OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [config/] [v850/] [v850.md] - Rev 856

Go to most recent revision | Compare with Previous | Blame | View Log

;; GCC machine description for NEC V850
;; Copyright (C) 1996, 1997, 1998, 1999, 2002, 2004, 2005, 2007
;; Free Software Foundation, Inc.
;; Contributed by Jeff Law (law@cygnus.com).

;; This file is part of GCC.

;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.

;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3.  If not see
;; <http://www.gnu.org/licenses/>.

;; The original PO technology requires these to be ordered by speed,
;; so that assigner will pick the fastest.

;; See file "rtl.def" for documentation on define_insn, match_*, et. al.

;; The V851 manual states that the instruction address space is 16M;
;; the various branch/call instructions only have a 22bit offset (4M range).
;;
;; One day we'll probably need to handle calls to targets more than 4M
;; away.

;; The size of instructions in bytes.

(define_attr "length" ""
  (const_int 4))

(define_attr "long_calls" "yes,no"
  (const (if_then_else (symbol_ref "TARGET_LONG_CALLS")
                       (const_string "yes")
                       (const_string "no"))))
            
;; Types of instructions (for scheduling purposes).

(define_attr "type" "load,mult,other"
  (const_string "other"))

;; Condition code settings.
;; none - insn does not affect cc
;; none_0hit - insn does not affect cc but it does modify operand 0
;;      This attribute is used to keep track of when operand 0 changes.
;;      See the description of NOTICE_UPDATE_CC for more info.
;; set_znv - sets z,n,v to usable values; c is unknown.
;; set_zn  - sets z,n to usable values; v,c is unknown.
;; compare - compare instruction
;; clobber - value of cc is unknown
(define_attr "cc" "none,none_0hit,set_zn,set_znv,compare,clobber"
  (const_string "clobber"))

;; Function units for the V850.  As best as I can tell, there's
;; a traditional memory load/use stall as well as a stall if
;; the result of a multiply is used too early.

(define_insn_reservation "v850_other" 1
                         (eq_attr "type" "other")
                         "nothing")
(define_insn_reservation "v850_mult" 2
                         (eq_attr "type" "mult")
                         "nothing")
(define_insn_reservation "v850_memory" 2
                         (eq_attr "type" "load")
                         "nothing")

(include "predicates.md")

;; ----------------------------------------------------------------------
;; MOVE INSTRUCTIONS
;; ----------------------------------------------------------------------

;; movqi

(define_expand "movqi"
  [(set (match_operand:QI 0 "general_operand" "")
        (match_operand:QI 1 "general_operand" ""))]
  ""
  "
{
  /* One of the ops has to be in a register or 0 */
  if (!register_operand (operand0, QImode)
      && !reg_or_0_operand (operand1, QImode))
    operands[1] = copy_to_mode_reg (QImode, operand1);
}")

(define_insn "*movqi_internal"
  [(set (match_operand:QI 0 "general_operand" "=r,r,r,Q,r,m,m")
        (match_operand:QI 1 "general_operand" "Jr,n,Q,Ir,m,r,I"))]
  "register_operand (operands[0], QImode)
   || reg_or_0_operand (operands[1], QImode)"
  "* return output_move_single (operands);"
  [(set_attr "length" "2,4,2,2,4,4,4")
   (set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
   (set_attr "type" "other,other,load,other,load,other,other")])

;; movhi

(define_expand "movhi"
  [(set (match_operand:HI 0 "general_operand" "")
        (match_operand:HI 1 "general_operand" ""))]
  ""
  "
{
  /* One of the ops has to be in a register or 0 */
  if (!register_operand (operand0, HImode)
      && !reg_or_0_operand (operand1, HImode))
    operands[1] = copy_to_mode_reg (HImode, operand1);
}")

(define_insn "*movhi_internal"
  [(set (match_operand:HI 0 "general_operand" "=r,r,r,Q,r,m,m")
        (match_operand:HI 1 "general_operand" "Jr,n,Q,Ir,m,r,I"))]
  "register_operand (operands[0], HImode)
   || reg_or_0_operand (operands[1], HImode)"
  "* return output_move_single (operands);"
  [(set_attr "length" "2,4,2,2,4,4,4")
   (set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
   (set_attr "type" "other,other,load,other,load,other,other")])

;; movsi and helpers

(define_insn "*movsi_high"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (high:SI (match_operand 1 "" "")))]
  ""
  "movhi hi(%1),%.,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")
   (set_attr "type" "other")])

(define_insn "*movsi_lo"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (lo_sum:SI (match_operand:SI 1 "register_operand" "r")
                   (match_operand:SI 2 "immediate_operand" "i")))]
  ""
  "movea lo(%2),%1,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")
   (set_attr "type" "other")])

(define_expand "movsi"
  [(set (match_operand:SI 0 "general_operand" "")
        (match_operand:SI 1 "general_operand" ""))]
  ""
  "
{
  /* One of the ops has to be in a register or 0 */
  if (!register_operand (operand0, SImode)
      && !reg_or_0_operand (operand1, SImode))
    operands[1] = copy_to_mode_reg (SImode, operand1);

  /* Some constants, as well as symbolic operands
     must be done with HIGH & LO_SUM patterns.  */
  if (CONSTANT_P (operands[1])
      && GET_CODE (operands[1]) != HIGH
      && ! TARGET_V850E
      && !special_symbolref_operand (operands[1], VOIDmode)
      && !(GET_CODE (operands[1]) == CONST_INT
           && (CONST_OK_FOR_J (INTVAL (operands[1]))
               || CONST_OK_FOR_K (INTVAL (operands[1]))
               || CONST_OK_FOR_L (INTVAL (operands[1])))))
    {
      rtx temp;

      if (reload_in_progress || reload_completed)
        temp = operands[0];
      else
        temp = gen_reg_rtx (SImode);

      emit_insn (gen_rtx_SET (SImode, temp,
                              gen_rtx_HIGH (SImode, operand1)));
      emit_insn (gen_rtx_SET (SImode, operand0,
                              gen_rtx_LO_SUM (SImode, temp, operand1)));
      DONE;
    }
}")

;; This is the same as the following pattern, except that it includes
;; support for arbitrary 32 bit immediates.

;; ??? This always loads addresses using hilo.  If the only use of this address
;; was in a load/store, then we would get smaller code if we only loaded the
;; upper part with hi, and then put the lower part in the load/store insn.

(define_insn "*movsi_internal_v850e"
  [(set (match_operand:SI 0 "general_operand" "=r,r,r,r,Q,r,r,m,m,r")
        (match_operand:SI 1 "general_operand" "Jr,K,L,Q,Ir,m,R,r,I,i"))]
  "TARGET_V850E
   && (register_operand (operands[0], SImode)
       || reg_or_0_operand (operands[1], SImode))"
  "* return output_move_single (operands);"
  [(set_attr "length" "2,4,4,2,2,4,4,4,4,6")
   (set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
   (set_attr "type" "other,other,other,load,other,load,other,other,other,other")])

(define_insn "*movsi_internal"
  [(set (match_operand:SI 0 "general_operand" "=r,r,r,r,Q,r,r,m,m")
        (match_operand:SI 1 "movsi_source_operand" "Jr,K,L,Q,Ir,m,R,r,I"))]
  "register_operand (operands[0], SImode)
   || reg_or_0_operand (operands[1], SImode)"
  "* return output_move_single (operands);"
  [(set_attr "length" "2,4,4,2,2,4,4,4,4")
   (set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
   (set_attr "type" "other,other,other,load,other,load,other,other,other")])



(define_expand "movdi"
  [(set (match_operand:DI 0 "general_operand" "")
        (match_operand:DI 1 "general_operand" ""))]
  ""
  "
{
  /* One of the ops has to be in a register or 0 */
  if (!register_operand (operand0, DImode)
      && !reg_or_0_operand (operand1, DImode))
    operands[1] = copy_to_mode_reg (DImode, operand1);
}")

(define_insn "*movdi_internal"
  [(set (match_operand:DI 0 "general_operand" "=r,r,r,r,r,m,m,r")
        (match_operand:DI 1 "general_operand" "Jr,K,L,i,m,r,IG,iF"))]
  "register_operand (operands[0], DImode)
   || reg_or_0_operand (operands[1], DImode)"
  "* return output_move_double (operands);"
  [(set_attr "length" "4,8,8,16,8,8,8,16")
   (set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
   (set_attr "type" "other,other,other,other,load,other,other,other")])

(define_expand "movsf"
  [(set (match_operand:SF 0 "general_operand" "")
        (match_operand:SF 1 "general_operand" ""))]
  ""
  "
{
  /* One of the ops has to be in a register or 0 */
  if (!register_operand (operand0, SFmode)
      && !reg_or_0_operand (operand1, SFmode))
    operands[1] = copy_to_mode_reg (SFmode, operand1);
}")

(define_insn "*movsf_internal"
  [(set (match_operand:SF 0 "general_operand" "=r,r,r,r,r,Q,r,m,m,r")
        (match_operand:SF 1 "general_operand" "Jr,K,L,n,Q,Ir,m,r,IG,iF"))]
  "register_operand (operands[0], SFmode)
   || reg_or_0_operand (operands[1], SFmode)"
  "* return output_move_single (operands);"
  [(set_attr "length" "2,4,4,8,2,2,4,4,4,8")
   (set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
   (set_attr "type" "other,other,other,other,load,other,load,other,other,other")])

(define_expand "movdf"
  [(set (match_operand:DF 0 "general_operand" "")
        (match_operand:DF 1 "general_operand" ""))]
  ""
  "
{
  /* One of the ops has to be in a register or 0 */
  if (!register_operand (operand0, DFmode)
      && !reg_or_0_operand (operand1, DFmode))
    operands[1] = copy_to_mode_reg (DFmode, operand1);
}")

(define_insn "*movdf_internal"
  [(set (match_operand:DF 0 "general_operand" "=r,r,r,r,r,m,m,r")
        (match_operand:DF 1 "general_operand" "Jr,K,L,i,m,r,IG,iF"))]
  "register_operand (operands[0], DFmode)
   || reg_or_0_operand (operands[1], DFmode)"
  "* return output_move_double (operands);"
  [(set_attr "length" "4,8,8,16,8,8,8,16")
   (set_attr "cc" "none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit")
   (set_attr "type" "other,other,other,other,load,other,other,other")])


;; ----------------------------------------------------------------------
;; TEST INSTRUCTIONS
;; ----------------------------------------------------------------------

(define_insn "*v850_tst1"
  [(set (cc0) (zero_extract:SI (match_operand:QI 0 "memory_operand" "m")
                               (const_int 1)
                               (match_operand:QI 1 "const_int_operand" "n")))]
  ""
  "tst1 %1,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

;; This replaces ld.b;sar;andi with tst1;setf nz.

;; ??? The zero_extract sets the Z bit to the opposite of what one would
;; expect.  This perhaps should be wrapped in a (eq: X (const_int 0)).

(define_split
  [(set (match_operand:SI 0 "register_operand" "")
        (zero_extract:SI (match_operand:QI 1 "memory_operand" "")
                         (const_int 1)
                         (match_operand 2 "const_int_operand" "")))]
  ""
  [(set (cc0) (zero_extract:SI (match_dup 1)
                               (const_int 1)
                               (match_dup 2)))
   (set (match_dup 0) (ne:SI (cc0) (const_int 0)))])

(define_insn "tstsi"
  [(set (cc0) (match_operand:SI 0 "register_operand" "r"))]
  ""
  "cmp %.,%0"
  [(set_attr "length" "2")
   (set_attr "cc" "set_znv")])

(define_insn "cmpsi"
  [(set (cc0)
        (compare (match_operand:SI 0 "register_operand" "r,r")
                 (match_operand:SI 1 "reg_or_int5_operand" "r,J")))]
  ""
  "@
  cmp %1,%0
  cmp %1,%0"
  [(set_attr "length" "2,2")
   (set_attr "cc" "compare")])

;; ----------------------------------------------------------------------
;; ADD INSTRUCTIONS
;; ----------------------------------------------------------------------

(define_insn "addsi3"
  [(set (match_operand:SI 0 "register_operand" "=r,r,r")
        (plus:SI (match_operand:SI 1 "register_operand" "%0,r,r")
                 (match_operand:SI 2 "nonmemory_operand" "rJ,K,U")))]
  ""
  "@
   add %2,%0
   addi %2,%1,%0
   addi %O2(%P2),%1,%0"
  [(set_attr "length" "2,4,4")
   (set_attr "cc" "set_zn,set_zn,set_zn")])

;; ----------------------------------------------------------------------
;; SUBTRACT INSTRUCTIONS
;; ----------------------------------------------------------------------

(define_insn "subsi3"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
        (minus:SI (match_operand:SI 1 "register_operand" "0,r")
                  (match_operand:SI 2 "register_operand" "r,0")))]
  ""
  "@
  sub %2,%0
  subr %1,%0"
  [(set_attr "length" "2,2")
   (set_attr "cc" "set_zn")])

(define_insn "negsi2"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (neg:SI (match_operand:SI 1 "register_operand" "0")))]
  ""
  "subr %.,%0"
  [(set_attr "length" "2")
   (set_attr "cc" "set_zn")])

;; ----------------------------------------------------------------------
;; MULTIPLY INSTRUCTIONS
;; ----------------------------------------------------------------------

(define_expand "mulhisi3"
  [(set (match_operand:SI 0 "register_operand" "")
        (mult:SI
          (sign_extend:SI (match_operand:HI 1 "register_operand" ""))
          (sign_extend:SI (match_operand:HI 2 "nonmemory_operand" ""))))]
  ""
  "if (GET_CODE (operands[2]) == CONST_INT)
     {
       emit_insn (gen_mulhisi3_internal2 (operands[0], operands[1], operands[2]));
       DONE;
     }")

(define_insn "*mulhisi3_internal1"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (mult:SI
          (sign_extend:SI (match_operand:HI 1 "register_operand" "%0"))
          (sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]
  ""
  "mulh %2,%0"
  [(set_attr "length" "2")
   (set_attr "cc" "none_0hit")
   (set_attr "type" "mult")])

(define_insn "mulhisi3_internal2"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
        (mult:SI
          (sign_extend:SI (match_operand:HI 1 "register_operand" "%0,r"))
          (match_operand:HI 2 "const_int_operand" "J,K")))]
  ""
  "@
   mulh %2,%0
   mulhi %2,%1,%0"
  [(set_attr "length" "2,4")
   (set_attr "cc" "none_0hit,none_0hit")
   (set_attr "type" "mult")])

;; ??? The scheduling info is probably wrong.

;; ??? This instruction can also generate the 32 bit highpart, but using it
;; may increase code size counter to the desired result.

;; ??? This instructions can also give a DImode result.

;; ??? There is unsigned version, but it matters only for the DImode/highpart
;; results.

(define_insn "mulsi3"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (mult:SI (match_operand:SI 1 "register_operand" "%0")
                 (match_operand:SI 2 "reg_or_int9_operand" "rO")))]
  "TARGET_V850E"
  "mul %2,%1,%."
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")
   (set_attr "type" "mult")])

;; ----------------------------------------------------------------------
;; DIVIDE INSTRUCTIONS
;; ----------------------------------------------------------------------

;; ??? These insns do set the Z/N condition codes, except that they are based
;; on only one of the two results, so it doesn't seem to make sense to use
;; them.

;; ??? The scheduling info is probably wrong.

(define_insn "divmodsi4"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (div:SI (match_operand:SI 1 "register_operand" "0")
                (match_operand:SI 2 "register_operand" "r")))
   (set (match_operand:SI 3 "register_operand" "=r")
        (mod:SI (match_dup 1)
                (match_dup 2)))]
  "TARGET_V850E"
  "div %2,%0,%3"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")
   (set_attr "type" "other")])
        
(define_insn "udivmodsi4"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (udiv:SI (match_operand:SI 1 "register_operand" "0")
                 (match_operand:SI 2 "register_operand" "r")))
   (set (match_operand:SI 3 "register_operand" "=r")
        (umod:SI (match_dup 1)
                 (match_dup 2)))]
  "TARGET_V850E"
  "divu %2,%0,%3"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")
   (set_attr "type" "other")])
        
;; ??? There is a 2 byte instruction for generating only the quotient.
;; However, it isn't clear how to compute the length field correctly.

(define_insn "divmodhi4"
  [(set (match_operand:HI 0 "register_operand" "=r")
        (div:HI (match_operand:HI 1 "register_operand" "0")
                (match_operand:HI 2 "register_operand" "r")))
   (set (match_operand:HI 3 "register_operand" "=r")
        (mod:HI (match_dup 1)
                (match_dup 2)))]
  "TARGET_V850E"
  "divh %2,%0,%3"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")
   (set_attr "type" "other")])

;; Half-words are sign-extended by default, so we must zero extend to a word
;; here before doing the divide.

