Subversion Repositories openrisc

#! /bin/sh

# ltconfig - Create a system-specific libtool.
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# A lot of this script is taken from autoconf-2.10.

# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
echo=echo
if test "X$1" = X--no-reexec; then
  # Discard the --no-reexec flag, and continue.
  shift
elif test "X$1" = X--fallback-echo; then
  # Avoid inline document here, it may be left over
  :
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
  # Yippee, $echo works!
  :
else
  # Restart under the correct shell.
  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
fi

if test "X$1" = X--fallback-echo; then
  # used as fallback echo
  shift
  cat <<EOF
$*
EOF
  exit 0
fi

# Find the correct PATH separator.  Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != Xset; then
  UNAME=${UNAME-`uname 2>/dev/null`}
  case X$UNAME in
    *-DOS) PATH_SEPARATOR=';' ;;
    *)     PATH_SEPARATOR=':' ;;
  esac
fi

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

if test "X${echo_test_string+set}" != Xset; then
  # find a string as large as possible, as long as the shell can cope with it
  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
       echo_test_string="`eval $cmd`" &&
       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
      break
    fi
  done
fi

if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
   test "X$echo_testing_string" = "X$echo_test_string"; then
  :
else
  # The Solaris, AIX, and Digital Unix default echo programs unquote
  # backslashes.  This makes it impossible to quote backslashes using
  #   echo "$something" | sed 's/\\/\\\\/g'
  #
  # So, first we look for a working echo in the user's PATH.

  IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
  for dir in $PATH /usr/ucb; do
    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      echo="$dir/echo"
      break
    fi
  done
  IFS="$save_ifs"

  if test "X$echo" = Xecho; then
    # We didn't find a better echo, so look for alternatives.
    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
       test "X$echo_testing_string" = "X$echo_test_string"; then
      # This shell has a builtin print -r that does the trick.
      echo='print -r'
    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
         test "X$CONFIG_SHELL" != X/bin/ksh; then
      # If we have ksh, try running ltconfig again with it.
      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
      export ORIGINAL_CONFIG_SHELL
      CONFIG_SHELL=/bin/ksh
      export CONFIG_SHELL
      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
    else
      # Try using printf.
      echo='printf %s\n'
      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
         echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
         test "X$echo_testing_string" = "X$echo_test_string"; then
        # Cool, printf works
        :
      elif echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&
           test "X$echo_testing_string" = 'X\t' &&
           echo_testing_string=`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
           test "X$echo_testing_string" = "X$echo_test_string"; then
        CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
        export CONFIG_SHELL
        SHELL="$CONFIG_SHELL"
        export SHELL
        echo="$CONFIG_SHELL $0 --fallback-echo"
      elif echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null` &&
           test "X$echo_testing_string" = 'X\t' &&
           echo_testing_string=`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
           test "X$echo_testing_string" = "X$echo_test_string"; then
        echo="$CONFIG_SHELL $0 --fallback-echo"
      else
        # maybe with a smaller string...
        prev=:

        for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
          if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
            break
          fi
          prev="$cmd"
        done

        if test "$prev" != 'sed 50q "$0"'; then
          echo_test_string=`eval $prev`
          
          export echo_test_string
          exec "${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}}" "$0" ${1+"$@"}
        else
          # Oops.  We lost completely, so just stick with echo.
          echo=echo
        fi
      fi
    fi
  fi
fi

# Sed substitution that helps us do robust quoting.  It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'

# Same as above, but do not quote variable references.
double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# The name of this program.
progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`

# Constants:
PROGRAM=ltconfig
PACKAGE=libtool
VERSION=1.4a-GCC3.0
TIMESTAMP=" (1.641.2.256 2001/05/28 20:09:07 with GCC-local changes)"
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
rm="rm -f"

help="Try \`$progname --help' for more information."

# Global variables:
default_ofile=libtool
can_build_shared=yes
enable_shared=yes
# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
enable_static=yes
enable_fast_install=yes
enable_dlopen=unknown
enable_win32_dll=no
pic_mode=default
ltmain=
silent=
srcdir=
ac_config_guess=
ac_config_sub=
host=
build=NONE
nonopt=NONE
ofile="$default_ofile"
verify_host=yes
tagname=
with_gcc=no
with_gnu_ld=no
need_locks=yes
ac_ext=c
libext=a
cache_file=
max_cmd_len=

## Dependencies to place before and after the object being linked:
predep_objects=
postdep_objects=
predeps=
postdeps=
compiler_lib_search_path=

## Link characteristics:
allow_undefined_flag=
no_undefined_flag=
need_lib_prefix=unknown
need_version=unknown
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
archive_cmds=
archive_expsym_cmds=
old_archive_from_new_cmds=
old_archive_from_expsyms_cmds=
striplib=
old_striplib=
export_dynamic_flag_spec=
whole_archive_flag_spec=
thread_safe_flag_spec=
hardcode_into_libs=no
hardcode_libdir_flag_spec=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
runpath_var=
link_all_deplibs=unknown
always_export_symbols=no
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an egrep regular expression of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced.  Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
file_list_spec=

## Tools:
old_AR="$AR"
old_AR_FLAGS="$AR_FLAGS"
old_CC="$CC"
old_CFLAGS="$CFLAGS"
old_CPPFLAGS="$CPPFLAGS"
old_LDFLAGS="$LDFLAGS"
old_LIBS="$LIBS"
old_MAGIC_CMD="$MAGIC_CMD"
old_LD="$LD"
old_LN_S="$LN_S"
old_LTCC="$LTCC"
old_NM="$NM"
old_RANLIB="$RANLIB"
old_STRIP="$STRIP"
old_AS="$AS"
old_DLLTOOL="$DLLTOOL"
old_OBJDUMP="$OBJDUMP"
old_OBJEXT="$OBJEXT"
old_EXEEXT="$EXEEXT"
old_reload_flag="$reload_flag"
old_deplibs_check_method="$deplibs_check_method"
old_file_magic_cmd="$file_magic_cmd"

# Parse the command line options.
args=
prev=
for option
do
  case $option in
  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) optarg= ;;
  esac

  # If the previous option needs an argument, assign it.
  if test -n "$prev"; then
    eval "$prev=\$option"
    prev=
    continue
  fi

  case $option in
  --help) cat <<EOM
Usage: $progname [OPTION]... LTMAIN [HOST]

Generate a system-specific libtool script.

    --build                configure for building on BUILD [BUILD=HOST]
    --debug                enable verbose shell tracing
    --disable-shared       do not build shared libraries
    --disable-static       do not build static libraries
    --disable-fast-install do not optimize for fast installation
    --enable-dlopen        enable dlopen support
    --enable-win32-dll     enable building dlls on win32 hosts
    --help                 display this help and exit
    --no-verify            do not verify that HOST is a valid host type
-o, --output=FILE          specify the output file [default=$default_ofile]
    --quiet                same as \`--silent'
    --silent               do not print informational messages
    --srcdir=DIR           find \`config.guess' in DIR
    --version              output version information and exit
    --add-tag=TAG          append an alternate configuration
    --with-gcc             assume that the GNU C compiler will be used
    --with-gnu-ld          assume that the C compiler uses the GNU linker
    --prefer-pic           try to use only PIC objects
    --prefer-non-pic       try to use only non-PIC objects
    --disable-lock         disable file locking
    --cache-file=FILE      configure cache file

LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
that provides basic libtool functionality.

HOST is the canonical host system name [default=guessed].
EOM
  exit 0
  ;;

  --build) prev=build ;;
  --build=*) build="$optarg" ;;

  --debug)
    echo "$progname: enabling shell trace mode"
    set -x
    ;;

  --disable-shared) enable_shared=no ;;

  --disable-static) enable_static=no ;;

  --disable-fast-install) enable_fast_install=no ;;

  --enable-dlopen) enable_dlopen=yes ;;

  --enable-win32-dll) enable_win32_dll=yes ;;

  --quiet | --silent) silent=yes ;;

  --srcdir) prev=srcdir ;;
  --srcdir=*) srcdir="$optarg" ;;

  --no-verify) verify_host=no ;;

  --output | -o) prev=ofile ;;
  --output=*) ofile="$optarg" ;;

  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;

  --add-tag) prev=tagname ;;
  --add-tag=*) tagname="$optarg" ;;

  --with-gcc) with_gcc=yes ;;
  --with-gnu-ld) with_gnu_ld=yes ;;

  --prefer-pic) pic_mode=yes ;;
  --prefer-non-pic) pic_mode=no ;;

  --disable-lock) need_locks=no ;;

  --cache-file=*) cache_file="$optarg" ;;

  -*)
    echo "$progname: unrecognized option \`$option'" 1>&2
    echo "$help" 1>&2
    exit 1
    ;;

  *)
    if test -z "$ltmain"; then
      ltmain="$option"
    elif test -z "$host"; then
# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
#      fi
      host="$option"
    else
      echo "$progname: too many arguments" 1>&2
      echo "$help" 1>&2
      exit 1
    fi ;;
  esac
done

if test -z "$ltmain"; then
  echo "$progname: you must specify a LTMAIN file" 1>&2
  echo "$help" 1>&2
  exit 1
fi

if test ! -f "$ltmain"; then
  echo "$progname: \`$ltmain' does not exist" 1>&2
  echo "$help" 1>&2
  exit 1
fi

if test -n "$tagname"; then
  # Check whether tagname contains only valid characters
  case `$echo "X$tagname" | $Xsed -e 's/[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]//g'` in
  "") ;;
  *)
    echo "$progname: invalid tag name: $tagname" 1>&2
    exit 1
    ;;
  esac

  if grep "^### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$ofile" > /dev/null; then
    echo "$progname: tag name $tagname already exists" 1>&2
    exit 1
  fi

  if test ! -f "$ofile"; then
    echo "$progname: warning: output file \`$ofile' does not exist" 1>&2
  fi

  if test -z "$LTCC"; then
    eval "`$SHELL $ofile --config | grep '^LTCC='`"
    if test -z "$LTCC"; then
      echo "$progname: warning: output file \`$ofile' does not look like a libtool script" 1>&2
    else
      echo "$progname: warning: using \`LTCC=$LTCC', extracted from \`$ofile'" 1>&2
    fi
  fi
fi

# Quote any args containing shell metacharacters.
ltconfig_args=
for arg
do
  case $arg in
  *" "*|*"      "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ltconfig_args="$ltconfig_args '$arg'" ;;
  *) ltconfig_args="$ltconfig_args $arg" ;;
  esac
done

# A relevant subset of AC_INIT.

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 5 compiler messages saved in config.log
# 6 checking for... messages and results
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>>./config.log

# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
if test "X${LANG+set}"   = Xset; then LANG=C;   export LANG;   fi

if test -n "$cache_file" && test -r "$cache_file" && test -f "$cache_file"; then
  echo "loading cache $cache_file within ltconfig"
  . $cache_file
fi

if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='        '
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi

if test -z "$srcdir"; then
  # Assume the source directory is the same one as the path to LTMAIN.
  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
  test "$srcdir" = "$ltmain" && srcdir=.
fi

trap "$rm conftest*; exit 1" 1 2 15
if test "$verify_host" = yes; then
  # Check for config.guess and config.sub.
  ac_aux_dir=
  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
    if test -f $ac_dir/config.guess; then
      ac_aux_dir=$ac_dir
      break
    fi
  done
  if test -z "$ac_aux_dir"; then
    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
    echo "$help" 1>&2
    exit 1
  fi
  ac_config_guess=$ac_aux_dir/config.guess
  ac_config_sub=$ac_aux_dir/config.sub

  # Make sure we can run config.sub.
  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
  else
    echo "$progname: cannot run $ac_config_sub" 1>&2
    echo "$help" 1>&2
    exit 1
  fi

  echo $ac_n "checking host system type""... $ac_c" 1>&6

  host_alias=$host
  case $host_alias in
  "")
    # Force config.guess to use the C compiler.
    # CC_FOR_BUILD overrides the CC variable in config.guess but I had
    # problems with it so do it this way for now.
    CC="$LTCC"

    if host_alias=`$SHELL $ac_config_guess`; then :
    else
      echo "$progname: cannot guess host type; you must specify one" 1>&2
      echo "$help" 1>&2
      exit 1
    fi

    # Restore the C compiler.
    CC="$old_CC"
    ;;
  esac
  host=`$SHELL $ac_config_sub $host_alias`
  echo "$ac_t$host" 1>&6

  # Make sure the host verified.
  test -z "$host" && exit 1

  # Check for the build system type
  echo $ac_n "checking build system type... $ac_c" 1>&6

  build_alias=$build
  case $build_alias in
  NONE)
    case $nonopt in
    NONE) build_alias=$host_alias ;;
    *) build_alias=$nonopt ;;
    esac ;;
  esac

  build=`$SHELL $ac_config_sub $build_alias`
  build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
  build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
  build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
  echo "$ac_t""$build" 1>&6

elif test -z "$host"; then
  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
  echo "$help" 1>&2
  exit 1
else
  host_alias=$host
  build_alias=$host_alias
  build=$host
fi

if test x"$host" != x"$build"; then
  ac_tool_prefix=${host_alias}-
else
  ac_tool_prefix=
fi

host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`

# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
case $host_os in
linux-gnu*) ;;
linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
esac

case $host_os in
aix3*)
  # AIX sometimes has problems with the GCC collect2 program.  For some
  # reason, if we set the COLLECT_NAMES environment variable, the problems
  # vanish in a puff of smoke.
  if test "X${COLLECT_NAMES+set}" != Xset; then
    COLLECT_NAMES=
    export COLLECT_NAMES
  fi
  ;;
esac

# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=

if test -n "$RANLIB"; then
  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
  old_postinstall_cmds="~$old_postinstall_cmds~\$RANLIB \$oldlib"
fi

# Source the script associated with the $tagname tag configuration.
if test -n "$tagname"; then
  . $ltmain
else
  # FIXME:  We should use a variable here
  # Configure for a C compiler
  . $srcdir/ltcf-c.sh
fi

# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$NM" && NM=nm
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$objext" && objext=o

echo $ac_n "checking for objdir... $ac_c" 1>&6
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
  objdir=.libs
else
  # MS-DOS does not allow filenames that begin with a dot.
  objdir=_libs
fi
rmdir .libs 2>/dev/null
echo "$ac_t$objdir" 1>&6

# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}

# Allow CC to be a program name with arguments.
set dummy $CC
compiler="$2"

# We assume here that the value for ac_cv_prog_cc_pic will not be cached
# in isolation, and that seeing it set (from the cache) indicates that
# the associated values are set (in the cache) correctly too.
echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
echo "$progname:678:checking for $compiler option to produce PIC" 1>&5

if test -z "$ac_cv_prog_cc_pic"; then
  echo "$ac_t"none 1>&6
else
  echo "$ac_t""$ac_cv_prog_cc_pic" 1>&6

  # Check to make sure the pic_flag actually works.
  echo $ac_n "checking if $compiler PIC flag $ac_cv_prog_cc_pic works... $ac_c" 1>&6
  echo "$progname:687:checking that $compiler PIC flag $ac_cv_prog_cc_pic works." 1>&5
  if test "X${ac_cv_prog_cc_pic_works+set}" = Xset && \
     test "X${ac_cv_prog_cc_pic_works}" != X; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
    ac_cv_prog_cc_pic_works=yes
    $rm conftest*
    echo $lt_simple_compile_test_code > conftest.$ac_ext
    save_CFLAGS="$CFLAGS"
    CFLAGS="$CFLAGS $ac_cv_prog_cc_pic -DPIC"
    if { (eval echo $progname:697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
      # Append any warnings to the config.log.
      cat conftest.err 1>&5

      case $host_os in
      hpux9* | hpux10* | hpux11*)
        # On HP-UX, both CC and GCC only warn that PIC is supported... then
        # they create non-PIC objects.  So, if there were any warnings, we
        # assume that PIC is not supported.
        if test -s conftest.err; then
          ac_cv_prog_cc_pic_works=no
          ac_cv_prog_cc_can_build_shared=no
          ac_cv_prog_cc_pic=
        else
          ac_cv_prog_cc_pic_works=yes
          ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"
        fi
        ;;
      *)
        ac_cv_prog_cc_pic_works=yes
        ac_cv_prog_cc_pic=" $ac_cv_prog_cc_pic"
        ;;
      esac
    else
      # Append any errors to the config.log.
      cat conftest.err 1>&5
      ac_cv_prog_cc_pic_works=no
      ac_cv_prog_cc_can_build_shared=no
      ac_cv_prog_cc_pic=
    fi
    CFLAGS="$save_CFLAGS"
    $rm conftest*
  fi
  # Belt *and* braces to stop my trousers falling down:
  if test "X$ac_cv_prog_cc_pic_works" = Xno; then
    ac_cv_prog_cc_pic=
    ac_cv_prog_cc_can_build_shared=no
  fi
  echo "$ac_t""$ac_cv_prog_cc_pic_works" 1>&6
fi

# Check for any special shared library compilation flags.
if test -n "$ac_cv_prog_cc_shlib"; then
  echo "$progname: warning: \`$CC' requires \`$ac_cv_prog_cc_shlib' to build shared libraries" 1>&2
  if echo "$old_CC $old_CFLAGS " | egrep -e "[  ]$ac_cv_prog_cc_shlib[  ]" >/dev/null; then :
  else
    echo "$progname: add \`$ac_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
    ac_cv_prog_cc_can_build_shared=no
  fi
fi

echo $ac_n "checking if $compiler static flag $ac_cv_prog_cc_static works... $ac_c" 1>&6
echo "$progname:749: checking if $compiler static flag $ac_cv_prog_cc_static works" >&5
if test "X${ac_cv_prog_cc_static_works+set}" = Xset && \
   test "X${ac_cv_prog_cc_static_works}" != X; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  $rm conftest*
  echo $lt_simple_link_test_code > conftest.$ac_ext
  save_LDFLAGS="$LDFLAGS"
  LDFLAGS="$LDFLAGS $ac_cv_prog_cc_static"
  if { (eval echo $progname:758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
    ac_cv_prog_cc_static_works=yes
  else
    ac_cv_prog_cc_static_works=no
    ac_cv_prog_cc_static=
  fi
  LDFLAGS="$save_LDFLAGS"
  $rm conftest*
fi
# Belt *and* braces to stop my trousers falling down:
if test "X$ac_cv_prog_cc_static_works" = Xno; then
  ac_cv_prog_cc_static=
fi
echo "$ac_t""$ac_cv_prog_cc_static_works" 1>&6
pic_flag="$ac_cv_prog_cc_pic"
special_shlib_compile_flags="$ac_cv_prog_cc_shlib"
wl="$ac_cv_prog_cc_wl"
link_static_flag="$ac_cv_prog_cc_static"
no_builtin_flag="$ac_cv_prog_cc_no_builtin"
can_build_shared="$ac_cv_prog_cc_can_build_shared"

# find the maximum length of command line arguments
echo "$progname:780: finding the maximum length of command line arguments" 1>&5
echo $ac_n "finding the maximum length of command line arguments... $ac_c" 1>&6
if test "${lt_cv_sys_max_cmd_len+set}" = set; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  i=0
  testring="ABCD"
  # If test is not a shell built-in, we'll probably end up computing a
  # maximum length that is only half of the actual maximum length, but
  # we can't tell.
  while test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
             = "XX$testring" &&
          new_result=`expr "X$testring" : ".*" 2>&1` &&
          lt_cv_sys_max_cmd_len=$new_result &&
          test $i != 17 # 1/2 MB should be enough
  do
    i=`expr $i + 1`
    testring=$testring$testring
  done
  testring=
  # add a significant safety factor because C++ compilers can tack on massive amounts
  # of additional arguments before passing them to the linker.  1/4 should be good.
  len=`expr $lt_cv_sys_max_cmd_len \/ 4`
  lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len - $len`
fi
echo "$progname:@lineno@: result: $lt_cv_sys_max_cmd_len" 1>&5
echo "${ac_t}$lt_cv_sys_max_cmd_len" 1>&6

if test -n $lt_cv_sys_max_cmd_len ; then
  max_cmd_len=$lt_cv_sys_max_cmd_len
else
  max_cmd_len=none
fi

# Check to see if options -o and -c are simultaneously supported by compiler
echo $ac_n "checking if $compiler supports -c -o file.$objext... $ac_c" 1>&6
if test "${lt_cv_compiler_c_o+set}" = set; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  $rm -r conftest 2>/dev/null
  mkdir conftest
  cd conftest
  $rm conftest*
  echo $lt_simple_compile_test_code > conftest.$ac_ext
  mkdir out
  # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
  # that will create temporary files in the current directory regardless of
  # the output directory.  Thus, making CWD read-only will cause this test
  # to fail, enabling locking or at least warning the user not to do parallel
  # builds.
  chmod -w .
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -o out/conftest2.$objext"
  echo "$progname:833: checking if $compiler supports -c -o file.$objext" >&5
  if { (eval echo $progname:834: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$objext; then

    # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
      if test -s out/conftest.err; then
        lt_cv_compiler_c_o=no
      else
        lt_cv_compiler_c_o=yes
      fi
  else
    # Append any errors to the config.log.
    cat out/conftest.err 1>&5
    lt_cv_compiler_c_o=no
  fi
  CFLAGS="$save_CFLAGS"
  chmod u+w .
  $rm conftest* out/*
  rmdir out
  cd ..
  rmdir conftest
  $rm -r conftest 2>/dev/null
fi
compiler_c_o=$lt_cv_compiler_c_o
echo "${ac_t}$compiler_c_o" 1>&6

# Check to see if we can do hard links to lock some files if needed
hard_links="nottested"
if test "$compiler_c_o" = no && test "$need_locks" != no; then
  # do not overwrite the value of need_locks provided by the user
  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
  hard_links=yes
  $rm conftest*
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  touch conftest.a
  ln conftest.a conftest.b 2>&5 || hard_links=no
  ln conftest.a conftest.b 2>/dev/null && hard_links=no
  echo "$ac_t$hard_links" 1>&6
  $rm conftest*
  if test "$hard_links" = no; then
    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
    need_locks=warn
  fi
else
  need_locks=no
fi

if test "$with_gcc" = yes; then
  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
  $rm conftest*
  echo $lt_simple_compile_test_code > conftest.$ac_ext
  save_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
  echo "$progname:887: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
  if { (eval echo $progname:888: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then

    # The compiler can only warn and ignore the option if not recognized
    # So say no if there are warnings
      if test -s conftest.err; then
        echo "$ac_t"no 1>&6
        compiler_rtti_exceptions=no
      else
        echo "$ac_t"yes 1>&6
        compiler_rtti_exceptions=yes
      fi
  else
    # Append any errors to the config.log.
    cat conftest.err 1>&5
    compiler_rtti_exceptions=no
    echo "$ac_t"no 1>&6
  fi
  CFLAGS="$save_CFLAGS"
  $rm conftest*

  if test "$compiler_rtti_exceptions" = "yes"; then
    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
  else
    no_builtin_flag=' -fno-builtin'
  fi
  
fi

# See if the linker supports building shared libraries.
echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6

echo "$ac_t$ld_shlibs" 1>&6
test "$ld_shlibs" = no && can_build_shared=no

# Check hardcoding attributes.
echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
   test -n "$runpath_var"; then

  # We can hardcode non-existant directories.
  if test "$hardcode_direct" != no &&
     # If the only mechanism to avoid hardcoding is shlibpath_var, we
     # have to relink, otherwise we might link with an installed library
     # when we should be linking with a yet-to-be-installed one
     ## test "$hardcode_shlibpath_var" != no &&
     test "$hardcode_minus_L" != no; then
    # Linking always hardcodes the temporary library directory.
    hardcode_action=relink
  else
    # We can link without hardcoding, and we can hardcode nonexisting dirs.
    hardcode_action=immediate
  fi
else
  # We cannot hardcode anything, or else we can only hardcode existing
  # directories.
  hardcode_action=unsupported
fi
echo "$ac_t$hardcode_action" 1>&6

echo $ac_n "checking whether stripping libraries is possible... $ac_c" 1>&6
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
  echo "${ac_t}yes" 1>&6
else
  echo "${ac_t}no" 1>&6
fi

case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
test -z "$deplibs_check_method" && deplibs_check_method=unknown

# PORTME Fill in your ld.so characteristics
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"

echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
case $host_os in
aix3*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix $libname.a'
  shlibpath_var=LIBPATH

  # AIX 3 has no versioning support, so we append a major version to the name.
  soname_spec='${libname}${release}.so$major'
  ;;

aix4* | aix5*)
  version_type=linux
  if test "$host_cpu" = ia64; then
    # AIX 5 supports IA64
    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
    shlibpath_var=LD_LIBRARY_PATH
  else
    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
    # soname into executable. Probably we can add versioning support to
    # collect2, so additional links can be useful in future.
    # We preserve .a as extension for shared libraries though AIX4.2
    # and later linker supports .so
    if test "$aix_use_runtimelinking" = yes; then
      # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
      # lib<name>.a to let people know that these are not typical AIX shared libraries.
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
    else
      # We preserve .a as extension for shared libraries though AIX4.2
      # and later when we are not doing run time linking.
      library_names_spec='${libname}${release}.a $libname.a'
      soname_spec='${libname}${release}.so$major'
    fi
    # If we're using GNU nm, then we don't want the "-C" option.
    # -C means demangle to AIX nm, but means don't demangle with GNU nm
    if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then
      export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
    else
      export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
    fi
    shlibpath_var=LIBPATH
    deplibs_check_method=pass_all
    case $host_os in
    aix4 | aix4.[01] | aix4.[01].*)
      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
           echo ' yes '
           echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
        :
      else
        # With GCC up to 2.95.x, collect2 would create an import file
        # for dependence libraries.  The import file would start with
        # the line `#! .'.  This would cause the generated library to
        # depend on `.', always an invalid library.  This was fixed in
        # development snapshots of GCC prior to 3.0.
        can_build_shared=no
      fi
      ;;
    esac
  fi
  ;;

amigaos*)
  library_names_spec='$libname.ixlibrary $libname.a'
  # Create ${libname}_ixlibrary.a entries in /sys/libs.
  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
  ;;

beos*)
  library_names_spec='${libname}.so'
  dynamic_linker="$host_os ld.so"
  shlibpath_var=LIBRARY_PATH
  lt_cv_dlopen="load_add_on"
  lt_cv_dlopen_libs=
  lt_cv_dlopen_self=yes
  ;;

bsdi4*)
  version_type=linux
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
  export_dynamic_flag_spec=-rdynamic
  # the default ld.so.conf also contains /usr/contrib/lib and
  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
  # libtool to hard-code these into programs
  ;;

cygwin* | mingw* | pw32*)
  version_type=windows
  need_version=no
  need_lib_prefix=no
  case $with_gcc,$host_os in
  yes,cygwin*)
    library_names_spec='$libname.dll.a'
    soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
    postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i; echo \$dlname'\''`~
      dldir=$destdir/`dirname \$dlpath`~
      test -d \$dldir || mkdir -p \$dldir~
      $install_prog .libs/$dlname \$dldir/$dlname'
    postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~
      dlpath=$dir/\$dldll; $rm \$dlpath'
    ;;
  yes,mingw*)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
    sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
    ;;
  yes,pw32*)
    library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
;;
  *)
    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
    ;;
  esac
  dynamic_linker='Win32 ld.exe'
  # FIXME: first we should search . and the directory the executable is in
  shlibpath_var=PATH
  lt_cv_dlopen="LoadLibrary"
  lt_cv_dlopen_libs=
  ;;

darwin* | rhapsody*)
  dynamic_linker="$host_os dyld"
  lt_cv_dlopen="dyld"
  lt_cv_dlopen_libs=
  lt_cv_dlopen_self=yes
  version_type=darwin
  need_lib_prefix=no
  need_version=no
  # Disable shared library build on OS-X older than 10.3.
  case $host_os in
      darwin[1-6]*)
          can_build_shared=no
          ;;
      darwin7*)
          can_build_shared=yes
          ;;
  esac
  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
  soname_spec='${libname}${release}${major}$shared_ext'
  shlibpath_overrides_runpath=yes
  shlibpath_var=DYLD_LIBRARY_PATH
  shrext='$(test .$module = .yes && echo .so || echo .dylib)'
  sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
  ;;

freebsd1*)
  dynamic_linker=no
  ;;

freebsd*)
  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo elf`
  version_type=freebsd-$objformat
  case $version_type in
    freebsd-elf*)
      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
      need_version=no
      need_lc=no
      need_lib_prefix=no
      ;;
    freebsd-*)
      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
      need_version=yes
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
  freebsd2*)
    shlibpath_overrides_runpath=yes
    ;;
  *)
    shlibpath_overrides_runpath=no
    hardcode_into_libs=yes
    ;;
  esac
  ;;

gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  hardcode_into_libs=yes
  ;;

kfreebsd*-gnu | knetbsd*-gnu)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  ;;

hpux9* | hpux10* | hpux11*)
  # Give a soname corresponding to the major version so that dld.sl refuses to
  # link against other versions.
  version_type=sunos
  need_lib_prefix=no
  need_version=no
  case "$host_cpu" in
  ia64*)
    dynamic_linker="$host_os dld.so"
    shlibpath_var=LD_LIBRARY_PATH
    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
    soname_spec='${libname}${release}.so$major'
    shlibpath_var=LD_LIBRARY_PATH
    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
    if test "X$HPUX_IA64_MODE" = X32; then
      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
    else
      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
    fi
    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
    ;;
  *)
    dynamic_linker="$host_os dld.sl"
    shlibpath_var=SHLIB_PATH
    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
    library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
    soname_spec='${libname}${release}.sl$major'
    ;;
  esac
  # HP-UX runs *really* slowly unless shared libraries are mode 555.
  postinstall_cmds='chmod 555 $lib'
  ;;

irix5* | irix6*)
  if test "$with_gnu_ld" = yes; then
    version_type=linux
  else
    version_type=irix
  fi
  need_lib_prefix=no
  need_version=no
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
  case $host_os in
  irix5*)
    libsuff= shlibsuff=
    ;;
  *)
    case $LD in # libtool.m4 will add one of these switches to LD
    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
      libsuff= shlibsuff= libmagic=32-bit;;
    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
      libsuff=32 shlibsuff=N32 libmagic=N32;;
    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
      libsuff=64 shlibsuff=64 libmagic=64-bit;;
    *) libsuff= shlibsuff= libmagic=never-match;;
    esac
    ;;
  esac
  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
  shlibpath_overrides_runpath=no
  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
  ;;

# No shared lib support for Linux oldld, aout, or coff.
linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
  dynamic_linker=no
  ;;

# This must be Linux ELF.
linux-gnu*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  # This implies no fast_install, which is unacceptable.
  # Some rework will be needed to allow for fast_install
  # before this can be enabled.
  hardcode_into_libs=yes

  # We used to test for /lib/ld.so.1 and disable shared libraries on
  # powerpc, because MkLinux only supported shared libraries with the
  # GNU dynamic linker.  Since this was broken with cross compilers,
  # most powerpc-linux boxes support dynamic linking these days and
  # people can always --disable-shared, the test was removed, and we
  # assume the GNU/Linux dynamic linker is in use.
  dynamic_linker='GNU/Linux ld.so'
  ;;

netbsd*)
  need_lib_prefix=no
  need_version=no
  version_type=sunos
  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
    dynamic_linker='NetBSD (a.out) ld.so'
  else
    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
    soname_spec='${libname}${release}.so$major'
    dynamic_linker='NetBSD ld.elf_so'
  fi
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  ;;

newsos6)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  ;;

openbsd*)
  version_type=sunos
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
    need_version=no
  fi
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

os2*)
  libname_spec='$name'
  need_lib_prefix=no
  library_names_spec='$libname.dll $libname.a'
  dynamic_linker='OS/2 ld.exe'
  shlibpath_var=LIBPATH
  ;;

osf3* | osf4* | osf5*)
  version_type=osf
  need_version=no
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
  ;;

sco3.2v5*)
  version_type=osf
  soname_spec='${libname}${release}.so$major'
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

solaris*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  hardcode_into_libs=yes
  # ldd complains unless libraries are executable
  postinstall_cmds='chmod +x $lib'
  ;;

sunos4*)
  version_type=sunos
  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=yes
  if test "$with_gnu_ld" = yes; then
    need_lib_prefix=no
  fi
  need_version=yes
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  case $host_vendor in
    motorola)
      need_lib_prefix=no
      need_version=no
      shlibpath_overrides_runpath=no
      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
      ;;
  esac
  ;;

tpf*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  shlibpath_overrides_runpath=no
  hardcode_into_libs=yes
  dynamic_linker='GNU/Linux ld.so'
  ;;

uts4*)
  version_type=linux
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

dgux*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
  soname_spec='${libname}${release}.so$major'
  shlibpath_var=LD_LIBRARY_PATH
  ;;

sysv4*MP*)
  if test -d /usr/nec ;then
    version_type=linux
    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
    soname_spec='$libname.so.$major'
    shlibpath_var=LD_LIBRARY_PATH
  fi
  ;;

*)
  dynamic_linker=no
  ;;
esac
echo "$ac_t$dynamic_linker" 1>&6
test "$dynamic_linker" = no && can_build_shared=no

# Check for command to grab the raw symbol name followed by C symbol from nm.
echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6

# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'

# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'

# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'

# Transform an extracted symbol line into a proper C declaration
global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"

# Define system-specific variables.
case $host_os in
aix*)
  symcode='[BCDT]'
  ;;
cygwin* | mingw* | pw32*)
  symcode='[ABCDGISTW]'
  ;;
hpux*) # Its linker distinguishes data from code symbols
  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
  ;;
irix*)
  symcode='[BCDEGRST]'
  ;;
solaris* | sysv5*)
  symcode='[BDT]'
  ;;
sysv4)
  symcode='[DFNSTU]'
  ;;
esac

# Handle CRLF in mingw tool chain
opt_cr=
case $host_os in
mingw*)
  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
  ;;
esac

# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
  symcode='[ABCDGISTW]'
fi

# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do

  # Write the raw and C identifiers.
  global_symbol_pipe="sed -n -e 's/^.*[         ]\($symcode$symcode*\)[         ][      ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"

  # Check to see that the pipe works correctly.
  pipe_works=no
  $rm conftest*
  cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF

  echo "$progname:1431: checking if global_symbol_pipe works" >&5
  if { (eval echo $progname:1432: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
    # Now try to grab the symbols.
    nlist=conftest.nm
    if { echo "$progname:1435: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then

      # Try sorting and uniquifying the output.
      if sort "$nlist" | uniq > "$nlist"T; then
        mv -f "$nlist"T "$nlist"
      else
        rm -f "$nlist"T
      fi

      # Make sure that we snagged all the symbols we need.
      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
        if egrep ' nm_test_func$' "$nlist" >/dev/null; then
          cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif

EOF
          # Now generate the symbol file.
          eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext'

          cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif

/* The mapping between symbol names and symbols. */
const struct {
  const char *name;
  lt_ptr_t address;
}
lt_preloaded_symbols[] =
{
EOF
          sed "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
          cat <<\EOF >> conftest.$ac_ext
  {0, (lt_ptr_t) 0}
};

#ifdef __cplusplus
}
#endif
EOF
          # Now try linking the two files.
          mv conftest.$objext conftstm.$objext
          save_LIBS="$LIBS"
          save_CFLAGS="$CFLAGS"
          LIBS="conftstm.$objext"
          CFLAGS="$CFLAGS$no_builtin_flag"
          if { (eval echo $progname:1487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
            pipe_works=yes
          else
            echo "$progname: failed program was:" >&5
            cat conftest.$ac_ext >&5
          fi
          LIBS="$save_LIBS"
        else
          echo "cannot find nm_test_func in $nlist" >&5
        fi
      else
        echo "cannot find nm_test_var in $nlist" >&5
      fi
    else
      echo "cannot run $global_symbol_pipe" >&5
    fi
  else
    echo "$progname: failed program was:" >&5
    cat conftest.$ac_ext >&5
  fi
  $rm conftest* conftst*

  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
    break
  else
    global_symbol_pipe=
  fi
done
if test "$pipe_works" = yes; then
  echo "${ac_t}ok" 1>&6
else
  echo "${ac_t}failed" 1>&6
fi

if test -z "$global_symbol_pipe"; then
  global_symbol_to_cdecl=
fi

# Report the final consequences.
echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6

# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
# configure.in, otherwise build static only libraries.
case $host_os in
cygwin* | mingw* | pw32* | os2*)
  if test x$can_build_shared = xyes; then
    test x$enable_win32_dll = xno && can_build_shared=no
    echo "checking if package supports dlls... $can_build_shared" 1>&6
  fi
;;
esac

echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
test "$can_build_shared" = "no" && enable_shared=no

# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
  test "$enable_shared" = yes && enable_static=no
  if test -n "$RANLIB"; then
    archive_cmds="$archive_cmds~\$RANLIB \$lib"
    postinstall_cmds='$RANLIB $lib'
  fi
  ;;

aix4* | aix5*)
  test "$enable_shared" = yes && enable_static=no
  ;;
esac

echo "$ac_t$enable_shared" 1>&6

# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes

echo "checking whether to build static libraries... $enable_static" 1>&6

if test "$hardcode_action" = relink; then
  # Fast installation is not supported
  enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
     test "$enable_shared" = no; then
  # Fast installation is not necessary
  enable_fast_install=needless
fi

variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$with_gcc" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi

# Check whether we must set pic_mode to default
test -z "$pic_flag" && pic_mode=default

if test "x$enable_dlopen" != xyes; then
  enable_dlopen=unknown
  enable_dlopen_self=unknown
  enable_dlopen_self_static=unknown
else
if test "X${lt_cv_dlopen+set}" != Xset; then
  lt_cv_dlopen=no lt_cv_dlopen_libs=
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "$progname:1591: checking for dlopen in -ldl" >&5
if test "X${ac_cv_lib_dl_dlopen+set}" = Xset; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1598 "ltconfig"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo $progname:1611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_lib_dl_dlopen=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_lib_dl_dlopen=no
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if test "X$ac_cv_lib_dl_dlopen" = Xyes; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen""... $ac_c" 1>&6
echo "$progname:1630: checking for dlopen" >&5
if test "X${ac_cv_func_dlopen+set}" = Xset; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1635 "ltconfig"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char dlopen(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char dlopen();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_dlopen) || defined (__stub___dlopen)
choke me
#else
dlopen();
#endif

; return 0; }
EOF
if { (eval echo $progname:1660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_func_dlopen=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_func_dlopen=no
fi
rm -f conftest*
fi
if test "X$ac_cv_func_dlopen" = Xyes; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
echo "$progname:1677: checking for dlopen in -lsvld" >&5
if test "X${ac_cv_lib_svld_dlopen+set}" = Xset; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsvld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1684 "ltconfig"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo $progname:1697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_lib_svld_dlopen=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_lib_svld_dlopen=no
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if test "X$ac_cv_lib_svld_dlopen" = Xyes; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
echo "$progname:1716: checking for dld_link in -ldld" >&5
if test "X${ac_cv_lib_dld_dld_link+set}" = Xset; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1723 "ltconfig"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char dld_link();

int main() {
dld_link()
; return 0; }
EOF
if { (eval echo $progname:1736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_lib_dld_dld_link=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_lib_dld_dld_link=no
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if test "X$ac_cv_lib_dld_dld_link" = Xyes; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for shl_load""... $ac_c" 1>&6
echo "$progname:1755: checking for shl_load" >&5
if test "X${ac_cv_func_shl_load+set}" = Xset; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1760 "ltconfig"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char shl_load(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char shl_load();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_shl_load) || defined (__stub___shl_load)
choke me
#else
shl_load();
#endif

; return 0; }
EOF
if { (eval echo $progname:1785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_func_shl_load=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_func_shl_load=no
fi
rm -f conftest*
fi

if test "X$ac_cv_func_shl_load" = Xyes; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="shl_load"
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
echo "$progname:1803: checking for shl_load in -ldld" >&5
if test "X${ac_cv_lib_dld_shl_load+set}" = Xset; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1810 "ltconfig"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
#ifdef __cplusplus
extern "C"
#endif
char shl_load();

int main() {
shl_load()
; return 0; }
EOF
if { (eval echo $progname:1824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_lib_dld_shl_load=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_lib_dld_shl_load=no
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if test "X$ac_cv_lib_dld_shl_load" = Xyes; then
  echo "$ac_t""yes" 1>&6
  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
else
  echo "$ac_t""no" 1>&6
fi


fi


fi


fi


fi

fi

fi

  if test "x$lt_cv_dlopen" != xno; then
    enable_dlopen=yes
  else
    enable_dlopen=no
  fi

  case $lt_cv_dlopen in
  dlopen)
for ac_hdr in dlfcn.h; do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "$progname:1871: checking for $ac_hdr" >&5
if eval "test \"`echo 'X$''{'ac_cv_header_$ac_safe'+set}'`\" = Xset"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1876 "ltconfig"
#include <$ac_hdr>
int fnord = 0;
int main () { return(0); }
EOF
ac_try="$ac_compile >/dev/null 2>conftest.out"
{ (eval echo $progname:1882: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
done

    if test "x$ac_cv_header_dlfcn_h" = xyes; then
      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
    fi
    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
    LIBS="$lt_cv_dlopen_libs $LIBS"

  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
echo "$progname:1910: checking whether a program can dlopen itself" >&5
if test "X${lt_cv_dlopen_self+set}" = Xset; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    lt_cv_dlopen_self=cross
  else
    cat > conftest.$ac_ext <<EOF
#line 1918 "ltconfig"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
# define LTDL_GLOBAL    RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
#  define LTDL_GLOBAL   DL_GLOBAL
# else
#  define LTDL_GLOBAL   0
# endif
#endif

/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LTDL_LAZY_OR_NOW
# ifdef RTLD_LAZY
#  define LTDL_LAZY_OR_NOW      RTLD_LAZY
# else
#  ifdef DL_LAZY
#   define LTDL_LAZY_OR_NOW     DL_LAZY
#  else
#   ifdef RTLD_NOW
#    define LTDL_LAZY_OR_NOW    RTLD_NOW
#   else
#    ifdef DL_NOW
#     define LTDL_LAZY_OR_NOW   DL_NOW
#    else
#     define LTDL_LAZY_OR_NOW   0
#    endif
#   endif
#  endif
# endif
#endif

void fnord() { int i=42; }
int main() {
    void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
               if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); }

EOF
if { (eval echo $progname:1965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
  lt_cv_dlopen_self=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  lt_cv_dlopen_self=no
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$lt_cv_dlopen_self" 1>&6

  if test "$lt_cv_dlopen_self" = yes; then
    LDFLAGS="$LDFLAGS $link_static_flag"
  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
echo "$progname:1984: checking whether a statically linked program can dlopen itself" >&5
if test "X${lt_cv_dlopen_self_static+set}" = Xset; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
    lt_cv_dlopen_self_static=cross
  else
    cat > conftest.$ac_ext <<EOF
#line 1992 "ltconfig"

#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif

#include <stdio.h>

#ifdef RTLD_GLOBAL
# define LTDL_GLOBAL    RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
#  define LTDL_GLOBAL   DL_GLOBAL
# else
#  define LTDL_GLOBAL   0
# endif
#endif

/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
   find out it does not work in some platform. */
#ifndef LTDL_LAZY_OR_NOW
# ifdef RTLD_LAZY
#  define LTDL_LAZY_OR_NOW      RTLD_LAZY
# else
#  ifdef DL_LAZY
#   define LTDL_LAZY_OR_NOW     DL_LAZY
#  else
#   ifdef RTLD_NOW
#    define LTDL_LAZY_OR_NOW    RTLD_NOW
#   else
#    ifdef DL_NOW
#     define LTDL_LAZY_OR_NOW   DL_NOW
#    else
#     define LTDL_LAZY_OR_NOW   0
#    endif
#   endif
#  endif
# endif
#endif

void fnord() { int i=42; }
int main() {
    void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
    if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); }

