OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [testsuite/] [ada/] [acats/] [tests/] [c4/] [c45532o.dep] - Rev 816

Compare with Previous | Blame | View Log

-- C45532O.DEP

--                             Grant of Unlimited Rights
--
--     Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
--     F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained 
--     unlimited rights in the software and documentation contained herein.
--     Unlimited rights are defined in DFAR 252.227-7013(a)(19).  By making 
--     this public release, the Government intends to confer upon all 
--     recipients unlimited rights  equal to those held by the Government.  
--     These rights include rights to use, duplicate, release or disclose the 
--     released technical data and computer software in whole or in part, in 
--     any manner and for any purpose whatsoever, and to have or permit others 
--     to do so.
--
--                                    DISCLAIMER
--
--     ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
--     DISCLOSED ARE AS IS.  THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED 
--     WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
--     SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE 
--     OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
--     PARTICULAR PURPOSE OF SAID MATERIAL.
--*
-- OBJECTIVE:
--     CHECK THAT THE OPERATOR "*" PRODUCES CORRECT RESULTS
--     FOR FIXED POINT TYPES USING 3 SUBTESTS.
--       THIS TEST REQUIRES MIN_WORD_LENGTH = 48.
--       THIS TEST USES VALUES OF DELTA WHICH ARE GREATER THAN OR
--       EQUAL TO 0.5.
--
--     TEST CASES ARE:
--       A) THE OPERATOR *, A, B, AND A * B ALL MODEL NUMBERS.
--       B) THE OPERATOR *, A, B MODEL NUMBERS A * B NOT.
--       C) THE OPERATOR *, USING NO MODEL NUMBERS.
--
--     REPEAT FOR MINIMUM REQUIRED WORD LENGTHS OF 12, 16, 32 AND 48,
--     WITH RANGE <, =, AND > THAN 1.0 AND
--     WITH DELTA <, =, AND > THAN 1.0.

-- APPLICABILITY CRITERIA:
--     THIS TEST IS APPLICABLE FOR IMPLEMENTATIONS WHICH HAVE A
--     'MAX_MANTISSA OF 47 OR GREATER.

--     IF 'MAX_MANTISSA >= 47 IS NOT SUPPORTED THEN THE DECLARATION OF
--     'TYPE FX_OP5' MUST BE REJECTED.

-- HISTORY:
--     NTW 09/08/86 CREATED ORIGINAL TEST.
--     RJW 11/05/86 REVISED COMMENTS.
--     DHH 01/13/88 ADDED APPLICABILITY CRITERIA AND STANDARD HEADER.
--     RDH 04/27/90 REVISED APPLICABILITY CRITERIA.

WITH REPORT;
PROCEDURE C45532O IS

     USE REPORT;

     MIN_WORD_LENGTH : CONSTANT := 48;
     FULL_SCALE      : CONSTANT := 2 ** (MIN_WORD_LENGTH - 1);
     FORTH           : CONSTANT := FULL_SCALE / 4;
     RNG1            : CONSTANT := FULL_SCALE * 0.5;
     TYPE FX_0P5  IS DELTA 0.5 RANGE -RNG1 * 1 .. RNG1 * 1 - 0.5;
                                                        -- N/A => ERROR.
     TYPE FX_1    IS DELTA 1.0 RANGE -RNG1 * 2 .. RNG1 * 2 - 1.0;
     TYPE FX_RNG1 IS DELTA RNG1
                    RANGE -RNG1 * FULL_SCALE .. RNG1 * (FULL_SCALE - 1);

BEGIN TEST ("C45532O", "FIXED POINT OPERATOR ""*""" );

     --------------------------------------------------

     -- CASE A) THE OPERATOR *, A, B, AND A * B ALL MODEL NUMBERS.

A:   DECLARE
          A              : FX_0P5  := 0.0;
          B              : FX_1    := 0.0;
          RESULT_VALUE   : FX_RNG1 := 0.0;
          LOWEST_ACCEPTABLE_VALUE
                         : FX_RNG1 := FX_RNG1 (RNG1 * RNG1 / 4);
          HIGHEST_ACCEPTABLE_VALUE
                         : FX_RNG1 := FX_RNG1 (RNG1 * RNG1 / 4);
     BEGIN
          IF EQUAL (3, 3) THEN
               A := FX_0P5 (RNG1 / 2);            -- A MODEL NUMBER
               B := FX_1   (RNG1 / 2);            -- A MODEL NUMBER
          END IF;

          RESULT_VALUE := FX_RNG1 (A * B);

          IF    (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)
             OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN
               FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "
                    &  "WHEN A, B, AND A * B ARE ALL MODEL NUMBERS");
          END IF;
     END A;

     --------------------------------------------------

     -- CASE B) THE OPERATOR *, A, B MODEL NUMBERS A * B NOT.

B:   DECLARE
          A              : FX_0P5  := 0.0;
          B              : FX_0P5  := 0.0;
          RESULT_VALUE   : FX_RNG1 := 0.0;
          LOW_COUNT     : CONSTANT := FULL_SCALE / 16;
          HIGH_COUNT    : CONSTANT := LOW_COUNT + 1;
          LOWEST_ACCEPTABLE_VALUE  :  FX_RNG1
                                   := FX_RNG1 (RNG1 * LOW_COUNT);
          HIGHEST_ACCEPTABLE_VALUE :  FX_RNG1
                                   := FX_RNG1 (RNG1 * HIGH_COUNT);
     BEGIN
          IF EQUAL (3, 3) THEN
               A := FX_0P5 (0.5 * (FORTH + 1) );  -- A MODEL NUMBER
               B := FX_0P5 (0.5 * (FORTH * 2) );  -- A MODEL NUMBER
          END IF;

          RESULT_VALUE := FX_RNG1 (A * B);

          IF    (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)
             OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN
               FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "
                    &  "WHEN A, B MODEL NUMBERS A * B NOT");
          END IF;
     END B;

     --------------------------------------------------

     -- CASE C) THE OPERATOR *, USING NO MODEL NUMBERS

C:   DECLARE
          A              : FX_1    := 0.0;
          B              : FX_1    := 0.0;
          RESULT_VALUE   : FX_RNG1    := 0.0;
          LOW_COUNT     : CONSTANT := FULL_SCALE / 32 - 1;
          HIGH_COUNT    : CONSTANT := FULL_SCALE / 32 + 1;
          LOWEST_ACCEPTABLE_VALUE  :  FX_RNG1
                                   := FX_RNG1 (RNG1 * LOW_COUNT);
          HIGHEST_ACCEPTABLE_VALUE :  FX_RNG1
                                   := FX_RNG1 (RNG1 * HIGH_COUNT);
     BEGIN
          IF EQUAL (3, 3) THEN
               A := FX_1 (0.5 * (FORTH + 1) );    -- NOT MODEL NUMBER
               B := FX_1 (0.5 * (FORTH - 1) );    -- NOT MODEL NUMBER
          END IF;

          RESULT_VALUE := FX_RNG1 (A * B);

          IF    (RESULT_VALUE < LOWEST_ACCEPTABLE_VALUE)
             OR (RESULT_VALUE > HIGHEST_ACCEPTABLE_VALUE) THEN
               FAILED ("RESULT OF ""*"" OUTSIDE RESULT MODEL INTERVAL "
                    &  "WHEN USING NO MODEL NUMBERS");
          END IF;
     END C;

     --------------------------------------------------


     RESULT;

END C45532O;

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.