Subversion Repositories openrisc

# This is for embedded products (no MMU) with ELF.
MACHINE=
SCRIPT_NAME=elf
TEMPLATE_NAME=elf32
 
# Symbols have underscore prepended.
OUTPUT_FORMAT="elf32-us-cris"
ARCH=cris
MAXPAGESIZE=32
ENTRY=__start
EMBEDDED=yes
ALIGNMENT=32
TEXT_START_ADDR=0
 
# Put crt0 for flash/eprom etc. in this section.
INITIAL_READONLY_SECTIONS=
if test -z "${CREATE_SHLIB}"; then
  INITIAL_READONLY_SECTIONS=".interp       ${RELOCATING-0} : { *(.interp) }"
fi
INITIAL_READONLY_SECTIONS="${INITIAL_READONLY_SECTIONS}
  .startup : { KEEP(*(.startup)) }"
 
# Setting __Stext to . in TEXT_START_SYMBOLS doesn't get what we want
# most of the time, which is the start of all read-only sections;
# there's at least .startup and .init before it.  We have to resort to
# trickery.  Note that __Stext is always defined, not PROVIDE:d, since
# external tools look for it.
TEXT_START_SYMBOLS='__Stext = ADDR (.startup);'
 
# The __start dance is to get us through assumptions about entry
# symbols, and to clear _start for normal use with sane programs.
EXECUTABLE_SYMBOLS='
__start = DEFINED(__start) ? __start : 
  DEFINED(_start) ? _start : 
    DEFINED(start) ? start :
      DEFINED(.startup) ? .startup + 2 : 2;
'
 
# Smuggle an "OTHER_TEXT_END_SYMBOLS" here.
OTHER_READONLY_SECTIONS="${RELOCATING+PROVIDE (__Etext = .);}"
DATA_START_SYMBOLS='PROVIDE (__Sdata = .);'
 
# Smuggle an "OTHER_DATA_END_SYMBOLS" here.
OTHER_SDATA_SECTIONS="${RELOCATING+PROVIDE (__Edata = .);}"
 
# If .bss does not immediately follow .data but has its own start
# address, we can't get to it with OTHER_BSS_SYMBOLS, neither can we
# use ADDR(.bss) there.  Instead, we use the symbol support for the
# end symbol.
OTHER_BSS_END_SYMBOLS='
 PROVIDE (__Ebss = .);
 __Sbss = ADDR (.bss);
 PROVIDE (_bss_start = __Sbss);
'
OTHER_END_SYMBOLS='PROVIDE (__end = .);'
 
INIT_START='
 . = ALIGN(2);
 ___init__start = .;
 PROVIDE (___do_global_ctors = .);
'
 
INIT_END='
 PROVIDE (__init__end = .);
 PROVIDE (___init__end = .);
'
 
FINI_START='
 . = ALIGN (2);
 ___fini__start = .;
 PROVIDE (___do_global_dtors = .);
'
 
FINI_END='
 PROVIDE (__fini__end = .);
 ___fini__end = .;
'
 
CTOR_START='
 PROVIDE (___ctors = .);
 ___elf_ctors_dtors_begin = .;
'
 
CTOR_END='
 PROVIDE (___ctors_end = .);
'
 
DTOR_START='
 PROVIDE (___dtors = .);
'
 
CTOR_END='
 PROVIDE (___dtors_end = .);
 ___elf_ctors_dtors_end = .;
'
 
# Also add the other symbols provided for rsim/xsim and elinux.
OTHER_SYMBOLS='
  PROVIDE (__Eall = .);
  PROVIDE (__Endmem = 0x10000000); 
  PROVIDE (__Stacksize = 0);
'
NO_SMALL_DATA=yes