URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [libffi/] [configure.ac] - Rev 745
Go to most recent revision | Compare with Previous | Blame | View Log
dnl Process this with autoconf to create configure
AC_PREREQ(2.64)
AC_INIT([libffi], [3.0.9], [http://gcc.gnu.org/bugs.html])
AC_CONFIG_HEADERS([fficonfig.h])
AM_ENABLE_MULTILIB(, ..)
AC_CANONICAL_SYSTEM
target_alias=${target_alias-$host_alias}
. ${srcdir}/configure.host
AM_INIT_AUTOMAKE
# The same as in boehm-gc and libstdc++. Have to borrow it from there.
# We must force CC to /not/ be precious variables; otherwise
# the wrong, non-multilib-adjusted value will be used in multilibs.
# As a side effect, we have to subst CFLAGS ourselves.
m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
m4_define([_AC_ARG_VAR_PRECIOUS],[])
AC_PROG_CC
m4_rename_force([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
AC_SUBST(CFLAGS)
AM_PROG_AS
AM_PROG_CC_C_O
AC_PROG_LIBTOOL
AM_MAINTAINER_MODE
AC_CHECK_HEADERS(sys/mman.h)
AC_CHECK_FUNCS(mmap)
AC_FUNC_MMAP_BLACKLIST
dnl The -no-testsuite modules omit the test subdir.
AM_CONDITIONAL(TESTSUBDIR, test -d $srcdir/testsuite)
TARGETDIR="unknown"
case "$host" in
alpha*-*-*)
TARGET=ALPHA; TARGETDIR=alpha;
# Support 128-bit long double, changeable via command-line switch.
HAVE_LONG_DOUBLE='defined(__LONG_DOUBLE_128__)'
;;
arm*-*-*)
TARGET=ARM; TARGETDIR=arm
;;
amd64-*-freebsd* | amd64-*-openbsd*)
TARGET=X86_64; TARGETDIR=x86
;;
avr32*-*-*)
TARGET=AVR32; TARGETDIR=avr32
;;
cris-*-*)
TARGET=LIBFFI_CRIS; TARGETDIR=cris
;;
frv-*-*)
TARGET=FRV; TARGETDIR=frv
;;
hppa*-*-linux* | parisc*-*-linux*)
TARGET=PA_LINUX; TARGETDIR=pa
;;
hppa*64-*-hpux*)
TARGET=PA64_HPUX; TARGETDIR=pa
;;
hppa*-*-hpux*)
TARGET=PA_HPUX; TARGETDIR=pa
;;
i?86-*-freebsd* | i?86-*-openbsd*)
TARGET=X86_FREEBSD; TARGETDIR=x86
;;
i?86-win32* | i?86-*-cygwin* | i?86-*-mingw* | i?86-*-os2*)
TARGET=X86_WIN32; TARGETDIR=x86
# All mingw/cygwin/win32 builds require -no-undefined for sharedlib.
# We must also check with_cross_host to decide if this is a native
# or cross-build and select where to install dlls appropriately.
if test -n "$with_cross_host" &&
test x"$with_cross_host" != x"no"; then
AM_LTLDFLAGS='-no-undefined -bindir "$(toolexeclibdir)"';
else
AM_LTLDFLAGS='-no-undefined -bindir "$(bindir)"';
fi
;;
i?86-*-darwin*)
TARGET=X86_DARWIN; TARGETDIR=x86
;;
i?86-*-solaris2.1[[0-9]]*)
TARGET=X86_64; TARGETDIR=x86
;;
i?86-*-*)
TARGET=X86_64; TARGETDIR=x86
;;
ia64*-*-*)
TARGET=IA64; TARGETDIR=ia64
;;
m32r*-*-*)
TARGET=M32R; TARGETDIR=m32r
;;
m68k-*-*)
TARGET=M68K; TARGETDIR=m68k
;;
mips-sgi-irix5.* | mips-sgi-irix6.* | mips*-*-rtems*)
TARGET=MIPS; TARGETDIR=mips
;;
mips*-*-linux*)
