URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [explow.c] - Rev 816
Compare with Previous | Blame | View Log
/* Subroutines for manipulating rtx's in semantically interesting ways. Copyright (C) 1987, 1991, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "toplev.h" #include "rtl.h" #include "tree.h" #include "tm_p.h" #include "flags.h" #include "function.h" #include "expr.h" #include "optabs.h" #include "hard-reg-set.h" #include "insn-config.h" #include "ggc.h" #include "recog.h" #include "langhooks.h" #include "target.h" #include "output.h" static rtx break_out_memory_refs (rtx); static void emit_stack_probe (rtx); /* Truncate and perhaps sign-extend C as appropriate for MODE. */ HOST_WIDE_INT trunc_int_for_mode (HOST_WIDE_INT c, enum machine_mode mode) { int width = GET_MODE_BITSIZE (mode); /* You want to truncate to a _what_? */ gcc_assert (SCALAR_INT_MODE_P (mode)); /* Canonicalize BImode to 0 and STORE_FLAG_VALUE. */ if (mode == BImode) return c & 1 ? STORE_FLAG_VALUE : 0; /* Sign-extend for the requested mode. */ if (width < HOST_BITS_PER_WIDE_INT) { HOST_WIDE_INT sign = 1; sign <<= width - 1; c &= (sign << 1) - 1; c ^= sign; c -= sign; } return c; } /* Return an rtx for the sum of X and the integer C. */ rtx plus_constant (rtx x, HOST_WIDE_INT c) { RTX_CODE code; rtx y; enum machine_mode mode; rtx tem; int all_constant = 0; if (c == 0) return x; restart: code = GET_CODE (x); mode = GET_MODE (x); y = x; switch (code) { case CONST_INT: return GEN_INT (INTVAL (x) + c); case CONST_DOUBLE: { unsigned HOST_WIDE_INT l1 = CONST_DOUBLE_LOW (x); HOST_WIDE_INT h1 = CONST_DOUBLE_HIGH (x); unsigned HOST_WIDE_INT l2 = c; HOST_WIDE_INT h2 = c < 0 ? ~0 : 0; unsigned HOST_WIDE_INT lv; HOST_WIDE_INT hv; add_double (l1, h1, l2, h2, &lv, &hv); return immed_double_const (lv, hv, VOIDmode); } case MEM: /* If this is a reference to the constant pool, try replacing it with a reference to a new constant. If the resulting address isn't valid, don't return it because we have no way to validize it. */ if (GET_CODE (XEXP (x, 0)) == SYMBOL_REF && CONSTANT_POOL_ADDRESS_P (XEXP (x, 0))) { tem = force_const_mem (GET_MODE (x), plus_constant (get_pool_constant (XEXP (x, 0)), c)); if (memory_address_p (GET_MODE (tem), XEXP (tem, 0))) return tem; } break; case CONST: /* If adding to something entirely constant, set a flag so that we can add a CONST around the result. */ x = XEXP (x, 0); all_constant = 1; goto restart; case SYMBOL_REF: case LABEL_REF: all_constant = 1; break; case PLUS: /* The interesting case is adding the integer to a sum. Look for constant term in the sum and combine with C. For an integer constant term, we make a combined integer. For a constant term that is not an explicit integer, we cannot really combine, but group them together anyway. Restart or use a recursive call in case the remaining operand is something that we handle specially, such as a SYMBOL_REF. We may not immediately return from the recursive call here, lest all_constant gets lost. */ if (GET_CODE (XEXP (x, 1)) == CONST_INT) { c += INTVAL (XEXP (x, 1)); if (GET_MODE (x) != VOIDmode) c = trunc_int_for_mode (c, GET_MODE (x)); x = XEXP (x, 0); goto restart; } else if (CONSTANT_P (XEXP (x, 1))) { x = gen_rtx_PLUS (mode, XEXP (x, 0), plus_constant (XEXP (x, 1), c)); c = 0; } else if (find_constant_term_loc (&y)) { /* We need to be careful since X may be shared and we can't modify it in place. */ rtx copy = copy_rtx (x); rtx *const_loc = find_constant_term_loc (©); *const_loc = plus_constant (*const_loc, c); x = copy; c = 0; } break; default: break; } if (c != 0) x = gen_rtx_PLUS (mode, x, GEN_INT (c)); if (GET_CODE (x) == SYMBOL_REF || GET_CODE (x) == LABEL_REF) return x; else if (all_constant) return gen_rtx_CONST (mode, x); else return x; } /* If X is a sum, return a new sum like X but lacking any constant terms. Add all the removed constant terms into *CONSTPTR. X itself is not altered. The result != X if and only if it is not isomorphic to X. */ rtx eliminate_constant_term (rtx x, rtx *constptr) { rtx x0, x1; rtx tem; if (GET_CODE (x) != PLUS) return x; /* First handle constants appearing at this level explicitly. */ if (GET_CODE (XEXP (x, 1)) == CONST_INT && 0 != (tem = simplify_binary_operation (PLUS, GET_MODE (x), *constptr, XEXP (x, 1))) && GET_CODE (tem) == CONST_INT) { *constptr = tem; return eliminate_constant_term (XEXP (x, 0), constptr); } tem = const0_rtx; x0 = eliminate_constant_term (XEXP (x, 0), &tem); x1 = eliminate_constant_term (XEXP (x, 1), &tem); if ((x1 != XEXP (x, 1) || x0 != XEXP (x, 0)) && 0 != (tem = simplify_binary_operation (PLUS, GET_MODE (x), *constptr, tem)) && GET_CODE (tem) == CONST_INT) { *constptr = tem; return gen_rtx_PLUS (GET_MODE (x), x0, x1); } return x; } /* Return an rtx for the size in bytes of the value of EXP. */ rtx expr_size (tree exp) { tree size; if (TREE_CODE (exp) == WITH_SIZE_EXPR) size = TREE_OPERAND (exp, 1); else size = SUBSTITUTE_PLACEHOLDER_IN_EXPR (lang_hooks.expr_size (exp), exp); return expand_expr (size, NULL_RTX, TYPE_MODE (sizetype), 0); } /* Return a wide integer for the size in bytes of the value of EXP, or -1 if the size can vary or is larger than an integer. */ HOST_WIDE_INT int_expr_size (tree exp) { tree size; if (TREE_CODE (exp) == WITH_SIZE_EXPR) size = TREE_OPERAND (exp, 1); else size = lang_hooks.expr_size (exp); if (size == 0 || !host_integerp (size, 0)) return -1; return tree_low_cst (size, 0); } /* Return a copy of X in which all memory references and all constants that involve symbol refs have been replaced with new temporary registers. Also emit code to load the memory locations and constants into those registers. If X contains no such constants or memory references, X itself (not a copy) is returned. If a constant is found in the address that is not a legitimate constant in an insn, it is left alone in the hope that it might be valid in the address. X may contain no arithmetic except addition, subtraction and multiplication. Values returned by expand_expr with 1 for sum_ok fit this constraint. */ static rtx break_out_memory_refs (rtx x) { if (MEM_P (x) || (CONSTANT_P (x) && CONSTANT_ADDRESS_P (x) && GET_MODE (x) != VOIDmode)) x = force_reg (GET_MODE (x), x); else if (GET_CODE (x) == PLUS || GET_CODE (x) == MINUS || GET_CODE (x) == MULT) { rtx op0 = break_out_memory_refs (XEXP (x, 0)); rtx op1 = break_out_memory_refs (XEXP (x, 1)); if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1)) x = gen_rtx_fmt_ee (GET_CODE (x), Pmode, op0, op1); } return x; } /* Given X, a memory address in ptr_mode, convert it to an address in Pmode, or vice versa (TO_MODE says which way). We take advantage of the fact that pointers are not allowed to overflow by commuting arithmetic operations over conversions so that address arithmetic insns can be used. */ rtx convert_memory_address (enum machine_mode to_mode ATTRIBUTE_UNUSED, rtx x) { #ifndef POINTERS_EXTEND_UNSIGNED gcc_assert (GET_MODE (x) == to_mode || GET_MODE (x) == VOIDmode); return x; #else /* defined(POINTERS_EXTEND_UNSIGNED) */ enum machine_mode from_mode; rtx temp; enum rtx_code code; /* If X already has the right mode, just return it. */ if (GET_MODE (x) == to_mode) return x; from_mode = to_mode == ptr_mode ? Pmode : ptr_mode; /* Here we handle some special cases. If none of them apply, fall through to the default case. */ switch (GET_CODE (x)) { case CONST_INT: case CONST_DOUBLE: if (GET_MODE_SIZE (to_mode) < GET_MODE_SIZE (from_mode)) code = TRUNCATE; else if (POINTERS_EXTEND_UNSIGNED < 0) break; else if (POINTERS_EXTEND_UNSIGNED > 0) code = ZERO_EXTEND; else code = SIGN_EXTEND; temp = simplify_unary_operation (code, to_mode, x, from_mode); if (temp) return temp; break; case SUBREG: if ((SUBREG_PROMOTED_VAR_P (x) || REG_POINTER (SUBREG_REG (x))) && GET_MODE (SUBREG_REG (x)) == to_mode) return SUBREG_REG (x); break; case LABEL_REF: temp = gen_rtx_LABEL_REF (to_mode, XEXP (x, 0)); LABEL_REF_NONLOCAL_P (temp) = LABEL_REF_NONLOCAL_P (x); return temp; break; case SYMBOL_REF: temp = shallow_copy_rtx (x); PUT_MODE (temp, to_mode); return temp; break; case CONST: return gen_rtx_CONST (to_mode, convert_memory_address (to_mode, XEXP (x, 0))); break; case PLUS: case MULT: /* For addition we can safely permute the conversion and addition operation if one operand is a constant and converting the constant does not change it. We can always safely permute them if we are making the address narrower. */ if (GET_MODE_SIZE (to_mode) < GET_MODE_SIZE (from_mode) || (GET_CODE (x) == PLUS && GET_CODE (XEXP (x, 1)) == CONST_INT && XEXP (x, 1) == convert_memory_address (to_mode, XEXP (x, 1)))) return gen_rtx_fmt_ee (GET_CODE (x), to_mode, convert_memory_address (to_mode, XEXP (x, 0)), XEXP (x, 1)); break; default: break; } return convert_modes (to_mode, from_mode, x, POINTERS_EXTEND_UNSIGNED); #endif /* defined(POINTERS_EXTEND_UNSIGNED) */ } /* Return something equivalent to X but valid as a memory address for something of mode MODE. When X is not itself valid, this works by copying X or subexpressions of it into registers. */ rtx memory_address (enum machine_mode mode, rtx x) { rtx oldx = x; x = convert_memory_address (Pmode, x); /* By passing constant addresses through registers we get a chance to cse them. */ if (! cse_not_expected && CONSTANT_P (x) && CONSTANT_ADDRESS_P (x)) x = force_reg (Pmode, x); /* We get better cse by rejecting indirect addressing at this stage. Let the combiner create indirect addresses where appropriate. For now, generate the code so that the subexpressions useful to share are visible. But not if cse won't be done! */ else { if (! cse_not_expected && !REG_P (x)) x = break_out_memory_refs (x); /* At this point, any valid address