OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [libstdc++-v3/] [src/] [Makefile.in] - Rev 742

Compare with Previous | Blame | View Log

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(top_srcdir)/fragment.am $(srcdir)/Makefile.in \
        $(srcdir)/Makefile.am
subdir = src
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
        $(top_srcdir)/../config/enable.m4 \
        $(top_srcdir)/../config/futex.m4 \
        $(top_srcdir)/../config/iconv.m4 \
        $(top_srcdir)/../config/lead-dot.m4 \
        $(top_srcdir)/../config/lib-ld.m4 \
        $(top_srcdir)/../config/lib-link.m4 \
        $(top_srcdir)/../config/lib-prefix.m4 \
        $(top_srcdir)/../config/lthostflags.m4 \
        $(top_srcdir)/../config/multi.m4 \
        $(top_srcdir)/../config/no-executables.m4 \
        $(top_srcdir)/../config/override.m4 \
        $(top_srcdir)/../config/stdint.m4 \
        $(top_srcdir)/../config/unwind_ipinfo.m4 \
        $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
        $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
        $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
        $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
        $(top_srcdir)/../config/gc++filt.m4 \
        $(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(toolexeclibdir)"
LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
am__DEPENDENCIES_1 =
am_libstdc___la_OBJECTS =
libstdc___la_OBJECTS = $(am_libstdc___la_OBJECTS)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
        --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
        $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
        --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
        $(LDFLAGS) -o $@
SOURCES = $(libstdc___la_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
        html-recursive info-recursive install-data-recursive \
        install-dvi-recursive install-exec-recursive \
        install-html-recursive install-info-recursive \
        install-pdf-recursive install-ps-recursive install-recursive \
        installcheck-recursive installdirs-recursive pdf-recursive \
        ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
ACLOCAL = @ACLOCAL@
ALLOCATOR_H = @ALLOCATOR_H@
ALLOCATOR_NAME = @ALLOCATOR_NAME@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
ATOMIC_FLAGS = @ATOMIC_FLAGS@
ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASIC_FILE_CC = @BASIC_FILE_CC@
BASIC_FILE_H = @BASIC_FILE_H@
CC = @CC@
CCODECVT_CC = @CCODECVT_CC@
CCOLLATE_CC = @CCOLLATE_CC@
CCTYPE_CC = @CCTYPE_CC@
CFLAGS = @CFLAGS@
CLOCALE_CC = @CLOCALE_CC@
CLOCALE_H = @CLOCALE_H@
CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
CMESSAGES_CC = @CMESSAGES_CC@
CMESSAGES_H = @CMESSAGES_H@
CMONEY_CC = @CMONEY_CC@
CNUMERIC_CC = @CNUMERIC_CC@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
CSTDIO_H = @CSTDIO_H@
CTIME_CC = @CTIME_CC@
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFILT = @CXXFILT@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
DBLATEX = @DBLATEX@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
DOT = @DOT@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@
EXEEXT = @EXEEXT@
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
FGREP = @FGREP@
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
GLIBCXX_LIBS = @GLIBCXX_LIBS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
OPT_LDFLAGS = @OPT_LDFLAGS@
OS_INC_SRCDIR = @OS_INC_SRCDIR@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PDFLATEX = @PDFLATEX@
PIC_CXXFLAGS = @PIC_CXXFLAGS@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
SYMVER_FILE = @SYMVER_FILE@
TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
XMLLINT = @XMLLINT@
XSLTPROC = @XSLTPROC@
XSL_STYLE_DIR = @XSL_STYLE_DIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
baseline_subdir_switch = @baseline_subdir_switch@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
check_msgfmt = @check_msgfmt@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
glibcxx_MOFILES = @glibcxx_MOFILES@
glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
glibcxx_POFILES = @glibcxx_POFILES@
glibcxx_builddir = @glibcxx_builddir@
glibcxx_localedir = @glibcxx_localedir@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
lt_host_flags = @lt_host_flags@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
port_specific_symbol_files = @port_specific_symbol_files@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
python_mod_dir = @python_mod_dir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
toplevel_builddir = @toplevel_builddir@
toplevel_srcdir = @toplevel_srcdir@

# May be used by various substitution variables.
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
MAINT_CHARSET = latin1
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
PWD_COMMAND = $${PWDCMD-pwd}
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)
@ENABLE_WERROR_FALSE@WERROR_FLAG = 
@ENABLE_WERROR_TRUE@WERROR_FLAG = $(WERROR)

# These bits are all figured out from configure.  Look in acinclude.m4
# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
        $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS) -frandom-seed=$@

WARN_CXXFLAGS = \
        $(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once 


# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
SUBDIRS = c++98 c++11

# Cross compiler support.
toolexeclib_LTLIBRARIES = libstdc++.la
libstdc___la_SOURCES = 
libstdc___la_LIBADD = \
        $(GLIBCXX_LIBS) \
        $(top_builddir)/libsupc++/libsupc++convenience.la \
        $(top_builddir)/src/c++98/libc++98convenience.la \
        $(top_builddir)/src/c++11/libc++11convenience.la

libstdc___la_DEPENDENCIES = \
        ${version_dep} \
        $(top_builddir)/libsupc++/libsupc++convenience.la \
        $(top_builddir)/src/c++98/libc++98convenience.la \
        $(top_builddir)/src/c++11/libc++11convenience.la

libstdc___la_LDFLAGS = \
        -version-info $(libtool_VERSION) ${version_arg} -lm

libstdc___la_LINK = $(CXXLINK) $(libstdc___la_LDFLAGS)

# AM_CXXFLAGS needs to be in each subdirectory so that it can be
# modified in a per-library or per-sub-library way.  Need to manually
# set this option because CONFIG_CXXFLAGS has to be after
# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden
# as the occasion calls for it.
AM_CXXFLAGS = \
        $(XTEMPLATE_FLAGS) \
        $(WARN_CXXFLAGS) \
        $(OPTIMIZE_CXXFLAGS) \
        $(CONFIG_CXXFLAGS)


# libstdc++ libtool notes

# 1) Need to explicitly set LTCXXCOMPILE so that AM_CXXFLAGS is
# last. (That way, things like -O2 passed down from the toplevel can
# be overridden by --enable-debug.)

# 2) In general, libtool expects an argument such as `--tag=CXX' when
# using the C++ compiler, because that will enable the settings
# detected when C++ support was being configured.  However, when no
# such flag is given in the command line, libtool attempts to figure
# it out by matching the compiler name in each configuration section
# against a prefix of the command line.  The problem is that, if the
# compiler name and its initial flags stored in the libtool
# configuration file don't match those in the command line, libtool
# can't decide which configuration to use, and it gives up.  The
# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe
# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to
# attempt to infer which configuration to use
LTCXXCOMPILE = $(LIBTOOL) --tag CXX \
               $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile \
               $(CXX) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
               $(AM_CXXFLAGS) $(CXXFLAGS)

LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS))

# 3) We'd have a problem when building the shared libstdc++ object if
# the rules automake generates would be used.  We cannot allow g++ to
# be used since this would add -lstdc++ to the link line which of
# course is problematic at this point.  So, we get the top-level
# directory to configure libstdc++-v3 to use gcc as the C++
# compilation driver.
CXXLINK = $(LIBTOOL) --tag CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link \
          $(CXX) $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@

@ENABLE_SYMVERS_TRUE@CLEANFILES = libstdc++-symbols.ver $(version_dep)
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,-exported_symbols_list,libstdc++-symbols.explist
@ENABLE_SYMVERS_FALSE@version_arg = 
@ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,-M,libstdc++-symbols.ver-sun
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.explist
@ENABLE_SYMVERS_FALSE@version_dep = 
@ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver-sun
@GLIBCXX_BUILD_DEBUG_FALSE@STAMP_DEBUG = 

# Added rules.
# 1 debug library
# 2 supra-convenience library
@GLIBCXX_BUILD_DEBUG_TRUE@STAMP_DEBUG = build-debug
@GLIBCXX_BUILD_DEBUG_FALSE@STAMP_INSTALL_DEBUG = 
@GLIBCXX_BUILD_DEBUG_TRUE@STAMP_INSTALL_DEBUG = install-debug
@GLIBCXX_BUILD_DEBUG_FALSE@CLEAN_DEBUG = 
@GLIBCXX_BUILD_DEBUG_TRUE@CLEAN_DEBUG = debug

# Build a debug variant.
# Take care to fix all possibly-relative paths.
debugdir = ${glibcxx_builddir}/src/debug
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
                && { if test -f $@; then exit 0; else break; fi; }; \
              exit 1;; \
          esac; \
        done; \
        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps src/Makefile'; \
        $(am__cd) $(top_srcdir) && \
          $(AUTOMAKE) --foreign --ignore-deps src/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        @case '$?' in \
          *config.status*) \
            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
          *) \
            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
        @$(NORMAL_INSTALL)
        test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)"
        @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
        list2=; for p in $$list; do \
          if test -f $$p; then \
            list2="$$list2 $$p"; \
          else :; fi; \
        done; \
        test -z "$$list2" || { \
          echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
          $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
        }

uninstall-toolexeclibLTLIBRARIES:
        @$(NORMAL_UNINSTALL)
        @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
        for p in $$list; do \
          $(am__strip_dir) \
          echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
          $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
        done

