Subversion Repositories openrisc

-- CXF3A07.A 
--
--                             Grant of Unlimited Rights
--
--     Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
--     F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained 
--     unlimited rights in the software and documentation contained herein.
--     Unlimited rights are defined in DFAR 252.227-7013(a)(19).  By making 
--     this public release, the Government intends to confer upon all 
--     recipients unlimited rights  equal to those held by the Government.  
--     These rights include rights to use, duplicate, release or disclose the 
--     released technical data and computer software in whole or in part, in 
--     any manner and for any purpose whatsoever, and to have or permit others 
--     to do so.
--
--                                    DISCLAIMER
--
--     ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
--     DISCLOSED ARE AS IS.  THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED 
--     WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
--     SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE 
--     OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
--     PARTICULAR PURPOSE OF SAID MATERIAL.
--*
--
-- OBJECTIVE:
--      Check that Ada.Text_IO.Editing.Put and Ada.Strings.Fixed.Move
--      have the same effect in putting edited output results into string
--      variables.
--
-- TEST DESCRIPTION:
--      This test is structured using tables of data, consisting of
--      numerical values, picture strings, and expected image
--      result strings.  These data tables are found in package FXF3A00.
--      
--      The operation of the two above subprograms are examined twice, first
--      with the output of an edited output string to a receiving string
--      object of equal size, the other to a receiving string object of 
--      larger size, where justification and padding are considered.
--      The procedure Editing.Put will place an edited output string into
--      a larger receiving string with right justification and blank fill.
--      Procedure Move has parameter control of justification and fill, and
--      in this test will mirror Put by specifying right justification and
--      blank fill.  
--      
--      In the cases where the edited output string is of shorter length 
--      than the receiving string object, a blank-filled constant string
--      will be catenated to the front of the expected edited output string
--      for comparison with the receiving string object, enabling direct 
--      string comparison for result verification.
--      
-- TEST FILES:
--      The following files comprise this test:
--
--         FXF3A00.A   (foundation code)
--      => CXF3A07.A
--
--       
-- CHANGE HISTORY:
--      30 JAN 95   SAIC    Initial prerelease version.
--      11 MAR 97   PWB.CTA Fixed string lengths
--!

with FXF3A00;
with Ada.Text_IO.Editing;
with Ada.Strings.Fixed;
with Report;

procedure CXF3A07 is
begin

   Report.Test ("CXF3A07", "Check that Ada.Text_IO.Editing.Put and "  &
                           "Ada.Strings.Fixed.Move have the same "    &
                           "effect in putting edited output results " &
                           "into string variables");
   Test_Block:
   declare

      use Ada.Text_IO;

      -- Instantiate the Decimal_Output generic package for two
      -- different decimal data types.

      package Pack_2DP is          -- Uses decimal type with delta 0.01.
        new Editing.Decimal_Output(FXF3A00.Decimal_Type_2DP);

      package Pack_NDP is          -- Uses decimal type with delta 1.0.
        new Editing.Decimal_Output(Num => FXF3A00.Decimal_Type_NDP,
                                   Default_Currency   => "$",
                                   Default_Fill       => '*',
                                   Default_Separator  => ',',
                                   Default_Radix_Mark => '.');

      TC_Picture     : Editing.Picture;
      TC_Start_Loop  : Integer := 0;
      TC_End_Loop    : Integer := 0;
      TC_Offset      : Integer := 0;
      TC_Length      : Natural := 0;

      TC_Put_String_20,                   -- Longer than the longest edited
      TC_Move_String_20 : String(1..20);  -- output string.

      TC_Put_String_17,                   -- Exact length of longest edited
      TC_Move_String_17 : String(1..17);  -- output string in 2DP-US data set.
                                       
      TC_Put_String_8,                    -- Exact length of longest edited
      TC_Move_String_8  : String(1..8);   -- output string in NDP-US data set.
      

   begin

      -- Examine cases where the output string is longer than the length
      -- of the edited output result.  Use the instantiation of 
      -- Decimal_Output specific to data with two decimal places.

