Subversion Repositories openrisc

/* LineNumberReader.java -- A character input stream which counts line numbers
   Copyright (C) 1998, 1999, 2001, 2003, 2005  Free Software Foundation, Inc.
 
This file is part of GNU Classpath.
 
GNU Classpath is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
 
GNU Classpath is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with GNU Classpath; see the file COPYING.  If not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301 USA.
 
Linking this library statically or dynamically with other modules is
making a combined work based on this library.  Thus, the terms and
conditions of the GNU General Public License cover the whole
combination.
 
As a special exception, the copyright holders of this library give you
permission to link this library with independent modules to produce an
executable, regardless of the license terms of these independent
modules, and to copy and distribute the resulting executable under
terms of your choice, provided that you also meet, for each linked
independent module, the terms and conditions of the license of that
module.  An independent module is a module which is not derived from
or based on this library.  If you modify this library, you may extend
this exception to your version of the library, but you are not
obligated to do so.  If you do not wish to do so, delete this
exception statement from your version. */
 
package java.io;
 
/**
 * This class functions like a standard <code>Reader</code> except that it
 * counts line numbers, and canonicalizes newline characters.  As data
 * is read, whenever the char sequences "\r", "\n", or "\r\n" are encountered,
 * the running line count is incremeted by one.  Additionally, the whatever
 * line termination sequence was encountered will be converted to a "\n"
 * char.  Note that this class numbers lines from 0.  When the first
 * line terminator is encountered, the line number is incremented to 1, and
 * so on.  Also note that actual "\r" and "\n" characters are looked for.
 * The system dependent line separator sequence is ignored.
 * <p>
 * This class counts only line termination characters.  If the last line
 * read from the stream does not end in a line termination sequence, it
 * will not be counted as a line.
 *
 * @author Per Bothner (bothner@cygnus.com)
 * @author Aaron M. Renn (arenn@urbanophile.com)
 * @author Guilhem Lavaux (guilhem@kaffe.org)
 * @date December 28, 2003.
 */
/* Written using "Java Class Libraries", 2nd edition, plus online
 * API docs for JDK 1.2 beta from http://www.javasoft.com.
 * Status:  Believed complete and correct.
 *
 * This implementation has the feature that if '\r' is read, it
 * does not look for a '\n', but immediately returns '\n'.
 * On the next read(), if a '\n' is read, it is skipped.
 * This has the advantage that we do not read (and hang) unnecessarily.
 *
 * This implementation is also minimal in the number of fields it uses.
 */
public class LineNumberReader extends BufferedReader
{
  /** The current line number. */
  private int lineNumber;
  /** Whether we already found a new line in the former call. */
  private boolean matchedNewLine;
  /** The saved line number when calling mark() */
  private int savedLineNumber;
 
  /**
    * Create a new <code>LineNumberReader</code> that reads from the
    * specified subordinate <code>Reader</code>.  A default 8K char sized
    * buffer will be used for reads.
    *
    * @param in The subordinate <code>Reader</code> to read from
    */
  public LineNumberReader(Reader in)
  {
    super(in, DEFAULT_BUFFER_SIZE);
  }
 
  /**
    * This method initializes a new <code>LineNumberReader</code> to read
    * from the specified subordinate <code>Reader</code> using the specified
    * read buffer size.
    *
    * @param in The subordinate <code>Reader</code> to read from
    * @param size The buffer size to use for reading
    */
  public LineNumberReader(Reader in, int size)
  {
    super(in, size);
  }
 
  /**
    * This method returns the current line number
    *
    * @return The current line number
    */
  public int getLineNumber()
  {
    return lineNumber;
  }
 
  /**
    * This method sets the current line number to the specified value.
    *
    * @param lineNumber The new line number
    */
  public void setLineNumber(int lineNumber)
  {
    this.lineNumber = lineNumber;
  }
 
