Subversion Repositories openrisc

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = native
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../../config/depstand.m4 \
        $(top_srcdir)/../../config/lead-dot.m4 \
        $(top_srcdir)/../../config/lib-ld.m4 \
        $(top_srcdir)/../../config/lib-link.m4 \
        $(top_srcdir)/../../config/lib-prefix.m4 \
        $(top_srcdir)/../../config/multi.m4 \
        $(top_srcdir)/../../config/no-executables.m4 \
        $(top_srcdir)/../../config/override.m4 \
        $(top_srcdir)/../../libtool.m4 \
        $(top_srcdir)/../../ltoptions.m4 \
        $(top_srcdir)/../../ltsugar.m4 \
        $(top_srcdir)/../../ltversion.m4 \
        $(top_srcdir)/../../lt~obsolete.m4 \
        $(top_srcdir)/m4/ac_prog_antlr.m4 \
        $(top_srcdir)/m4/ac_prog_java.m4 \
        $(top_srcdir)/m4/ac_prog_java_works.m4 \
        $(top_srcdir)/m4/ac_prog_javac.m4 \
        $(top_srcdir)/m4/ac_prog_javac_works.m4 \
        $(top_srcdir)/m4/acattribute.m4 $(top_srcdir)/m4/accross.m4 \
        $(top_srcdir)/m4/acinclude.m4 \
        $(top_srcdir)/m4/ax_create_stdint_h.m4 \
        $(top_srcdir)/m4/ax_func_which_gethostbyname_r.m4 \
        $(top_srcdir)/m4/gcc_attribute.m4 $(top_srcdir)/m4/iconv.m4 \
        $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
        html-recursive info-recursive install-data-recursive \
        install-dvi-recursive install-exec-recursive \
        install-html-recursive install-info-recursive \
        install-pdf-recursive install-ps-recursive install-recursive \
        installcheck-recursive installdirs-recursive pdf-recursive \
        ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
        distdir
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
ANTLR = @ANTLR@
ANTLR_JAR = @ANTLR_JAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CAIRO_CFLAGS = @CAIRO_CFLAGS@
CAIRO_LIBS = @CAIRO_LIBS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CLASSPATH_CONVENIENCE = @CLASSPATH_CONVENIENCE@
CLASSPATH_INCLUDES = @CLASSPATH_INCLUDES@
CLASSPATH_MODULE = @CLASSPATH_MODULE@
COLLECTIONS_PREFIX = @COLLECTIONS_PREFIX@
CP = @CP@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATE = @DATE@
DEFAULT_PREFS_PEER = @DEFAULT_PREFS_PEER@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ECJ_JAR = @ECJ_JAR@
EGREP = @EGREP@
ERROR_CFLAGS = @ERROR_CFLAGS@
EXAMPLESDIR = @EXAMPLESDIR@
EXEEXT = @EXEEXT@
EXTRA_CFLAGS = @EXTRA_CFLAGS@
FGREP = @FGREP@
FIND = @FIND@
FREETYPE2_CFLAGS = @FREETYPE2_CFLAGS@
FREETYPE2_LIBS = @FREETYPE2_LIBS@
GCONF_CFLAGS = @GCONF_CFLAGS@
GCONF_LIBS = @GCONF_LIBS@
GDK_CFLAGS = @GDK_CFLAGS@
GDK_LIBS = @GDK_LIBS@
GJDOC = @GJDOC@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_LIBS = @GLIB_LIBS@
GMP_CFLAGS = @GMP_CFLAGS@
GMP_LIBS = @GMP_LIBS@
GREP = @GREP@
GSTREAMER_BASE_CFLAGS = @GSTREAMER_BASE_CFLAGS@
GSTREAMER_BASE_LIBS = @GSTREAMER_BASE_LIBS@
GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@
GSTREAMER_FILE_READER = @GSTREAMER_FILE_READER@
GSTREAMER_LIBS = @GSTREAMER_LIBS@
GSTREAMER_MIXER_PROVIDER = @GSTREAMER_MIXER_PROVIDER@
GSTREAMER_PLUGINS_BASE_CFLAGS = @GSTREAMER_PLUGINS_BASE_CFLAGS@
GSTREAMER_PLUGINS_BASE_LIBS = @GSTREAMER_PLUGINS_BASE_LIBS@
GST_PLUGIN_LDFLAGS = @GST_PLUGIN_LDFLAGS@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_LIBS = @GTK_LIBS@
INIT_LOAD_LIBRARY = @INIT_LOAD_LIBRARY@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
JAR = @JAR@
JAVA = @JAVA@
JAVAC = @JAVAC@
JAVAC_IS_GCJ = @JAVAC_IS_GCJ@
JAVAC_MEM_OPT = @JAVAC_MEM_OPT@
JAVA_LANG_SYSTEM_EXPLICIT_INITIALIZATION = @JAVA_LANG_SYSTEM_EXPLICIT_INITIALIZATION@
JAY = @JAY@
JAY_SKELETON = @JAY_SKELETON@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBDEBUG = @LIBDEBUG@
LIBICONV = @LIBICONV@
LIBMAGIC = @LIBMAGIC@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBVERSION = @LIBVERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR = @MKDIR@
MKDIR_P = @MKDIR_P@
MOC = @MOC@
MOZILLA_CFLAGS = @MOZILLA_CFLAGS@
MOZILLA_LIBS = @MOZILLA_LIBS@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PANGOFT2_CFLAGS = @PANGOFT2_CFLAGS@
PANGOFT2_LIBS = @PANGOFT2_LIBS@
PATH_SEPARATOR = @PATH_SEPARATOR@
PATH_TO_ESCHER = @PATH_TO_ESCHER@
PATH_TO_GLIBJ_ZIP = @PATH_TO_GLIBJ_ZIP@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
PLUGIN_DIR = @PLUGIN_DIR@
QT_CFLAGS = @QT_CFLAGS@
QT_LIBS = @QT_LIBS@
RANLIB = @RANLIB@
REMOVE = @REMOVE@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRICT_WARNING_CFLAGS = @STRICT_WARNING_CFLAGS@
STRIP = @STRIP@
TOOLSDIR = @TOOLSDIR@
USER_JAVAH = @USER_JAVAH@
VERSION = @VERSION@
WANT_NATIVE_BIG_INTEGER = @WANT_NATIVE_BIG_INTEGER@
WARNING_CFLAGS = @WARNING_CFLAGS@
XMKMF = @XMKMF@
XML_CFLAGS = @XML_CFLAGS@
XML_LIBS = @XML_LIBS@
XSLT_CFLAGS = @XSLT_CFLAGS@
XSLT_LIBS = @XSLT_LIBS@
XTEST_LIBS = @XTEST_LIBS@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
ZIP = @ZIP@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_ANTLR = @ac_ct_ANTLR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
default_toolkit = @default_toolkit@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
glibjdir = @glibjdir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
nativeexeclibdir = @nativeexeclibdir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
toolexeclibdir = @toolexeclibdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
uudecode = @uudecode@
vm_classes = @vm_classes@
@CREATE_JNI_LIBRARIES_TRUE@JNIDIR = jni
@CREATE_GTK_PEER_LIBRARIES_TRUE@JAWTDIR = jawt
@CREATE_PLUGIN_TRUE@PLUGINDIR = plugin
SUBDIRS = fdlibm $(JNIDIR) $(JAWTDIR) $(PLUGINDIR)
DIST_SUBDIRS = fdlibm jni jawt plugin
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
                && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu native/Makefile'; \
        $(am__cd) $(top_srcdir) && \
          $(AUTOMAKE) --gnu native/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        @case '$?' in \
          *config.status*) \
            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
          *) \
            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
        -rm -f *.lo