# Support 128-bit long double for NewABI.
HAVE_LONG_DOUBLE='defined(__mips64)'
TARGET=MIPS; TARGETDIR=mips
;;
powerpc*-*-linux* | powerpc-*-sysv*)
TARGET=POWERPC; TARGETDIR=powerpc
;;
powerpc-*-beos*)
TARGET=POWERPC; TARGETDIR=powerpc
;;
powerpc-*-darwin*)
TARGET=POWERPC_DARWIN; TARGETDIR=powerpc
;;
powerpc-*-aix* | rs6000-*-aix*)
TARGET=POWERPC_AIX; TARGETDIR=powerpc
;;
powerpc-*-freebsd*)
TARGET=POWERPC_FREEBSD; TARGETDIR=powerpc
;;
powerpc64-*-freebsd*)
TARGET=POWERPC; TARGETDIR=powerpc
;;
powerpc*-*-rtems*)
TARGET=POWERPC; TARGETDIR=powerpc
;;
s390-*-* | s390x-*-*)
TARGET=S390; TARGETDIR=s390
;;
sh-*-* | sh[[34]]*-*-*)
TARGET=SH; TARGETDIR=sh
;;
sh64-*-* | sh5*-*-*)
TARGET=SH64; TARGETDIR=sh64
;;
sparc*-*-*)
TARGET=SPARC; TARGETDIR=sparc
;;
x86_64-*-darwin*)
TARGET=X86_DARWIN; TARGETDIR=x86
;;
x86_64-*-cygwin* | x86_64-*-mingw*)
TARGET=X86_WIN64; TARGETDIR=x86
# All mingw/cygwin/win32 builds require -no-undefined for sharedlib.
# We must also check with_cross_host to decide if this is a native
# or cross-build and select where to install dlls appropriately.
if test -n "$with_cross_host" &&
test x"$with_cross_host" != x"no"; then
AM_LTLDFLAGS='-no-undefined -bindir "$(toolexeclibdir)"';
else
AM_LTLDFLAGS='-no-undefined -bindir "$(bindir)"';
fi
;;
x86_64-*-*)
TARGET=X86_64; TARGETDIR=x86
;;
esac
AC_SUBST(AM_RUNTESTFLAGS)
AC_SUBST(AM_LTLDFLAGS)
if test $TARGETDIR = unknown; then
AC_MSG_ERROR(["libffi has not been ported to $host."])
fi
AM_CONDITIONAL(MIPS, test x$TARGET = xMIPS)
AM_CONDITIONAL(SPARC, test x$TARGET = xSPARC)
AM_CONDITIONAL(X86, test x$TARGET = xX86)
AM_CONDITIONAL(X86_FREEBSD, test x$TARGET = xX86_FREEBSD)
AM_CONDITIONAL(X86_WIN32, test x$TARGET = xX86_WIN32)
AM_CONDITIONAL(X86_WIN64, test x$TARGET = xX86_WIN64)
AM_CONDITIONAL(X86_DARWIN, test x$TARGET = xX86_DARWIN)
AM_CONDITIONAL(ALPHA, test x$TARGET = xALPHA)
AM_CONDITIONAL(IA64, test x$TARGET = xIA64)
AM_CONDITIONAL(M32R, test x$TARGET = xM32R)
AM_CONDITIONAL(M68K, test x$TARGET = xM68K)
AM_CONDITIONAL(POWERPC, test x$TARGET = xPOWERPC)
AM_CONDITIONAL(POWERPC_AIX, test x$TARGET = xPOWERPC_AIX)
AM_CONDITIONAL(POWERPC_DARWIN, test x$TARGET = xPOWERPC_DARWIN)
AM_CONDITIONAL(POWERPC_FREEBSD, test x$TARGET = xPOWERPC_FREEBSD)
AM_CONDITIONAL(ARM, test x$TARGET = xARM)
AM_CONDITIONAL(AVR32, test x$TARGET = xAVR32)
AM_CONDITIONAL(LIBFFI_CRIS, test x$TARGET = xLIBFFI_CRIS)
AM_CONDITIONAL(FRV, test x$TARGET = xFRV)
AM_CONDITIONAL(S390, test x$TARGET = xS390)
AM_CONDITIONAL(X86_64, test x$TARGET = xX86_64)
AM_CONDITIONAL(SH, test x$TARGET = xSH)
AM_CONDITIONAL(SH64, test x$TARGET = xSH64)
AM_CONDITIONAL(PA_LINUX, test x$TARGET = xPA_LINUX)
AM_CONDITIONAL(PA_HPUX, test x$TARGET = xPA_HPUX)
AM_CONDITIONAL(PA64_HPUX, test x$TARGET = xPA64_HPUX)
AC_HEADER_STDC
AC_CHECK_FUNCS(memcpy)
AC_FUNC_ALLOCA
AC_CHECK_SIZEOF(double)
AC_CHECK_SIZEOF(long double)