is accepted. */ if (memory_address_p (mode, x)) goto win; /* If it was valid before but breaking out memory refs invalidated it, use it the old way. */ if (memory_address_p (mode, oldx)) goto win2; /* Perform machine-dependent transformations on X in certain cases. This is not necessary since the code below can handle all possible cases, but machine-dependent transformations can make better code. */ LEGITIMIZE_ADDRESS (x, oldx, mode, win); /* PLUS and MULT can appear in special ways as the result of attempts to make an address usable for indexing. Usually they are dealt with by calling force_operand, below. But a sum containing constant terms is special if removing them makes the sum a valid address: then we generate that address in a register and index off of it. We do this because it often makes shorter code, and because the addresses thus generated in registers often become common subexpressions. */ if (GET_CODE (x) == PLUS) { rtx constant_term = const0_rtx; rtx y = eliminate_constant_term (x, &constant_term); if (constant_term == const0_rtx || ! memory_address_p (mode, y)) x = force_operand (x, NULL_RTX); else { y = gen_rtx_PLUS (GET_MODE (x), copy_to_reg (y), constant_term); if (! memory_address_p (mode, y)) x = force_operand (x, NULL_RTX); else x = y; } } else if (GET_CODE (x) == MULT || GET_CODE (x) == MINUS) x = force_operand (x, NULL_RTX); /* If we have a register that's an invalid address, it must be a hard reg of the wrong class. Copy it to a pseudo. */ else if (REG_P (x)) x = copy_to_reg (x); /* Last resort: copy the value to a register, since the register is a valid address. */ else x = force_reg (Pmode, x); goto done; win2: x = oldx; win: if (flag_force_addr && ! cse_not_expected && !REG_P (x)) { x = force_operand (x, NULL_RTX); x = force_reg (Pmode, x); } } done: /* If we didn't change the address, we are done. Otherwise, mark a reg as a pointer if we have REG or REG + CONST_INT. */ if (oldx == x) return x; else if (REG_P (x)) mark_reg_pointer (x, BITS_PER_UNIT); else if (GET_CODE (x) == PLUS && REG_P (XEXP (x, 0)) && GET_CODE (XEXP (x, 1)) == CONST_INT) mark_reg_pointer (XEXP (x, 0), BITS_PER_UNIT); /* OLDX may have been the address on a temporary. Update the address to indicate that X is now used. */ update_temp_slot_address (oldx, x); return x; } /* Like `memory_address' but pretend `flag_force_addr' is 0. */ rtx memory_address_noforce (enum machine_mode mode, rtx x) { int ambient_force_addr = flag_force_addr; rtx val; flag_force_addr = 0; val = memory_address (mode, x); flag_force_addr = ambient_force_addr; return val; } /* Convert a mem ref into one with a valid memory address. Pass through anything else unchanged. */ rtx validize_mem (rtx ref) { if (!MEM_P (ref)) return ref; ref = use_anchored_address (ref); if (! (flag_force_addr && CONSTANT_ADDRESS_P (XEXP (ref, 0))) && memory_address_p (GET_MODE (ref), XEXP (ref, 0))) return ref; /* Don't alter REF itself, since that is probably a stack slot. */ return replace_equiv_address (ref, XEXP (ref, 0)); } /* If X is a memory reference to a member of an object block, try rewriting it to use an anchor instead. Return the new memory reference on success and the old one on failure. */ rtx use_anchored_address (rtx x) { rtx base; HOST_WIDE_INT offset; if (!flag_section_anchors) return x; if (!MEM_P (x)) return x; /* Split the address into a base and offset. */ base = XEXP (x, 0); offset = 0; if (GET_CODE (base) == CONST && GET_CODE (XEXP (base, 0)) == PLUS && GET_CODE (XEXP (XEXP (base, 0), 1)) == CONST_INT) { offset += INTVAL (XEXP (XEXP (base, 0), 1)); base = XEXP (XEXP (base, 0), 0); } /* Check whether BASE is suitable for anchors. */ if (GET_CODE (base) != SYMBOL_REF || !SYMBOL_REF_HAS_BLOCK_INFO_P (base) || SYMBOL_REF_ANCHOR_P (base) || SYMBOL_REF_BLOCK (base) == NULL || !targetm.use_anchors_for_symbol_p (base)) return x; /* Decide where BASE is going to be. */ place_block_symbol (base); /* Get the anchor we need to use. */ offset += SYMBOL_REF_BLOCK_OFFSET (base); base = get_section_anchor (SYMBOL_REF_BLOCK (base), offset, SYMBOL_REF_TLS_MODEL (base)); /* Work out the offset from the anchor. */ offset -= SYMBOL_REF_BLOCK_OFFSET (base); /* If we're going to run a CSE pass, force the anchor into a register. We will then be able to reuse registers for several accesses, if the target costs say that that's worthwhile. */ if (!cse_not_expected) base = force_reg (GET_MODE (base), base); return replace_equiv_address (x, plus_constant (base, offset)); } /* Copy the value or contents of X to a new temp reg and return that reg. */ rtx copy_to_reg (rtx x) { rtx temp = gen_reg_rtx (GET_MODE (x)); /* If not an operand, must be an address with PLUS and MULT so do the computation. */ if (! general_operand (x, VOIDmode)) x = force_operand (x, temp); if (x != temp) emit_move_insn (temp, x); return temp; } /* Like