URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [gdb-6.8/] [gdb/] [i386bsd-nat.c] - Rev 840
Compare with Previous | Blame | View Log
/* Native-dependent code for modern i386 BSD's. Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2007, 2008 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "defs.h" #include "inferior.h" #include "regcache.h" #include "gdb_assert.h" #include <signal.h> #include <stddef.h> #include <sys/types.h> #include <sys/ptrace.h> #include <machine/reg.h> #include <machine/frame.h> #include "i386-tdep.h" #include "i387-tdep.h" #include "i386bsd-nat.h" #include "inf-ptrace.h" /* In older BSD versions we cannot get at some of the segment registers. FreeBSD for example didn't support the %fs and %gs registers until the 3.0 release. We have autoconf checks for their presence, and deal gracefully with their absence. */ /* Offset in `struct reg' where MEMBER is stored. */ #define REG_OFFSET(member) offsetof (struct reg, member) /* At i386bsd_reg_offset[REGNUM] you'll find the offset in `struct reg' where the GDB register REGNUM is stored. Unsupported registers are marked with `-1'. */ static int i386bsd_r_reg_offset[] = { REG_OFFSET (r_eax), REG_OFFSET (r_ecx), REG_OFFSET (r_edx), REG_OFFSET (r_ebx), REG_OFFSET (r_esp), REG_OFFSET (r_ebp), REG_OFFSET (r_esi), REG_OFFSET (r_edi), REG_OFFSET (r_eip), REG_OFFSET (r_eflags), REG_OFFSET (r_cs), REG_OFFSET (r_ss), REG_OFFSET (r_ds), REG_OFFSET (r_es), #ifdef HAVE_STRUCT_REG_R_FS REG_OFFSET (r_fs), #else -1, #endif #ifdef HAVE_STRUCT_REG_R_GS REG_OFFSET (r_gs) #else -1 #endif }; /* Macro to determine if a register is fetched with PT_GETREGS. */ #define GETREGS_SUPPLIES(regnum) \ ((0 <= (regnum) && (regnum) <= 15)) #ifdef HAVE_PT_GETXMMREGS /* Set to 1 if the kernel supports PT_GETXMMREGS. Initialized to -1 so that we try PT_GETXMMREGS the first time around. */ static int have_ptrace_xmmregs = -1; #endif /* Supply the general-purpose registers in GREGS, to REGCACHE. */ static void i386bsd_supply_gregset (struct regcache *regcache, const void *gregs) { const char *regs = gregs; int regnum; for (regnum = 0; regnum < ARRAY_SIZE (i386bsd_r_reg_offset); regnum++) { int offset = i386bsd_r_reg_offset[regnum]; if (offset != -1) regcache_raw_supply (regcache, regnum, regs + offset); } } /* Collect register REGNUM from REGCACHE and store its contents in GREGS. If REGNUM is -1, collect and store all appropriate registers. */ static void i386bsd_collect_gregset (const struct regcache *regcache, void *gregs, int regnum) { char *regs = gregs; int i; for (i = 0; i < ARRAY_SIZE (i386bsd_r_reg_offset); i++) { if (regnum == -1 || regnum == i) { int offset = i386bsd_r_reg_offset[i]; if (offset != -1) regcache_raw_collect (regcache, i, regs + offset); } } } /* Fetch register REGNUM from the inferior. If REGNUM is -1, do this for all registers (including the floating point registers). */ static void i386bsd_fetch_inferior_registers (struct regcache *regcache, int regnum) { if (regnum == -1 || GETREGS_SUPPLIES (regnum)) { struct reg regs; if (ptrace (PT_GETREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) ®s, 0) == -1) perror_with_name (_("Couldn't get registers")); i386bsd_supply_gregset (regcache, ®s); if (regnum != -1) return; } if (regnum == -1 || regnum >= I386_ST0_REGNUM) { struct fpreg fpregs; #ifdef HAVE_PT_GETXMMREGS char xmmregs[512]; if (have_ptrace_xmmregs != 0 && ptrace(PT_GETXMMREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) xmmregs, 0) == 0) { have_ptrace_xmmregs = 1; i387_supply_fxsave (regcache, -1, xmmregs); } else { if (ptrace (PT_GETFPREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) &fpregs, 0) == -1) perror_with_name (_("Couldn't get floating point status")); i387_supply_fsave (regcache, -1, &fpregs); } #else if (ptrace (PT_GETFPREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) &fpregs, 0) == -1) perror_with_name (_("Couldn't get floating point status")); i387_supply_fsave (regcache, -1, &fpregs); #endif } } /* Store register REGNUM back into the inferior. If REGNUM is -1, do this for all registers (including the floating point registers). */ static void i386bsd_store_inferior_registers (struct regcache *regcache, int regnum) { if (regnum == -1 || GETREGS_SUPPLIES (regnum)) { struct reg regs; if (ptrace (PT_GETREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) ®s, 0) == -1) perror_with_name (_("Couldn't get registers")); i386bsd_collect_gregset (regcache, ®s, regnum); if (ptrace (PT_SETREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) ®s, 0) == -1) perror_with_name (_("Couldn't write registers")); if (regnum != -1) return; } if (regnum == -1 || regnum >= I386_ST0_REGNUM) { struct fpreg fpregs; #ifdef HAVE_PT_GETXMMREGS char xmmregs[512]; if (have_ptrace_xmmregs != 0 && ptrace(PT_GETXMMREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) xmmregs, 0) == 0) { have_ptrace_xmmregs = 1; i387_collect_fxsave (regcache, regnum, xmmregs); if (ptrace (PT_SETXMMREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) xmmregs, 0) == -1) perror_with_name (_("Couldn't write XMM registers")); } else { have_ptrace_xmmregs = 0; #endif if (ptrace (PT_GETFPREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) &fpregs, 0) == -1) perror_with_name (_("Couldn't get floating point status")); i387_collect_fsave (regcache, regnum, &fpregs); if (ptrace (PT_SETFPREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) &fpregs, 0) == -1) perror_with_name (_("Couldn't write floating point status")); #ifdef HAVE_PT_GETXMMREGS } #endif } } /* Create a prototype *BSD/i386 target. The client can override it with local methods. */ struct target_ops * i386bsd_target (void) { struct target_ops *t; t = inf_ptrace_target (); t->to_fetch_registers = i386bsd_fetch_inferior_registers; t->to_store_registers = i386bsd_store_inferior_registers; return t; } /* Support for debug registers. */ #ifdef HAVE_PT_GETDBREGS /* Not all versions of FreeBSD/i386 that support the debug registers have this macro. */ #ifndef DBREG_DRX #define DBREG_DRX(d, x) ((&d->dr0)[x]) #endif static void i386bsd_dr_set (int regnum, unsigned int value) { struct dbreg dbregs; if (ptrace (PT_GETDBREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) &dbregs, 0) == -1) perror_with_name (_("Couldn't get debug registers")); /* For some mysterious reason, some of the reserved bits in the debug control register get set. Mask these off, otherwise the ptrace call below will fail. */ DBREG_DRX ((&dbregs), 7) &= ~(0x0000fc00); DBREG_DRX ((&dbregs), regnum) = value; if (ptrace (PT_SETDBREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) &dbregs, 0) == -1) perror_with_name (_("Couldn't write debug registers")); } void i386bsd_dr_set_control (unsigned long control) { i386bsd_dr_set (7, control); } void i386bsd_dr_set_addr (int regnum, CORE_ADDR addr) { gdb_assert (regnum >= 0 && regnum <= 4); i386bsd_dr_set (regnum, addr); } void i386bsd_dr_reset_addr (int regnum) { gdb_assert (regnum >= 0 && regnum <= 4); i386bsd_dr_set (regnum, 0); } unsigned long i386bsd_dr_get_status (void) { struct dbreg dbregs; /* FIXME: kettenis/2001-03-31: Calling perror_with_name if the ptrace call fails breaks debugging remote targets. The correct way to fix this is to add the hardware breakpoint and watchpoint stuff to the target vector. For now, just return zero if the ptrace call fails. */ if (ptrace (PT_GETDBREGS, PIDGET (inferior_ptid), (PTRACE_TYPE_ARG3) &dbregs, 0) == -1) #if 0 perror_with_name (_("Couldn't read debug registers")); #else return 0; #endif return DBREG_DRX ((&dbregs), 6); } #endif /* PT_GETDBREGS */ void _initialize_i386bsd_nat (void) { int offset; /* To support the recognition of signal handlers, i386bsd-tdep.c hardcodes some constants. Inclusion of this file means that we are compiling a native debugger, which means that we can use the system header files and sysctl(3) to get at the relevant information. */ #if defined (__FreeBSD_version) && __FreeBSD_version >= 400011 #define SC_REG_OFFSET i386fbsd4_sc_reg_offset #elif defined (__FreeBSD_version) && __FreeBSD_version >= 300005 #define SC_REG_OFFSET i386fbsd_sc_reg_offset #elif defined (NetBSD) || defined (__NetBSD_Version__) #define SC_REG_OFFSET i386nbsd_sc_reg_offset #elif defined (OpenBSD) #define SC_REG_OFFSET i386obsd_sc_reg_offset #endif #ifdef SC_REG_OFFSET /* We only check the program counter, stack pointer and frame pointer since these members of `struct sigcontext' are essential for providing backtraces. More checks could be added, but would involve adding configure checks for the appropriate structure members, since older BSD's don't provide all of them. */ #define SC_PC_OFFSET SC_REG_OFFSET[I386_EIP_REGNUM] #define SC_SP_OFFSET SC_REG_OFFSET[I386_ESP_REGNUM] #define SC_FP_OFFSET SC_REG_OFFSET[I386_EBP_REGNUM] /* Override the default value for the offset of the program counter in the sigcontext structure. */ offset = offsetof (struct sigcontext, sc_pc); if (SC_PC_OFFSET != offset) { warning (_("\ offsetof (struct sigcontext, sc_pc) yields %d instead of %d.\n\ Please report this to <bug-gdb@gnu.org>."), offset, SC_PC_OFFSET); } SC_PC_OFFSET = offset; /* Likewise for the stack pointer. */ offset = offsetof (struct sigcontext, sc_sp); if (SC_SP_OFFSET != offset) { warning (_("\ offsetof (struct sigcontext, sc_sp) yields %d instead of %d.\n\ Please report this to <bug-gdb@gnu.org>."), offset, SC_SP_OFFSET); } SC_SP_OFFSET = offset; /* And the frame pointer. */ offset = offsetof (struct sigcontext, sc_fp); if (SC_FP_OFFSET != offset) { warning (_("\ offsetof (struct sigcontext, sc_fp) yields %d instead of %d.\n\ Please report this to <bug-gdb@gnu.org>."), offset, SC_FP_OFFSET); } SC_FP_OFFSET = offset; #endif /* SC_REG_OFFSET */ }