OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-6.8/] [gdb/] [breakpoint.c] - Rev 827

Go to most recent revision | Compare with Previous | Blame | View Log

/* Everything about breakpoints, for GDB.
 
   Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
   1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
   2008 Free Software Foundation, Inc.
 
   This file is part of GDB.
 
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3 of the License, or
   (at your option) any later version.
 
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
#include "defs.h"
#include <ctype.h>
#include "hashtab.h"
#include "symtab.h"
#include "frame.h"
#include "breakpoint.h"
#include "gdbtypes.h"
#include "expression.h"
#include "gdbcore.h"
#include "gdbcmd.h"
#include "value.h"
#include "command.h"
#include "inferior.h"
#include "gdbthread.h"
#include "target.h"
#include "language.h"
#include "gdb_string.h"
#include "demangle.h"
#include "annotate.h"
#include "symfile.h"
#include "objfiles.h"
#include "source.h"
#include "linespec.h"
#include "completer.h"
#include "gdb.h"
#include "ui-out.h"
#include "cli/cli-script.h"
#include "gdb_assert.h"
#include "block.h"
#include "solib.h"
#include "solist.h"
#include "observer.h"
#include "exceptions.h"
#include "memattr.h"
#include "ada-lang.h"
#include "top.h"
 
#include "gdb-events.h"
#include "mi/mi-common.h"
 
/* Prototypes for local functions. */
 
static void until_break_command_continuation (struct continuation_arg *arg);
 
static void catch_command_1 (char *, int, int);
 
static void enable_delete_command (char *, int);
 
static void enable_delete_breakpoint (struct breakpoint *);
 
static void enable_once_command (char *, int);
 
static void enable_once_breakpoint (struct breakpoint *);
 
static void disable_command (char *, int);
 
static void enable_command (char *, int);
 
static void map_breakpoint_numbers (char *, void (*)(struct breakpoint *));
 
static void ignore_command (char *, int);
 
static int breakpoint_re_set_one (void *);
 
static void clear_command (char *, int);
 
static void catch_command (char *, int);
 
static void watch_command (char *, int);
 
static int can_use_hardware_watchpoint (struct value *);
 
static void break_command_1 (char *, int, int);
 
static void mention (struct breakpoint *);
 
struct breakpoint *set_raw_breakpoint (struct symtab_and_line, enum bptype);
 
static void check_duplicates (struct breakpoint *);
 
static void breakpoint_adjustment_warning (CORE_ADDR, CORE_ADDR, int, int);
 
static CORE_ADDR adjust_breakpoint_address (CORE_ADDR bpaddr,
                                            enum bptype bptype);
 
static void describe_other_breakpoints (CORE_ADDR, asection *, int);
 
static void breakpoints_info (char *, int);
 
static void breakpoint_1 (int, int);
 
static bpstat bpstat_alloc (const struct bp_location *, bpstat);
 
static int breakpoint_cond_eval (void *);
 
static void cleanup_executing_breakpoints (void *);
 
static void commands_command (char *, int);
 
static void condition_command (char *, int);
 
static int get_number_trailer (char **, int);
 
void set_breakpoint_count (int);
 
typedef enum
  {
    mark_inserted,
    mark_uninserted
  }
insertion_state_t;
 
static int remove_breakpoint (struct bp_location *, insertion_state_t);
 
static enum print_stop_action print_it_typical (bpstat);
 
static enum print_stop_action print_bp_stop_message (bpstat bs);
 
typedef struct
  {
    enum exception_event_kind kind;
    int enable_p;
  }
args_for_catchpoint_enable;
 
static int watchpoint_check (void *);
 
static void maintenance_info_breakpoints (char *, int);
 
static void create_longjmp_breakpoint (char *);
 
static void create_overlay_event_breakpoint (char *);
 
static int hw_breakpoint_used_count (void);
 
static int hw_watchpoint_used_count (enum bptype, int *);
 
static void hbreak_command (char *, int);
 
static void thbreak_command (char *, int);
 
static void watch_command_1 (char *, int, int);
 
static void rwatch_command (char *, int);
 
static void awatch_command (char *, int);
 
static void do_enable_breakpoint (struct breakpoint *, enum bpdisp);
 
static void create_fork_vfork_event_catchpoint (int tempflag,
						char *cond_string,
						enum bptype bp_kind);
 
static void stop_command (char *arg, int from_tty);
 
static void stopin_command (char *arg, int from_tty);
 
static void stopat_command (char *arg, int from_tty);
 
static char *ep_find_event_name_end (char *arg);
 
static char *ep_parse_optional_if_clause (char **arg);
 
static char *ep_parse_optional_filename (char **arg);
 
static void create_exception_catchpoint (int tempflag, char *cond_string,
					 enum exception_event_kind ex_event,
					 struct symtab_and_line *sal);
 
static void catch_exception_command_1 (enum exception_event_kind ex_event, 
				       char *arg, int tempflag, int from_tty);
 
static void tcatch_command (char *arg, int from_tty);
 
static void ep_skip_leading_whitespace (char **s);
 
static int single_step_breakpoint_inserted_here_p (CORE_ADDR pc);
 
static void free_bp_location (struct bp_location *loc);
 
static void mark_breakpoints_out (void);
 
static struct bp_location *
allocate_bp_location (struct breakpoint *bpt, enum bptype bp_type);
 
static void
unlink_locations_from_global_list (struct breakpoint *bpt);
 
static int
is_hardware_watchpoint (struct breakpoint *bpt);
 
/* Prototypes for exported functions. */
 
/* If FALSE, gdb will not use hardware support for watchpoints, even
   if such is available. */
static int can_use_hw_watchpoints;
 
static void
show_can_use_hw_watchpoints (struct ui_file *file, int from_tty,
			     struct cmd_list_element *c,
			     const char *value)
{
  fprintf_filtered (file, _("\
Debugger's willingness to use watchpoint hardware is %s.\n"),
		    value);
}
 
/* If AUTO_BOOLEAN_FALSE, gdb will not attempt to create pending breakpoints.
   If AUTO_BOOLEAN_TRUE, gdb will automatically create pending breakpoints
   for unrecognized breakpoint locations.  
   If AUTO_BOOLEAN_AUTO, gdb will query when breakpoints are unrecognized.  */
static enum auto_boolean pending_break_support;
static void
show_pending_break_support (struct ui_file *file, int from_tty,
			    struct cmd_list_element *c,
			    const char *value)
{
  fprintf_filtered (file, _("\
Debugger's behavior regarding pending breakpoints is %s.\n"),
		    value);
}
 
/* If 1, gdb will automatically use hardware breakpoints for breakpoints
   set with "break" but falling in read-only memory. 
   If 0, gdb will warn about such breakpoints, but won't automatically
   use hardware breakpoints.  */
static int automatic_hardware_breakpoints;
static void
show_automatic_hardware_breakpoints (struct ui_file *file, int from_tty,
				     struct cmd_list_element *c,
				     const char *value)
{
  fprintf_filtered (file, _("\
Automatic usage of hardware breakpoints is %s.\n"),
		    value);
}
 
 
void _initialize_breakpoint (void);
 
extern int addressprint;	/* Print machine addresses? */
 
/* Are we executing breakpoint commands?  */
static int executing_breakpoint_commands;
 
/* Are overlay event breakpoints enabled? */
static int overlay_events_enabled;
 
/* Walk the following statement or block through all breakpoints.
   ALL_BREAKPOINTS_SAFE does so even if the statment deletes the current
   breakpoint.  */
 
#define ALL_BREAKPOINTS(B)  for (B = breakpoint_chain; B; B = B->next)
 
#define ALL_BREAKPOINTS_SAFE(B,TMP)	\
	for (B = breakpoint_chain;	\
	     B ? (TMP=B->next, 1): 0;	\
	     B = TMP)
 
/* Similar iterators for the low-level breakpoints.  */
 
#define ALL_BP_LOCATIONS(B)  for (B = bp_location_chain; B; B = B->global_next)
 
#define ALL_BP_LOCATIONS_SAFE(B,TMP)	\
	for (B = bp_location_chain;	\
	     B ? (TMP=B->global_next, 1): 0;	\
	     B = TMP)
 
/* True if breakpoint hit counts should be displayed in breakpoint info.  */
 
int show_breakpoint_hit_counts = 1;
 
/* Chains of all breakpoints defined.  */
 
struct breakpoint *breakpoint_chain;
 
struct bp_location *bp_location_chain;
 
/* Number of last breakpoint made.  */
 
int breakpoint_count;
 
/* Pointer to current exception event record */
static struct exception_event_record *current_exception_event;
 
/* This function returns a pointer to the string representation of the
   pathname of the dynamically-linked library that has just been
   loaded.
 
   This function must be used only when SOLIB_HAVE_LOAD_EVENT is TRUE,
   or undefined results are guaranteed.
 
   This string's contents are only valid immediately after the
   inferior has stopped in the dynamic linker hook, and becomes
   invalid as soon as the inferior is continued.  Clients should make
   a copy of this string if they wish to continue the inferior and
   then access the string.  */
 
#ifndef SOLIB_LOADED_LIBRARY_PATHNAME
#define SOLIB_LOADED_LIBRARY_PATHNAME(pid) ""
#endif
 
/* This function returns a pointer to the string representation of the
   pathname of the dynamically-linked library that has just been
   unloaded.
 
   This function must be used only when SOLIB_HAVE_UNLOAD_EVENT is
   TRUE, or undefined results are guaranteed.
 
   This string's contents are only valid immediately after the
   inferior has stopped in the dynamic linker hook, and becomes
   invalid as soon as the inferior is continued.  Clients should make
   a copy of this string if they wish to continue the inferior and
   then access the string.  */
 
#ifndef SOLIB_UNLOADED_LIBRARY_PATHNAME
#define SOLIB_UNLOADED_LIBRARY_PATHNAME(pid) ""
#endif
 
/* This function is called by the "catch load" command.  It allows the
   debugger to be notified by the dynamic linker when a specified
   library file (or any library file, if filename is NULL) is loaded.  */
 
#ifndef SOLIB_CREATE_CATCH_LOAD_HOOK
#define SOLIB_CREATE_CATCH_LOAD_HOOK(pid,tempflag,filename,cond_string) \
   error (_("catch of library loads not yet implemented on this platform"))
#endif
 
/* This function is called by the "catch unload" command.  It allows
   the debugger to be notified by the dynamic linker when a specified
   library file (or any library file, if filename is NULL) is
   unloaded.  */
 
#ifndef SOLIB_CREATE_CATCH_UNLOAD_HOOK
#define SOLIB_CREATE_CATCH_UNLOAD_HOOK(pid, tempflag, filename, cond_string) \
   error (_("catch of library unloads not yet implemented on this platform"))
#endif
 
/* Return whether a breakpoint is an active enabled breakpoint.  */
static int
breakpoint_enabled (struct breakpoint *b)
{
  return (b->enable_state == bp_enabled);
}
 
/* Set breakpoint count to NUM.  */
 
void
set_breakpoint_count (int num)
{
  breakpoint_count = num;
  set_internalvar (lookup_internalvar ("bpnum"),
		   value_from_longest (builtin_type_int, (LONGEST) num));
}
 
/* Used in run_command to zero the hit count when a new run starts. */
 
void
clear_breakpoint_hit_counts (void)
{
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
    b->hit_count = 0;
}
 
/* Default address, symtab and line to put a breakpoint at
   for "break" command with no arg.
   if default_breakpoint_valid is zero, the other three are
   not valid, and "break" with no arg is an error.
 
   This set by print_stack_frame, which calls set_default_breakpoint.  */
 
int default_breakpoint_valid;
CORE_ADDR default_breakpoint_address;
struct symtab *default_breakpoint_symtab;
int default_breakpoint_line;

/* *PP is a string denoting a breakpoint.  Get the number of the breakpoint.
   Advance *PP after the string and any trailing whitespace.
 
   Currently the string can either be a number or "$" followed by the name
   of a convenience variable.  Making it an expression wouldn't work well
   for map_breakpoint_numbers (e.g. "4 + 5 + 6").
 
   If the string is a NULL pointer, that denotes the last breakpoint.
 
   TRAILER is a character which can be found after the number; most
   commonly this is `-'.  If you don't want a trailer, use \0.  */ 
static int
get_number_trailer (char **pp, int trailer)
{
  int retval = 0;	/* default */
  char *p = *pp;
 
  if (p == NULL)
    /* Empty line means refer to the last breakpoint.  */
    return breakpoint_count;
  else if (*p == '$')
    {
      /* Make a copy of the name, so we can null-terminate it
         to pass to lookup_internalvar().  */
      char *varname;
      char *start = ++p;
      struct value *val;
 
      while (isalnum (*p) || *p == '_')
	p++;
      varname = (char *) alloca (p - start + 1);
      strncpy (varname, start, p - start);
      varname[p - start] = '\0';
      val = value_of_internalvar (lookup_internalvar (varname));
      if (TYPE_CODE (value_type (val)) == TYPE_CODE_INT)
	retval = (int) value_as_long (val);
      else
	{
	  printf_filtered (_("Convenience variable must have integer value.\n"));
	  retval = 0;
	}
    }
  else
    {
      if (*p == '-')
	++p;
      while (*p >= '0' && *p <= '9')
	++p;
      if (p == *pp)
	/* There is no number here.  (e.g. "cond a == b").  */
	{
	  /* Skip non-numeric token */
	  while (*p && !isspace((int) *p))
	    ++p;
	  /* Return zero, which caller must interpret as error. */
	  retval = 0;
	}
      else
	retval = atoi (*pp);
    }
  if (!(isspace (*p) || *p == '\0' || *p == trailer))
    {
      /* Trailing junk: return 0 and let caller print error msg. */
      while (!(isspace (*p) || *p == '\0' || *p == trailer))
	++p;
      retval = 0;
    }
  while (isspace (*p))
    p++;
  *pp = p;
  return retval;
}
 
 
/* Like get_number_trailer, but don't allow a trailer.  */
int
get_number (char **pp)
{
  return get_number_trailer (pp, '\0');
}
 
/* Parse a number or a range.
 * A number will be of the form handled by get_number.
 * A range will be of the form <number1> - <number2>, and 
 * will represent all the integers between number1 and number2,
 * inclusive.
 *
 * While processing a range, this fuction is called iteratively;
 * At each call it will return the next value in the range.
 *
 * At the beginning of parsing a range, the char pointer PP will
 * be advanced past <number1> and left pointing at the '-' token.
 * Subsequent calls will not advance the pointer until the range
 * is completed.  The call that completes the range will advance
 * pointer PP past <number2>.
 */
 
int 
get_number_or_range (char **pp)
{
  static int last_retval, end_value;
  static char *end_ptr;
  static int in_range = 0;
 
  if (**pp != '-')
    {
      /* Default case: pp is pointing either to a solo number, 
	 or to the first number of a range.  */
      last_retval = get_number_trailer (pp, '-');
      if (**pp == '-')
	{
	  char **temp;
 
	  /* This is the start of a range (<number1> - <number2>).
	     Skip the '-', parse and remember the second number,
	     and also remember the end of the final token.  */
 
	  temp = &end_ptr; 
	  end_ptr = *pp + 1; 
	  while (isspace ((int) *end_ptr))
	    end_ptr++;	/* skip white space */
	  end_value = get_number (temp);
	  if (end_value < last_retval) 
	    {
	      error (_("inverted range"));
	    }
	  else if (end_value == last_retval)
	    {
	      /* degenerate range (number1 == number2).  Advance the
		 token pointer so that the range will be treated as a
		 single number.  */ 
	      *pp = end_ptr;
	    }
	  else
	    in_range = 1;
	}
    }
  else if (! in_range)
    error (_("negative value"));
  else
    {
      /* pp points to the '-' that betokens a range.  All
	 number-parsing has already been done.  Return the next
	 integer value (one greater than the saved previous value).
	 Do not advance the token pointer 'pp' until the end of range
	 is reached.  */
 
      if (++last_retval == end_value)
	{
	  /* End of range reached; advance token pointer.  */
	  *pp = end_ptr;
	  in_range = 0;
	}
    }
  return last_retval;
}
 
 

/* condition N EXP -- set break condition of breakpoint N to EXP.  */
 
static void
condition_command (char *arg, int from_tty)
{
  struct breakpoint *b;
  char *p;
  int bnum;
 
  if (arg == 0)
    error_no_arg (_("breakpoint number"));
 
  p = arg;
  bnum = get_number (&p);
  if (bnum == 0)
    error (_("Bad breakpoint argument: '%s'"), arg);
 
  ALL_BREAKPOINTS (b)
    if (b->number == bnum)
    {
      struct bp_location *loc = b->loc;
      for (; loc; loc = loc->next)
	{
	  if (loc->cond)
	    {
	      xfree (loc->cond);
	      loc->cond = 0;
	    }
	}
      if (b->cond_string != NULL)
	xfree (b->cond_string);
 
      if (*p == 0)
	{
	  b->cond_string = NULL;
	  if (from_tty)
	    printf_filtered (_("Breakpoint %d now unconditional.\n"), bnum);
	}
      else
	{
	  arg = p;
	  /* I don't know if it matters whether this is the string the user
	     typed in or the decompiled expression.  */
	  b->cond_string = savestring (arg, strlen (arg));
	  b->condition_not_parsed = 0;
	  for (loc = b->loc; loc; loc = loc->next)
	    {
	      arg = p;
	      loc->cond = parse_exp_1 (&arg, block_for_pc (loc->address), 0);
	      if (*arg)
		error (_("Junk at end of expression"));
	    }
	}
      breakpoints_changed ();
      breakpoint_modify_event (b->number);
      return;
    }
 
  error (_("No breakpoint number %d."), bnum);
}
 
static void
commands_command (char *arg, int from_tty)
{
  struct breakpoint *b;
  char *p;
  int bnum;
  struct command_line *l;
 
  /* If we allowed this, we would have problems with when to
     free the storage, if we change the commands currently
     being read from.  */
 
  if (executing_breakpoint_commands)
    error (_("Can't use the \"commands\" command among a breakpoint's commands."));
 
  p = arg;
  bnum = get_number (&p);
 
  if (p && *p)
    error (_("Unexpected extra arguments following breakpoint number."));
 
  ALL_BREAKPOINTS (b)
    if (b->number == bnum)
      {
	char *tmpbuf = xstrprintf ("Type commands for when breakpoint %d is hit, one per line.", 
				 bnum);
	struct cleanup *cleanups = make_cleanup (xfree, tmpbuf);
	l = read_command_lines (tmpbuf, from_tty);
	do_cleanups (cleanups);
	free_command_lines (&b->commands);
	b->commands = l;
	breakpoints_changed ();
	breakpoint_modify_event (b->number);
	return;
    }
  error (_("No breakpoint number %d."), bnum);
}
 
/* Like commands_command, but instead of reading the commands from
   input stream, takes them from an already parsed command structure.
 
   This is used by cli-script.c to DTRT with breakpoint commands
   that are part of if and while bodies.  */
enum command_control_type
commands_from_control_command (char *arg, struct command_line *cmd)
{
  struct breakpoint *b;
  char *p;
  int bnum;
 
  /* If we allowed this, we would have problems with when to
     free the storage, if we change the commands currently
     being read from.  */
 
  if (executing_breakpoint_commands)
    error (_("Can't use the \"commands\" command among a breakpoint's commands."));
 
  /* An empty string for the breakpoint number means the last
     breakpoint, but get_number expects a NULL pointer.  */
  if (arg && !*arg)
    p = NULL;
  else
    p = arg;
  bnum = get_number (&p);
 
  if (p && *p)
    error (_("Unexpected extra arguments following breakpoint number."));
 
  ALL_BREAKPOINTS (b)
    if (b->number == bnum)
      {
	free_command_lines (&b->commands);
	if (cmd->body_count != 1)
	  error (_("Invalid \"commands\" block structure."));
	/* We need to copy the commands because if/while will free the
	   list after it finishes execution.  */
	b->commands = copy_command_lines (cmd->body_list[0]);
	breakpoints_changed ();
	breakpoint_modify_event (b->number);
	return simple_control;
    }
  error (_("No breakpoint number %d."), bnum);
}

/* Like target_read_memory() but if breakpoints are inserted, return
   the shadow contents instead of the breakpoints themselves.
 
   Read "memory data" from whatever target or inferior we have. 
   Returns zero if successful, errno value if not.  EIO is used
   for address out of bounds.  If breakpoints are inserted, returns
   shadow contents, not the breakpoints themselves.  From breakpoint.c.  */
 
int
read_memory_nobpt (CORE_ADDR memaddr, gdb_byte *myaddr, unsigned len)
{
  int status;
  const struct bp_location *b;
  CORE_ADDR bp_addr = 0;
  int bp_size = 0;
 
  if (gdbarch_breakpoint_from_pc (current_gdbarch, &bp_addr, &bp_size) == NULL)
    /* No breakpoints on this machine. */
    return target_read_memory (memaddr, myaddr, len);
 
  ALL_BP_LOCATIONS (b)
  {
    if (b->owner->type == bp_none)
      warning (_("reading through apparently deleted breakpoint #%d?"),
              b->owner->number);
 
    if (b->loc_type != bp_loc_software_breakpoint)
      continue;
    if (!b->inserted)
      continue;
    /* Addresses and length of the part of the breakpoint that
       we need to copy.  */
    bp_addr = b->target_info.placed_address;
    bp_size = b->target_info.shadow_len;
    if (bp_size == 0)
      /* bp isn't valid, or doesn't shadow memory.  */
      continue;
    if (bp_addr + bp_size <= memaddr)
      /* The breakpoint is entirely before the chunk of memory we
         are reading.  */
      continue;
    if (bp_addr >= memaddr + len)
      /* The breakpoint is entirely after the chunk of memory we are
         reading. */
      continue;
    /* Copy the breakpoint from the shadow contents, and recurse for
       the things before and after.  */
    {
      /* Offset within shadow_contents.  */
      int bptoffset = 0;
 
      if (bp_addr < memaddr)
	{
	  /* Only copy the second part of the breakpoint.  */
	  bp_size -= memaddr - bp_addr;
	  bptoffset = memaddr - bp_addr;
	  bp_addr = memaddr;
	}
 
      if (bp_addr + bp_size > memaddr + len)
	{
	  /* Only copy the first part of the breakpoint.  */
	  bp_size -= (bp_addr + bp_size) - (memaddr + len);
	}
 
      memcpy (myaddr + bp_addr - memaddr,
	      b->target_info.shadow_contents + bptoffset, bp_size);
 
      if (bp_addr > memaddr)
	{
	  /* Copy the section of memory before the breakpoint.  */
	  status = read_memory_nobpt (memaddr, myaddr, bp_addr - memaddr);
	  if (status != 0)
	    return status;
	}
 
      if (bp_addr + bp_size < memaddr + len)
	{
	  /* Copy the section of memory after the breakpoint.  */
	  status = read_memory_nobpt (bp_addr + bp_size,
				      myaddr + bp_addr + bp_size - memaddr,
				      memaddr + len - (bp_addr + bp_size));
	  if (status != 0)
	    return status;
	}
      return 0;
    }
  }
  /* Nothing overlaps.  Just call read_memory_noerr.  */
  return target_read_memory (memaddr, myaddr, len);
}

 
/* A wrapper function for inserting catchpoints.  */
static void
insert_catchpoint (struct ui_out *uo, void *args)
{
  struct breakpoint *b = (struct breakpoint *) args;
  int val = -1;
 
  switch (b->type)
    {
    case bp_catch_fork:
      target_insert_fork_catchpoint (PIDGET (inferior_ptid));
      break;
    case bp_catch_vfork:
      target_insert_vfork_catchpoint (PIDGET (inferior_ptid));
      break;
    case bp_catch_exec:
      target_insert_exec_catchpoint (PIDGET (inferior_ptid));
      break;
    default:
      internal_error (__FILE__, __LINE__, _("unknown breakpoint type"));
      break;
    }
}
 
static int
is_hardware_watchpoint (struct breakpoint *bpt)
{
  return (bpt->type == bp_hardware_watchpoint
	  || bpt->type == bp_read_watchpoint
	  || bpt->type == bp_access_watchpoint);
}
 
/* Assuming that B is a hardware breakpoint:
   - Reparse watchpoint expression, is REPARSE is non-zero
   - Evaluate expression and store the result in B->val
   - Update the list of values that must be watched in B->loc.
 
   If the watchpoint is disabled, do nothing.  If this is
   local watchpoint that is out of scope, delete it.  */
static void
update_watchpoint (struct breakpoint *b, int reparse)
{
  int within_current_scope;
  struct value *mark = value_mark ();
  struct frame_id saved_frame_id;
  struct bp_location *loc;
  bpstat bs;
 
  unlink_locations_from_global_list (b);
  for (loc = b->loc; loc;)
    {
      struct bp_location *loc_next = loc->next;
      remove_breakpoint (loc, mark_uninserted);
      xfree (loc);
      loc = loc_next;
    }
  b->loc = NULL;
 
  if (b->disposition == disp_del_at_next_stop)
    return;
 
  /* Save the current frame's ID so we can restore it after
     evaluating the watchpoint expression on its own frame.  */
  /* FIXME drow/2003-09-09: It would be nice if evaluate_expression
     took a frame parameter, so that we didn't have to change the
     selected frame.  */
  saved_frame_id = get_frame_id (get_selected_frame (NULL));
 
  /* Determine if the watchpoint is within scope.  */
  if (b->exp_valid_block == NULL)
    within_current_scope = 1;
  else
    {
      struct frame_info *fi;
      fi = frame_find_by_id (b->watchpoint_frame);
      within_current_scope = (fi != NULL);
      if (within_current_scope)
	select_frame (fi);
    }
 
  if (within_current_scope && reparse)
    {
      char *s;
      if (b->exp)
	{
	  xfree (b->exp);
	  b->exp = NULL;
	}
      s = b->exp_string;
      b->exp = parse_exp_1 (&s, b->exp_valid_block, 0);
      /* If the meaning of expression itself changed, the old value is
	 no longer relevant.  We don't want to report a watchpoint hit
	 to the user when the old value and the new value may actually
	 be completely different objects.  */
      value_free (b->val);
      b->val = NULL;      
    }
 
 
  /* If we failed to parse the expression, for example because
     it refers to a global variable in a not-yet-loaded shared library,
     don't try to insert watchpoint.  We don't automatically delete
     such watchpoint, though, since failure to parse expression
     is different from out-of-scope watchpoint.  */
  if (within_current_scope && b->exp)
    {
      struct value *v, *next;
 
      /* Evaluate the expression and make sure it's not lazy, so that
	 after target stops again, we have a non-lazy previous value
	 to compare with. Also, making the value non-lazy will fetch
	 intermediate values as needed, which we use to decide which
	 addresses to watch.
 
	 The value returned by evaluate_expression is stored in b->val.
	 In addition, we look at all values which were created
	 during evaluation, and set watchoints at addresses as needed.
	 Those values are explicitly deleted here.  */
      v = evaluate_expression (b->exp);
      /* Avoid setting b->val if it's already set.  The meaning of
	 b->val is 'the last value' user saw, and we should update
	 it only if we reported that last value to user.  As it
	 happens, the code that reports it updates b->val directly.  */
      if (b->val == NULL)
	b->val = v;
      value_contents (v);
      value_release_to_mark (mark);
 
      /* Look at each value on the value chain.  */
      for (; v; v = next)
	{
	  /* If it's a memory location, and GDB actually needed
	     its contents to evaluate the expression, then we
	     must watch it.  */
	  if (VALUE_LVAL (v) == lval_memory
	      && ! value_lazy (v))
	    {
	      struct type *vtype = check_typedef (value_type (v));
 
	      /* We only watch structs and arrays if user asked
		 for it explicitly, never if they just happen to
		 appear in the middle of some value chain.  */
	      if (v == b->val
		  || (TYPE_CODE (vtype) != TYPE_CODE_STRUCT
		      && TYPE_CODE (vtype) != TYPE_CODE_ARRAY))
		{
		  CORE_ADDR addr;
		  int len, type;
		  struct bp_location *loc, **tmp;
 
		  addr = VALUE_ADDRESS (v) + value_offset (v);
		  len = TYPE_LENGTH (value_type (v));
		  type = hw_write;
		  if (b->type == bp_read_watchpoint)
		    type = hw_read;
		  else if (b->type == bp_access_watchpoint)
		    type = hw_access;
 
		  loc = allocate_bp_location (b, bp_hardware_watchpoint);
		  for (tmp = &(b->loc); *tmp != NULL; tmp = &((*tmp)->next))
		    ;
		  *tmp = loc;
		  loc->address = addr;
		  loc->length = len;
		  loc->watchpoint_type = type;
		}
	    }
 
	  next = value_next (v);
	  if (v != b->val)
	    value_free (v);
	}
 
      if (reparse && b->cond_string != NULL)
	{
	  char *s = b->cond_string;
	  if (b->loc->cond)
	    {
	      xfree (b->loc->cond);
	      b->loc->cond = NULL;
	    }
	  b->loc->cond = parse_exp_1 (&s, b->exp_valid_block, 0);
	}
    }
  else if (!within_current_scope)
    {
      printf_filtered (_("\
Hardware watchpoint %d deleted because the program has left the block \n\
in which its expression is valid.\n"),
		       b->number);
      if (b->related_breakpoint)
	b->related_breakpoint->disposition = disp_del_at_next_stop;
      b->disposition = disp_del_at_next_stop;
    }
 
  /* Restore the selected frame.  */
  select_frame (frame_find_by_id (saved_frame_id));
}
 
 
/* Insert a low-level "breakpoint" of some type.  BPT is the breakpoint.
   Any error messages are printed to TMP_ERROR_STREAM; and DISABLED_BREAKS,
   PROCESS_WARNING, and HW_BREAKPOINT_ERROR are used to report problems.
 
   NOTE drow/2003-09-09: This routine could be broken down to an object-style
   method for each breakpoint or catchpoint type.  */
static int
insert_bp_location (struct bp_location *bpt,
		    struct ui_file *tmp_error_stream,
		    int *disabled_breaks, int *process_warning,
		    int *hw_breakpoint_error)
{
  int val = 0;
 
  if (!breakpoint_enabled (bpt->owner))
    return 0;
 
  if (!bpt->enabled || bpt->shlib_disabled || bpt->inserted || bpt->duplicate)
    return 0;
 
  /* Initialize the target-specific information.  */
  memset (&bpt->target_info, 0, sizeof (bpt->target_info));
  bpt->target_info.placed_address = bpt->address;
 
  if (bpt->loc_type == bp_loc_software_breakpoint
      || bpt->loc_type == bp_loc_hardware_breakpoint)
    {
      if (bpt->owner->type != bp_hardware_breakpoint)
	{
	  /* If the explicitly specified breakpoint type
	     is not hardware breakpoint, check the memory map to see
	     if the breakpoint address is in read only memory or not.
	     Two important cases are:
	     - location type is not hardware breakpoint, memory
	     is readonly.  We change the type of the location to
	     hardware breakpoint.
	     - location type is hardware breakpoint, memory is read-write.
	     This means we've previously made the location hardware one, but
	     then the memory map changed, so we undo.
 
	     When breakpoints are removed, remove_breakpoints will
	     use location types we've just set here, the only possible
	     problem is that memory map has changed during running program,
	     but it's not going to work anyway with current gdb.  */
	  struct mem_region *mr 
	    = lookup_mem_region (bpt->target_info.placed_address);
 
	  if (mr)
	    {
	      if (automatic_hardware_breakpoints)
		{
		  int changed = 0;
		  enum bp_loc_type new_type;
 
		  if (mr->attrib.mode != MEM_RW)
		    new_type = bp_loc_hardware_breakpoint;
		  else 
		    new_type = bp_loc_software_breakpoint;
 
		  if (new_type != bpt->loc_type)
		    {
		      static int said = 0;
		      bpt->loc_type = new_type;
		      if (!said)
			{
			  fprintf_filtered (gdb_stdout, _("\
Note: automatically using hardware breakpoints for read-only addresses.\n"));
			  said = 1;
			}
		    }
		}
	      else if (bpt->loc_type == bp_loc_software_breakpoint
		       && mr->attrib.mode != MEM_RW)	    
		warning (_("cannot set software breakpoint at readonly address %s"),
			 paddr (bpt->address));
	    }
	}
 
      /* First check to see if we have to handle an overlay.  */
      if (overlay_debugging == ovly_off
	  || bpt->section == NULL
	  || !(section_is_overlay (bpt->section)))
	{
	  /* No overlay handling: just set the breakpoint.  */
 
	  if (bpt->loc_type == bp_loc_hardware_breakpoint)
	    val = target_insert_hw_breakpoint (&bpt->target_info);
	  else
	    val = target_insert_breakpoint (&bpt->target_info);
	}
      else
	{
	  /* This breakpoint is in an overlay section.  
	     Shall we set a breakpoint at the LMA?  */
	  if (!overlay_events_enabled)
	    {
	      /* Yes -- overlay event support is not active, 
		 so we must try to set a breakpoint at the LMA.
		 This will not work for a hardware breakpoint.  */
	      if (bpt->loc_type == bp_loc_hardware_breakpoint)
		warning (_("hardware breakpoint %d not supported in overlay!"),
			 bpt->owner->number);
	      else
		{
		  CORE_ADDR addr = overlay_unmapped_address (bpt->address,
							     bpt->section);
		  /* Set a software (trap) breakpoint at the LMA.  */
		  bpt->overlay_target_info = bpt->target_info;
		  bpt->overlay_target_info.placed_address = addr;
		  val = target_insert_breakpoint (&bpt->overlay_target_info);
		  if (val != 0)
		    fprintf_unfiltered (tmp_error_stream, 
					"Overlay breakpoint %d failed: in ROM?", 
					bpt->owner->number);
		}
	    }
	  /* Shall we set a breakpoint at the VMA? */
	  if (section_is_mapped (bpt->section))
	    {
	      /* Yes.  This overlay section is mapped into memory.  */
	      if (bpt->loc_type == bp_loc_hardware_breakpoint)
		val = target_insert_hw_breakpoint (&bpt->target_info);
	      else
		val = target_insert_breakpoint (&bpt->target_info);
	    }
	  else
	    {
	      /* No.  This breakpoint will not be inserted.  
		 No error, but do not mark the bp as 'inserted'.  */
	      return 0;
	    }
	}
 
      if (val)
	{
	  /* Can't set the breakpoint.  */
	  if (solib_address (bpt->address))
	    {
	      /* See also: disable_breakpoints_in_shlibs. */
	      val = 0;
	      bpt->shlib_disabled = 1;
	      if (!*disabled_breaks)
		{
		  fprintf_unfiltered (tmp_error_stream, 
				      "Cannot insert breakpoint %d.\n", 
				      bpt->owner->number);
		  fprintf_unfiltered (tmp_error_stream, 
				      "Temporarily disabling shared library breakpoints:\n");
		}
	      *disabled_breaks = 1;
	      fprintf_unfiltered (tmp_error_stream,
				  "breakpoint #%d\n", bpt->owner->number);
	    }
	  else
	    {
#ifdef ONE_PROCESS_WRITETEXT
	      *process_warning = 1;
#endif
	      if (bpt->loc_type == bp_loc_hardware_breakpoint)
		{
		  *hw_breakpoint_error = 1;
		  fprintf_unfiltered (tmp_error_stream, 
				      "Cannot insert hardware breakpoint %d.\n",
				      bpt->owner->number);
		}
	      else
		{
		  fprintf_unfiltered (tmp_error_stream, 
				      "Cannot insert breakpoint %d.\n", 
				      bpt->owner->number);
		  fprintf_filtered (tmp_error_stream, 
				    "Error accessing memory address ");
		  fputs_filtered (paddress (bpt->address), tmp_error_stream);
		  fprintf_filtered (tmp_error_stream, ": %s.\n",
				    safe_strerror (val));
		}
 
	    }
	}
      else
	bpt->inserted = 1;
 
      return val;
    }
 
  else if (bpt->loc_type == bp_loc_hardware_watchpoint
	   /* NOTE drow/2003-09-08: This state only exists for removing
	      watchpoints.  It's not clear that it's necessary... */
	   && bpt->owner->disposition != disp_del_at_next_stop)
    {
      val = target_insert_watchpoint (bpt->address, 
				      bpt->length,
				      bpt->watchpoint_type);
      bpt->inserted = (val != -1);
    }
 
  else if (bpt->owner->type == bp_catch_fork
	   || bpt->owner->type == bp_catch_vfork
	   || bpt->owner->type == bp_catch_exec)
    {
      struct gdb_exception e = catch_exception (uiout, insert_catchpoint,
						bpt->owner, RETURN_MASK_ERROR);
      exception_fprintf (gdb_stderr, e, "warning: inserting catchpoint %d: ",
			 bpt->owner->number);
      if (e.reason < 0)
	bpt->owner->enable_state = bp_disabled;
      else
	bpt->inserted = 1;
 
      /* We've already printed an error message if there was a problem
	 inserting this catchpoint, and we've disabled the catchpoint,
	 so just return success.  */
      return 0;
    }
 
  return 0;
}
 
/* insert_breakpoints is used when starting or continuing the program.
   remove_breakpoints is used when the program stops.
   Both return zero if successful,
   or an `errno' value if could not write the inferior.  */
 
void
insert_breakpoints (void)
{
  struct breakpoint *bpt;
  struct bp_location *b, *temp;
  int error = 0;
  int val = 0;
  int disabled_breaks = 0;
  int hw_breakpoint_error = 0;
  int process_warning = 0;
 
  struct ui_file *tmp_error_stream = mem_fileopen ();
  make_cleanup_ui_file_delete (tmp_error_stream);
 
  /* Explicitly mark the warning -- this will only be printed if
     there was an error.  */
  fprintf_unfiltered (tmp_error_stream, "Warning:\n");
 
  ALL_BREAKPOINTS (bpt)
    if (is_hardware_watchpoint (bpt))
      update_watchpoint (bpt, 0 /* don't reparse */);      
 
  ALL_BP_LOCATIONS_SAFE (b, temp)
    {
      if (!breakpoint_enabled (b->owner))
	continue;
 
      /* There is no point inserting thread-specific breakpoints if the
	 thread no longer exists.  */
      if (b->owner->thread != -1
	  && !valid_thread_id (b->owner->thread))
	continue;
 
      val = insert_bp_location (b, tmp_error_stream,
				    &disabled_breaks, &process_warning,
				    &hw_breakpoint_error);
      if (val)
	error = val;
    }
 
  /* If we failed to insert all locations of a watchpoint,
     remove them, as half-inserted watchpoint is of limited use.  */
  ALL_BREAKPOINTS (bpt)  
    {
      int some_failed = 0;
      struct bp_location *loc;
 
      if (!is_hardware_watchpoint (bpt))
	continue;
 
      if (bpt->enable_state != bp_enabled)
	continue;
 
      for (loc = bpt->loc; loc; loc = loc->next)
	if (!loc->inserted)
	  {
	    some_failed = 1;
	    break;
	  }
      if (some_failed)
	{
	  for (loc = bpt->loc; loc; loc = loc->next)
	    if (loc->inserted)
	      remove_breakpoint (loc, mark_uninserted);
 
	  hw_breakpoint_error = 1;
	  fprintf_unfiltered (tmp_error_stream,
			      "Could not insert hardware watchpoint %d.\n", 
			      bpt->number);
	  error = -1;
	}
    }
 
  if (error)
    {
      /* If a hardware breakpoint or watchpoint was inserted, add a
         message about possibly exhausted resources.  */
      if (hw_breakpoint_error)
	{
	  fprintf_unfiltered (tmp_error_stream, 
			      "Could not insert hardware breakpoints:\n\
You may have requested too many hardware breakpoints/watchpoints.\n");
	}
#ifdef ONE_PROCESS_WRITETEXT
      if (process_warning)
	fprintf_unfiltered (tmp_error_stream,
			    "The same program may be running in another process.");
#endif
      target_terminal_ours_for_output ();
      error_stream (tmp_error_stream);
    }
}
 
int
remove_breakpoints (void)
{
  struct bp_location *b;
  int val;
 
  ALL_BP_LOCATIONS (b)
  {
    if (b->inserted)
      {
	val = remove_breakpoint (b, mark_uninserted);
	if (val != 0)
	  return val;
      }
  }
  return 0;
}
 
int
remove_hw_watchpoints (void)
{
  struct bp_location *b;
  int val;
 
  ALL_BP_LOCATIONS (b)
  {
    if (b->inserted && b->loc_type == bp_loc_hardware_watchpoint)
      {
	val = remove_breakpoint (b, mark_uninserted);
	if (val != 0)
	  return val;
      }
  }
  return 0;
}
 
int
reattach_breakpoints (int pid)
{
  struct bp_location *b;
  int val;
  struct cleanup *old_chain = save_inferior_ptid ();
  struct ui_file *tmp_error_stream = mem_fileopen ();
  int dummy1 = 0, dummy2 = 0, dummy3 = 0;
 
  make_cleanup_ui_file_delete (tmp_error_stream);
 
  inferior_ptid = pid_to_ptid (pid);
  ALL_BP_LOCATIONS (b)
  {
    if (b->inserted)
      {
	b->inserted = 0;
	val = insert_bp_location (b, tmp_error_stream,
				  &dummy1, &dummy2, &dummy3);
	if (val != 0)
	  {
	    do_cleanups (old_chain);
	    return val;
	  }
      }
  }
  do_cleanups (old_chain);
  return 0;
}
 
void
update_breakpoints_after_exec (void)
{
  struct breakpoint *b;
  struct breakpoint *temp;
 
  /* Doing this first prevents the badness of having delete_breakpoint()
     write a breakpoint's current "shadow contents" to lift the bp.  That
     shadow is NOT valid after an exec()! */
  mark_breakpoints_out ();
 
  ALL_BREAKPOINTS_SAFE (b, temp)
  {
    /* Solib breakpoints must be explicitly reset after an exec(). */
    if (b->type == bp_shlib_event)
      {
	delete_breakpoint (b);
	continue;
      }
 
    /* Thread event breakpoints must be set anew after an exec(),
       as must overlay event breakpoints.  */
    if (b->type == bp_thread_event || b->type == bp_overlay_event)
      {
	delete_breakpoint (b);
	continue;
      }
 
    /* Step-resume breakpoints are meaningless after an exec(). */
    if (b->type == bp_step_resume)
      {
	delete_breakpoint (b);
	continue;
      }
 
    /* Don't delete an exec catchpoint, because else the inferior
       won't stop when it ought!
 
       Similarly, we probably ought to keep vfork catchpoints, 'cause
       on this target, we may not be able to stop when the vfork is
       seen, but only when the subsequent exec is seen.  (And because
       deleting fork catchpoints here but not vfork catchpoints will
       seem mysterious to users, keep those too.)  */
    if ((b->type == bp_catch_exec) ||
	(b->type == bp_catch_vfork) ||
	(b->type == bp_catch_fork))
      {
	continue;
      }
 
    /* bp_finish is a special case.  The only way we ought to be able
       to see one of these when an exec() has happened, is if the user
       caught a vfork, and then said "finish".  Ordinarily a finish just
       carries them to the call-site of the current callee, by setting
       a temporary bp there and resuming.  But in this case, the finish
       will carry them entirely through the vfork & exec.
 
       We don't want to allow a bp_finish to remain inserted now.  But
       we can't safely delete it, 'cause finish_command has a handle to
       the bp on a bpstat, and will later want to delete it.  There's a
       chance (and I've seen it happen) that if we delete the bp_finish
       here, that its storage will get reused by the time finish_command
       gets 'round to deleting the "use to be a bp_finish" breakpoint.
       We really must allow finish_command to delete a bp_finish.
 
       In the absense of a general solution for the "how do we know
       it's safe to delete something others may have handles to?"
       problem, what we'll do here is just uninsert the bp_finish, and
       let finish_command delete it.
 
       (We know the bp_finish is "doomed" in the sense that it's
       momentary, and will be deleted as soon as finish_command sees
       the inferior stopped.  So it doesn't matter that the bp's
       address is probably bogus in the new a.out, unlike e.g., the
       solib breakpoints.)  */
 
    if (b->type == bp_finish)
      {
	continue;
      }
 
    /* Without a symbolic address, we have little hope of the
       pre-exec() address meaning the same thing in the post-exec()
       a.out. */
    if (b->addr_string == NULL)
      {
	delete_breakpoint (b);
	continue;
      }
  }
  /* FIXME what about longjmp breakpoints?  Re-create them here?  */
  create_overlay_event_breakpoint ("_ovly_debug_event");
}
 
int
detach_breakpoints (int pid)
{
  struct bp_location *b;
  int val;
  struct cleanup *old_chain = save_inferior_ptid ();
 
  if (pid == PIDGET (inferior_ptid))
    error (_("Cannot detach breakpoints of inferior_ptid"));
 
  /* Set inferior_ptid; remove_breakpoint uses this global.  */
  inferior_ptid = pid_to_ptid (pid);
  ALL_BP_LOCATIONS (b)
  {
    if (b->inserted)
      {
	val = remove_breakpoint (b, mark_inserted);
	if (val != 0)
	  {
	    do_cleanups (old_chain);
	    return val;
	  }
      }
  }
  do_cleanups (old_chain);
  return 0;
}
 
static int
remove_breakpoint (struct bp_location *b, insertion_state_t is)
{
  int val;
 
  if (b->owner->enable_state == bp_permanent)
    /* Permanent breakpoints cannot be inserted or removed.  */
    return 0;
 
  if (b->owner->type == bp_none)
    warning (_("attempted to remove apparently deleted breakpoint #%d?"), 
	     b->owner->number);
 
  if (b->loc_type == bp_loc_software_breakpoint
      || b->loc_type == bp_loc_hardware_breakpoint)
    {
      /* "Normal" instruction breakpoint: either the standard
	 trap-instruction bp (bp_breakpoint), or a
	 bp_hardware_breakpoint.  */
 
      /* First check to see if we have to handle an overlay.  */
      if (overlay_debugging == ovly_off
	  || b->section == NULL
	  || !(section_is_overlay (b->section)))
	{
	  /* No overlay handling: just remove the breakpoint.  */
 
	  if (b->loc_type == bp_loc_hardware_breakpoint)
	    val = target_remove_hw_breakpoint (&b->target_info);
	  else
	    val = target_remove_breakpoint (&b->target_info);
	}
      else
	{
	  /* This breakpoint is in an overlay section.  
	     Did we set a breakpoint at the LMA?  */
	  if (!overlay_events_enabled)
	      {
		/* Yes -- overlay event support is not active, so we
		   should have set a breakpoint at the LMA.  Remove it.  
		*/
		/* Ignore any failures: if the LMA is in ROM, we will
		   have already warned when we failed to insert it.  */
		if (b->loc_type == bp_loc_hardware_breakpoint)
		  target_remove_hw_breakpoint (&b->overlay_target_info);
		else
		  target_remove_breakpoint (&b->overlay_target_info);
	      }
	  /* Did we set a breakpoint at the VMA? 
	     If so, we will have marked the breakpoint 'inserted'.  */
	  if (b->inserted)
	    {
	      /* Yes -- remove it.  Previously we did not bother to
		 remove the breakpoint if the section had been
		 unmapped, but let's not rely on that being safe.  We
		 don't know what the overlay manager might do.  */
	      if (b->loc_type == bp_loc_hardware_breakpoint)
		val = target_remove_hw_breakpoint (&b->target_info);
 
	      /* However, we should remove *software* breakpoints only
		 if the section is still mapped, or else we overwrite
		 wrong code with the saved shadow contents.  */
	      else if (section_is_mapped (b->section))
		val = target_remove_breakpoint (&b->target_info);
	      else
		val = 0;
	    }
	  else
	    {
	      /* No -- not inserted, so no need to remove.  No error.  */
	      val = 0;
	    }
	}
      if (val)
	return val;
      b->inserted = (is == mark_inserted);
    }
  else if (b->loc_type == bp_loc_hardware_watchpoint)
    {
      struct value *v;
      struct value *n;
 
      b->inserted = (is == mark_inserted);
      val = target_remove_watchpoint (b->address, b->length, 
				      b->watchpoint_type);
 
      /* Failure to remove any of the hardware watchpoints comes here.  */
      if ((is == mark_uninserted) && (b->inserted))
	warning (_("Could not remove hardware watchpoint %d."),
		 b->owner->number);
    }
  else if ((b->owner->type == bp_catch_fork ||
	    b->owner->type == bp_catch_vfork ||
	    b->owner->type == bp_catch_exec)
	   && breakpoint_enabled (b->owner)
	   && !b->duplicate)
    {
      val = -1;
      switch (b->owner->type)
	{
	case bp_catch_fork:
	  val = target_remove_fork_catchpoint (PIDGET (inferior_ptid));
	  break;
	case bp_catch_vfork:
	  val = target_remove_vfork_catchpoint (PIDGET (inferior_ptid));
	  break;
	case bp_catch_exec:
	  val = target_remove_exec_catchpoint (PIDGET (inferior_ptid));
	  break;
	default:
	  warning (_("Internal error, %s line %d."), __FILE__, __LINE__);
	  break;
	}
      if (val)
	return val;
      b->inserted = (is == mark_inserted);
    }
 
  return 0;
}
 
/* Clear the "inserted" flag in all breakpoints.  */
 
static void
mark_breakpoints_out (void)
{
  struct bp_location *bpt;
 
  ALL_BP_LOCATIONS (bpt)
    bpt->inserted = 0;
}
 
/* Clear the "inserted" flag in all breakpoints and delete any
   breakpoints which should go away between runs of the program.
 
   Plus other such housekeeping that has to be done for breakpoints
   between runs.
 
   Note: this function gets called at the end of a run (by
   generic_mourn_inferior) and when a run begins (by
   init_wait_for_inferior). */
 
 
 
void
breakpoint_init_inferior (enum inf_context context)
{
  struct breakpoint *b, *temp;
  struct bp_location *bpt;
 
  ALL_BP_LOCATIONS (bpt)
    bpt->inserted = 0;
 
  ALL_BREAKPOINTS_SAFE (b, temp)
  {
    switch (b->type)
      {
      case bp_call_dummy:
      case bp_watchpoint_scope:
 
	/* If the call dummy breakpoint is at the entry point it will
	   cause problems when the inferior is rerun, so we better
	   get rid of it. 
 
	   Also get rid of scope breakpoints.  */
	delete_breakpoint (b);
	break;
 
      case bp_watchpoint:
      case bp_hardware_watchpoint:
      case bp_read_watchpoint:
      case bp_access_watchpoint:
 
	/* Likewise for watchpoints on local expressions.  */
	if (b->exp_valid_block != NULL)
	  delete_breakpoint (b);
	else if (context == inf_starting) 
	  {
	    /* Reset val field to force reread of starting value
	       in insert_breakpoints.  */
	    if (b->val)
	      value_free (b->val);
	    b->val = NULL;
	  }
	break;
      default:
	break;
      }
  }
}
 
/* breakpoint_here_p (PC) returns non-zero if an enabled breakpoint
   exists at PC.  It returns ordinary_breakpoint_here if it's an
   ordinary breakpoint, or permanent_breakpoint_here if it's a
   permanent breakpoint.
   - When continuing from a location with an ordinary breakpoint, we
     actually single step once before calling insert_breakpoints.
   - When continuing from a localion with a permanent breakpoint, we
     need to use the `SKIP_PERMANENT_BREAKPOINT' macro, provided by
     the target, to advance the PC past the breakpoint.  */
 
enum breakpoint_here
breakpoint_here_p (CORE_ADDR pc)
{
  const struct bp_location *bpt;
  int any_breakpoint_here = 0;
 
  ALL_BP_LOCATIONS (bpt)
    {
      if (bpt->loc_type != bp_loc_software_breakpoint
	  && bpt->loc_type != bp_loc_hardware_breakpoint)
	continue;
 
      if ((breakpoint_enabled (bpt->owner)
	   || bpt->owner->enable_state == bp_permanent)
	  && bpt->address == pc)	/* bp is enabled and matches pc */
	{
	  if (overlay_debugging 
	      && section_is_overlay (bpt->section) 
	      && !section_is_mapped (bpt->section))
	    continue;		/* unmapped overlay -- can't be a match */
	  else if (bpt->owner->enable_state == bp_permanent)
	    return permanent_breakpoint_here;
	  else
	    any_breakpoint_here = 1;
	}
    }
 
  return any_breakpoint_here ? ordinary_breakpoint_here : 0;
}
 
 
/* Returns non-zero if there's a breakpoint inserted at PC, which is
   inserted using regular breakpoint_chain/bp_location_chain mechanism.
   This does not check for single-step breakpoints, which are
   inserted and removed using direct target manipulation.  */
 
int
regular_breakpoint_inserted_here_p (CORE_ADDR pc)
{
  const struct bp_location *bpt;
 
  ALL_BP_LOCATIONS (bpt)
    {
      if (bpt->loc_type != bp_loc_software_breakpoint
	  && bpt->loc_type != bp_loc_hardware_breakpoint)
	continue;
 
      if (bpt->inserted
	  && bpt->address == pc)	/* bp is inserted and matches pc */
	{
	  if (overlay_debugging 
	      && section_is_overlay (bpt->section) 
	      && !section_is_mapped (bpt->section))
	    continue;		/* unmapped overlay -- can't be a match */
	  else
	    return 1;
	}
    }
  return 0;
}
 
/* Returns non-zero iff there's either regular breakpoint
   or a single step breakpoint inserted at PC.  */
 
int
breakpoint_inserted_here_p (CORE_ADDR pc)
{
  if (regular_breakpoint_inserted_here_p (pc))
    return 1;
 
  if (single_step_breakpoint_inserted_here_p (pc))
    return 1;
 
  return 0;
}
 
/* This function returns non-zero iff there is a software breakpoint
   inserted at PC.  */
 
int
software_breakpoint_inserted_here_p (CORE_ADDR pc)
{
  const struct bp_location *bpt;
  int any_breakpoint_here = 0;
 
  ALL_BP_LOCATIONS (bpt)
    {
      if (bpt->loc_type != bp_loc_software_breakpoint)
	continue;
 
      if (bpt->inserted
	  && bpt->address == pc)	/* bp is enabled and matches pc */
	{
	  if (overlay_debugging 
	      && section_is_overlay (bpt->section) 
	      && !section_is_mapped (bpt->section))
	    continue;		/* unmapped overlay -- can't be a match */
	  else
	    return 1;
	}
    }
 
  /* Also check for software single-step breakpoints.  */
  if (single_step_breakpoint_inserted_here_p (pc))
    return 1;
 
  return 0;
}
 
/* breakpoint_thread_match (PC, PTID) returns true if the breakpoint at
   PC is valid for process/thread PTID.  */
 
int
breakpoint_thread_match (CORE_ADDR pc, ptid_t ptid)
{
  const struct bp_location *bpt;
  int thread;
 
  thread = pid_to_thread_id (ptid);
 
  ALL_BP_LOCATIONS (bpt)
    {
      if (bpt->loc_type != bp_loc_software_breakpoint
	  && bpt->loc_type != bp_loc_hardware_breakpoint)
	continue;
 
      if ((breakpoint_enabled (bpt->owner)
	   || bpt->owner->enable_state == bp_permanent)
	  && bpt->address == pc
	  && (bpt->owner->thread == -1 || bpt->owner->thread == thread))
	{
	  if (overlay_debugging 
	      && section_is_overlay (bpt->section) 
	      && !section_is_mapped (bpt->section))
	    continue;		/* unmapped overlay -- can't be a match */
	  else
	    return 1;
	}
    }
 
  return 0;
}

 
/* bpstat stuff.  External routines' interfaces are documented
   in breakpoint.h.  */
 
int
ep_is_catchpoint (struct breakpoint *ep)
{
  return
    (ep->type == bp_catch_load)
    || (ep->type == bp_catch_unload)
    || (ep->type == bp_catch_fork)
    || (ep->type == bp_catch_vfork)
    || (ep->type == bp_catch_exec);
 
  /* ??rehrauer: Add more kinds here, as are implemented... */
}
 
int
ep_is_shlib_catchpoint (struct breakpoint *ep)
{
  return
    (ep->type == bp_catch_load)
    || (ep->type == bp_catch_unload);
}
 
void 
bpstat_free (bpstat bs)
{
  if (bs->old_val != NULL)
    value_free (bs->old_val);
  free_command_lines (&bs->commands);
  xfree (bs);
}
 
/* Clear a bpstat so that it says we are not at any breakpoint.
   Also free any storage that is part of a bpstat.  */
 
void
bpstat_clear (bpstat *bsp)
{
  bpstat p;
  bpstat q;
 
  if (bsp == 0)
    return;
  p = *bsp;
  while (p != NULL)
    {
      q = p->next;
      bpstat_free (p);
      p = q;
    }
  *bsp = NULL;
}
 
/* Return a copy of a bpstat.  Like "bs1 = bs2" but all storage that
   is part of the bpstat is copied as well.  */
 
bpstat
bpstat_copy (bpstat bs)
{
  bpstat p = NULL;
  bpstat tmp;
  bpstat retval = NULL;
 
  if (bs == NULL)
    return bs;
 
  for (; bs != NULL; bs = bs->next)
    {
      tmp = (bpstat) xmalloc (sizeof (*tmp));
      memcpy (tmp, bs, sizeof (*tmp));
      if (bs->commands != NULL)
	tmp->commands = copy_command_lines (bs->commands);
      if (bs->old_val != NULL)
	tmp->old_val = value_copy (bs->old_val);
 
      if (p == NULL)
	/* This is the first thing in the chain.  */
	retval = tmp;
      else
	p->next = tmp;
      p = tmp;
    }
  p->next = NULL;
  return retval;
}
 
/* Find the bpstat associated with this breakpoint */
 
bpstat
bpstat_find_breakpoint (bpstat bsp, struct breakpoint *breakpoint)
{
  if (bsp == NULL)
    return NULL;
 
  for (; bsp != NULL; bsp = bsp->next)
    {
      if (bsp->breakpoint_at && bsp->breakpoint_at->owner == breakpoint)
	return bsp;
    }
  return NULL;
}
 
/* Find a step_resume breakpoint associated with this bpstat.
   (If there are multiple step_resume bp's on the list, this function
   will arbitrarily pick one.)
 
   It is an error to use this function if BPSTAT doesn't contain a
   step_resume breakpoint.
 
   See wait_for_inferior's use of this function.  */
struct breakpoint *
bpstat_find_step_resume_breakpoint (bpstat bsp)
{
  int current_thread;
 
  gdb_assert (bsp != NULL);
 
  current_thread = pid_to_thread_id (inferior_ptid);
 
  for (; bsp != NULL; bsp = bsp->next)
    {
      if ((bsp->breakpoint_at != NULL) &&
	  (bsp->breakpoint_at->owner->type == bp_step_resume) &&
	  (bsp->breakpoint_at->owner->thread == current_thread || 
	   bsp->breakpoint_at->owner->thread == -1))
	return bsp->breakpoint_at->owner;
    }
 
  internal_error (__FILE__, __LINE__, _("No step_resume breakpoint found."));
}
 
 
/* Put in *NUM the breakpoint number of the first breakpoint we are stopped
   at.  *BSP upon return is a bpstat which points to the remaining
   breakpoints stopped at (but which is not guaranteed to be good for
   anything but further calls to bpstat_num).
   Return 0 if passed a bpstat which does not indicate any breakpoints.
   Return -1 if stopped at a breakpoint that has been deleted since
   we set it.
   Return 1 otherwise.  */
 
int
bpstat_num (bpstat *bsp, int *num)
{
  struct breakpoint *b;
 
  if ((*bsp) == NULL)
    return 0;			/* No more breakpoint values */
 
  /* We assume we'll never have several bpstats that
     correspond to a single breakpoint -- otherwise, 
     this function might return the same number more
     than once and this will look ugly.  */
  b = (*bsp)->breakpoint_at ? (*bsp)->breakpoint_at->owner : NULL;
  *bsp = (*bsp)->next;
  if (b == NULL)
    return -1;			/* breakpoint that's been deleted since */
 
  *num = b->number;		/* We have its number */
  return 1;
}
 
/* Modify BS so that the actions will not be performed.  */
 
void
bpstat_clear_actions (bpstat bs)
{
  for (; bs != NULL; bs = bs->next)
    {
      free_command_lines (&bs->commands);
      if (bs->old_val != NULL)
	{
	  value_free (bs->old_val);
	  bs->old_val = NULL;
	}
    }
}
 
/* Stub for cleaning up our state if we error-out of a breakpoint command */
static void
cleanup_executing_breakpoints (void *ignore)
{
  executing_breakpoint_commands = 0;
}
 
/* Execute all the commands associated with all the breakpoints at this
   location.  Any of these commands could cause the process to proceed
   beyond this point, etc.  We look out for such changes by checking
   the global "breakpoint_proceeded" after each command.  */
 
void
bpstat_do_actions (bpstat *bsp)
{
  bpstat bs;
  struct cleanup *old_chain;
 
  /* Avoid endless recursion if a `source' command is contained
     in bs->commands.  */
  if (executing_breakpoint_commands)
    return;
 
  executing_breakpoint_commands = 1;
  old_chain = make_cleanup (cleanup_executing_breakpoints, 0);
 
top:
  /* Note that (as of this writing), our callers all appear to
     be passing us the address of global stop_bpstat.  And, if
     our calls to execute_control_command cause the inferior to
     proceed, that global (and hence, *bsp) will change.
 
     We must be careful to not touch *bsp unless the inferior
     has not proceeded. */
 
  /* This pointer will iterate over the list of bpstat's. */
  bs = *bsp;
 
  breakpoint_proceeded = 0;
  for (; bs != NULL; bs = bs->next)
    {
      struct command_line *cmd;
      struct cleanup *this_cmd_tree_chain;
 
      /* Take ownership of the BSP's command tree, if it has one.
 
         The command tree could legitimately contain commands like
         'step' and 'next', which call clear_proceed_status, which
         frees stop_bpstat's command tree.  To make sure this doesn't
         free the tree we're executing out from under us, we need to
         take ownership of the tree ourselves.  Since a given bpstat's
         commands are only executed once, we don't need to copy it; we
         can clear the pointer in the bpstat, and make sure we free
         the tree when we're done.  */
      cmd = bs->commands;
      bs->commands = 0;
      this_cmd_tree_chain = make_cleanup_free_command_lines (&cmd);
 
      while (cmd != NULL)
	{
	  execute_control_command (cmd);
 
	  if (breakpoint_proceeded)
	    break;
	  else
	    cmd = cmd->next;
	}
 
      /* We can free this command tree now.  */
      do_cleanups (this_cmd_tree_chain);
 
      if (breakpoint_proceeded)
	/* The inferior is proceeded by the command; bomb out now.
	   The bpstat chain has been blown away by wait_for_inferior.
	   But since execution has stopped again, there is a new bpstat
	   to look at, so start over.  */
	goto top;
    }
  do_cleanups (old_chain);
}
 
/* This is the normal print function for a bpstat.  In the future,
   much of this logic could (should?) be moved to bpstat_stop_status,
   by having it set different print_it values.
 
   Current scheme: When we stop, bpstat_print() is called.  It loops
   through the bpstat list of things causing this stop, calling the
   print_bp_stop_message function on each one. The behavior of the
   print_bp_stop_message function depends on the print_it field of
   bpstat. If such field so indicates, call this function here.
 