  /**
    * This method marks a position in the input to which the stream can be
    * "reset" char calling the <code>reset()</code> method.  The parameter
    * <code>readlimit</code> is the number of chars that can be read from the
    * stream after setting the mark before the mark becomes invalid.   For
    * example, if <code>mark()</code> is called with a read limit of 10,
    * then when
    * 11 chars of data are read from the stream before the <code>reset()</code>
    * method is called, then the mark is invalid and the stream object
    * instance is not required to remember the mark.
    * <p>
    * In this class, this method will remember the current line number as well
    * as the current position in the stream.  When the <code>reset()</code>
    * method
    * is called, the line number will be restored to the saved line number in
    * addition to the stream position.
    *
    * @param readLimit The number of chars that can be read before the
    * mark becomes invalid
    *
    * @exception IOException If an error occurs
    */
  public void mark(int readLimit) throws IOException
  {
    if (readLimit < 0)
      throw new IllegalArgumentException("Read-ahead limit is negative");
 
    synchronized (lock)
      {
        // This is basically the same as BufferedReader.mark.
        // However, if the previous character was a '\r', we need to
        // save that 'r', in case the next character is a '\n'.
        if (pos + readLimit > limit)
          {
            int saveCR = matchedNewLine ? 1 : 0;
            char[] old_buffer = buffer;
            if (readLimit > limit)
              buffer = new char[saveCR + readLimit];
            int copy_start = pos - saveCR;
            savedLineNumber = lineNumber;
            limit -= copy_start;
            System.arraycopy(old_buffer, copy_start, buffer, 0, limit);
            pos = saveCR;
          }
        markPos = pos;
      }
  }
 
  /**
    * This method resets a stream to the point where the <code>mark()</code>
    * method
    * was called.  Any chars that were read after the mark point was set will
    * be re-read during subsequent reads.
    * <p>
    * In this class, this method will also restore the line number that was
    * current when the <code>mark()</code> method was called.
    *
    * @exception IOException If an error occurs
    */
  public void reset() throws IOException
  {
    synchronized (lock)
      {
        if (markPos < 0)
          throw new IOException("mark never set or invalidated");
        lineNumber = savedLineNumber;
        pos = markPos;
        matchedNewLine = (markPos > 0 && buffer[markPos-1] == '\r');
      }
  }
 
  /**
   * This private method fills the input buffer whatever pos is.
   * Consequently pos should be checked before calling this method.
   *
   * @return the number of bytes actually read from the input stream or
   * -1 if end of stream.
   * @exception IOException If an error occurs.
   */
  private int fill() throws IOException
  {
    if (markPos >= 0 && limit == buffer.length)
      markPos = -1;
    if (markPos < 0)
      pos = limit = 0;
    int count = in.read(buffer, limit, buffer.length - limit);
    if (count <= 0)
      return -1;
    limit += count;
 
    return count;
  }
 
  /**
    * This method reads an unsigned char from the input stream and returns it
    * as an int in the range of 0-65535.  This method will return -1 if the
    * end of the stream has been reached.
    * <p>
    * Note that if a line termination sequence is encountered (ie, "\r",
    * "\n", or "\r\n") then that line termination sequence is converted to
    * a single "\n" value which is returned from this method.  This means
    * that it is possible this method reads two chars from the subordinate
    * stream instead of just one.
    * <p>
    * Note that this method will block until a char of data is available
    * to be read.
    *
    * @return The char read or -1 if end of stream
    *
    * @exception IOException If an error occurs
    */
  public int read() throws IOException
  {
    synchronized (lock)
      {
        skipRedundantLF();
        if (pos >= limit && fill() < 0)
          return -1;
        char ch = buffer[pos++];
 
        if ((matchedNewLine = (ch == '\r')) || ch == '\n')
          {
            lineNumber++;
            return '\n';
          }
        matchedNewLine = false;
        return (int) ch;
      }
  }
 
