OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [config/] [m32c/] [m32c-lib1.S] - Rev 38

Go to most recent revision | Compare with Previous | Blame | View Log

/* libgcc routines for R8C/M16C/M32C
   Copyright (C) 2005
   Free Software Foundation, Inc.
   Contributed by Red Hat.

   This file is part of GCC.

   GCC is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published
   by the Free Software Foundation; either version 2, or (at your
   option) any later version.

   In addition to the permissions in the GNU General Public License,
   the Free Software Foundation gives you unlimited permission to link
   the compiled version of this file into combinations with other
   programs, and to distribute those combinations without any
   restriction coming from the use of this file.  (The General Public
   License restrictions do apply in other respects; for example, they
   cover modification of the file, and distribution when not linked
   into a combine executable.)

   GCC is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
   License for more details.

   You should have received a copy of the GNU General Public License
   along with GCC; see the file COPYING.  If not, write to the Free
   Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
   02110-1301, USA.  */

#if defined(__r8c_cpu__) || defined(__m16c_cpu__)
#define A16
#define A(n,w) n
#define W w
#else
#define A24
#define A(n,w) w
#define W l
#endif


#ifdef L__m32c_memregs

/* Warning: these memory locations are used as a register bank.  They
   *must* end up consecutive in any final executable, so you may *not*
   use the otherwise obvious ".comm" directive to allocate space for
   them. */

        .bss
        .global mem0
mem0:   .space  1
        .global mem1
mem1:   .space  1
        .global mem2
mem2:   .space  1
        .global mem3
mem3:   .space  1
        .global mem4
mem4:   .space  1
        .global mem5
mem5:   .space  1
        .global mem6
mem6:   .space  1
        .global mem7
mem7:   .space  1
        .global mem8
mem8:   .space  1
        .global mem9
mem9:   .space  1
        .global mem10
mem10:  .space  1
        .global mem11
mem11:  .space  1
        .global mem12
mem12:  .space  1
        .global mem13
mem13:  .space  1
        .global mem14
mem14:  .space  1
        .global mem15
mem15:  .space  1

#endif

#ifdef L__m32c_eh_return
        .text
        .global __m32c_eh_return
__m32c_eh_return:       

        /* At this point, r0 has the stack adjustment, r1r3 has the
           address to return to.  The stack looks like this:

           old_ra
           old_fp
           <- unwound sp
           ...
           fb
           through
           r0
           <- sp

           What we need to do is restore all the registers, update the
           stack, and return to the right place.
        */

        stc     sp,a0
        
        add.W   A(#16,#24),a0
        /* a0 points to the current stack, just above the register
           save areas */

        mov.w   a0,a1
        exts.w  r0
        sub.W   A(r0,r2r0),a1
        sub.W   A(#3,#4),a1
        /* a1 points to the new stack.  */

        /* This is for the "rts" below.  */
        mov.w   r1,[a1]
#ifdef A16
        mov.w   r2,r1
        mov.b   r1l,2[a1]
#else
        mov.w   r2,2[a1]
#endif

        /* This is for the "popc sp" below.  */
        mov.W   a1,[a0] 

        popm    r0,r1,r2,r3,a0,a1,sb,fb
        popc    sp
        rts
#endif

/* SImode arguments for SI foo(SI,SI) functions.  */
#ifdef A16
#define SAL  5[fb]
#define SAH  7[fb]
#define SBL  9[fb]
#define SBH 11[fb]
#else
#define SAL  8[fb]
#define SAH 10[fb]
#define SBL 12[fb]
#define SBH 14[fb]
#endif

#ifdef L__m32c_mulsi3
        .text
        .global ___mulsi3
___mulsi3:
        enter   #0
        push.w  r2
        mov.w   SAL,r0
        mulu.w  SBL,r0          /* writes to r2r0 */
        mov.w   r0,mem0
        mov.w   r2,mem2
        mov.w   SAL,r0
        mulu.w  SBH,r0          /* writes to r2r0 */
        add.w   r0,mem2
        mov.w   SAH,r0
        mulu.w  SBL,r0          /* writes to r2r0 */
        add.w   r0,mem2
        pop.w   r2
        exitd
#endif

#ifdef L__m32c_cmpsi2
        .text
        .global ___cmpsi2
___cmpsi2:
        enter   #0
        cmp.w   SBH,SAH
        jgt     cmpsi_gt
        jlt     cmpsi_lt
        cmp.w   SBL,SAL
        jgt     cmpsi_gt
        jlt     cmpsi_lt
        mov.w   #1,r0
        exitd
cmpsi_gt:
        mov.w   #2,r0
        exitd
cmpsi_lt:
        mov.w   #0,r0
        exitd
#endif

#ifdef L__m32c_ucmpsi2
        .text
        .global ___ucmpsi2
___ucmpsi2:
        enter   #0
        cmp.w   SBH,SAH
        jgtu    cmpsi_gt
        jltu    cmpsi_lt
        cmp.w   SBL,SAL
        jgtu    cmpsi_gt
        jltu    cmpsi_lt
        mov.w   #1,r0
        exitd
cmpsi_gt:
        mov.w   #2,r0
        exitd
cmpsi_lt:
        mov.w   #0,r0
        exitd
#endif

#ifdef L__m32c_jsri16
        .data
m32c_jsri_addr:
        .byte   0, 0, 0
m32c_jsri_ret:
        .byte   0, 0, 0

        .text
        .global m32c_jsri16
m32c_jsri16:
        pop.w   m32c_jsri_ret
        pop.b   m32c_jsri_ret+2
        pop.w   m32c_jsri_addr
        push.b  m32c_jsri_ret+2
        push.w  m32c_jsri_ret
        jmpi.a  m32c_jsri_addr

#endif

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.