Subversion Repositories openrisc

# Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# This file is based on config/gdbserver.exp, which was written by
# Michael Snyder (msnyder@redhat.com).

#
# To be addressed or set in your baseboard config file:
#
#   set_board_info gdb_protocol "remote"
#       Unles you have a gdbserver that uses a different protocol...
#
#   set_board_info gdb_server_prog
#       This will be the path to the gdbserver program you want to test.
#       Defaults to "gdbserver".
#
#   set_board_info sockethost
#       The name of the host computer whose socket is being used.
#       Defaults to "localhost".  Note: old gdbserver requires 
#       that you define this, but libremote/gdbserver does not.
#
#   set_board_info gdb,socketport
#       Port id to use for socket connection.  If not set explicitly,
#       it will start at "2345" and increment for each use.
#

#
# gdb_target_cmd
# Send gdb the "target" command
#
proc gdb_target_cmd { targetname serialport } {
    global gdb_prompt

    set serialport_re [string_to_regexp $serialport]
    for {set i 1} {$i <= 3} {incr i} {
        send_gdb "target $targetname $serialport\n"
        gdb_expect 60 {
            -re "A program is being debugged already.*ill it.*y or n. $" {
                send_gdb "y\n"
                exp_continue
            }
            -re "unknown host.*$gdb_prompt" {
                verbose "Couldn't look up $serialport"
            }
            -re "Couldn't establish connection to remote.*$gdb_prompt $" {
                verbose "Connection failed"
            }
            -re "Remote MIPS debugging.*$gdb_prompt" {
                verbose "Set target to $targetname"
                return 0
            }
            -re "Remote debugging using .*$serialport_re.*$gdb_prompt $" {
                verbose "Set target to $targetname"
                return 0
            }
            -re "Remote target $targetname connected to.*$gdb_prompt $" {
                verbose "Set target to $targetname"
                return 0
            }
            -re "Connected to.*$gdb_prompt $" { 
                verbose "Set target to $targetname"
                return 0
            }
            -re "Ending remote.*$gdb_prompt $" { }
            -re "Connection refused.*$gdb_prompt $" {
                verbose "Connection refused by remote target.  Pausing, and trying again."
                sleep 30
                continue
            }
            -re "Timeout reading from remote system.*$gdb_prompt $" {
                verbose "Got timeout error from gdb."
            }
            -notransfer -re "Remote debugging using .*\r\n> $" {
                # We got an unexpected prompt while creating the target.
                # Leave it there for the test to diagnose.
                return 1
            }
            timeout {
                send_gdb ""
                break
            }
        }
    }
    return 1
}


global portnum
set portnum "2345"

# Locate the gdbserver binary.  Returns "" if gdbserver could not be found.

proc find_gdbserver { } {
  global GDB

  if [target_info exists gdb_server_prog] {
    return [target_info gdb_server_prog]
  }

  set gdbserver "${GDB}server"
  if { [file isdirectory $gdbserver] } {
    append gdbserver "/gdbserver"
  }

  if { [file executable $gdbserver] } {
    return $gdbserver
  }

  return ""
}

# Return non-zero if we should skip gdbserver-specific tests.

proc skip_gdbserver_tests { } {
  if { [find_gdbserver] == "" } {
    return 1
  }

  return 0
}

# Download the currently loaded program to the target if necessary.
# Return the target system filename.

proc gdbserver_download { } {
    global gdbserver_host_exec
    global gdbserver_host_mtime
    global gdbserver_server_exec
    global last_loaded_file

    set host_exec $last_loaded_file

    # If we already downloaded a file to the target, see if we can reuse it.
    set reuse 0
    if { [info exists gdbserver_server_exec] } {
        set reuse 1

        # If the file has changed, we can not.
        if { $host_exec != $gdbserver_host_exec } {
            set reuse 0
        }