(define_insn "udivmodhi4"
  [(set (match_operand:HI 0 "register_operand" "=r")
        (udiv:HI (match_operand:HI 1 "register_operand" "0")
                 (match_operand:HI 2 "register_operand" "r")))
   (set (match_operand:HI 3 "register_operand" "=r")
        (umod:HI (match_dup 1)
                 (match_dup 2)))]
  "TARGET_V850E"
  "zxh %0 ; divhu %2,%0,%3"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")
   (set_attr "type" "other")])

;; ----------------------------------------------------------------------
;; AND INSTRUCTIONS
;; ----------------------------------------------------------------------

(define_insn "*v850_clr1_1"
  [(set (match_operand:QI 0 "memory_operand" "=m")
        (subreg:QI
          (and:SI (subreg:SI (match_dup 0) 0)
                  (match_operand:QI 1 "not_power_of_two_operand" "")) 0))]
  ""
  "*
{
  rtx xoperands[2];
  xoperands[0] = operands[0];
  xoperands[1] = GEN_INT (~INTVAL (operands[1]) & 0xff);
  output_asm_insn (\"clr1 %M1,%0\", xoperands);
  return \"\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_insn "*v850_clr1_2"
  [(set (match_operand:HI 0 "indirect_operand" "=m")
        (subreg:HI
          (and:SI (subreg:SI (match_dup 0) 0)
                  (match_operand:HI 1 "not_power_of_two_operand" "")) 0))]
  ""
  "*
{
  int log2 = exact_log2 (~INTVAL (operands[1]) & 0xffff);

  rtx xoperands[2];
  xoperands[0] = gen_rtx_MEM (QImode,
                              plus_constant (XEXP (operands[0], 0), log2 / 8));
  xoperands[1] = GEN_INT (log2 % 8);
  output_asm_insn (\"clr1 %1,%0\", xoperands);
  return \"\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_insn "*v850_clr1_3"
  [(set (match_operand:SI 0 "indirect_operand" "=m")
        (and:SI (match_dup 0)
                (match_operand:SI 1 "not_power_of_two_operand" "")))]
  ""
  "*
{
  int log2 = exact_log2 (~INTVAL (operands[1]) & 0xffffffff);

  rtx xoperands[2];
  xoperands[0] = gen_rtx_MEM (QImode,
                              plus_constant (XEXP (operands[0], 0), log2 / 8));
  xoperands[1] = GEN_INT (log2 % 8);
  output_asm_insn (\"clr1 %1,%0\", xoperands);
  return \"\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_insn "andsi3"
  [(set (match_operand:SI 0 "register_operand" "=r,r,r")
        (and:SI (match_operand:SI 1 "register_operand" "%0,0,r")
                (match_operand:SI 2 "nonmemory_operand" "r,I,M")))]
  ""
  "@
  and %2,%0
  and %.,%0
  andi %2,%1,%0"
  [(set_attr "length" "2,2,4")
   (set_attr "cc" "set_znv")])

;; ----------------------------------------------------------------------
;; OR INSTRUCTIONS
;; ----------------------------------------------------------------------

(define_insn "*v850_set1_1"
  [(set (match_operand:QI 0 "memory_operand" "=m")
        (subreg:QI (ior:SI (subreg:SI (match_dup 0) 0)
                           (match_operand 1 "power_of_two_operand" "")) 0))]
  ""
  "set1 %M1,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_insn "*v850_set1_2"
  [(set (match_operand:HI 0 "indirect_operand" "=m")
        (subreg:HI (ior:SI (subreg:SI (match_dup 0) 0)
                           (match_operand 1 "power_of_two_operand" "")) 0))]
  ""
  "*
{
  int log2 = exact_log2 (INTVAL (operands[1]));

  if (log2 < 8)
    return \"set1 %M1,%0\";
  else
    {
      rtx xoperands[2];
      xoperands[0] = gen_rtx_MEM (QImode,
                                  plus_constant (XEXP (operands[0], 0),
                                                 log2 / 8));
      xoperands[1] = GEN_INT (log2 % 8);
      output_asm_insn (\"set1 %1,%0\", xoperands);
    }
  return \"\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_insn "*v850_set1_3"
  [(set (match_operand:SI 0 "indirect_operand" "=m")
        (ior:SI (match_dup 0)
                (match_operand 1 "power_of_two_operand" "")))]
  ""
  "*
{
  int log2 = exact_log2 (INTVAL (operands[1]));

  if (log2 < 8)
    return \"set1 %M1,%0\";
  else
    {
      rtx xoperands[2];
      xoperands[0] = gen_rtx_MEM (QImode,
                                  plus_constant (XEXP (operands[0], 0),
                                                 log2 / 8));
      xoperands[1] = GEN_INT (log2 % 8);
      output_asm_insn (\"set1 %1,%0\", xoperands);
    }
  return \"\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_insn "iorsi3"
  [(set (match_operand:SI 0 "register_operand" "=r,r,r")
        (ior:SI (match_operand:SI 1 "register_operand" "%0,0,r")
                (match_operand:SI 2 "nonmemory_operand" "r,I,M")))]
  ""
  "@
  or %2,%0
  or %.,%0
  ori %2,%1,%0"
  [(set_attr "length" "2,2,4")
   (set_attr "cc" "set_znv")])

;; ----------------------------------------------------------------------
;; XOR INSTRUCTIONS
;; ----------------------------------------------------------------------

(define_insn "*v850_not1_1"
  [(set (match_operand:QI 0 "memory_operand" "=m")
        (subreg:QI (xor:SI (subreg:SI (match_dup 0) 0)
                           (match_operand 1 "power_of_two_operand" "")) 0))]
  ""
  "not1 %M1,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_insn "*v850_not1_2"
  [(set (match_operand:HI 0 "indirect_operand" "=m")
        (subreg:HI (xor:SI (subreg:SI (match_dup 0) 0)
                           (match_operand 1 "power_of_two_operand" "")) 0))]
  ""
  "*
{
  int log2 = exact_log2 (INTVAL (operands[1]));

  if (log2 < 8)
    return \"not1 %M1,%0\";
  else
    {
      rtx xoperands[2];
      xoperands[0] = gen_rtx_MEM (QImode,
                                  plus_constant (XEXP (operands[0], 0),
                                                 log2 / 8));
      xoperands[1] = GEN_INT (log2 % 8);
      output_asm_insn (\"not1 %1,%0\", xoperands);
    }
  return \"\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_insn "*v850_not1_3"
  [(set (match_operand:SI 0 "indirect_operand" "=m")
        (xor:SI (match_dup 0)
                (match_operand 1 "power_of_two_operand" "")))]
  ""
  "*
{
  int log2 = exact_log2 (INTVAL (operands[1]));

  if (log2 < 8)
    return \"not1 %M1,%0\";
  else
    {
      rtx xoperands[2];
      xoperands[0] = gen_rtx_MEM (QImode,
                                  plus_constant (XEXP (operands[0], 0),
                                                 log2 / 8));
      xoperands[1] = GEN_INT (log2 % 8);
      output_asm_insn (\"not1 %1,%0\", xoperands);
    }
  return \"\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_insn "xorsi3"
  [(set (match_operand:SI 0 "register_operand" "=r,r,r")
        (xor:SI (match_operand:SI 1 "register_operand" "%0,0,r")
                (match_operand:SI 2 "nonmemory_operand" "r,I,M")))]
  ""
  "@
  xor %2,%0
  xor %.,%0
  xori %2,%1,%0"
  [(set_attr "length" "2,2,4")
   (set_attr "cc" "set_znv")])

;; ----------------------------------------------------------------------
;; NOT INSTRUCTIONS
;; ----------------------------------------------------------------------

(define_insn "one_cmplsi2"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (not:SI (match_operand:SI 1 "register_operand" "r")))]
  ""
  "not %1,%0"
  [(set_attr "length" "2")
   (set_attr "cc" "set_znv")])

;; -----------------------------------------------------------------
;; BIT FIELDS
;; -----------------------------------------------------------------

;; ??? Is it worth defining insv and extv for the V850 series?!?

;; An insv pattern would be useful, but does not get used because
;; store_bit_field never calls insv when storing a constant value into a
;; single-bit bitfield.

;; extv/extzv patterns would be useful, but do not get used because
;; optimize_bitfield_compare in fold-const usually converts single
;; bit extracts into an AND with a mask.

;; -----------------------------------------------------------------
;; Scc INSTRUCTIONS
;; -----------------------------------------------------------------

(define_insn "sle"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (le:SI (cc0) (const_int 0)))]
  ""
  "*
{
  if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0)
    return 0;

  return \"setf le,%0\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

(define_insn "sleu"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (leu:SI (cc0) (const_int 0)))]
  ""
  "setf nh,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

(define_insn "sge"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (ge:SI (cc0) (const_int 0)))]
  ""
  "*
{
  if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0)
    return 0;

  return \"setf ge,%0\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

(define_insn "sgeu"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (geu:SI (cc0) (const_int 0)))]
  ""
  "setf nl,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

(define_insn "slt"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (lt:SI (cc0) (const_int 0)))]
  ""
  "*
{
  if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0)
    return 0;

  return \"setf lt,%0\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

(define_insn "sltu"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (ltu:SI (cc0) (const_int 0)))]
  ""
  "setf l,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

(define_insn "sgt"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (gt:SI (cc0) (const_int 0)))]
  ""
  "*
{
  if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0)
    return 0;

  return \"setf gt,%0\";
}"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

(define_insn "sgtu"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (gtu:SI (cc0) (const_int 0)))]
  ""
  "setf h,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

(define_insn "seq"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (eq:SI (cc0) (const_int 0)))]
  ""
  "setf z,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

(define_insn "sne"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (ne:SI (cc0) (const_int 0)))]
  ""
  "setf nz,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "none_0hit")])

;; ----------------------------------------------------------------------
;; CONDITIONAL MOVE INSTRUCTIONS
;; ----------------------------------------------------------------------

;; Instructions using cc0 aren't allowed to have input reloads, so we must
;; hide the fact that this instruction uses cc0.  We do so by including the
;; compare instruction inside it.