EOF
if { (eval echo $progname:2039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
  lt_cv_dlopen_self_static=yes
else
  echo "$progname: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  lt_cv_dlopen_self_static=no
fi
rm -fr conftest*
fi

fi

echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
fi
    ;;
  esac

  case $lt_cv_dlopen_self in
  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
  *) enable_dlopen_self=unknown ;;
  esac

  case $lt_cv_dlopen_self_static in
  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
  *) enable_dlopen_self_static=unknown ;;
  esac
fi

# Copy echo and quote the copy, instead of the original, because it is
# used later.
ltecho="$echo"
if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
fi
LTSHELL="$SHELL"

LTCONFIG_VERSION="$VERSION"

# Only quote variables if we're using ltmain.sh.
case $ltmain in
*.sh)
  # Now quote all the things that may contain metacharacters.
  for var in ltecho old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \
    old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \
    old_LN_S old_NM old_RANLIB old_STRIP \
    old_AS old_DLLTOOL old_OBJDUMP \
    old_OBJEXT old_EXEEXT old_reload_flag \
    old_deplibs_check_method old_file_magic_cmd \
    AR AR_FLAGS CC LTCC LD LN_S NM LTSHELL LTCONFIG_VERSION \
    reload_flag reload_cmds wl \
    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
    library_names_spec soname_spec \
    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \
    postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \
    predep_objects postdep_objects predeps postdeps compiler_lib_search_path \
    old_striplib striplib file_magic_cmd export_symbols_cmds \
    deplibs_check_method allow_undefined_flag no_undefined_flag \
    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
    hardcode_libdir_flag_spec hardcode_libdir_separator  \
    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
    compiler_c_o need_locks exclude_expsyms include_expsyms file_list_spec; do

    case $var in
    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
    old_postinstall_cmds | old_postuninstall_cmds | \
    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
    extract_expsyms_cmds | old_archive_from_expsyms_cmds | \
    postinstall_cmds | postuninstall_cmds | \
    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
      # Double-quote double-evaled strings.
      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ### testsuite: skip nested quoting test
      ;;
    *)
      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ### testsuite: skip nested quoting test
      ;;
    esac
  done

  case $ltecho in
  *'\$0 --fallback-echo"')
    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
    ;;
  esac

  if test -z "$tagname"; then
    trap "$rm \"$ofile\"; exit 1" 1 2 15
    echo "creating $ofile"
    $rm "$ofile"
    cat <<EOF > "$ofile"
#! $SHELL

# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
#
# Copyright (C) 1996-2000 Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="sed -e s/^X//"

# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi

# The names of the tagged configurations supported by this script.
available_tags=

### BEGIN LIBTOOL CONFIG
EOF
  else
    echo "appending configuration tag \"$tagname\" to $ofile"
    echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
  fi
  cfgfile="$ofile"
  ;;

*)
  # Double-quote the variables that need it (for aesthetics).
  for var in old_AR old_AR_FLAGS old_CC old_LTCC old_CFLAGS old_CPPFLAGS \
    old_MAGIC_CMD old_LD old_LDFLAGS old_LIBS \
    old_LN_S old_NM old_RANLIB old_STRIP \
    old_AS old_DLLTOOL old_OBJDUMP \
    old_OBJEXT old_EXEEXT old_reload_flag \
    old_deplibs_check_method old_file_magic_cmd; do
    eval "$var=\\\"\$var\\\""
  done

  # Just create a config file.
  cfgfile="$ofile.cfg"
  if test -z "$tagname"; then
    trap "$rm \"$cfgfile\"; exit 1" 1 2 15
    echo "creating $cfgfile"
    $rm "$cfgfile"
    cat <<EOF > "$cfgfile"
# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)

### BEGIN LIBTOOL CONFIG
EOF
  else
    echo "appending to $cfgfile"
    echo "### BEGIN LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
  fi
  ;;
esac

cat <<EOF >> "$cfgfile"
# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# AR=$old_AR AR_FLAGS=$old_AR_FLAGS LTCC=$old_LTCC CC=$old_CC \\
# CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
# MAGIC_CMD=$old_MAGIC_CMD LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
# LN_S=$old_LN_S NM=$old_NM RANLIB=$old_RANLIB STRIP=$old_STRIP \\
# AS=$old_AS DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP \\
# objext=$old_OBJEXT exeext=$old_EXEEXT reload_flag=$old_reload_flag \\
# deplibs_check_method=$old_deplibs_check_method \\
# file_magic_cmd=$old_file_magic_cmd \\
#   $0$ltconfig_args
#
# Compiler and other test output produced by $progname, useful for
# debugging $progname, is in ./config.log if it exists.

# The version of $progname that generated this script.
LTCONFIG_VERSION=$LTCONFIG_VERSION

# Shell to use when invoking shell scripts.
SHELL=$LTSHELL

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$need_lc

# Whether or not to build static libraries.
build_old_libs=$enable_static

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# The host system.
host_alias=$host_alias
host=$host

# An echo program that does not interpret backslashes.
echo=$ltecho

# The archiver.
AR=$AR
AR_FLAGS=$AR_FLAGS

# A C compiler.
LTCC=$LTCC

# A language-specific compiler.
CC=$CC

# Is the compiler the GNU C compiler?
with_gcc=$with_gcc

# The linker used to build libraries.
LD=$LD

# Whether we need hard or soft links.
LN_S=$LN_S

# A BSD-compatible nm program.
NM=$NM

# A symbol stripping program
STRIP=$STRIP

# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD

# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"

# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"

# Used on cygwin: assembler.
AS="$AS"

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# How to create reloadable object files.
reload_flag=$reload_flag
reload_cmds=$reload_cmds

# How to pass a linker flag through the compiler.
wl=$wl

# Object file suffix (normally "o").
objext="$objext"

# Old archive suffix (normally "a").
libext="$libext"

# Shared library suffix (normally ".so").
shrext='$shrext'

# Executable file suffix (normally "").
exeext="$exeext"

# Additional compiler flags for building library objects.
pic_flag=$pic_flag
pic_mode=$pic_mode

# What is the maximum length of a command?
max_cmd_len=$max_cmd_len

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$compiler_c_o

# Must we lock files when doing compilation ?
need_locks=$need_locks

# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Compiler flag to prevent dynamic linking.
link_static_flag=$link_static_flag

# Compiler flag to turn off builtin functions.
no_builtin_flag=$no_builtin_flag

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$whole_archive_flag_spec

# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$thread_safe_flag_spec

# Library versioning type.
version_type=$version_type

# Format of library name prefix.
libname_spec=$libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$soname_spec

# Commands used to build and install an old-style archive.
RANLIB=$RANLIB
old_archive_cmds=$old_archive_cmds
old_postinstall_cmds=$old_postinstall_cmds
old_postuninstall_cmds=$old_postuninstall_cmds

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$old_archive_from_new_cmds

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$old_archive_from_expsyms_cmds

# Commands used to build and install a shared archive.
archive_cmds=$archive_cmds
archive_expsym_cmds=$archive_expsym_cmds
postinstall_cmds=$postinstall_cmds
postuninstall_cmds=$postuninstall_cmds