   Return values from this routine (ultimately used by bpstat_print()
   and normal_stop() to decide what to do): 
   PRINT_NOTHING: Means we already printed all we needed to print,
   don't print anything else.
   PRINT_SRC_ONLY: Means we printed something, and we do *not* desire
   that something to be followed by a location.
   PRINT_SCR_AND_LOC: Means we printed something, and we *do* desire
   that something to be followed by a location.
   PRINT_UNKNOWN: Means we printed nothing or we need to do some more
   analysis.  */
 
static enum print_stop_action
print_it_typical (bpstat bs)
{
  struct cleanup *old_chain, *ui_out_chain;
  struct breakpoint *b;
  const struct bp_location *bl;
  struct ui_stream *stb;
  stb = ui_out_stream_new (uiout);
  old_chain = make_cleanup_ui_out_stream_delete (stb);
  /* bs->breakpoint_at can be NULL if it was a momentary breakpoint
     which has since been deleted.  */
  if (bs->breakpoint_at == NULL)
    return PRINT_UNKNOWN;
  bl = bs->breakpoint_at;
  b = bl->owner;
 
  switch (b->type)
    {
    case bp_breakpoint:
    case bp_hardware_breakpoint:
      if (bl->address != bl->requested_address)
	breakpoint_adjustment_warning (bl->requested_address,
	                               bl->address,
				       b->number, 1);
      annotate_breakpoint (b->number);
      ui_out_text (uiout, "\nBreakpoint ");
      if (ui_out_is_mi_like_p (uiout))
	ui_out_field_string (uiout, "reason", 
			     async_reason_lookup (EXEC_ASYNC_BREAKPOINT_HIT));
      ui_out_field_int (uiout, "bkptno", b->number);
      ui_out_text (uiout, ", ");
      return PRINT_SRC_AND_LOC;
      break;
 
    case bp_shlib_event:
      /* Did we stop because the user set the stop_on_solib_events
	 variable?  (If so, we report this as a generic, "Stopped due
	 to shlib event" message.) */
      printf_filtered (_("Stopped due to shared library event\n"));
      return PRINT_NOTHING;
      break;
 
    case bp_thread_event:
      /* Not sure how we will get here. 
	 GDB should not stop for these breakpoints.  */
      printf_filtered (_("Thread Event Breakpoint: gdb should not stop!\n"));
      return PRINT_NOTHING;
      break;
 
    case bp_overlay_event:
      /* By analogy with the thread event, GDB should not stop for these. */
      printf_filtered (_("Overlay Event Breakpoint: gdb should not stop!\n"));
      return PRINT_NOTHING;
      break;
 
    case bp_catch_load:
      annotate_catchpoint (b->number);
      printf_filtered (_("\nCatchpoint %d (loaded %s), "),
		       b->number,
		       b->triggered_dll_pathname);
      return PRINT_SRC_AND_LOC;
      break;
 
    case bp_catch_unload:
      annotate_catchpoint (b->number);
      printf_filtered (_("\nCatchpoint %d (unloaded %s), "),
		       b->number,
		       b->triggered_dll_pathname);
      return PRINT_SRC_AND_LOC;
      break;
 
    case bp_catch_fork:
      annotate_catchpoint (b->number);
      printf_filtered (_("\nCatchpoint %d (forked process %d), "),
		       b->number, 
		       b->forked_inferior_pid);
      return PRINT_SRC_AND_LOC;
      break;
 
    case bp_catch_vfork:
      annotate_catchpoint (b->number);
      printf_filtered (_("\nCatchpoint %d (vforked process %d), "),
		       b->number, 
		       b->forked_inferior_pid);
      return PRINT_SRC_AND_LOC;
      break;
 
    case bp_catch_exec:
      annotate_catchpoint (b->number);
      printf_filtered (_("\nCatchpoint %d (exec'd %s), "),
		       b->number,
		       b->exec_pathname);
      return PRINT_SRC_AND_LOC;
      break;
 
    case bp_watchpoint:
    case bp_hardware_watchpoint:
      if (bs->old_val != NULL)
	{
	  annotate_watchpoint (b->number);
	  if (ui_out_is_mi_like_p (uiout))
	    ui_out_field_string
	      (uiout, "reason",
	       async_reason_lookup (EXEC_ASYNC_WATCHPOINT_TRIGGER));
	  mention (b);
	  ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "value");
	  ui_out_text (uiout, "\nOld value = ");
	  value_print (bs->old_val, stb->stream, 0, Val_pretty_default);
	  ui_out_field_stream (uiout, "old", stb);
	  ui_out_text (uiout, "\nNew value = ");
	  value_print (b->val, stb->stream, 0, Val_pretty_default);
	  ui_out_field_stream (uiout, "new", stb);
	  do_cleanups (ui_out_chain);
	  ui_out_text (uiout, "\n");
	  value_free (bs->old_val);
	  bs->old_val = NULL;
	}
      /* More than one watchpoint may have been triggered.  */
      return PRINT_UNKNOWN;
      break;
 
    case bp_read_watchpoint:
      if (ui_out_is_mi_like_p (uiout))
	ui_out_field_string
	  (uiout, "reason",
	   async_reason_lookup (EXEC_ASYNC_READ_WATCHPOINT_TRIGGER));
      mention (b);
      ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "value");
      ui_out_text (uiout, "\nValue = ");
      value_print (b->val, stb->stream, 0, Val_pretty_default);
      ui_out_field_stream (uiout, "value", stb);
      do_cleanups (ui_out_chain);
      ui_out_text (uiout, "\n");
      return PRINT_UNKNOWN;
      break;
 
    case bp_access_watchpoint:
      if (bs->old_val != NULL)     
	{
	  annotate_watchpoint (b->number);
	  if (ui_out_is_mi_like_p (uiout))
	    ui_out_field_string
	      (uiout, "reason",
	       async_reason_lookup (EXEC_ASYNC_ACCESS_WATCHPOINT_TRIGGER));
	  mention (b);
	  ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "value");
	  ui_out_text (uiout, "\nOld value = ");
	  value_print (bs->old_val, stb->stream, 0, Val_pretty_default);
	  ui_out_field_stream (uiout, "old", stb);
	  value_free (bs->old_val);
	  bs->old_val = NULL;
	  ui_out_text (uiout, "\nNew value = ");
	}
      else 
	{
	  mention (b);
	  if (ui_out_is_mi_like_p (uiout))
	    ui_out_field_string
	      (uiout, "reason",
	       async_reason_lookup (EXEC_ASYNC_ACCESS_WATCHPOINT_TRIGGER));
	  ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "value");
	  ui_out_text (uiout, "\nValue = ");
	}
      value_print (b->val, stb->stream, 0,Val_pretty_default);
      ui_out_field_stream (uiout, "new", stb);
      do_cleanups (ui_out_chain);
      ui_out_text (uiout, "\n");
      return PRINT_UNKNOWN;
      break;
 
    /* Fall through, we don't deal with these types of breakpoints
       here. */
 
    case bp_finish:
      if (ui_out_is_mi_like_p (uiout))
	ui_out_field_string
	  (uiout, "reason",
	   async_reason_lookup (EXEC_ASYNC_FUNCTION_FINISHED));
      return PRINT_UNKNOWN;
      break;
 
    case bp_until:
      if (ui_out_is_mi_like_p (uiout))
	ui_out_field_string
	  (uiout, "reason",
	   async_reason_lookup (EXEC_ASYNC_LOCATION_REACHED));
      return PRINT_UNKNOWN;
      break;
 
    case bp_none:
    case bp_longjmp:
    case bp_longjmp_resume:
    case bp_step_resume:
    case bp_watchpoint_scope:
    case bp_call_dummy:
    default:
      return PRINT_UNKNOWN;
    }
}
 
/* Generic routine for printing messages indicating why we
   stopped. The behavior of this function depends on the value
   'print_it' in the bpstat structure.  Under some circumstances we
   may decide not to print anything here and delegate the task to
   normal_stop(). */
 
static enum print_stop_action
print_bp_stop_message (bpstat bs)
{
  switch (bs->print_it)
    {
    case print_it_noop:
      /* Nothing should be printed for this bpstat entry. */
      return PRINT_UNKNOWN;
      break;
 
    case print_it_done:
      /* We still want to print the frame, but we already printed the
         relevant messages. */
      return PRINT_SRC_AND_LOC;
      break;
 
    case print_it_normal:
      {
	const struct bp_location *bl = bs->breakpoint_at;
	struct breakpoint *b = bl ? bl->owner : NULL;
 
	/* Normal case.  Call the breakpoint's print_it method, or
	   print_it_typical.  */
	/* FIXME: how breakpoint can ever be NULL here?  */
	if (b != NULL && b->ops != NULL && b->ops->print_it != NULL)
	  return b->ops->print_it (b);
	else
	  return print_it_typical (bs);
      }
	break;
 
    default:
      internal_error (__FILE__, __LINE__,
		      _("print_bp_stop_message: unrecognized enum value"));
      break;
    }
}
 
/* Print a message indicating what happened.  This is called from
   normal_stop().  The input to this routine is the head of the bpstat
   list - a list of the eventpoints that caused this stop.  This
   routine calls the generic print routine for printing a message
   about reasons for stopping.  This will print (for example) the
   "Breakpoint n," part of the output.  The return value of this
   routine is one of:
 
   PRINT_UNKNOWN: Means we printed nothing
   PRINT_SRC_AND_LOC: Means we printed something, and expect subsequent
   code to print the location. An example is 
   "Breakpoint 1, " which should be followed by
   the location.
   PRINT_SRC_ONLY: Means we printed something, but there is no need
   to also print the location part of the message.
   An example is the catch/throw messages, which
   don't require a location appended to the end.  
   PRINT_NOTHING: We have done some printing and we don't need any 
   further info to be printed.*/
 
enum print_stop_action
bpstat_print (bpstat bs)
{
  int val;
 
  /* Maybe another breakpoint in the chain caused us to stop.
     (Currently all watchpoints go on the bpstat whether hit or not.
     That probably could (should) be changed, provided care is taken
     with respect to bpstat_explains_signal).  */
  for (; bs; bs = bs->next)
    {
      val = print_bp_stop_message (bs);
      if (val == PRINT_SRC_ONLY 
	  || val == PRINT_SRC_AND_LOC 
	  || val == PRINT_NOTHING)
	return val;
    }
 
  /* We reached the end of the chain, or we got a null BS to start
     with and nothing was printed. */
  return PRINT_UNKNOWN;
}
 
/* Evaluate the expression EXP and return 1 if value is zero.
   This is used inside a catch_errors to evaluate the breakpoint condition. 
   The argument is a "struct expression *" that has been cast to char * to 
   make it pass through catch_errors.  */
 
static int
breakpoint_cond_eval (void *exp)
{
  struct value *mark = value_mark ();
  int i = !value_true (evaluate_expression ((struct expression *) exp));
  value_free_to_mark (mark);
  return i;
}
 
/* Allocate a new bpstat and chain it to the current one.  */
 
static bpstat
bpstat_alloc (const struct bp_location *bl, bpstat cbs /* Current "bs" value */ )
{
  bpstat bs;
 
  bs = (bpstat) xmalloc (sizeof (*bs));
  cbs->next = bs;
  bs->breakpoint_at = bl;
  /* If the condition is false, etc., don't do the commands.  */
  bs->commands = NULL;
  bs->old_val = NULL;
  bs->print_it = print_it_normal;
  return bs;
}

/* The target has stopped with waitstatus WS.  Check if any hardware
   watchpoints have triggered, according to the target.  */
 
int
watchpoints_triggered (struct target_waitstatus *ws)
{
  int stopped_by_watchpoint = STOPPED_BY_WATCHPOINT (*ws);
  CORE_ADDR addr;
  struct breakpoint *b;
 
  if (!stopped_by_watchpoint)
    {
      /* We were not stopped by a watchpoint.  Mark all watchpoints
	 as not triggered.  */
      ALL_BREAKPOINTS (b)
	if (b->type == bp_hardware_watchpoint
	    || b->type == bp_read_watchpoint
	    || b->type == bp_access_watchpoint)
	  b->watchpoint_triggered = watch_triggered_no;
 
      return 0;
    }
 
  if (!target_stopped_data_address (&current_target, &addr))
    {
      /* We were stopped by a watchpoint, but we don't know where.
	 Mark all watchpoints as unknown.  */
      ALL_BREAKPOINTS (b)
	if (b->type == bp_hardware_watchpoint
	    || b->type == bp_read_watchpoint
	    || b->type == bp_access_watchpoint)
	  b->watchpoint_triggered = watch_triggered_unknown;
 
      return stopped_by_watchpoint;
    }
 
  /* The target could report the data address.  Mark watchpoints
     affected by this data address as triggered, and all others as not
     triggered.  */
 
  ALL_BREAKPOINTS (b)
    if (b->type == bp_hardware_watchpoint
	|| b->type == bp_read_watchpoint
	|| b->type == bp_access_watchpoint)
      {
	struct bp_location *loc;
	struct value *v;
 
	b->watchpoint_triggered = watch_triggered_no;
	for (loc = b->loc; loc; loc = loc->next)
	  /* Exact match not required.  Within range is
	     sufficient.  */
	  if (addr >= loc->address
	      && addr < loc->address + loc->length)
	    {
	      b->watchpoint_triggered = watch_triggered_yes;
	      break;
	    }
      }
 
  return 1;
}
 
/* Possible return values for watchpoint_check (this can't be an enum
   because of check_errors).  */
/* The watchpoint has been deleted.  */
#define WP_DELETED 1
/* The value has changed.  */
#define WP_VALUE_CHANGED 2
/* The value has not changed.  */
#define WP_VALUE_NOT_CHANGED 3
 
#define BP_TEMPFLAG 1
#define BP_HARDWAREFLAG 2
 
/* Check watchpoint condition.  */
 
static int
watchpoint_check (void *p)
{
  bpstat bs = (bpstat) p;
  struct breakpoint *b;
  struct frame_info *fr;
  int within_current_scope;
 
  b = bs->breakpoint_at->owner;
 
  if (b->exp_valid_block == NULL)
    within_current_scope = 1;
  else
    {
      /* There is no current frame at this moment.  If we're going to have
         any chance of handling watchpoints on local variables, we'll need
         the frame chain (so we can determine if we're in scope).  */
      reinit_frame_cache ();
      fr = frame_find_by_id (b->watchpoint_frame);
      within_current_scope = (fr != NULL);
 
      /* If we've gotten confused in the unwinder, we might have
	 returned a frame that can't describe this variable.  */
      if (within_current_scope
	  && block_function (b->exp_valid_block) != get_frame_function (fr))
	within_current_scope = 0;
 
      /* in_function_epilogue_p() returns a non-zero value if we're still
	 in the function but the stack frame has already been invalidated.
	 Since we can't rely on the values of local variables after the
	 stack has been destroyed, we are treating the watchpoint in that
	 state as `not changed' without further checking.
 
	 vinschen/2003-09-04: The former implementation left out the case
	 that the watchpoint frame couldn't be found by frame_find_by_id()
	 because the current PC is currently in an epilogue.  Calling
	 gdbarch_in_function_epilogue_p() also when fr == NULL fixes that. */
      if ((!within_current_scope || fr == get_current_frame ())
          && gdbarch_in_function_epilogue_p (current_gdbarch, read_pc ()))
	return WP_VALUE_NOT_CHANGED;
      if (fr && within_current_scope)
	/* If we end up stopping, the current frame will get selected
	   in normal_stop.  So this call to select_frame won't affect
	   the user.  */
	select_frame (fr);
    }
 
  if (within_current_scope)
    {
      /* We use value_{,free_to_}mark because it could be a
         *long* time before we return to the command level and
         call free_all_values.  We can't call free_all_values because
         we might be in the middle of evaluating a function call.  */
 
      struct value *mark = value_mark ();
      struct value *new_val = evaluate_expression (b->exp);
      if (!value_equal (b->val, new_val))
	{
	  release_value (new_val);
	  value_free_to_mark (mark);
	  bs->old_val = b->val;
	  b->val = new_val;
	  /* We will stop here */
	  return WP_VALUE_CHANGED;
	}
      else
	{
	  /* Nothing changed, don't do anything.  */
	  value_free_to_mark (mark);
	  /* We won't stop here */
	  return WP_VALUE_NOT_CHANGED;
	}
    }
  else
    {
      /* This seems like the only logical thing to do because
         if we temporarily ignored the watchpoint, then when
         we reenter the block in which it is valid it contains
         garbage (in the case of a function, it may have two
         garbage values, one before and one after the prologue).
         So we can't even detect the first assignment to it and
         watch after that (since the garbage may or may not equal
         the first value assigned).  */
      /* We print all the stop information in print_it_typical(), but
	 in this case, by the time we call print_it_typical() this bp
	 will be deleted already. So we have no choice but print the
	 information here. */
      if (ui_out_is_mi_like_p (uiout))
	ui_out_field_string
	  (uiout, "reason", async_reason_lookup (EXEC_ASYNC_WATCHPOINT_SCOPE));
      ui_out_text (uiout, "\nWatchpoint ");
      ui_out_field_int (uiout, "wpnum", b->number);
      ui_out_text (uiout, " deleted because the program has left the block in\n\
which its expression is valid.\n");     
 
      if (b->related_breakpoint)
	b->related_breakpoint->disposition = disp_del_at_next_stop;
      b->disposition = disp_del_at_next_stop;
 
      return WP_DELETED;
    }
}
 
/* Get a bpstat associated with having just stopped at address
   BP_ADDR in thread PTID.
 
   Determine whether we stopped at a breakpoint, etc, or whether we
   don't understand this stop.  Result is a chain of bpstat's such that:
 
   if we don't understand the stop, the result is a null pointer.
 
   if we understand why we stopped, the result is not null.
 
   Each element of the chain refers to a particular breakpoint or
   watchpoint at which we have stopped.  (We may have stopped for
   several reasons concurrently.)
 
   Each element of the chain has valid next, breakpoint_at,
   commands, FIXME??? fields.  */
 
bpstat
bpstat_stop_status (CORE_ADDR bp_addr, ptid_t ptid)
{
  struct breakpoint *b = NULL;
  const struct bp_location *bl;
  /* Root of the chain of bpstat's */
  struct bpstats root_bs[1];
  /* Pointer to the last thing in the chain currently.  */
  bpstat bs = root_bs;
  int thread_id = pid_to_thread_id (ptid);
 
  ALL_BP_LOCATIONS (bl)
  {
    b = bl->owner;
    gdb_assert (b);
    if (!breakpoint_enabled (b) && b->enable_state != bp_permanent)
      continue;
 
    if (b->type != bp_watchpoint
	&& b->type != bp_hardware_watchpoint
	&& b->type != bp_read_watchpoint
	&& b->type != bp_access_watchpoint
	&& b->type != bp_hardware_breakpoint
	&& b->type != bp_catch_fork
	&& b->type != bp_catch_vfork
	&& b->type != bp_catch_exec)	/* a non-watchpoint bp */
      {
	if (bl->address != bp_addr) 	/* address doesn't match */
	  continue;
	if (overlay_debugging		/* unmapped overlay section */
	    && section_is_overlay (bl->section) 
	    && !section_is_mapped (bl->section))
	  continue;
      }
 
    /* Continuable hardware watchpoints are treated as non-existent if the
       reason we stopped wasn't a hardware watchpoint (we didn't stop on
       some data address).  Otherwise gdb won't stop on a break instruction
       in the code (not from a breakpoint) when a hardware watchpoint has
       been defined.  Also skip watchpoints which we know did not trigger
       (did not match the data address).  */
 
    if ((b->type == bp_hardware_watchpoint
	 || b->type == bp_read_watchpoint
	 || b->type == bp_access_watchpoint)
	&& b->watchpoint_triggered == watch_triggered_no)
      continue;
 
    if (b->type == bp_hardware_breakpoint)
      {
	if (bl->address != bp_addr)
	  continue;
	if (overlay_debugging		/* unmapped overlay section */
	    && section_is_overlay (bl->section) 
	    && !section_is_mapped (bl->section))
	  continue;
      }
 
    /* Is this a catchpoint of a load or unload?  If so, did we
       get a load or unload of the specified library?  If not,
       ignore it. */
    if ((b->type == bp_catch_load)
#if defined(SOLIB_HAVE_LOAD_EVENT)
	&& (!SOLIB_HAVE_LOAD_EVENT (PIDGET (inferior_ptid))
	    || ((b->dll_pathname != NULL)
		&& (strcmp (b->dll_pathname, 
			    SOLIB_LOADED_LIBRARY_PATHNAME (
			      PIDGET (inferior_ptid)))
		    != 0)))
#endif
      )
      continue;
 
    if ((b->type == bp_catch_unload)
#if defined(SOLIB_HAVE_UNLOAD_EVENT)
	&& (!SOLIB_HAVE_UNLOAD_EVENT (PIDGET (inferior_ptid))
	    || ((b->dll_pathname != NULL)
		&& (strcmp (b->dll_pathname, 
			    SOLIB_UNLOADED_LIBRARY_PATHNAME (
			      PIDGET (inferior_ptid)))
		    != 0)))
#endif
      )
      continue;
 
    if ((b->type == bp_catch_fork)
	&& !inferior_has_forked (PIDGET (inferior_ptid),
				 &b->forked_inferior_pid))
      continue;
 
    if ((b->type == bp_catch_vfork)
	&& !inferior_has_vforked (PIDGET (inferior_ptid),
				  &b->forked_inferior_pid))
      continue;
 
    if ((b->type == bp_catch_exec)
	&& !inferior_has_execd (PIDGET (inferior_ptid), &b->exec_pathname))
      continue;
 
    /* For hardware watchpoints, we look only at the first location.
       The watchpoint_check function will work on entire expression,
       not the individual locations.  For read watchopints, the
       watchpoints_triggered function have checked all locations
       alrea
     */
    if (b->type == bp_hardware_watchpoint && bl != b->loc)
      continue;
 
    /* Come here if it's a watchpoint, or if the break address matches */
 
    bs = bpstat_alloc (bl, bs);	/* Alloc a bpstat to explain stop */
 
    /* Watchpoints may change this, if not found to have triggered. */
    bs->stop = 1;
    bs->print = 1;
 
    if (b->type == bp_watchpoint
	|| b->type == bp_read_watchpoint
	|| b->type == bp_access_watchpoint
	|| b->type == bp_hardware_watchpoint)
      {
	CORE_ADDR addr;
	struct value *v;
	int must_check_value = 0;
 
 	if (b->type == bp_watchpoint)
	  /* For a software watchpoint, we must always check the
	     watched value.  */
	  must_check_value = 1;
	else if (b->watchpoint_triggered == watch_triggered_yes)
	  /* We have a hardware watchpoint (read, write, or access)
	     and the target earlier reported an address watched by
	     this watchpoint.  */
	  must_check_value = 1;
	else if (b->watchpoint_triggered == watch_triggered_unknown
		 && b->type == bp_hardware_watchpoint)
	  /* We were stopped by a hardware watchpoint, but the target could
	     not report the data address.  We must check the watchpoint's
	     value.  Access and read watchpoints are out of luck; without
	     a data address, we can't figure it out.  */
	  must_check_value = 1;
 
 	if (must_check_value)
	  {
	    char *message = xstrprintf ("Error evaluating expression for watchpoint %d\n",
					b->number);
	    struct cleanup *cleanups = make_cleanup (xfree, message);
	    int e = catch_errors (watchpoint_check, bs, message,
				  RETURN_MASK_ALL);
	    do_cleanups (cleanups);
	    switch (e)
	      {
	      case WP_DELETED:
		/* We've already printed what needs to be printed.  */
		bs->print_it = print_it_done;
		/* Stop.  */
		break;
	      case WP_VALUE_CHANGED:
		/* NOTE: Jeremy Bennett, 13-Aug-08: Code used to check if the
		   value had changed, and if so disallow the watchpoint. The
		   test was not reliable - trust the HW on this one */
		++(b->hit_count);
		break;
	      case WP_VALUE_NOT_CHANGED:
		if (b->type == bp_hardware_watchpoint
		    || b->type == bp_watchpoint)
		  {
		    /* Don't stop: write watchpoints shouldn't fire if
		       the value hasn't changed.  */
		    bs->print_it = print_it_noop;
		    bs->stop = 0;
		    continue;
		  }
		/* Stop.  */
		++(b->hit_count);
		break;
	      default:
		/* Can't happen.  */
	      case 0:
		/* Error from catch_errors.  */
		printf_filtered (_("Watchpoint %d deleted.\n"), b->number);
		if (b->related_breakpoint)
		  b->related_breakpoint->disposition = disp_del_at_next_stop;
		b->disposition = disp_del_at_next_stop;
		/* We've already printed what needs to be printed.  */
		bs->print_it = print_it_done;
		break;
	      }
	  }
	else	/* must_check_value == 0 */
	  {
	    /* This is a case where some watchpoint(s) triggered, but
	       not at the address of this watchpoint, or else no
	       watchpoint triggered after all.  So don't print
	       anything for this watchpoint.  */
	    bs->print_it = print_it_noop;
	    bs->stop = 0;
            continue;
	  }
      }
    else
      {
	/* By definition, an encountered breakpoint is a triggered
	   breakpoint. */
	++(b->hit_count);
      }
 
    if (frame_id_p (b->frame_id)
	&& !frame_id_eq (b->frame_id, get_frame_id (get_current_frame ())))
      bs->stop = 0;
    else
      {
	int value_is_zero = 0;
 
	/* If this is a scope breakpoint, mark the associated
	   watchpoint as triggered so that we will handle the
	   out-of-scope event.  We'll get to the watchpoint next
	   iteration.  */
	if (b->type == bp_watchpoint_scope)
	  b->related_breakpoint->watchpoint_triggered = watch_triggered_yes;
 
	if (bl->cond && bl->owner->disposition != disp_del_at_next_stop)
	  {
	    /* Need to select the frame, with all that implies
	       so that the conditions will have the right context.  */
	    select_frame (get_current_frame ());
	    value_is_zero
	      = catch_errors (breakpoint_cond_eval, (bl->cond),
			      "Error in testing breakpoint condition:\n",
			      RETURN_MASK_ALL);
	    /* FIXME-someday, should give breakpoint # */
	    free_all_values ();
	  }
	if (bl->cond && value_is_zero)
	  {
	    bs->stop = 0;
	    /* Don't consider this a hit.  */
	    --(b->hit_count);
	  }
	else if (b->thread != -1 && b->thread != thread_id)
	  {
	    bs->stop = 0;
	    /* Don't consider this a hit.  */
	    --(b->hit_count);
	  }
	else if (b->ignore_count > 0)
	  {
	    b->ignore_count--;
	    annotate_ignore_count_change ();
	    bs->stop = 0;
	  }
	else if (b->type == bp_thread_event || b->type == bp_overlay_event)
	  /* We do not stop for these.  */
	  bs->stop = 0;
	else
	  {
	    /* We will stop here */
	    if (b->disposition == disp_disable)
	      b->enable_state = bp_disabled;
	    if (b->silent)
	      bs->print = 0;
	    bs->commands = b->commands;
	    if (bs->commands &&
		(strcmp ("silent", bs->commands->line) == 0
		 || (xdb_commands && strcmp ("Q", bs->commands->line) == 0)))
	      {
		bs->commands = bs->commands->next;
		bs->print = 0;
	      }
	    bs->commands = copy_command_lines (bs->commands);
	  }
      }
    /* Print nothing for this entry if we dont stop or if we dont print.  */
    if (bs->stop == 0 || bs->print == 0)
      bs->print_it = print_it_noop;
  }
 
  bs->next = NULL;		/* Terminate the chain */
  bs = root_bs->next;		/* Re-grab the head of the chain */
 
  /* If we aren't stopping, the value of some hardware watchpoint may
     not have changed, but the intermediate memory locations we are
     watching may have.  Don't bother if we're stopping; this will get
     done later.  */
  for (bs = root_bs->next; bs != NULL; bs = bs->next)
    if (bs->stop)
      break;
 
  if (bs == NULL)
    for (bs = root_bs->next; bs != NULL; bs = bs->next)
      if (!bs->stop
	  && (bs->breakpoint_at->owner->type == bp_hardware_watchpoint
	      || bs->breakpoint_at->owner->type == bp_read_watchpoint
	      || bs->breakpoint_at->owner->type == bp_access_watchpoint))
	{
	  /* remove/insert can invalidate bs->breakpoint_at, if this
	     location is no longer used by the watchpoint.  Prevent
	     further code from trying to use it.  */
	  bs->breakpoint_at = NULL;
	  remove_breakpoints ();
	  insert_breakpoints ();
	  break;
	}
 
  return root_bs->next;
}

/* Tell what to do about this bpstat.  */
struct bpstat_what
bpstat_what (bpstat bs)
{
  /* Classify each bpstat as one of the following.  */
  enum class
    {
      /* This bpstat element has no effect on the main_action.  */
      no_effect = 0,
 
      /* There was a watchpoint, stop but don't print.  */
      wp_silent,
 
      /* There was a watchpoint, stop and print.  */
      wp_noisy,
 
      /* There was a breakpoint but we're not stopping.  */
      bp_nostop,
 
      /* There was a breakpoint, stop but don't print.  */
      bp_silent,
 
      /* There was a breakpoint, stop and print.  */
      bp_noisy,
 
      /* We hit the longjmp breakpoint.  */
      long_jump,
 
      /* We hit the longjmp_resume breakpoint.  */
      long_resume,
 
      /* We hit the step_resume breakpoint.  */
      step_resume,
 
      /* We hit the shared library event breakpoint.  */
      shlib_event,
 
      /* We caught a shared library event.  */
      catch_shlib_event,
 
      /* This is just used to count how many enums there are.  */
      class_last
    };
 
  /* Here is the table which drives this routine.  So that we can
     format it pretty, we define some abbreviations for the
     enum bpstat_what codes.  */
#define kc BPSTAT_WHAT_KEEP_CHECKING
#define ss BPSTAT_WHAT_STOP_SILENT
#define sn BPSTAT_WHAT_STOP_NOISY
#define sgl BPSTAT_WHAT_SINGLE
#define slr BPSTAT_WHAT_SET_LONGJMP_RESUME
#define clr BPSTAT_WHAT_CLEAR_LONGJMP_RESUME
#define clrs BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE
#define sr BPSTAT_WHAT_STEP_RESUME
#define shl BPSTAT_WHAT_CHECK_SHLIBS
#define shlr BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK
 
/* "Can't happen."  Might want to print an error message.
   abort() is not out of the question, but chances are GDB is just
   a bit confused, not unusable.  */
#define err BPSTAT_WHAT_STOP_NOISY
 
  /* Given an old action and a class, come up with a new action.  */
  /* One interesting property of this table is that wp_silent is the same
     as bp_silent and wp_noisy is the same as bp_noisy.  That is because
     after stopping, the check for whether to step over a breakpoint
     (BPSTAT_WHAT_SINGLE type stuff) is handled in proceed() without
     reference to how we stopped.  We retain separate wp_silent and
     bp_silent codes in case we want to change that someday. 
 
