URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [zlib/] [contrib/] [masmx64/] [inffas8664.c] - Rev 848
Go to most recent revision | Compare with Previous | Blame | View Log
/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding * version for AMD64 on Windows using Microsoft C compiler * * Copyright (C) 1995-2003 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h * * Copyright (C) 2003 Chris Anderson <christop@charm.net> * Please use the copyright conditions above. * * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant * * inffas8664.c call function inffas8664fnc in inffasx64.asm * inffasx64.asm is automatically convert from AMD64 portion of inffas86.c * * Dec-29-2003 -- I added AMD64 inflate asm support. This version is also * slightly quicker on x86 systems because, instead of using rep movsb to copy * data, it uses rep movsw, which moves data in 2-byte chunks instead of single * bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates * from http://fedora.linux.duke.edu/fc1_x86_64 * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with * 1GB ram. The 64-bit version is about 4% faster than the 32-bit version, * when decompressing mozilla-source-1.3.tar.gz. * * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from * the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at * the moment. I have successfully compiled and tested this code with gcc2.96, * gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX * enabled. I will attempt to merge the MMX code into this version. Newer * versions of this and inffast.S can be found at * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/ * */ #include <stdio.h> #include "zutil.h" #include "inftrees.h" #include "inflate.h" #include "inffast.h" /* Mark Adler's comments from inffast.c: */ /* Decode literal, length, and distance codes and write out the resulting literal and match bytes until either not enough input or output is available, an end-of-block is encountered, or a data error is encountered. When large enough input and output buffers are supplied to inflate(), for example, a 16K input buffer and a 64K output buffer, more than 95% of the inflate execution time is spent in this routine. Entry assumptions: state->mode == LEN strm->avail_in >= 6 strm->avail_out >= 258 start >= strm->avail_out state->bits < 8 On return, state->mode is one of: LEN -- ran out of enough output space or enough available input TYPE -- reached end of block code, inflate() to interpret next block BAD -- error in block data Notes: - The maximum input bits used by a length/distance pair is 15 bits for the length code, 5 bits for the length extra, 15 bits for the distance code, and 13 bits for the distance extra. This totals 48 bits, or six bytes. Therefore if strm->avail_in >= 6, then there is enough input to avoid checking for available input while decoding. - The maximum bytes that a single length/distance pair can output is 258 bytes, which is the maximum length that can be coded. inflate_fast() requires strm->avail_out >= 258 for each loop to avoid checking for output space. */ typedef struct inffast_ar { /* 64 32 x86 x86_64 */ /* ar offset register */ /* 0 0 */ void *esp; /* esp save */ /* 8 4 */ void *ebp; /* ebp save */ /* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */ /* 24 12 */ unsigned char FAR *last; /* r9 while in < last */ /* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */ /* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */ /* 48 24 */ unsigned char FAR *end; /* r10 while out < end */ /* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */ /* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */ /* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */ /* 80 40 */ size_t /*unsigned long */hold; /* edx rdx local strm->hold */ /* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */ /* 92 48 */ unsigned wsize; /* window size */ /* 96 52 */ unsigned write; /* window write index */ /*100 56 */ unsigned lmask; /* r12 mask for lcode */ /*104 60 */ unsigned dmask; /* r13 mask for dcode */ /*108 64 */ unsigned len; /* r14 match length */ /*112 68 */ unsigned dist; /* r15 match distance */ /*116 72 */ unsigned status; /* set when state chng*/ } type_ar; #ifdef ASMINF void inflate_fast(strm, start) z_streamp strm; unsigned start; /* inflate()'s starting value for strm->avail_out */ { struct inflate_state FAR *state; type_ar ar; void inffas8664fnc(struct inffast_ar * par); #if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64)) #define PAD_AVAIL_IN 6 #define PAD_AVAIL_OUT 258 #else #define PAD_AVAIL_IN 5 #define PAD_AVAIL_OUT 257 #endif /* copy state to local variables */ state = (struct inflate_state FAR *)strm->state; ar.in = strm->next_in; ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN); ar.out = strm->next_out; ar.beg = ar.out - (start - strm->avail_out); ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT); ar.wsize = state->wsize; ar.write = state->write; ar.window = state->window; ar.hold = state->hold; ar.bits = state->bits; ar.lcode = state->lencode; ar.dcode = state->distcode; ar.lmask = (1U << state->lenbits) - 1; ar.dmask = (1U << state->distbits) - 1; /* decode literals and length/distances until end-of-block or not enough input data or output space */ /* align in on 1/2 hold size boundary */ while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) { ar.hold += (unsigned long)*ar.in++ << ar.bits; ar.bits += 8; } inffas8664fnc(&ar); if (ar.status > 1) { if (ar.status == 2) strm->msg = "invalid literal/length code"; else if (ar.status == 3) strm->msg = "invalid distance code"; else strm->msg = "invalid distance too far back"; state->mode = BAD; } else if ( ar.status == 1 ) { state->mode = TYPE; } /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ ar.len = ar.bits >> 3; ar.in -= ar.len; ar.bits -= ar.len << 3; ar.hold &= (1U << ar.bits) - 1; /* update state and return */ strm->next_in = ar.in; strm->next_out = ar.out; strm->avail_in = (unsigned)(ar.in < ar.last ? PAD_AVAIL_IN + (ar.last - ar.in) : PAD_AVAIL_IN - (ar.in - ar.last)); strm->avail_out = (unsigned)(ar.out < ar.end ? PAD_AVAIL_OUT + (ar.end - ar.out) : PAD_AVAIL_OUT - (ar.out - ar.end)); state->hold = (unsigned long)ar.hold; state->bits = ar.bits; return; } #endif
Go to most recent revision | Compare with Previous | Blame | View Log