OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-6.8/] [gdb/] [testsuite/] [lib/] [trace-support.exp] - Rev 827

Go to most recent revision | Compare with Previous | Blame | View Log

# Copyright (C) 1998, 2007, 2008 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu


#
# Support procedures for trace testing
#


#
# Procedure: gdb_target_supports_trace
# Returns true if GDB is connected to a target that supports tracing.
# Allows tests to abort early if not running on a trace-aware target.
#

proc gdb_target_supports_trace { } {
    global gdb_prompt

    send_gdb "tstatus\n"
    gdb_expect {
        -re "\[Tt\]race can only be run on.*$gdb_prompt $" {
            return 0
        }
        -re "\[Tt\]race can not be run on.*$gdb_prompt $" {
            return 0
        }
        -re "\[Tt\]arget does not support.*$gdb_prompt $" {
            return 0
        }
        -re ".*\[Ee\]rror.*$gdb_prompt $" {
            return 0
        }
        -re ".*\[Ww\]arning.*$gdb_prompt $" {
            return 0
        }
        -re ".*$gdb_prompt $" {
            return 1
        }
        timeout {
            return 0
        }
    }
}


#
# Procedure: gdb_delete_tracepoints
# Many of the tests depend on setting tracepoints at various places and
# running until that tracepoint is reached.  At times, we want to start
# with a clean slate with respect to tracepoints, so this utility proc 
# lets us do this without duplicating this code everywhere.
#

proc gdb_delete_tracepoints {} {
    global gdb_prompt

    send_gdb "delete tracepoints\n"
    gdb_expect 30 {
        -re "Delete all tracepoints.*y or n.*$" {
            send_gdb "y\n";
            exp_continue
        }
        -re ".*$gdb_prompt $" { # This happens if there were no tracepoints }
        timeout { 
            perror "Delete all tracepoints in delete_tracepoints (timeout)" 
            return 
        }
    }
    send_gdb "info tracepoints\n"
    gdb_expect 30 {
         -re "No tracepoints.*$gdb_prompt $" {}
         -re "$gdb_prompt $" { perror "tracepoints not deleted" ; return }
         timeout { perror "info tracepoints (timeout)" ; return }
    }
}

#
# Procedure: gdb_trace_setactions
#   Define actions for a tracepoint.
#   Arguments:
#       testname   -- identifying string for pass/fail output
#       tracepoint -- to which tracepoint do these actions apply? (optional)
#       args       -- list of actions to be defined.
#   Returns:
#       zero       -- success
#       non-zero   -- failure

proc gdb_trace_setactions { testname tracepoint args } {
    global gdb_prompt;

    set state 0;
    set passfail "pass";
    send_gdb "actions $tracepoint\n";
    set expected_result "";
    gdb_expect 5 {
        -re "No tracepoint number .*$gdb_prompt $" {
            fail $testname
            return 1;
        }
        -re "Enter actions for tracepoint $tracepoint.*>" {
            if { [llength $args] > 0 } {
                set lastcommand "[lindex $args $state]";
                send_gdb "[lindex $args $state]\n";
                incr state;
                set expected_result [lindex $args $state];
                incr state;
            } else {
                send_gdb "end\n";
            }
            exp_continue;
        }
        -re "\(.*\)\[\r\n\]+\[ \t]*> $" {
            if { $expected_result != "" } {
                regsub "^\[^\r\n\]+\[\r\n\]+" "$expect_out(1,string)" "" out;
                if ![regexp $expected_result $out] {
                    set passfail "fail";
                }
                set expected_result "";
            }
            if { $state < [llength $args] } {
                send_gdb "[lindex $args $state]\n";
                incr state;
                set expected_result [lindex $args $state];
                incr state;
            } else {
                send_gdb "end\n";
                set expected_result "";
            }
            exp_continue;
        }
        -re "\(.*\)$gdb_prompt $" {
            if { $expected_result != "" } {
                if ![regexp $expected_result $expect_out(1,string)] {
                    set passfail "fail";
                }
                set expected_result "";
            }
            if { [llength $args] < $state } {
                set passfail "fail";
            }
        }
        default {
            set passfail "fail";
        }
    }
    if { $testname != "" } {
        $passfail $testname;
    }
    if { $passfail == "pass" } then { 
        return 0;
    } else {
        return 1;
    }
}

