URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [config/] [or32/] [or32.c] - Rev 827
Go to most recent revision | Compare with Previous | Blame | View Log
/* Subroutines for insn-output.c for GNU compiler. OpenRISC 1000 version. Copyright (C) 1987, 1992, 1997, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc Contributed by Damjan Lampret <damjanl@bsemi.com> in 1999. Major optimizations by Matjaz Breskvar <matjazb@bsemi.com> in 2005. This file is part of GNU CC. GNU CC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GNU CC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "rtl.h" #include "tree.h" #include "obstack.h" #include "regs.h" #include "hard-reg-set.h" #include "real.h" #include "insn-config.h" #include "conditions.h" #include "output.h" #include "insn-attr.h" #include "flags.h" #include "reload.h" #include "function.h" #include "expr.h" #include "optabs.h" #include "toplev.h" #include "recog.h" #include "ggc.h" #include "except.h" #include "c-pragma.h" #include "integrate.h" #include "tm_p.h" #include "target.h" #include "target-def.h" #include "debug.h" #include "langhooks.h" /* Set thist to nonzero if you want l.nop instruction in delay slot of l.jr instruction in epilogue. */ #define NOP_DELAY_SLOT_FILL 0 /* This is the pseudo register number that holds the comparison flags */ #define FLAGS_REG 32 /* Save information from a "cmpxx" operation until the branch or scc is emitted. */ rtx or32_compare_op0, or32_compare_op1; /* used in function prologue/epilogue generation */ extern int leaf_function; rtx or32_expand_compare (enum rtx_code code, rtx op0, rtx op1); void output_ascii_pseudo_op (FILE *, const unsigned char *, int); /* Local function prototypes */ static bool or32_save_reg_p (int regno); HOST_WIDE_INT or32_compute_frame_size (HOST_WIDE_INT size); static rtx emit_frame_insn (rtx insn); static rtx indexed_memory (rtx base, HOST_WIDE_INT disp); static int or32_emit_int_cmove (rtx dest, rtx op, rtx true_cond, rtx false_cond); static void or32_output_function_prologue (FILE * file, HOST_WIDE_INT vars); #undef TARGET_ASM_FUNCTION_PROLOGUE #define TARGET_ASM_FUNCTION_PROLOGUE or32_output_function_prologue static void or32_output_function_epilogue (FILE * file, HOST_WIDE_INT vars); #undef TARGET_ASM_FUNCTION_EPILOGUE #define TARGET_ASM_FUNCTION_EPILOGUE or32_output_function_epilogue static bool or32_function_ok_for_sibcall (tree decl, tree exp); #undef TARGET_FUNCTION_OK_FOR_SIBCALL #define TARGET_FUNCTION_OK_FOR_SIBCALL or32_function_ok_for_sibcall static bool or32_pass_by_reference (CUMULATIVE_ARGS *, enum machine_mode, tree, bool); #undef TARGET_PASS_BY_REFERENCE #define TARGET_PASS_BY_REFERENCE or32_pass_by_reference static int or32_arg_partial_bytes (CUMULATIVE_ARGS *, enum machine_mode, tree, bool); #undef TARGET_ARG_PARTIAL_BYTES #define TARGET_ARG_PARTIAL_BYTES or32_arg_partial_bytes /* Initialize the GCC target structure. */ /* Define this macro if an argument declared as `char' or `short' in a prototype should actually be passed as an `int'. In addition to avoiding errors in certain cases of mismatch, it also makes for better code on certain machines. */ #undef TARGET_PROMOTE_PROTOTYPES #define TARGET_PROMOTE_PROTOTYPES hook_bool_tree_true /* Define this if function arguments should also be promoted using the above procedure. */ #undef TARGET_PROMOTE_FUNCTION_ARGS #define TARGET_PROMOTE_FUNCTION_ARGS hook_bool_tree_true /* Likewise, if the function return value is promoted. */ #undef TARGET_PROMOTE_FUNCTION_RETURN #define TARGET_PROMOTE_FUNCTION_RETURN hook_bool_tree_true struct gcc_target targetm = TARGET_INITIALIZER; /* Stack layout we use for pushing and poping saved registers */ struct or32_frame_info { bool save_lr_p; int lr_save_offset; bool save_fp_p; int fp_save_offset; int gpr_size; int gpr_offset; int total_size; int vars_size; int args_size; HOST_WIDE_INT mask; }; static struct or32_frame_info frame_info; /* Add a REG_MAYBE_DEAD note to the insn. */ static void or32_maybe_dead (rtx insn) { REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_MAYBE_DEAD, const0_rtx, REG_NOTES (insn)); } int or32_print_operand_punct_valid_p (int code) { switch (code) { case '(': /* idea taken from sparc; output nop for %( if not optimizing or the slot is not filled. */ case '%': return 1; } return 0; } void or32_print_operand_address (FILE * file, register rtx addr) { register rtx reg1, reg2, breg, ireg; rtx offset; switch (GET_CODE (addr)) { case MEM: if (GET_CODE (XEXP (addr, 0)) == REG) fprintf (file, "%s", reg_names[REGNO (addr)]); else abort (); break; case REG: fprintf (file, "0(%s)", reg_names[REGNO (addr)]); break; case PLUS: reg1 = 0; reg2 = 0; ireg = 0; breg = 0; offset = 0; if (GET_CODE (XEXP (addr, 0)) == REG) { offset = XEXP (addr, 1); addr = XEXP (addr, 0); } else if (GET_CODE (XEXP (addr, 1)) == REG) { offset = XEXP (addr, 0); addr = XEXP (addr, 1); } output_address (offset); fprintf (file, "(%s)", reg_names[REGNO (addr)]); break; default: /* fprintf(file, "{%d}", GET_CODE (addr)); */ output_addr_const (file, addr); } } /* Calulcate and return stack size for current function. */ static int calculate_stack_size (int vars, int *lr_save_area, int *fp_save_area, int *gpr_save_area, int *save_area) { int regno; *gpr_save_area = 0; for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) { if (regs_ever_live[regno] && !call_used_regs[regno]) *gpr_save_area += 4; } *lr_save_area = (!current_function_is_leaf || regs_ever_live[LINK_REGNUM]) ? 4 : 0; *fp_save_area = frame_pointer_needed ? 4 : 0; *save_area = (OR32_ALIGN (current_function_outgoing_args_size, 4) + *lr_save_area + *fp_save_area); return (OR32_ALIGN (current_function_outgoing_args_size, 4) + *lr_save_area + *fp_save_area + *gpr_save_area + OR32_ALIGN (vars, 4)); } /* Set up the stack and frame pointer (if desired) for the function. */ static void or32_output_function_prologue (FILE * file, HOST_WIDE_INT vars) { int save_area; int gpr_save_area; int lr_save_area; int fp_save_area; int stack_size; int regno; if (TARGET_MASK_SCHED_LOGUE) return; #if 0 save_area = 0; for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) { if (regs_ever_live[regno] && !call_used_regs[regno]) { save_area += 1; } } if (save_area != 0) fprintf (file, "\tl.nop \t0x%x\n", 0x100 + save_area); return; #endif if (vars < 0) abort (); stack_size = calculate_stack_size (vars, &lr_save_area, &fp_save_area, &gpr_save_area, &save_area); fprintf (file, "\n\t# gpr_save_area %d vars %ld current_function_outgoing_args_size %d\n", gpr_save_area, vars, current_function_outgoing_args_size); if (stack_size >= 0x8000) { fprintf (file, "\tl.movhi \tr%d,hi(%d)\n", GP_ARG_RETURN, stack_size); fprintf (file, "\tl.ori \tr%d,r%d,lo(%d)\n", GP_ARG_RETURN, GP_ARG_RETURN, stack_size); fprintf (file, "\tl.sub \tr%d,r%d,r%d\n", STACK_POINTER_REGNUM, STACK_POINTER_REGNUM, GP_ARG_RETURN); } else if (stack_size > 0) { fprintf (file, "\tl.addi \tr%d,r%d,%d\n", STACK_POINTER_REGNUM, STACK_POINTER_REGNUM, -stack_size); } if (fp_save_area) { fprintf (file, "\tl.sw \t%d(r%d),r%d\n", OR32_ALIGN (current_function_outgoing_args_size, 4) + lr_save_area, STACK_POINTER_REGNUM, FRAME_POINTER_REGNUM); if (stack_size >= 0x8000) fprintf (file, "\tl.add \tr%d,r%d,r%d\n", FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM, GP_ARG_RETURN); else fprintf (file, "\tl.addi \tr%d,r%d,%d\n", FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM, stack_size); } if (lr_save_area) { fprintf (file, "\tl.sw \t%d(r%d),r%d\n", OR32_ALIGN (current_function_outgoing_args_size, 4), STACK_POINTER_REGNUM, LINK_REGNUM); } save_area = (OR32_ALIGN (current_function_outgoing_args_size, 4) + lr_save_area + fp_save_area); for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) { if (regs_ever_live[regno] && !call_used_regs[regno]) { fprintf (file, "\tl.sw \t%d(r%d),r%d\n", save_area, STACK_POINTER_REGNUM, regno); save_area += 4; } } } /* Do any necessary cleanup after a function to restore stack, frame, and regs. */ static void or32_output_function_epilogue (FILE * file, HOST_WIDE_INT vars) { int save_area; int gpr_save_area; int lr_save_area; int fp_save_area; int stack_size; int regno; if (TARGET_MASK_SCHED_LOGUE) return; #if 0 save_area = 0; for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) { if (regs_ever_live[regno] && !call_used_regs[regno]) { save_area += 1; } } fprintf (file, "\tl.nop \t0x%x\n", 0x200 + save_area); return; #endif stack_size = calculate_stack_size (vars, &lr_save_area, &fp_save_area, &gpr_save_area, &save_area); if (lr_save_area) { fprintf (file, "\tl.lwz \tr%d,%d(r%d)\n", LINK_REGNUM, OR32_ALIGN (current_function_outgoing_args_size, 4), STACK_POINTER_REGNUM); } if (fp_save_area) { fprintf (file, "\tl.lwz \tr%d,%d(r%d)\n", FRAME_POINTER_REGNUM, OR32_ALIGN (current_function_outgoing_args_size, 4) + lr_save_area, STACK_POINTER_REGNUM); } save_area = (OR32_ALIGN (current_function_outgoing_args_size, 4) + lr_save_area + fp_save_area); for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) { if (regs_ever_live[regno] && !call_used_regs[regno]) { fprintf (file, "\tl.lwz \tr%d,%d(r%d)\n", regno, save_area, STACK_POINTER_REGNUM); save_area += 4; } } if (stack_size >= 0x8000) { fprintf (file, "\tl.movhi \tr3,hi(%d)\n", stack_size); fprintf (file, "\tl.ori \tr3,r3,lo(%d)\n", stack_size); if (!TARGET_MASK_ALIGNED_JUMPS) fprintf (file, "\tl.jr \tr%d\n", LINK_REGNUM); else fprintf (file, "\t.balignl 0x8,0x15000015,0x4;l.jr \tr%d\n", LINK_REGNUM); fprintf (file, "\tl.add \tr%d,r%d,r3\n", STACK_POINTER_REGNUM, STACK_POINTER_REGNUM); } else if (stack_size > 0) { if (!TARGET_MASK_ALIGNED_JUMPS) fprintf (file, "\tl.jr \tr%d\n", LINK_REGNUM); else fprintf (file, "\t.balignl 0x8,0x15000015,0x4;l.jr \tr%d\n", LINK_REGNUM); fprintf (file, "\tl.addi \tr%d,r%d,%d\n", STACK_POINTER_REGNUM, STACK_POINTER_REGNUM, stack_size); } else { if (!TARGET_MASK_ALIGNED_JUMPS) fprintf (file, "\tl.jr \tr%d\n", LINK_REGNUM); else fprintf (file, "\t.balignl 0x8,0x15000015,0x4;l.jr \tr%d\n", LINK_REGNUM); fprintf (file, "\tl.nop\n"); } #if 0 fprintf (file, ".endproc _%s\n", get_function_name ()); #endif } /* Compuate full frame size and layout. SIZE is the size of the functions local variables. Store information in FRAME_INFO and return total size of stack frame. */ HOST_WIDE_INT or32_compute_frame_size (HOST_WIDE_INT size) { HOST_WIDE_INT args_size; HOST_WIDE_INT vars_size; HOST_WIDE_INT stack_offset; int regno; args_size = current_function_outgoing_args_size; vars_size = OR32_ALIGN (size, 4); frame_info.args_size = args_size; frame_info.vars_size = vars_size; /* If the function has local variables, we're committed to allocating it anyway. Otherwise reclaim it here. */ /* FIXME: Verify this. Got if from the MIPS port. */ if (vars_size == 0 && current_function_is_leaf) args_size = 0; stack_offset = args_size; /* Save link register right after possible outgoing arguments. */ if (or32_save_reg_p (LINK_REGNUM)) { frame_info.lr_save_offset = stack_offset; frame_info.save_lr_p = true; stack_offset = stack_offset + UNITS_PER_WORD; } else frame_info.save_lr_p = false; /* Save frame pointer right after possible link register. */ if (or32_save_reg_p (FRAME_POINTER_REGNUM)) { frame_info.fp_save_offset = stack_offset; frame_info.save_fp_p = true; stack_offset = stack_offset + UNITS_PER_WORD; } else frame_info.save_fp_p = false; frame_info.gpr_size = 0; frame_info.mask = 0; frame_info.gpr_offset = stack_offset; for (regno = 0; regno <= LAST_INT_REG; regno++) { if (regno == LINK_REGNUM || regno == FRAME_POINTER_REGNUM) /* These has already been saved if so needed. */ continue; if (or32_save_reg_p (regno)) { frame_info.gpr_size += UNITS_PER_WORD; frame_info.mask |= (1 << regno); } } frame_info.total_size = ((frame_info.save_fp_p ? UNITS_PER_WORD : 0) + (frame_info.save_lr_p ? UNITS_PER_WORD : 0) + args_size + frame_info.gpr_size + vars_size); return frame_info.total_size; } /* Return true if current function must save REGNO. */ static bool or32_save_reg_p (int regno) { /* No need to save the faked cc0 register. */ if (regno == FLAGS_REG) return false; /* Check call-saved registers. */ if (regs_ever_live[regno] && !call_used_regs[regno]) return true; /* We need to save the old frame pointer before setting up a new one. */ if (regno == FRAME_POINTER_REGNUM && frame_pointer_needed) return true; /* We need to save the incoming return address if it is ever clobbered within the function. */ if (regno == LINK_REGNUM && regs_ever_live[regno]) return true; return false; } /* Emit a frame related insn. Same as emit_insn, but sets RTX_FRAME_RELATED_P to one. */ static rtx emit_frame_insn (rtx insn) { insn = emit_insn (insn); RTX_FRAME_RELATED_P (insn) = 1; return (insn); } static rtx indexed_memory (rtx base, HOST_WIDE_INT disp) { return gen_rtx_MEM (Pmode, gen_rtx_PLUS (Pmode, base, GEN_INT (disp))); } /* Called after register allocation to add any instructions needed for the prologue. Using a prologue insn is favored compared to putting all of the instructions in output_function_prologue(), since it allows the scheduler to intermix instructions with the saves of the caller saved registers. In some cases, it might be necessary to emit a barrier instruction as the last insn to prevent such scheduling. */ void or32_expand_prologue (void) { int total_size = or32_compute_frame_size (get_frame_size ()); rtx sp_rtx; rtx value_rtx; if (!total_size) /* No frame needed. */ return; sp_rtx = gen_rtx_REG (Pmode, STACK_POINTER_REGNUM); if (total_size > 32767) { value_rtx = gen_rtx_REG (Pmode, GP_ARG_RETURN); emit_frame_insn (gen_rtx_SET (Pmode, value_rtx, GEN_INT (total_size))); } else value_rtx = GEN_INT (total_size); /* Update the stack pointer to reflect frame size. */ emit_frame_insn (gen_rtx_SET (Pmode, stack_pointer_rtx, gen_rtx_MINUS (Pmode, stack_pointer_rtx, value_rtx))); if (frame_info.save_fp_p) { emit_frame_insn (gen_rtx_SET (Pmode, indexed_memory (stack_pointer_rtx, frame_info.fp_save_offset), frame_pointer_rtx)); emit_frame_insn (gen_rtx_SET (Pmode, frame_pointer_rtx, gen_rtx_PLUS (Pmode, frame_pointer_rtx, value_rtx))); } if (frame_info.save_lr_p) { emit_frame_insn (gen_rtx_SET (Pmode, indexed_memory (stack_pointer_rtx, frame_info.lr_save_offset), gen_rtx_REG (Pmode, LINK_REGNUM))); } if (frame_info.gpr_size) { int offset = 0; int regno; for (regno = 0; regno <= LAST_INT_REG; regno++) { HOST_WIDE_INT disp = frame_info.gpr_offset + offset; if (!