      TC_Start_Loop := 1;
      TC_End_Loop   := FXF3A00.Number_of_2DP_Items -              -- 10
                       FXF3A00.Number_Of_Foreign_Strings;

      for i in TC_Start_Loop..TC_End_Loop loop                    -- 1..10

         -- Create the picture object from the picture string.

         TC_Picture := Editing.To_Picture(FXF3A00.Valid_Strings(i).all,
                                          Blank_When_Zero => False);

         -- Determine the actual length of the edited output string
         -- that is expected from Put and Image.

         TC_Length := Pack_2DP.Length(Pic      => TC_Picture,
                                      Currency => "$");

         -- Determine the difference in length between the receiving string
         -- object and the expected length of the edited output string.
         -- Define a blank filled string constant with length equal to this
         -- length difference.

         declare
            TC_Length_Diff   : Integer := TC_Put_String_20'Length -
                                          TC_Length;
            TC_Buffer_String : constant String(1..TC_Length_Diff) := 
                                          (others => ' ');
         begin

            -- Fill the two receiving string objects with edited output,
            -- using the two different methods (Put and Move).

            Pack_2DP.Put(To         => TC_Put_String_20,
                         Item       => FXF3A00.Data_With_2DP(i),
                         Pic        => TC_Picture,
                         Currency   => "$",
                         Fill       => '*',
                         Separator  => ',',
                         Radix_Mark => '.');


            Ada.Strings.Fixed.Move
              (Source  => Pack_2DP.Image(Item => FXF3A00.Data_With_2DP(i),
                                         Pic        => TC_Picture,
                                         Currency   => "$",
                                         Fill       => '*',
                                         Separator  => ',',
                                         Radix_Mark => '.'),
               Target  => TC_Move_String_20,
               Drop    => Ada.Strings.Error,
               Justify => Ada.Strings.Right,
               Pad     => Ada.Strings.Space);

            -- Each receiving string object is now filled with the edited
            -- output result, right justified.
            -- Compare these two string objects with the expected edited
            -- output value, which is appended to the blank filled string
            -- whose length is the difference between the expected edited
            -- output length and the length of the receiving strings.

            if TC_Buffer_String & FXF3A00.Edited_Output(i).all  /=
               TC_Put_String_20                                    or
               TC_Buffer_String & FXF3A00.Edited_Output(i).all  /=
               TC_Move_String_20
            then
               Report.Failed("Failed case where the output string is " &
                             "longer than the length of the edited "   &
                             "output result, loop #" & Integer'Image(i));
            end if;

         exception
            when Layout_Error =>
               Report.Failed("Layout_Error raised when the output string " &
                             "is longer than the length of the edited "    &
                             "output result, loop #" & Integer'Image(i));
            when others       =>
               Report.Failed("Exception raised when the output string is " &
                             "longer than the length of the edited "       &
                             "output result, loop #" & Integer'Image(i));
         end;
      end loop;


      -- Repeat the above loop, but only evaluate three cases - those where
      -- the length of the expected edited output string is the exact length 
      -- of the receiving strings (no justification will be required within
      -- the string.  This series of evaluations again uses decimal data
      -- with two decimal places.

      for i in TC_Start_Loop..TC_End_Loop loop                    -- 1..10

         case i is
            when 1 | 5 | 7 =>

               -- Create the picture object from the picture string.
               TC_Picture := 
                 Editing.To_Picture(FXF3A00.Valid_Strings(i).all);

               -- Fill the two receiving string objects with edited output,
               -- using the two different methods (Put and Move).
               -- Use default parameters in the various calls where possible.

               Pack_2DP.Put(To         => TC_Put_String_17,
                            Item       => FXF3A00.Data_With_2DP(i),
                            Pic        => TC_Picture);


               Ada.Strings.Fixed.Move
                 (Source  => Pack_2DP.Image(Item => FXF3A00.Data_With_2DP(i),
                                            Pic  => TC_Picture),
                  Target  => TC_Move_String_17);

               -- Each receiving string object is now filled with the edited
               -- output result. Compare these two string objects with the 
               -- expected edited output value. 

               if FXF3A00.Edited_Output(i).all  /= TC_Put_String_17  or
                  FXF3A00.Edited_Output(i).all  /= TC_Move_String_17
               then
                  Report.Failed("Failed case where the output string is " &
                                "the exact length of the edited output "  &
                                "result, loop #" & Integer'Image(i));
               end if;

            when others => null;
         end case;
      end loop;


      -- Evaluate a mix of cases, where the expected edited output string
      -- length is either exactly as long or shorter than the receiving
      -- output string parameter.  This series of evaluations uses decimal
      -- data with no decimal places.

      TC_Start_Loop := TC_End_Loop + 1;                           -- 11
      TC_End_Loop   := TC_Start_Loop +                            -- 22
                       FXF3A00.Number_of_NDP_Items - 1;               
      TC_Offset     := FXF3A00.Number_of_Foreign_Strings;         -- 10
      -- This offset is required due to the arrangement of data within the
      -- tables found in FXF3A00.

      for i in TC_Start_Loop..TC_End_Loop loop                    -- 11..22

         -- Create the picture object from the picture string.

         TC_Picture := Editing.To_Picture(FXF3A00.Valid_Strings(i).all);

         -- Determine the actual length of the edited output string
         -- that is expected from Put and Image.

         TC_Length := Pack_NDP.Length(TC_Picture);

         -- Fill the two receiving string objects with edited output,
         -- using the two different methods (Put and Move).

         Pack_NDP.Put(TC_Put_String_8,
                      FXF3A00.Data_With_NDP(i-TC_Offset),
                      TC_Picture);

         Ada.Strings.Fixed.Move
           (Pack_NDP.Image(FXF3A00.Data_With_NDP(i-TC_Offset), TC_Picture),
            TC_Move_String_8,
            Ada.Strings.Error,
            Ada.Strings.Right,
            Ada.Strings.Space);

         -- Determine if there is a difference in length between the 
         -- receiving string object and the expected length of the edited 
         -- output string.  If so, then define a blank filled string constant 
         -- with length equal to this length difference.

         if TC_Length < TC_Put_String_8'Length then
            declare
               TC_Length_Diff   : Integer := TC_Put_String_8'Length -
                                             TC_Length;
               TC_Buffer_String : constant String(1..TC_Length_Diff) := 
                                          (others => ' ');
            begin

               -- Each receiving string object is now filled with the edited
               -- output result, right justified.
               -- Compare these two string objects with the expected edited
               -- output value, which is appended to the blank filled string
               -- whose length is the difference between the expected edited
               -- output length and the length of the receiving strings.

               if TC_Buffer_String & FXF3A00.Edited_Output(i+TC_Offset).all /=
                  TC_Put_String_8                                           or
                  TC_Buffer_String & FXF3A00.Edited_Output(i+TC_Offset).all /=
                  TC_Move_String_8
               then
                  Report.Failed("Failed case where the output string is "  &
                                "longer than the length of the edited "    &
                                "output result, loop #" & Integer'Image(i) &
                                ", using data with no decimal places");
               end if;
            end;
         else

            -- Compare these two string objects with the expected edited
            -- output value, which is appended to the blank filled string
            -- whose length is the difference between the expected edited
            -- output length and the length of the receiving strings.

            if FXF3A00.Edited_Output(i+TC_Offset).all /= TC_Put_String_8 or
               FXF3A00.Edited_Output(i+TC_Offset).all /= TC_Move_String_8
            then
               Report.Failed("Failed case where the output string is "  &
                             "the same length as the edited output "    &
                             "result, loop #" & Integer'Image(i)        &
                             ", using data with no decimal places");
            end if;
         end if;
      end loop;

   exception
      when others => Report.Failed("Exception raised in Test_Block");
   end Test_Block;

   Report.Result;

end CXF3A07;