     Another possibly interesting property of this table is that
     there's a partial ordering, priority-like, of the actions.  Once
     you've decided that some action is appropriate, you'll never go
     back and decide something of a lower priority is better.  The
     ordering is:
 
     kc   < clr sgl shl shlr slr sn sr ss
     sgl  < clrs shl shlr slr sn sr ss
     slr  < err shl shlr sn sr ss
     clr  < clrs err shl shlr sn sr ss
     clrs < err shl shlr sn sr ss
     ss   < shl shlr sn sr
     sn   < shl shlr sr
     shl  < shlr sr
     shlr < sr
     sr   <
 
     What I think this means is that we don't need a damned table
     here.  If you just put the rows and columns in the right order,
     it'd look awfully regular.  We could simply walk the bpstat list
     and choose the highest priority action we find, with a little
     logic to handle the 'err' cases, and the CLEAR_LONGJMP_RESUME/
     CLEAR_LONGJMP_RESUME_SINGLE distinction (which breakpoint.h says
     is messy anyway).  */
 
  /* step_resume entries: a step resume breakpoint overrides another
     breakpoint of signal handling (see comment in wait_for_inferior
     at where we set the step_resume breakpoint).  */
 
  static const enum bpstat_what_main_action
    table[(int) class_last][(int) BPSTAT_WHAT_LAST] =
  {
  /*                              old action */
  /*       kc    ss    sn    sgl    slr   clr    clrs   sr   shl   shlr
   */
/*no_effect */
    {kc, ss, sn, sgl, slr, clr, clrs, sr, shl, shlr},
/*wp_silent */
    {ss, ss, sn, ss, ss, ss, ss, sr, shl, shlr},
/*wp_noisy */
    {sn, sn, sn, sn, sn, sn, sn, sr, shl, shlr},
/*bp_nostop */
    {sgl, ss, sn, sgl, slr, clrs, clrs, sr, shl, shlr},
/*bp_silent */
    {ss, ss, sn, ss, ss, ss, ss, sr, shl, shlr},
/*bp_noisy */
    {sn, sn, sn, sn, sn, sn, sn, sr, shl, shlr},
/*long_jump */
    {slr, ss, sn, slr, slr, err, err, sr, shl, shlr},
/*long_resume */
    {clr, ss, sn, clrs, err, err, err, sr, shl, shlr},
/*step_resume */
    {sr, sr, sr, sr, sr, sr, sr, sr, sr, sr},
/*shlib */
    {shl, shl, shl, shl, shl, shl, shl, sr, shl, shlr},
/*catch_shlib */
    {shlr, shlr, shlr, shlr, shlr, shlr, shlr, sr, shlr, shlr}
  };
 
#undef kc
#undef ss
#undef sn
#undef sgl
#undef slr
#undef clr
#undef clrs
#undef err
#undef sr
#undef ts
#undef shl
#undef shlr
  enum bpstat_what_main_action current_action = BPSTAT_WHAT_KEEP_CHECKING;
  struct bpstat_what retval;
 
  retval.call_dummy = 0;
  for (; bs != NULL; bs = bs->next)
    {
      enum class bs_class = no_effect;
      if (bs->breakpoint_at == NULL)
	/* I suspect this can happen if it was a momentary breakpoint
	   which has since been deleted.  */
	continue;
      switch (bs->breakpoint_at->owner->type)
	{
	case bp_none:
	  continue;
 
	case bp_breakpoint:
	case bp_hardware_breakpoint:
	case bp_until:
	case bp_finish:
	  if (bs->stop)
	    {
	      if (bs->print)
		bs_class = bp_noisy;
	      else
		bs_class = bp_silent;
	    }
	  else
	    bs_class = bp_nostop;
	  break;
	case bp_watchpoint:
	case bp_hardware_watchpoint:
	case bp_read_watchpoint:
	case bp_access_watchpoint:
	  if (bs->stop)
	    {
	      if (bs->print)
		bs_class = wp_noisy;
	      else
		bs_class = wp_silent;
	    }
	  else
	    /* There was a watchpoint, but we're not stopping. 
	       This requires no further action.  */
	    bs_class = no_effect;
	  break;
	case bp_longjmp:
	  bs_class = long_jump;
	  break;
	case bp_longjmp_resume:
	  bs_class = long_resume;
	  break;
	case bp_step_resume:
	  if (bs->stop)
	    {
	      bs_class = step_resume;
	    }
	  else
	    /* It is for the wrong frame.  */
	    bs_class = bp_nostop;
	  break;
	case bp_watchpoint_scope:
	  bs_class = bp_nostop;
	  break;
	case bp_shlib_event:
	  bs_class = shlib_event;
	  break;
	case bp_thread_event:
	case bp_overlay_event:
	  bs_class = bp_nostop;
	  break;
	case bp_catch_load:
	case bp_catch_unload:
	  /* Only if this catchpoint triggered should we cause the
	     step-out-of-dld behaviour.  Otherwise, we ignore this
	     catchpoint.  */
	  if (bs->stop)
	    bs_class = catch_shlib_event;
	  else
	    bs_class = no_effect;
	  break;
	case bp_catch_fork:
	case bp_catch_vfork:
	case bp_catch_exec:
	  if (bs->stop)
	    {
	      if (bs->print)
		bs_class = bp_noisy;
	      else
		bs_class = bp_silent;
	    }
	  else
	    /* There was a catchpoint, but we're not stopping.  
	       This requires no further action.  */
	    bs_class = no_effect;
	  break;
	case bp_call_dummy:
	  /* Make sure the action is stop (silent or noisy),
	     so infrun.c pops the dummy frame.  */
	  bs_class = bp_silent;
	  retval.call_dummy = 1;
	  break;
	}
      current_action = table[(int) bs_class][(int) current_action];
    }
  retval.main_action = current_action;
  return retval;
}
 
/* Nonzero if we should step constantly (e.g. watchpoints on machines
   without hardware support).  This isn't related to a specific bpstat,
   just to things like whether watchpoints are set.  */
 
int
bpstat_should_step (void)
{
  struct breakpoint *b;
  ALL_BREAKPOINTS (b)
    if (breakpoint_enabled (b) && b->type == bp_watchpoint)
      return 1;
  return 0;
}
 

 
/* Given a bpstat that records zero or more triggered eventpoints, this
   function returns another bpstat which contains only the catchpoints
   on that first list, if any. */
void
bpstat_get_triggered_catchpoints (bpstat ep_list, bpstat *cp_list)
{
  struct bpstats root_bs[1];
  bpstat bs = root_bs;
  struct breakpoint *ep;
  char *dll_pathname;
 
  bpstat_clear (cp_list);
  root_bs->next = NULL;
 
  for (; ep_list != NULL; ep_list = ep_list->next)
    {
      /* Is this eventpoint a catchpoint?  If not, ignore it. */
      ep = ep_list->breakpoint_at->owner;
      if (ep == NULL)
	break;
      if ((ep->type != bp_catch_load) &&
	  (ep->type != bp_catch_unload))
	/* pai: (temp) ADD fork/vfork here!!  */
	continue;
 
      /* Yes; add it to the list. */
      bs = bpstat_alloc (ep_list->breakpoint_at, bs);
      *bs = *ep_list;
      bs->next = NULL;
      bs = root_bs->next;
 
#if defined(SOLIB_ADD)
      /* Also, for each triggered catchpoint, tag it with the name of
         the library that caused this trigger.  (We copy the name now,
         because it's only guaranteed to be available NOW, when the
         catchpoint triggers.  Clients who may wish to know the name
         later must get it from the catchpoint itself.) */
      if (ep->triggered_dll_pathname != NULL)
	xfree (ep->triggered_dll_pathname);
      if (ep->type == bp_catch_load)
	dll_pathname = SOLIB_LOADED_LIBRARY_PATHNAME (
	                 PIDGET (inferior_ptid));
      else
	dll_pathname = SOLIB_UNLOADED_LIBRARY_PATHNAME (
	                 PIDGET (inferior_ptid));
#else
      dll_pathname = NULL;
#endif
      if (dll_pathname)
	{
	  ep->triggered_dll_pathname = (char *) 
	    xmalloc (strlen (dll_pathname) + 1);
	  strcpy (ep->triggered_dll_pathname, dll_pathname);
	}
      else
	ep->triggered_dll_pathname = NULL;
    }
 
  *cp_list = bs;
}
 
static void print_breakpoint_location (struct breakpoint *b,
				       struct bp_location *loc,
				       char *wrap_indent,
				       struct ui_stream *stb)
{
  if (b->source_file)
    {
      struct symbol *sym 
	= find_pc_sect_function (loc->address, loc->section);
      if (sym)
	{
	  ui_out_text (uiout, "in ");
	  ui_out_field_string (uiout, "func",
			       SYMBOL_PRINT_NAME (sym));
	  ui_out_wrap_hint (uiout, wrap_indent);
	  ui_out_text (uiout, " at ");
	}
      ui_out_field_string (uiout, "file", b->source_file);
      ui_out_text (uiout, ":");
 
      if (ui_out_is_mi_like_p (uiout))
	{
	  struct symtab_and_line sal = find_pc_line (loc->address, 0);
	  char *fullname = symtab_to_fullname (sal.symtab);
 
	  if (fullname)
	    ui_out_field_string (uiout, "fullname", fullname);
	}
 
      ui_out_field_int (uiout, "line", b->line_number);
    }
  else if (!b->loc)
    {
      ui_out_field_string (uiout, "pending", b->addr_string);
    }
  else
    {
      print_address_symbolic (loc->address, stb->stream, demangle, "");
      ui_out_field_stream (uiout, "at", stb);
    }
}
 
/* Print B to gdb_stdout. */
static void
print_one_breakpoint_location (struct breakpoint *b,
			       struct bp_location *loc,
			       int loc_number,
			       CORE_ADDR *last_addr)
{
  struct command_line *l;
  struct symbol *sym;
  struct ep_type_description
    {
      enum bptype type;
      char *description;
    };
  static struct ep_type_description bptypes[] =
  {
    {bp_none, "?deleted?"},
    {bp_breakpoint, "breakpoint"},
    {bp_hardware_breakpoint, "hw breakpoint"},
    {bp_until, "until"},
    {bp_finish, "finish"},
    {bp_watchpoint, "watchpoint"},
    {bp_hardware_watchpoint, "hw watchpoint"},
    {bp_read_watchpoint, "read watchpoint"},
    {bp_access_watchpoint, "acc watchpoint"},
    {bp_longjmp, "longjmp"},
    {bp_longjmp_resume, "longjmp resume"},
    {bp_step_resume, "step resume"},
    {bp_watchpoint_scope, "watchpoint scope"},
    {bp_call_dummy, "call dummy"},
    {bp_shlib_event, "shlib events"},
    {bp_thread_event, "thread events"},
    {bp_overlay_event, "overlay events"},
    {bp_catch_load, "catch load"},
    {bp_catch_unload, "catch unload"},
    {bp_catch_fork, "catch fork"},
    {bp_catch_vfork, "catch vfork"},
    {bp_catch_exec, "catch exec"}
  };
 
  static char *bpdisps[] =
  {"del", "dstp", "dis", "keep"};
  static char bpenables[] = "nynny";
  char wrap_indent[80];
  struct ui_stream *stb = ui_out_stream_new (uiout);
  struct cleanup *old_chain = make_cleanup_ui_out_stream_delete (stb);
  struct cleanup *bkpt_chain;
 
  int header_of_multiple = 0;
  int part_of_multiple = (loc != NULL);
 
  gdb_assert (!loc || loc_number != 0);
  /* See comment in print_one_breakpoint concerning
     treatment of breakpoints with single disabled
     location.  */
  if (loc == NULL 
      && (b->loc != NULL 
	  && (b->loc->next != NULL || !b->loc->enabled)))
    header_of_multiple = 1;
  if (loc == NULL)
    loc = b->loc;
 
  annotate_record ();
  bkpt_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "bkpt");
 
  /* 1 */
  annotate_field (0);
  if (part_of_multiple)
    {
      char *formatted;
      formatted = xstrprintf ("%d.%d", b->number, loc_number);
      ui_out_field_string (uiout, "number", formatted);
      xfree (formatted);
    }
  else
    {
      ui_out_field_int (uiout, "number", b->number);
    }
 
  /* 2 */
  annotate_field (1);
  if (part_of_multiple)
    ui_out_field_skip (uiout, "type");
  else 
    {
      if (((int) b->type >= (sizeof (bptypes) / sizeof (bptypes[0])))
	  || ((int) b->type != bptypes[(int) b->type].type))
	internal_error (__FILE__, __LINE__,
			_("bptypes table does not describe type #%d."),
			(int) b->type);
      ui_out_field_string (uiout, "type", bptypes[(int) b->type].description);
    }
 
  /* 3 */
  annotate_field (2);
  if (part_of_multiple)
    ui_out_field_skip (uiout, "disp");
  else
    ui_out_field_string (uiout, "disp", bpdisps[(int) b->disposition]);
 
 
  /* 4 */
  annotate_field (3);
  if (part_of_multiple)
    ui_out_field_string (uiout, "enabled", loc->enabled ? "y" : "n");
  else
      ui_out_field_fmt (uiout, "enabled", "%c", 
 			bpenables[(int) b->enable_state]);
  ui_out_spaces (uiout, 2);
 
 
  /* 5 and 6 */
  strcpy (wrap_indent, "                           ");
  if (addressprint)
    {
      if (gdbarch_addr_bit (current_gdbarch) <= 32)
	strcat (wrap_indent, "           ");
      else
	strcat (wrap_indent, "                   ");
    }
 
  if (b->ops != NULL && b->ops->print_one != NULL)
    {
      /* Although the print_one can possibly print
	 all locations,  calling it here is not likely
	 to get any nice result.  So, make sure there's
	 just one location.  */
      gdb_assert (b->loc == NULL || b->loc->next == NULL);
      b->ops->print_one (b, last_addr);
    }
  else
    switch (b->type)
      {
      case bp_none:
	internal_error (__FILE__, __LINE__,
			_("print_one_breakpoint: bp_none encountered\n"));
	break;
 
      case bp_watchpoint:
      case bp_hardware_watchpoint:
      case bp_read_watchpoint:
      case bp_access_watchpoint:
	/* Field 4, the address, is omitted (which makes the columns
	   not line up too nicely with the headers, but the effect
	   is relatively readable).  */
	if (addressprint)
	  ui_out_field_skip (uiout, "addr");
	annotate_field (5);
	print_expression (b->exp, stb->stream);
	ui_out_field_stream (uiout, "what", stb);
	break;
 
      case bp_catch_load:
      case bp_catch_unload:
	/* Field 4, the address, is omitted (which makes the columns
	   not line up too nicely with the headers, but the effect
	   is relatively readable).  */
	if (addressprint)
	  ui_out_field_skip (uiout, "addr");
	annotate_field (5);
	if (b->dll_pathname == NULL)
	  {
	    ui_out_field_string (uiout, "what", "<any library>");
	    ui_out_spaces (uiout, 1);
	  }
	else
	  {
	    ui_out_text (uiout, "library \"");
	    ui_out_field_string (uiout, "what", b->dll_pathname);
	    ui_out_text (uiout, "\" ");
	  }
	break;
 
      case bp_catch_fork:
      case bp_catch_vfork:
	/* Field 4, the address, is omitted (which makes the columns
	   not line up too nicely with the headers, but the effect
	   is relatively readable).  */
	if (addressprint)
	  ui_out_field_skip (uiout, "addr");
	annotate_field (5);
	if (b->forked_inferior_pid != 0)
	  {
	    ui_out_text (uiout, "process ");
	    ui_out_field_int (uiout, "what", b->forked_inferior_pid);
	    ui_out_spaces (uiout, 1);
	  }
	break;
 
      case bp_catch_exec:
	/* Field 4, the address, is omitted (which makes the columns
	   not line up too nicely with the headers, but the effect
	   is relatively readable).  */
	if (addressprint)
	  ui_out_field_skip (uiout, "addr");
	annotate_field (5);
	if (b->exec_pathname != NULL)
	  {
	    ui_out_text (uiout, "program \"");
	    ui_out_field_string (uiout, "what", b->exec_pathname);
	    ui_out_text (uiout, "\" ");
	  }
	break;
 
      case bp_breakpoint:
      case bp_hardware_breakpoint:
      case bp_until:
      case bp_finish:
      case bp_longjmp:
      case bp_longjmp_resume:
      case bp_step_resume:
      case bp_watchpoint_scope:
      case bp_call_dummy:
      case bp_shlib_event:
      case bp_thread_event:
      case bp_overlay_event:
	if (addressprint)
	  {
	    annotate_field (4);
	    if (header_of_multiple)
	      ui_out_field_string (uiout, "addr", "<MULTIPLE>");
	    if (b->loc == NULL || loc->shlib_disabled)
	      ui_out_field_string (uiout, "addr", "<PENDING>");
	    else
	      ui_out_field_core_addr (uiout, "addr", loc->address);
	  }
	annotate_field (5);
	if (!header_of_multiple)
	  print_breakpoint_location (b, loc, wrap_indent, stb);
	if (b->loc)
	  *last_addr = b->loc->address;
	break;
      }
 
  if (!part_of_multiple && b->thread != -1)
    {
      /* FIXME: This seems to be redundant and lost here; see the
	 "stop only in" line a little further down. */
      ui_out_text (uiout, " thread ");
      ui_out_field_int (uiout, "thread", b->thread);
    }
 
  ui_out_text (uiout, "\n");
 
  if (part_of_multiple && frame_id_p (b->frame_id))
    {
      annotate_field (6);
      ui_out_text (uiout, "\tstop only in stack frame at ");
      /* FIXME: cagney/2002-12-01: Shouldn't be poeking around inside
         the frame ID.  */
      ui_out_field_core_addr (uiout, "frame", b->frame_id.stack_addr);
      ui_out_text (uiout, "\n");
    }
 
  if (!part_of_multiple && b->cond_string && !ada_exception_catchpoint_p (b))
    {
      /* We do not print the condition for Ada exception catchpoints
         because the condition is an internal implementation detail
         that we do not want to expose to the user.  */
      annotate_field (7);
      ui_out_text (uiout, "\tstop only if ");
      ui_out_field_string (uiout, "cond", b->cond_string);
      ui_out_text (uiout, "\n");
    }
 
  if (!part_of_multiple && b->thread != -1)
    {
      /* FIXME should make an annotation for this */
      ui_out_text (uiout, "\tstop only in thread ");
      ui_out_field_int (uiout, "thread", b->thread);
      ui_out_text (uiout, "\n");
    }
 
  if (!part_of_multiple && show_breakpoint_hit_counts && b->hit_count)
    {
      /* FIXME should make an annotation for this */
      if (ep_is_catchpoint (b))
	ui_out_text (uiout, "\tcatchpoint");
      else
	ui_out_text (uiout, "\tbreakpoint");
      ui_out_text (uiout, " already hit ");
      ui_out_field_int (uiout, "times", b->hit_count);
      if (b->hit_count == 1)
	ui_out_text (uiout, " time\n");
      else
	ui_out_text (uiout, " times\n");
    }
 
  /* Output the count also if it is zero, but only if this is
     mi. FIXME: Should have a better test for this. */
  if (ui_out_is_mi_like_p (uiout))
    if (!part_of_multiple && show_breakpoint_hit_counts && b->hit_count == 0)
      ui_out_field_int (uiout, "times", b->hit_count);
 
  if (!part_of_multiple && b->ignore_count)
    {
      annotate_field (8);
      ui_out_text (uiout, "\tignore next ");
      ui_out_field_int (uiout, "ignore", b->ignore_count);
      ui_out_text (uiout, " hits\n");
    }
 
  if (!part_of_multiple && (l = b->commands))
    {
      struct cleanup *script_chain;
 
      annotate_field (9);
      script_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "script");
      print_command_lines (uiout, l, 4);
      do_cleanups (script_chain);
    }
  do_cleanups (bkpt_chain);
  do_cleanups (old_chain);
}
 
static void
print_one_breakpoint (struct breakpoint *b,
		      CORE_ADDR *last_addr)
{
  print_one_breakpoint_location (b, NULL, 0, last_addr);
 
  /* If this breakpoint has custom print function,
     it's already printed.  Otherwise, print individual
     locations, if any.  */
  if (b->ops == NULL || b->ops->print_one == NULL)
    {
      /* If breakpoint has a single location that is
	 disabled, we print it as if it had
	 several locations, since otherwise it's hard to
	 represent "breakpoint enabled, location disabled"
	 situation.  
	 Note that while hardware watchpoints have
	 several locations internally, that's no a property
	 exposed to user.  */
      if (b->loc 
	  && !is_hardware_watchpoint (b)
	  && (b->loc->next || !b->loc->enabled)
	  && !ui_out_is_mi_like_p (uiout)) 
	{
	  struct bp_location *loc;
	  int n = 1;
	  for (loc = b->loc; loc; loc = loc->next, ++n)
	    print_one_breakpoint_location (b, loc, n, last_addr);
	}
    }
}
 
 
struct captured_breakpoint_query_args
  {
    int bnum;
  };
 
static int
do_captured_breakpoint_query (struct ui_out *uiout, void *data)
{
  struct captured_breakpoint_query_args *args = data;
  struct breakpoint *b;
  CORE_ADDR dummy_addr = 0;
  ALL_BREAKPOINTS (b)
    {
      if (args->bnum == b->number)
	{
	  print_one_breakpoint (b, &dummy_addr);
	  return GDB_RC_OK;
	}
    }
  return GDB_RC_NONE;
}
 
enum gdb_rc
gdb_breakpoint_query (struct ui_out *uiout, int bnum, char **error_message)
{
  struct captured_breakpoint_query_args args;
  args.bnum = bnum;
  /* For the moment we don't trust print_one_breakpoint() to not throw
     an error. */
  if (catch_exceptions_with_msg (uiout, do_captured_breakpoint_query, &args,
				 error_message, RETURN_MASK_ALL) < 0)
    return GDB_RC_FAIL;
  else
    return GDB_RC_OK;
}
 
/* Return non-zero if B is user settable (breakpoints, watchpoints,
   catchpoints, et.al.). */
 
static int
user_settable_breakpoint (const struct breakpoint *b)
{
  return (b->type == bp_breakpoint
	  || b->type == bp_catch_load
	  || b->type == bp_catch_unload
	  || b->type == bp_catch_fork
	  || b->type == bp_catch_vfork
	  || b->type == bp_catch_exec
	  || b->type == bp_hardware_breakpoint
	  || b->type == bp_watchpoint
	  || b->type == bp_read_watchpoint
	  || b->type == bp_access_watchpoint
	  || b->type == bp_hardware_watchpoint);
}
 
/* Print information on user settable breakpoint (watchpoint, etc)
   number BNUM.  If BNUM is -1 print all user settable breakpoints.
   If ALLFLAG is non-zero, include non- user settable breakpoints. */
 
static void
breakpoint_1 (int bnum, int allflag)
{
  struct breakpoint *b;
  CORE_ADDR last_addr = (CORE_ADDR) -1;
  int nr_printable_breakpoints;
  struct cleanup *bkpttbl_chain;
 
  /* Compute the number of rows in the table. */
  nr_printable_breakpoints = 0;
  ALL_BREAKPOINTS (b)
    if (bnum == -1
	|| bnum == b->number)
      {
	if (allflag || user_settable_breakpoint (b))
	  nr_printable_breakpoints++;
      }
 
  if (addressprint)
    bkpttbl_chain 
      = make_cleanup_ui_out_table_begin_end (uiout, 6, nr_printable_breakpoints,
                                             "BreakpointTable");
  else
    bkpttbl_chain 
      = make_cleanup_ui_out_table_begin_end (uiout, 5, nr_printable_breakpoints,
                                             "BreakpointTable");
 
  if (nr_printable_breakpoints > 0)
    annotate_breakpoints_headers ();
  if (nr_printable_breakpoints > 0)
    annotate_field (0);
  ui_out_table_header (uiout, 7, ui_left, "number", "Num");		/* 1 */
  if (nr_printable_breakpoints > 0)
    annotate_field (1);
  ui_out_table_header (uiout, 14, ui_left, "type", "Type");		/* 2 */
  if (nr_printable_breakpoints > 0)
    annotate_field (2);
  ui_out_table_header (uiout, 4, ui_left, "disp", "Disp");		/* 3 */
  if (nr_printable_breakpoints > 0)
    annotate_field (3);
  ui_out_table_header (uiout, 3, ui_left, "enabled", "Enb");	/* 4 */
  if (addressprint)
	{
	  if (nr_printable_breakpoints > 0)
	    annotate_field (4);
	  if (gdbarch_addr_bit (current_gdbarch) <= 32)
	    ui_out_table_header (uiout, 10, ui_left, "addr", "Address");/* 5 */
	  else
	    ui_out_table_header (uiout, 18, ui_left, "addr", "Address");/* 5 */
	}
  if (nr_printable_breakpoints > 0)
    annotate_field (5);
  ui_out_table_header (uiout, 40, ui_noalign, "what", "What");	/* 6 */
  ui_out_table_body (uiout);
  if (nr_printable_breakpoints > 0)
    annotate_breakpoints_table ();
 
  ALL_BREAKPOINTS (b)
    if (bnum == -1
	|| bnum == b->number)
      {
	/* We only print out user settable breakpoints unless the
	   allflag is set. */
	if (allflag || user_settable_breakpoint (b))
	  print_one_breakpoint (b, &last_addr);
      }
 
  do_cleanups (bkpttbl_chain);
 
  if (nr_printable_breakpoints == 0)
    {
      if (bnum == -1)
	ui_out_message (uiout, 0, "No breakpoints or watchpoints.\n");
      else
	ui_out_message (uiout, 0, "No breakpoint or watchpoint number %d.\n",
			bnum);
    }
  else
    {
      /* Compare against (CORE_ADDR)-1 in case some compiler decides
	 that a comparison of an unsigned with -1 is always false.  */
      if (last_addr != (CORE_ADDR) -1 && !server_command)
	set_next_address (last_addr);
    }
 
  /* FIXME? Should this be moved up so that it is only called when
     there have been breakpoints? */
  annotate_breakpoints_table_end ();
}
 
static void
breakpoints_info (char *bnum_exp, int from_tty)
{
  int bnum = -1;
 
  if (bnum_exp)
    bnum = parse_and_eval_long (bnum_exp);
 
  breakpoint_1 (bnum, 0);
}
 
static void
maintenance_info_breakpoints (char *bnum_exp, int from_tty)
{
  int bnum = -1;
 
  if (bnum_exp)
    bnum = parse_and_eval_long (bnum_exp);
 
  breakpoint_1 (bnum, 1);
}
 
static int
breakpoint_has_pc (struct breakpoint *b, CORE_ADDR pc, asection *section)
{
  struct bp_location *bl = b->loc;
  for (; bl; bl = bl->next)
    {
      if (bl->address == pc
	  && (!overlay_debugging || bl->section == section))
	return 1;	  
    }
  return 0;
}
 
/* Print a message describing any breakpoints set at PC.  */
 
static void
describe_other_breakpoints (CORE_ADDR pc, asection *section, int thread)
{
  int others = 0;
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
    others += breakpoint_has_pc (b, pc, section);
  if (others > 0)
    {
      if (others == 1)
	printf_filtered (_("Note: breakpoint "));
      else /* if (others == ???) */
	printf_filtered (_("Note: breakpoints "));
      ALL_BREAKPOINTS (b)
	if (breakpoint_has_pc (b, pc, section))
	  {
	    others--;
	    printf_filtered ("%d", b->number);
	    if (b->thread == -1 && thread != -1)
	      printf_filtered (" (all threads)");
	    else if (b->thread != -1)
	      printf_filtered (" (thread %d)", b->thread);
	    printf_filtered ("%s%s ",
			     ((b->enable_state == bp_disabled || 
			       b->enable_state == bp_call_disabled) 
			      ? " (disabled)"
			      : b->enable_state == bp_permanent 
			      ? " (permanent)"
			      : ""),
			     (others > 1) ? "," 
			     : ((others == 1) ? " and" : ""));
	  }
      printf_filtered (_("also set at pc "));
      fputs_filtered (paddress (pc), gdb_stdout);
      printf_filtered (".\n");
    }
}

/* Set the default place to put a breakpoint
   for the `break' command with no arguments.  */
 
void
set_default_breakpoint (int valid, CORE_ADDR addr, struct symtab *symtab,
			int line)
{
  default_breakpoint_valid = valid;
  default_breakpoint_address = addr;
  default_breakpoint_symtab = symtab;
  default_breakpoint_line = line;
}
 
/* Return true iff it is meaningful to use the address member of
   BPT.  For some breakpoint types, the address member is irrelevant
   and it makes no sense to attempt to compare it to other addresses
   (or use it for any other purpose either).
 
   More specifically, each of the following breakpoint types will always
   have a zero valued address and we don't want check_duplicates() to mark
   breakpoints of any of these types to be a duplicate of an actual
   breakpoint at address zero:
 
      bp_watchpoint
      bp_hardware_watchpoint
      bp_read_watchpoint
      bp_access_watchpoint
      bp_catch_exec
      bp_longjmp_resume
      bp_catch_fork
      bp_catch_vork */
 
static int
breakpoint_address_is_meaningful (struct breakpoint *bpt)
{
  enum bptype type = bpt->type;
 
  return (type != bp_watchpoint
	  && type != bp_hardware_watchpoint
	  && type != bp_read_watchpoint
	  && type != bp_access_watchpoint
	  && type != bp_catch_exec
	  && type != bp_longjmp_resume
	  && type != bp_catch_fork
	  && type != bp_catch_vfork);
}
 
/* Rescan breakpoints at the same address and section as BPT,
   marking the first one as "first" and any others as "duplicates".
   This is so that the bpt instruction is only inserted once.
   If we have a permanent breakpoint at the same place as BPT, make
   that one the official one, and the rest as duplicates.  */
 
static void
check_duplicates_for (CORE_ADDR address, asection *section)
{
  struct bp_location *b;
  int count = 0;
  struct bp_location *perm_bp = 0;
 
  ALL_BP_LOCATIONS (b)
    if (b->owner->enable_state != bp_disabled
	&& b->owner->enable_state != bp_call_disabled
	&& b->enabled
	&& !b->shlib_disabled
	&& b->address == address	/* address / overlay match */
	&& (!overlay_debugging || b->section == section)
	&& breakpoint_address_is_meaningful (b->owner))
    {
      /* Have we found a permanent breakpoint?  */
      if (b->owner->enable_state == bp_permanent)
	{
	  perm_bp = b;
	  break;
	}
 
      count++;
      b->duplicate = count > 1;
    }
 
  /* If we found a permanent breakpoint at this address, go over the
     list again and declare all the other breakpoints there to be the
     duplicates.  */
  if (perm_bp)
    {
      perm_bp->duplicate = 0;
 
      /* Permanent breakpoint should always be inserted.  */
      if (! perm_bp->inserted)
	internal_error (__FILE__, __LINE__,
			_("allegedly permanent breakpoint is not "
			"actually inserted"));
 
      ALL_BP_LOCATIONS (b)
	if (b != perm_bp)
	  {
	    if (b->owner->enable_state != bp_disabled
		&& b->owner->enable_state != bp_call_disabled
		&& b->enabled && !b->shlib_disabled		
		&& b->address == address	/* address / overlay match */
		&& (!overlay_debugging || b->section == section)
		&& breakpoint_address_is_meaningful (b->owner))
	      {
		if (b->inserted)
		  internal_error (__FILE__, __LINE__,
				  _("another breakpoint was inserted on top of "
				  "a permanent breakpoint"));
 
		b->duplicate = 1;
	      }
	  }
    }
}
 
static void
check_duplicates (struct breakpoint *bpt)
{
  struct bp_location *bl = bpt->loc;
 
  if (! breakpoint_address_is_meaningful (bpt))
    return;
 
  for (; bl; bl = bl->next)
    check_duplicates_for (bl->address, bl->section);    
}
 
static void
breakpoint_adjustment_warning (CORE_ADDR from_addr, CORE_ADDR to_addr,
                               int bnum, int have_bnum)
{
  char astr1[40];
  char astr2[40];
 
  strcpy (astr1, hex_string_custom ((unsigned long) from_addr, 8));
  strcpy (astr2, hex_string_custom ((unsigned long) to_addr, 8));
  if (have_bnum)
    warning (_("Breakpoint %d address previously adjusted from %s to %s."),
             bnum, astr1, astr2);
  else
    warning (_("Breakpoint address adjusted from %s to %s."), astr1, astr2);
}
 
/* Adjust a breakpoint's address to account for architectural constraints
   on breakpoint placement.  Return the adjusted address.  Note: Very
   few targets require this kind of adjustment.  For most targets,
   this function is simply the identity function.  */
 
static CORE_ADDR
adjust_breakpoint_address (CORE_ADDR bpaddr, enum bptype bptype)
{
  if (!gdbarch_adjust_breakpoint_address_p (current_gdbarch))
    {
      /* Very few targets need any kind of breakpoint adjustment.  */
      return bpaddr;
    }
  else if (bptype == bp_watchpoint
           || bptype == bp_hardware_watchpoint
           || bptype == bp_read_watchpoint
           || bptype == bp_access_watchpoint
           || bptype == bp_catch_fork
           || bptype == bp_catch_vfork
           || bptype == bp_catch_exec)
    {
      /* Watchpoints and the various bp_catch_* eventpoints should not
         have their addresses modified.  */
      return bpaddr;
    }
  else
    {
      CORE_ADDR adjusted_bpaddr;
 
      /* Some targets have architectural constraints on the placement
         of breakpoint instructions.  Obtain the adjusted address.  */
      adjusted_bpaddr = gdbarch_adjust_breakpoint_address (current_gdbarch,
                                                           bpaddr);
 
      /* An adjusted breakpoint address can significantly alter
         a user's expectations.  Print a warning if an adjustment
	 is required.  */
      if (adjusted_bpaddr != bpaddr)
	breakpoint_adjustment_warning (bpaddr, adjusted_bpaddr, 0, 0);
 
      return adjusted_bpaddr;
    }
}
 
/* Allocate a struct bp_location.  */
 
static struct bp_location *
allocate_bp_location (struct breakpoint *bpt, enum bptype bp_type)
{
  struct bp_location *loc, *loc_p;
 
  loc = xmalloc (sizeof (struct bp_location));
  memset (loc, 0, sizeof (*loc));
 
  loc->owner = bpt;
  loc->cond = NULL;
  loc->shlib_disabled = 0;
  loc->enabled = 1;
 
  switch (bp_type)
    {
    case bp_breakpoint:
    case bp_until:
    case bp_finish:
    case bp_longjmp:
    case bp_longjmp_resume:
    case bp_step_resume:
    case bp_watchpoint_scope:
    case bp_call_dummy:
    case bp_shlib_event:
    case bp_thread_event:
    case bp_overlay_event:
    case bp_catch_load:
    case bp_catch_unload:
      loc->loc_type = bp_loc_software_breakpoint;
      break;
    case bp_hardware_breakpoint:
      loc->loc_type = bp_loc_hardware_breakpoint;
      break;
    case bp_hardware_watchpoint:
    case bp_read_watchpoint:
    case bp_access_watchpoint:
      loc->loc_type = bp_loc_hardware_watchpoint;
      break;
    case bp_watchpoint:
    case bp_catch_fork:
    case bp_catch_vfork:
    case bp_catch_exec:
      loc->loc_type = bp_loc_other;
      break;
    default:
      internal_error (__FILE__, __LINE__, _("unknown breakpoint type"));
    }
 
  /* Add this breakpoint to the end of the chain.  */
 
  loc_p = bp_location_chain;
  if (loc_p == 0)
    bp_location_chain = loc;
  else
    {
      while (loc_p->global_next)
	loc_p = loc_p->global_next;
      loc_p->global_next = loc;
    }
 
  return loc;
}
 
static void free_bp_location (struct bp_location *loc)
{
  if (loc->cond)
    xfree (loc->cond);
  xfree (loc);
}
 
/* Helper to set_raw_breakpoint below.  Creates a breakpoint
   that has type BPTYPE and has no locations as yet.  */
 
static struct breakpoint *
set_raw_breakpoint_without_location (enum bptype bptype)
{
  struct breakpoint *b, *b1;
 
  b = (struct breakpoint *) xmalloc (sizeof (struct breakpoint));
  memset (b, 0, sizeof (*b));
 
  b->type = bptype;
  b->language = current_language->la_language;
  b->input_radix = input_radix;
  b->thread = -1;
  b->enable_state = bp_enabled;
  b->next = 0;
  b->silent = 0;
  b->ignore_count = 0;
  b->commands = NULL;
  b->frame_id = null_frame_id;
  b->dll_pathname = NULL;
  b->triggered_dll_pathname = NULL;
  b->forked_inferior_pid = 0;
  b->exec_pathname = NULL;
  b->ops = NULL;
  b->condition_not_parsed = 0;
 
  /* Add this breakpoint to the end of the chain
     so that a list of breakpoints will come out in order
     of increasing numbers.  */
 
  b1 = breakpoint_chain;
  if (b1 == 0)
    breakpoint_chain = b;
  else
    {
      while (b1->next)
	b1 = b1->next;
      b1->next = b;
    }
  return b;
}
 
/* Initialize loc->function_name.  */
static void
set_breakpoint_location_function (struct bp_location *loc)
{
  if (loc->owner->type == bp_breakpoint
      || loc->owner->type == bp_hardware_breakpoint)
    {
      find_pc_partial_function (loc->address, &(loc->function_name), 
				NULL, NULL);
      if (loc->function_name)
	loc->function_name = xstrdup (loc->function_name);
    }
}
 
/* set_raw_breakpoint is a low level routine for allocating and
   partially initializing a breakpoint of type BPTYPE.  The newly
   created breakpoint's address, section, source file name, and line
   number are provided by SAL.  The newly created and partially
   initialized breakpoint is added to the breakpoint chain and
   is also returned as the value of this function.
 
