OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [config/] [m68hc11/] [larith.asm] - Rev 38

Go to most recent revision | Compare with Previous | Blame | View Log

/* libgcc routines for M68HC11 & M68HC12.
   Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2, or (at your option) any
later version.

In addition to the permissions in the GNU General Public License, the
Free Software Foundation gives you unlimited permission to link the
compiled version of this file with other programs, and to distribute
those programs without any restriction coming from the use of this
file.  (The General Public License restrictions do apply in other
respects; for example, they cover modification of the file, and
distribution when not linked into another program.)

This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; see the file COPYING.  If not, write to
the Free Software Foundation, 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA.  */

/* As a special exception, if you link this library with other files,
   some of which are compiled with GCC, to produce an executable,
   this library does not by itself cause the resulting executable
   to be covered by the GNU General Public License.
   This exception does not however invalidate any other reasons why
   the executable file might be covered by the GNU General Public License.  */

        .file "larith.asm"

#ifdef __HAVE_SHORT_INT__
        .mode mshort
#else
        .mode mlong
#endif

        .macro declare_near name
        .globl \name
        .type  \name,@function
        .size  \name,.Lend-\name
\name:
        .endm

#if defined(__USE_RTC__)
# define ARG(N) N+1

        .macro ret
#if defined(mc68hc12)
        rtc
#else
        jmp __return_32
#endif
        .endm

        .macro declare name
        .globl \name
        .type  \name,@function
        .size  \name,.Lend-\name
        .far   \name
\name:
        .endm

        .macro farsym name
        .far NAME
        .endm

#else
# define ARG(N) N

        .macro ret
        rts
        .endm

        .macro farsym name
        .endm

        .macro declare name
        .globl \name
        .type  \name,@function
        .size  \name,.Lend-\name
\name:
        .endm

#endif

        .sect .text
        

#define REG(NAME)                       \
NAME:   .dc.w   1;                      \
        .type NAME,@object ;            \
        .size NAME,2

#ifdef L_regs_min
/* Pseudo hard registers used by gcc.
   They should be located in page0.  */

        .sect .softregs
        .globl _.tmp
        .globl _.z,_.xy
REG(_.tmp)
REG(_.z)
REG(_.xy)

#endif

#ifdef L_regs_frame
        .sect .softregs
        .globl _.frame
REG(_.frame)
#endif

#ifdef L_regs_d1_2
        .sect .softregs
        .globl _.d1,_.d2
REG(_.d1)
REG(_.d2)
#endif

#ifdef L_regs_d3_4
        .sect .softregs
        .globl _.d3,_.d4
REG(_.d3)
REG(_.d4)
#endif

#ifdef L_regs_d5_6
        .sect .softregs
        .globl _.d5,_.d6
REG(_.d5)
REG(_.d6)
#endif

#ifdef L_regs_d7_8
        .sect .softregs
        .globl _.d7,_.d8
REG(_.d7)
REG(_.d8)
#endif

#ifdef L_regs_d9_16
/* Pseudo hard registers used by gcc.
   They should be located in page0.  */
        .sect .softregs
        .globl _.d9,_.d10,_.d11,_.d12,_.d13,_.d14
        .globl _.d15,_.d16
REG(_.d9)
REG(_.d10)
REG(_.d11)
REG(_.d12)
REG(_.d13)
REG(_.d14)
REG(_.d15)
REG(_.d16)

#endif

#ifdef L_regs_d17_32
/* Pseudo hard registers used by gcc.
   They should be located in page0.  */
        .sect .softregs
        .globl _.d17,_.d18,_.d19,_.d20,_.d21,_.d22
        .globl _.d23,_.d24,_.d25,_.d26,_.d27,_.d28
        .globl _.d29,_.d30,_.d31,_.d32
REG(_.d17)
REG(_.d18)
REG(_.d19)
REG(_.d20)
REG(_.d21)
REG(_.d22)
REG(_.d23)
REG(_.d24)
REG(_.d25)
REG(_.d26)
REG(_.d27)
REG(_.d28)
REG(_.d29)
REG(_.d30)
REG(_.d31)
REG(_.d32)
#endif