clean-libtool:
        -rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
        @fail= failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            dot_seen=yes; \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done; \
        if test "$$dot_seen" = "no"; then \
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
        @fail= failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        case "$@" in \
          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
          *) list='$(SUBDIRS)' ;; \
        esac; \
        rev=''; for subdir in $$list; do \
          if test "$$subdir" = "."; then :; else \
            rev="$$subdir $$rev"; \
          fi; \
        done; \
        rev="$$rev ."; \
        target=`echo $@ | sed s/-recursive//`; \
        for subdir in $$rev; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done && test -z "$$fail"
tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        done
ctags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
        done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        set x; \
        here=`pwd`; \
        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
          include_option=--etags-include; \
          empty_fix=.; \
        else \
          include_option=--include; \
          empty_fix=; \
        fi; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test ! -f $$subdir/TAGS || \
              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
          fi; \
        done; \
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        shift; \
        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
          test -n "$$unique" || unique=$$empty_fix; \
          if test $$# -gt 0; then \
            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
              "$$@" $$unique; \
          else \
            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
              $$unique; \
          fi; \
        fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        test -z "$(CTAGS_ARGS)$$unique" \
          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
             $$unique

GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
          && $(am__cd) $(top_srcdir) \
          && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
        list='$(DISTFILES)'; \
          dist_files=`for file in $$list; do echo $$file; done | \
          sed -e "s|^$$srcdirstrip/||;t" \
              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
        case $$dist_files in \
          */*) $(MKDIR_P) `echo "$$dist_files" | \
                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                           sort -u` ;; \
        esac; \
        for file in $$dist_files; do \
          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
          if test -d $$d/$$file; then \
            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
            if test -d "$(distdir)/$$file"; then \
              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
            fi; \
            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
            fi; \
            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
          else \
            test -f "$(distdir)/$$file" \
            || cp -p $$d/$$file "$(distdir)/$$file" \
            || exit 1; \
          fi; \
        done
        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
            || $(MKDIR_P) "$(distdir)/$$subdir" \
            || exit 1; \
          fi; \
        done
        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
            $(am__relativize); \
            new_distdir=$$reldir; \
            dir1=$$subdir; dir2="$(top_distdir)"; \
            $(am__relativize); \
            new_top_distdir=$$reldir; \
            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
            ($(am__cd) $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
                top_distdir="$$new_top_distdir" \
                distdir="$$new_distdir" \
                am__remove_distdir=: \
                am__skip_length_check=: \
                am__skip_mode_fix=: \
                distdir) \
              || exit 1; \
          fi; \
        done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
        -rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
        -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
        install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
        all all-am check check-am clean clean-generic clean-libtool \
        ctags ctags-recursive distclean distclean-generic \
        distclean-libtool distclean-tags distdir dvi dvi-am html \
        html-am info info-am install install-am install-data \
        install-data-am install-dvi install-dvi-am install-exec \
        install-exec-am install-html install-html-am install-info \
        install-info-am install-man install-pdf install-pdf-am \
        install-ps install-ps-am install-strip installcheck \
        installcheck-am installdirs installdirs-am maintainer-clean \
        maintainer-clean-generic mostlyclean mostlyclean-generic \
        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
        uninstall uninstall-am


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: