OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gcc-4.2.2/] [libmudflap/] [Makefile.in] - Rev 853

Go to most recent revision | Compare with Previous | Blame | View Log

# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@


srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(am__configure_deps) $(nobase_libsubinclude_HEADERS) \
        $(srcdir)/../config.guess $(srcdir)/../config.sub \
        $(srcdir)/../depcomp $(srcdir)/../install-sh \
        $(srcdir)/../ltmain.sh $(srcdir)/../missing \
        $(srcdir)/../mkinstalldirs $(srcdir)/Makefile.am \
        $(srcdir)/Makefile.in $(srcdir)/config.h.in \
        $(top_srcdir)/configure ChangeLog
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
        $(top_srcdir)/../config/depstand.m4 \
        $(top_srcdir)/../config/enable.m4 \
        $(top_srcdir)/../config/lead-dot.m4 \
        $(top_srcdir)/../config/tls.m4 $(top_srcdir)/acinclude.m4 \
        $(top_srcdir)/../libtool.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(toolexeclibdir)" \
        "$(DESTDIR)$(libsubincludedir)"
toolexeclibLTLIBRARIES_INSTALL = $(INSTALL)
LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
am_libmudflap_la_OBJECTS = mf-runtime.lo mf-heuristics.lo mf-hooks1.lo \
        mf-hooks2.lo
libmudflap_la_OBJECTS = $(am_libmudflap_la_OBJECTS)
am_libmudflapth_la_OBJECTS =
libmudflapth_la_OBJECTS = $(am_libmudflapth_la_OBJECTS)
@LIBMUDFLAPTH_TRUE@am_libmudflapth_la_rpath = -rpath $(toolexeclibdir)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
        $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
        $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
        $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libmudflap_la_SOURCES) $(libmudflapth_la_SOURCES)
DIST_SOURCES = $(libmudflap_la_SOURCES) $(libmudflapth_la_SOURCES)
MULTISRCTOP = 
MULTIBUILDTOP = 
MULTIDIRS = 
MULTISUBDIR = 
MULTIDO = true
MULTICLEAN = true
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
        html-recursive info-recursive install-data-recursive \
        install-exec-recursive install-info-recursive \
        install-recursive installcheck-recursive installdirs-recursive \
        pdf-recursive ps-recursive uninstall-info-recursive \
        uninstall-recursive
nobase_libsubincludeHEADERS_INSTALL = $(install_sh_DATA)
HEADERS = $(nobase_libsubinclude_HEADERS)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBMUDFLAPTH_FALSE = @LIBMUDFLAPTH_FALSE@
LIBMUDFLAPTH_TRUE = @LIBMUDFLAPTH_TRUE@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MF_HAVE_STDINT_H = @MF_HAVE_STDINT_H@
MF_HAVE_UINTPTR_T = @MF_HAVE_UINTPTR_T@
NM = @NM@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
ac_ct_CC = @ac_ct_CC@
ac_ct_NM = @ac_ct_NM@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_libmudflapth = @build_libmudflapth@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_noncanonical = @target_noncanonical@
target_os = @target_os@
target_vendor = @target_vendor@
toolexecdir = @toolexecdir@
toolexeclibdir = @toolexeclibdir@
AUTOMAKE_OPTIONS = 1.8 foreign
ACLOCAL_AMFLAGS = -I .. -I ../config
MAINT_CHARSET = latin1
SUBDIRS = testsuite

# May be used by various substitution variables.
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
AM_CFLAGS = -Wall $(SECTION_FLAGS)
@LIBMUDFLAPTH_FALSE@libmudflapth = 
@LIBMUDFLAPTH_TRUE@libmudflapth = libmudflapth.la
toolexeclib_LTLIBRARIES = libmudflap.la $(libmudflapth)
libsubincludedir = $(libdir)/gcc/$(target_noncanonical)/$(gcc_version)/include
nobase_libsubinclude_HEADERS = mf-runtime.h
libmudflap_la_SOURCES = \
        mf-runtime.c \
        mf-heuristics.c \
        mf-hooks1.c \
        mf-hooks2.c

libmudflap_la_LIBADD = 
libmudflap_la_DEPENDENCIES = $(libmudflap_la_LIBADD)
libmudflap_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version`
libmudflapth_la_SOURCES = 
libmudflapth_la_LIBADD = \
        pth/mf-runtime.lo \
        pth/mf-heuristics.lo \
        pth/mf-hooks1.lo \
        pth/mf-hooks2.lo \
        pth/mf-hooks3.lo

libmudflapth_la_DEPENDENCIES = $(libmudflapth_la_LIBADD)
libmudflapth_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version`

# XXX hack alert
# From libffi/Makefile.am

# Work around what appears to be a GNU make bug handling MAKEFLAGS
# values defined in terms of make variables, as is the case for CC and
# friends when we are called from the top level Makefile.
AM_MAKEFLAGS = \
        "AR_FLAGS=$(AR_FLAGS)" \
        "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
        "CFLAGS=$(CFLAGS)" \
        "CXXFLAGS=$(CXXFLAGS)" \
        "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
        "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
        "INSTALL=$(INSTALL)" \
        "INSTALL_DATA=$(INSTALL_DATA)" \
        "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
        "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
        "JC1FLAGS=$(JC1FLAGS)" \
        "LDFLAGS=$(LDFLAGS)" \
        "LIBCFLAGS=$(LIBCFLAGS)" \
        "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
        "MAKE=$(MAKE)" \
        "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
        "PICFLAG=$(PICFLAG)" \
        "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
        "SHELL=$(SHELL)" \
        "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
        "exec_prefix=$(exec_prefix)" \
        "infodir=$(infodir)" \
        "libdir=$(libdir)" \
        "prefix=$(prefix)" \
        "includedir=$(includedir)" \
        "AR=$(AR)" \
        "AS=$(AS)" \
        "CC=$(CC)" \
        "CXX=$(CXX)" \
        "LD=$(LD)" \
        "LIBCFLAGS=$(LIBCFLAGS)" \
        "NM=$(NM)" \
        "PICFLAG=$(PICFLAG)" \
        "RANLIB=$(RANLIB)" \
        "DESTDIR=$(DESTDIR)"

MAKEOVERRIDES = 
all: config.h
        $(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am--refresh:
        @:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
              cd $(srcdir) && $(AUTOMAKE) --foreign  \
                && exit 0; \
              exit 1;; \
          esac; \
        done; \
        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
        cd $(top_srcdir) && \
          $(AUTOMAKE) --foreign  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
        @case '$?' in \
          *config.status*) \
            echo ' $(SHELL) ./config.status'; \
            $(SHELL) ./config.status;; \
          *) \
            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
        $(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
        cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
        cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

config.h: stamp-h1
        @if test ! -f $@; then \
          rm -f stamp-h1; \
          $(MAKE) stamp-h1; \
        else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
        @rm -f stamp-h1
        cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
        cd $(top_srcdir) && $(AUTOHEADER)
        rm -f stamp-h1
        touch $@

distclean-hdr:
        -rm -f config.h stamp-h1
install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
        @$(NORMAL_INSTALL)
        test -z "$(toolexeclibdir)" || $(mkdir_p) "$(DESTDIR)$(toolexeclibdir)"
        @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
          if test -f $$p; then \
            f=$(am__strip_dir) \
            echo " $(LIBTOOL) --mode=install $(toolexeclibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
            $(LIBTOOL) --mode=install $(toolexeclibLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(toolexeclibdir)/$$f"; \
          else :; fi; \
        done

uninstall-toolexeclibLTLIBRARIES:
        @$(NORMAL_UNINSTALL)
        @set -x; list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
          p=$(am__strip_dir) \
          echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$p'"; \
          $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$p"; \
        done

clean-toolexeclibLTLIBRARIES:
        -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
        @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
          dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
          test "$$dir" != "$$p" || dir=.; \
          echo "rm -f \"$${dir}/so_locations\""; \
          rm -f "$${dir}/so_locations"; \
        done
libmudflap.la: $(libmudflap_la_OBJECTS) $(libmudflap_la_DEPENDENCIES) 
        $(LINK) -rpath $(toolexeclibdir) $(libmudflap_la_LDFLAGS) $(libmudflap_la_OBJECTS) $(libmudflap_la_LIBADD) $(LIBS)
libmudflapth.la: $(libmudflapth_la_OBJECTS) $(libmudflapth_la_DEPENDENCIES) 
        $(LINK) $(am_libmudflapth_la_rpath) $(libmudflapth_la_LDFLAGS) $(libmudflapth_la_OBJECTS) $(libmudflapth_la_LIBADD) $(LIBS)

mostlyclean-compile:
        -rm -f *.$(OBJEXT)

distclean-compile:
        -rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mf-heuristics.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mf-hooks1.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mf-hooks2.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mf-runtime.Plo@am__quote@

.c.o:
@am__fastdepCC_TRUE@    if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@    then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@   $(COMPILE) -c $<

