname link" $optstr \
         $dest $comp_output] then {
        unresolved "$testcase $testname execute $optstr"
        return
    }

    # Return if we only needed to link.
    if { ![string compare "link" $compile_type] } {
        return
    }

    # Run the self-checking executable.
    if ![string match "*/*" $dest] then {
        set dest "./$dest"
    }
    set result [${tool}_load $dest "" ""]
    set status [lindex $result 0]
    if { $status == "pass" } then {
        file_on_host delete $dest
    }
    $status "$testcase $testname execute $optstr"
}

# lto-get-options-main -- get target requirements for a test and
# options for the primary source file and the test as a whole
#
# SRC is the full pathname of the primary source file.
proc lto-get-options-main { src } {
    global compile_type
    global dg-extra-ld-options
    global dg-suppress-ld-options

    set dg-extra-ld-options ""
    set dg-suppress-ld-options ""

    # dg-options sets a variable called dg-extra-tool-flags.
    set dg-extra-tool-flags ""

    # dg-options sets a variable called tool_flags.
    set tool_flags ""

    # dg-require-* sets dg-do-what.
    upvar dg-do-what dg-do-what 
    upvar dg-final-code dg-final-code
    set dg-final-code ""

    set tmp [dg-get-options $src]
    verbose "getting options for $src: $tmp"
    foreach op $tmp {
        set cmd [lindex $op 0]
        verbose "cmd is $cmd"
        if { [string match "dg-skip-if" $cmd] \
             || [string match "dg-require-*" $cmd] } {
            set status [catch "$op" errmsg]
            if { $status != 0 } {
                perror "src: $errmsg for \"$op\"\n"
                unresolved "$src: $errmsg for \"$op\""
                return
            }
        } elseif { [string match "dg-lto-options" $cmd] } {
            set op [lreplace $op 0 0 "dg-options"]
            set status [catch "$op" errmsg]
            if { $status != 0 } {
                perror "src: $errmsg for \"$op\"\n"
                unresolved "$src: $errmsg for \"$op\""
                return
            }
        } elseif { ![string compare "dg-xfail-if" $cmd] \
                   || ![string compare "dg-options" $cmd] } {
            warning "lto.exp does not support $cmd in primary source file"
        } elseif { ![string compare "dg-lto-do" $cmd] } {
            if { [llength $op] > 3 } {
                set kw [lindex [lindex $op 3] 0]
                if [string match "target" $kw] {
                    perror "$src: dg-lto-do does not support \"target\""
                } elseif [string match "xfail" $kw] {
                    perror "$src: dg-lto-do does not support \"xfail\""
                } else {
                    perror "$src: dg-lto-do takes a single argument"
                }
            }
            set dgdo [lindex $op 2]
            verbose "dg-lto-do command for \"$op\" is $dgdo"
            if { ![string compare "assemble" $dgdo] } {
                set compile_type "assemble"
            } elseif { ![string compare "run" $dgdo] } {
                set compile_type "run"
            } elseif { ![string compare "link" $dgdo] } {
                set compile_type "link"
            } else {
                warning "lto.exp does not support dg-lto-do $dgdo"
            }
        } elseif { ![string compare "dg-extra-ld-options" $cmd] } {
            if { [llength $op] > 4 } {
                error "[lindex $op 0]: too many arguments"
            } else {
                if { [llength $op] == 3
                     || ([llength $op] > 3
                         && [dg-process-target [lindex $op 3]] == "S") } {
                    set dg-extra-ld-options [lindex $op 2]
                    verbose \
                        "dg-extra-ld-options for main is ${dg-extra-ld-options}"
                }
            }
        } elseif { ![string compare "dg-suppress-ld-options" $cmd] } {
            if { [llength $op] > 4 } {
                error "[lindex $op 0]: too many arguments"
            } else {
                if { [llength $op] == 3
                     || ([llength $op] > 3
                         && [dg-process-target [lindex $op 3]] == "S") } {
                    set dg-suppress-ld-options [lindex $op 2]
                    verbose \
                        "dg-suppress-ld-options for main is ${dg-suppress-ld-options}"
                }
            }
        } elseif { ![string compare "dg-final" $cmd] } {
            if { [llength $op] > 3 } {
                error "[lindex $op 0]: too many arguments"
            } else {
                append dg-final-code "[lindex $op 2]\n"
            }
        } else {
            # Ignore unrecognized dg- commands, but warn about them.
            warning "lto.exp does not support $cmd"
        }
    }

    # Return flags to use for compiling the primary source file and for
    # linking.
    verbose "dg-extra-tool-flags for main is ${dg-extra-tool-flags}"
    return ${dg-extra-tool-flags}
}