copy_to_reg but always give the new register mode Pmode in case X is a constant. */ rtx copy_addr_to_reg (rtx x) { return copy_to_mode_reg (Pmode, x); } /* Like copy_to_reg but always give the new register mode MODE in case X is a constant. */ rtx copy_to_mode_reg (enum machine_mode mode, rtx x) { rtx temp = gen_reg_rtx (mode); /* If not an operand, must be an address with PLUS and MULT so do the computation. */ if (! general_operand (x, VOIDmode)) x = force_operand (x, temp); gcc_assert (GET_MODE (x) == mode || GET_MODE (x) == VOIDmode); if (x != temp) emit_move_insn (temp, x); return temp; } /* Load X into a register if it is not already one. Use mode MODE for the register. X should be valid for mode MODE, but it may be a constant which is valid for all integer modes; that's why caller must specify MODE. The caller must not alter the value in the register we return, since we mark it as a "constant" register. */ rtx force_reg (enum machine_mode mode, rtx x) { rtx temp, insn, set; if (REG_P (x)) return x; if (general_operand (x, mode)) { temp = gen_reg_rtx (mode); insn = emit_move_insn (temp, x); } else { temp = force_operand (x, NULL_RTX); if (REG_P (temp)) insn = get_last_insn (); else { rtx temp2 = gen_reg_rtx (mode); insn = emit_move_insn (temp2, temp); temp = temp2; } } /* Let optimizers know that TEMP's value never changes and that X can be substituted for it. Don't get confused if INSN set something else (such as a SUBREG of TEMP). */ if (CONSTANT_P (x) && (set = single_set (insn)) != 0 && SET_DEST (set) == temp && ! rtx_equal_p (x, SET_SRC (set))) set_unique_reg_note (insn, REG_EQUAL, x); /* Let optimizers know that TEMP is a pointer, and if so, the known alignment of that pointer. */ { unsigned align = 0; if (GET_CODE (x) == SYMBOL_REF) { align = BITS_PER_UNIT; if (SYMBOL_REF_DECL (x) && DECL_P (SYMBOL_REF_DECL (x))) align = DECL_ALIGN (SYMBOL_REF_DECL (x)); } else if (GET_CODE (x) == LABEL_REF) align = BITS_PER_UNIT; else if (GET_CODE (x) == CONST && GET_CODE (XEXP (x, 0)) == PLUS && GET_CODE (XEXP (XEXP (x, 0), 0)) == SYMBOL_REF && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT) { rtx s = XEXP (XEXP (x, 0), 0); rtx c = XEXP (XEXP (x, 0), 1); unsigned sa, ca; sa = BITS_PER_UNIT; if (SYMBOL_REF_DECL (s) && DECL_P (SYMBOL_REF_DECL (s))) sa = DECL_ALIGN (SYMBOL_REF_DECL (s)); ca = exact_log2 (INTVAL (c) & -INTVAL (c)) * BITS_PER_UNIT; align = MIN (sa, ca); } else if (MEM_P (x) && MEM_POINTER (x)) align = MEM_ALIGN (x); if (align) mark_reg_pointer (temp, align); } return temp; } /* If X is a memory ref, copy its contents to a new temp reg and return that reg. Otherwise, return X. */ rtx force_not_mem (rtx x) { rtx temp; if (!MEM_P (x) || GET_MODE (x) == BLKmode) return x; temp = gen_reg_rtx (GET_MODE (x)); if (MEM_POINTER (x)) REG_POINTER (temp) = 1; emit_move_insn (temp, x); return temp; } /* Copy X to TARGET (if it's nonzero and a reg) or to a new temp reg and return that reg. MODE is the mode to use for X in case it is a constant. */ rtx copy_to_suggested_reg (rtx x, rtx target, enum machine_mode mode) { rtx temp; if (target && REG_P (target)) temp = target; else temp = gen_reg_rtx (mode); emit_move_insn (temp, x); return temp; } /* Return the mode to use to store a scalar of TYPE and MODE. PUNSIGNEDP points to the signedness of the type and may be adjusted to show what signedness to use on extension operations. FOR_CALL is nonzero if this call is promoting args for a call. */ #if defined(PROMOTE_MODE) && !defined(PROMOTE_FUNCTION_MODE) #define PROMOTE_FUNCTION_MODE PROMOTE_MODE #endif enum machine_mode promote_mode (tree type, enum machine_mode mode, int *punsignedp, int for_call ATTRIBUTE_UNUSED) { enum tree_code code = TREE_CODE (type); int unsignedp = *punsignedp; #ifndef PROMOTE_MODE if (! for_call) return mode; #endif switch (code) { #ifdef PROMOTE_FUNCTION_MODE case INTEGER_TYPE: case ENUMERAL_TYPE: case BOOLEAN_TYPE: case REAL_TYPE: case OFFSET_TYPE: #ifdef PROMOTE_MODE if (for_call) { #endif PROMOTE_FUNCTION_MODE (mode, unsignedp, type); #ifdef PROMOTE_MODE } else { PROMOTE_MODE (mode, unsignedp, type); } #endif break; #endif #ifdef POINTERS_EXTEND_UNSIGNED case REFERENCE_TYPE: case POINTER_TYPE: mode = Pmode; unsignedp = POINTERS_EXTEND_UNSIGNED; break; #endif default: break; } *punsignedp = unsignedp; return mode; } /* Adjust the stack pointer by ADJUST (an rtx for a number of bytes). This pops when ADJUST is positive. ADJUST need not be constant. */ void adjust_stack (rtx adjust) { rtx temp; if (adjust == const0_rtx) return; /* We expect all variable sized adjustments to be multiple of PREFERRED_STACK_BOUNDARY. */ if (GET_CODE (adjust) == CONST_INT) stack_pointer_delta -= INTVAL (adjust); temp = expand_binop (Pmode, #ifdef STACK_GROWS_DOWNWARD add_optab, #else sub_optab, #endif stack_pointer_rtx, adjust, stack_pointer_rtx, 