(frame_info.mask & (1 << regno))) continue; emit_frame_insn (gen_rtx_SET (Pmode, indexed_memory (stack_pointer_rtx, disp), gen_rtx_REG (Pmode, regno))); offset = offset + UNITS_PER_WORD; } } } /* Called after register allocation to add any instructions needed for the epilogue. Using an epilogue insn is favored compared to putting all of the instructions in output_function_epilogue(), since it allows the scheduler to intermix instructions with the restores of the caller saved registers. In some cases, it might be necessary to emit a barrier instruction as the first insn to prevent such scheduling. */ void or32_expand_epilogue (int sibcall) { int total_size = or32_compute_frame_size (get_frame_size ()); rtx value_rtx; if (total_size > 32767) { value_rtx = gen_rtx_REG (Pmode, 3); emit_insn (gen_rtx_SET (Pmode, value_rtx, GEN_INT (total_size))); } else value_rtx = GEN_INT (total_size); if (frame_info.save_lr_p) { or32_maybe_dead (emit_insn (gen_rtx_SET (Pmode, gen_rtx_REG (Pmode, LINK_REGNUM), indexed_memory (stack_pointer_rtx, frame_info.lr_save_offset)))); } if (frame_info.save_fp_p) { emit_insn (gen_rtx_SET (Pmode, gen_rtx_REG (Pmode, FRAME_POINTER_REGNUM), indexed_memory (stack_pointer_rtx, frame_info.fp_save_offset))); } if (frame_info.gpr_size) { int offset = 0; int regno; for (regno = 0; regno <= LAST_INT_REG; regno++) { HOST_WIDE_INT disp = frame_info.gpr_offset + offset; if (!(frame_info.mask & (1 << regno))) continue; emit_insn (gen_rtx_SET (Pmode, gen_rtx_REG (Pmode, regno), indexed_memory (stack_pointer_rtx, disp))); offset = offset + UNITS_PER_WORD; } } if (total_size) { emit_insn (gen_rtx_SET (Pmode, stack_pointer_rtx, gen_rtx_PLUS (Pmode, stack_pointer_rtx, value_rtx))); } if (!sibcall) emit_jump_insn (gen_return_internal (gen_rtx_REG( Pmode, 9))); } void or32_print_operand (FILE * file, rtx x, int code) { if (code == 'r' && GET_CODE (x) == MEM && GET_CODE (XEXP (x, 0)) == REG) fprintf (file, "%s", reg_names[REGNO (XEXP (x, 0))]); else if (code == '(') { if (dbr_sequence_length ()) fprintf (file, "\t# delay slot filled"); else fprintf (file, "\n\tl.nop\t\t\t# nop delay slot"); } else if (code == 'C') { switch (GET_CODE (x)) { case EQ: fputs ("eq", file); break; case NE: fputs ("ne", file); break; case GT: fputs ("gts", file); break; case GE: fputs ("ges", file); break; case LT: fputs ("lts", file); break; case LE: fputs ("les", file); break; case GTU: fputs ("gtu", file); break; case GEU: fputs ("geu", file); break; case LTU: fputs ("ltu", file); break; case LEU: fputs ("leu", file); break; default: abort (); } } else if (code == 'H') { if (GET_CODE (x) == REG) fprintf (file, "%s", reg_names[REGNO (x) + 1]); else abort (); } else if (GET_CODE (x) == REG) fprintf (file, "%s", reg_names[REGNO (x)]); else if (GET_CODE (x) == MEM) output_address (XEXP (x, 0)); else output_addr_const (file, x); } /* Generate assembler code for a movdi/movdf */ const char * or32_output_move_double (rtx * operands) { rtx xoperands[3]; switch (GET_CODE (operands[0])) { case REG: if (GET_CODE (operands[1]) == REG) { if (REGNO (operands[0]) == REGNO (operands[1]) + 1) { output_asm_insn ("\tl.or \t%H0, %H1, r0", operands); output_asm_insn ("\tl.or \t%0, %1, r0", operands); return ""; } else { output_asm_insn ("\tl.or \t%0, %1, r0", operands); output_asm_insn ("\tl.or \t%H0, %H1, r0", operands); return ""; } } else if (GET_CODE (operands[1]) == MEM) { xoperands[1] = XEXP (operands[1], 0); if (GET_CODE (xoperands[1]) == REG) { xoperands[0] = operands[0]; if (REGNO (xoperands[0]) == REGNO (xoperands[1])) { output_asm_insn ("\tl.lwz \t%H0, 4(%1)", xoperands); output_asm_insn ("\tl.lwz \t%0, 0(%1)", xoperands); return ""; } else { output_asm_insn ("\tl.lwz \t%0, 0(%1)", xoperands); output_asm_insn ("\tl.lwz \t%H0, 4(%1)", xoperands); return ""; } } else if (GET_CODE (xoperands[1]) == PLUS) { if (GET_CODE (xoperands[2] = XEXP (xoperands[1], 1)) == REG) { xoperands[0] = operands[0]; xoperands[1] = XEXP (xoperands[1], 0); if (REGNO (xoperands[0]) == REGNO (xoperands[2])) { output_asm_insn ("\tl.lwz \t%H0, %1+4(%2)", xoperands); output_asm_insn ("\tl.lwz \t%0, %1(%2)", xoperands); return ""; } else { output_asm_insn ("\tl.lwz \t%0, %1(%2)", xoperands); output_asm_insn ("\tl.lwz \t%H0, %1+4(%2)", xoperands); return ""; } } else if (GET_CODE (xoperands[2] = XEXP (xoperands[1], 0)) == REG) { xoperands[0] = operands[0]; xoperands[1] = XEXP (xoperands[1], 1); if (REGNO (xoperands[0]) == REGNO (xoperands[2])) { output_asm_insn ("\tl.lwz \t%H0, %1+4(%2)", xoperands); output_asm_insn ("\tl.lwz \t%0, %1(%2)", xoperands); return ""; } else { output_asm_insn ("\tl.lwz \t%0, %1(%2)", xoperands); output_asm_insn ("\tl.lwz \t%H0, %1+4(%2)", xoperands); return ""; } } else abort (); } else abort (); } else if (GET_CODE (operands[1]) == CONST_INT) { if (INTVAL (operands[1]) < 0) output_asm_insn ("\tl.addi \t%0, r0, -1", operands); else output_asm_insn ("\tl.or \t%0, r0, r0", operands); output_asm_insn ("\tl.movhi \t%H0, hi(%1)", operands); output_asm_insn ("\tl.ori \t%H0, %H0, lo(%1)", operands); return ""; } else abort (); case MEM: xoperands[0] = XEXP (operands[0], 0); if (GET_CODE (xoperands[0]) == REG) { xoperands[1] = operands[1]; output_asm_insn ("\tl.sw \t0(%0), %1", xoperands); output_asm_insn ("\tl.sw \t4(%0), %H1", xoperands); return ""; } else if (GET_CODE (xoperands[0]) == PLUS) { if (GET_CODE (xoperands[1] = XEXP (xoperands[0], 1)) == REG) { xoperands[0] = XEXP (xoperands[0], 0); xoperands[2] = operands[1]; output_asm_insn ("\tl.sw \t%0(%1), %2", xoperands); output_asm_insn ("\tl.sw \t%0+4(%1), %H2", xoperands); return ""; } else if (GET_CODE (xoperands[1] = XEXP (xoperands[0], 0)) == REG) { xoperands[0] = XEXP (xoperands[0], 1); xoperands[2] = operands[1]; output_asm_insn ("\tl.sw \t%0(%1), %2", xoperands); output_asm_insn ("\tl.sw \t%0+4(%1), %H2", xoperands); return ""; } else abort (); } else abort (); default: abort (); } } enum rtx_code or32_reverse_condition (enum machine_mode mode ATTRIBUTE_UNUSED, enum rtx_code code) { return reverse_condition (code); } enum machine_mode or32_cc_mode (enum rtx_code code, rtx op0 ATTRIBUTE_UNUSED, rtx op1 ATTRIBUTE_UNUSED) { switch (code) { case EQ: return CCEQmode; case NE: return CCNEmode; case GEU: return CCGEUmode; case GTU: return CCGTUmode; case LTU: return CCLTUmode; case LEU: return CCLEUmode; case GE: return CCGEmode; case LT: return CCLTmode; case GT: return CCGTmode; case LE: return CCLEmode; default: abort (); } } /* Generate insn patterns to do an integer compare of OPERANDS. */ static rtx or32_expand_int_compare (enum rtx_code code, rtx op0, rtx op1) { enum machine_mode cmpmode; rtx tmp, flags; cmpmode = SELECT_CC_MODE (code, op0, op1); flags = gen_rtx_REG (cmpmode, FLAGS_REG); /* This is very simple, but making the interface the same as in the FP case makes the rest of the code easier. */ tmp = gen_rtx_COMPARE (cmpmode, op0, op1); emit_insn (gen_rtx_SET (VOIDmode, flags, tmp)); /* Return the test that should be put into the flags user, i.e. the bcc, scc, or cmov instruction. */ return gen_rtx_fmt_ee (code, VOIDmode, flags, const0_rtx); } rtx or32_expand_compare (enum rtx_code code, rtx op0, rtx op1) { return or32_expand_int_compare (code, op0, op1); } void or32_expand_branch (enum rtx_code code, rtx label) { rtx tmp; switch (GET_MODE (or32_compare_op0)) { case SImode: tmp = or32_expand_compare (code, or32_compare_op0, or32_compare_op1); tmp = gen_rtx_IF_THEN_ELSE (VOIDmode, tmp, gen_rtx_LABEL_REF (VOIDmode, label), pc_rtx); emit_jump_insn (gen_rtx_SET (VOIDmode, pc_rtx, tmp)); return; case SFmode: tmp = or32_expand_compare (code, or32_compare_op0, or32_compare_op1); tmp = gen_rtx_IF_THEN_ELSE (VOIDmode, tmp, gen_rtx_LABEL_REF (VOIDmode, label), pc_rtx); emit_jump_insn (gen_rtx_SET (VOIDmode, pc_rtx, tmp)); return; default: abort (); } } static int or32_emit_int_cmove (rtx dest, rtx op, rtx true_cond, rtx false_cond) { rtx condition_rtx, cr; if ((GET_MODE (or32_compare_op0) != SImode) && (GET_MODE (or32_compare_op0) != HImode) && (GET_MODE (or32_compare_op0) != QImode)) return 0; /* We still have to do the compare, because cmov doesn't do a compare, it just looks at the FLAG bit set by a previous compare instruction. */ condition_rtx = or32_expand_compare (GET_CODE (op), or32_compare_op0, or32_compare_op1); cr = XEXP (condition_rtx, 0); emit_insn (gen_cmov (dest, condition_rtx, true_cond, false_cond, cr)); return 1; } /* Emit a conditional move: move TRUE_COND to DEST if OP of the operands of the last comparison is nonzero/true, FALSE_COND if it is zero/false. Return 0 if the hardware has no such operation. */ int or32_emit_cmove (rtx dest, rtx op, rtx true_cond, rtx false_cond) { enum machine_mode result_mode = GET_MODE (dest); if (GET_MODE (true_cond) != result_mode) return 0; if (GET_MODE (false_cond) != result_mode) return 0; /* First, work out if the hardware can do this at all */ return or32_emit_int_cmove (dest, op, true_cond, false_cond); } const char * or32_output_bf (rtx * operands) { enum rtx_code code; enum machine_mode mode_calc, mode_got; code = GET_CODE (operands[1]); mode_calc = SELECT_CC_MODE (code, or32_compare_op0, or32_compare_op1); mode_got = GET_MODE (operands[2]); if (!TARGET_MASK_ALIGNED_JUMPS) { if (mode_calc != mode_got) return "l.bnf \t%l0%("; else return "l.bf \t%l0%("; } else { if (mode_calc != mode_got) return "\t.balignl 0x8,0x15000015,0x4;l.bnf \t%l0%("; else return "\t.balignl 0x8,0x15000015,0x4;l.bf \t%l0%("; } } const char * or32_output_cmov (rtx * operands) { enum rtx_code code; enum machine_mode mode_calc, mode_got; code = GET_CODE (operands[1]); mode_calc = SELECT_CC_MODE (code, or32_compare_op0, or32_compare_op1); mode_got = GET_MODE (operands[4]); if (mode_calc != mode_got) return "l.cmov \t%0,%3,%2"; /* reversed */ else return "l.cmov \t%0,%2,%3"; } /* Any function is ok for sibcall optimization if we allow this optimization */ static bool or32_function_ok_for_sibcall (tree decl