# Commands to strip libraries.
old_striplib=$old_striplib
striplib=$striplib

# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=$predep_objects

# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=$postdep_objects

# Dependencies to place before the objects being linked to create a
# shared library.
predeps=$predeps

# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=$postdeps

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$compiler_lib_search_path

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$deplibs_check_method

# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$file_magic_cmd

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$allow_undefined_flag

# Flag that forces no undefined symbols.
no_undefined_flag=$no_undefined_flag

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$finish_cmds

# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$finish_eval

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$global_symbol_pipe

# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$global_symbol_to_cdecl

# This is the shared library runtime path variable.
runpath_var=$runpath_var

# This is the shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec

# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$hardcode_libdir_separator

# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct

# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs

# Compile-time system search path for libraries
sys_lib_search_path_spec=$sys_lib_search_path_spec

# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec

# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"

# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols

# The commands to list exported symbols.
export_symbols_cmds=$export_symbols_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$extract_expsyms_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$exclude_expsyms

# Symbols that must always be exported.
include_expsyms=$include_expsyms

# Specify filename containing input files.
file_list_spec=$file_list_spec

# with_gnu_ld value
with_gnu_ld=$with_gnu_ld

EOF

if test -z "$tagname"; then
  echo '### END LIBTOOL CONFIG' >> "$ofile"
else
  echo "### END LIBTOOL TAG CONFIG: $tagname" >> "$ofile"
fi

case $ltmain in
*.sh)
  echo >> "$ofile"
  if test -z "$tagname"; then
    case $host_os in
    aix3*)
      cat <<\EOF >> "$ofile"

# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
EOF
      ;;
    esac
    case $host in
    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
      cat <<'EOF' >> "$ofile"
      # This is a source program that is used to create dlls on Windows
      # Don't remove nor modify the starting and closing comments
# /* ltdll.c starts here */
# #define WIN32_LEAN_AND_MEAN
# #include <windows.h>
# #undef WIN32_LEAN_AND_MEAN
# #include <stdio.h>
#
# #ifndef __CYGWIN__
# #  ifdef __CYGWIN32__
# #    define __CYGWIN__ __CYGWIN32__
# #  endif
# #endif
#
# #ifdef __cplusplus
# extern "C" {
# #endif
# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
# #ifdef __cplusplus
# }
# #endif
#
# #ifdef __CYGWIN__
# #include <cygwin/cygwin_dll.h>
# DECLARE_CYGWIN_DLL( DllMain );
# #endif
# HINSTANCE __hDllInstance_base;
#
# BOOL APIENTRY
# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
# {
#   __hDllInstance_base = hInst;
#   return TRUE;
# }
# /* ltdll.c ends here */
      # This is a source program that is used to create import libraries
      # on Windows for dlls which lack them. Don't remove nor modify the
      # starting and closing comments
# /* impgen.c starts here */
# /*   Copyright (C) 1999-2000 Free Software Foundation, Inc.
#
#  This file is part of GNU libtool.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program; if not, write to the Free Software
#  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#  */
#
#  #include <stdio.h>           /* for printf() */
#  #include <unistd.h>          /* for open(), lseek(), read() */
#  #include <fcntl.h>           /* for O_RDONLY, O_BINARY */
#  #include <string.h>          /* for strdup() */
#
#  /* O_BINARY isn't required (or even defined sometimes) under Unix */
#  #ifndef O_BINARY
#  #define O_BINARY 0
#  #endif
#
#  static unsigned int
#  pe_get16 (fd, offset)
#       int fd;
#       int offset;
#  {
#    unsigned char b[2];
#    lseek (fd, offset, SEEK_SET);
#    read (fd, b, 2);
#    return b[0] + (b[1]<<8);
#  }
#
#  static unsigned int
#  pe_get32 (fd, offset)
#      int fd;
#      int offset;
#  {
#    unsigned char b[4];
#    lseek (fd, offset, SEEK_SET);
#    read (fd, b, 4);
#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
#  }
#
#  static unsigned int
#  pe_as32 (ptr)
#       void *ptr;
#  {
#    unsigned char *b = ptr;
#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
#  }
#
#  int
#  main (argc, argv)
#      int argc;
#      char *argv[];
#  {
#      int dll;
#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
#      unsigned long export_rva, export_size, nsections, secptr, expptr;
#      unsigned long name_rvas, nexp;
#      unsigned char *expdata, *erva;
#      char *filename, *dll_name;
#
#      filename = argv[1];
#
#      dll = open(filename, O_RDONLY|O_BINARY);
#      if (dll < 1)
#       return 1;
#
#      dll_name = filename;
#
#      for (i=0; filename[i]; i++)
#       if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
#           dll_name = filename + i +1;
#
#      pe_header_offset = pe_get32 (dll, 0x3c);
#      opthdr_ofs = pe_header_offset + 4 + 20;
#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
#
#      if (num_entries < 1) /* no exports */
#       return 1;
#
#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
#      export_size = pe_get32 (dll, opthdr_ofs + 100);
#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
#      secptr = (pe_header_offset + 4 + 20 +
#             pe_get16 (dll, pe_header_offset + 4 + 16));
#
#      expptr = 0;
#      for (i = 0; i < nsections; i++)
#      {
#       char sname[8];
#       unsigned long secptr1 = secptr + 40 * i;
#       unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
#       unsigned long vsize = pe_get32 (dll, secptr1 + 16);
#       unsigned long fptr = pe_get32 (dll, secptr1 + 20);
#       lseek(dll, secptr1, SEEK_SET);
#       read(dll, sname, 8);
#       if (vaddr <= export_rva && vaddr+vsize > export_rva)
#       {
#           expptr = fptr + (export_rva - vaddr);
#           if (export_rva + export_size > vaddr + vsize)
#               export_size = vsize - (export_rva - vaddr);
#           break;
#       }
#      }
#
#      expdata = (unsigned char*)malloc(export_size);
#      lseek (dll, expptr, SEEK_SET);
#      read (dll, expdata, export_size);
#      erva = expdata - export_rva;
#
#      nexp = pe_as32 (expdata+24);
#      name_rvas = pe_as32 (expdata+32);
#
#      printf ("EXPORTS\n");
#      for (i = 0; i<nexp; i++)
#      {
#       unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
#       printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
#      }
#
#      return 0;
#  }
# /* impgen.c ends here */

EOF
    ;;
  esac


    # Append the ltmain.sh script.
    sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
    # We use sed instead of cat because bash on DJGPP gets confused if
    # if finds mixed CR/LF and LF-only lines.  Since sed operates in
    # text mode, it properly converts lines to CR/LF.  This bash problem
    # is reportedly fixed, but why not run on old versions too?

    chmod +x "$ofile"
  fi
  ;;

*)
  # Compile the libtool program.
  echo "FIXME: would compile $ltmain"
  ;;
esac

# Update the list of available tags.
if test -n "$tagname"; then

  # Extract list of available tagged configurations in $ofile.
  # Note that this assumes the entire list is on one line.
  available_tags=`grep "^available_tags=" $ofile | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`

  # Append the new tag name to the list of available tags.
  available_tags="$available_tags $tagname"

  # Now substitute the updated of available tags.
  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' ${ofile} > ${ofile}.new"; then
    mv ${ofile}.new ${ofile}
    chmod +x "$ofile"
  else
    rm -f ${ofile}.new
    echo "$progname: unable to update list of available tagged configurations."
    exit 1
  fi
fi

# Don't cache tagged configuration!
test -n "$cache_file" && test -z "$tagname" || exit 0

# AC_CACHE_SAVE
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

exit 0

# Local Variables:
# mode:shell-script
# sh-indentation:2
# End: