URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [gcc/] [testsuite/] [ada/] [acats/] [tests/] [c9/] [c910001.a] - Rev 149
Go to most recent revision | Compare with Previous | Blame | View Log
-- C910001.A
--
-- Grant of Unlimited Rights
--
-- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
-- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained
-- unlimited rights in the software and documentation contained herein.
-- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making
-- this public release, the Government intends to confer upon all
-- recipients unlimited rights equal to those held by the Government.
-- These rights include rights to use, duplicate, release or disclose the
-- released technical data and computer software in whole or in part, in
-- any manner and for any purpose whatsoever, and to have or permit others
-- to do so.
--
-- DISCLAIMER
--
-- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
-- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED
-- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
-- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE
-- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
-- PARTICULAR PURPOSE OF SAID MATERIAL.
--*
--
-- OBJECTIVE:
-- Check that tasks may have discriminants. Specifically, check where
-- the subtype of the discriminant is a discrete subtype and where it is
-- an access subtype. Check the case where the default values of the
-- discriminants are used.
--
-- TEST DESCRIPTION:
-- A task is defined with two discriminants, one a discrete subtype and
-- another that is an access subtype. Tasks are created with various
-- values for discriminants and code within the task checks that these
-- are passed in correctly. One instance of a default is used. The
-- values passed to the task as the discriminants are taken from an
-- array of test data and the values received are checked against the
-- same array.
--
--
-- CHANGE HISTORY:
-- 06 Dec 94 SAIC ACVC 2.0
--
--!
with Report;
procedure C910001 is
type App_Priority is range 1..10;
Default_Priority : App_Priority := 5;
type Message_ID is range 1..10_000;
type TC_Number_of_Messages is range 1..5;
type TC_rec is record
TC_ID : Message_ID;
A_Priority : App_Priority;
TC_Checked : Boolean;
end record;
-- This table is used to create the messages and to check them
TC_table : array (1..TC_Number_of_Messages'Last) of TC_Rec :=
( ( 10, 6, false ),
( 20, 2, false ),
( 30, 9, false ),
( 40, 1, false ),
( 50, Default_Priority, false ) );
begin -- C910001
Report.Test ("C910001", "Check that tasks may have discriminants");
declare -- encapsulate the test
type Transaction_Record is
record
ID : Message_ID;
Account_Number : integer := 0;
Stock_Number : integer := 0;
Quantity : integer := 0;
Return_Value : integer := 0;
end record;
--
type acc_Transaction_Record is access Transaction_Record;
task type Message_Task
(In_Message : acc_Transaction_Record := null;
In_Priority : App_Priority := Default_Priority) is
entry Start;
end Message_Task;
type acc_Message_Task is access Message_Task;
--
--
task body Message_Task is
This_Message : acc_Transaction_Record := In_Message;
This_Priority : App_Priority := In_Priority;
TC_Match_Found : Boolean := false;
begin
accept Start;
-- In the example envisioned this task would then queue itself
-- upon some Distributor task which would send it off (requeue) to
-- the message processing tasks according to the priority of the
-- message and the current load on the system. For the test we
-- just verify the data passed in as discriminants and exit the task
--
-- Check for the special case of default discriminants
if This_Message = null then
-- The default In_Message has been passed, check that the
-- default priority was also passed
if This_Priority /= Default_Priority then
Report.Failed ("Incorrect Default Priority");
end if;
if TC_Table (TC_Number_of_Messages'Last).TC_Checked then
Report.Failed ("Duplicate Default messages");
else
-- Mark that default has been seen
TC_Table (TC_Number_of_Messages'Last).TC_Checked := True;
end if;
TC_Match_Found := true;
else
-- Check the data against the table
for i in TC_Number_of_Messages loop
if TC_Table(i).TC_ID = This_Message.ID then
-- this is the right slot in the table
if TC_Table(i).TC_checked then
-- Already checked
Report.Failed ("Duplicate Data");
else
TC_Table(i).TC_checked := true;
end if;
TC_Match_Found := true;
if TC_Table(i).A_Priority /= This_Priority then
Report.Failed ("ID/Priority mismatch");
end if;
exit;
end if;
end loop;
end if;
if not TC_Match_Found then
Report.Failed ("No ID match in table");
end if;
-- Allow the task to terminate
end Message_Task;
-- The Line Driver task accepts data from an external source and
-- builds them into a transaction record. It then generates a
-- message task. This message "contains" the record and is given
-- a priority according to the contents of the message. The priority
-- and transaction records are passed to the task as discriminants.
-- In this test we use a dummy record. Only the ID is of interest
-- so we pick that and the required priority from an array of
-- test data. We artificially limit the endless driver-loop to
-- the number of messages required for the test and add a special
-- case to check the defaults.
--
task Driver_Task;
--
task body Driver_Task is
begin
-- Create all but one of the required tasks
--
for i in 1..TC_Number_of_Messages'Last - 1 loop
declare
-- Create a record for the next message
Next_Transaction : acc_Transaction_Record :=
new Transaction_Record;
-- Create a task for the next message
Next_Message_Task : acc_Message_Task :=
new Message_Task( Next_Transaction,
TC_Table(i).A_Priority );
begin
-- Artificially plug the ID with the next from the table
-- In reality the whole record would be built here
Next_Transaction.ID := TC_Table(i).TC_ID;
-- Ensure the task does not start executing till the
-- transaction record is properly constructed
Next_Message_Task.Start;
end; -- declare
end loop;
-- For this subtest create one task with the default discriminants
--
declare
-- Create the task
Next_Message_Task : acc_Message_Task := new Message_Task;
begin
Next_Message_Task.Start;
end; -- declare
end Driver_Task;
begin
null;
end; -- encapsulation
-- Now verify that all the tasks executed and checked in
for i in TC_Number_of_Messages loop
if not TC_Table(i).TC_Checked then
Report.Failed
("Task" & integer'image(integer (i) ) & " did not verify");
end if;
end loop;
Report.Result;
end C910001;
Go to most recent revision | Compare with Previous | Blame | View Log