# Also AC_SUBST this variable for ffi.h.
if test -z "$HAVE_LONG_DOUBLE"; then
HAVE_LONG_DOUBLE=0
if test $ac_cv_sizeof_double != $ac_cv_sizeof_long_double; then
if test $ac_cv_sizeof_long_double != 0; then
HAVE_LONG_DOUBLE=1
AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if you have the long double type and it is bigger than a double])
fi
fi
fi
AC_SUBST(HAVE_LONG_DOUBLE)
AC_C_BIGENDIAN
GCC_AS_CFI_PSEUDO_OP
if test x$TARGET = xSPARC; then
AC_CACHE_CHECK([assembler and linker support unaligned pc related relocs],
libffi_cv_as_sparc_ua_pcrel, [
save_CFLAGS="$CFLAGS"
save_LDFLAGS="$LDFLAGS"
CFLAGS="$CFLAGS -fpic"
LDFLAGS="$LDFLAGS -shared"
AC_TRY_LINK([asm (".text; foo: nop; .data; .align 4; .byte 0; .uaword %r_disp32(foo); .text");],,
[libffi_cv_as_sparc_ua_pcrel=yes],
[libffi_cv_as_sparc_ua_pcrel=no])
CFLAGS="$save_CFLAGS"
LDFLAGS="$save_LDFLAGS"])
if test "x$libffi_cv_as_sparc_ua_pcrel" = xyes; then
AC_DEFINE(HAVE_AS_SPARC_UA_PCREL, 1,
[Define if your assembler and linker support unaligned PC relative relocs.])
fi
AC_CACHE_CHECK([assembler .register pseudo-op support],
libffi_cv_as_register_pseudo_op, [
libffi_cv_as_register_pseudo_op=unknown
# Check if we have .register
AC_TRY_COMPILE([asm (".register %g2, #scratch");],,
[libffi_cv_as_register_pseudo_op=yes],
[libffi_cv_as_register_pseudo_op=no])
])
if test "x$libffi_cv_as_register_pseudo_op" = xyes; then
AC_DEFINE(HAVE_AS_REGISTER_PSEUDO_OP, 1,
[Define if your assembler supports .register.])
fi
fi
if test x$TARGET = xX86 || test x$TARGET = xX86_WIN32 || test x$TARGET = xX86_64; then
AC_CACHE_CHECK([assembler supports pc related relocs],
libffi_cv_as_x86_pcrel, [
libffi_cv_as_x86_pcrel=yes
echo '.text; foo: nop; .data; .long foo-.; .text' > conftest.s
if $CC $CFLAGS -c conftest.s 2>&1 | $EGREP -i 'illegal|warning' > /dev/null; then
libffi_cv_as_x86_pcrel=no
fi
])
if test "x$libffi_cv_as_x86_pcrel" = xyes; then
AC_DEFINE(HAVE_AS_X86_PCREL, 1,
[Define if your assembler supports PC relative relocs.])
fi
AC_CACHE_CHECK([assembler .ascii pseudo-op support],
libffi_cv_as_ascii_pseudo_op, [
libffi_cv_as_ascii_pseudo_op=unknown
# Check if we have .ascii
AC_TRY_COMPILE([asm (".ascii \\"string\\"");],,
[libffi_cv_as_ascii_pseudo_op=yes],
[libffi_cv_as_ascii_pseudo_op=no])
])
if test "x$libffi_cv_as_ascii_pseudo_op" = xyes; then
AC_DEFINE(HAVE_AS_ASCII_PSEUDO_OP, 1,
[Define if your assembler supports .ascii.])
fi
AC_CACHE_CHECK([assembler .string pseudo-op support],
libffi_cv_as_string_pseudo_op, [
libffi_cv_as_string_pseudo_op=unknown
# Check if we have .string
AC_TRY_COMPILE([asm (".string \\"string\\"");],,
[libffi_cv_as_string_pseudo_op=yes],
[libffi_cv_as_string_pseudo_op=no])
])
if test "x$libffi_cv_as_string_pseudo_op" = xyes; then
AC_DEFINE(HAVE_AS_STRING_PSEUDO_OP, 1,
[Define if your assembler supports .string.])
fi
fi
case "$target" in
*-apple-darwin10* | *-*-freebsd* | *-*-openbsd* | *-pc-solaris*)
AC_DEFINE(FFI_MMAP_EXEC_WRIT, 1,
[Cannot use malloc on this target, so, we revert to
alternative means])
;;
esac
if test x$TARGET = xX86_64; then
AC_CACHE_CHECK([assembler supports unwind section type],
libffi_cv_as_x86_64_unwind_section_type, [
libffi_cv_as_x86_64_unwind_section_type=yes
echo '.section .eh_frame,"a",@unwind' > conftest.s
if $CC $CFLAGS -c conftest.s 2>&1 | grep -i warning > /dev/null; then
libffi_cv_as_x86_64_unwind_section_type=no
fi
])
if test "x$libffi_cv_as_x86_64_unwind_section_type" = xyes; then
AC_DEFINE(HAVE_AS_X86_64_UNWIND_SECTION_TYPE, 1,
[Define if your assembler supports unwind section type.])
