Subversion Repositories openrisc

# This testcase is part of GDB, the GNU debugger.

# Copyright 2004, 2005, 2007, 2008 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Check that GDB can trigger and backtrace SIGSEGV signal stacks
# caused by both accessing (data) and executing (code) at address
# zero.

# On function descriptor architectures, a zero descriptor, instead of
# a NULL pointer, is used.  That way the NULL code test always
# contains a zero code reference.

# For recovery, sigjmp/longjmp are used.

# This also tests backtrace/gdb1476.

if [target_info exists gdb,nosignals] {
    verbose "Skipping signull.exp because of nosignals."
    continue
}

if $tracelevel {
    strace $tracelevel
}

set prms_id 0
set bug_id 0

set testfile "signull"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
    untested signull.exp
    return -1
}

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}

#
# Run to `main' where we begin our tests.
#

if ![runto_main] then {
    gdb_suppress_tests
}

# If we can examine what's at memory address 0, it is possible that we
# could also execute it.  This could probably make us run away,
# executing random code, which could have all sorts of ill effects,
# especially on targets without an MMU.  Don't run the tests in that
# case.

send_gdb "x 0\n"
gdb_expect {
    -re "0x0:.*Cannot access memory at address 0x0.*$gdb_prompt $" { }
    -re "0x0:.*Error accessing memory address 0x0.*$gdb_prompt $" { }
    -re ".*$gdb_prompt $" {
        untested "Memory at address 0 is possibly executable"
        return
    }
}

# If an attempt to call a NULL pointer leaves the inferior in main,
# then function pointers are descriptors, probe this and remember the
# result.

gdb_test "set test = code_entry_point" "" "set for function pointer probe"
set test "probe function pointer"
set function_pointer code_entry_point
gdb_test_multiple "continue" "$test" {
    -re "Program received signal SIGSEGV.*bowler .*$gdb_prompt $" {
        set function_pointer code_descriptor
        pass "$test (function descriptor)"
    }
    -re "Program received signal SIGSEGV.*0.*$gdb_prompt $" {
        pass "$test (function entry-point)"
    }
}

# Re-start from scratch, breakpoint the bowler so that control is
# regained after each test, and run up to that.
rerun_to_main
gdb_test "break bowler"
gdb_test "break keeper"
# By default Stop:Yes Print:Yes Pass:Yes
gdb_test "handle SIGSEGV" "SIGSEGV.*Yes.*Yes.*Yes.*Segmentation fault"

# For the given signal type, check that: the SIGSEGV occures; a
# backtrace from the SEGV works; the sigsegv is delivered; a backtrace
# through the SEGV works.

proc test_segv { name tag bt_from_segv bt_from_keeper } {
    gdb_test continue "Breakpoint.* bowler.*" "${name}; start with the bowler"
    # NB: Don't use $tag in the testname - changes across systems.
    gdb_test "set test = $tag" "" "${name}; select the pointer type"
    gdb_test continue "Program received signal SIGSEGV.*" \
        "${name}; take the SIGSEGV"
    gdb_test backtrace $bt_from_segv "${name}; backtrace from SIGSEGV"
    gdb_test continue "Breakpoint.* keeper.*" "${name}; continue to the keeper"
    gdb_test backtrace $bt_from_keeper "${name}; backtrace from keeper through SIGSEGV"
}

test_segv "data read" data_read \
    {#0 .* bowler .*#1  .* main .*} \
    {#0 .* keeper .*#1  .* handler .*#2 .* bowler .*#3  .* main .*}
test_segv "data write" data_write \
    {#0 .* bowler .*#1  .* main .*} \
    {#0 .* keeper .*#1  .* handler .*#2 .* bowler .*#3  .* main .*}
test_segv code $function_pointer \
    {#0 .* 0x0+ .*#1 .* bowler .*#2  .* main .*} \
    {#0 .* keeper .*#1  .* handler .*#2 .* 0x0+ .*#3 .* bowler .*#4 .* main .*}