URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [gdb-6.8/] [gdb/] [testsuite/] [gdb.pascal/] [floats.exp] - Rev 827
Go to most recent revision | Compare with Previous | Blame | View Log
# Copyright 2007, 2008 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
if $tracelevel then {
strace $tracelevel
}
load_lib "pascal.exp"
set testfile "floats"
set srcfile ${testfile}.pas
set binfile ${objdir}/${subdir}/${testfile}$EXEEXT
if {[gdb_compile_pascal "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable [list debug ]] != "" } {
return -1
}
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
set bp_location2 [gdb_get_line_number "set breakpoint 2 here"]
if { [gdb_breakpoint ${srcfile}:${bp_location1}] } {
pass "setting breakpoint 1"
}
if { [gdb_breakpoint ${srcfile}:${bp_location2}] } {
pass "setting breakpoint 2"
}
# Verify that "start" lands inside the right procedure.
if { [gdb_start_cmd] < 0 } {
untested start
return -1
}
gdb_test "" ".* at .*${srcfile}.*" "start"
gdb_test "cont" "Breakpoint .*:${bp_location1}.*" "Going to first breakpoint"
gdb_test "print r" ".* = 0" "Print r before assigned to 1.25"
gdb_test "next" "r := 1\\.25;" "Next to 'r := 1.25' line"
gdb_test "next" "s := 2\\.2;" "Next to 's := 2.2' line"
gdb_test "next" "t := -3\\.2;" "Next to 't := -3.2' line"
gdb_test "next" "u := 78\\.3;" "Next to 'u := 78.3' line"
gdb_test "next" "l := 1;" "Next to 'l := 1' line"
gdb_test "next" "i := 1;" "Next to 'i := 1' line"
# At that point,
# r should be equal to 1.25
gdb_test "print r" " = 1\\.25"
# s should be equal to 2.2
gdb_test "print s" " = 2\\.(199.*|2|200.*)"
# t should be equal to -3.2
gdb_test "print t" " = -3\\.(199.*|2|200.*)"
# u should be equal to 78.3
gdb_test "print u" " = 78\\.(3|300.*|299.*)"
# Test addition
gdb_test "print r + s" " = 3\\.4(499.*|5|500.*)"
gdb_test "print r + t" " = -1\\.9(499.*|5|500.*)"
#Test addition with float constants
gdb_test "print r + 1.5" " = 2\\.7(499.*|5|500.*)"
gdb_test "print r + 0.03" " = 1\\.2(799.*|8|800.*)"
gdb_test "print r + (-0.2)" " = 1\\.0(499|5|500.*)"
gdb_test "print r + 1.5E+3" " = 1501\\.2(499.*|5|500.*)"
gdb_test "print r + 1.5E+2" " = 151\\.2(499.*|5|500.*)"
gdb_test "print r + 1.5E+1" " = 16\\.2(499|5|500.*)"
gdb_test "print r + 1.5E+0" " = 2\\.7(499.*|5|500.*)"
gdb_test "print r + 1.5E-1" " = 1\\.(399.*|4|400.*)"
gdb_test "print r + 1.5E-2" " = 1\\.26(499.*|5|500.*)"
gdb_test "print r + 1.5E-3" " = 1\\.251(499.*|5|500.*)"
# Test addition with integer variables
gdb_test "print r + l" " = 2\\.2(499.*|5|500.*)"
gdb_test "print l + t" " = -2\\.(199.*|2|200.*)"
# Test addition with integer constants
gdb_test "print r + 10" " = 11\\.2(499.*|5|500.*)"
gdb_test "print r + 5" " = 6\\.2(499.*|5|500.*)"
gdb_test "print r + 1" " = 2\\.2(499.*|5|500.*)"
gdb_test "print r + 0" " = 1\\.2(499|5|500.*)"
gdb_test "print r + (-1)" " = 0\\.2(499.*|5|500.*)"
gdb_test "print r + (-5)" " = -3\\.7(499.*|5|500.*)"
gdb_test "print r + (-10)" " = -8\\.7(499.*|5|500.*)"
# Test substraction
gdb_test "print r - s" " = -0\\.9(499.*|5|500.*)"
gdb_test "print r - t" " = 4\\.4(499.*|5|500.*)"
# Test unany minus
gdb_test "print -r" " = -1\\.2(499.*|5|500.*)"
gdb_test "print (-r)" " = -1\\.2(499.*|5|500.*)"
gdb_test "print -(r)" " = -1.2(499.*|5|500.*)"
gdb_test "print -(r + s)" " = -3\\.4(499.*|5|500.*)"
# Test multiplication
gdb_test "print 2 * r" " = 2\\.(499.*|5|500.*)"
gdb_test "print 2.0 * r" " = 2\\.(499.*|5|500.*)"
gdb_test "print 1000*r" " = 12(49\\.99.*|50|50\\.00.*)"
#Test division
gdb_test "print r / 2" " = 0\\.62(499.*|5|500.*)"
gdb_test "print 35 / 2" " = 17\\.(499.*|5|500.*)"
# 'set r' does not work, as there are set sub-commands starting with 'r'
# Thus we need to use 'set var r'
gdb_test "set var r := 2.56" " := 2\\.56"
gdb_test "print r" " = 2\\.56.*" "Testing new r value"
gdb_test "cont" \
"Breakpoint .*:${bp_location2}.*" \
"Going to second breakpoint"
gdb_test "next" "r := cos\\(u\\);" "Advance to 'r := cos(u)' line"
gdb_test "print u" " = 3\\.14159.*" "Test pi value"
gdb_test "next" "s := sin\\(u\\);" "Advance to 's := sin(u)' line"
gdb_test "print r" " = -1" "Test cos(pi) is equal to -1"
gdb_test "next" "" "Go past 's := sin(u)' line"
set msg "Test sin(pi) is equal to 0"
gdb_test_multiple "print s" $msg {
-re ".* = (0|-?\[0-9\]\\.\[0-9\]*\[eE\](-?\[0-9\]*))\[\r\n\]+$gdb_prompt $" {
set value "$expect_out(1,string)"
verbose "value is $value" 1
if [info exists expect_out(2,string)] {
set expo $expect_out(2,string)
verbose "expo found: $expo" 1
} else {
set expo "0"
regsub ".*\[eE\]" "$value" "" expo;
}
regsub "^-" "$expo" "" mexpo;
verbose "expo is $expo" 1
verbose "mexpo is $mexpo" 1
if { $value == 0 } {
pass $msg
} elseif {$mexpo > 8} {
pass "$msg '$value' is close to zero"
} else {
fail "$msg '$value' too large"
}
verbose "Still here" 1
}
}
Go to most recent revision | Compare with Previous | Blame | View Log