;; ??? This is very ugly.  The right way to do this is to modify cmpsi so
;; that it doesn't emit RTL, and then modify the bcc/scc patterns so that
;; they emit RTL for the compare instruction.  Unfortunately, this requires
;; lots of changes that will be hard to sanitize.  So for now, cmpsi still
;; emits RTL, and I get the compare operands here from the previous insn.

(define_expand "movsicc"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (if_then_else:SI
         (match_operator 1 "comparison_operator"
                         [(match_dup 4) (match_dup 5)])
         (match_operand:SI 2 "reg_or_const_operand" "rJ")
         (match_operand:SI 3 "reg_or_const_operand" "rI")))]
  "TARGET_V850E"
  "
{
  rtx insn = get_last_insn_anywhere ();
  rtx src;

  if (   (GET_CODE (operands[2]) == CONST_INT
       && GET_CODE (operands[3]) == CONST_INT))
    {
      int o2 = INTVAL (operands[2]);
      int o3 = INTVAL (operands[3]);

      if (o2 == 1 && o3 == 0)
        FAIL;   /* setf */
      if (o3 == 1 && o2 == 0)
        FAIL;   /* setf */
      if (o2 == 0 && (o3 < -16 || o3 > 15) && exact_log2 (o3) >= 0)
        FAIL;   /* setf + shift */
      if (o3 == 0 && (o2 < -16 || o2 > 15) && exact_log2 (o2) >=0)
        FAIL;   /* setf + shift */
      if (o2 != 0)
        operands[2] = copy_to_mode_reg (SImode, operands[2]);
      if (o3 !=0 )
        operands[3] = copy_to_mode_reg (SImode, operands[3]);
    }
  else
    {
      if (GET_CODE (operands[2]) != REG)
        operands[2] = copy_to_mode_reg (SImode,operands[2]);
      if (GET_CODE (operands[3]) != REG)
        operands[3] = copy_to_mode_reg (SImode, operands[3]);
    }
  gcc_assert (GET_CODE (insn) == INSN
              && GET_CODE (PATTERN (insn)) == SET
              && SET_DEST (PATTERN (insn)) == cc0_rtx);
    
  src = SET_SRC (PATTERN (insn));

  switch (GET_CODE (src))
    {
    case COMPARE:
      operands[4] = XEXP (src, 0);
      operands[5] = XEXP (src, 1);
      break;

    case REG:
    case SUBREG:
      operands[4] = src;
      operands[5] = const0_rtx;
      break;

    default:
      gcc_unreachable ();
    }
}")

;; ??? Clobbering the condition codes is overkill.

;; ??? We sometimes emit an unnecessary compare instruction because the
;; condition codes may have already been set by an earlier instruction,
;; but we have no code here to avoid the compare if it is unnecessary.

(define_insn "*movsicc_normal"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (if_then_else:SI
         (match_operator 1 "comparison_operator"
                         [(match_operand:SI 4 "register_operand" "r")
                          (match_operand:SI 5 "reg_or_int5_operand" "rJ")])
         (match_operand:SI 2 "reg_or_int5_operand" "rJ")
         (match_operand:SI 3 "reg_or_0_operand" "rI")))]
  "TARGET_V850E"
  "cmp %5,%4 ; cmov %c1,%2,%z3,%0"
  [(set_attr "length" "6")
   (set_attr "cc" "clobber")])

(define_insn "*movsicc_reversed"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (if_then_else:SI
         (match_operator 1 "comparison_operator"
                         [(match_operand:SI 4 "register_operand" "r")
                          (match_operand:SI 5 "reg_or_int5_operand" "rJ")])
         (match_operand:SI 2 "reg_or_0_operand" "rI")
         (match_operand:SI 3 "reg_or_int5_operand" "rJ")))]
  "TARGET_V850E"
  "cmp %5,%4 ; cmov %C1,%3,%z2,%0"
  [(set_attr "length" "6")
   (set_attr "cc" "clobber")])

(define_insn "*movsicc_tst1"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (if_then_else:SI
         (match_operator 1 "comparison_operator"
                         [(zero_extract:SI
                           (match_operand:QI 2 "memory_operand" "m")
                           (const_int 1)
                           (match_operand 3 "const_int_operand" "n"))
                          (const_int 0)])
         (match_operand:SI 4 "reg_or_int5_operand" "rJ")
         (match_operand:SI 5 "reg_or_0_operand" "rI")))]
  "TARGET_V850E"
  "tst1 %3,%2 ; cmov %c1,%4,%z5,%0"
  [(set_attr "length" "8")
   (set_attr "cc" "clobber")])

(define_insn "*movsicc_tst1_reversed"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (if_then_else:SI
         (match_operator 1 "comparison_operator"
                         [(zero_extract:SI
                           (match_operand:QI 2 "memory_operand" "m")
                           (const_int 1)
                           (match_operand 3 "const_int_operand" "n"))
                          (const_int 0)])
         (match_operand:SI 4 "reg_or_0_operand" "rI")
         (match_operand:SI 5 "reg_or_int5_operand" "rJ")))]
  "TARGET_V850E"
  "tst1 %3,%2 ; cmov %C1,%5,%z4,%0"
  [(set_attr "length" "8")
   (set_attr "cc" "clobber")])

;; Matching for sasf requires combining 4 instructions, so we provide a
;; dummy pattern to match the first 3, which will always be turned into the
;; second pattern by subsequent combining.  As above, we must include the
;; comparison to avoid input reloads in an insn using cc0.

(define_insn "*sasf_1"
  [(set (match_operand:SI 0 "register_operand" "")
        (ior:SI (match_operator 1 "comparison_operator" [(cc0) (const_int 0)])
                (ashift:SI (match_operand:SI 2 "register_operand" "")
                           (const_int 1))))]
  "TARGET_V850E"
  "* gcc_unreachable ();")

(define_insn "*sasf_2"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (ior:SI
         (match_operator 1 "comparison_operator"
                         [(match_operand:SI 3 "register_operand" "r")
                          (match_operand:SI 4 "reg_or_int5_operand" "rJ")])
         (ashift:SI (match_operand:SI 2 "register_operand" "0")
                    (const_int 1))))]
  "TARGET_V850E"
  "cmp %4,%3 ; sasf %c1,%0"
  [(set_attr "length" "6")
   (set_attr "cc" "clobber")])

(define_split
  [(set (match_operand:SI 0 "register_operand" "")
        (if_then_else:SI
         (match_operator 1 "comparison_operator"
                         [(match_operand:SI 4 "register_operand" "")
                          (match_operand:SI 5 "reg_or_int5_operand" "")])
         (match_operand:SI 2 "const_int_operand" "")
         (match_operand:SI 3 "const_int_operand" "")))]
  "TARGET_V850E
   && ((INTVAL (operands[2]) ^ INTVAL (operands[3])) == 1)
   && ((INTVAL (operands[2]) + INTVAL (operands[3])) != 1)
   && (GET_CODE (operands[5]) == CONST_INT
      || REGNO (operands[0]) != REGNO (operands[5]))
   && REGNO (operands[0]) != REGNO (operands[4])"
  [(set (match_dup 0) (match_dup 6))
   (set (match_dup 0)
        (ior:SI (match_op_dup 7 [(match_dup 4) (match_dup 5)])
                (ashift:SI (match_dup 0) (const_int 1))))]
  "
{
  operands[6] = GEN_INT (INTVAL (operands[2]) >> 1);
  if (INTVAL (operands[2]) & 0x1)
    operands[7] = operands[1];
  else
    operands[7] = gen_rtx_fmt_ee (reverse_condition (GET_CODE (operands[1])),
                                  GET_MODE (operands[1]),
                                  XEXP (operands[1], 0), XEXP (operands[1], 1));
}")
;; ---------------------------------------------------------------------
;; BYTE SWAP INSTRUCTIONS
;; ---------------------------------------------------------------------

(define_expand "rotlhi3"
  [(set (match_operand:HI 0 "register_operand" "")
        (rotate:HI (match_operand:HI 1 "register_operand" "")
                   (match_operand:HI 2 "const_int_operand" "")))]
  "TARGET_V850E"
  "
{
  if (INTVAL (operands[2]) != 8)
    FAIL;
}")

(define_insn "*rotlhi3_8"
  [(set (match_operand:HI 0 "register_operand" "=r")
        (rotate:HI (match_operand:HI 1 "register_operand" "r")
                   (const_int 8)))]
  "TARGET_V850E"
  "bsh %1,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