0, OPTAB_LIB_WIDEN); if (temp != stack_pointer_rtx) emit_move_insn (stack_pointer_rtx, temp); } /* Adjust the stack pointer by minus ADJUST (an rtx for a number of bytes). This pushes when ADJUST is positive. ADJUST need not be constant. */ void anti_adjust_stack (rtx adjust) { rtx temp; if (adjust == const0_rtx) return; /* We expect all variable sized adjustments to be multiple of PREFERRED_STACK_BOUNDARY. */ if (GET_CODE (adjust) == CONST_INT) stack_pointer_delta += INTVAL (adjust); temp = expand_binop (Pmode, #ifdef STACK_GROWS_DOWNWARD sub_optab, #else add_optab, #endif stack_pointer_rtx, adjust, stack_pointer_rtx, 0, OPTAB_LIB_WIDEN); if (temp != stack_pointer_rtx) emit_move_insn (stack_pointer_rtx, temp); } /* Round the size of a block to be pushed up to the boundary required by this machine. SIZE is the desired size, which need not be constant. */ static rtx round_push (rtx size) { int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT; if (align == 1) return size; if (GET_CODE (size) == CONST_INT) { HOST_WIDE_INT new = (INTVAL (size) + align - 1) / align * align; if (INTVAL (size) != new) size = GEN_INT (new); } else { /* CEIL_DIV_EXPR needs to worry about the addition overflowing, but we know it can't. So add ourselves and then do TRUNC_DIV_EXPR. */ size = expand_binop (Pmode, add_optab, size, GEN_INT (align - 1), NULL_RTX, 1, OPTAB_LIB_WIDEN); size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size, GEN_INT (align), NULL_RTX, 1); size = expand_mult (Pmode, size, GEN_INT (align), NULL_RTX, 1); } return size; } /* Save the stack pointer for the purpose in SAVE_LEVEL. PSAVE is a pointer to a previously-created save area. If no save area has been allocated, this function will allocate one. If a save area is specified, it must be of the proper mode. The insns are emitted after insn AFTER, if nonzero, otherwise the insns are emitted at the current position. */ void emit_stack_save (enum save_level save_level, rtx *psave, rtx after) { rtx sa = *psave; /* The default is that we use a move insn and save in a Pmode object. */ rtx (*fcn) (rtx, rtx) = gen_move_insn; enum machine_mode mode = STACK_SAVEAREA_MODE (save_level); /* See if this machine has anything special to do for this kind of save. */ switch (save_level) { #ifdef HAVE_save_stack_block case SAVE_BLOCK: if (HAVE_save_stack_block) fcn = gen_save_stack_block; break; #endif #ifdef HAVE_save_stack_function case SAVE_FUNCTION: if (HAVE_save_stack_function) fcn = gen_save_stack_function; break; #endif #ifdef HAVE_save_stack_nonlocal case SAVE_NONLOCAL: if (HAVE_save_stack_nonlocal) fcn = gen_save_stack_nonlocal; break; #endif default: break; } /* If there is no save area and we have to allocate one, do so. Otherwise verify the save area is the proper mode. */ if (sa == 0) { if (mode != VOIDmode) { if (save_level == SAVE_NONLOCAL) *psave = sa = assign_stack_local (mode, GET_MODE_SIZE (mode), 0); else *psave = sa = gen_reg_rtx (mode); } } if (after) { rtx seq; start_sequence (); do_pending_stack_adjust (); /* We must validize inside the sequence, to ensure that any instructions created by the validize call also get moved to the right place. */ if (sa != 0) sa = validize_mem (sa); emit_insn (fcn (sa, stack_pointer_rtx)); seq = get_insns (); end_sequence (); emit_insn_after (seq, after); } else { do_pending_stack_adjust (); if (sa != 0) sa = validize_mem (sa); emit_insn (fcn (sa, stack_pointer_rtx)); } } /* Restore the stack pointer for the purpose in SAVE_LEVEL. SA is the save area made by emit_stack_save. If it is zero, we have nothing to do. Put any emitted insns after insn AFTER, if nonzero, otherwise at current position. */ void emit_stack_restore (enum save_level save_level, rtx sa, rtx after) { /* The default is that we use a move insn. */ rtx (*fcn) (rtx, rtx) = gen_move_insn; /* See if this machine has anything special to do for this kind of save. */ switch (save_level) { #ifdef HAVE_restore_stack_block case SAVE_BLOCK: if (HAVE_restore_stack_block) fcn = gen_restore_stack_block; break; #endif #ifdef HAVE_restore_stack_function case SAVE_FUNCTION: if (HAVE_restore_stack_function) fcn = gen_restore_stack_function; break; #endif #ifdef HAVE_restore_stack_nonlocal case SAVE_NONLOCAL: if (HAVE_restore_stack_nonlocal) fcn = gen_restore_stack_nonlocal; break; #endif default: break; } if (sa != 0) { sa = validize_mem (sa); /* These clobbers prevent the scheduler from moving references to variable arrays below the code that deletes (pops) the arrays. */ emit_insn (gen_rtx_CLOBBER (VOIDmode, gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (VOIDmode)))); emit_insn (gen_rtx_CLOBBER (VOIDmode, gen_rtx_MEM (BLKmode, stack_pointer_rtx))); } discard_pending_stack_adjust (); if (after) { rtx seq; start_sequence (); emit_insn (fcn (stack_pointer_rtx, sa)); seq = get_insns (); end_sequence (); emit_insn_after (seq, after); } else emit_insn (fcn (stack_pointer_rtx, sa)); } /* Invoke emit_stack_save on the nonlocal_goto_save_area for the current function. This function should be called whenever we allocate or deallocate dynamic stack space. */ void update_nonlocal_goto_save_area (void) { tree t_save; rtx r_save; /* The nonlocal_goto_save_area object is an array of N pointers. The first one is used for the frame pointer save; the rest are sized by STACK_SAVEAREA_MODE. Create a reference to array index 1, the first of the stack save area slots. */ t_save = build4 (ARRAY_REF, ptr_type_node, cfun->nonlocal_goto_save_area, integer_one_node, NULL_TREE, NULL_TREE); r_save = expand_expr (t_save, NULL_RTX, VOIDmode, EXPAND_WRITE); emit_stack_save (SAVE_NONLOCAL, &r_save, NULL_RTX); } /* Return an rtx representing the address of an area of memory dynamically pushed on the stack. This region of memory is always aligned to a multiple of BIGGEST_ALIGNMENT. Any required stack pointer alignment is preserved. SIZE is an rtx representing the size of the area. TARGET is a place in which the address can be placed. KNOWN_ALIGN is the alignment (in bits) that we know SIZE has. */ rtx allocate_dynamic_stack_space (rtx size, rtx target, int known_align) { /* If we're asking for zero bytes, it doesn't matter what we point to since we can't dereference it. But return a reasonable address anyway. */ if (size == const0_rtx) return virtual_stack_dynamic_rtx; /* Otherwise, show we're calling alloca or equivalent. */ current_function_calls_alloca = 1; /* Ensure the size is in the proper mode. */ if (GET_MODE (size) != VOIDmode && GET_MODE (size) != Pmode) size = convert_to_mode (Pmode, size, 1); /* We can't attempt to minimize alignment necessary, because we don't know the final value of preferred_stack_boundary yet while executing this code. */ cfun->preferred_stack_boundary = PREFERRED_STACK_BOUNDARY; /* We will need to ensure that the address we return is aligned to BIGGEST_ALIGNMENT. If STACK_DYNAMIC_OFFSET is defined, we don't always know its final value at this point in the compilation (it might depend on the size of the outgoing parameter lists, for example), so we must align the value to be returned in that case. (Note that STACK_DYNAMIC_OFFSET will have a default nonzero value if STACK_POINTER_OFFSET or ACCUMULATE_OUTGOING_ARGS are defined). We must also do an alignment operation on the returned value if the stack pointer alignment is less strict that BIGGEST_ALIGNMENT. If we have to align, we must leave space in SIZE for the hole that might result from the alignment operation. */ #if defined (STACK_DYNAMIC_OFFSET) || defined (STACK_POINTER_OFFSET) #define MUST_ALIGN 1 #else #define MUST_ALIGN (PREFERRED_STACK_BOUNDARY < BIGGEST_ALIGNMENT) #endif if (MUST_ALIGN) size = force_operand (plus_constant (size, BIGGEST_ALIGNMENT / BITS_PER_UNIT - 1), NULL_RTX); #ifdef SETJMP_VIA_SAVE_AREA /* If setjmp restores regs from a save area in the stack frame, avoid clobbering the reg save area. Note that the offset of virtual_incoming_args_rtx includes the preallocated stack args space. It would be no problem to clobber that, but it's on the wrong side of the old save area. What used to happen is that, since we did not know for sure whether setjmp() was invoked until after RTL generation, we would use reg notes to store the "optimized" size and fix things up later. These days we know this information before we ever start building RTL so the reg notes are unnecessary. */ if (!current_function_calls_setjmp) { int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT; /* ??? Code below assumes that the save area needs maximal alignment. This constraint may be too strong. */ gcc_assert (PREFERRED_STACK_BOUNDARY == BIGGEST_ALIGNMENT); if (GET_CODE (size) == CONST_INT) { HOST_WIDE_INT new = INTVAL (size) / align * align; if (INTVAL (size) != new) size = GEN_INT (new); } else { /* Since we know overflow is not possible, we avoid using CEIL_DIV_EXPR and use TRUNC_DIV_EXPR instead. */ size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size, GEN_INT (align), NULL_RTX, 1); size = expand_mult (Pmode, size, GEN_INT (align), NULL_RTX, 1); } } else { rtx dynamic_offset = expand_binop (Pmode, sub_optab, virtual_stack_dynamic_rtx, stack_pointer_rtx, NULL_RTX, 1, OPTAB_LIB_WIDEN); size = expand_binop (Pmode, add_optab, size, dynamic_offset, NULL_RTX, 1, OPTAB_LIB_WIDEN); } #endif /* SETJMP_VIA_SAVE_AREA */ /* Round the size to a multiple of the required stack alignment. Since the stack if presumed to be rounded before this allocation, this will maintain the required alignment. If the stack grows downward, we could save an insn by subtracting SIZE from the stack pointer and then aligning the stack pointer. The problem with this is that the stack pointer may be unaligned between the execution of the subtraction and alignment insns and some machines do not allow this. Even on those that do, some signal handlers malfunction if a signal should occur between those insns. Since this is an extremely rare event, we have no reliable way of knowing which systems have this problem. So we avoid even momentarily mis-aligning the stack. */ /* If we added a variable amount to SIZE, we can no longer assume it is aligned. */ #if !defined (SETJMP_VIA_SAVE_AREA) if (MUST_ALIGN || known_align % PREFERRED_STACK_BOUNDARY != 0) #endif size = round_push (size); do_pending_stack_adjust (); /* We ought to be called always on the toplevel and stack ought to be aligned properly. */ gcc_assert (!