.c.obj:
@am__fastdepCC_TRUE@    if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@    then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@    if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@    then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@   $(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
        -rm -f *.lo

clean-libtool:
        -rm -rf .libs _libs

distclean-libtool:
        -rm -f libtool

# GNU Make needs to see an explicit $(MAKE) variable in the command it
# runs to enable its job server during parallel builds.  Hence the
# comments below.
all-multi:
        $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
install-multi:
        $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)

mostlyclean-multi:
        $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
clean-multi:
        $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
distclean-multi:
        $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
maintainer-clean-multi:
        $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
uninstall-info-am:
install-nobase_libsubincludeHEADERS: $(nobase_libsubinclude_HEADERS)
        @$(NORMAL_INSTALL)
        test -z "$(libsubincludedir)" || $(mkdir_p) "$(DESTDIR)$(libsubincludedir)"
        @$(am__vpath_adj_setup) \
        list='$(nobase_libsubinclude_HEADERS)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          $(am__vpath_adj) \
          echo " $(nobase_libsubincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(libsubincludedir)/$$f'"; \
          $(nobase_libsubincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(libsubincludedir)/$$f"; \
        done

uninstall-nobase_libsubincludeHEADERS:
        @$(NORMAL_UNINSTALL)
        @$(am__vpath_adj_setup) \
        list='$(nobase_libsubinclude_HEADERS)'; for p in $$list; do \
          $(am__vpath_adj) \
          echo " rm -f '$(DESTDIR)$(libsubincludedir)/$$f'"; \
          rm -f "$(DESTDIR)$(libsubincludedir)/$$f"; \
        done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
        @failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            dot_seen=yes; \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done; \
        if test "$$dot_seen" = "no"; then \
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
        @failcom='exit 1'; \
        for f in x $$MAKEFLAGS; do \
          case $$f in \
            *=* | --[!k]*);; \
            *k*) failcom='fail=yes';; \
          esac; \
        done; \
        dot_seen=no; \
        case "$@" in \
          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
          *) list='$(SUBDIRS)' ;; \
        esac; \
        rev=''; for subdir in $$list; do \
          if test "$$subdir" = "."; then :; else \
            rev="$$subdir $$rev"; \
          fi; \
        done; \
        rev="$$rev ."; \
        target=`echo $@ | sed s/-recursive//`; \
        for subdir in $$rev; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
          || eval $$failcom; \
        done && test -z "$$fail"
tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        done
ctags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
        done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        tags=; \
        here=`pwd`; \
        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
          include_option=--etags-include; \
          empty_fix=.; \
        else \
          include_option=--include; \
          empty_fix=; \
        fi; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test ! -f $$subdir/TAGS || \
              tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
          fi; \
        done; \
        list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
          test -n "$$unique" || unique=$$empty_fix; \
          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
            $$tags $$unique; \
        fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        tags=; \
        here=`pwd`; \
        list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        test -z "$(CTAGS_ARGS)$$tags$$unique" \
          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
             $$tags $$unique

GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
          && cd $(top_srcdir) \
          && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
        $(am__remove_distdir)
        mkdir $(distdir)
        $(mkdir_p) $(distdir)/.. $(distdir)/../config $(distdir)/testsuite
        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
        list='$(DISTFILES)'; for file in $$list; do \
          case $$file in \
            $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
            $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
          esac; \
          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
          dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
          if test "$$dir" != "$$file" && test "$$dir" != "."; then \
            dir="/$$dir"; \
            $(mkdir_p) "$(distdir)$$dir"; \
          else \
            dir=''; \
          fi; \
          if test -d $$d/$$file; then \
            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
            fi; \
            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
          else \
            test -f $(distdir)/$$file \
            || cp -p $$d/$$file $(distdir)/$$file \
            || exit 1; \
          fi; \
        done
        list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
            || $(mkdir_p) "$(distdir)/$$subdir" \
            || exit 1; \
            distdir=`$(am__cd) $(distdir) && pwd`; \
            top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
            (cd $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
                top_distdir="$$top_distdir" \
                distdir="$$distdir/$$subdir" \
                distdir) \
              || exit 1; \
          fi; \
        done
        -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
          ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
        || chmod -R a+r $(distdir)
dist-gzip: distdir
        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)

dist-bzip2: distdir
        tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
        $(am__remove_distdir)

dist-tarZ: distdir
        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
        $(am__remove_distdir)

dist-shar: distdir
        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
        $(am__remove_distdir)

dist-zip: distdir
        -rm -f $(distdir).zip
        zip -rq $(distdir).zip $(distdir)
        $(am__remove_distdir)