# lto-get-options -- get special tool flags to use for a secondary
# source file
#
# SRC is the full pathname of the source file.
# The result is a list of options to use.
#
# This code is copied from proc dg-test in dg.exp from DejaGNU.
proc lto-get-options { src } {
    # dg-options sets a variable called dg-extra-tool-flags.
    set dg-extra-tool-flags ""

    # dg-xfail-if sets compiler_conditional_xfail_data.
    global compiler_conditional_xfail_data
    set compiler_conditional_xfail_data ""

    # dg-xfail-if needs access to dg-do-what.
    upvar dg-do-what dg-do-what 

    set tmp [dg-get-options $src]
    foreach op $tmp {
        set cmd [lindex $op 0]
        if { ![string compare "dg-options" $cmd] \
             || ![string compare "dg-xfail-if" $cmd] } {
            set status [catch "$op" errmsg]
            if { $status != 0 } {
                perror "src: $errmsg for \"$op\"\n"
                unresolved "$src: $errmsg for \"$op\""
                return
            }
        } elseif { [string match "dg-require-*" $cmd] } {
            warning "lto.exp does not support $cmd in secondary source files"
        } else {
            # Ignore unrecognized dg- commands, but warn about them.
            warning "lto.exp does not support $cmd in secondary source files"
        }
    }

    return ${dg-extra-tool-flags}
}

# lto-execute -- compile multi-file tests
#
# SRC1 is the full pathname of the main file of the testcase.
# SID identifies a test suite in the names of temporary files.
proc lto-execute { src1 sid } {
    global srcdir tmpdir
    global lto_option_list
    global tool
    global verbose
    global testcase
    global gluefile
    global compiler_conditional_xfail_data
    global dg-do-what-default
    global compile_type
    global dg-extra-ld-options
    global dg-suppress-ld-options
    global LTO_OPTIONS
    global dg-final-code

    # Get extra flags for this test from the primary source file, and
    # process other dg-* options that this suite supports.  Warn about
    # unsupported flags.
    verbose "lto-execute: $src1" 1
    set compile_type "run"
    set dg-do-what [list ${dg-do-what-default} "" P]
    set extra_flags(0) [lto-get-options-main $src1]
    set compile_xfail(0) "" 

    # If the main file defines dg-options, those flags are used to
    # overwrite the default lto_option_list taken from LTO_OPTIONS.
    if { [string length $extra_flags(0)] > 0 } {
        set lto_option_list $extra_flags(0)
        set extra_flags(0) ""
    } else {
        set lto_option_list $LTO_OPTIONS
    }

    # Set up the names of the other source files.
    set dir [file dirname $src1]
    set base [file rootname $src1]
    set base [string range $base [string length $dir] end]
    regsub "_0" $base "" base
    regsub "/" $base "" base
    set src_list $src1
    set i 1
    set done 0
    while { !$done } {
        set names [glob -nocomplain -types f -- "${dir}/${base}_${i}.*"]
        if { [llength ${names}] > 1 } {
            warning "lto-execute: more than one file matched ${dir}/${base}_${i}.*"
        }
        if { [llength ${names}] == 1 } {
            lappend src_list [lindex ${names} 0]
            incr i
        } else {
            set num_srcs ${i}
            set done 1
        }
    }

    # Use the dg-options mechanism to specify extra flags for each
    # of the secondary files.
    # The extra flags in each file are used to compile that file, and the
    # extra flags in *_0.* are also used for linking.
    verbose "\tsrc_list is: $src_list"
    for {set i 1} {$i < $num_srcs} {incr i} {
        set extra_flags($i) [lto-get-options [lindex $src_list $i]]
        set compile_xfail($i) $compiler_conditional_xfail_data
    }

    # Define the names of the object files.
    set obj_list ""
    for {set i 0} {$i < $num_srcs} {incr i} {
        lappend obj_list "${sid}_${base}_${i}.o"
    }

    # Get the base name of this test, for use in messages.
    set testcase [lindex ${src_list} 0]

    # Remove the $srcdir and $tmpdir prefixes from $src1.  (It would
    # be possible to use "regsub" here, if we were careful to escape
    # all regular expression characters in $srcdir and $tmpdir, but
    # that would be more complicated that this approach.) 
    if {[string first "$srcdir/" "${testcase}"] == 0} {
        set testcase [string range "${testcase}" [string length "$srcdir/"] end]
    }
    if {[string first "$tmpdir/" "$testcase"] == 0} {
        set testcase [string range "$testcase" [string length "$tmpdir/"] end]
        set testcase "tmpdir-$testcase"
    }
    # If we couldn't rip $srcdir out of `src1' then just do the best we can.
    # The point is to reduce the unnecessary noise in the logs.  Don't strip
    # out too much because different testcases with the same name can confuse
    # `test-tool'.
    if [string match "/*" $testcase] then {
        set testcase "[file tail [file dirname $src1]]/[file tail $src1]"
    }