(define_expand "rotlsi3"
  [(set (match_operand:SI 0 "register_operand" "")
        (rotate:SI (match_operand:SI 1 "register_operand" "")
                   (match_operand:SI 2 "const_int_operand" "")))]
  "TARGET_V850E"
  "
{
  if (INTVAL (operands[2]) != 16)
    FAIL;
}")

(define_insn "*rotlsi3_16"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (rotate:SI (match_operand:SI 1 "register_operand" "r")
                   (const_int 16)))]
  "TARGET_V850E"
  "hsw %1,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

;; ----------------------------------------------------------------------
;; JUMP INSTRUCTIONS
;; ----------------------------------------------------------------------

;; Conditional jump instructions

(define_expand "ble"
  [(set (pc)
        (if_then_else (le (cc0)
                          (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_expand "bleu"
  [(set (pc)
        (if_then_else (leu (cc0)
                           (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_expand "bge"
  [(set (pc)
        (if_then_else (ge (cc0)
                          (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_expand "bgeu"
  [(set (pc)
        (if_then_else (geu (cc0)
                           (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_expand "blt"
  [(set (pc)
        (if_then_else (lt (cc0)
                          (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_expand "bltu"
  [(set (pc)
        (if_then_else (ltu (cc0)
                           (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_expand "bgt"
  [(set (pc)
        (if_then_else (gt (cc0)
                          (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_expand "bgtu"
  [(set (pc)
        (if_then_else (gtu (cc0)
                           (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_expand "beq"
  [(set (pc)
        (if_then_else (eq (cc0)
                          (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_expand "bne"
  [(set (pc)
        (if_then_else (ne (cc0)
                          (const_int 0))
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "")

(define_insn "*branch_normal"
  [(set (pc)
        (if_then_else (match_operator 1 "comparison_operator"
                                      [(cc0) (const_int 0)])
                      (label_ref (match_operand 0 "" ""))
                      (pc)))]
  ""
  "*
{
  if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0
      && (GET_CODE (operands[1]) == GT
          || GET_CODE (operands[1]) == GE
          || GET_CODE (operands[1]) == LE
          || GET_CODE (operands[1]) == LT))
    return 0;

  if (get_attr_length (insn) == 2)
    return \"b%b1 %l0\";
  else
    return \"b%B1 .+6 ; jr %l0\";
}"
 [(set (attr "length")
    (if_then_else (lt (abs (minus (match_dup 0) (pc)))
                      (const_int 256))
                  (const_int 2)
                  (const_int 6)))
  (set_attr "cc" "none")])

(define_insn "*branch_invert"
  [(set (pc)
        (if_then_else (match_operator 1 "comparison_operator"
                                      [(cc0) (const_int 0)])
                      (pc)
                      (label_ref (match_operand 0 "" ""))))]
  ""
  "*
{
  if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0
      && (GET_CODE (operands[1]) == GT
          || GET_CODE (operands[1]) == GE
          || GET_CODE (operands[1]) == LE
          || GET_CODE (operands[1]) == LT))
    return 0;
  if (get_attr_length (insn) == 2)
    return \"b%B1 %l0\";
  else
    return \"b%b1 .+6 ; jr %l0\";
}"
 [(set (attr "length")
    (if_then_else (lt (abs (minus (match_dup 0) (pc)))
                      (const_int 256))
                  (const_int 2)
                  (const_int 6)))
  (set_attr "cc" "none")])

;; Unconditional and other jump instructions.

(define_insn "jump"
  [(set (pc)
        (label_ref (match_operand 0 "" "")))]
  ""
  "*
{
  if (get_attr_length (insn) == 2)
    return \"br %0\";
  else
    return \"jr %0\";
}"
 [(set (attr "length")
    (if_then_else (lt (abs (minus (match_dup 0) (pc)))
                      (const_int 256))
                  (const_int 2)
                  (const_int 4)))
  (set_attr "cc" "none")])

(define_insn "indirect_jump"
  [(set (pc) (match_operand:SI 0 "register_operand" "r"))]
  ""
  "jmp %0"
  [(set_attr "length" "2")
   (set_attr "cc" "none")])

(define_insn "tablejump"
  [(set (pc) (match_operand:SI 0 "register_operand" "r"))
   (use (label_ref (match_operand 1 "" "")))]
  ""
  "jmp  %0"
  [(set_attr "length" "2")
   (set_attr "cc" "none")])

(define_insn "switch"
  [(set (pc)
        (plus:SI
         (sign_extend:SI
          (mem:HI
           (plus:SI (ashift:SI (match_operand:SI 0 "register_operand" "r")
                               (const_int 1))
                    (label_ref (match_operand 1 "" "")))))
         (label_ref (match_dup 1))))]
  "TARGET_V850E"
  "switch %0"
  [(set_attr "length" "2")
   (set_attr "cc" "none")])

(define_expand "casesi"
  [(match_operand:SI 0 "register_operand" "")
   (match_operand:SI 1 "register_operand" "")
   (match_operand:SI 2 "register_operand" "")
   (match_operand 3 "" "") (match_operand 4 "" "")]
  ""
  "
{
  rtx reg = gen_reg_rtx (SImode);
  rtx tableaddress = gen_reg_rtx (SImode);
  rtx mem;

  /* Subtract the lower bound from the index.  */
  emit_insn (gen_subsi3 (reg, operands[0], operands[1]));
  /* Compare the result against the number of table entries.  */
  emit_insn (gen_cmpsi (reg, operands[2]));
  /* Branch to the default label if out of range of the table.  */
  emit_jump_insn (gen_bgtu (operands[4]));

  /* Disabled because the switch pattern is not being recognized
     properly at the moment.  eg. compiling vfscanf.c in newlib.  */
  if (0 && ! TARGET_BIG_SWITCH && TARGET_V850E)
    {
      emit_jump_insn (gen_switch (reg, operands[3]));
      DONE;
    }

  /* Shift index for the table array access.  */
  emit_insn (gen_ashlsi3 (reg, reg, GEN_INT (TARGET_BIG_SWITCH ? 2 : 1)));
  /* Load the table address into a pseudo.  */
  emit_insn (gen_movsi (tableaddress,
                        gen_rtx_LABEL_REF (Pmode, operands[3])));
  /* Add the table address to the index.  */
  emit_insn (gen_addsi3 (reg, reg, tableaddress));
  /* Load the table entry.  */
  mem = gen_const_mem (CASE_VECTOR_MODE, reg);
  if (! TARGET_BIG_SWITCH)
    {
      rtx reg2 = gen_reg_rtx (HImode);
      emit_insn (gen_movhi (reg2, mem));
      emit_insn (gen_extendhisi2 (reg, reg2));
    }
  else
    emit_insn (gen_movsi (reg, mem));
  /* Add the table address.  */
  emit_insn (gen_addsi3 (reg, reg, tableaddress));
  /* Branch to the switch label.  */
  emit_jump_insn (gen_tablejump (reg, operands[3]));
  DONE;
}")

;; Call subroutine with no return value.

(define_expand "call"
  [(call (match_operand:QI 0 "general_operand" "")
         (match_operand:SI 1 "general_operand" ""))]
  ""
  "
{
  if (! call_address_operand (XEXP (operands[0], 0), QImode)
      || TARGET_LONG_CALLS)
    XEXP (operands[0], 0) = force_reg (SImode, XEXP (operands[0], 0));
  if (TARGET_LONG_CALLS)
    emit_call_insn (gen_call_internal_long (XEXP (operands[0], 0), operands[1]));
  else
    emit_call_insn (gen_call_internal_short (XEXP (operands[0], 0), operands[1]));
  
  DONE;
}")

(define_insn "call_internal_short"
  [(call (mem:QI (match_operand:SI 0 "call_address_operand" "S,r"))
         (match_operand:SI 1 "general_operand" "g,g"))
   (clobber (reg:SI 31))]
  "! TARGET_LONG_CALLS"
  "@
  jarl %0,r31
  jarl .+4,r31 ; add 4,r31 ; jmp %0"
  [(set_attr "length" "4,8")]
)

(define_insn "call_internal_long"
  [(call (mem:QI (match_operand:SI 0 "call_address_operand" "S,r"))
         (match_operand:SI 1 "general_operand" "g,g"))
   (clobber (reg:SI 31))]
  "TARGET_LONG_CALLS"
  "*
  {
  if (which_alternative == 0)
    {
      if (GET_CODE (operands[0]) == REG)
        return \"jarl %0,r31\";
      else
        return \"movhi hi(%0), r0, r11 ; movea lo(%0), r11, r11 ; jarl .+4,r31 ; add 4, r31 ; jmp r11\";
    }
  else
    return \"jarl .+4,r31 ; add 4,r31 ; jmp %0\";
  }"
  [(set_attr "length" "16,8")]
)

;; Call subroutine, returning value in operand 0
;; (which must be a hard register).

(define_expand "call_value"
  [(set (match_operand 0 "" "")
        (call (match_operand:QI 1 "general_operand" "")
              (match_operand:SI 2 "general_operand" "")))]
  ""
  "
{
  if (! call_address_operand (XEXP (operands[1], 0), QImode)
      || TARGET_LONG_CALLS)
    XEXP (operands[1], 0) = force_reg (SImode, XEXP (operands[1], 0));
  if (TARGET_LONG_CALLS)
    emit_call_insn (gen_call_value_internal_long (operands[0],
                                                  XEXP (operands[1], 0),
                                                  operands[2]));
  else
    emit_call_insn (gen_call_value_internal_short (operands[0],
                                                   XEXP (operands[1], 0),
                                                   operands[2]));
  DONE;
}")

(define_insn "call_value_internal_short"
  [(set (match_operand 0 "" "=r,r")
        (call (mem:QI (match_operand:SI 1 "call_address_operand" "S,r"))
              (match_operand:SI 2 "general_operand" "g,g")))
   (clobber (reg:SI 31))]
  "! TARGET_LONG_CALLS"
  "@
  jarl %1,r31
  jarl .+4,r31 ; add 4,r31 ; jmp %1"
  [(set_attr "length" "4,8")]
)

(define_insn "call_value_internal_long"
  [(set (match_operand 0 "" "=r,r")
        (call (mem:QI (match_operand:SI 1 "call_address_operand" "S,r"))
              (match_operand:SI 2 "general_operand" "g,g")))
   (clobber (reg:SI 31))]
  "TARGET_LONG_CALLS"
  "*
  {
  if (which_alternative == 0)
    {
      if (GET_CODE (operands[1]) == REG)
        return \"jarl %1, r31\";
      else
      /* Reload can generate this pattern....  */
        return \"movhi hi(%1), r0, r11 ; movea lo(%1), r11, r11 ; jarl .+4, r31 ; add 4, r31 ; jmp r11\";
    }
  else
    return \"jarl .+4, r31 ; add 4, r31 ; jmp %1\";
  }"
  [(set_attr "length" "16,8")]
)

(define_insn "nop"
  [(const_int 0)]
  ""
  "nop"
  [(set_attr "length" "2")
   (set_attr "cc" "none")])

;; ----------------------------------------------------------------------
;; EXTEND INSTRUCTIONS
;; ----------------------------------------------------------------------

(define_insn ""
  [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
        (zero_extend:SI
         (match_operand:HI 1 "nonimmediate_operand" "0,r,T,m")))]
  "TARGET_V850E"
  "@
   zxh %0
   andi 65535,%1,%0
   sld.hu %1,%0
   ld.hu %1,%0"
  [(set_attr "length" "2,4,2,4")
   (set_attr "cc" "none_0hit,set_znv,none_0hit,none_0hit")])

(define_insn "zero_extendhisi2"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (zero_extend:SI
         (match_operand:HI 1 "register_operand" "r")))]
  ""
  "andi 65535,%1,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "set_znv")])

(define_insn ""
  [(set (match_operand:SI 0 "register_operand" "=r,r,r,r")
        (zero_extend:SI
         (match_operand:QI 1 "nonimmediate_operand" "0,r,T,m")))]
  "TARGET_V850E"
  "@
   zxb %0
   andi 255,%1,%0
   sld.bu %1,%0
   ld.bu %1,%0"
  [(set_attr "length" "2,4,2,4")
   (set_attr "cc" "none_0hit,set_znv,none_0hit,none_0hit")])

(define_insn "zero_extendqisi2"
  [(set (match_operand:SI 0 "register_operand" "=r")
        (zero_extend:SI
         (match_operand:QI 1 "register_operand" "r")))]
  ""
  "andi 255,%1,%0"
  [(set_attr "length" "4")
   (set_attr "cc" "set_znv")])

;;- sign extension instructions

;; ??? The extendhisi2 pattern should not emit shifts for v850e?

(define_insn "*extendhisi_insn"
  [(set (match_operand:SI 0 "register_operand" "=r,r,r")
        (sign_extend:SI (match_operand:HI 1 "nonimmediate_operand" "0,Q,m")))]
  "TARGET_V850E"
  "@
   sxh %0
   sld.h %1,%0
   ld.h %1,%0"
  [(set_attr "length" "2,2,4")
   (set_attr "cc" "none_0hit,none_0hit,none_0hit")])

;; ??? This is missing a sign extend from memory pattern to match the ld.h
;; instruction.

(define_expand "extendhisi2"
  [(set (match_dup 2)
        (ashift:SI (match_operand:HI 1 "register_operand" "")
                   (const_int 16)))
   (set (match_operand:SI 0 "register_operand" "")
       (ashiftrt:SI (match_dup 2)
                     (const_int 16)))]
  ""
  "
{
  operands[1] = gen_lowpart (SImode, operands[1]);
  operands[2] = gen_reg_rtx (SImode);
}")

;; ??? The extendqisi2 pattern should not emit shifts for v850e?

(define_insn "*extendqisi_insn"
  [(set (match_operand:SI 0 "register_operand" "=r,r,r")
        (sign_extend:SI (match_operand:QI 1 "nonimmediate_operand" "0,Q,m")))]
  "TARGET_V850E"
  "@
   sxb %0
   sld.b %1,%0
   ld.b %1,%0"
  [(set_attr "length" "2,2,4")
   (set_attr "cc" "none_0hit,none_0hit,none_0hit")])

;; ??? This is missing a sign extend from memory pattern to match the ld.b
;; instruction.

(define_expand "extendqisi2"
  [(set (match_dup 2)
        (ashift:SI (match_operand:QI 1 "register_operand" "")
                   (const_int 24)))
   (set (match_operand:SI 0 "register_operand" "")
        (ashiftrt:SI (match_dup 2)
                     (const_int 24)))]
  ""
  "
{
  operands[1] = gen_lowpart (SImode, operands[1]);
  operands[2] = gen_reg_rtx (SImode);
}")

;; ----------------------------------------------------------------------
;; SHIFTS
;; ----------------------------------------------------------------------

(define_insn "ashlsi3"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
        (ashift:SI
         (match_operand:SI 1 "register_operand" "0,0")
         (match_operand:SI 2 "nonmemory_operand" "r,N")))]
  ""
  "@
  shl %2,%0
  shl %2,%0"
  [(set_attr "length" "4,2")
   (set_attr "cc" "set_znv")])

(define_insn "lshrsi3"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
        (lshiftrt:SI
         (match_operand:SI 1 "register_operand" "0,0")
         (match_operand:SI 2 "nonmemory_operand" "r,N")))]
  ""
  "@
  shr %2,%0
  shr %2,%0"
  [(set_attr "length" "4,2")
   (set_attr "cc" "set_znv")])

(define_insn "ashrsi3"
  [(set (match_operand:SI 0 "register_operand" "=r,r")
        (ashiftrt:SI
         (match_operand:SI 1 "register_operand" "0,0")
         (match_operand:SI 2 "nonmemory_operand" "r,N")))]
  ""
  "@
  sar %2,%0
  sar %2,%0"
  [(set_attr "length" "4,2")
   (set_attr "cc" "set_znv")])

;; ----------------------------------------------------------------------
;; PROLOGUE/EPILOGUE
;; ----------------------------------------------------------------------
(define_expand "prologue"
  [(const_int 0)]
  ""
  "expand_prologue (); DONE;")

(define_expand "epilogue"
  [(return)]
  ""
  "
{
  /* Try to use the trivial return first.  Else use the
     full epilogue.  */
  if (0)
    emit_jump_insn (gen_return ());
  else
    expand_epilogue ();
  DONE;
}")

(define_insn "return"
  [(return)]
  "reload_completed && compute_frame_size (get_frame_size (), (long *)0) == 0"
  "jmp [r31]"
  [(set_attr "length" "2")
   (set_attr "cc" "none")])

(define_insn "return_internal"
  [(return)
   (use (reg:SI 31))]
  ""
  "jmp [r31]"
  [(set_attr "length" "2")
   (set_attr "cc" "none")])



;; ----------------------------------------------------------------------
;; HELPER INSTRUCTIONS for saving the prologue and epilog registers
;; ----------------------------------------------------------------------

;; This pattern will match a stack adjust RTX followed by any number of push
;; RTXs.  These RTXs will then be turned into a suitable call to a worker
;; function.

;;
;; Actually, convert the RTXs into a PREPARE instruction.
;;
(define_insn ""
 [(match_parallel 0 "pattern_is_ok_for_prepare"
   [(set (reg:SI 3)
         (plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
    (set (mem:SI (plus:SI (reg:SI 3)
                          (match_operand:SI 2 "immediate_operand" "i")))
         (match_operand:SI 3 "register_is_ok_for_epilogue" "r"))])]
 "TARGET_PROLOG_FUNCTION && TARGET_V850E"
 "* return construct_prepare_instruction (operands[0]);
 "
 [(set_attr "length" "4")
  (set_attr "cc"     "none")])

(define_insn ""
 [(match_parallel 0 "pattern_is_ok_for_prologue"
   [(set (reg:SI 3)
         (plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
    (set (mem:SI (plus:SI (reg:SI 3)
                           (match_operand:SI 2 "immediate_operand" "i")))
         (match_operand:SI 3 "register_is_ok_for_epilogue" "r"))])]
 "TARGET_PROLOG_FUNCTION && TARGET_V850"
 "* return construct_save_jarl (operands[0]);
 "
 [(set (attr "length") (if_then_else (eq_attr "long_calls" "yes")
                                     (const_string "16")
                                     (const_string "4")))
  (set_attr "cc"     "clobber")])

;;
;; Actually, turn the RTXs into a DISPOSE instruction.
;;
(define_insn ""
 [(match_parallel 0 "pattern_is_ok_for_dispose"
   [(return)
    (set (reg:SI 3)
         (plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
    (set (match_operand:SI 2 "register_is_ok_for_epilogue" "=r")
         (mem:SI (plus:SI (reg:SI 3)
                          (match_operand:SI 3 "immediate_operand" "i"))))])]
 "TARGET_PROLOG_FUNCTION && TARGET_V850E"
 "* return construct_dispose_instruction (operands[0]);
 "
 [(set_attr "length" "4")
  (set_attr "cc"     "none")])

;; This pattern will match a return RTX followed by any number of pop RTXs
;; and possible a stack adjustment as well.  These RTXs will be turned into
;; a suitable call to a worker function.

(define_insn ""
[(match_parallel 0 "pattern_is_ok_for_epilogue"
   [(return)
    (set (reg:SI 3)
         (plus:SI (reg:SI 3) (match_operand:SI 1 "immediate_operand" "i")))
    (set (match_operand:SI 2 "register_is_ok_for_epilogue" "=r")
         (mem:SI (plus:SI (reg:SI 3)
                          (match_operand:SI 3 "immediate_operand" "i"))))])]
 "TARGET_PROLOG_FUNCTION && TARGET_V850"
 "* return construct_restore_jr (operands[0]);
 "
 [(set (attr "length") (if_then_else (eq_attr "long_calls" "yes")
                                     (const_string "12")
                                     (const_string "4")))
  (set_attr "cc"     "clobber")])

;; Initialize an interrupt function.  Do not depend on TARGET_PROLOG_FUNCTION.
(define_insn "callt_save_interrupt"
  [(unspec_volatile [(const_int 0)] 2)]
    "TARGET_V850E && !TARGET_DISABLE_CALLT"
    ;; The CALLT instruction stores the next address of CALLT to CTPC register
    ;; without saving its previous value.  So if the interrupt handler
    ;; or its caller could possibly execute the CALLT insn, save_interrupt 
    ;; MUST NOT be called via CALLT.
    "*
{
  output_asm_insn (\"addi -24,   sp, sp\", operands);
  output_asm_insn (\"st.w r10,   12[sp]\", operands);
  output_asm_insn (\"stsr ctpc,  r10\",    operands);
  output_asm_insn (\"st.w r10,   16[sp]\", operands);
  output_asm_insn (\"stsr ctpsw, r10\",    operands);
  output_asm_insn (\"st.w r10,   20[sp]\", operands);
  output_asm_insn (\"callt ctoff(__callt_save_interrupt)\", operands);
  return \"\";
}"
   [(set_attr "length" "26")
    (set_attr "cc" "none")])

(define_insn "callt_return_interrupt"
  [(unspec_volatile [(const_int 0)] 3)]
  "TARGET_V850E && !TARGET_DISABLE_CALLT"
  "callt ctoff(__callt_return_interrupt)"
  [(set_attr "length" "2")
   (set_attr "cc" "clobber")])

(define_insn "save_interrupt"
  [(set (reg:SI 3) (plus:SI (reg:SI 3) (const_int -16)))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int -16))) (reg:SI 30))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int -12))) (reg:SI 4))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int  -8))) (reg:SI 1))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int  -4))) (reg:SI 10))]
  ""
  "*
{
  if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
    return \"add -16,sp\;st.w r10,12[sp]\;jarl __save_interrupt,r10\";
  else
    {
      output_asm_insn (\"add   -16, sp\", operands);
      output_asm_insn (\"st.w  r10, 12[sp]\", operands);
      output_asm_insn (\"st.w  ep, 0[sp]\", operands);
      output_asm_insn (\"st.w  gp, 4[sp]\", operands);
      output_asm_insn (\"st.w  r1, 8[sp]\", operands);
      output_asm_insn (\"movhi hi(__ep), r0, ep\", operands);
      output_asm_insn (\"movea lo(__ep), ep, ep\", operands);
      output_asm_insn (\"movhi hi(__gp), r0, gp\", operands);
      output_asm_insn (\"movea lo(__gp), gp, gp\", operands);
      return \"\";
    }
}"
  [(set (attr "length")
        (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
                       (const_int 10)
                       (const_int 34)))
   (set_attr "cc" "clobber")])
  
;; Restore r1, r4, r10, and return from the interrupt
(define_insn "return_interrupt"
  [(return)
   (set (reg:SI 3)  (plus:SI (reg:SI 3) (const_int 16)))
   (set (reg:SI 10) (mem:SI (plus:SI (reg:SI 3) (const_int 12))))
   (set (reg:SI 1)  (mem:SI (plus:SI (reg:SI 3) (const_int  8))))
   (set (reg:SI 4)  (mem:SI (plus:SI (reg:SI 3) (const_int  4))))
   (set (reg:SI 30) (mem:SI (reg:SI 3)))]
  ""
  "*
{
  if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
    return \"jr __return_interrupt\";
  else 
    {
      output_asm_insn (\"ld.w 0[sp],  ep\",   operands);
      output_asm_insn (\"ld.w 4[sp],  gp\",   operands);
      output_asm_insn (\"ld.w 8[sp],  r1\",   operands);
      output_asm_insn (\"ld.w 12[sp], r10\", operands);
      output_asm_insn (\"addi 16, sp, sp\",   operands);
      output_asm_insn (\"reti\",            operands);
      return \"\";
    }
}"
  [(set (attr "length")
        (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
                       (const_int 4)
                       (const_int 24)))
   (set_attr "cc" "clobber")])

;; Save all registers except for the registers saved in save_interrupt when
;; an interrupt function makes a call.
;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
;; all of memory.  This blocks insns from being moved across this point.
;; This is needed because the rest of the compiler is not ready to handle
;; insns this complicated.

(define_insn "callt_save_all_interrupt"
  [(unspec_volatile [(const_int 0)] 0)]
  "TARGET_V850E && !TARGET_DISABLE_CALLT"
  "callt ctoff(__callt_save_all_interrupt)"
  [(set_attr "length" "2")
   (set_attr "cc" "none")])

(define_insn "save_all_interrupt"
  [(unspec_volatile [(const_int 0)] 0)]
  ""
  "*
{
  if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
    return \"jarl __save_all_interrupt,r10\";

  output_asm_insn (\"addi -120, sp, sp\", operands);

  if (TARGET_EP)
    {
      output_asm_insn (\"mov ep, r1\", operands);
      output_asm_insn (\"mov sp, ep\", operands);
      output_asm_insn (\"sst.w r31, 116[ep]\", operands);
      output_asm_insn (\"sst.w r2,  112[ep]\", operands);
      output_asm_insn (\"sst.w gp,  108[ep]\", operands);
      output_asm_insn (\"sst.w r6,  104[ep]\", operands);
      output_asm_insn (\"sst.w r7,  100[ep]\", operands);
      output_asm_insn (\"sst.w r8,   96[ep]\", operands);
      output_asm_insn (\"sst.w r9,   92[ep]\", operands);
      output_asm_insn (\"sst.w r11,  88[ep]\", operands);
      output_asm_insn (\"sst.w r12,  84[ep]\", operands);
      output_asm_insn (\"sst.w r13,  80[ep]\", operands);
      output_asm_insn (\"sst.w r14,  76[ep]\", operands);
      output_asm_insn (\"sst.w r15,  72[ep]\", operands);
      output_asm_insn (\"sst.w r16,  68[ep]\", operands);
      output_asm_insn (\"sst.w r17,  64[ep]\", operands);
      output_asm_insn (\"sst.w r18,  60[ep]\", operands);
      output_asm_insn (\"sst.w r19,  56[ep]\", operands);
      output_asm_insn (\"sst.w r20,  52[ep]\", operands);
      output_asm_insn (\"sst.w r21,  48[ep]\", operands);
      output_asm_insn (\"sst.w r22,  44[ep]\", operands);
      output_asm_insn (\"sst.w r23,  40[ep]\", operands);
      output_asm_insn (\"sst.w r24,  36[ep]\", operands);
      output_asm_insn (\"sst.w r25,  32[ep]\", operands);
      output_asm_insn (\"sst.w r26,  28[ep]\", operands);
      output_asm_insn (\"sst.w r27,  24[ep]\", operands);
      output_asm_insn (\"sst.w r28,  20[ep]\", operands);
      output_asm_insn (\"sst.w r29,  16[ep]\", operands);
      output_asm_insn (\"mov   r1,   ep\", operands);
    }
  else
    {
      output_asm_insn (\"st.w r31, 116[sp]\", operands);
      output_asm_insn (\"st.w r2,  112[sp]\", operands);
      output_asm_insn (\"st.w gp,  108[sp]\", operands);
      output_asm_insn (\"st.w r6,  104[sp]\", operands);
      output_asm_insn (\"st.w r7,  100[sp]\", operands);
      output_asm_insn (\"st.w r8,   96[sp]\", operands);
      output_asm_insn (\"st.w r9,   92[sp]\", operands);
      output_asm_insn (\"st.w r11,  88[sp]\", operands);
      output_asm_insn (\"st.w r12,  84[sp]\", operands);
      output_asm_insn (\"st.w r13,  80[sp]\", operands);
      output_asm_insn (\"st.w r14,  76[sp]\", operands);
      output_asm_insn (\"st.w r15,  72[sp]\", operands);
      output_asm_insn (\"st.w r16,  68[sp]\", operands);
      output_asm_insn (\"st.w r17,  64[sp]\", operands);
      output_asm_insn (\"st.w r18,  60[sp]\", operands);
      output_asm_insn (\"st.w r19,  56[sp]\", operands);
      output_asm_insn (\"st.w r20,  52[sp]\", operands);
      output_asm_insn (\"st.w r21,  48[sp]\", operands);
      output_asm_insn (\"st.w r22,  44[sp]\", operands);
      output_asm_insn (\"st.w r23,  40[sp]\", operands);
      output_asm_insn (\"st.w r24,  36[sp]\", operands);
      output_asm_insn (\"st.w r25,  32[sp]\", operands);
      output_asm_insn (\"st.w r26,  28[sp]\", operands);
      output_asm_insn (\"st.w r27,  24[sp]\", operands);
      output_asm_insn (\"st.w r28,  20[sp]\", operands);
      output_asm_insn (\"st.w r29,  16[sp]\", operands);
    }
    
  return \"\";
}"
  [(set (attr "length")
        (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
                       (const_int 4)
                       (const_int 62)
        ))
   (set_attr "cc" "clobber")])

(define_insn "_save_all_interrupt"
  [(unspec_volatile [(const_int 0)] 0)]
  "TARGET_V850 && ! TARGET_LONG_CALLS"
  "jarl __save_all_interrupt,r10"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

;; Restore all registers saved when an interrupt function makes a call.
;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
;; all of memory.  This blocks insns from being moved across this point.
;; This is needed because the rest of the compiler is not ready to handle
;; insns this complicated.

(define_insn "callt_restore_all_interrupt"
  [(unspec_volatile [(const_int 0)] 1)]
  "TARGET_V850E && !TARGET_DISABLE_CALLT"
  "callt ctoff(__callt_restore_all_interrupt)"
  [(set_attr "length" "2")
   (set_attr "cc" "none")])

(define_insn "restore_all_interrupt"
  [(unspec_volatile [(const_int 0)] 1)]
  ""
  "*
{
  if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS)
    return \"jarl __restore_all_interrupt,r10\";

  if (TARGET_EP)
    {
      output_asm_insn (\"mov   ep,      r1\", operands);
      output_asm_insn (\"mov   sp,      ep\", operands);
      output_asm_insn (\"sld.w 116[ep], r31\", operands);
      output_asm_insn (\"sld.w 112[ep], r2\", operands);
      output_asm_insn (\"sld.w 108[ep], gp\", operands);
      output_asm_insn (\"sld.w 104[ep], r6\", operands);
      output_asm_insn (\"sld.w 100[ep], r7\", operands);
      output_asm_insn (\"sld.w 96[ep],  r8\", operands);
      output_asm_insn (\"sld.w 92[ep],  r9\", operands);
      output_asm_insn (\"sld.w 88[ep],  r11\", operands);
      output_asm_insn (\"sld.w 84[ep],  r12\", operands);
      output_asm_insn (\"sld.w 80[ep],  r13\", operands);
      output_asm_insn (\"sld.w 76[ep],  r14\", operands);
      output_asm_insn (\"sld.w 72[ep],  r15\", operands);
      output_asm_insn (\"sld.w 68[ep],  r16\", operands);
      output_asm_insn (\"sld.w 64[ep],  r17\", operands);
      output_asm_insn (\"sld.w 60[ep],  r18\", operands);
      output_asm_insn (\"sld.w 56[ep],  r19\", operands);
      output_asm_insn (\"sld.w 52[ep],  r20\", operands);
      output_asm_insn (\"sld.w 48[ep],  r21\", operands);
      output_asm_insn (\"sld.w 44[ep],  r22\", operands);
      output_asm_insn (\"sld.w 40[ep],  r23\", operands);
      output_asm_insn (\"sld.w 36[ep],  r24\", operands);
      output_asm_insn (\"sld.w 32[ep],  r25\", operands);
      output_asm_insn (\"sld.w 28[ep],  r26\", operands);
      output_asm_insn (\"sld.w 24[ep],  r27\", operands);
      output_asm_insn (\"sld.w 20[ep],  r28\", operands);
      output_asm_insn (\"sld.w 16[ep],  r29\", operands);
      output_asm_insn (\"mov   r1,      ep\", operands);
    }
  else
    {
      output_asm_insn (\"ld.w 116[sp], r31\", operands);
      output_asm_insn (\"ld.w 112[sp], r2\", operands);
      output_asm_insn (\"ld.w 108[sp], gp\", operands);
      output_asm_insn (\"ld.w 104[sp], r6\", operands);
      output_asm_insn (\"ld.w 100[sp], r7\", operands);
      output_asm_insn (\"ld.w 96[sp],  r8\", operands);
      output_asm_insn (\"ld.w 92[sp],  r9\", operands);
      output_asm_insn (\"ld.w 88[sp],  r11\", operands);
      output_asm_insn (\"ld.w 84[sp],  r12\", operands);
      output_asm_insn (\"ld.w 80[sp],  r13\", operands);
      output_asm_insn (\"ld.w 76[sp],  r14\", operands);
      output_asm_insn (\"ld.w 72[sp],  r15\", operands);
      output_asm_insn (\"ld.w 68[sp],  r16\", operands);
      output_asm_insn (\"ld.w 64[sp],  r17\", operands);
      output_asm_insn (\"ld.w 60[sp],  r18\", operands);
      output_asm_insn (\"ld.w 56[sp],  r19\", operands);
      output_asm_insn (\"ld.w 52[sp],  r20\", operands);
      output_asm_insn (\"ld.w 48[sp],  r21\", operands);
      output_asm_insn (\"ld.w 44[sp],  r22\", operands);
      output_asm_insn (\"ld.w 40[sp],  r23\", operands);
      output_asm_insn (\"ld.w 36[sp],  r24\", operands);
      output_asm_insn (\"ld.w 32[sp],  r25\", operands);
      output_asm_insn (\"ld.w 28[sp],  r26\", operands);
      output_asm_insn (\"ld.w 24[sp],  r27\", operands);
      output_asm_insn (\"ld.w 20[sp],  r28\", operands);
      output_asm_insn (\"ld.w 16[sp],  r29\", operands);
    }
  output_asm_insn (\"addi  120, sp, sp\", operands);
  return \"\";
}"
  [(set (attr "length")
        (if_then_else (ne (symbol_ref "TARGET_LONG_CALLS") (const_int 0))
                       (const_int 4)
                       (const_int 62)
        ))
   (set_attr "cc" "clobber")])

(define_insn "_restore_all_interrupt"
  [(unspec_volatile [(const_int 0)] 1)]
  "TARGET_V850 && ! TARGET_LONG_CALLS"
  "jarl __restore_all_interrupt,r10"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

;; Save r6-r9 for a variable argument function
(define_insn "save_r6_r9_v850e"
  [(set (mem:SI (reg:SI 3)) (reg:SI 6))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int 4))) (reg:SI 7))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int 8))) (reg:SI 8))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int 12))) (reg:SI 9))
  ]
  "TARGET_PROLOG_FUNCTION && TARGET_V850E && !TARGET_DISABLE_CALLT"
  "callt ctoff(__callt_save_r6_r9)"
  [(set_attr "length" "2")
   (set_attr "cc" "none")])

(define_insn "save_r6_r9"
  [(set (mem:SI (reg:SI 3)) (reg:SI 6))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int 4))) (reg:SI 7))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int 8))) (reg:SI 8))
   (set (mem:SI (plus:SI (reg:SI 3) (const_int 12))) (reg:SI 9))
   (clobber (reg:SI 10))]
  "TARGET_PROLOG_FUNCTION && ! TARGET_LONG_CALLS"
  "jarl __save_r6_r9,r10"
  [(set_attr "length" "4")
   (set_attr "cc" "clobber")])

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.