URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [binutils-2.18.50/] [include/] [opcode/] [d10v.h] - Rev 851
Go to most recent revision | Compare with Previous | Blame | View Log
/* d10v.h -- Header file for D10V opcode table Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. Written by Martin Hunt (hunt@cygnus.com), Cygnus Support This file is part of GDB, GAS, and the GNU binutils. GDB, GAS, and the GNU binutils are free software; you can redistribute them and/or modify them under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GDB, GAS, and the GNU binutils are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this file; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef D10V_H #define D10V_H /* Format Specifier */ #define FM00 0 #define FM01 0x40000000 #define FM10 0x80000000 #define FM11 0xC0000000 #define NOP 0x5e00 #define OPCODE_DIVS 0x14002800 /* The opcode table is an array of struct d10v_opcode. */ struct d10v_opcode { /* The opcode name. */ const char *name; /* the opcode format */ int format; /* These numbers were picked so we can do if( i & SHORT_OPCODE) */ #define SHORT_OPCODE 1 #define LONG_OPCODE 8 #define SHORT_2 1 /* short with 2 operands */ #define SHORT_B 3 /* short with 8-bit branch */ #define LONG_B 8 /* long with 16-bit branch */ #define LONG_L 10 /* long with 3 operands */ #define LONG_R 12 /* reserved */ /* just a placeholder for variable-length instructions */ /* for example, "bra" will be a fake for "bra.s" and bra.l" */ /* which will immediately follow in the opcode table. */ #define OPCODE_FAKE 32 /* the number of cycles */ int cycles; /* the execution unit(s) used */ int unit; #define EITHER 0 #define IU 1 #define MU 2 #define BOTH 3 /* execution type; parallel or sequential */ /* this field is used to decide if two instructions */ /* can be executed in parallel */ int exec_type; #define PARONLY 1 /* parallel only */ #define SEQ 2 /* must be sequential */ #define PAR 4 /* may be parallel */ #define BRANCH_LINK 8 /* subroutine call. must be aligned */ #define RMEM 16 /* reads memory */ #define WMEM 32 /* writes memory */ #define RF0 64 /* reads f0 */ #define WF0 128 /* modifies f0 */ #define WCAR 256 /* write Carry */ #define BRANCH 512 /* branch, no link */ #define ALONE 1024 /* short but pack with a NOP if on asm line alone */ /* the opcode */ long opcode; /* mask. if( (i & mask) == opcode ) then match */ long mask; /* An array of operand codes. Each code is an index into the operand table. They appear in the order which the operands must appear in assembly code, and are terminated by a zero. */ unsigned char operands[6]; }; /* The table itself is sorted by major opcode number, and is otherwise in the order in which the disassembler should consider instructions. */ extern const struct d10v_opcode d10v_opcodes[]; extern const int d10v_num_opcodes; /* The operands table is an array of struct d10v_operand. */ struct d10v_operand { /* The number of bits in the operand. */ int bits; /* How far the operand is left shifted in the instruction. */ int shift; /* One bit syntax flags. */ int flags; }; /* Elements in the table are retrieved by indexing with values from the operands field of the d10v_opcodes table. */ extern const struct d10v_operand d10v_operands[]; /* Values defined for the flags field of a struct d10v_operand. */ /* the operand must be an even number */ #define OPERAND_EVEN (1) /* the operand must be an odd number */ #define OPERAND_ODD (2) /* this is the destination register; it will be modified */ /* this is used by the optimizer */ #define OPERAND_DEST (4) /* number or symbol */ #define OPERAND_NUM (8) /* address or label */ #define OPERAND_ADDR (0x10) /* register */ #define OPERAND_REG (0x20) /* postincrement + */ #define OPERAND_PLUS (0x40) /* postdecrement - */ #define OPERAND_MINUS (0x80) /* @ */ #define OPERAND_ATSIGN (0x100) /* @( */ #define OPERAND_ATPAR (0x200) /* accumulator 0 */ #define OPERAND_ACC0 (0x400) /* accumulator 1 */ #define OPERAND_ACC1 (0x800) /* f0 / f1 flag register */ #define OPERAND_FFLAG (0x1000) /* c flag register */ #define OPERAND_CFLAG (0x2000) /* control register */ #define OPERAND_CONTROL (0x4000) /* predecrement mode '@-sp' */ #define OPERAND_ATMINUS (0x8000) /* signed number */ #define OPERAND_SIGNED (0x10000) /* special accumulator shifts need a 4-bit number */ /* 1 <= x <= 16 */ #define OPERAND_SHIFT (0x20000) /* general purpose register */ #define OPERAND_GPR (0x40000) /* special imm3 values with range restricted to -2 <= imm3 <= 3 */ /* needed for rac/rachi */ #define RESTRICTED_NUM3 (0x80000) /* Pre-decrement is only supported for SP. */ #define OPERAND_SP (0x100000) /* Post-decrement is not supported for SP. Like OPERAND_EVEN, and unlike OPERAND_SP, this flag doesn't prevent the instruction from matching, it only fails validation later on. */ #define OPERAND_NOSP (0x200000) /* Structure to hold information about predefined registers. */ struct pd_reg { char *name; /* name to recognize */ char *pname; /* name to print for this register */ int value; }; extern const struct pd_reg d10v_predefined_registers[]; int d10v_reg_name_cnt (void); /* an expressionS only has one register type, so we fake it */ /* by setting high bits to indicate type */ #define REGISTER_MASK 0xFF #endif /* D10V_H */
Go to most recent revision | Compare with Previous | Blame | View Log