    # Check whether this test is supported for this target.
    if { [lindex ${dg-do-what} 1 ] == "N" } {
        unsupported "$testcase"
        verbose "$testcase not supported on this target, skipping it" 3
        return
    }

    regsub "_0.*" $testcase "" testcase

    # Set up the base name of executable files so they'll be unique.
    regsub -all "\[./\]" $testcase "-" execbase

    # Loop through all of the option lists used for this test.
    set count 0
    foreach option $lto_option_list {
        verbose "Testing $testcase, $option"

        # There's a unique name for each executable we generate.
        set execname "${execbase}-${count}1.exe"
        incr count

        file_on_host delete $execname

        # Compile pieces with the compiler under test.
        set i 0
        foreach src $src_list obj $obj_list {
            lto-obj $src $obj $option $extra_flags($i) $option \
                    $compile_xfail($i)
            incr i
        }

        # Link (using the compiler under test), run, and clean up tests.
        if { ![string compare "run" $compile_type] \
             || ![string compare "link" $compile_type] } {

            # Filter out any link options we were asked to suppress.
            set reduced {}
            foreach x [split $option] {
              if {[lsearch ${dg-suppress-ld-options} $x] == -1} {
                lappend reduced $x
              }
            }
            set filtered [join $reduced " "]

            lto-link-and-maybe-run \
                    "[lindex $obj_list 0]-[lindex $obj_list end]" \
                    $obj_list $execname $filtered ${dg-extra-ld-options} \
                    $filtered
        }


        # Are there any further tests to perform?
        # Note that if the program has special run-time requirements, running
        # of the program can be delayed until here.  Ditto for other situations.
        # It would be a bit cumbersome though.

        if ![string match ${dg-final-code} ""] {
            regsub -all "\\\\(\[{}\])" ${dg-final-code} "\\1" dg-final-code
            # Note that the use of `args' here makes this a varargs proc.
            proc dg-final-proc { args } ${dg-final-code}
            verbose "Running dg-final tests." 3
            verbose "dg-final-proc:\n[info body dg-final-proc]" 4
            if [catch "dg-final-proc $src1" errmsg] {
                perror "$name: error executing dg-final: $errmsg"
                # ??? The call to unresolved here is necessary to clear
                # `errcnt'.  What we really need is a proc like perror that
                # doesn't set errcnt.  It should also set exit_status to 1.
                unresolved "$name: error executing dg-final: $errmsg"
            }
        }

        # Clean up object files.
        set files [glob -nocomplain ${sid}_*.o]
        if { $files != "" } {
            foreach objfile $files {
                if { ![info exists gluefile] || $objfile != $gluefile } {
                    eval "file_on_host delete $objfile"
                }
            }
        }

        if { ![string compare "run" $compile_type] \
             || ![string compare "link" $compile_type] } {
            file_on_host delete $execname
        }
    }
}

# Utility for scanning a symbol in the final executable, invoked via dg-final.
# Call pass if pattern is present, otherwise fail.
#
# Argument 0 is the regexp to match.
# Argument 1 handles expected failures and the like
proc scan-symbol { args } {
    global nm
    global base_dir
    upvar 2 execname execname

    if { [llength $args] >= 2 } {
        switch [dg-process-target [lindex $args 1]] {
            "S" { }
            "N" { return }
            "F" { setup_xfail "*-*-*" }
            "P" { }
        }
    }

    # Find nm like we find g++ in g++.exp.
    if ![info exists nm]  {
        set nm [findfile $base_dir/../../../binutils/nm \
                $base_dir/../../../binutils/nm \
                [findfile $base_dir/../../nm $base_dir/../../nm \
                      [findfile $base_dir/nm $base_dir/nm \
                       [transform nm]]]]
        verbose -log "nm is $nm"
    }

    set output_file "[glob -nocomplain $execname]"
    if { $output_file == "" } {
        fail "scan-symbol $args: dump file does not exist"
        return
    }

    set fd [open "| $nm $output_file" r]
    set text [read $fd]
    close $fd

    if [regexp -- [lindex $args 0] $text] {
        pass "scan-symbol $args"
    } else {
        fail "scan-symbol $args"
    }
}

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.