ATTRIBUTE_UNUSED, tree exp ATTRIBUTE_UNUSED) { return TARGET_MASK_SIBCALL; } /* All aggregates and arguments greater than 8 bytes are passed this way. */ static bool or32_pass_by_reference (CUMULATIVE_ARGS * cum ATTRIBUTE_UNUSED, enum machine_mode mode ATTRIBUTE_UNUSED, tree type, bool named ATTRIBUTE_UNUSED) { return (type && (AGGREGATE_TYPE_P (type) || int_size_in_bytes (type) > 8)); } static int or32_arg_partial_bytes (CUMULATIVE_ARGS * cum ATTRIBUTE_UNUSED, enum machine_mode mode ATTRIBUTE_UNUSED, tree type ATTRIBUTE_UNUSED, bool named ATTRIBUTE_UNUSED) { return 0; } /* For now this is very simple way for sibcall support */ void or32_expand_sibcall (rtx result ATTRIBUTE_UNUSED, rtx addr, rtx args_size) { emit_call_insn (gen_sibcall_internal (addr, args_size)); } /* We know it can't be done in one insn when we get here, the movsi expander guarantees this. */ void or32_emit_set_const32 (rtx op0, rtx op1) { enum machine_mode mode = GET_MODE (op0); rtx temp; if (GET_CODE (op1) == CONST_INT) { if (CONST_OK_FOR_LETTER_P (INTVAL (op1) & GET_MODE_MASK (mode), 'K') || CONST_OK_FOR_LETTER_P (INTVAL (op1), 'M') || CONST_OK_FOR_LETTER_P (INTVAL (op1), 'I')) abort (); } /* Full 2-insn decomposition is needed. */ if (reload_in_progress || reload_completed) temp = op0; else temp = gen_reg_rtx (mode); if (GET_CODE (op1) == CONST_INT) { /* Emit them as real moves instead of a HIGH/LO_SUM, this way CSE can see everything and reuse intermediate values if it wants. */ emit_insn (gen_rtx_SET (VOIDmode, temp, GEN_INT (INTVAL (op1) & ~(HOST_WIDE_INT) 0xffff))); emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_IOR (mode, temp, GEN_INT (INTVAL (op1) & 0xffff)))); } else { #if 0 /* A symbol, emit in the traditional way. */ emit_insn (gen_rtx_SET (VOIDmode, temp, gen_rtx_HIGH (mode, op1))); emit_insn (gen_rtx_SET (VOIDmode, op0, gen_rtx_LO_SUM (mode, temp, op1))); #else /* since or32 bfd can not deal with relocs that are not of type OR32_CONSTH_RELOC + OR32_CONST_RELOC (ie move high must be followed by exactly one lo_sum) */ emit_insn (gen_movsi_insn_big (op0, op1)); #endif } } /* Functions returning costs and making code size/performance tradeoffs */ int or32_register_move_cost (enum machine_mode mode ATTRIBUTE_UNUSED, enum reg_class from ATTRIBUTE_UNUSED, enum reg_class to ATTRIBUTE_UNUSED) { return 2; } /* A C expressions returning the cost of moving data of MODE from a register to or from memory. */ int or32_memory_move_cost (enum machine_mode mode ATTRIBUTE_UNUSED, enum reg_class class ATTRIBUTE_UNUSED, int in ATTRIBUTE_UNUSED) { return 2; } /* Specify the cost of a branch insn; roughly the number of extra insns that should be added to avoid a branch. Set this to 3 on the or32 since that is roughly the average cost of an unscheduled conditional branch. Cost of 2 and 3 give equal and ~0.7% bigger binaries */ int or32_branch_cost (void) { return 2; } /* Stolen from ../arm/arm.c */ #define MAX_ASCII_LEN 51 void output_ascii_pseudo_op (FILE *stream, const unsigned char *p, int len) { int i; int len_so_far = 0; fputs ("\t.ascii\t\"", stream); for (i = 0; i < len; i++) { int c = p[i]; if (len_so_far >= MAX_ASCII_LEN) { fputs ("\"\n\t.ascii\t\"", stream); len_so_far = 0; } if (ISPRINT (c)) { if (c == '\\' || c == '\"') { putc ('\\', stream); len_so_far++; } putc (c, stream); len_so_far++; } else { fprintf (stream, "\\%03o", c); len_so_far += 4; } } fputs ("\"\n", stream); }
Go to most recent revision | Compare with Previous | Blame | View Log