clean-toolexeclibLTLIBRARIES:
        -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
        @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
          dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
          test "$$dir" != "$$p" || dir=.; \
          echo "rm -f \"$${dir}/so_locations\""; \
          rm -f "$${dir}/so_locations"; \
        done
libstdc++.la: $(libstdc___la_OBJECTS) $(libstdc___la_DEPENDENCIES) 
        $(libstdc___la_LINK) -rpath $(toolexeclibdir) $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) $(LIBS)

mostlyclean-compile:
        -rm -f *.$(OBJEXT)

distclean-compile:
        -rm -f *.tab.c

mostlyclean-libtool:
        -rm -f *.lo

clean-libtool:
        -rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
        @fail= failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            dot_seen=yes; \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done; \
        if test "$$dot_seen" = "no"; then \
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
        @fail= failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        case "$@" in \
          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
          *) list='$(SUBDIRS)' ;; \
        esac; \
        rev=''; for subdir in $$list; do \
          if test "$$subdir" = "."; then :; else \
            rev="$$subdir $$rev"; \
          fi; \
        done; \
        rev="$$rev ."; \
        target=`echo $@ | sed s/-recursive//`; \
        for subdir in $$rev; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done && test -z "$$fail"
tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        done
ctags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
        done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        set x; \
        here=`pwd`; \
        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
          include_option=--etags-include; \
          empty_fix=.; \
        else \
          include_option=--include; \
          empty_fix=; \
        fi; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test ! -f $$subdir/TAGS || \
              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
          fi; \
        done; \
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        shift; \
        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
          test -n "$$unique" || unique=$$empty_fix; \
          if test $$# -gt 0; then \
            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
              "$$@" $$unique; \
          else \
            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
              $$unique; \
          fi; \
        fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
              END { if (nonempty) { for (i in files) print i; }; }'`; \
        test -z "$(CTAGS_ARGS)$$unique" \
          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
             $$unique

GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
          && $(am__cd) $(top_srcdir) \
          && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am: all-am
check: check-recursive
all-am: Makefile $(LTLIBRARIES) all-local
installdirs: installdirs-recursive
installdirs-am:
        for dir in "$(DESTDIR)$(toolexeclibdir)"; do \
          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
        done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local \
        clean-toolexeclibLTLIBRARIES mostlyclean-am

distclean: distclean-recursive
        -rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
        distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-toolexeclibLTLIBRARIES

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
        -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
        mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-toolexeclibLTLIBRARIES

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
        install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
        all all-am all-local check check-am clean clean-generic \
        clean-libtool clean-local clean-toolexeclibLTLIBRARIES ctags \
        ctags-recursive distclean distclean-compile distclean-generic \
        distclean-libtool distclean-tags dvi dvi-am html html-am info \
        info-am install install-am install-data install-data-am \
        install-data-local install-dvi install-dvi-am install-exec \
        install-exec-am install-html install-html-am install-info \
        install-info-am install-man install-pdf install-pdf-am \
        install-ps install-ps-am install-strip \
        install-toolexeclibLTLIBRARIES installcheck installcheck-am \
        installdirs installdirs-am maintainer-clean \
        maintainer-clean-generic mostlyclean mostlyclean-compile \
        mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
        tags tags-recursive uninstall uninstall-am \
        uninstall-toolexeclibLTLIBRARIES


vpath % $(top_srcdir)/src
vpath % $(top_srcdir)

