URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [testsuite/] [ada/] [acats/] [tests/] [c4/] [c45531m.dep] - Rev 149
Go to most recent revision | Compare with Previous | Blame | View Log
-- C45531M.DEP
-- Grant of Unlimited Rights
--
-- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
-- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained
-- unlimited rights in the software and documentation contained herein.
-- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making
-- this public release, the Government intends to confer upon all
-- recipients unlimited rights equal to those held by the Government.
-- These rights include rights to use, duplicate, release or disclose the
-- released technical data and computer software in whole or in part, in
-- any manner and for any purpose whatsoever, and to have or permit others
-- to do so.
--
-- DISCLAIMER
--
-- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
-- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED
-- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
-- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE
-- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
-- PARTICULAR PURPOSE OF SAID MATERIAL.
--*
-- OBJECTIVE:
-- CHECK THAT THE OPERATOR "*" PRODUCES CORRECT RESULTS
-- FOR MIXED FIXED POINT AND INTEGER TYPES USING 4 SUBTESTS.
-- THIS TEST REQUIRES MIN_WORD_LENGTH = 48.
-- THIS TEST USES VALUES OF DELTA WHICH ARE LESS THAN 0.5.
--
-- TEST CASES ARE:
-- A) INTEGER * FIXED WHEN ALL VALUES ARE MODEL NUMBERS.
-- B) FIXED * INTEGER WHEN ALL VALUES ARE MODEL NUMBERS.
-- C) INTEGER * FIXED FOR NON-MODEL NUMBERS.
-- D) FIXED * INTEGER FOR NON-MODEL NUMBERS.
--
-- REPEAT FOR MINIMUM REQUIRED WORD LENGTHS OF 12, 16, 32 AND 48,
-- WITH RANGE <, =, AND > THAN 1.0 AND
-- WITH DELTA <, =, AND > THAN 1.0.
-- APPLICABILITY CRITERIA:
-- THIS TEST IS APPLICABLE FOR IMPLEMENTATIONS WHICH HAVE A
-- 'MAX_MANTISSA OF 47 OR GREATER.
-- IF 'MAX_MANTISSA >= 47 IS NOT SUPPORTED THEN THE DECLARATION OF
-- 'TYPE FX_OP5' MUST BE REJECTED.
-- HISTORY:
-- NTW 09/08/86 CREATED ORIGINAL TEST.
-- RJW 11/05/86 REVISED COMMENTS.
-- DHH 01/13/88 ADDED APPLICABILITY CRITERIA AND STANDARD HEADER.
-- BCB 04/27/90 REVISED APPLICABILITY CRITERIA.
WITH REPORT;
PROCEDURE C45531M IS
USE REPORT;
MIN_WORD_LENGTH : CONSTANT := 48;
FULL_SCALE : CONSTANT := 2 ** (MIN_WORD_LENGTH - 1);
FORTH : CONSTANT := FULL_SCALE / 4;
DEL1 : CONSTANT := 0.5 / FULL_SCALE;
DEL4 : CONSTANT := 4.0 * DEL1;
TYPE FX_0P5 IS DELTA DEL1 * 1 RANGE -0.5 .. 0.5 - DEL1 * 1;
-- N/A => ERROR.
TYPE FX_1 IS DELTA DEL1 * 2 RANGE -1.0 .. 1.0 - DEL1 * 2;
TYPE FX_2 IS DELTA DEL1 * 4 RANGE -2.0 .. 2.0 - DEL1 * 4;
BEGIN TEST ("C45531M", "MIXED FIXED POINT AND INTEGER ""*"" "
& "FOR RANGE <, =, > 1.0");
--------------------------------------------------
-- CASE A) INTEGER * FIXED WHEN ALL VALUES ARE MODEL NUMBERS.
A: DECLARE
A : INTEGER := 0;
B : FX_0P5 := 0.0;
RESULT_VALUE : FX_0P5 := 0.0;
LOWEST_ACCEPTABLE_VALUE : FX_0P5 := FX_0P5 (0.375);
HIGHEST_ACCEPTABLE_VALUE : FX_0P5 := FX_0P5 (0.375);
BEGIN
IF EQUAL (3, 3) THEN
A := 3;
B := FX_0P5 (0.125); -- A MODEL NUMBER
END IF;
RESULT_VALUE := A * B;
IF (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)
OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN
FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "
& "FOR INTEGER * FIXED "
& "WHEN ALL VALUES ARE MODEL NUMBERS");
END IF;
END A;
--------------------------------------------------
-- CASE B) FIXED * INTEGER WHEN ALL VALUES ARE MODEL NUMBERS.
B: DECLARE
A : FX_1 := 0.0;
B : INTEGER := 0;
RESULT_VALUE : FX_1 := 0.0;
LOWEST_ACCEPTABLE_VALUE : FX_1 := FX_1 (0.75);
HIGHEST_ACCEPTABLE_VALUE : FX_1 := FX_1 (0.75);
BEGIN
IF EQUAL (3, 3) THEN
A := FX_1 (0.125); -- A MODEL NUMBER
B := 6;
END IF;
RESULT_VALUE := A * B;
IF (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)
OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN
FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "
& "FOR FIXED * INTEGER "
& "WHEN ALL VALUES ARE MODEL NUMBERS");
END IF;
END B;
--------------------------------------------------
-- CASE C) INTEGER * FIXED FOR NON-MODEL NUMBERS.
C: DECLARE
A : INTEGER := 0;
B : FX_2 := 0.0;
RESULT_VALUE : FX_2 := 0.0;
LOW_COUNT : CONSTANT := (3 * (FORTH + 0) );
HIGH_COUNT : CONSTANT := (3 * (FORTH + 1) );
LOWEST_ACCEPTABLE_VALUE : FX_2
:= FX_2 (DEL4 * LOW_COUNT );
HIGHEST_ACCEPTABLE_VALUE : FX_2
:= FX_2 (DEL4 * HIGH_COUNT);
BEGIN
IF EQUAL (3, 3) THEN -- B NOT A MODEL NUMBER
A := 3;
B := FX_2 (DEL4 * FORTH + DEL1 );
END IF;
RESULT_VALUE := A * B;
IF (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)
OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN
FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "
& "FOR INTEGER * FIXED FOR NON-MODEL NUMBERS");
END IF;
END C;
--------------------------------------------------
-- CASE D) FIXED * INTEGER FOR NON-MODEL NUMBERS.
D: DECLARE
A : FX_2 := 0.0;
B : INTEGER := 0;
RESULT_VALUE : FX_2 := 0.0;
LOW_COUNT : CONSTANT := (3 * (FORTH + 0) );
HIGH_COUNT : CONSTANT := (3 * (FORTH + 1) );
LOWEST_ACCEPTABLE_VALUE : FX_2
:= FX_2 (DEL4 * LOW_COUNT );
HIGHEST_ACCEPTABLE_VALUE : FX_2
:= FX_2 (DEL4 * HIGH_COUNT);
BEGIN
IF EQUAL (3, 3) THEN -- A NOT A MODEL NUMBER
A := FX_2 (DEL4 * FORTH + DEL1 );
B := 3;
END IF;
RESULT_VALUE := A * B;
IF (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)
OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN
FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "
& "FOR FIXED * INTEGER FOR NON-MODEL NUMBERS");
END IF;
END D;
--------------------------------------------------
RESULT;
END C45531M;
Go to most recent revision | Compare with Previous | Blame | View Log