(stack_pointer_delta % (PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT))); /* If needed, check that we have the required amount of stack. Take into account what has already been checked. */ if (flag_stack_check && ! STACK_CHECK_BUILTIN) probe_stack_range (STACK_CHECK_MAX_FRAME_SIZE + STACK_CHECK_PROTECT, size); /* Don't use a TARGET that isn't a pseudo or is the wrong mode. */ if (target == 0 || !REG_P (target) || REGNO (target) < FIRST_PSEUDO_REGISTER || GET_MODE (target) != Pmode) target = gen_reg_rtx (Pmode); mark_reg_pointer (target, known_align); /* Perform the required allocation from the stack. Some systems do this differently than simply incrementing/decrementing from the stack pointer, such as acquiring the space by calling malloc(). */ #ifdef HAVE_allocate_stack if (HAVE_allocate_stack) { enum machine_mode mode = STACK_SIZE_MODE; insn_operand_predicate_fn pred; /* We don't have to check against the predicate for operand 0 since TARGET is known to be a pseudo of the proper mode, which must be valid for the operand. For operand 1, convert to the proper mode and validate. */ if (mode == VOIDmode) mode = insn_data[(int) CODE_FOR_allocate_stack].operand[1].mode; pred = insn_data[(int) CODE_FOR_allocate_stack].operand[1].predicate; if (pred && ! ((*pred) (size, mode))) size = copy_to_mode_reg (mode, convert_to_mode (mode, size, 1)); emit_insn (gen_allocate_stack (target, size)); } else #endif { #ifndef STACK_GROWS_DOWNWARD emit_move_insn (target, virtual_stack_dynamic_rtx); #endif /* Check stack bounds if necessary. */ if (current_function_limit_stack) { rtx available; rtx space_available = gen_label_rtx (); #ifdef STACK_GROWS_DOWNWARD available = expand_binop (Pmode, sub_optab, stack_pointer_rtx, stack_limit_rtx, NULL_RTX, 1, OPTAB_WIDEN); #else available = expand_binop (Pmode, sub_optab, stack_limit_rtx, stack_pointer_rtx, NULL_RTX, 1, OPTAB_WIDEN); #endif emit_cmp_and_jump_insns (available, size, GEU, NULL_RTX, Pmode, 1, space_available); #ifdef HAVE_trap if (HAVE_trap) emit_insn (gen_trap ()); else #endif error ("stack limits not supported on this target"); emit_barrier (); emit_label (space_available); } anti_adjust_stack (size); #ifdef STACK_GROWS_DOWNWARD emit_move_insn (target, virtual_stack_dynamic_rtx); #endif } if (MUST_ALIGN) { /* CEIL_DIV_EXPR needs to worry about the addition overflowing, but we know it can't. So add ourselves and then do TRUNC_DIV_EXPR. */ target = expand_binop (Pmode, add_optab, target, GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT - 1), NULL_RTX, 1, OPTAB_LIB_WIDEN); target = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, target, GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT), NULL_RTX, 1); target = expand_mult (Pmode, target, GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT), NULL_RTX, 1); } /* Record the new stack level for nonlocal gotos. */ if (cfun->nonlocal_goto_save_area != 0) update_nonlocal_goto_save_area (); return target; } /* A front end may want to override GCC's stack checking by providing a run-time routine to call to check the stack, so provide a mechanism for calling that routine. */ static GTY(()) rtx stack_check_libfunc; void set_stack_check_libfunc (rtx libfunc) { stack_check_libfunc = libfunc; } /* Emit one stack probe at ADDRESS, an address within the stack. */ static void emit_stack_probe (rtx address) { rtx memref = gen_rtx_MEM (word_mode, address); MEM_VOLATILE_P (memref) = 1; if (STACK_CHECK_PROBE_LOAD) emit_move_insn (gen_reg_rtx (word_mode), memref); else emit_move_insn (memref, const0_rtx); } /* Probe a range of stack addresses from FIRST to FIRST+SIZE, inclusive. FIRST is a constant and size is a Pmode RTX. These are offsets from the current stack pointer. STACK_GROWS_DOWNWARD says whether to add or subtract from the stack. If SIZE is constant, this is done with a fixed number of probes. Otherwise, we must make a loop. */ #ifdef STACK_GROWS_DOWNWARD #define STACK_GROW_OP MINUS #else #define STACK_GROW_OP PLUS #endif void probe_stack_range (HOST_WIDE_INT first, rtx size) { /* First ensure SIZE is Pmode. */ if (GET_MODE (size) != VOIDmode && GET_MODE (size) != Pmode) size = convert_to_mode (Pmode, size, 