dist dist-all: distdir
        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
        case '$(DIST_ARCHIVES)' in \
        *.tar.gz*) \
          GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
        *.tar.bz2*) \
          bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
        *.tar.Z*) \
          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
        *.shar.gz*) \
          GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
        *.zip*) \
          unzip $(distdir).zip ;;\
        esac
        chmod -R a-w $(distdir); chmod a+w $(distdir)
        mkdir $(distdir)/_build
        mkdir $(distdir)/_inst
        chmod a-w $(distdir)
        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
          && cd $(distdir)/_build \
          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
            $(DISTCHECK_CONFIGURE_FLAGS) \
          && $(MAKE) $(AM_MAKEFLAGS) \
          && $(MAKE) $(AM_MAKEFLAGS) dvi \
          && $(MAKE) $(AM_MAKEFLAGS) check \
          && $(MAKE) $(AM_MAKEFLAGS) install \
          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
                distuninstallcheck \
          && chmod -R a-w "$$dc_install_base" \
          && ({ \
               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
              } || { rm -rf "$$dc_destdir"; exit 1; }) \
          && rm -rf "$$dc_destdir" \
          && $(MAKE) $(AM_MAKEFLAGS) dist \
          && rm -rf $(DIST_ARCHIVES) \
          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
        $(am__remove_distdir)
        @(echo "$(distdir) archives ready for distribution: "; \
          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
          sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
        @cd $(distuninstallcheck_dir) \
        && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
           || { echo "ERROR: files left after uninstall:" ; \
                if test -n "$(DESTDIR)"; then \
                  echo "  (check DESTDIR support)"; \
                fi ; \
                $(distuninstallcheck_listfiles) ; \
                exit 1; } >&2
distcleancheck: distclean
        @if test '$(srcdir)' = . ; then \
          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
          exit 1 ; \
        fi
        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
          || { echo "ERROR: files left in build directory after distclean:" ; \
               $(distcleancheck_listfiles) ; \
               exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(LTLIBRARIES) all-multi $(HEADERS) config.h
installdirs: installdirs-recursive
installdirs-am:
        for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(libsubincludedir)"; do \
          test -z "$$dir" || $(mkdir_p) "$$dir"; \
        done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
clean: clean-multi clean-recursive

clean-am: clean-generic clean-libtool clean-local \
        clean-toolexeclibLTLIBRARIES mostlyclean-am

distclean: distclean-multi distclean-recursive
        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
        -rm -rf ./$(DEPDIR)
        -rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
        distclean-hdr distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-nobase_libsubincludeHEADERS

install-exec-am: install-multi install-toolexeclibLTLIBRARIES

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
        -rm -rf $(top_srcdir)/autom4te.cache
        -rm -rf ./$(DEPDIR)
        -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-multi mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
        mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am uninstall-nobase_libsubincludeHEADERS \
        uninstall-toolexeclibLTLIBRARIES

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-multi \
        am--refresh check check-am clean clean-generic clean-libtool \
        clean-local clean-multi clean-recursive \
        clean-toolexeclibLTLIBRARIES ctags ctags-recursive dist \
        dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
        distcheck distclean distclean-compile distclean-generic \
        distclean-hdr distclean-libtool distclean-multi \
        distclean-recursive distclean-tags distcleancheck distdir \
        distuninstallcheck dvi dvi-am html html-am info info-am \
        install install-am install-data install-data-am install-exec \
        install-exec-am install-info install-info-am install-man \
        install-multi install-nobase_libsubincludeHEADERS \
        install-strip install-toolexeclibLTLIBRARIES installcheck \
        installcheck-am installdirs installdirs-am maintainer-clean \
        maintainer-clean-generic maintainer-clean-multi \
        maintainer-clean-recursive mostlyclean mostlyclean-compile \
        mostlyclean-generic mostlyclean-libtool mostlyclean-multi \
        mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
        uninstall uninstall-am uninstall-info-am \
        uninstall-nobase_libsubincludeHEADERS \
        uninstall-toolexeclibLTLIBRARIES


clean-local:
        rm -f pth/*.o pth/*.lo

pth/mf-runtime.lo: mf-runtime.c mf-runtime.h mf-impl.h
        $(LTCOMPILE) -DLIBMUDFLAPTH -c $(srcdir)/mf-runtime.c -o $@
pth/mf-heuristics.lo: mf-heuristics.c mf-runtime.h mf-impl.h
        $(LTCOMPILE) -DLIBMUDFLAPTH -c $(srcdir)/mf-heuristics.c -o $@
pth/mf-hooks1.lo: mf-hooks1.c mf-runtime.h mf-impl.h
        $(LTCOMPILE) -DLIBMUDFLAPTH -c $(srcdir)/mf-hooks1.c -o $@
pth/mf-hooks2.lo: mf-hooks2.c mf-runtime.h mf-impl.h
        $(LTCOMPILE) -DLIBMUDFLAPTH -c $(srcdir)/mf-hooks2.c -o $@
pth/mf-hooks3.lo: mf-hooks3.c mf-runtime.h mf-impl.h
        $(LTCOMPILE) -DLIBMUDFLAPTH -c $(srcdir)/mf-hooks3.c -o $@

.PHONY: install-html

install-html:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.