   It is expected that the caller will complete the initialization of
   the newly created breakpoint struct as well as output any status
   information regarding the creation of a new breakpoint.  In
   particular, set_raw_breakpoint does NOT set the breakpoint
   number!  Care should be taken to not allow an error to occur
   prior to completing the initialization of the breakpoint.  If this
   should happen, a bogus breakpoint will be left on the chain.  */
 
struct breakpoint *
set_raw_breakpoint (struct symtab_and_line sal, enum bptype bptype)
{
  struct breakpoint *b = set_raw_breakpoint_without_location (bptype);
  CORE_ADDR adjusted_address;
 
  /* Adjust the breakpoint's address prior to allocating a location.
     Once we call allocate_bp_location(), that mostly uninitialized
     location will be placed on the location chain.  Adjustment of the
     breakpoint may cause read_memory_nobpt() to be called and we do
     not want its scan of the location chain to find a breakpoint and
     location that's only been partially initialized.  */
  adjusted_address = adjust_breakpoint_address (sal.pc, bptype);
 
  b->loc = allocate_bp_location (b, bptype);
  b->loc->requested_address = sal.pc;
  b->loc->address = adjusted_address;
 
  if (sal.symtab == NULL)
    b->source_file = NULL;
  else
    b->source_file = savestring (sal.symtab->filename,
				 strlen (sal.symtab->filename));
  b->loc->section = sal.section;
  b->line_number = sal.line;
 
  set_breakpoint_location_function (b->loc);
 
  check_duplicates (b);
  breakpoints_changed ();
 
  return b;
}
 
 
/* Note that the breakpoint object B describes a permanent breakpoint
   instruction, hard-wired into the inferior's code.  */
void
make_breakpoint_permanent (struct breakpoint *b)
{
  struct bp_location *bl;
  b->enable_state = bp_permanent;
 
  /* By definition, permanent breakpoints are already present in the code. 
     Mark all locations as inserted.  For now, make_breakpoint_permanent
     is called in just one place, so it's hard to say if it's reasonable
     to have permanent breakpoint with multiple locations or not,
     but it's easy to implmement.  */
  for (bl = b->loc; bl; bl = bl->next)
    bl->inserted = 1;
}
 
static struct breakpoint *
create_internal_breakpoint (CORE_ADDR address, enum bptype type)
{
  static int internal_breakpoint_number = -1;
  struct symtab_and_line sal;
  struct breakpoint *b;
 
  init_sal (&sal);		/* initialize to zeroes */
 
  sal.pc = address;
  sal.section = find_pc_overlay (sal.pc);
 
  b = set_raw_breakpoint (sal, type);
  b->number = internal_breakpoint_number--;
  b->disposition = disp_donttouch;
 
  return b;
}
 
 
static void
create_longjmp_breakpoint (char *func_name)
{
  struct breakpoint *b;
  struct minimal_symbol *m;
 
  if (func_name == NULL)
    b = create_internal_breakpoint (0, bp_longjmp_resume);
  else
    {
      if ((m = lookup_minimal_symbol_text (func_name, NULL)) == NULL)
	return;
 
      b = create_internal_breakpoint (SYMBOL_VALUE_ADDRESS (m), bp_longjmp);
    }
 
  b->enable_state = bp_disabled;
  b->silent = 1;
  if (func_name)
    b->addr_string = xstrdup (func_name);
}
 
/* Call this routine when stepping and nexting to enable a breakpoint
   if we do a longjmp().  When we hit that breakpoint, call
   set_longjmp_resume_breakpoint() to figure out where we are going. */
 
void
enable_longjmp_breakpoint (void)
{
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
    if (b->type == bp_longjmp)
    {
      b->enable_state = bp_enabled;
      check_duplicates (b);
    }
}
 
void
disable_longjmp_breakpoint (void)
{
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
    if (b->type == bp_longjmp
	|| b->type == bp_longjmp_resume)
    {
      b->enable_state = bp_disabled;
      check_duplicates (b);
    }
}
 
static void
create_overlay_event_breakpoint (char *func_name)
{
  struct breakpoint *b;
  struct minimal_symbol *m;
 
  if ((m = lookup_minimal_symbol_text (func_name, NULL)) == NULL)
    return;
 
  b = create_internal_breakpoint (SYMBOL_VALUE_ADDRESS (m), 
				  bp_overlay_event);
  b->addr_string = xstrdup (func_name);
 
  if (overlay_debugging == ovly_auto)
    {
      b->enable_state = bp_enabled;
      overlay_events_enabled = 1;
    }
  else 
    {
      b->enable_state = bp_disabled;
      overlay_events_enabled = 0;
    }
}
 
void
enable_overlay_breakpoints (void)
{
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
    if (b->type == bp_overlay_event)
    {
      b->enable_state = bp_enabled;
      check_duplicates (b);
      overlay_events_enabled = 1;
    }
}
 
void
disable_overlay_breakpoints (void)
{
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
    if (b->type == bp_overlay_event)
    {
      b->enable_state = bp_disabled;
      check_duplicates (b);
      overlay_events_enabled = 0;
    }
}
 
struct breakpoint *
create_thread_event_breakpoint (CORE_ADDR address)
{
  struct breakpoint *b;
 
  b = create_internal_breakpoint (address, bp_thread_event);
 
  b->enable_state = bp_enabled;
  /* addr_string has to be used or breakpoint_re_set will delete me.  */
  b->addr_string = xstrprintf ("*0x%s", paddr (b->loc->address));
 
  return b;
}
 
void
remove_thread_event_breakpoints (void)
{
  struct breakpoint *b, *temp;
 
  ALL_BREAKPOINTS_SAFE (b, temp)
    if (b->type == bp_thread_event)
      delete_breakpoint (b);
}
 
struct captured_parse_breakpoint_args
  {
    char **arg_p;
    struct symtabs_and_lines *sals_p;
    char ***addr_string_p;
    int *not_found_ptr;
  };
 
struct lang_and_radix
  {
    enum language lang;
    int radix;
  };
 
 
void
remove_solib_event_breakpoints (void)
{
  struct breakpoint *b, *temp;
 
  ALL_BREAKPOINTS_SAFE (b, temp)
    if (b->type == bp_shlib_event)
      delete_breakpoint (b);
}
 
struct breakpoint *
create_solib_event_breakpoint (CORE_ADDR address)
{
  struct breakpoint *b;
 
  b = create_internal_breakpoint (address, bp_shlib_event);
  return b;
}
 
/* Disable any breakpoints that are on code in shared libraries.  Only
   apply to enabled breakpoints, disabled ones can just stay disabled.  */
 
void
disable_breakpoints_in_shlibs (void)
{
  struct bp_location *loc;
  int disabled_shlib_breaks = 0;
 
  ALL_BP_LOCATIONS (loc)
  {
    struct breakpoint *b = loc->owner;
    /* We apply the check to all breakpoints, including disabled
       for those with loc->duplicate set.  This is so that when breakpoint
       becomes enabled, or the duplicate is removed, gdb will try to insert
       all breakpoints.  If we don't set shlib_disabled here, we'll try
       to insert those breakpoints and fail.  */
    if (((b->type == bp_breakpoint) || (b->type == bp_hardware_breakpoint))
	&& !loc->shlib_disabled
#ifdef PC_SOLIB
	&& PC_SOLIB (loc->address)
#else
	&& solib_address (loc->address)
#endif
	)
      {
	loc->shlib_disabled = 1;
      }
  }
}
 
/* Disable any breakpoints that are in in an unloaded shared library.  Only
   apply to enabled breakpoints, disabled ones can just stay disabled.  */
 
static void
disable_breakpoints_in_unloaded_shlib (struct so_list *solib)
{
  struct bp_location *loc;
  int disabled_shlib_breaks = 0;
 
  ALL_BP_LOCATIONS (loc)
  {
    struct breakpoint *b = loc->owner;
    if ((loc->loc_type == bp_loc_hardware_breakpoint
	 || loc->loc_type == bp_loc_software_breakpoint)
	&& !loc->shlib_disabled)
      {
#ifdef PC_SOLIB
	char *so_name = PC_SOLIB (loc->address);
#else
	char *so_name = solib_address (loc->address);
#endif
	if (so_name && !strcmp (so_name, solib->so_name))
          {
	    loc->shlib_disabled = 1;
	    /* At this point, we cannot rely on remove_breakpoint
	       succeeding so we must mark the breakpoint as not inserted
	       to prevent future errors occurring in remove_breakpoints.  */
	    loc->inserted = 0;
	    if (!disabled_shlib_breaks)
	      {
		target_terminal_ours_for_output ();
		warning (_("Temporarily disabling breakpoints for unloaded shared library \"%s\""),
			  so_name);
	      }
	    disabled_shlib_breaks = 1;
	  }
      }
  }
}
 
static void
create_fork_vfork_event_catchpoint (int tempflag, char *cond_string,
				    enum bptype bp_kind)
{
  struct symtab_and_line sal;
  struct breakpoint *b;
  int thread = -1;		/* All threads. */
 
  init_sal (&sal);
  sal.pc = 0;
  sal.symtab = NULL;
  sal.line = 0;
 
  b = set_raw_breakpoint (sal, bp_kind);
  set_breakpoint_count (breakpoint_count + 1);
  b->number = breakpoint_count;
  b->cond_string = (cond_string == NULL) ? 
    NULL : savestring (cond_string, strlen (cond_string));
  b->thread = thread;
  b->addr_string = NULL;
  b->enable_state = bp_enabled;
  b->disposition = tempflag ? disp_del : disp_donttouch;
  b->forked_inferior_pid = 0;
 
  mention (b);
}
 
static void
create_fork_event_catchpoint (int tempflag, char *cond_string)
{
  create_fork_vfork_event_catchpoint (tempflag, cond_string, bp_catch_fork);
}
 
static void
create_vfork_event_catchpoint (int tempflag, char *cond_string)
{
  create_fork_vfork_event_catchpoint (tempflag, cond_string, bp_catch_vfork);
}
 
static void
create_exec_event_catchpoint (int tempflag, char *cond_string)
{
  struct symtab_and_line sal;
  struct breakpoint *b;
  int thread = -1;		/* All threads. */
 
  init_sal (&sal);
  sal.pc = 0;
  sal.symtab = NULL;
  sal.line = 0;
 
  b = set_raw_breakpoint (sal, bp_catch_exec);
  set_breakpoint_count (breakpoint_count + 1);
  b->number = breakpoint_count;
  b->cond_string = (cond_string == NULL) ?
    NULL : savestring (cond_string, strlen (cond_string));
  b->thread = thread;
  b->addr_string = NULL;
  b->enable_state = bp_enabled;
  b->disposition = tempflag ? disp_del : disp_donttouch;
 
  mention (b);
}
 
static int
hw_breakpoint_used_count (void)
{
  struct breakpoint *b;
  int i = 0;
 
  ALL_BREAKPOINTS (b)
  {
    if (b->type == bp_hardware_breakpoint && b->enable_state == bp_enabled)
      i++;
  }
 
  return i;
}
 
static int
hw_watchpoint_used_count (enum bptype type, int *other_type_used)
{
  struct breakpoint *b;
  int i = 0;
 
  *other_type_used = 0;
  ALL_BREAKPOINTS (b)
  {
    if (breakpoint_enabled (b))
      {
	if (b->type == type)
	  i++;
	else if ((b->type == bp_hardware_watchpoint ||
		  b->type == bp_read_watchpoint ||
		  b->type == bp_access_watchpoint))
	  *other_type_used = 1;
      }
  }
  return i;
}
 
/* Call this after hitting the longjmp() breakpoint.  Use this to set
   a new breakpoint at the target of the jmp_buf.
 
   FIXME - This ought to be done by setting a temporary breakpoint
   that gets deleted automatically... */
 
void
set_longjmp_resume_breakpoint (CORE_ADDR pc, struct frame_id frame_id)
{
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
    if (b->type == bp_longjmp_resume)
    {
      b->loc->requested_address = pc;
      b->loc->address = adjust_breakpoint_address (b->loc->requested_address,
                                                   b->type);
      b->enable_state = bp_enabled;
      b->frame_id = frame_id;
      check_duplicates (b);
      return;
    }
}
 
void
disable_watchpoints_before_interactive_call_start (void)
{
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
  {
    if (((b->type == bp_watchpoint)
	 || (b->type == bp_hardware_watchpoint)
	 || (b->type == bp_read_watchpoint)
	 || (b->type == bp_access_watchpoint))
	&& breakpoint_enabled (b))
      {
	b->enable_state = bp_call_disabled;
	check_duplicates (b);
      }
  }
}
 
void
enable_watchpoints_after_interactive_call_stop (void)
{
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
  {
    if (((b->type == bp_watchpoint)
	 || (b->type == bp_hardware_watchpoint)
	 || (b->type == bp_read_watchpoint)
	 || (b->type == bp_access_watchpoint))
	&& (b->enable_state == bp_call_disabled))
      {
	b->enable_state = bp_enabled;
	check_duplicates (b);
      }
  }
}
 
 
/* Set a breakpoint that will evaporate an end of command
   at address specified by SAL.
   Restrict it to frame FRAME if FRAME is nonzero.  */
 
struct breakpoint *
set_momentary_breakpoint (struct symtab_and_line sal, struct frame_id frame_id,
			  enum bptype type)
{
  struct breakpoint *b;
  b = set_raw_breakpoint (sal, type);
  b->enable_state = bp_enabled;
  b->disposition = disp_donttouch;
  b->frame_id = frame_id;
 
  /* If we're debugging a multi-threaded program, then we
     want momentary breakpoints to be active in only a 
     single thread of control.  */
  if (in_thread_list (inferior_ptid))
    b->thread = pid_to_thread_id (inferior_ptid);
 
  return b;
}

 
/* Tell the user we have just set a breakpoint B.  */
 
static void
mention (struct breakpoint *b)
{
  int say_where = 0;
  struct cleanup *old_chain, *ui_out_chain;
  struct ui_stream *stb;
 
  stb = ui_out_stream_new (uiout);
  old_chain = make_cleanup_ui_out_stream_delete (stb);
 
  /* FIXME: This is misplaced; mention() is called by things (like
     hitting a watchpoint) other than breakpoint creation.  It should
     be possible to clean this up and at the same time replace the
     random calls to breakpoint_changed with this hook, as has already
     been done for deprecated_delete_breakpoint_hook and so on.  */
  if (deprecated_create_breakpoint_hook)
    deprecated_create_breakpoint_hook (b);
  breakpoint_create_event (b->number);
 
  if (b->ops != NULL && b->ops->print_mention != NULL)
    b->ops->print_mention (b);
  else
    switch (b->type)
      {
      case bp_none:
	printf_filtered (_("(apparently deleted?) Eventpoint %d: "), b->number);
	break;
      case bp_watchpoint:
	ui_out_text (uiout, "Watchpoint ");
	ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "wpt");
	ui_out_field_int (uiout, "number", b->number);
	ui_out_text (uiout, ": ");
	print_expression (b->exp, stb->stream);
	ui_out_field_stream (uiout, "exp", stb);
	do_cleanups (ui_out_chain);
	break;
      case bp_hardware_watchpoint:
	ui_out_text (uiout, "Hardware watchpoint ");
	ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "wpt");
	ui_out_field_int (uiout, "number", b->number);
	ui_out_text (uiout, ": ");
	print_expression (b->exp, stb->stream);
	ui_out_field_stream (uiout, "exp", stb);
	do_cleanups (ui_out_chain);
	break;
      case bp_read_watchpoint:
	ui_out_text (uiout, "Hardware read watchpoint ");
	ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "hw-rwpt");
	ui_out_field_int (uiout, "number", b->number);
	ui_out_text (uiout, ": ");
	print_expression (b->exp, stb->stream);
	ui_out_field_stream (uiout, "exp", stb);
	do_cleanups (ui_out_chain);
	break;
      case bp_access_watchpoint:
	ui_out_text (uiout, "Hardware access (read/write) watchpoint ");
	ui_out_chain = make_cleanup_ui_out_tuple_begin_end (uiout, "hw-awpt");
	ui_out_field_int (uiout, "number", b->number);
	ui_out_text (uiout, ": ");
	print_expression (b->exp, stb->stream);
	ui_out_field_stream (uiout, "exp", stb);
	do_cleanups (ui_out_chain);
	break;
      case bp_breakpoint:
	if (ui_out_is_mi_like_p (uiout))
	  {
	    say_where = 0;
	    break;
	  }
	printf_filtered (_("Breakpoint %d"), b->number);
	say_where = 1;
	break;
      case bp_hardware_breakpoint:
	if (ui_out_is_mi_like_p (uiout))
	  {
	    say_where = 0;
	    break;
	  }
	printf_filtered (_("Hardware assisted breakpoint %d"), b->number);
	say_where = 1;
	break;
      case bp_catch_load:
      case bp_catch_unload:
	printf_filtered (_("Catchpoint %d (%s %s)"),
			 b->number,
			 (b->type == bp_catch_load) ? "load" : "unload",
			 (b->dll_pathname != NULL) ? 
			 b->dll_pathname : "<any library>");
	break;
      case bp_catch_fork:
      case bp_catch_vfork:
	printf_filtered (_("Catchpoint %d (%s)"),
			 b->number,
			 (b->type == bp_catch_fork) ? "fork" : "vfork");
	break;
      case bp_catch_exec:
	printf_filtered (_("Catchpoint %d (exec)"),
			 b->number);
	break;
 
      case bp_until:
      case bp_finish:
      case bp_longjmp:
      case bp_longjmp_resume:
      case bp_step_resume:
      case bp_call_dummy:
      case bp_watchpoint_scope:
      case bp_shlib_event:
      case bp_thread_event:
      case bp_overlay_event:
	break;
      }
 
  if (say_where)
    {
      /* i18n: cagney/2005-02-11: Below needs to be merged into a
	 single string.  */
      if (b->loc == NULL)
	{
	  printf_filtered (_(" (%s) pending."), b->addr_string);
	}
      else
	{
	  if (addressprint || b->source_file == NULL)
	    {
	      printf_filtered (" at ");
	      fputs_filtered (paddress (b->loc->address), gdb_stdout);
	    }
	  if (b->source_file)
	    printf_filtered (": file %s, line %d.",
			     b->source_file, b->line_number);
 
	  if (b->loc->next)
	    {
	      struct bp_location *loc = b->loc;
	      int n = 0;
	      for (; loc; loc = loc->next)
		++n;
	      printf_filtered (" (%d locations)", n);		
	    }
 
	}
    }
  do_cleanups (old_chain);
  if (ui_out_is_mi_like_p (uiout))
    return;
  printf_filtered ("\n");
}

 
static struct bp_location *
add_location_to_breakpoint (struct breakpoint *b, enum bptype bptype,
			    const struct symtab_and_line *sal)
{
  struct bp_location *loc, **tmp;
 
  loc = allocate_bp_location (b, bptype);
  for (tmp = &(b->loc); *tmp != NULL; tmp = &((*tmp)->next))
    ;
  *tmp = loc;
  loc->requested_address = sal->pc;
  loc->address = adjust_breakpoint_address (loc->requested_address,
					    bptype);
  loc->section = sal->section;
 
  set_breakpoint_location_function (loc);
  return loc;
}
 
/* Create a breakpoint with SAL as location.  Use ADDR_STRING
   as textual description of the location, and COND_STRING
   as condition expression.  */
 
static void
create_breakpoint (struct symtabs_and_lines sals, char *addr_string,
		   char *cond_string,
		   enum bptype type, enum bpdisp disposition,
		   int thread, int ignore_count, int from_tty)
{
  struct breakpoint *b = NULL;
  int i;
 
  if (type == bp_hardware_breakpoint)
    {
      int i = hw_breakpoint_used_count ();
      int target_resources_ok = 
	TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_hardware_breakpoint, 
					    i + 1, 0);
      if (target_resources_ok == 0)
	error (_("No hardware breakpoint support in the target."));
      else if (target_resources_ok < 0)
	error (_("Hardware breakpoints used exceeds limit."));
    }
 
  for (i = 0; i < sals.nelts; ++i)
    {
      struct symtab_and_line sal = sals.sals[i];
      struct bp_location *loc;
 
      if (from_tty)
	describe_other_breakpoints (sal.pc, sal.section, thread);
 
      if (i == 0)
	{
	  b = set_raw_breakpoint (sal, type);
	  set_breakpoint_count (breakpoint_count + 1);
	  b->number = breakpoint_count;
	  b->thread = thread;
 
	  b->cond_string = cond_string;
	  b->ignore_count = ignore_count;
	  b->enable_state = bp_enabled;
	  b->disposition = disposition;
 
	  loc = b->loc;
	}
      else
	{
	  loc = add_location_to_breakpoint (b, type, &sal);
	}
 
      if (b->cond_string)
	{
	  char *arg = b->cond_string;
	  loc->cond = parse_exp_1 (&arg, block_for_pc (loc->address), 0);
	  if (*arg)
              error (_("Garbage %s follows condition"), arg);
	}
    }   
 
  if (addr_string)
    b->addr_string = addr_string;
  else
    /* addr_string has to be used or breakpoint_re_set will delete
       me.  */
    b->addr_string = xstrprintf ("*0x%s", paddr (b->loc->address));
 
  mention (b);
}
 
/* Remove element at INDEX_TO_REMOVE from SAL, shifting other
   elements to fill the void space.  */
static void remove_sal (struct symtabs_and_lines *sal, int index_to_remove)
{
  int i = index_to_remove+1;
  int last_index = sal->nelts-1;
 
  for (;i <= last_index; ++i)
    sal->sals[i-1] = sal->sals[i];
 
  --(sal->nelts);
}
 
/* If appropriate, obtains all sals that correspond
   to the same file and line as SAL.  This is done
   only if SAL does not have explicit PC and has
   line and file information.  If we got just a single
   expanded sal, return the original.
 
   Otherwise, if SAL.explicit_line is not set, filter out 
   all sals for which the name of enclosing function 
   is different from SAL. This makes sure that if we have
   breakpoint originally set in template instantiation, say
   foo<int>(), we won't expand SAL to locations at the same
   line in all existing instantiations of 'foo'.
 
*/
struct symtabs_and_lines
expand_line_sal_maybe (struct symtab_and_line sal)
{
  struct symtabs_and_lines expanded;
  CORE_ADDR original_pc = sal.pc;
  char *original_function = NULL;
  int found;
  int i;
 
  /* If we have explicit pc, don't expand.
     If we have no line number, we can't expand.  */
  if (sal.explicit_pc || sal.line == 0 || sal.symtab == NULL)
    {
      expanded.nelts = 1;
      expanded.sals = xmalloc (sizeof (struct symtab_and_line));
      expanded.sals[0] = sal;
      return expanded;
    }
 
  sal.pc = 0;
  find_pc_partial_function (original_pc, &original_function, NULL, NULL);
 
  expanded = expand_line_sal (sal);
  if (expanded.nelts == 1)
    {
      /* We had one sal, we got one sal.  Without futher
	 processing, just return the original sal.  */
      xfree (expanded.sals);
      expanded.nelts = 1;
      expanded.sals = xmalloc (sizeof (struct symtab_and_line));
      sal.pc = original_pc;
      expanded.sals[0] = sal;
      return expanded;      
    }
 
  if (!sal.explicit_line)
    {
      CORE_ADDR func_addr, func_end;
      for (i = 0; i < expanded.nelts; ++i)
	{
	  CORE_ADDR pc = expanded.sals[i].pc;
	  char *this_function;
	  if (find_pc_partial_function (pc, &this_function, 
					&func_addr, &func_end))
	    {
	      if (this_function && 
		  strcmp (this_function, original_function) != 0)
		{
		  remove_sal (&expanded, i);
		  --i;
		}
	      else if (func_addr == pc)	    
		{	     
		  /* We're at beginning of a function, and should
		     skip prologue.  */
		  struct symbol *sym = find_pc_function (pc);
		  if (sym)
		    expanded.sals[i] = find_function_start_sal (sym, 1);
		  else
		    expanded.sals[i].pc 
		      = gdbarch_skip_prologue (current_gdbarch, pc);
		}
	    }
	}
    }
 
 
  if (expanded.nelts <= 1)
    {
      /* This is un ugly workaround. If we get zero
       expanded sals then something is really wrong.
      Fix that by returnign the original sal. */
      xfree (expanded.sals);
      expanded.nelts = 1;
      expanded.sals = xmalloc (sizeof (struct symtab_and_line));
      sal.pc = original_pc;
      expanded.sals[0] = sal;
      return expanded;      
    }
 
  if (original_pc)
    {
      found = 0;
      for (i = 0; i < expanded.nelts; ++i)
	if (expanded.sals[i].pc == original_pc)
	  {
	    found = 1;
	    break;
	  }
      gdb_assert (found);
    }
 
  return expanded;
}
 
/* Add SALS.nelts breakpoints to the breakpoint table.  For each
   SALS.sal[i] breakpoint, include the corresponding ADDR_STRING[i]
   value.  COND_STRING, if not NULL, specified the condition to be
   used for all breakpoints.  Essentially the only case where
   SALS.nelts is not 1 is when we set a breakpoint on an overloaded
   function.  In that case, it's still not possible to specify
   separate conditions for different overloaded functions, so
   we take just a single condition string.
 
   NOTE: If the function succeeds, the caller is expected to cleanup
   the arrays ADDR_STRING, COND_STRING, and SALS (but not the
   array contents).  If the function fails (error() is called), the
   caller is expected to cleanups both the ADDR_STRING, COND_STRING,
   COND and SALS arrays and each of those arrays contents. */
 
static void
create_breakpoints (struct symtabs_and_lines sals, char **addr_string,
		    char *cond_string,
		    enum bptype type, enum bpdisp disposition,
		    int thread, int ignore_count, int from_tty)
{
  int i;
  for (i = 0; i < sals.nelts; ++i)
    {
      struct symtabs_and_lines expanded = 
	expand_line_sal_maybe (sals.sals[i]);
 
      create_breakpoint (expanded, addr_string[i],
			 cond_string, type, disposition,
			 thread, ignore_count, from_tty);
    }
}
 
/* Parse ARG which is assumed to be a SAL specification possibly
   followed by conditionals.  On return, SALS contains an array of SAL
   addresses found. ADDR_STRING contains a vector of (canonical)
   address strings. ARG points to the end of the SAL. */
 
static void
parse_breakpoint_sals (char **address,
		       struct symtabs_and_lines *sals,
		       char ***addr_string,
		       int *not_found_ptr)
{
  char *addr_start = *address;
  *addr_string = NULL;
  /* If no arg given, or if first arg is 'if ', use the default
     breakpoint. */
  if ((*address) == NULL
      || (strncmp ((*address), "if", 2) == 0 && isspace ((*address)[2])))
    {
      if (default_breakpoint_valid)
	{
	  struct symtab_and_line sal;
	  init_sal (&sal);		/* initialize to zeroes */
	  sals->sals = (struct symtab_and_line *)
	    xmalloc (sizeof (struct symtab_and_line));
	  sal.pc = default_breakpoint_address;
	  sal.line = default_breakpoint_line;
	  sal.symtab = default_breakpoint_symtab;
	  sal.section = find_pc_overlay (sal.pc);
	  sals->sals[0] = sal;
	  sals->nelts = 1;
	}
      else
	error (_("No default breakpoint address now."));
    }
  else
    {
      /* Force almost all breakpoints to be in terms of the
         current_source_symtab (which is decode_line_1's default).  This
         should produce the results we want almost all of the time while
         leaving default_breakpoint_* alone.  
         ObjC: However, don't match an Objective-C method name which
         may have a '+' or '-' succeeded by a '[' */
 
      struct symtab_and_line cursal = get_current_source_symtab_and_line ();
 
      if (default_breakpoint_valid
	  && (!cursal.symtab
 	      || ((strchr ("+-", (*address)[0]) != NULL)
 		  && ((*address)[1] != '['))))
	*sals = decode_line_1 (address, 1, default_breakpoint_symtab,
			       default_breakpoint_line, addr_string, 
			       not_found_ptr);
      else
	*sals = decode_line_1 (address, 1, (struct symtab *) NULL, 0,
		               addr_string, not_found_ptr);
    }
  /* For any SAL that didn't have a canonical string, fill one in. */
  if (sals->nelts > 0 && *addr_string == NULL)
    *addr_string = xcalloc (sals->nelts, sizeof (char **));
  if (addr_start != (*address))
    {
      int i;
      for (i = 0; i < sals->nelts; i++)
	{
	  /* Add the string if not present. */
	  if ((*addr_string)[i] == NULL)
	    (*addr_string)[i] = savestring (addr_start, (*address) - addr_start);
	}
    }
}
 
 
/* Convert each SAL into a real PC.  Verify that the PC can be
   inserted as a breakpoint.  If it can't throw an error. */
 
static void
breakpoint_sals_to_pc (struct symtabs_and_lines *sals,
		       char *address)
{    
  int i;
  for (i = 0; i < sals->nelts; i++)
    resolve_sal_pc (&sals->sals[i]);
}
 
static void
do_captured_parse_breakpoint (struct ui_out *ui, void *data)
{
  struct captured_parse_breakpoint_args *args = data;
 
  parse_breakpoint_sals (args->arg_p, args->sals_p, args->addr_string_p, 
		         args->not_found_ptr);
}
 
/* Given TOK, a string specification of condition and thread, as
   accepted by the 'break' command, extract the condition
   string and thread number and set *COND_STRING and *THREAD.
   PC identifies the context at which the condition should be parsed.  
   If no condition is found, *COND_STRING is set to NULL.
   If no thread is found, *THREAD is set to -1.  */
static void 
find_condition_and_thread (char *tok, CORE_ADDR pc, 
			   char **cond_string, int *thread)
{
  *cond_string = NULL;
  *thread = -1;
  while (tok && *tok)
    {
      char *end_tok;
      int toklen;
      char *cond_start = NULL;
      char *cond_end = NULL;
      while (*tok == ' ' || *tok == '\t')
	tok++;
 
      end_tok = tok;
 
      while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
	end_tok++;
 
      toklen = end_tok - tok;
 
      if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
	{
	  tok = cond_start = end_tok + 1;
	  parse_exp_1 (&tok, block_for_pc (pc), 0);
	  cond_end = tok;
	  *cond_string = savestring (cond_start, 
				     cond_end - cond_start);
	}
      else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
	{
	  char *tmptok;
 
	  tok = end_tok + 1;
	  tmptok = tok;
	  *thread = strtol (tok, &tok, 0);
	  if (tok == tmptok)
	    error (_("Junk after thread keyword."));
	  if (!valid_thread_id (*thread))
	    error (_("Unknown thread %d."), *thread);
	}
      else
	error (_("Junk at end of arguments."));
    }
}
 
