URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [config/] [mips/] [constraints.md] - Rev 38
Go to most recent revision | Compare with Previous | Blame | View Log
;; Constraint definitions for MIPS.
;; Copyright (C) 2006, 2007 Free Software Foundation, Inc.
;;
;; This file is part of GCC.
;;
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;;
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; <http://www.gnu.org/licenses/>.
;; Register constraints
(define_register_constraint "d" "BASE_REG_CLASS"
"An address register. This is equivalent to @code{r} unless
generating MIPS16 code.")
(define_register_constraint "t" "T_REG"
"@internal")
(define_register_constraint "f" "TARGET_HARD_FLOAT ? FP_REGS : NO_REGS"
"A floating-point register (if available).")
(define_register_constraint "h" "HI_REG"
"The @code{hi} register.")
(define_register_constraint "l" "LO_REG"
"The @code{lo} register.")
(define_register_constraint "x" "MD_REGS"
"The @code{hi} and @code{lo} registers.")
(define_register_constraint "b" "ALL_REGS"
"@internal")
(define_register_constraint "c" "TARGET_ABICALLS ? PIC_FN_ADDR_REG
: TARGET_MIPS16 ? M16_NA_REGS
: GR_REGS"
"A register suitable for use in an indirect jump. This will always be
@code{$25} for @option{-mabicalls}.")
(define_register_constraint "e" "LEA_REGS"
"@internal")
(define_register_constraint "j" "PIC_FN_ADDR_REG"
"@internal")
(define_register_constraint "v" "V1_REG"
"@internal")
(define_register_constraint "y" "GR_REGS"
"Equivalent to @code{r}; retained for backwards compatibility.")
(define_register_constraint "z" "ST_REGS"
"A floating-point condition code register.")
(define_register_constraint "A" "DSP_ACC_REGS"
"@internal")
(define_register_constraint "a" "ACC_REGS"
"@internal")
(define_register_constraint "B" "COP0_REGS"
"@internal")
(define_register_constraint "C" "COP2_REGS"
"@internal")
(define_register_constraint "D" "COP3_REGS"
"@internal")
;; Integer constraints
(define_constraint "I"
"A signed 16-bit constant (for arithmetic instructions)."
(and (match_code "const_int")
(match_test "SMALL_OPERAND (ival)")))
(define_constraint "J"
"Integer zero."
(and (match_code "const_int")
(match_test "ival == 0")))
(define_constraint "K"
"An unsigned 16-bit constant (for logic instructions)."
(and (match_code "const_int")
(match_test "SMALL_OPERAND_UNSIGNED (ival)")))
(define_constraint "L"
"A signed 32-bit constant in which the lower 16 bits are zero.
Such constants can be loaded using @code{lui}."
(and (match_code "const_int")
(match_test "LUI_OPERAND (ival)")))
(define_constraint "M"
"A constant that cannot be loaded using @code{lui}, @code{addiu}
or @code{ori}."
(and (match_code "const_int")
(match_test "!SMALL_OPERAND (ival)")
(match_test "!SMALL_OPERAND_UNSIGNED (ival)")
(match_test "!LUI_OPERAND (ival)")))
(define_constraint "N"
"A constant in the range -65535 to -1 (inclusive)."
(and (match_code "const_int")
(match_test "ival >= -0xffff && ival < 0")))
(define_constraint "O"
"A signed 15-bit constant."
(and (match_code "const_int")
(match_test "ival >= -0x4000 && ival < 0x4000")))
(define_constraint "P"
"A constant in the range 1 to 65535 (inclusive)."
(and (match_code "const_int")
(match_test "ival > 0 && ival < 0x10000")))
;; Floating-point constraints
(define_constraint "G"
"Floating-point zero."
(and (match_code "const_double")
(match_test "op == CONST0_RTX (mode)")))
;; General constraints
(define_constraint "Q"
"@internal"
(match_operand 0 "const_arith_operand"))
(define_memory_constraint "R"
"An address that can be used in a non-macro load or store."
(and (match_code "mem")
(match_test "mips_fetch_insns (op) == 1")))
(define_constraint "S"
"@internal
A constant call address."
(and (match_operand 0 "call_insn_operand")
(match_test "CONSTANT_P (op)")))
(define_constraint "T"
"@internal
A constant @code{move_operand} that cannot be safely loaded into @code{$25}
using @code{la}."
(and (match_operand 0 "move_operand")
(match_test "CONSTANT_P (op)")
(match_test "mips_dangerous_for_la25_p (op)")))
(define_constraint "U"
"@internal
A constant @code{move_operand} that can be safely loaded into @code{$25}
using @code{la}."
(and (match_operand 0 "move_operand")
(match_test "CONSTANT_P (op)")
(match_test "!mips_dangerous_for_la25_p (op)")))
(define_memory_constraint "W"
"@internal
A memory address based on a member of @code{BASE_REG_CLASS}. This is
true for all non-mips16 references (although it can sometimes be implicit
if @samp{!TARGET_EXPLICIT_RELOCS}). For MIPS16, it excludes stack and
constant-pool references."
(and (match_code "mem")
(match_operand 0 "memory_operand")
(ior (match_test "!TARGET_MIPS16")
(and (not (match_operand 0 "stack_operand"))
(not (match_test "CONSTANT_P (XEXP (op, 0))"))))))
(define_constraint "YG"
"@internal
A vector zero."
(and (match_code "const_vector")
(match_test "op == CONST0_RTX (mode)")))
(define_constraint "YA"
"@internal
An unsigned 6-bit constant."
(and (match_code "const_int")
(match_test "UIMM6_OPERAND (ival)")))
(define_constraint "YB"
"@internal
A signed 10-bit constant."
(and (match_code "const_int")
(match_test "IMM10_OPERAND (ival)")))
Go to most recent revision | Compare with Previous | Blame | View Log