#ifdef L_premain
;;
;; Specific initialization for 68hc11 before the main.
;; Nothing special for a generic routine; Just enable interrupts.
;;
        declare_near    __premain
        clra
        tap     ; Clear both I and X.
        rts
#endif

#ifdef L__exit
;;
;; Exit operation.  Just loop forever and wait for interrupts.
;; (no other place to go)
;; This operation is split in several pieces collected together by
;; the linker script.  This allows to support destructors at the
;; exit stage while not impacting program sizes when there is no
;; destructors.
;;
;; _exit:
;;    *(.fini0)         /* Beginning of finish code (_exit symbol).  */
;;    *(.fini1)         /* Place holder for applications.  */
;;    *(.fini2)         /* C++ destructors.  */
;;    *(.fini3)         /* Place holder for applications.  */
;;    *(.fini4)         /* Runtime exit.  */
;;
        .sect .fini0,"ax",@progbits
        .globl _exit
        .globl exit
        .weak  exit
        farsym  exit
        farsym  _exit
exit:
_exit:

        .sect .fini4,"ax",@progbits
fatal:
        cli
        wai
        bra fatal
#endif

#ifdef L_abort
;;
;; Abort operation.  This is defined for the GCC testsuite.
;;
        declare abort

        ldd     #255            ; 
#ifdef mc68hc12
        trap    #0x30
#else
        .byte 0xCD              ; Generate an illegal instruction trap
        .byte 0x03              ; The simulator catches this and stops.
#endif
        jmp _exit
#endif
        
#ifdef L_cleanup
;;
;; Cleanup operation used by exit().
;;
        declare _cleanup

        ret
#endif

;-----------------------------------------
; required gcclib code
;-----------------------------------------
#ifdef L_memcpy
       declare  memcpy
       declare  __memcpy

        .weak memcpy
;;;
;;; void* memcpy(void*, const void*, size_t)
;;; 
;;; D    = dst  Pmode
;;; 2,sp = src  Pmode
;;; 4,sp = size HImode (size_t)
;;; 
#ifdef mc68hc12
        ldx     ARG(2),sp
        ldy     ARG(4),sp
        pshd
        xgdy
        lsrd
        bcc     Start
        movb    1,x+,1,y+
Start:
        beq     Done
Loop:
        movw    2,x+,2,y+
        dbne    d,Loop
Done:
        puld
        ret
#else
        xgdy
        tsx
        ldd     ARG(4),x
        ldx     ARG(2),x        ; SRC = X, DST = Y
        cpd     #0
        beq     End
        pshy
        inca                    ; Correction for the deca below
L0:
        psha                    ; Save high-counter part
L1:
        ldaa    0,x             ; Copy up to 256 bytes
        staa    0,y
        inx
        iny
        decb
        bne     L1
        pula
        deca
        bne     L0
        puly                    ; Restore Y to return the DST
End:
        xgdy
        ret
#endif
#endif

#ifdef L_memset
       declare  memset
       declare  __memset
;;;
;;; void* memset(void*, int value, size_t)
;;; 
#ifndef __HAVE_SHORT_INT__
;;; D    = dst  Pmode
;;; 2,sp = src  SImode
;;; 6,sp = size HImode (size_t)
        val  = ARG(5)
        size = ARG(6)
#else
;;; D    = dst  Pmode
;;; 2,sp = src  SImode
;;; 6,sp = size HImode (size_t)
        val  = ARG(3)
        size = ARG(4)
#endif
#ifdef mc68hc12
        xgdx
        ldab    val,sp
        ldy     size,sp
        pshx
        beq     End
Loop:
        stab    1,x+
        dbne    y,Loop
End:
        puld
        ret
#else
        xgdx
        tsy
        ldab    val,y
        ldy     size,y          ; DST = X, CNT = Y
        beq     End
        pshx
L0:
        stab    0,x             ; Fill up to 256 bytes
        inx
        dey
        bne     L0
        pulx                    ; Restore X to return the DST
End:
        xgdx
        ret
#endif
#endif