/* Set a breakpoint.  This function is shared between
   CLI and MI functions for setting a breakpoint.
   This function has two major modes of operations,
   selected by the PARSE_CONDITION_AND_THREAD parameter.
   If non-zero, the function will parse arg, extracting
   breakpoint location, address and thread. Otherwise,
   ARG is just the location of breakpoint, with condition
   and thread specified by the COND_STRING and THREAD
   parameters.  */
 
static void
break_command_really (char *arg, char *cond_string, int thread,
		      int parse_condition_and_thread,
		      int tempflag, int hardwareflag, 
		      int ignore_count,
		      enum auto_boolean pending_break_support,
		      int from_tty)
{
  struct gdb_exception e;
  struct symtabs_and_lines sals;
  struct symtab_and_line pending_sal;
  char *copy_arg;
  char *err_msg;
  char *addr_start = arg;
  char **addr_string;
  struct cleanup *old_chain;
  struct cleanup *breakpoint_chain = NULL;
  struct captured_parse_breakpoint_args parse_args;
  int i;
  int pending = 0;
  int not_found = 0;
 
  sals.sals = NULL;
  sals.nelts = 0;
  addr_string = NULL;
 
  parse_args.arg_p = &arg;
  parse_args.sals_p = &sals;
  parse_args.addr_string_p = &addr_string;
  parse_args.not_found_ptr = &not_found;
 
  e = catch_exception (uiout, do_captured_parse_breakpoint, 
		       &parse_args, RETURN_MASK_ALL);
 
  /* If caller is interested in rc value from parse, set value.  */
  switch (e.reason)
    {
    case RETURN_QUIT:
      throw_exception (e);
    case RETURN_ERROR:
      switch (e.error)
	{
	case NOT_FOUND_ERROR:
 
	  /* If pending breakpoint support is turned off, throw
	     error.  */
 
	  if (pending_break_support == AUTO_BOOLEAN_FALSE)
	    throw_exception (e);
 
	  exception_print (gdb_stderr, e);
 
          /* If pending breakpoint support is auto query and the user
	     selects no, then simply return the error code.  */
	  if (pending_break_support == AUTO_BOOLEAN_AUTO && 
	      !nquery ("Make breakpoint pending on future shared library load? "))
	    return;
 
	  /* At this point, either the user was queried about setting
	     a pending breakpoint and selected yes, or pending
	     breakpoint behavior is on and thus a pending breakpoint
	     is defaulted on behalf of the user.  */
	  copy_arg = xstrdup (addr_start);
	  addr_string = &copy_arg;
	  sals.nelts = 1;
	  sals.sals = &pending_sal;
	  pending_sal.pc = 0;
	  pending = 1;
	  break;
	default:
	  throw_exception (e);
	}
    default:
      if (!sals.nelts)
	return;
    }
 
  /* Create a chain of things that always need to be cleaned up. */
  old_chain = make_cleanup (null_cleanup, 0);
 
  if (!pending)
    {
      /* Make sure that all storage allocated to SALS gets freed.  */
      make_cleanup (xfree, sals.sals);
 
      /* Cleanup the addr_string array but not its contents. */
      make_cleanup (xfree, addr_string);
    }
 
  /* ----------------------------- SNIP -----------------------------
     Anything added to the cleanup chain beyond this point is assumed
     to be part of a breakpoint.  If the breakpoint create succeeds
     then the memory is not reclaimed. */
  breakpoint_chain = make_cleanup (null_cleanup, 0);
 
  /* Mark the contents of the addr_string for cleanup.  These go on
     the breakpoint_chain and only occure if the breakpoint create
     fails. */
  for (i = 0; i < sals.nelts; i++)
    {
      if (addr_string[i] != NULL)
	make_cleanup (xfree, addr_string[i]);
    }
 
  /* Resolve all line numbers to PC's and verify that the addresses
     are ok for the target.  */
  if (!pending)
    breakpoint_sals_to_pc (&sals, addr_start);
 
  /* Verify that condition can be parsed, before setting any
     breakpoints.  Allocate a separate condition expression for each
     breakpoint. */
  if (!pending)
    {
        if (parse_condition_and_thread)
        {
            /* Here we only parse 'arg' to separate condition
               from thread number, so parsing in context of first
               sal is OK.  When setting the breakpoint we'll 
               re-parse it in context of each sal.  */
            cond_string = NULL;
            thread = -1;
            find_condition_and_thread (arg, sals.sals[0].pc, &cond_string, &thread);
            if (cond_string)
                make_cleanup (xfree, cond_string);
        }
        else
        {
            /* Create a private copy of condition string.  */
            if (cond_string)
            {
                cond_string = xstrdup (cond_string);
                make_cleanup (xfree, cond_string);
            }
        }
      create_breakpoints (sals, addr_string, cond_string,
			  hardwareflag ? bp_hardware_breakpoint 
			  : bp_breakpoint,
			  tempflag ? disp_del : disp_donttouch,
			  thread, ignore_count, from_tty);
    }
  else
    {
      struct symtab_and_line sal = {0};
      struct breakpoint *b;
 
      make_cleanup (xfree, copy_arg);
 
      b = set_raw_breakpoint_without_location (hardwareflag 
					       ? bp_hardware_breakpoint 
					       : bp_breakpoint);
      set_breakpoint_count (breakpoint_count + 1);
      b->number = breakpoint_count;
      b->thread = -1;
      b->addr_string = addr_string[0];
      b->cond_string = NULL;
      b->ignore_count = ignore_count;
      b->disposition = tempflag ? disp_del : disp_donttouch;
      b->condition_not_parsed = 1;
      mention (b);
    }
 
  if (sals.nelts > 1)
    warning (_("Multiple breakpoints were set.\n"
	       "Use the \"delete\" command to delete unwanted breakpoints."));
  /* That's it. Discard the cleanups for data inserted into the
     breakpoint. */
  discard_cleanups (breakpoint_chain);
  /* But cleanup everything else. */
  do_cleanups (old_chain);
}
 
/* Set a breakpoint. 
   ARG is a string describing breakpoint address,
   condition, and thread.
   FLAG specifies if a breakpoint is hardware on,
   and if breakpoint is temporary, using BP_HARDWARE_FLAG
   and BP_TEMPFLAG.  */
 
static void
break_command_1 (char *arg, int flag, int from_tty)
{
  int hardwareflag = flag & BP_HARDWAREFLAG;
  int tempflag = flag & BP_TEMPFLAG;
 
  break_command_really (arg, 
			NULL, 0, 1 /* parse arg */,
			tempflag, hardwareflag,
			0 /* Ignore count */,
			pending_break_support, from_tty);
}
 
 
void
set_breakpoint (char *address, char *condition,
		int hardwareflag, int tempflag,
		int thread, int ignore_count,
		int pending)
{
  break_command_really (address, condition, thread,
			0 /* condition and thread are valid.  */,
			tempflag, hardwareflag,
			ignore_count,
			pending 
			? AUTO_BOOLEAN_TRUE : AUTO_BOOLEAN_FALSE,
			0);
}
 
 
/* Helper function for break_command_1 and disassemble_command.  */
 
void
resolve_sal_pc (struct symtab_and_line *sal)
{
  CORE_ADDR pc;
 
  if (sal->pc == 0 && sal->symtab != NULL)
    {
      if (!find_line_pc (sal->symtab, sal->line, &pc))
	error (_("No line %d in file \"%s\"."),
	       sal->line, sal->symtab->filename);
      sal->pc = pc;
    }
 
  if (sal->section == 0 && sal->symtab != NULL)
    {
      struct blockvector *bv;
      struct block *b;
      struct symbol *sym;
 
      bv = blockvector_for_pc_sect (sal->pc, 0, &b, sal->symtab);
      if (bv != NULL)
	{
	  sym = block_function (b);
	  if (sym != NULL)
	    {
	      fixup_symbol_section (sym, sal->symtab->objfile);
	      sal->section = SYMBOL_BFD_SECTION (sym);
	    }
	  else
	    {
	      /* It really is worthwhile to have the section, so we'll just
	         have to look harder. This case can be executed if we have 
	         line numbers but no functions (as can happen in assembly 
	         source).  */
 
	      struct minimal_symbol *msym;
 
	      msym = lookup_minimal_symbol_by_pc (sal->pc);
	      if (msym)
		sal->section = SYMBOL_BFD_SECTION (msym);
	    }
	}
    }
}
 
void
break_command (char *arg, int from_tty)
{
  break_command_1 (arg, 0, from_tty);
}
 
void
tbreak_command (char *arg, int from_tty)
{
  break_command_1 (arg, BP_TEMPFLAG, from_tty);
}
 
static void
hbreak_command (char *arg, int from_tty)
{
  break_command_1 (arg, BP_HARDWAREFLAG, from_tty);
}
 
static void
thbreak_command (char *arg, int from_tty)
{
  break_command_1 (arg, (BP_TEMPFLAG | BP_HARDWAREFLAG), from_tty);
}
 
static void
stop_command (char *arg, int from_tty)
{
  printf_filtered (_("Specify the type of breakpoint to set.\n\
Usage: stop in <function | address>\n\
       stop at <line>\n"));
}
 
static void
stopin_command (char *arg, int from_tty)
{
  int badInput = 0;
 
  if (arg == (char *) NULL)
    badInput = 1;
  else if (*arg != '*')
    {
      char *argptr = arg;
      int hasColon = 0;
 
      /* look for a ':'.  If this is a line number specification, then
         say it is bad, otherwise, it should be an address or
         function/method name */
      while (*argptr && !hasColon)
	{
	  hasColon = (*argptr == ':');
	  argptr++;
	}
 
      if (hasColon)
	badInput = (*argptr != ':');	/* Not a class::method */
      else
	badInput = isdigit (*arg);	/* a simple line number */
    }
 
  if (badInput)
    printf_filtered (_("Usage: stop in <function | address>\n"));
  else
    break_command_1 (arg, 0, from_tty);
}
 
static void
stopat_command (char *arg, int from_tty)
{
  int badInput = 0;
 
  if (arg == (char *) NULL || *arg == '*')	/* no line number */
    badInput = 1;
  else
    {
      char *argptr = arg;
      int hasColon = 0;
 
      /* look for a ':'.  If there is a '::' then get out, otherwise
         it is probably a line number. */
      while (*argptr && !hasColon)
	{
	  hasColon = (*argptr == ':');
	  argptr++;
	}
 
      if (hasColon)
	badInput = (*argptr == ':');	/* we have class::method */
      else
	badInput = !isdigit (*arg);	/* not a line number */
    }
 
  if (badInput)
    printf_filtered (_("Usage: stop at <line>\n"));
  else
    break_command_1 (arg, 0, from_tty);
}
 
/* accessflag:  hw_write:  watch write, 
                hw_read:   watch read, 
		hw_access: watch access (read or write) */
static void
watch_command_1 (char *arg, int accessflag, int from_tty)
{
  struct breakpoint *b, *scope_breakpoint = NULL;
  struct symtab_and_line sal;
  struct expression *exp;
  struct block *exp_valid_block;
  struct value *val, *mark;
  struct frame_info *frame;
  struct frame_info *prev_frame = NULL;
  char *exp_start = NULL;
  char *exp_end = NULL;
  char *tok, *id_tok_start, *end_tok;
  int toklen;
  char *cond_start = NULL;
  char *cond_end = NULL;
  struct expression *cond = NULL;
  int i, other_type_used, target_resources_ok = 0;
  enum bptype bp_type;
  int mem_cnt = 0;
  int thread = -1;
 
  init_sal (&sal);		/* initialize to zeroes */
 
  /* Make sure that we actually have parameters to parse.  */
  if (arg != NULL && arg[0] != '\0')
    {
      toklen = strlen (arg); /* Size of argument list.  */
 
      /* Points tok to the end of the argument list.  */
      tok = arg + toklen - 1;
 
      /* Go backwards in the parameters list. Skip the last parameter.
         If we're expecting a 'thread <thread_num>' parameter, this should
         be the thread identifier.  */
      while (tok > arg && (*tok == ' ' || *tok == '\t'))
        tok--;
      while (tok > arg && (*tok != ' ' && *tok != '\t'))
        tok--;
 
      /* Points end_tok to the beginning of the last token.  */
      id_tok_start = tok + 1;
 
      /* Go backwards in the parameters list. Skip one more parameter.
         If we're expecting a 'thread <thread_num>' parameter, we should
         reach a "thread" token.  */
      while (tok > arg && (*tok == ' ' || *tok == '\t'))
        tok--;
 
      end_tok = tok;
 
      while (tok > arg && (*tok != ' ' && *tok != '\t'))
        tok--;
 
      /* Move the pointer forward to skip the whitespace and
         calculate the length of the token.  */
      tok++;
      toklen = end_tok - tok;
 
      if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
        {
          /* At this point we've found a "thread" token, which means
             the user is trying to set a watchpoint that triggers
             only in a specific thread.  */
          char *endp;
 
          /* Extract the thread ID from the next token.  */
          thread = strtol (id_tok_start, &endp, 0);
 
          /* Check if the user provided a valid numeric value for the
             thread ID.  */
          if (*endp != ' ' && *endp != '\t' && *endp != '\0')
            error (_("Invalid thread ID specification %s."), id_tok_start);
 
          /* Check if the thread actually exists.  */
          if (!valid_thread_id (thread))
            error (_("Unknown thread %d."), thread);
 
          /* Truncate the string and get rid of the thread <thread_num>
             parameter before the parameter list is parsed by the
             evaluate_expression() function.  */
          *tok = '\0';
        }
    }
 
  /* Parse the rest of the arguments.  */
  innermost_block = NULL;
  exp_start = arg;
  exp = parse_exp_1 (&arg, 0, 0);
  exp_end = arg;
  exp_valid_block = innermost_block;
  mark = value_mark ();
  val = evaluate_expression (exp);
  release_value (val);
  if (value_lazy (val))
    value_fetch_lazy (val);
 
  tok = arg;
  while (*tok == ' ' || *tok == '\t')
    tok++;
  end_tok = tok;
 
  while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
    end_tok++;
 
  toklen = end_tok - tok;
  if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
    {
      tok = cond_start = end_tok + 1;
      cond = parse_exp_1 (&tok, 0, 0);
      cond_end = tok;
    }
  if (*tok)
    error (_("Junk at end of command."));
 
  if (accessflag == hw_read)
    bp_type = bp_read_watchpoint;
  else if (accessflag == hw_access)
    bp_type = bp_access_watchpoint;
  else
    bp_type = bp_hardware_watchpoint;
 
  mem_cnt = can_use_hardware_watchpoint (val);
  if (mem_cnt == 0 && bp_type != bp_hardware_watchpoint)
    error (_("Expression cannot be implemented with read/access watchpoint."));
  if (mem_cnt != 0)
    {
      i = hw_watchpoint_used_count (bp_type, &other_type_used);
      target_resources_ok = 
	TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_type, i + mem_cnt, 
					    other_type_used);
      if (target_resources_ok == 0 && bp_type != bp_hardware_watchpoint)
	error (_("Target does not support this type of hardware watchpoint."));
 
      if (target_resources_ok < 0 && bp_type != bp_hardware_watchpoint)
	error (_("Target can only support one kind of HW watchpoint at a time."));
    }
 
  /* Change the type of breakpoint to an ordinary watchpoint if a hardware
     watchpoint could not be set.  */
  if (!mem_cnt || target_resources_ok <= 0)
    bp_type = bp_watchpoint;
 
  frame = block_innermost_frame (exp_valid_block);
  if (frame)
    prev_frame = get_prev_frame (frame);
  else
    prev_frame = NULL;
 
  /* If the expression is "local", then set up a "watchpoint scope"
     breakpoint at the point where we've left the scope of the watchpoint
     expression.  Create the scope breakpoint before the watchpoint, so
     that we will encounter it first in bpstat_stop_status.  */
  if (innermost_block && prev_frame)
    {
      scope_breakpoint = create_internal_breakpoint (get_frame_pc (prev_frame),
						     bp_watchpoint_scope);
 
      scope_breakpoint->enable_state = bp_enabled;
 
      /* Automatically delete the breakpoint when it hits.  */
      scope_breakpoint->disposition = disp_del;
 
      /* Only break in the proper frame (help with recursion).  */
      scope_breakpoint->frame_id = get_frame_id (prev_frame);
 
      /* Set the address at which we will stop.  */
      scope_breakpoint->loc->requested_address
	= get_frame_pc (prev_frame);
      scope_breakpoint->loc->address
	= adjust_breakpoint_address (scope_breakpoint->loc->requested_address,
				     scope_breakpoint->type);
    }
 
  /* Now set up the breakpoint.  */
  b = set_raw_breakpoint (sal, bp_type);
  set_breakpoint_count (breakpoint_count + 1);
  b->number = breakpoint_count;
  b->thread = thread;
  b->disposition = disp_donttouch;
  b->exp = exp;
  b->exp_valid_block = exp_valid_block;
  b->exp_string = savestring (exp_start, exp_end - exp_start);
  b->val = val;
  b->loc->cond = cond;
  if (cond_start)
    b->cond_string = savestring (cond_start, cond_end - cond_start);
  else
    b->cond_string = 0;
 
  if (frame)
    b->watchpoint_frame = get_frame_id (frame);
  else
    b->watchpoint_frame = null_frame_id;
 
  if (scope_breakpoint != NULL)
    {
      /* The scope breakpoint is related to the watchpoint.  We will
	 need to act on them together.  */
      b->related_breakpoint = scope_breakpoint;
      scope_breakpoint->related_breakpoint = b;
    }
 
  value_free_to_mark (mark);
  mention (b);
}
 
/* Return count of locations need to be watched and can be handled
   in hardware.  If the watchpoint can not be handled
   in hardware return zero.  */
 
static int
can_use_hardware_watchpoint (struct value *v)
{
  int found_memory_cnt = 0;
  struct value *head = v;
 
  /* Did the user specifically forbid us to use hardware watchpoints? */
  if (!can_use_hw_watchpoints)
    return 0;
 
  /* Make sure that the value of the expression depends only upon
     memory contents, and values computed from them within GDB.  If we
     find any register references or function calls, we can't use a
     hardware watchpoint.
 
     The idea here is that evaluating an expression generates a series
     of values, one holding the value of every subexpression.  (The
     expression a*b+c has five subexpressions: a, b, a*b, c, and
     a*b+c.)  GDB's values hold almost enough information to establish
     the criteria given above --- they identify memory lvalues,
     register lvalues, computed values, etcetera.  So we can evaluate
     the expression, and then scan the chain of values that leaves
     behind to decide whether we can detect any possible change to the
     expression's final value using only hardware watchpoints.
 
     However, I don't think that the values returned by inferior
     function calls are special in any way.  So this function may not
     notice that an expression involving an inferior function call
     can't be watched with hardware watchpoints.  FIXME.  */
  for (; v; v = value_next (v))
    {
      if (VALUE_LVAL (v) == lval_memory)
	{
	  if (value_lazy (v))
	    /* A lazy memory lvalue is one that GDB never needed to fetch;
	       we either just used its address (e.g., `a' in `a.b') or
	       we never needed it at all (e.g., `a' in `a,b').  */
	    ;
	  else
	    {
	      /* Ahh, memory we actually used!  Check if we can cover
                 it with hardware watchpoints.  */
	      struct type *vtype = check_typedef (value_type (v));
 
	      /* We only watch structs and arrays if user asked for it
		 explicitly, never if they just happen to appear in a
		 middle of some value chain.  */
	      if (v == head
		  || (TYPE_CODE (vtype) != TYPE_CODE_STRUCT
		      && TYPE_CODE (vtype) != TYPE_CODE_ARRAY))
		{
		  CORE_ADDR vaddr = VALUE_ADDRESS (v) + value_offset (v);
		  int       len   = TYPE_LENGTH (value_type (v));
 
		  if (!TARGET_REGION_OK_FOR_HW_WATCHPOINT (vaddr, len))
		    return 0;
		  else
		    found_memory_cnt++;
		}
	    }
	}
      else if (VALUE_LVAL (v) != not_lval
	       && deprecated_value_modifiable (v) == 0)
	return 0;	/* ??? What does this represent? */
      else if (VALUE_LVAL (v) == lval_register)
	return 0;	/* cannot watch a register with a HW watchpoint */
    }
 
  /* The expression itself looks suitable for using a hardware
     watchpoint, but give the target machine a chance to reject it.  */
  return found_memory_cnt;
}
 
void
watch_command_wrapper (char *arg, int from_tty)
{
  watch_command (arg, from_tty);
}
 
static void
watch_command (char *arg, int from_tty)
{
  watch_command_1 (arg, hw_write, from_tty);
}
 
void
rwatch_command_wrapper (char *arg, int from_tty)
{
  rwatch_command (arg, from_tty);
}
 
static void
rwatch_command (char *arg, int from_tty)
{
  watch_command_1 (arg, hw_read, from_tty);
}
 
void
awatch_command_wrapper (char *arg, int from_tty)
{
  awatch_command (arg, from_tty);
}
 
static void
awatch_command (char *arg, int from_tty)
{
  watch_command_1 (arg, hw_access, from_tty);
}

 
/* Helper routines for the until_command routine in infcmd.c.  Here
   because it uses the mechanisms of breakpoints.  */
 
/* This function is called by fetch_inferior_event via the
   cmd_continuation pointer, to complete the until command. It takes
   care of cleaning up the temporary breakpoints set up by the until
   command. */
static void
until_break_command_continuation (struct continuation_arg *arg)
{
  struct cleanup *cleanups;
 
  cleanups = (struct cleanup *) arg->data.pointer;
  do_exec_cleanups (cleanups);
}
 
void
until_break_command (char *arg, int from_tty, int anywhere)
{
  struct symtabs_and_lines sals;
  struct symtab_and_line sal;
  struct frame_info *frame = get_selected_frame (NULL);
  struct frame_info *prev_frame = get_prev_frame (frame);
  struct breakpoint *breakpoint;
  struct cleanup *old_chain;
  struct continuation_arg *arg1;
 
 
  clear_proceed_status ();
 
  /* Set a breakpoint where the user wants it and at return from
     this function */
 
  if (default_breakpoint_valid)
    sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
			  default_breakpoint_line, (char ***) NULL, NULL);
  else
    sals = decode_line_1 (&arg, 1, (struct symtab *) NULL, 
			  0, (char ***) NULL, NULL);
 
  if (sals.nelts != 1)
    error (_("Couldn't get information on specified line."));
 
  sal = sals.sals[0];
  xfree (sals.sals);	/* malloc'd, so freed */
 
  if (*arg)
    error (_("Junk at end of arguments."));
 
  resolve_sal_pc (&sal);
 
  if (anywhere)
    /* If the user told us to continue until a specified location,
       we don't specify a frame at which we need to stop.  */
    breakpoint = set_momentary_breakpoint (sal, null_frame_id, bp_until);
  else
    /* Otherwise, specify the current frame, because we want to stop only
       at the very same frame.  */
    breakpoint = set_momentary_breakpoint (sal, get_frame_id (frame),
					   bp_until);
 
  if (!target_can_async_p ())
    old_chain = make_cleanup_delete_breakpoint (breakpoint);
  else
    old_chain = make_exec_cleanup_delete_breakpoint (breakpoint);
 
  /* If we are running asynchronously, and the target supports async
     execution, we are not waiting for the target to stop, in the call
     tp proceed, below. This means that we cannot delete the
     brekpoints until the target has actually stopped. The only place
     where we get a chance to do that is in fetch_inferior_event, so
     we must set things up for that. */
 
  if (target_can_async_p ())
    {
      /* In this case the arg for the continuation is just the point
         in the exec_cleanups chain from where to start doing
         cleanups, because all the continuation does is the cleanups in
         the exec_cleanup_chain. */
      arg1 =
	(struct continuation_arg *) xmalloc (sizeof (struct continuation_arg));
      arg1->next         = NULL;
      arg1->data.pointer = old_chain;
 
      add_continuation (until_break_command_continuation, arg1);
    }
 
  /* Keep within the current frame, or in frames called by the current
     one.  */
  if (prev_frame)
    {
      sal = find_pc_line (get_frame_pc (prev_frame), 0);
      sal.pc = get_frame_pc (prev_frame);
      breakpoint = set_momentary_breakpoint (sal, get_frame_id (prev_frame),
					     bp_until);
      if (!target_can_async_p ())
	make_cleanup_delete_breakpoint (breakpoint);
      else
	make_exec_cleanup_delete_breakpoint (breakpoint);
    }
 
  proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
  /* Do the cleanups now, anly if we are not running asynchronously,
     of if we are, but the target is still synchronous. */
  if (!target_can_async_p ())
    do_cleanups (old_chain);
}
 
static void
ep_skip_leading_whitespace (char **s)
{
  if ((s == NULL) || (*s == NULL))
    return;
  while (isspace (**s))
    *s += 1;
}
 
/* This function examines a string, and attempts to find a token
   that might be an event name in the leading characters.  If a
   possible match is found, a pointer to the last character of
   the token is returned.  Else, NULL is returned. */
 
static char *
ep_find_event_name_end (char *arg)
{
  char *s = arg;
  char *event_name_end = NULL;
 
  /* If we could depend upon the presense of strrpbrk, we'd use that... */
  if (arg == NULL)
    return NULL;
 
  /* We break out of the loop when we find a token delimiter.
     Basically, we're looking for alphanumerics and underscores;
     anything else delimites the token. */
  while (*s != '\0')
    {
      if (!isalnum (*s) && (*s != '_'))
	break;
      event_name_end = s;
      s++;
    }
 
  return event_name_end;
}
 
 
/* This function attempts to parse an optional "if <cond>" clause
   from the arg string.  If one is not found, it returns NULL.
 
   Else, it returns a pointer to the condition string.  (It does not
   attempt to evaluate the string against a particular block.)  And,
   it updates arg to point to the first character following the parsed
   if clause in the arg string. */
 
static char *
ep_parse_optional_if_clause (char **arg)
{
  char *cond_string;
 
  if (((*arg)[0] != 'i') || ((*arg)[1] != 'f') || !isspace ((*arg)[2]))
    return NULL;
 
  /* Skip the "if" keyword. */
  (*arg) += 2;
 
  /* Skip any extra leading whitespace, and record the start of the
     condition string. */
  ep_skip_leading_whitespace (arg);
  cond_string = *arg;
 
  /* Assume that the condition occupies the remainder of the arg string. */
  (*arg) += strlen (cond_string);
 
  return cond_string;
}
 
/* This function attempts to parse an optional filename from the arg
   string.  If one is not found, it returns NULL.
 
   Else, it returns a pointer to the parsed filename.  (This function
   makes no attempt to verify that a file of that name exists, or is
   accessible.)  And, it updates arg to point to the first character
   following the parsed filename in the arg string.
 
   Note that clients needing to preserve the returned filename for
   future access should copy it to their own buffers. */
static char *
ep_parse_optional_filename (char **arg)
{
  static char filename[1024];
  char *arg_p = *arg;
  int i;
  char c;
 
  if ((*arg_p == '\0') || isspace (*arg_p))
    return NULL;
 
  for (i = 0;; i++)
    {
      c = *arg_p;
      if (isspace (c))
	c = '\0';
      filename[i] = c;
      if (c == '\0')
	break;
      arg_p++;
    }
  *arg = arg_p;
 
  return filename;
}
 
/* Commands to deal with catching events, such as signals, exceptions,
   process start/exit, etc.  */
 
typedef enum
{
  catch_fork, catch_vfork
}
catch_fork_kind;
 
static void
catch_fork_command_1 (catch_fork_kind fork_kind, char *arg, int tempflag,
		      int from_tty)
{
  char *cond_string = NULL;
 
  ep_skip_leading_whitespace (&arg);
 
  /* The allowed syntax is:
     catch [v]fork
     catch [v]fork if <cond>
 
     First, check if there's an if clause. */
  cond_string = ep_parse_optional_if_clause (&arg);
 
  if ((*arg != '\0') && !isspace (*arg))
    error (_("Junk at end of arguments."));
 
  /* If this target supports it, create a fork or vfork catchpoint
     and enable reporting of such events. */
  switch (fork_kind)
    {
    case catch_fork:
      create_fork_event_catchpoint (tempflag, cond_string);
      break;
    case catch_vfork:
      create_vfork_event_catchpoint (tempflag, cond_string);
      break;
    default:
      error (_("unsupported or unknown fork kind; cannot catch it"));
      break;
    }
}
 
static void
catch_exec_command_1 (char *arg, int tempflag, int from_tty)
{
  char *cond_string = NULL;
 
  ep_skip_leading_whitespace (&arg);
 
  /* The allowed syntax is:
     catch exec
     catch exec if <cond>
 
     First, check if there's an if clause. */
  cond_string = ep_parse_optional_if_clause (&arg);
 
  if ((*arg != '\0') && !isspace (*arg))
    error (_("Junk at end of arguments."));
 
  /* If this target supports it, create an exec catchpoint
     and enable reporting of such events. */
  create_exec_event_catchpoint (tempflag, cond_string);
}
 
static void
catch_load_command_1 (char *arg, int tempflag, int from_tty)
{
  char *dll_pathname = NULL;
  char *cond_string = NULL;
 
  ep_skip_leading_whitespace (&arg);
 
  /* The allowed syntax is:
     catch load
     catch load if <cond>
     catch load <filename>
     catch load <filename> if <cond>
 
     The user is not allowed to specify the <filename> after an
     if clause.
 
     We'll ignore the pathological case of a file named "if".
 
     First, check if there's an if clause.  If so, then there
     cannot be a filename. */
  cond_string = ep_parse_optional_if_clause (&arg);
 
  /* If there was an if clause, then there cannot be a filename.
     Else, there might be a filename and an if clause. */
  if (cond_string == NULL)
    {
      dll_pathname = ep_parse_optional_filename (&arg);
      ep_skip_leading_whitespace (&arg);
      cond_string = ep_parse_optional_if_clause (&arg);
    }
 
  if ((*arg != '\0') && !isspace (*arg))
    error (_("Junk at end of arguments."));
 
  /* Create a load breakpoint that only triggers when a load of
     the specified dll (or any dll, if no pathname was specified)
     occurs. */
  SOLIB_CREATE_CATCH_LOAD_HOOK (PIDGET (inferior_ptid), tempflag, 
				dll_pathname, cond_string);
}
 
static void
catch_unload_command_1 (char *arg, int tempflag, int from_tty)
{
  char *dll_pathname = NULL;
  char *cond_string = NULL;
 
  ep_skip_leading_whitespace (&arg);
 
  /* The allowed syntax is:
     catch unload
     catch unload if <cond>
     catch unload <filename>
     catch unload <filename> if <cond>
 
     The user is not allowed to specify the <filename> after an
     if clause.
 
     We'll ignore the pathological case of a file named "if".
 