#
# Procedure: gdb_tfind_test
#   Find a specified trace frame.
#   Arguments: 
#       testname   -- identifying string for pass/fail output
#       tfind_arg  -- frame (line, PC, etc.) identifier
#       exp_res    -- Expected result of frame test
#       args       -- Test expression
#   Returns:
#       zero       -- success
#       non-zero   -- failure
#

proc gdb_tfind_test { testname tfind_arg exp_res args } {
    global gdb_prompt;

    if { "$args" != "" } {
        set expr "$exp_res";
        set exp_res "$args";
    } else {
        set expr "(int) \$trace_frame";
    }
    set passfail "fail";

    gdb_test "tfind $tfind_arg" "" ""
    send_gdb "printf \"x \%d x\\n\", $expr\n";
    gdb_expect 10 {
        -re "x (-*\[0-9\]+) x" {
            if { $expect_out(1,string) == $exp_res } {
                set passfail "pass";
            }
            exp_continue;
        }
        -re "$gdb_prompt $" { }
    }
    $passfail "$testname";
    if { $passfail == "pass" } then { 
        return 0;
    } else {
        return 1;
    }
}

#
# Procedure: gdb_readexpr
#   Arguments:
#       gdb_expr    -- the expression whose value is desired
#   Returns:
#       the value of gdb_expr, as evaluated by gdb.
#       [FIXME: returns -1 on error, which is sometimes a legit value]
#

proc gdb_readexpr { gdb_expr } {
    global gdb_prompt;

    set result -1;
    send_gdb "print $gdb_expr\n"
    gdb_expect 5 {
        -re "\[$\].*= (\[0-9\]+).*$gdb_prompt $" {
            set result $expect_out(1,string);
        }
        -re "$gdb_prompt $" { }
        default { }
    }
    return $result;
}

#
# Procedure: gdb_gettpnum
#   Arguments:
#       tracepoint (optional): if supplied, set a tracepoint here.
#   Returns:
#       the tracepoint ID of the most recently set tracepoint.
#

proc gdb_gettpnum { tracepoint } {
    global gdb_prompt;

    if { $tracepoint != "" } {
        gdb_test "trace $tracepoint" "" ""
    }
    return [gdb_readexpr "\$tpnum"];
}


#
# Procedure: gdb_find_function_baseline
#   Arguments:
#       func_name -- name of source function
#   Returns:
#       Sourcefile line of function definition (open curly brace),
#       or -1 on failure.  Caller must check return value.
#   Note:
#       Works only for open curly brace at beginning of source line!
#

proc gdb_find_function_baseline { func_name } {
    global gdb_prompt;

    set baseline -1;

    send_gdb "list $func_name\n"
#    gdb_expect {
#       -re "\[\r\n\]\[\{\].*$gdb_prompt $" {
#           set baseline 1
#        }
#    }
}

#
# Procedure: gdb_find_function_baseline
#   Arguments:
#       filename: name of source file of desired function.
#   Returns:
#       Sourcefile line of function definition (open curly brace),
#       or -1 on failure.  Caller must check return value.
#   Note:
#       Works only for open curly brace at beginning of source line!
#

proc gdb_find_recursion_test_baseline { filename } {
    global gdb_prompt;

    set baseline -1;

    gdb_test "list $filename:1" "" ""
    send_gdb "search gdb_recursion_test line 0\n"
    gdb_expect {
        -re "(\[0-9\]+)\[\t \]+\{.*line 0.*$gdb_prompt $" {
            set baseline $expect_out(1,string);
        }
        -re "$gdb_prompt $" { }
        default { }
    }
    return $baseline;
}

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.