#ifdef L_adddi3
        declare ___adddi3

        tsx
        xgdy
        ldd     ARG(8),x                ; Add LSB
        addd    ARG(16),x
        std     6,y             ; Save (carry preserved)

        ldd     ARG(6),x
        adcb    ARG(15),x
        adca    ARG(14),x
        std     4,y

        ldd     ARG(4),x
        adcb    ARG(13),x
        adca    ARG(12),x
        std     2,y
        
        ldd     ARG(2),x
        adcb    ARG(11),x               ; Add MSB
        adca    ARG(10),x
        std     0,y

        xgdy
        ret
#endif

#ifdef L_subdi3
        declare ___subdi3

        tsx
        xgdy
        ldd     ARG(8),x                ; Subtract LSB
        subd    ARG(16),x
        std     6,y                     ; Save, borrow preserved

        ldd     ARG(6),x
        sbcb    ARG(15),x
        sbca    ARG(14),x
        std     4,y

        ldd     ARG(4),x
        sbcb    ARG(13),x
        sbca    ARG(12),x
        std     2,y
        
        ldd     ARG(2),x                ; Subtract MSB
        sbcb    ARG(11),x
        sbca    ARG(10),x
        std     0,y

        xgdy                    ;
        ret
#endif
        
#ifdef L_notdi2
        declare ___notdi2

        tsy
        xgdx
        ldd     ARG(8),y
        coma
        comb
        std     6,x
        
        ldd     ARG(6),y
        coma
        comb
        std     4,x

        ldd     ARG(4),y
        coma
        comb
        std     2,x

        ldd     ARG(2),y
        coma
        comb
        std     0,x
        xgdx
        ret
#endif
        
#ifdef L_negsi2
        declare_near ___negsi2

        comb
        coma
        xgdx
        comb
        coma
        inx
        xgdx
        bne     done
        inx
done:
        rts
#endif

#ifdef L_one_cmplsi2
        declare_near ___one_cmplsi2

        comb
        coma
        xgdx
        comb
        coma
        xgdx
        rts
#endif
        
#ifdef L_ashlsi3
        declare_near ___ashlsi3

        xgdy
        clra
        andb    #0x1f
        xgdy
        beq     Return
Loop:
        lsld
        xgdx
        rolb
        rola
        xgdx
        dey
        bne     Loop
Return:
        rts
#endif

#ifdef L_ashrsi3
        declare_near ___ashrsi3

        xgdy
        clra
        andb    #0x1f
        xgdy
        beq     Return
Loop:
        xgdx
        asra
        rorb
        xgdx
        rora
        rorb
        dey
        bne     Loop
Return:
        rts
#endif

#ifdef L_lshrsi3
        declare_near ___lshrsi3

        xgdy
        clra
        andb    #0x1f
        xgdy
        beq     Return
Loop:
        xgdx
        lsrd
        xgdx
        rora
        rorb
        dey
        bne     Loop
Return:
        rts
#endif

#ifdef L_lshrhi3
        declare_near ___lshrhi3

        cpx     #16
        bge     Return_zero
        cpx     #0
        beq     Return
Loop:
        lsrd
        dex
        bne     Loop
Return:
        rts
Return_zero:
        clra
        clrb
        rts
#endif
        
#ifdef L_lshlhi3
        declare_near ___lshlhi3

        cpx     #16
        bge     Return_zero
        cpx     #0
        beq     Return
Loop:
        lsld
        dex
        bne     Loop
Return:
        rts
Return_zero:
        clra
        clrb
        rts
#endif

#ifdef L_rotrhi3
        declare_near ___rotrhi3

___rotrhi3:
        xgdx
        clra
        andb    #0x0f
        xgdx
        beq     Return
Loop:
        tap
        rorb
        rora
        dex
        bne     Loop
Return:
        rts
#endif

#ifdef L_rotlhi3
        declare_near ___rotlhi3

___rotlhi3:
        xgdx
        clra
        andb    #0x0f
        xgdx
        beq     Return
Loop:
        asrb
        rolb
        rola
        rolb
        dex
        bne     Loop
Return:
        rts
#endif

#ifdef L_ashrhi3
        declare_near ___ashrhi3

        cpx     #16
        bge     Return_minus_1_or_zero
        cpx     #0
        beq     Return
Loop:
        asra
        rorb
        dex
        bne     Loop
Return:
        rts
Return_minus_1_or_zero:
        clrb
        tsta
        bpl     Return_zero
        comb
Return_zero:
        tba
        rts
#endif
        
#ifdef L_ashrqi3
        declare_near ___ashrqi3

        cmpa    #8
        bge     Return_minus_1_or_zero
        tsta
        beq     Return
Loop:
        asrb
        deca
        bne     Loop
Return:
        rts
Return_minus_1_or_zero:
        clrb
        tstb
        bpl     Return_zero
        coma
Return_zero:
        tab
        rts
#endif

#ifdef L_lshlqi3
        declare_near ___lshlqi3

        cmpa    #8
        bge     Return_zero
        tsta
        beq     Return
Loop:
        lslb
        deca
        bne     Loop
Return:
        rts
Return_zero:
        clrb
        rts
#endif

#ifdef L_divmodhi4
#ifndef mc68hc12
/* 68HC12 signed divisions are generated inline (idivs).  */

        declare_near __divmodhi4

;
;; D = numerator
;; X = denominator
;;
;; Result:      D = D / X
;;              X = D % X
;; 
        tsta
        bpl     Numerator_pos
        comb                    ; D = -D <=> D = (~D) + 1
        coma
        xgdx
        inx
        tsta
        bpl     Numerator_neg_denominator_pos
Numerator_neg_denominator_neg:
        comb                    ; X = -X
        coma
        addd    #1
        xgdx
        idiv
        coma
        comb
        xgdx                    ; Remainder <= 0 and result >= 0
        inx
        rts

Numerator_pos_denominator_pos:
        xgdx
        idiv
        xgdx                    ; Both values are >= 0
        rts
        
Numerator_pos:
        xgdx
        tsta
        bpl     Numerator_pos_denominator_pos
Numerator_pos_denominator_neg:
        coma                    ; X = -X
        comb
        xgdx
        inx
        idiv
        xgdx                    ; Remainder >= 0 but result <= 0
        coma
        comb
        addd    #1
        rts
        
Numerator_neg_denominator_pos:
        xgdx
        idiv
        coma                    ; One value is > 0 and the other < 0
        comb                    ; Change the sign of result and remainder
        xgdx
        inx
        coma
        comb
        addd    #1
        rts
#endif /* !mc68hc12 */
#endif

#ifdef L_mulqi3
        declare_near ___mulqi3

;
; short __mulqi3(signed char a, signed char b);
;
;       signed char a   -> register A
;       signed char b   -> register B
;
; returns the signed result of A * B in register D.
;
        tsta
        bmi     A_neg
        tstb
        bmi     B_neg
        mul
        rts
B_neg:
        negb
        bra     A_or_B_neg
A_neg:
        nega
        tstb
        bmi     AB_neg
A_or_B_neg:
        mul
        coma
        comb
        addd    #1
        rts
AB_neg:
        negb
        mul
        rts
#endif
        
#ifdef L_mulhi3
        declare_near ___mulhi3

;
;
;  unsigned short ___mulhi3(unsigned short a, unsigned short b)
;
;       a = register D
;       b = register X
;
#ifdef mc68hc12
        pshx                    ; Preserve X
        exg     x,y
        emul
        exg     x,y
        pulx
        rts
#else
#ifdef NO_TMP
        ;
        ; 16 bit multiplication without temp memory location.
        ; (smaller but slower)
        ;
        pshx                    ; (4)
        ins                     ; (3)
        pshb                    ; (3)
        psha                    ; (3)
        pshx                    ; (4)
        pula                    ; (4)
        pulx                    ; (5)
        mul                     ; (10) B.high * A.low
        xgdx                    ; (3)
        mul                     ; (10) B.low * A.high
        abx                     ; (3)
        pula                    ; (4)
        pulb                    ; (4)
        mul                     ; (10) B.low * A.low
        pshx                    ; (4) 
        tsx                     ; (3)
        adda    1,x             ; (4)
        pulx                    ; (5)
        rts                     ; (5) 20 bytes
                                ; ---
                                ; 91 cycles
#else
        stx     *_.tmp          ; (4)
        pshb                    ; (3)
        ldab    *_.tmp+1        ; (3)
        mul                     ; (10) A.high * B.low
        ldaa    *_.tmp          ; (3)
        stab    *_.tmp          ; (3)
        pulb                    ; (4)
        pshb                    ; (4)
        mul                     ; (10) A.low * B.high
        addb    *_.tmp          ; (4)
        stab    *_.tmp          ; (3)
        ldaa    *_.tmp+1        ; (3)
        pulb                    ; (4)
        mul                     ; (10) A.low * B.low
        adda    *_.tmp          ; (4)
        rts                     ; (5) 24/32 bytes
                                ; 77/85 cycles
#endif
#endif
#endif

#ifdef L_mulhi32

;
;
;  unsigned long __mulhi32(unsigned short a, unsigned short b)
;
;       a = register D
;       b = value on stack
;
;       +---------------+
;       |  B low        | <- 7,x
;       +---------------+
;       |  B high       | <- 6,x
;       +---------------+
;       |  PC low       |  
;       +---------------+
;       |  PC high      |  
;       +---------------+
;       |  Tmp low      |
;       +---------------+
;       |  Tmp high     |
;       +---------------+
;       |  A low        |
;       +---------------+
;       |  A high       |
;       +---------------+  <- 0,x
;
;
;      <B-low>    5,x
;      <B-high>   4,x
;      <ret>      2,x
;      <A-low>    1,x
;      <A-high>   0,x
;
        declare_near    __mulhi32

#ifdef mc68hc12
        ldy     2,sp
        emul
        exg     x,y
        rts
#else
        pshx                    ; Room for temp value
        pshb
        psha
        tsx
        ldab    6,x
        mul
        xgdy                    ; A.high * B.high
        ldab    7,x
        pula
        mul                     ; A.high * B.low
        std     2,x
        ldaa    1,x
        ldab    6,x
        mul                     ; A.low * B.high
        addd    2,x
        stab    2,x
        tab
        aby
        bcc     N
        ldab    #0xff
        aby
        iny
N:
        ldab    7,x
        pula
        mul                     ; A.low * B.low
        adda    2,x
        pulx                    ; Drop temp location
        pshy                    ; Put high part in X
        pulx
        bcc     Ret
        inx
Ret:
        rts
#endif  
#endif

#ifdef L_mulsi3

;
;      <B-low>    8,y
;      <B-high>   6,y
;      <ret>      4,y
;       <tmp>     2,y
;      <A-low>    0,y
;
; D,X   -> A
; Stack -> B
;
; The result is:
;
;       (((A.low * B.high) + (A.high * B.low)) << 16) + (A.low * B.low)
;
;
;

        declare __mulsi3

#ifdef mc68hc12
        pshd                            ; Save A.low
        ldy     ARG(4),sp
        emul                            ; A.low * B.high
        ldy     ARG(6),sp
        exg     x,d
        emul                            ; A.high * B.low
        leax    d,x
        ldy     ARG(6),sp
        puld
        emul                            ; A.low * B.low
        exg     d,y
        leax    d,x
        exg     d,y
        ret
#else
B_low   =       ARG(8)
B_high  =       ARG(6)
A_low   =       0
A_high  =       2
        pshx
        pshb
        psha
        tsy
;
; If B.low is 0, optimize into: (A.low * B.high) << 16
;
        ldd     B_low,y
        beq     B_low_zero
;
; If A.high is 0, optimize into: (A.low * B.high) << 16 + (A.low * B.low)
;
        cpx     #0
        beq     A_high_zero
        bsr     ___mulhi3               ; A.high * B.low
;
; If A.low is 0, optimize into: (A.high * B.low) << 16
;
        ldx     A_low,y
        beq     A_low_zero              ; X = 0, D = A.high * B.low
        std     2,y
;
; If B.high is 0, we can avoid the (A.low * B.high) << 16 term.
;
        ldd     B_high,y
        beq     B_high_zero
        bsr     ___mulhi3               ; A.low * B.high
        addd    2,y
        std     2,y
;
; Here, we know that A.low and B.low are not 0.
;
B_high_zero:
        ldd     B_low,y                 ; A.low is on the stack
        bsr     __mulhi32               ; A.low * B.low
        xgdx
        tsy                             ; Y was clobbered, get it back
        addd    2,y
A_low_zero:                             ; See A_low_zero_non_optimized below
        xgdx
Return:
        ins
        ins
        ins
        ins
        ret
;
; 
; A_low_zero_non_optimized:
;
; At this step, X = 0 and D = (A.high * B.low)
; Optimize into: (A.high * B.low) << 16
;
;       xgdx
;       clra                    ; Since X was 0, clearing D is superfuous.
;       clrb
;       bra     Return
; ----------------
; B.low == 0, the result is:    (A.low * B.high) << 16
;
; At this step:
;   D = B.low                           = 0 
;   X = A.high                          ?
;       A.low is at A_low,y             ?
;       B.low is at B_low,y             ?
;
B_low_zero:
        ldd     A_low,y
        beq     Zero1
        ldx     B_high,y
        beq     Zero2
        bsr     ___mulhi3
Zero1:
        xgdx
Zero2:
        clra
        clrb
        bra     Return
; ----------------
; A.high is 0, optimize into: (A.low * B.high) << 16 + (A.low * B.low)
;
; At this step:
;   D = B.low                           != 0 
;   X = A.high                          = 0
;       A.low is at A_low,y             ?
;       B.low is at B_low,y             ?
;
A_high_zero:
        ldd     A_low,y         ; A.low
        beq     Zero1
        ldx     B_high,y        ; B.high
        beq     A_low_B_low
        bsr     ___mulhi3
        std     2,y
        bra     B_high_zero     ; Do the (A.low * B.low) and the add.

; ----------------
; A.high and B.high are 0 optimize into: (A.low * B.low)
;
; At this step:
;   D = B.high                          = 0 
;   X = A.low                           != 0
;       A.low is at A_low,y             != 0
;       B.high is at B_high,y           = 0
;
A_low_B_low:
        ldd     B_low,y                 ; A.low is on the stack
        bsr     __mulhi32
        bra     Return
#endif
#endif

#ifdef L_map_data

        .sect   .install2,"ax",@progbits
        .globl  __map_data_section
        .globl __data_image
#ifdef mc68hc12
        .globl __data_section_size
#endif
__map_data_section:
#ifdef mc68hc12
        ldx     #__data_image
        ldy     #__data_section_start
        ldd     #__data_section_size
        beq     Done
Loop:
        movb    1,x+,1,y+
        dbne    d,Loop
#else
        ldx     #__data_image
        ldy     #__data_section_start
        bra     Start_map
Loop:
        ldaa    0,x
        staa    0,y
        inx
        iny
Start_map:
        cpx     #__data_image_end
        blo     Loop
#endif
Done:

#endif

#ifdef L_init_bss

        .sect   .install2,"ax",@progbits
        .globl  __init_bss_section

__init_bss_section:
        ldd     #__bss_size
        beq     Done
        ldx     #__bss_start
Loop:
#ifdef mc68hc12
        clr     1,x+
        dbne    d,Loop
#else
        clr     0,x
        inx
        subd    #1
        bne     Loop
#endif
Done:

#endif

#ifdef L_ctor

; End of constructor table
        .sect   .install3,"ax",@progbits
        .globl  __do_global_ctors

__do_global_ctors:
        ; Start from the end - sizeof(void*)
        ldx     #__CTOR_END__-2
ctors_loop:
        cpx     #__CTOR_LIST__
        blo     ctors_done
        pshx
        ldx     0,x
        jsr     0,x
        pulx
        dex
        dex
        bra     ctors_loop
ctors_done:

#endif

#ifdef L_dtor

        .sect   .fini3,"ax",@progbits
        .globl  __do_global_dtors

;;
;; This piece of code is inserted in the _exit() code by the linker.
;;
__do_global_dtors:
        pshb    ; Save exit code
        psha
        ldx     #__DTOR_LIST__
dtors_loop:
        cpx     #__DTOR_END__
        bhs     dtors_done
        pshx
        ldx     0,x
        jsr     0,x
        pulx
        inx
        inx
        bra     dtors_loop
dtors_done:
        pula    ; Restore exit code
        pulb

#endif

#ifdef L_far_tramp
#ifdef mc68hc12
        .sect   .tramp,"ax",@progbits
        .globl  __far_trampoline

;; This is a trampoline used by the linker to invoke a function
;; using rtc to return and being called with jsr/bsr.
;; The trampoline generated is:
;;
;;      foo_tramp:
;;              ldy     #foo
;;              call    __far_trampoline,page(foo)
;;
;; The linker transforms:
;;
;;              jsr     foo
;;
;; into
;;              jsr     foo_tramp
;;
;; The linker generated trampoline and _far_trampoline must be in 
;; non-banked memory.
;;
__far_trampoline:
        movb    0,sp, 2,sp      ; Copy page register below the caller's return
        leas    2,sp            ; address.
        jmp     0,y             ; We have a 'call/rtc' stack layout now
                                ; and can jump to the far handler
                                ; (whose memory bank is mapped due to the
                                ; call to the trampoline).
#endif

#ifdef mc68hc11
        .sect   .tramp,"ax",@progbits
        .globl __far_trampoline

;; Trampoline generated by gcc for 68HC11:
;;
;;      pshb
;;      ldab    #%page(func)
;;      ldy     #%addr(func)
;;      jmp     __far_trampoline
;;
__far_trampoline:
        psha                            ; (2) Save function parameter (high)
        ;; <Read current page in A>
        psha                            ; (2)
        ;; <Set currenge page from B>
        pshx                            ; (4)
        tsx                             ; (3)
        ldab    4,x                     ; (4) Restore function parameter (low)
        ldaa    2,x                     ; (4) Get saved page number
        staa    4,x                     ; (4) Save it below return PC
        pulx                            ; (5)
        pula                            ; (3)
        pula                            ; (3) Restore function parameter (high)
        jmp     0,y                     ; (4)
#endif
#endif

#ifdef L_call_far
#ifdef mc68hc11
        .sect   .tramp,"ax",@progbits
        .globl __call_a16
        .globl __call_a32
;;
;; The call methods are used for 68HC11 to support memory bank switching.
;; Every far call is redirected to these call methods.  Its purpose is to:
;;
;;  1/ Save the current page on the stack (1 byte to follow 68HC12 call frame)
;;  2/ Install the new page
;;  3/ Jump to the real function
;;
;; The page switching (get/save) is board dependent.  The default provided
;; here does nothing (just create the appropriate call frame).
;;
;; Call sequence (10 bytes, 13 cycles):
;;
;;      ldx #page                       ; (3)
;;      ldy #func                       ; (4)
;;      jsr __call_a16                  ; (6)
;;
;; Call trampoline (11 bytes, 19 cycles):
;;
__call_a16:
        ;; xgdx                         ; (3)
        ;; <Read current page in A>     ; (3) ldaa _current_page
        psha                            ; (2)
        ;; <Set current page from B>    ; (4) staa _current_page
        ;; xgdx                         ; (3)
        jmp 0,y                         ; (4)

;;
;; Call sequence (10 bytes, 14 cycles):
;;
;;      pshb                            ; (2)
;;      ldab #page                      ; (2)
;;      ldy  #func                      ; (4)
;;      jsr __call_a32                  ; (6)
;;
;; Call trampoline (87 bytes, 57 cycles):
;;
__call_a32:
        pshx                            ; (4)
        psha                            ; (2)
        ;; <Read current page in A>     ; (3) ldaa _current_page
        psha                            ; (2)
        ;; <Set current page from B>    ; (4) staa _current_page
        tsx                             ; (3)
        ldab    6,x                     ; (4) Restore function parameter
        ldaa    5,x                     ; (4) Move PC return at good place
        staa    6,x                     ; (4)
        ldaa    4,x                     ; (4)
        staa    5,x                     ; (4)
        pula                            ; (3)
        staa    4,x                     ; (4)
        pula                            ; (3)
        pulx                            ; (5)
        jmp     0,y                     ; (4)
#endif
#endif

#ifdef L_return_far
#ifdef mc68hc11
        .sect   .tramp,"ax",@progbits
       .globl __return_void
       .globl __return_16
       .globl __return_32

__return_void:
        ;; pulb
        ;; <Set current page from B> (Board specific)
        ;; rts
__return_16:
        ;; xgdx
        ;; pulb
        ;; <Set current page from B> (Board specific)
        ;; xgdx
        ;; rts
__return_32:
        ;; xgdy
        ;; pulb
        ;; <Set current page from B> (Board specific)
        ;; xgdy
        ;; rts
        ins
        rts
#endif
#endif
.Lend:
;-----------------------------------------
; end required gcclib code
;-----------------------------------------

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.