     First, check if there's an if clause.  If so, then there
     cannot be a filename. */
  cond_string = ep_parse_optional_if_clause (&arg);
 
  /* If there was an if clause, then there cannot be a filename.
     Else, there might be a filename and an if clause. */
  if (cond_string == NULL)
    {
      dll_pathname = ep_parse_optional_filename (&arg);
      ep_skip_leading_whitespace (&arg);
      cond_string = ep_parse_optional_if_clause (&arg);
    }
 
  if ((*arg != '\0') && !isspace (*arg))
    error (_("Junk at end of arguments."));
 
  /* Create an unload breakpoint that only triggers when an unload of
     the specified dll (or any dll, if no pathname was specified)
     occurs. */
  SOLIB_CREATE_CATCH_UNLOAD_HOOK (PIDGET (inferior_ptid), tempflag, 
				  dll_pathname, cond_string);
}
 
static enum print_stop_action
print_exception_catchpoint (struct breakpoint *b)
{
  annotate_catchpoint (b->number);
 
  if (strstr (b->addr_string, "throw") != NULL)
    printf_filtered (_("\nCatchpoint %d (exception thrown)\n"),
		     b->number);
  else
    printf_filtered (_("\nCatchpoint %d (exception caught)\n"),
		     b->number);
 
  return PRINT_SRC_AND_LOC;
}
 
static void
print_one_exception_catchpoint (struct breakpoint *b, CORE_ADDR *last_addr)
{
  if (addressprint)
    {
      annotate_field (4);
      ui_out_field_core_addr (uiout, "addr", b->loc->address);
    }
  annotate_field (5);
  *last_addr = b->loc->address;
  if (strstr (b->addr_string, "throw") != NULL)
    ui_out_field_string (uiout, "what", "exception throw");
  else
    ui_out_field_string (uiout, "what", "exception catch");
}
 
static void
print_mention_exception_catchpoint (struct breakpoint *b)
{
  if (strstr (b->addr_string, "throw") != NULL)
    printf_filtered (_("Catchpoint %d (throw)"), b->number);
  else
    printf_filtered (_("Catchpoint %d (catch)"), b->number);
}
 
static struct breakpoint_ops gnu_v3_exception_catchpoint_ops = {
  print_exception_catchpoint,
  print_one_exception_catchpoint,
  print_mention_exception_catchpoint
};
 
static int
handle_gnu_v3_exceptions (int tempflag, char *cond_string,
			  enum exception_event_kind ex_event, int from_tty)
{
  char *trigger_func_name, *nameptr;
  struct symtabs_and_lines sals;
  struct breakpoint *b;
 
  if (ex_event == EX_EVENT_CATCH)
    trigger_func_name = xstrdup ("__cxa_begin_catch");
  else
    trigger_func_name = xstrdup ("__cxa_throw");
 
  nameptr = trigger_func_name;
  sals = decode_line_1 (&nameptr, 1, NULL, 0, NULL, NULL);
  if (sals.nelts == 0)
    {
      xfree (trigger_func_name);
      return 0;
    }
 
  b = set_raw_breakpoint (sals.sals[0], bp_breakpoint);
  set_breakpoint_count (breakpoint_count + 1);
  b->number = breakpoint_count;
  b->cond_string = (cond_string == NULL) ? 
    NULL : savestring (cond_string, strlen (cond_string));
  b->thread = -1;
  b->addr_string = trigger_func_name;
  b->enable_state = bp_enabled;
  b->disposition = tempflag ? disp_del : disp_donttouch;
  b->ops = &gnu_v3_exception_catchpoint_ops;
 
  xfree (sals.sals);
  mention (b);
  return 1;
}
 
/* Deal with "catch catch" and "catch throw" commands */
 
static void
catch_exception_command_1 (enum exception_event_kind ex_event, char *arg,
			   int tempflag, int from_tty)
{
  char *cond_string = NULL;
  struct symtab_and_line *sal = NULL;
 
  ep_skip_leading_whitespace (&arg);
 
  cond_string = ep_parse_optional_if_clause (&arg);
 
  if ((*arg != '\0') && !isspace (*arg))
    error (_("Junk at end of arguments."));
 
  if ((ex_event != EX_EVENT_THROW) &&
      (ex_event != EX_EVENT_CATCH))
    error (_("Unsupported or unknown exception event; cannot catch it"));
 
  if (handle_gnu_v3_exceptions (tempflag, cond_string, ex_event, from_tty))
    return;
 
  warning (_("Unsupported with this platform/compiler combination."));
}
 
/* Create a breakpoint struct for Ada exception catchpoints.  */
 
static void
create_ada_exception_breakpoint (struct symtab_and_line sal,
                                 char *addr_string,
                                 char *exp_string,
                                 char *cond_string,
                                 struct expression *cond,
                                 struct breakpoint_ops *ops,
                                 int tempflag,
                                 int from_tty)
{
  struct breakpoint *b;
 
  if (from_tty)
    {
      describe_other_breakpoints (sal.pc, sal.section, -1);
      /* FIXME: brobecker/2006-12-28: Actually, re-implement a special
         version for exception catchpoints, because two catchpoints
         used for different exception names will use the same address.
         In this case, a "breakpoint ... also set at..." warning is
         unproductive.  Besides. the warning phrasing is also a bit
         inapropriate, we should use the word catchpoint, and tell
         the user what type of catchpoint it is.  The above is good
         enough for now, though.  */
    }
 
  b = set_raw_breakpoint (sal, bp_breakpoint);
  set_breakpoint_count (breakpoint_count + 1);
 
  b->enable_state = bp_enabled;
  b->disposition = tempflag ? disp_del : disp_donttouch;
  b->number = breakpoint_count;
  b->ignore_count = 0;
  b->loc->cond = cond;
  b->addr_string = addr_string;
  b->language = language_ada;
  b->cond_string = cond_string;
  b->exp_string = exp_string;
  b->thread = -1;
  b->ops = ops;
 
  mention (b);
}
 
/* Implement the "catch exception" command.  */
 
static void
catch_ada_exception_command (char *arg, int tempflag, int from_tty)
{
  struct symtab_and_line sal;
  enum bptype type;
  char *addr_string = NULL;
  char *exp_string = NULL;
  char *cond_string = NULL;
  struct expression *cond = NULL;
  struct breakpoint_ops *ops = NULL;
 
  sal = ada_decode_exception_location (arg, &addr_string, &exp_string,
                                       &cond_string, &cond, &ops);
  create_ada_exception_breakpoint (sal, addr_string, exp_string,
                                   cond_string, cond, ops, tempflag,
                                   from_tty);
}
 
/* Implement the "catch assert" command.  */
 
static void
catch_assert_command (char *arg, int tempflag, int from_tty)
{
  struct symtab_and_line sal;
  char *addr_string = NULL;
  struct breakpoint_ops *ops = NULL;
 
  sal = ada_decode_assert_location (arg, &addr_string, &ops);
  create_ada_exception_breakpoint (sal, addr_string, NULL, NULL, NULL, ops,
                                   tempflag, from_tty);
}
 
static void
catch_command_1 (char *arg, int tempflag, int from_tty)
{
 
  /* The first argument may be an event name, such as "start" or "load".
     If so, then handle it as such.  If it doesn't match an event name,
     then attempt to interpret it as an exception name.  (This latter is
     the v4.16-and-earlier GDB meaning of the "catch" command.)
 
     First, try to find the bounds of what might be an event name. */
  char *arg1_start = arg;
  char *arg1_end;
  int arg1_length;
 
  if (arg1_start == NULL)
    {
      /* Old behaviour was to use pre-v-4.16 syntax */
      /* catch_throw_command_1 (arg1_start, tempflag, from_tty); */
      /* return; */
      /* Now, this is not allowed */
      error (_("Catch requires an event name."));
 
    }
  arg1_end = ep_find_event_name_end (arg1_start);
  if (arg1_end == NULL)
    error (_("catch requires an event"));
  arg1_length = arg1_end + 1 - arg1_start;
 
  /* Try to match what we found against known event names. */
  if (strncmp (arg1_start, "signal", arg1_length) == 0)
    {
      error (_("Catch of signal not yet implemented"));
    }
  else if (strncmp (arg1_start, "catch", arg1_length) == 0)
    {
      catch_exception_command_1 (EX_EVENT_CATCH, arg1_end + 1, 
				 tempflag, from_tty);
    }
  else if (strncmp (arg1_start, "throw", arg1_length) == 0)
    {
      catch_exception_command_1 (EX_EVENT_THROW, arg1_end + 1, 
				 tempflag, from_tty);
    }
  else if (strncmp (arg1_start, "thread_start", arg1_length) == 0)
    {
      error (_("Catch of thread_start not yet implemented"));
    }
  else if (strncmp (arg1_start, "thread_exit", arg1_length) == 0)
    {
      error (_("Catch of thread_exit not yet implemented"));
    }
  else if (strncmp (arg1_start, "thread_join", arg1_length) == 0)
    {
      error (_("Catch of thread_join not yet implemented"));
    }
  else if (strncmp (arg1_start, "start", arg1_length) == 0)
    {
      error (_("Catch of start not yet implemented"));
    }
  else if (strncmp (arg1_start, "exit", arg1_length) == 0)
    {
      error (_("Catch of exit not yet implemented"));
    }
  else if (strncmp (arg1_start, "fork", arg1_length) == 0)
    {
      catch_fork_command_1 (catch_fork, arg1_end + 1, tempflag, from_tty);
    }
  else if (strncmp (arg1_start, "vfork", arg1_length) == 0)
    {
      catch_fork_command_1 (catch_vfork, arg1_end + 1, tempflag, from_tty);
    }
  else if (strncmp (arg1_start, "exec", arg1_length) == 0)
    {
      catch_exec_command_1 (arg1_end + 1, tempflag, from_tty);
    }
  else if (strncmp (arg1_start, "load", arg1_length) == 0)
    {
      catch_load_command_1 (arg1_end + 1, tempflag, from_tty);
    }
  else if (strncmp (arg1_start, "unload", arg1_length) == 0)
    {
      catch_unload_command_1 (arg1_end + 1, tempflag, from_tty);
    }
  else if (strncmp (arg1_start, "stop", arg1_length) == 0)
    {
      error (_("Catch of stop not yet implemented"));
    }
  else if (strncmp (arg1_start, "exception", arg1_length) == 0)
    {
      catch_ada_exception_command (arg1_end + 1, tempflag, from_tty);
    }
 
  else if (strncmp (arg1_start, "assert", arg1_length) == 0)
    {
      catch_assert_command (arg1_end + 1, tempflag, from_tty);
    }
 
  /* This doesn't appear to be an event name */
 
  else
    {
      /* Pre-v.4.16 behaviour was to treat the argument
         as the name of an exception */
      /* catch_throw_command_1 (arg1_start, tempflag, from_tty); */
      /* Now this is not allowed */
      error (_("Unknown event kind specified for catch"));
 
    }
}
 
static void
catch_command (char *arg, int from_tty)
{
  catch_command_1 (arg, 0, from_tty);
}

 
static void
tcatch_command (char *arg, int from_tty)
{
  catch_command_1 (arg, 1, from_tty);
}
 
/* Delete breakpoints by address or line.  */
 
static void
clear_command (char *arg, int from_tty)
{
  struct breakpoint *b;
  VEC(breakpoint_p) *found = 0;
  int ix;
  int default_match;
  struct symtabs_and_lines sals;
  struct symtab_and_line sal;
  int i;
 
  if (arg)
    {
      sals = decode_line_spec (arg, 1);
      default_match = 0;
    }
  else
    {
      sals.sals = (struct symtab_and_line *)
	xmalloc (sizeof (struct symtab_and_line));
      make_cleanup (xfree, sals.sals);
      init_sal (&sal);		/* initialize to zeroes */
      sal.line = default_breakpoint_line;
      sal.symtab = default_breakpoint_symtab;
      sal.pc = default_breakpoint_address;
      if (sal.symtab == 0)
	error (_("No source file specified."));
 
      sals.sals[0] = sal;
      sals.nelts = 1;
 
      default_match = 1;
    }
 
  /* We don't call resolve_sal_pc here. That's not
     as bad as it seems, because all existing breakpoints
     typically have both file/line and pc set.  So, if
     clear is given file/line, we can match this to existing
     breakpoint without obtaining pc at all.
 
     We only support clearing given the address explicitly 
     present in breakpoint table.  Say, we've set breakpoint 
     at file:line. There were several PC values for that file:line,
     due to optimization, all in one block.
     We've picked one PC value. If "clear" is issued with another
     PC corresponding to the same file:line, the breakpoint won't
     be cleared.  We probably can still clear the breakpoint, but 
     since the other PC value is never presented to user, user
     can only find it by guessing, and it does not seem important
     to support that.  */
 
  /* For each line spec given, delete bps which correspond
     to it.  Do it in two passes, solely to preserve the current
     behavior that from_tty is forced true if we delete more than
     one breakpoint.  */
 
  found = NULL;
  for (i = 0; i < sals.nelts; i++)
    {
      /* If exact pc given, clear bpts at that pc.
         If line given (pc == 0), clear all bpts on specified line.
         If defaulting, clear all bpts on default line
         or at default pc.
 
         defaulting    sal.pc != 0    tests to do
 
         0              1             pc
         1              1             pc _and_ line
         0              0             line
         1              0             <can't happen> */
 
      sal = sals.sals[i];
 
      /* Find all matching breakpoints and add them to
	 'found'.  */
      ALL_BREAKPOINTS (b)
	{
	  int match = 0;
	  /* Are we going to delete b? */
	  if (b->type != bp_none
	      && b->type != bp_watchpoint
	      && b->type != bp_hardware_watchpoint
	      && b->type != bp_read_watchpoint
	      && b->type != bp_access_watchpoint)
	    {
	      struct bp_location *loc = b->loc;
	      for (; loc; loc = loc->next)
		{
		  int pc_match = sal.pc 
		    && (loc->address == sal.pc)
		    && (!section_is_overlay (loc->section)
			|| loc->section == sal.section);
		  int line_match = ((default_match || (0 == sal.pc))
				    && b->source_file != NULL
				    && sal.symtab != NULL
				    && strcmp (b->source_file, sal.symtab->filename) == 0
				    && b->line_number == sal.line);
		  if (pc_match || line_match)
		    {
		      match = 1;
		      break;
		    }
		}
	    }
 
	  if (match)
	    VEC_safe_push(breakpoint_p, found, b);
	}
    }
  /* Now go thru the 'found' chain and delete them.  */
  if (VEC_empty(breakpoint_p, found))
    {
      if (arg)
	error (_("No breakpoint at %s."), arg);
      else
	error (_("No breakpoint at this line."));
    }
 
  if (VEC_length(breakpoint_p, found) > 1)
    from_tty = 1;		/* Always report if deleted more than one */
  if (from_tty)
    {
      if (VEC_length(breakpoint_p, found) == 1)
	printf_unfiltered (_("Deleted breakpoint "));
      else
	printf_unfiltered (_("Deleted breakpoints "));
    }
  breakpoints_changed ();
 
  for (ix = 0; VEC_iterate(breakpoint_p, found, ix, b); ix++)
    {
      if (from_tty)
	printf_unfiltered ("%d ", b->number);
      delete_breakpoint (b);
    }
  if (from_tty)
    putchar_unfiltered ('\n');
}

/* Delete breakpoint in BS if they are `delete' breakpoints and
   all breakpoints that are marked for deletion, whether hit or not.
   This is called after any breakpoint is hit, or after errors.  */
 
void
breakpoint_auto_delete (bpstat bs)
{
  struct breakpoint *b, *temp;
 
  for (; bs; bs = bs->next)
    if (bs->breakpoint_at && bs->breakpoint_at->owner->disposition == disp_del
	&& bs->stop)
      delete_breakpoint (bs->breakpoint_at->owner);
 
  ALL_BREAKPOINTS_SAFE (b, temp)
  {
    if (b->disposition == disp_del_at_next_stop)
      delete_breakpoint (b);
  }
}
 
/* Remove locations of breakpoint BPT from
   the global list of breakpoint locations.  */
 
static void
unlink_locations_from_global_list (struct breakpoint *bpt)
{
  /* This code assumes that the locations
     of a breakpoint are found in the global list
     in the same order,  but not necessary adjacent.  */
  struct bp_location **tmp = &bp_location_chain;
  struct bp_location *here = bpt->loc;
 
  if (here == NULL)
    return;
 
  for (; *tmp && here;)
    {
      if (*tmp == here)
	{
	  *tmp = here->global_next;
	  here = here->next;
	}
      else
	{
	  tmp = &((*tmp)->global_next);
	}
    }
}
 
/* Delete a breakpoint and clean up all traces of it in the data
   structures. */
 
void
delete_breakpoint (struct breakpoint *bpt)
{
  struct breakpoint *b;
  bpstat bs;
  struct bp_location *loc;
 
  gdb_assert (bpt != NULL);
 
  /* Has this bp already been deleted?  This can happen because multiple
     lists can hold pointers to bp's.  bpstat lists are especial culprits.
 
     One example of this happening is a watchpoint's scope bp.  When the
     scope bp triggers, we notice that the watchpoint is out of scope, and
     delete it.  We also delete its scope bp.  But the scope bp is marked
     "auto-deleting", and is already on a bpstat.  That bpstat is then
     checked for auto-deleting bp's, which are deleted.
 
     A real solution to this problem might involve reference counts in bp's,
     and/or giving them pointers back to their referencing bpstat's, and
     teaching delete_breakpoint to only free a bp's storage when no more
     references were extent.  A cheaper bandaid was chosen.  */
  if (bpt->type == bp_none)
    return;
 
  if (deprecated_delete_breakpoint_hook)
    deprecated_delete_breakpoint_hook (bpt);
  breakpoint_delete_event (bpt->number);
 
  for (loc = bpt->loc; loc; loc = loc->next)
    {
      if (loc->inserted)
	remove_breakpoint (loc, mark_inserted);
 
      if (loc->cond)
	xfree (loc->cond);
 
      if (loc->function_name)
	xfree (loc->function_name);
    }
 
  if (breakpoint_chain == bpt)
    breakpoint_chain = bpt->next;
 
  ALL_BREAKPOINTS (b)
    if (b->next == bpt)
    {
      b->next = bpt->next;
      break;
    }
 
  unlink_locations_from_global_list (bpt);
 
  check_duplicates (bpt);
 
  if (bpt->type != bp_hardware_watchpoint
      && bpt->type != bp_read_watchpoint
      && bpt->type != bp_access_watchpoint
      && bpt->type != bp_catch_fork
      && bpt->type != bp_catch_vfork
      && bpt->type != bp_catch_exec)
    for (loc = bpt->loc; loc; loc = loc->next)
      {
	/* If this breakpoint location was inserted, and there is 
	   another breakpoint at the same address, we need to 
	   insert the other breakpoint.  */
	if (loc->inserted)
	  {
	    struct bp_location *loc2;
	    ALL_BP_LOCATIONS (loc2)
	      if (loc2->address == loc->address
		  && loc2->section == loc->section
		  && !loc->duplicate
		  && loc2->owner->enable_state != bp_disabled
		  && loc2->enabled 
		  && !loc2->shlib_disabled
		  && loc2->owner->enable_state != bp_call_disabled)
		{
		  int val;
 
		  /* We should never reach this point if there is a permanent
		     breakpoint at the same address as the one being deleted.
		     If there is a permanent breakpoint somewhere, it should
		     always be the only one inserted.  */
		  if (loc2->owner->enable_state == bp_permanent)
		    internal_error (__FILE__, __LINE__,
				    _("another breakpoint was inserted on top of "
				      "a permanent breakpoint"));
 
		  memset (&loc2->target_info, 0, sizeof (loc2->target_info));
		  loc2->target_info.placed_address = loc2->address;
		  if (b->type == bp_hardware_breakpoint)
		    val = target_insert_hw_breakpoint (&loc2->target_info);
		  else
		    val = target_insert_breakpoint (&loc2->target_info);
 
		  /* If there was an error in the insert, print a message, then stop execution.  */
		  if (val != 0)
		    {
		      struct ui_file *tmp_error_stream = mem_fileopen ();
		      make_cleanup_ui_file_delete (tmp_error_stream);
 
 
		      if (b->type == bp_hardware_breakpoint)
			{
			  fprintf_unfiltered (tmp_error_stream, 
					      "Cannot insert hardware breakpoint %d.\n"
					      "You may have requested too many hardware breakpoints.\n",
					      b->number);
			}
		      else
			{
			  fprintf_unfiltered (tmp_error_stream, "Cannot insert breakpoint %d.\n", b->number);
			  fprintf_filtered (tmp_error_stream, "Error accessing memory address ");
			  fputs_filtered (paddress (loc2->address),
					  tmp_error_stream);
			  fprintf_filtered (tmp_error_stream, ": %s.\n",
					    safe_strerror (val));
			}
 
		      fprintf_unfiltered (tmp_error_stream,"The same program may be running in another process.");
		      target_terminal_ours_for_output ();
		      error_stream(tmp_error_stream); 
		    }
		  else
		    loc2->inserted = 1;
		}
	  }
      }
 
  free_command_lines (&bpt->commands);
  if (bpt->cond_string != NULL)
    xfree (bpt->cond_string);
  if (bpt->addr_string != NULL)
    xfree (bpt->addr_string);
  if (bpt->exp != NULL)
    xfree (bpt->exp);
  if (bpt->exp_string != NULL)
    xfree (bpt->exp_string);
  if (bpt->val != NULL)
    value_free (bpt->val);
  if (bpt->source_file != NULL)
    xfree (bpt->source_file);
  if (bpt->dll_pathname != NULL)
    xfree (bpt->dll_pathname);
  if (bpt->triggered_dll_pathname != NULL)
    xfree (bpt->triggered_dll_pathname);
  if (bpt->exec_pathname != NULL)
    xfree (bpt->exec_pathname);
 
  /* Be sure no bpstat's are pointing at it after it's been freed.  */
  /* FIXME, how can we find all bpstat's?
     We just check stop_bpstat for now.  Note that we cannot just
     remove bpstats pointing at bpt from the stop_bpstat list
     entirely, as breakpoint commands are associated with the bpstat;
     if we remove it here, then the later call to
         bpstat_do_actions (&stop_bpstat);
     in event-top.c won't do anything, and temporary breakpoints
     with commands won't work.  */
  for (bs = stop_bpstat; bs; bs = bs->next)
    if (bs->breakpoint_at && bs->breakpoint_at->owner == bpt)
      {
	bs->breakpoint_at = NULL;
	bs->old_val = NULL;
	/* bs->commands will be freed later.  */
      }
  /* On the chance that someone will soon try again to delete this same
     bp, we mark it as deleted before freeing its storage. */
  bpt->type = bp_none;
 
  for (loc = bpt->loc; loc;)
    {
      struct bp_location *loc_next = loc->next;
      xfree (loc);
      loc = loc_next;
    }
  xfree (bpt);
}
 
static void
do_delete_breakpoint_cleanup (void *b)
{
  delete_breakpoint (b);
}
 
struct cleanup *
make_cleanup_delete_breakpoint (struct breakpoint *b)
{
  return make_cleanup (do_delete_breakpoint_cleanup, b);
}
 
struct cleanup *
make_exec_cleanup_delete_breakpoint (struct breakpoint *b)
{
  return make_exec_cleanup (do_delete_breakpoint_cleanup, b);
}
 
void
delete_command (char *arg, int from_tty)
{
  struct breakpoint *b, *temp;
 
  dont_repeat ();
 
  if (arg == 0)
    {
      int breaks_to_delete = 0;
 
      /* Delete all breakpoints if no argument.
         Do not delete internal or call-dummy breakpoints, these
         have to be deleted with an explicit breakpoint number argument.  */
      ALL_BREAKPOINTS (b)
      {
	if (b->type != bp_call_dummy &&
	    b->type != bp_shlib_event &&
	    b->type != bp_thread_event &&
	    b->type != bp_overlay_event &&
	    b->number >= 0)
	  {
	    breaks_to_delete = 1;
	    break;
	  }
      }
 
      /* Ask user only if there are some breakpoints to delete.  */
      if (!from_tty
	  || (breaks_to_delete && query (_("Delete all breakpoints? "))))
	{
	  ALL_BREAKPOINTS_SAFE (b, temp)
	  {
	    if (b->type != bp_call_dummy &&
		b->type != bp_shlib_event &&
		b->type != bp_thread_event &&
		b->type != bp_overlay_event &&
		b->number >= 0)
	      delete_breakpoint (b);
	  }
	}
    }
  else
    map_breakpoint_numbers (arg, delete_breakpoint);
}
 
static int
all_locations_are_pending (struct bp_location *loc)
{
  for (; loc; loc = loc->next)
    if (!loc->shlib_disabled)
      return 0;
  return 1;
}
 
/* Subroutine of update_breakpoint_locations to simplify it.
   Return non-zero if multiple fns in list LOC have the same name.
   Null names are ignored.  */
 
static int
ambiguous_names_p (struct bp_location *loc)
{
  struct bp_location *l;
  htab_t htab = htab_create_alloc (13, htab_hash_string,
				   (int (*) (const void *, const void *)) streq,
				   NULL, xcalloc, xfree);
 
  for (l = loc; l != NULL; l = l->next)
    {
      const char **slot;
      const char *name = l->function_name;
 
      /* Allow for some names to be NULL, ignore them.  */
      if (name == NULL)
	continue;
 
      slot = (const char **) htab_find_slot (htab, (const void *) name,
					     INSERT);
      /* NOTE: We can assume slot != NULL here because xcalloc never returns
	 NULL.  */
      if (*slot != NULL)
	{
	  htab_delete (htab);
	  return 1;
	}
      *slot = name;
    }
 
  htab_delete (htab);
  return 0;
}
 
static void
update_breakpoint_locations (struct breakpoint *b,
			     struct symtabs_and_lines sals)
{
  int i;
  char *s;
  struct bp_location *existing_locations = b->loc;
 
  /* If there's no new locations, and all existing locations
     are pending, don't do anything.  This optimizes
     the common case where all locations are in the same
     shared library, that was unloaded. We'd like to
     retain the location, so that when the library
     is loaded again, we don't loose the enabled/disabled
     status of the individual locations.  */
  if (all_locations_are_pending (existing_locations) && sals.nelts == 0)
    return;
 
  unlink_locations_from_global_list (b);
  b->loc = NULL;
 
  for (i = 0; i < sals.nelts; ++i)
    {
      struct bp_location *new_loc = 
	add_location_to_breakpoint (b, b->type, &(sals.sals[i]));
 
      /* Reparse conditions, they might contain references to the
	 old symtab.  */
      if (b->cond_string != NULL)
	{
	  struct gdb_exception e;
 
	  s = b->cond_string;
	  TRY_CATCH (e, RETURN_MASK_ERROR)
	    {
	      new_loc->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc), 
					   0);
	    }
	  if (e.reason < 0)
	    {
	      warning (_("failed to reevaluate condition for breakpoint %d: %s"), 
		       b->number, e.message);
	      new_loc->enabled = 0;
	    }
	}
 
      if (b->source_file != NULL)
	xfree (b->source_file);
      if (sals.sals[i].symtab == NULL)
	b->source_file = NULL;
      else
	b->source_file =
	  savestring (sals.sals[i].symtab->filename,
		      strlen (sals.sals[i].symtab->filename));
 
      if (b->line_number == 0)
	b->line_number = sals.sals[i].line;
    }
 
  /* If possible, carry over 'disable' status from existing breakpoints.  */
  {
    struct bp_location *e = existing_locations;
    /* If there are multiple breakpoints with the same function name,
       e.g. for inline functions, comparing function names won't work.
       Instead compare pc addresses; this is just a heuristic as things
       may have moved, but in practice it gives the correct answer
       often enough until a better solution is found.  */
    int have_ambiguous_names = ambiguous_names_p (b->loc);
 
    for (; e; e = e->next)
      {
	if (!e->enabled && e->function_name)
	  {
	    struct bp_location *l = b->loc;
	    if (have_ambiguous_names)
	      {
		for (; l; l = l->next)
		  if (e->address == l->address)
		    {
		      l->enabled = 0;
		      break;
		    }
	      }
	    else
	      {
		for (; l; l = l->next)
		  if (l->function_name
		      && strcmp (e->function_name, l->function_name) == 0)
		    {
		      l->enabled = 0;
		      break;
		    }
	      }
	  }
      }
  }
 
  while (existing_locations)
    {
      struct bp_location *next = existing_locations->next;
      free_bp_location (existing_locations);
      existing_locations = next;
    }
}
 
 
/* Reset a breakpoint given it's struct breakpoint * BINT.
   The value we return ends up being the return value from catch_errors.
   Unused in this case.  */
 
static int
breakpoint_re_set_one (void *bint)
{
  /* get past catch_errs */
  struct breakpoint *b = (struct breakpoint *) bint;
  struct value *mark;
  int i;
  int not_found = 0;
  int *not_found_ptr = &not_found;
  struct symtabs_and_lines sals = {};
  struct symtabs_and_lines expanded;
  char *s;
  enum enable_state save_enable;
  struct gdb_exception e;
 
 
  switch (b->type)
    {
    case bp_none:
      warning (_("attempted to reset apparently deleted breakpoint #%d?"),
	       b->number);
      return 0;
    case bp_breakpoint:
    case bp_hardware_breakpoint:
    case bp_catch_load:
    case bp_catch_unload:
      if (b->addr_string == NULL)
	{
	  /* Anything without a string can't be re-set. */
	  delete_breakpoint (b);
	  return 0;
	}
 
      set_language (b->language);
      input_radix = b->input_radix;
      s = b->addr_string;
      TRY_CATCH (e, RETURN_MASK_ERROR)
	{
	  sals = decode_line_1 (&s, 1, (struct symtab *) NULL, 0, (char ***) NULL,
				not_found_ptr);
	}
      if (e.reason < 0)
	{
	  int not_found_and_ok = 0;
	  /* For pending breakpoints, it's expected that parsing
	     will fail until the right shared library is loaded.
	     User has already told to create pending breakpoints and
	     don't need extra messages.  If breakpoint is in bp_shlib_disabled
	     state, then user already saw the message about that breakpoint
	     being disabled, and don't want to see more errors.  */
	  if (not_found 
	      && (b->condition_not_parsed 
		  || (b->loc && b->loc->shlib_disabled)
		  || b->enable_state == bp_disabled))
	    not_found_and_ok = 1;
 
	  if (!not_found_and_ok)
	    {
	      /* We surely don't want to warn about the same breakpoint
		 10 times.  One solution, implemented here, is disable
		 the breakpoint on error.  Another solution would be to
		 have separate 'warning emitted' flag.  Since this
		 happens only when a binary has changed, I don't know
		 which approach is better.  */
	      b->enable_state = bp_disabled;
	      throw_exception (e);
	    }
	}
 
      if (not_found)
	break;
 
      gdb_assert (sals.nelts == 1);
      resolve_sal_pc (&sals.sals[0]);
      if (b->condition_not_parsed && s && s[0])
	{
	  char *cond_string = 0;
	  int thread = -1;
	  find_condition_and_thread (s, sals.sals[0].pc, 
				     &cond_string, &thread);
	  if (cond_string)
	    b->cond_string = cond_string;
	  b->thread = thread;
	  b->condition_not_parsed = 0;
	}
      expanded = expand_line_sal_maybe (sals.sals[0]);
      update_breakpoint_locations (b, expanded);
 
      /* Now that this is re-enabled, check_duplicates
	 can be used. */
      check_duplicates (b);
 
      xfree (sals.sals);
      break;
 
    case bp_watchpoint:
    case bp_hardware_watchpoint:
    case bp_read_watchpoint:
    case bp_access_watchpoint:
      /* Watchpoint can be either on expression using entirely global variables,
	 or it can be on local variables.
 
	 Watchpoints of the first kind are never auto-deleted, and even persist
	 across program restarts. Since they can use variables from shared 
	 libraries, we need to reparse expression as libraries are loaded
	 and unloaded.
 
	 Watchpoints on local variables can also change meaning as result
	 of solib event. For example, if a watchpoint uses both a local and
	 a global variables in expression, it's a local watchpoint, but
	 unloading of a shared library will make the expression invalid.
	 This is not a very common use case, but we still re-evaluate
	 expression, to avoid surprises to the user. 
 
	 Note that for local watchpoints, we re-evaluate it only if
	 watchpoints frame id is still valid.  If it's not, it means
	 the watchpoint is out of scope and will be deleted soon. In fact,
	 I'm not sure we'll ever be called in this case.  
 
	 If a local watchpoint's frame id is still valid, then
	 b->exp_valid_block is likewise valid, and we can safely use it.  
 
	 Don't do anything about disabled watchpoints, since they will
	 be reevaluated again when enabled.  */
      update_watchpoint (b, 1 /* reparse */);
      break;
      /* We needn't really do anything to reset these, since the mask
         that requests them is unaffected by e.g., new libraries being
         loaded. */
    case bp_catch_fork:
    case bp_catch_vfork:
    case bp_catch_exec:
      break;
 
    default:
      printf_filtered (_("Deleting unknown breakpoint type %d\n"), b->type);
      /* fall through */
      /* Delete longjmp and overlay event breakpoints; they will be
         reset later by breakpoint_re_set.  */
    case bp_longjmp:
    case bp_longjmp_resume:
    case bp_overlay_event:
      delete_breakpoint (b);
      break;
 
      /* This breakpoint is special, it's set up when the inferior
         starts and we really don't want to touch it.  */
    case bp_shlib_event:
 
      /* Like bp_shlib_event, this breakpoint type is special.
	 Once it is set up, we do not want to touch it.  */
    case bp_thread_event:
 
      /* Keep temporary breakpoints, which can be encountered when we step
         over a dlopen call and SOLIB_ADD is resetting the breakpoints.
         Otherwise these should have been blown away via the cleanup chain
         or by breakpoint_init_inferior when we rerun the executable.  */
    case bp_until:
    case bp_finish:
    case bp_watchpoint_scope:
    case bp_call_dummy:
    case bp_step_resume:
      break;
    }
 
  return 0;
}
 
/* Re-set all breakpoints after symbols have been re-loaded.  */
void
breakpoint_re_set (void)
{
  struct breakpoint *b, *temp;
  enum language save_language;
  int save_input_radix;
 
  save_language = current_language->la_language;
  save_input_radix = input_radix;
  ALL_BREAKPOINTS_SAFE (b, temp)
  {
    /* Format possible error msg */
    char *message = xstrprintf ("Error in re-setting breakpoint %d: ",
				b->number);
    struct cleanup *cleanups = make_cleanup (xfree, message);
    catch_errors (breakpoint_re_set_one, b, message, RETURN_MASK_ALL);
    do_cleanups (cleanups);
  }
  set_language (save_language);
  input_radix = save_input_radix;
 
  if (gdbarch_get_longjmp_target_p (current_gdbarch))
    {
      create_longjmp_breakpoint ("longjmp");
      create_longjmp_breakpoint ("_longjmp");
      create_longjmp_breakpoint ("siglongjmp");
      create_longjmp_breakpoint ("_siglongjmp");
      create_longjmp_breakpoint (NULL);
    }
 
  create_overlay_event_breakpoint ("_ovly_debug_event");
}

/* Reset the thread number of this breakpoint:
 
   - If the breakpoint is for all threads, leave it as-is.
   - Else, reset it to the current thread for inferior_ptid. */
void
breakpoint_re_set_thread (struct breakpoint *b)
{
  if (b->thread != -1)
    {
      if (in_thread_list (inferior_ptid))
	b->thread = pid_to_thread_id (inferior_ptid);
    }
}
 
/* Set ignore-count of breakpoint number BPTNUM to COUNT.
   If from_tty is nonzero, it prints a message to that effect,
   which ends with a period (no newline).  */
 
void
set_ignore_count (int bptnum, int count, int from_tty)
{
  struct breakpoint *b;
 
  if (count < 0)
    count = 0;
 
  ALL_BREAKPOINTS (b)
    if (b->number == bptnum)
    {
      b->ignore_count = count;
      if (from_tty)
	{
	  if (count == 0)
	    printf_filtered (_("Will stop next time breakpoint %d is reached."),
			     bptnum);
	  else if (count == 1)
	    printf_filtered (_("Will ignore next crossing of breakpoint %d."),
			     bptnum);
	  else
	    printf_filtered (_("Will ignore next %d crossings of breakpoint %d."),
			     count, bptnum);
	}
      breakpoints_changed ();
      breakpoint_modify_event (b->number);
      return;
    }
 
  error (_("No breakpoint number %d."), bptnum);
}
 
/* Clear the ignore counts of all breakpoints.  */
void
breakpoint_clear_ignore_counts (void)
{
  struct breakpoint *b;
 
  ALL_BREAKPOINTS (b)
    b->ignore_count = 0;
}
 
/* Command to set ignore-count of breakpoint N to COUNT.  */
 
static void
ignore_command (char *args, int from_tty)
{
  char *p = args;
  int num;
 
  if (p == 0)
    error_no_arg (_("a breakpoint number"));
 
  num = get_number (&p);
  if (num == 0)
    error (_("bad breakpoint number: '%s'"), args);
  if (*p == 0)
    error (_("Second argument (specified ignore-count) is missing."));
 
  set_ignore_count (num,
		    longest_to_int (value_as_long (parse_and_eval (p))),
		    from_tty);
  if (from_tty)
    printf_filtered ("\n");
}

/* Call FUNCTION on each of the breakpoints
   whose numbers are given in ARGS.  */
 
static void
map_breakpoint_numbers (char *args, void (*function) (struct breakpoint *))
{
  char *p = args;
  char *p1;
  int num;
  struct breakpoint *b, *tmp;
  int match;
 
  if (p == 0)
    error_no_arg (_("one or more breakpoint numbers"));
 
  while (*p)
    {
      match = 0;
      p1 = p;
 
      num = get_number_or_range (&p1);
      if (num == 0)
	{
	  warning (_("bad breakpoint number at or near '%s'"), p);
	}
      else
	{
	  ALL_BREAKPOINTS_SAFE (b, tmp)
	    if (b->number == num)
	      {
		struct breakpoint *related_breakpoint = b->related_breakpoint;
		match = 1;
		function (b);
		if (related_breakpoint)
		  function (related_breakpoint);
		break;
	      }
	  if (match == 0)
	    printf_unfiltered (_("No breakpoint number %d.\n"), num);
	}
      p = p1;
    }
}
 
static struct bp_location *
find_location_by_number (char *number)
{
  char *dot = strchr (number, '.');
  char *p1;
  int bp_num;
  int loc_num;
  struct breakpoint *b;
  struct bp_location *loc;  
 
  *dot = '\0';
 
  p1 = number;
  bp_num = get_number_or_range (&p1);
  if (bp_num == 0)
    error (_("Bad breakpoint number '%s'"), number);
 
  ALL_BREAKPOINTS (b)
    if (b->number == bp_num)
      {
	break;
      }
 
  if (!b || b->number != bp_num)
    error (_("Bad breakpoint number '%s'"), number);
 
  p1 = dot+1;
  loc_num = get_number_or_range (&p1);
  if (loc_num == 0)
    error (_("Bad breakpoint location number '%s'"), number);
 
  --loc_num;
  loc = b->loc;
  for (;loc_num && loc; --loc_num, loc = loc->next)
    ;
  if (!loc)
    error (_("Bad breakpoint location number '%s'"), dot+1);
 
  return loc;  
}
 
 
/* Set ignore-count of breakpoint number BPTNUM to COUNT.
   If from_tty is nonzero, it prints a message to that effect,
   which ends with a period (no newline).  */
 
void
disable_breakpoint (struct breakpoint *bpt)
{
  /* Never disable a watchpoint scope breakpoint; we want to
     hit them when we leave scope so we can delete both the
     watchpoint and its scope breakpoint at that time.  */
  if (bpt->type == bp_watchpoint_scope)
    return;
 
  /* You can't disable permanent breakpoints.  */
  if (bpt->enable_state == bp_permanent)
    return;
 
  bpt->enable_state = bp_disabled;
 
  check_duplicates (bpt);
 
  if (deprecated_modify_breakpoint_hook)
    deprecated_modify_breakpoint_hook (bpt);
  breakpoint_modify_event (bpt->number);
}
 
static void
disable_command (char *args, int from_tty)
{
  struct breakpoint *bpt;
  if (args == 0)
    ALL_BREAKPOINTS (bpt)
      switch (bpt->type)
      {
      case bp_none:
	warning (_("attempted to disable apparently deleted breakpoint #%d?"),
		 bpt->number);
	continue;
      case bp_breakpoint:
      case bp_catch_load:
      case bp_catch_unload:
      case bp_catch_fork:
      case bp_catch_vfork:
      case bp_catch_exec:
      case bp_hardware_breakpoint:
      case bp_watchpoint:
      case bp_hardware_watchpoint:
      case bp_read_watchpoint:
      case bp_access_watchpoint:
	disable_breakpoint (bpt);
      default:
	continue;
      }
  else if (strchr (args, '.'))
    {
      struct bp_location *loc = find_location_by_number (args);
      if (loc)
	loc->enabled = 0;
      check_duplicates (loc->owner);
    }
  else
    map_breakpoint_numbers (args, disable_breakpoint);
}
 
static void
do_enable_breakpoint (struct breakpoint *bpt, enum bpdisp disposition)
{
  int target_resources_ok, other_type_used;
  struct value *mark;
 
  if (bpt->type == bp_hardware_breakpoint)
    {
      int i;
      i = hw_breakpoint_used_count ();
      target_resources_ok = 
	TARGET_CAN_USE_HARDWARE_WATCHPOINT (bp_hardware_breakpoint, 
					    i + 1, 0);
      if (target_resources_ok == 0)
	error (_("No hardware breakpoint support in the target."));
      else if (target_resources_ok < 0)
	error (_("Hardware breakpoints used exceeds limit."));
    }
 
  if (bpt->type == bp_watchpoint || 
      bpt->type == bp_hardware_watchpoint ||
      bpt->type == bp_read_watchpoint || 
      bpt->type == bp_access_watchpoint)
    {
      struct frame_id saved_frame_id;
 
      saved_frame_id = get_frame_id (get_selected_frame (NULL));
      if (bpt->exp_valid_block != NULL)
	{
	  struct frame_info *fr =
	    fr = frame_find_by_id (bpt->watchpoint_frame);
	  if (fr == NULL)
	    {
	      printf_filtered (_("\
Cannot enable watchpoint %d because the block in which its expression\n\
is valid is not currently in scope.\n"), bpt->number);
	      return;
	    }
	  select_frame (fr);
	}
 
      if (bpt->val)
	value_free (bpt->val);
      mark = value_mark ();
      bpt->val = evaluate_expression (bpt->exp);
      release_value (bpt->val);
      if (value_lazy (bpt->val))
	value_fetch_lazy (bpt->val);
 
      if (bpt->type == bp_hardware_watchpoint ||
	  bpt->type == bp_read_watchpoint ||
	  bpt->type == bp_access_watchpoint)
	{
	  int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
	  int mem_cnt = can_use_hardware_watchpoint (bpt->val);
 
	  /* Hack around 'unused var' error for some targets here */
	  (void) mem_cnt, (void) i;
	  target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT (
								    bpt->type, i + mem_cnt, other_type_used);
	  /* we can consider of type is bp_hardware_watchpoint, convert to 
	     bp_watchpoint in the following condition */
	  if (target_resources_ok < 0)
	    {
	      printf_filtered (_("\
Cannot enable watchpoint %d because target watch resources\n\
have been allocated for other watchpoints.\n"), bpt->number);
	      value_free_to_mark (mark);
	      return;
	    }
	}
 
      select_frame (frame_find_by_id (saved_frame_id));
      value_free_to_mark (mark);
    }
 
  if (bpt->enable_state != bp_permanent)
    bpt->enable_state = bp_enabled;
  bpt->disposition = disposition;
  check_duplicates (bpt);
  breakpoints_changed ();
 
  if (deprecated_modify_breakpoint_hook)
    deprecated_modify_breakpoint_hook (bpt);
  breakpoint_modify_event (bpt->number);
}
 
 
void
enable_breakpoint (struct breakpoint *bpt)
{
  do_enable_breakpoint (bpt, bpt->disposition);
}
 
/* The enable command enables the specified breakpoints (or all defined
   breakpoints) so they once again become (or continue to be) effective
   in stopping the inferior.  */
 
static void
enable_command (char *args, int from_tty)
{
  struct breakpoint *bpt;
  if (args == 0)
    ALL_BREAKPOINTS (bpt)
      switch (bpt->type)
      {
      case bp_none:
	warning (_("attempted to enable apparently deleted breakpoint #%d?"),
		 bpt->number);
	continue;
      case bp_breakpoint:
      case bp_catch_load:
      case bp_catch_unload:
      case bp_catch_fork:
      case bp_catch_vfork:
      case bp_catch_exec:
      case bp_hardware_breakpoint:
      case bp_watchpoint:
      case bp_hardware_watchpoint:
      case bp_read_watchpoint:
      case bp_access_watchpoint:
	enable_breakpoint (bpt);
      default:
	continue;
      }
  else if (strchr (args, '.'))
    {
      struct bp_location *loc = find_location_by_number (args);
      if (loc)
	loc->enabled = 1;
      check_duplicates (loc->owner);
    }
  else
    map_breakpoint_numbers (args, enable_breakpoint);
}
 
static void
enable_once_breakpoint (struct breakpoint *bpt)
{
  do_enable_breakpoint (bpt, disp_disable);
}
 
static void
enable_once_command (char *args, int from_tty)
{
  map_breakpoint_numbers (args, enable_once_breakpoint);
}
 
static void
enable_delete_breakpoint (struct breakpoint *bpt)
{
  do_enable_breakpoint (bpt, disp_del);
}
 
static void
enable_delete_command (char *args, int from_tty)
{
  map_breakpoint_numbers (args, enable_delete_breakpoint);
}

static void
set_breakpoint_cmd (char *args, int from_tty)
{
}
 
static void
show_breakpoint_cmd (char *args, int from_tty)
{
}
 
/* Use default_breakpoint_'s, or nothing if they aren't valid.  */
 
struct symtabs_and_lines
decode_line_spec_1 (char *string, int funfirstline)
{
  struct symtabs_and_lines sals;
  if (string == 0)
    error (_("Empty line specification."));
  if (default_breakpoint_valid)
    sals = decode_line_1 (&string, funfirstline,
			  default_breakpoint_symtab,
			  default_breakpoint_line,
			  (char ***) NULL, NULL);
  else
    sals = decode_line_1 (&string, funfirstline,
			  (struct symtab *) NULL, 0, (char ***) NULL, NULL);
  if (*string)
    error (_("Junk at end of line specification: %s"), string);
  return sals;
}
 
/* Create and insert a raw software breakpoint at PC.  Return an
   identifier, which should be used to remove the breakpoint later.
   In general, places which call this should be using something on the
   breakpoint chain instead; this function should be eliminated
   someday.  */
 
void *
deprecated_insert_raw_breakpoint (CORE_ADDR pc)
{
  struct bp_target_info *bp_tgt;
 
  bp_tgt = xmalloc (sizeof (struct bp_target_info));
  memset (bp_tgt, 0, sizeof (struct bp_target_info));
 
  bp_tgt->placed_address = pc;
  if (target_insert_breakpoint (bp_tgt) != 0)
    {
      /* Could not insert the breakpoint.  */
      xfree (bp_tgt);
      return NULL;
    }
 
  return bp_tgt;
}
 
/* Remove a breakpoint BP inserted by deprecated_insert_raw_breakpoint.  */
 
int
deprecated_remove_raw_breakpoint (void *bp)
{
  struct bp_target_info *bp_tgt = bp;
  int ret;
 
  ret = target_remove_breakpoint (bp_tgt);
  xfree (bp_tgt);
 
  return ret;
}
 
/* One (or perhaps two) breakpoints used for software single stepping.  */
 
static void *single_step_breakpoints[2];
 
/* Create and insert a breakpoint for software single step.  */
 
void
insert_single_step_breakpoint (CORE_ADDR next_pc)
{
  void **bpt_p;
 
  if (single_step_breakpoints[0] == NULL)
    bpt_p = &single_step_breakpoints[0];
  else
    {
      gdb_assert (single_step_breakpoints[1] == NULL);
      bpt_p = &single_step_breakpoints[1];
    }
 
  /* NOTE drow/2006-04-11: A future improvement to this function would be
     to only create the breakpoints once, and actually put them on the
     breakpoint chain.  That would let us use set_raw_breakpoint.  We could
     adjust the addresses each time they were needed.  Doing this requires
     corresponding changes elsewhere where single step breakpoints are
     handled, however.  So, for now, we use this.  */
 
  *bpt_p = deprecated_insert_raw_breakpoint (next_pc);
  if (*bpt_p == NULL)
    error (_("Could not insert single-step breakpoint at 0x%s"),
	     paddr_nz (next_pc));
}
 
/* Remove and delete any breakpoints used for software single step.  */
 
void
remove_single_step_breakpoints (void)
{
  gdb_assert (single_step_breakpoints[0] != NULL);
 
  /* See insert_single_step_breakpoint for more about this deprecated
     call.  */
  deprecated_remove_raw_breakpoint (single_step_breakpoints[0]);
  single_step_breakpoints[0] = NULL;
 
  if (single_step_breakpoints[1] != NULL)
    {
      deprecated_remove_raw_breakpoint (single_step_breakpoints[1]);
      single_step_breakpoints[1] = NULL;
    }
}
 
/* Check whether a software single-step breakpoint is inserted at PC.  */
 
static int
single_step_breakpoint_inserted_here_p (CORE_ADDR pc)
{
  int i;
 
  for (i = 0; i < 2; i++)
    {
      struct bp_target_info *bp_tgt = single_step_breakpoints[i];
      if (bp_tgt && bp_tgt->placed_address == pc)
	return 1;
    }
 
  return 0;
}
 

/* This help string is used for the break, hbreak, tbreak and thbreak commands.
   It is defined as a macro to prevent duplication.
   COMMAND should be a string constant containing the name of the command.  */
#define BREAK_ARGS_HELP(command) \
command" [LOCATION] [thread THREADNUM] [if CONDITION]\n\
LOCATION may be a line number, function name, or \"*\" and an address.\n\
If a line number is specified, break at start of code for that line.\n\
If a function is specified, break at start of code for that function.\n\
If an address is specified, break at that exact address.\n\
With no LOCATION, uses current execution address of selected stack frame.\n\
This is useful for breaking on return to a stack frame.\n\
\n\
THREADNUM is the number from \"info threads\".\n\
CONDITION is a boolean expression.\n\
\n\
Multiple breakpoints at one place are permitted, and useful if conditional.\n\
\n\
Do \"help breakpoints\" for info on other commands dealing with breakpoints."
 
void
_initialize_breakpoint (void)
{
  static struct cmd_list_element *breakpoint_set_cmdlist;
  static struct cmd_list_element *breakpoint_show_cmdlist;
  struct cmd_list_element *c;
 
  observer_attach_solib_unloaded (disable_breakpoints_in_unloaded_shlib);
 
  breakpoint_chain = 0;
  /* Don't bother to call set_breakpoint_count.  $bpnum isn't useful
     before a breakpoint is set.  */
  breakpoint_count = 0;
 
  add_com ("ignore", class_breakpoint, ignore_command, _("\
Set ignore-count of breakpoint number N to COUNT.\n\
Usage is `ignore N COUNT'."));
  if (xdb_commands)
    add_com_alias ("bc", "ignore", class_breakpoint, 1);
 
  add_com ("commands", class_breakpoint, commands_command, _("\
Set commands to be executed when a breakpoint is hit.\n\
Give breakpoint number as argument after \"commands\".\n\
With no argument, the targeted breakpoint is the last one set.\n\
The commands themselves follow starting on the next line.\n\
Type a line containing \"end\" to indicate the end of them.\n\
Give \"silent\" as the first line to make the breakpoint silent;\n\
then no output is printed when it is hit, except what the commands print."));
 
  add_com ("condition", class_breakpoint, condition_command, _("\
Specify breakpoint number N to break only if COND is true.\n\
Usage is `condition N COND', where N is an integer and COND is an\n\
expression to be evaluated whenever breakpoint N is reached."));
 
  c = add_com ("tbreak", class_breakpoint, tbreak_command, _("\
Set a temporary breakpoint.\n\
Like \"break\" except the breakpoint is only temporary,\n\
so it will be deleted when hit.  Equivalent to \"break\" followed\n\
by using \"enable delete\" on the breakpoint number.\n\
\n"
BREAK_ARGS_HELP ("tbreak")));
  set_cmd_completer (c, location_completer);
 
  c = add_com ("hbreak", class_breakpoint, hbreak_command, _("\
Set a hardware assisted  breakpoint.\n\
Like \"break\" except the breakpoint requires hardware support,\n\
some target hardware may not have this support.\n\
\n"
BREAK_ARGS_HELP ("hbreak")));
  set_cmd_completer (c, location_completer);
 
  c = add_com ("thbreak", class_breakpoint, thbreak_command, _("\
Set a temporary hardware assisted breakpoint.\n\
Like \"hbreak\" except the breakpoint is only temporary,\n\
so it will be deleted when hit.\n\
\n"
BREAK_ARGS_HELP ("thbreak")));
  set_cmd_completer (c, location_completer);
 
  add_prefix_cmd ("enable", class_breakpoint, enable_command, _("\
Enable some breakpoints.\n\
Give breakpoint numbers (separated by spaces) as arguments.\n\
With no subcommand, breakpoints are enabled until you command otherwise.\n\
This is used to cancel the effect of the \"disable\" command.\n\
With a subcommand you can enable temporarily."),
		  &enablelist, "enable ", 1, &cmdlist);
  if (xdb_commands)
    add_com ("ab", class_breakpoint, enable_command, _("\
Enable some breakpoints.\n\
Give breakpoint numbers (separated by spaces) as arguments.\n\
With no subcommand, breakpoints are enabled until you command otherwise.\n\
This is used to cancel the effect of the \"disable\" command.\n\
With a subcommand you can enable temporarily."));
 
  add_com_alias ("en", "enable", class_breakpoint, 1);
 
  add_abbrev_prefix_cmd ("breakpoints", class_breakpoint, enable_command, _("\
Enable some breakpoints.\n\
Give breakpoint numbers (separated by spaces) as arguments.\n\
This is used to cancel the effect of the \"disable\" command.\n\
May be abbreviated to simply \"enable\".\n"),
		   &enablebreaklist, "enable breakpoints ", 1, &enablelist);
 
  add_cmd ("once", no_class, enable_once_command, _("\
Enable breakpoints for one hit.  Give breakpoint numbers.\n\
If a breakpoint is hit while enabled in this fashion, it becomes disabled."),
	   &enablebreaklist);
 
  add_cmd ("delete", no_class, enable_delete_command, _("\
Enable breakpoints and delete when hit.  Give breakpoint numbers.\n\
If a breakpoint is hit while enabled in this fashion, it is deleted."),
	   &enablebreaklist);
 
  add_cmd ("delete", no_class, enable_delete_command, _("\
Enable breakpoints and delete when hit.  Give breakpoint numbers.\n\
If a breakpoint is hit while enabled in this fashion, it is deleted."),
	   &enablelist);
 
  add_cmd ("once", no_class, enable_once_command, _("\
Enable breakpoints for one hit.  Give breakpoint numbers.\n\
If a breakpoint is hit while enabled in this fashion, it becomes disabled."),
	   &enablelist);
 
  add_prefix_cmd ("disable", class_breakpoint, disable_command, _("\
Disable some breakpoints.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To disable all breakpoints, give no argument.\n\
A disabled breakpoint is not forgotten, but has no effect until reenabled."),
		  &disablelist, "disable ", 1, &cmdlist);
  add_com_alias ("dis", "disable", class_breakpoint, 1);
  add_com_alias ("disa", "disable", class_breakpoint, 1);
  if (xdb_commands)
    add_com ("sb", class_breakpoint, disable_command, _("\
Disable some breakpoints.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To disable all breakpoints, give no argument.\n\
A disabled breakpoint is not forgotten, but has no effect until reenabled."));
 
  add_cmd ("breakpoints", class_alias, disable_command, _("\
Disable some breakpoints.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To disable all breakpoints, give no argument.\n\
A disabled breakpoint is not forgotten, but has no effect until reenabled.\n\
This command may be abbreviated \"disable\"."),
	   &disablelist);
 
  add_prefix_cmd ("delete", class_breakpoint, delete_command, _("\
Delete some breakpoints or auto-display expressions.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To delete all breakpoints, give no argument.\n\
\n\
Also a prefix command for deletion of other GDB objects.\n\
The \"unset\" command is also an alias for \"delete\"."),
		  &deletelist, "delete ", 1, &cmdlist);
  add_com_alias ("d", "delete", class_breakpoint, 1);
  add_com_alias ("del", "delete", class_breakpoint, 1);
  if (xdb_commands)
    add_com ("db", class_breakpoint, delete_command, _("\
Delete some breakpoints.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To delete all breakpoints, give no argument.\n"));
 
  add_cmd ("breakpoints", class_alias, delete_command, _("\
Delete some breakpoints or auto-display expressions.\n\
Arguments are breakpoint numbers with spaces in between.\n\
To delete all breakpoints, give no argument.\n\
This command may be abbreviated \"delete\"."),
	   &deletelist);
 
  add_com ("clear", class_breakpoint, clear_command, _("\
Clear breakpoint at specified line or function.\n\
Argument may be line number, function name, or \"*\" and an address.\n\
If line number is specified, all breakpoints in that line are cleared.\n\
If function is specified, breakpoints at beginning of function are cleared.\n\
If an address is specified, breakpoints at that address are cleared.\n\
\n\
With no argument, clears all breakpoints in the line that the selected frame\n\
is executing in.\n\
\n\
See also the \"delete\" command which clears breakpoints by number."));
 
  c = add_com ("break", class_breakpoint, break_command, _("\
Set breakpoint at specified line or function.\n"
BREAK_ARGS_HELP ("break")));
  set_cmd_completer (c, location_completer);
 
  add_com_alias ("b", "break", class_run, 1);
  add_com_alias ("br", "break", class_run, 1);
  add_com_alias ("bre", "break", class_run, 1);
  add_com_alias ("brea", "break", class_run, 1);
 
 if (xdb_commands)
    {
      add_com_alias ("ba", "break", class_breakpoint, 1);
      add_com_alias ("bu", "ubreak", class_breakpoint, 1);
    }
 
  if (dbx_commands)
    {
      add_abbrev_prefix_cmd ("stop", class_breakpoint, stop_command, _("\
Break in function/address or break at a line in the current file."),
			     &stoplist, "stop ", 1, &cmdlist);
      add_cmd ("in", class_breakpoint, stopin_command,
	       _("Break in function or address."), &stoplist);
      add_cmd ("at", class_breakpoint, stopat_command,
	       _("Break at a line in the current file."), &stoplist);
      add_com ("status", class_info, breakpoints_info, _("\
Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint     - normal breakpoint\n\
\twatchpoint     - watchpoint\n\
The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit.  \"dis\" means that the\n\
breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate the\n\
address and file/line number respectively.\n\
\n\
Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed unless the command\n\
is prefixed with \"server \".\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
breakpoint set."));
    }
 
  add_info ("breakpoints", breakpoints_info, _("\
Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint     - normal breakpoint\n\
\twatchpoint     - watchpoint\n\
The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit.  \"dis\" means that the\n\
breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate the\n\
address and file/line number respectively.\n\
\n\
Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed unless the command\n\
is prefixed with \"server \".\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
breakpoint set."));
 
  if (xdb_commands)
    add_com ("lb", class_breakpoint, breakpoints_info, _("\
Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint     - normal breakpoint\n\
\twatchpoint     - watchpoint\n\
The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit.  \"dis\" means that the\n\
breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate the\n\
address and file/line number respectively.\n\
\n\
Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed unless the command\n\
is prefixed with \"server \".\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
breakpoint set."));
 
  add_cmd ("breakpoints", class_maintenance, maintenance_info_breakpoints, _("\
Status of all breakpoints, or breakpoint number NUMBER.\n\
The \"Type\" column indicates one of:\n\
\tbreakpoint     - normal breakpoint\n\
\twatchpoint     - watchpoint\n\
\tlongjmp        - internal breakpoint used to step through longjmp()\n\
\tlongjmp resume - internal breakpoint at the target of longjmp()\n\
\tuntil          - internal breakpoint used by the \"until\" command\n\
\tfinish         - internal breakpoint used by the \"finish\" command\n\
The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
the disposition of the breakpoint after it gets hit.  \"dis\" means that the\n\
breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate the\n\
address and file/line number respectively.\n\
\n\
Convenience variable \"$_\" and default examine address for \"x\"\n\
are set to the address of the last breakpoint listed unless the command\n\
is prefixed with \"server \".\n\n\
Convenience variable \"$bpnum\" contains the number of the last\n\
breakpoint set."),
	   &maintenanceinfolist);
 
  add_com ("catch", class_breakpoint, catch_command, _("\
Set catchpoints to catch events.\n\
Raised signals may be caught:\n\
\tcatch signal              - all signals\n\
\tcatch signal <signame>    - a particular signal\n\
Raised exceptions may be caught:\n\
\tcatch throw               - all exceptions, when thrown\n\
\tcatch throw <exceptname>  - a particular exception, when thrown\n\
\tcatch catch               - all exceptions, when caught\n\
\tcatch catch <exceptname>  - a particular exception, when caught\n\
Thread or process events may be caught:\n\
\tcatch thread_start        - any threads, just after creation\n\
\tcatch thread_exit         - any threads, just before expiration\n\
\tcatch thread_join         - any threads, just after joins\n\
Process events may be caught:\n\
\tcatch start               - any processes, just after creation\n\
\tcatch exit                - any processes, just before expiration\n\
\tcatch fork                - calls to fork()\n\
\tcatch vfork               - calls to vfork()\n\
\tcatch exec                - calls to exec()\n\
Dynamically-linked library events may be caught:\n\
\tcatch load                - loads of any library\n\
\tcatch load <libname>      - loads of a particular library\n\
\tcatch unload              - unloads of any library\n\
\tcatch unload <libname>    - unloads of a particular library\n\
The act of your program's execution stopping may also be caught:\n\
\tcatch stop\n\n\
C++ exceptions may be caught:\n\
\tcatch throw               - all exceptions, when thrown\n\
\tcatch catch               - all exceptions, when caught\n\
Ada exceptions may be caught:\n\
\tcatch exception           - all exceptions, when raised\n\
\tcatch exception <name>    - a particular exception, when raised\n\
\tcatch exception unhandled - all unhandled exceptions, when raised\n\
\tcatch assert              - all failed assertions, when raised\n\
\n\
Do \"help set follow-fork-mode\" for info on debugging your program\n\
after a fork or vfork is caught.\n\n\
Do \"help breakpoints\" for info on other commands dealing with breakpoints."));
 
  add_com ("tcatch", class_breakpoint, tcatch_command, _("\
Set temporary catchpoints to catch events.\n\
Args like \"catch\" command.\n\
Like \"catch\" except the catchpoint is only temporary,\n\
so it will be deleted when hit.  Equivalent to \"catch\" followed\n\
by using \"enable delete\" on the catchpoint number."));
 
  c = add_com ("watch", class_breakpoint, watch_command, _("\
Set a watchpoint for an expression.\n\
A watchpoint stops execution of your program whenever the value of\n\
an expression changes."));
  set_cmd_completer (c, location_completer);
 
  c = add_com ("rwatch", class_breakpoint, rwatch_command, _("\
Set a read watchpoint for an expression.\n\
A watchpoint stops execution of your program whenever the value of\n\
an expression is read."));
  set_cmd_completer (c, location_completer);
 
  c = add_com ("awatch", class_breakpoint, awatch_command, _("\
Set a watchpoint for an expression.\n\
A watchpoint stops execution of your program whenever the value of\n\
an expression is either read or written."));
  set_cmd_completer (c, location_completer);
 
  add_info ("watchpoints", breakpoints_info,
	    _("Synonym for ``info breakpoints''."));
 
 
  /* XXX: cagney/2005-02-23: This should be a boolean, and should
     respond to changes - contrary to the description.  */
  add_setshow_zinteger_cmd ("can-use-hw-watchpoints", class_support,
			    &can_use_hw_watchpoints, _("\
Set debugger's willingness to use watchpoint hardware."), _("\
Show debugger's willingness to use watchpoint hardware."), _("\
If zero, gdb will not use hardware for new watchpoints, even if\n\
such is available.  (However, any hardware watchpoints that were\n\
created before setting this to nonzero, will continue to use watchpoint\n\
hardware.)"),
			    NULL,
			    show_can_use_hw_watchpoints,
			    &setlist, &showlist);
 
  can_use_hw_watchpoints = 1;
 
  add_prefix_cmd ("breakpoint", class_maintenance, set_breakpoint_cmd, _("\
Breakpoint specific settings\n\
Configure various breakpoint-specific variables such as\n\
pending breakpoint behavior"),
		  &breakpoint_set_cmdlist, "set breakpoint ",
		  0/*allow-unknown*/, &setlist);
  add_prefix_cmd ("breakpoint", class_maintenance, show_breakpoint_cmd, _("\
Breakpoint specific settings\n\
Configure various breakpoint-specific variables such as\n\
pending breakpoint behavior"),
		  &breakpoint_show_cmdlist, "show breakpoint ",
		  0/*allow-unknown*/, &showlist);
 
  add_setshow_auto_boolean_cmd ("pending", no_class,
				&pending_break_support, _("\
Set debugger's behavior regarding pending breakpoints."), _("\
Show debugger's behavior regarding pending breakpoints."), _("\
If on, an unrecognized breakpoint location will cause gdb to create a\n\
pending breakpoint.  If off, an unrecognized breakpoint location results in\n\
an error.  If auto, an unrecognized breakpoint location results in a\n\
user-query to see if a pending breakpoint should be created."),
				NULL,
				show_pending_break_support,
				&breakpoint_set_cmdlist,
				&breakpoint_show_cmdlist);
 
  pending_break_support = AUTO_BOOLEAN_AUTO;
 
  add_setshow_boolean_cmd ("auto-hw", no_class,
			   &automatic_hardware_breakpoints, _("\
Set automatic usage of hardware breakpoints."), _("\
Show automatic usage of hardware breakpoints."), _("\
If set, the debugger will automatically use hardware breakpoints for\n\
breakpoints set with \"break\" but falling in read-only memory.  If not set,\n\
a warning will be emitted for such breakpoints."),
			   NULL,
			   show_automatic_hardware_breakpoints,
			   &breakpoint_set_cmdlist,
			   &breakpoint_show_cmdlist);
 
  automatic_hardware_breakpoints = 1;
}
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.