  /**
    * This method reads chars from a stream and stores them into a caller
    * supplied buffer.  It starts storing data at index <code>offset</code> into
    * the buffer and attemps to read <code>len</code> chars.  This method can
    * return before reading the number of chars requested.  The actual number
    * of chars read is returned as an int.  A -1 is returned to indicated the
    * end of the stream.
    * <p>
    * This method will block until some data can be read.
    * <p>
    * Note that if a line termination sequence is encountered (ie, "\r",
    * "\n", or "\r\n") then that line termination sequence is converted to
    * a single "\n" value which is stored in the buffer.  Only a single
    * char is counted towards the number of chars read in this case.
    *
    * @param buf The array into which the chars read should be stored
    * @param offset The offset into the array to start storing chars
    * @param count The requested number of chars to read
    *
    * @return The actual number of chars read, or -1 if end of stream
    *
    * @exception IOException If an error occurs.
    * @exception NullPointerException If buf is null (in any case).
    * @exception IndexOutOfBoundsException If buffer parameters (offset and
    * count) lies outside of the buffer capacity.
    */
  public int read(char[] buf, int offset, int count) throws IOException
  {
    if (buf == null)
      throw new NullPointerException();
 
    if (offset + count > buf.length || offset < 0)
      throw new IndexOutOfBoundsException();
 
    if (count <= 0)
      {
        if (count < 0)
          throw new IndexOutOfBoundsException();
        return 0;
      }
 
    synchronized (lock)
      {
        if (pos >= limit && fill() < 0)
          return -1;
 
        int start_offset = offset;
        boolean matched = matchedNewLine;
 
        while (count-- > 0 && pos < limit)
          {
            char ch = buffer[pos++];
            if (ch == '\r')
              {
                lineNumber++;
                matched = true;
              }
            else if (ch == '\n' && !matched)
              lineNumber++;
            else
              matched = false;
 
            buf[offset++] = ch;
          }
 
        matchedNewLine = matched;
        return offset - start_offset;
      }
  }
 
  private void skipRedundantLF() throws IOException
  {
    if (pos > 0 && matchedNewLine)
      {
        if (pos < limit)
          { // fast case
            if (buffer[pos] == '\n')
              pos++;
          }
        else
          { // check whether the next buffer begins with '\n'.
            // in that case kill the '\n'.
            if (fill() <= 0)
              return;
            if (buffer[pos] == '\n')
              pos++;
          }
        matchedNewLine = true;
      }
  }
 
  /**
    * This method reads a line of text from the input stream and returns
    * it as a <code>String</code>.  A line is considered to be terminated
    * by a "\r", "\n", or "\r\n" sequence, not by the system dependent line
    * separator.
    *
    * @return The line read as a <code>String</code> or <code>null</code>
    * if end of stream.
    *
    * @exception IOException If an error occurs
    */
  public String readLine() throws IOException
  {
    // BufferedReader.readLine already does this.  Shouldn't need to keep
    // track of newlines (since the read method deals with this for us).
    // But if the buffer is large, we may not call the read method at all
    // and super.readLine can't increment lineNumber itself.
    // Though it may seem kludgy, the safest thing to do is to save off
    // lineNumber and increment it explicitly when we're done (iff we
    // ended with a '\n' or '\r' as opposed to EOF).
    //
    // Also, we need to undo the special casing done by BufferedReader.readLine
    // when a '\r' is the last char in the buffer.  That situation is marked
    // by 'pos > limit'.
    int tmpLineNumber = lineNumber;
    skipRedundantLF();
    String str = super.readLine();
    if (pos > limit)
      --pos;
 
    // The only case where you mustn't increment the line number is you are
    // at the EOS.
    if (str != null)
      lineNumber = tmpLineNumber + 1;
 
    return str;
  }
 
  /**
    * This method skips over characters in the stream.  This method will
    * skip the specified number of characters if possible, but is not required
    * to skip them all.  The actual number of characters skipped is returned.
    * This method returns 0 if the specified number of chars is less than 1.
    *
    * @param count The specified number of chars to skip.
    *
    * @return The actual number of chars skipped.
    *
    * @exception IOException If an error occurs
    */
  public long skip (long count) throws IOException
  {
    if (count < 0)
      throw new IllegalArgumentException("skip() value is negative");
    if (count == 0)
      return 0;
 
    int skipped;
    char[] buf = new char[1];
 
    for (skipped = 0; skipped < count; skipped++)
      {
        int ch = read(buf, 0, 1);
 
        if (ch < 0)
          break;
      }
 
    return skipped;
  }
}