1); /* Next see if the front end has set up a function for us to call to check the stack. */ if (stack_check_libfunc != 0) { rtx addr = memory_address (QImode, gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, plus_constant (size, first))); addr = convert_memory_address (ptr_mode, addr); emit_library_call (stack_check_libfunc, LCT_NORMAL, VOIDmode, 1, addr, ptr_mode); } /* Next see if we have an insn to check the stack. Use it if so. */ #ifdef HAVE_check_stack else if (HAVE_check_stack) { insn_operand_predicate_fn pred; rtx last_addr = force_operand (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, plus_constant (size, first)), NULL_RTX); pred = insn_data[(int) CODE_FOR_check_stack].operand[0].predicate; if (pred && ! ((*pred) (last_addr, Pmode))) last_addr = copy_to_mode_reg (Pmode, last_addr); emit_insn (gen_check_stack (last_addr)); } #endif /* If we have to generate explicit probes, see if we have a constant small number of them to generate. If so, that's the easy case. */ else if (GET_CODE (size) == CONST_INT && INTVAL (size) < 10 * STACK_CHECK_PROBE_INTERVAL) { HOST_WIDE_INT offset; /* Start probing at FIRST + N * STACK_CHECK_PROBE_INTERVAL for values of N from 1 until it exceeds LAST. If only one probe is needed, this will not generate any code. Then probe at LAST. */ for (offset = first + STACK_CHECK_PROBE_INTERVAL; offset < INTVAL (size); offset = offset + STACK_CHECK_PROBE_INTERVAL) emit_stack_probe (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, GEN_INT (offset))); emit_stack_probe (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, plus_constant (size, first))); } /* In the variable case, do the same as above, but in a loop. We emit loop notes so that loop optimization can be done. */ else { rtx test_addr = force_operand (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, GEN_INT (first + STACK_CHECK_PROBE_INTERVAL)), NULL_RTX); rtx last_addr = force_operand (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, plus_constant (size, first)), NULL_RTX); rtx incr = GEN_INT (STACK_CHECK_PROBE_INTERVAL); rtx loop_lab = gen_label_rtx (); rtx test_lab = gen_label_rtx (); rtx end_lab = gen_label_rtx (); rtx temp; if (!REG_P (test_addr) || REGNO (test_addr) < FIRST_PSEUDO_REGISTER) test_addr = force_reg (Pmode, test_addr); emit_jump (test_lab); emit_label (loop_lab); emit_stack_probe (test_addr); #ifdef STACK_GROWS_DOWNWARD #define CMP_OPCODE GTU temp = expand_binop (Pmode, sub_optab, test_addr, incr, test_addr, 1, OPTAB_WIDEN); #else #define CMP_OPCODE LTU temp = expand_binop (Pmode, add_optab, test_addr, incr, test_addr, 1, OPTAB_WIDEN); #endif gcc_assert (temp == test_addr); emit_label (test_lab); emit_cmp_and_jump_insns (test_addr, last_addr, CMP_OPCODE, NULL_RTX, Pmode, 1, loop_lab); emit_jump (end_lab); emit_label (end_lab); emit_stack_probe (last_addr); } } /* Return an rtx representing the register or memory location in which a scalar value of data type VALTYPE was returned by a function call to function FUNC. FUNC is a FUNCTION_DECL, FNTYPE a FUNCTION_TYPE node if the precise function is known, otherwise 0. OUTGOING is 1 if on a machine with register windows this function should return the register in which the function will put its result and 0 otherwise. */ rtx hard_function_value (tree valtype, tree func, tree fntype, int outgoing ATTRIBUTE_UNUSED) { rtx val; val = targetm.calls.function_value (valtype, func ? func : fntype, outgoing); if (REG_P (val) && GET_MODE (val) == BLKmode) { unsigned HOST_WIDE_INT bytes = int_size_in_bytes (valtype); enum machine_mode tmpmode; /* int_size_in_bytes can return -1. We don't need a check here since the value of bytes will then be large enough that no mode will match anyway. */ for (tmpmode = GET_CLASS_NARROWEST_MODE (MODE_INT); tmpmode != VOIDmode; tmpmode = GET_MODE_WIDER_MODE (tmpmode)) { /* Have we found a large enough mode? */ if (GET_MODE_SIZE (tmpmode) >= bytes) break; } /* No suitable mode found. */ gcc_assert (tmpmode != VOIDmode); PUT_MODE (val, tmpmode); } return val; } /* Return an rtx representing the register or memory location in which a scalar value of mode MODE was returned by a library call. */ rtx hard_libcall_value (enum machine_mode mode) { return LIBCALL_VALUE (mode); } /* Look up the tree code for a given rtx code to provide the arithmetic operation for REAL_ARITHMETIC. The function returns an int because the caller may not know what `enum tree_code' means. */ int rtx_to_tree_code (enum rtx_code code) { enum tree_code tcode; switch (code) { case PLUS: tcode = PLUS_EXPR; break; case MINUS: tcode = MINUS_EXPR; break; case MULT: tcode = MULT_EXPR; break; case DIV: tcode = RDIV_EXPR; break; case SMIN: tcode = MIN_EXPR; break; case SMAX: tcode = MAX_EXPR; break; default: tcode = LAST_AND_UNUSED_TREE_CODE; break; } return ((int) tcode); } #include "gt-explow.h"