fi
fi
AC_CACHE_CHECK([whether .eh_frame section should be read-only],
libffi_cv_ro_eh_frame, [
libffi_cv_ro_eh_frame=no
echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
libffi_cv_ro_eh_frame=yes
elif grep '.section.*eh_frame.*#alloc' conftest.c \
| grep -v '#write' > /dev/null; then
libffi_cv_ro_eh_frame=yes
fi
fi
rm -f conftest.*
])
if test "x$libffi_cv_ro_eh_frame" = xyes; then
AC_DEFINE(HAVE_RO_EH_FRAME, 1,
[Define if .eh_frame sections should be read-only.])
AC_DEFINE(EH_FRAME_FLAGS, "a",
[Define to the flags needed for the .section .eh_frame directive.])
else
AC_DEFINE(EH_FRAME_FLAGS, "aw",
[Define to the flags needed for the .section .eh_frame directive.])
fi
AC_CACHE_CHECK([for __attribute__((visibility("hidden")))],
libffi_cv_hidden_visibility_attribute, [
echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1; }' > conftest.c
libffi_cv_hidden_visibility_attribute=no
if AC_TRY_COMMAND(${CC-cc} -Werror -S conftest.c -o conftest.s 1>&AS_MESSAGE_LOG_FD); then
if grep '\.hidden.*foo' conftest.s >/dev/null; then
libffi_cv_hidden_visibility_attribute=yes
fi
fi
rm -f conftest.*
])
if test $libffi_cv_hidden_visibility_attribute = yes; then
AC_DEFINE(HAVE_HIDDEN_VISIBILITY_ATTRIBUTE, 1,
[Define if __attribute__((visibility("hidden"))) is supported.])
fi
AH_BOTTOM([
#ifdef HAVE_HIDDEN_VISIBILITY_ATTRIBUTE
#ifdef LIBFFI_ASM
#define FFI_HIDDEN(name) .hidden name
#else
#define FFI_HIDDEN __attribute__ ((visibility ("hidden")))
#endif
#else
#ifdef LIBFFI_ASM
#define FFI_HIDDEN(name)
#else
#define FFI_HIDDEN
#endif
#endif
])
AC_SUBST(TARGET)
AC_SUBST(TARGETDIR)
AC_SUBST(SHELL)
AC_ARG_ENABLE(debug,
[ --enable-debug debugging mode],
if test "$enable_debug" = "yes"; then
AC_DEFINE(FFI_DEBUG, 1, [Define this if you want extra debugging.])
fi)
AC_ARG_ENABLE(structs,
[ --disable-structs omit code for struct support],
if test "$enable_structs" = "no"; then
AC_DEFINE(FFI_NO_STRUCTS, 1, [Define this is you do not want support for aggregate types.])
fi)
AC_ARG_ENABLE(raw-api,
[ --disable-raw-api make the raw api unavailable],
if test "$enable_raw_api" = "no"; then
AC_DEFINE(FFI_NO_RAW_API, 1, [Define this is you do not want support for the raw API.])
fi)
AC_ARG_ENABLE(purify-safety,
[ --enable-purify-safety purify-safe mode],
if test "$enable_purify_safety" = "yes"; then
AC_DEFINE(USING_PURIFY, 1, [Define this if you are using Purify and want to suppress spurious messages.])
fi)
if test -n "$with_cross_host" &&
test x"$with_cross_host" != x"no"; then
toolexecdir='$(exec_prefix)/$(target_alias)'
toolexeclibdir='$(toolexecdir)/lib'
else
toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
toolexeclibdir='$(libdir)'
fi
multi_os_directory=`$CC -print-multi-os-directory`
case $multi_os_directory in
.) ;; # Avoid trailing /.
*) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
esac
AC_SUBST(toolexecdir)
AC_SUBST(toolexeclibdir)
if test "${multilib}" = "yes"; then
multilib_arg="--enable-multilib"
else
multilib_arg=
fi
AC_CONFIG_COMMANDS(include, [test -d include || mkdir include])
AC_CONFIG_COMMANDS(src, [
test -d src || mkdir src
test -d src/$TARGETDIR || mkdir src/$TARGETDIR
], [TARGETDIR="$TARGETDIR"])
AC_CONFIG_LINKS(include/ffitarget.h:src/$TARGETDIR/ffitarget.h)
AC_CONFIG_FILES(include/Makefile include/ffi.h Makefile testsuite/Makefile man/Makefile)
AC_OUTPUT
Go to most recent revision | Compare with Previous | Blame | View Log