# Symbol versioning for shared libraries.
@ENABLE_SYMVERS_TRUE@libstdc++-symbols.ver:  ${glibcxx_srcdir}/$(SYMVER_FILE) \
@ENABLE_SYMVERS_TRUE@           $(port_specific_symbol_files)
@ENABLE_SYMVERS_TRUE@   cp ${glibcxx_srcdir}/$(SYMVER_FILE) $@.tmp
@ENABLE_SYMVERS_TRUE@   chmod +w $@.tmp
@ENABLE_SYMVERS_TRUE@   if test "x$(port_specific_symbol_files)" != x; then \
@ENABLE_SYMVERS_TRUE@     if grep '^# Appended to version file.' \
@ENABLE_SYMVERS_TRUE@          $(port_specific_symbol_files) /dev/null > /dev/null 2>&1; then \
@ENABLE_SYMVERS_TRUE@       cat $(port_specific_symbol_files) >> $@.tmp; \
@ENABLE_SYMVERS_TRUE@     else \
@ENABLE_SYMVERS_TRUE@       sed -n '1,/DO NOT DELETE/p' $@.tmp > tmp.top; \
@ENABLE_SYMVERS_TRUE@       sed -n '/DO NOT DELETE/,$$p' $@.tmp > tmp.bottom; \
@ENABLE_SYMVERS_TRUE@       cat tmp.top $(port_specific_symbol_files) tmp.bottom > $@.tmp; \
@ENABLE_SYMVERS_TRUE@       rm tmp.top tmp.bottom; \
@ENABLE_SYMVERS_TRUE@     fi; \
@ENABLE_SYMVERS_TRUE@   fi
@ENABLE_SYMVERS_TRUE@   $(EGREP) -v '^[         ]*#(#| |$$)' $@.tmp | \
@ENABLE_SYMVERS_TRUE@     $(COMPILE) -E -P -include config.h - > $@ || (rm -f $@ ; exit 1)
@ENABLE_SYMVERS_TRUE@   rm -f $@.tmp
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@libstdc++-symbols.ver-sun : libstdc++-symbols.ver \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@          $(toplevel_srcdir)/contrib/make_sunver.pl \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@          $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD)
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@  CXXFILT="$(CXXFILT)"; export CXXFILT; \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@  perl $(toplevel_srcdir)/contrib/make_sunver.pl \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@    libstdc++-symbols.ver \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@    $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@   `echo $(libstdc___la_LIBADD) | \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@      sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@   > $@ || (rm -f $@ ; exit 1)
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@libstdc++-symbols.explist : libstdc++-symbols.ver \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@               ${glibcxx_srcdir}/scripts/make_exports.pl \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@               $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD)
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@       perl ${glibcxx_srcdir}/scripts/make_exports.pl \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@         libstdc++-symbols.ver \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@         $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@        `echo $(libstdc___la_LIBADD) | \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@           sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@        > $@ || (rm -f $@ ; exit 1)

# Control additional build primary rules.
# EXTRA_LTLIBRARIES =
all-once: libstdc++convenience.la $(STAMP_DEBUG)
install-data-once: $(STAMP_INSTALL_DEBUG)

all-local: all-once
install-data-local: install-data-once
clean-local:
        rm -rf libstdc++convenience.la stamp* $(CLEAN_DEBUG)

# Make a non-installed convenience library, so that --disable-static
# may work.
libstdc++convenience.la: $(toolexeclib_LTLIBRARIES)
        $(CXXLINK) $(libstdc___la_LIBADD) $(LIBS); \
        if test ! -f .libs/libstdc++.a; then \
          cp .libs/libstdc++convenience.a .libs/libstdc++.a; \
        fi; \
        echo `date` > stamp-libstdc++convenience;
stamp-debug:
        if test ! -d ${debugdir}; then \
          mkdir -p ${debugdir}; \
          for d in $(SUBDIRS); do mkdir -p  ${debugdir}/$$d; done; \
          (cd ${debugdir}; \
          sed -e 's/top_builddir = \.\./top_builddir = ..\/../' \
              -e 's/top_build_prefix = \.\./top_build_prefix = ..\/../' \
              -e 's/srcdir = \.\./srcdir = ..\/../' \
              -e 's/VPATH = \.\./VPATH = ..\/../' \
              -e 's/glibcxx_basedir = \.\./glibcxx_basedir = ..\/../' \
              -e 's/MKDIR_P = \.\./MKDIR_P = ..\/../' \
          < ../Makefile > Makefile ; \
          for d in . $(SUBDIRS); do \
          sed -e 's/top_builddir = \.\./top_builddir = ..\/../' \
              -e 's/top_build_prefix = \.\./top_build_prefix = ..\/../' \
              -e 's/srcdir = \.\./srcdir = ..\/../' \
              -e 's/VPATH = \.\./VPATH = ..\/../' \
              -e 's/glibcxx_basedir = \.\./glibcxx_basedir = ..\/../' \
              -e 's/MKDIR_P = \.\./MKDIR_P = ..\/../' \
          < ../$$d/Makefile > $$d/Makefile ; \
          done) ; \
        fi; \
        echo `date` > stamp-debug;

build-debug: stamp-debug
          (cd ${debugdir}; \
          mv Makefile Makefile.tmp; \
          sed -e 's,all-local: all-once,all-local:,' \
              -e 's,install-data-local: install-data-once,install-data-local:,' \
              -e 's,src/c,src/debug/c,' \
          < Makefile.tmp > Makefile ; \
          $(MAKE) CXXFLAGS='$(DEBUG_FLAGS)' \
          toolexeclibdir=$(glibcxx_toolexeclibdir)/debug all) ;

# Install debug library.
install-debug: build-debug
        (cd ${debugdir} && $(MAKE) CXXFLAGS='$(DEBUG_FLAGS)' \
        toolexeclibdir=$(glibcxx_toolexeclibdir)/debug install) ;

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.