        # If the mtime has changed, we can not.
        if { [file mtime $host_exec] != $gdbserver_host_mtime } {
            set reuse 0
        }
    }

    if { $reuse == 0 } {
        set gdbserver_host_exec $host_exec
        set gdbserver_host_mtime [file mtime $host_exec]
        if [is_remote target] {
            set gdbserver_server_exec [gdb_download $host_exec]
        } else {
            set gdbserver_server_exec $host_exec
        }
    }

    return $gdbserver_server_exec
}

# Start a gdbserver process with initial OPTIONS and trailing ARGUMENTS.
# The port will be filled in between them automatically.
#
# Returns the target protocol and socket to connect to.

proc gdbserver_start { options arguments } {
    global portnum

    # Port id -- either specified in baseboard file, or managed here.
    if [target_info exists gdb,socketport] {
        set portnum [target_info gdb,socketport]
    } else {
        # Bump the port number to avoid conflicts with hung ports.
        incr portnum
    }

    # Extract the local and remote host ids from the target board struct.
    if [target_info exists sockethost] {
        set debughost [target_info sockethost]
    } else {
        set debughost "localhost:"
    }

    # Extract the protocol
    if [target_info exists gdb_protocol] {
        set protocol [target_info gdb_protocol]
    } else {
        set protocol "remote"
    }

    set gdbserver [find_gdbserver]

    # Export the host:port pair.
    set gdbport $debughost$portnum

    # Fire off the debug agent.
    set gdbserver_command "$gdbserver"
    if { $options != "" } {
        append gdbserver_command " $options"
    }
    append gdbserver_command " :$portnum"
    if { $arguments != "" } {
        append gdbserver_command " $arguments"
    }

    set server_spawn_id [remote_spawn target $gdbserver_command]

    # Wait for the server to open its TCP socket, so that GDB can connect.
    expect {
        -i $server_spawn_id
        -notransfer
        -re "Listening on" { }
    }

    # We can't just call close, because if gdbserver is local then that means
    # that it will get a SIGHUP.  Doing it this way could also allow us to
    # get at the inferior's input or output if necessary, and means that we
    # don't need to redirect output.
    expect_background {
        -i $server_spawn_id
        full_buffer { }
        eof {
            # The spawn ID is already closed now (but not yet waited for).
            wait -i $expect_out(spawn_id)
        }
    }

    return [list $protocol $gdbport]
}

# Start a gdbserver process running SERVER_EXEC, and connect GDB
# to it.  CHILD_ARGS are passed to the inferior.
#
# Returns the target protocol and socket to connect to.

proc gdbserver_spawn { child_args } {
    set target_exec [gdbserver_download]

    # Fire off the debug agent.  This flavour of gdbserver takes as
    # arguments the port information, the name of the executable file to
    # be debugged, and any arguments.
    set arguments "$target_exec"
    if { $child_args != "" } {
        append arguments " $child_args"
    }
    return [gdbserver_start "" $arguments]
}

# Start a gdbserver process running HOST_EXEC and pass CHILD_ARGS
# to it.  Return 0 on success, or non-zero on failure.

proc gdbserver_run { child_args } {
    global gdbserver_protocol
    global gdbserver_gdbport

    # Kill anything running before we try to start gdbserver, in case
    # we are sharing a serial connection.
    global gdb_prompt
    send_gdb "kill\n"
    gdb_expect 120 {
        -re "Kill the program being debugged. .y or n. $" {
            send_gdb "y\n"
            verbose "\t\tKilling previous program being debugged"
            exp_continue
        }
        -re "$gdb_prompt $" {
            # OK.
        }
    }

    set res [gdbserver_spawn $child_args]
    set gdbserver_protocol [lindex $res 0]
    set gdbserver_gdbport [lindex $res 1]

    return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}

# Reconnect to the previous gdbserver session.

proc gdbserver_reconnect { } {
    global gdbserver_protocol
    global gdbserver_gdbport

    return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}

# Start and connect to a gdbserver in extended mode.
proc gdbserver_start_extended { } {
    set res [gdbserver_start "--multi" ""]
    set gdbserver_protocol "extended-[lindex $res 0]"
    set gdbserver_gdbport [lindex $res 1]

    return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}