Subversion Repositories openrisc

# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2007, 2008
# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu

# This file was written by Fred Fish. (fnf@cygnus.com)

if $tracelevel then {
        strace $tracelevel
}

set prms_id 0
set bug_id 0

# are we on a target board
if ![isnative] then {
    return
}

set testfile "coremaker"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
     untested corefile.exp
     return -1
}

# Create and source the file that provides information about the compiler
# used to compile the test case.
if [get_compiler_info ${binfile}] {
    return -1;
}

# Create a core file named "corefile" rather than just "core", to
# avoid problems with sys admin types that like to regularly prune all
# files named "core" from the system.
#
# Arbitrarily try setting the core size limit to "unlimited" since
# this does not hurt on systems where the command does not work and
# allows us to generate a core on systems where it does.
#
# Some systems append "core" to the name of the program; others append
# the name of the program to "core"; still others (like Linux, as of
# May 2003) create cores named "core.PID".  In the latter case, we
# could have many core files lying around, and it may be difficult to
# tell which one is ours, so let's run the program in a subdirectory.
set found 0
set coredir "${objdir}/${subdir}/coredir.[getpid]"
file mkdir $coredir
catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile}; true) >/dev/null 2>&1\""
#      remote_exec host "${binfile}"
foreach i "${coredir}/core ${coredir}/core.coremaker.c ${binfile}.core" {
    if [remote_file build exists $i] {
        remote_exec build "mv $i ${objdir}/${subdir}/corefile"
        set found 1
    }
}
# Check for "core.PID".
if { $found == 0 } {
    set names [glob -nocomplain -directory $coredir core.*]
    if {[llength $names] == 1} {
        set corefile [file join $coredir [lindex $names 0]]
        remote_exec build "mv $corefile ${objdir}/${subdir}/corefile"
        set found 1
    }
}
if { $found == 0 } {
    # The braindamaged HPUX shell quits after the ulimit -c above
    # without executing ${binfile}.  So we try again without the
    # ulimit here if we didn't find a core file above.
    # Oh, I should mention that any "braindamaged" non-Unix system has
    # the same problem. I like the cd bit too, it's really neat'n stuff.
    catch "system \"(cd ${objdir}/${subdir}; ${binfile}; true) >/dev/null 2>&1\""
    foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" {
        if [remote_file build exists $i] {
            remote_exec build "mv $i ${objdir}/${subdir}/corefile"
            set found 1
        }
    }
}

# Try to clean up after ourselves. 
remote_file build delete [file join $coredir coremmap.data]
remote_exec build "rmdir $coredir"
    
if { $found == 0  } {
    warning "can't generate a core file - core tests suppressed - check ulimit -c"
    return 0
}

#
# Test that we can simply startup with a "-core=corefile" command line arg
# and recognize that the core file is a valid, usable core file.
# To do this, we must shutdown the currently running gdb and restart
# with the -core args.  We can't use gdb_start because it looks for
# the first gdb prompt, and the message we are looking for occurs
# before the first prompt.  Also, we can't include GDBFLAGS because
# if it is empty, this confuses gdb with an empty argument that it
# grumbles about (said grumbling currently being ignored in gdb_start).
# **FIXME**
#
# Another problem is that on some systems (solaris for example), there
# is apparently a limit on the length of a fully specified path to 
# the coremaker executable, at about 80 chars.  For this case, consider
# it a pass, but note that the program name is bad.

gdb_exit
if $verbose>1 then {
    send_user "Spawning $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile\n"
}

set oldtimeout $timeout
set timeout [expr "$timeout + 60"]
verbose "Timeout is now $timeout seconds" 2
eval "spawn $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile"
expect {
    -re "Couldn't find .* registers in core file.*$gdb_prompt $" {
        fail "args: -core=corefile (couldn't find regs)"
    }
    -re "Core was generated by .*coremaker.*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
        pass "args: -core=corefile"
    }
    -re "Core was generated by .*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
        pass "args: -core=corefile (with bad program name)"
    }
    -re ".*registers from core file: File in wrong format.* $" {
        fail "args: -core=corefile (could not read registers from core file)"
    }
    -re ".*$gdb_prompt $"       { fail "args: -core=corefile" }
    timeout             { fail "(timeout) starting with -core" }
}


#
# Test that startup with both an executable file and -core argument.
# See previous comments above, they are still applicable.
#

close;

if $verbose>1 then {
    send_user "Spawning $GDB -nw $GDBFLAGS $binfile -core=$objdir/$subdir/corefile\n"
}


eval "spawn $GDB -nw $GDBFLAGS $binfile -core=$objdir/$subdir/corefile";
expect {
    -re "Core was generated by .*coremaker.*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
        pass "args: execfile -core=corefile"
    }
    -re "Core was generated by .*\r\n\#0  .*\(\).*\r\n$gdb_prompt $"     {
        pass "args: execfile -core=corefile (with bad program name)"
    }
    -re ".*registers from core file: File in wrong format.* $" {
        fail "args: execfile -core=corefile (could not read registers from core file)"
    }
    -re ".*$gdb_prompt $"       { fail "args: execfile -core=corefile" }
    timeout             { fail "(timeout) starting with -core" }
}
set timeout $oldtimeout
verbose "Timeout is now $timeout seconds" 2

close;

# Now restart normally.

gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}

# Test basic corefile recognition via core-file command.

send_gdb "core-file $objdir/$subdir/corefile\n"
gdb_expect {
    -re ".* program is being debugged already.*y or n. $" {
        # gdb_load may connect us to a gdbserver.
        send_gdb "y\n"
        exp_continue;
    }
    -re "Core was generated by .*coremaker.*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
        pass "core-file command"
    }
    -re "Core was generated by .*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
        pass "core-file command (with bad program name)"
    }
    -re ".*registers from core file: File in wrong format.* $" {
        fail "core-file command (could not read registers from core file)"
    }
    -re ".*$gdb_prompt $"       { fail "core-file command" }
    timeout             { fail "(timeout) core-file command" }
}

# Test correct mapping of corefile sections by printing some variables.

gdb_test "print coremaker_data" "\\\$$decimal = 202"
gdb_test "print coremaker_bss" "\\\$$decimal = 10"
gdb_test "print coremaker_ro" "\\\$$decimal = 201"

gdb_test "print func2::coremaker_local" "\\\$$decimal = \\{0, 1, 2, 3, 4\\}"

# Somehow we better test the ability to read the registers out of the core
# file correctly.  I don't think the other tests do this.

gdb_test "bt" "abort.*func2.*func1.*main.*" "backtrace in corefile.exp"
gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(.*\\).*" "up in corefile.exp"

# Test ability to read mmap'd data

gdb_test "x/8bd buf1" ".*:.*0.*1.*2.*3.*4.*5.*6.*7" "accessing original mmap data in core file"
setup_xfail "*-*-sunos*" "*-*-ultrix*" "*-*-aix*"
set test "accessing mmapped data in core file"
gdb_test_multiple "x/8bd buf2" "$test" {
    -re ".*:.*0.*1.*2.*3.*4.*5.*6.*7.*$gdb_prompt $" {
        pass "$test"
    }
    -re "0x\[f\]*:.*Cannot access memory at address 0x\[f\]*.*$gdb_prompt $" {
        fail "$test (mapping failed at runtime)"
    }
    -re "0x.*:.*Cannot access memory at address 0x.*$gdb_prompt $" {
        fail "$test (mapping address not found in core file)"
    }
}

# test reinit_frame_cache

gdb_load ${binfile}
gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(.*\\).*" "up in corefile.exp (reinit)"

gdb_test "core" "No core file now."