URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [gdb/] [inferior.h] - Rev 826
Go to most recent revision | Compare with Previous | Blame | View Log
/* Variables that describe the inferior process running under GDB: Where it is, why it stopped, and how to step it. Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #if !defined (INFERIOR_H) #define INFERIOR_H 1 struct target_waitstatus; struct frame_info; struct ui_file; struct type; struct gdbarch; struct regcache; struct ui_out; struct terminal_info; /* For bpstat. */ #include "breakpoint.h" /* For enum target_signal. */ #include "target.h" /* For struct frame_id. */ #include "frame.h" #include "progspace.h" /* Two structures are used to record inferior state. inferior_thread_state contains state about the program itself like its registers and any signal it received when it last stopped. This state must be restored regardless of how the inferior function call ends (either successfully, or after it hits a breakpoint or signal) if the program is to properly continue where it left off. inferior_status contains state regarding gdb's control of the inferior itself like stepping control. It also contains session state like the user's currently selected frame. Call these routines around hand called functions, including function calls in conditional breakpoints for example. */ struct inferior_thread_state; struct inferior_status; extern struct inferior_thread_state *save_inferior_thread_state (void); extern struct inferior_status *save_inferior_status (void); extern void restore_inferior_thread_state (struct inferior_thread_state *); extern void restore_inferior_status (struct inferior_status *); extern struct cleanup *make_cleanup_restore_inferior_thread_state (struct inferior_thread_state *); extern struct cleanup *make_cleanup_restore_inferior_status (struct inferior_status *); extern void discard_inferior_thread_state (struct inferior_thread_state *); extern void discard_inferior_status (struct inferior_status *); extern struct regcache *get_inferior_thread_state_regcache (struct inferior_thread_state *); /* The -1 ptid, often used to indicate either an error condition or a "don't care" condition, i.e, "run all threads." */ extern ptid_t minus_one_ptid; /* The null or zero ptid, often used to indicate no process. */ extern ptid_t null_ptid; /* Attempt to find and return an existing ptid with the given PID, LWP, and TID components. If none exists, create a new one and return that. */ ptid_t ptid_build (int pid, long lwp, long tid); /* Find/Create a ptid from just a pid. */ ptid_t pid_to_ptid (int pid); /* Fetch the pid (process id) component from a ptid. */ int ptid_get_pid (ptid_t ptid); /* Fetch the lwp (lightweight process) component from a ptid. */ long ptid_get_lwp (ptid_t ptid); /* Fetch the tid (thread id) component from a ptid. */ long ptid_get_tid (ptid_t ptid); /* Compare two ptids to see if they are equal */ extern int ptid_equal (ptid_t p1, ptid_t p2); /* Return true if PTID represents a process id. */ extern int ptid_is_pid (ptid_t ptid); /* Save value of inferior_ptid so that it may be restored by a later call to do_cleanups(). Returns the struct cleanup pointer needed for later doing the cleanup. */ extern struct cleanup * save_inferior_ptid (void); extern void set_sigint_trap (void); extern void clear_sigint_trap (void); /* Set/get file name for default use for standard in/out in the inferior. */ extern void set_inferior_io_terminal (const char *terminal_name); extern const char *get_inferior_io_terminal (void); /* Collected pid, tid, etc. of the debugged inferior. When there's no inferior, PIDGET (inferior_ptid) will be 0. */ extern ptid_t inferior_ptid; /* Are we simulating synchronous execution? This is used in async gdb to implement the 'run', 'continue' etc commands, which will not redisplay the prompt until the execution is actually over. */ extern int sync_execution; /* Inferior environment. */ extern void clear_proceed_status (void); extern void proceed (CORE_ADDR, enum target_signal, int); extern int sched_multi; /* When set, stop the 'step' command if we enter a function which has no line number information. The normal behavior is that we step over such function. */ extern int step_stop_if_no_debug; /* If set, the inferior should be controlled in non-stop mode. In this mode, each thread is controlled independently. Execution commands apply only to the the selected thread by default, and stop events stop only the thread that had the event -- the other threads are kept running freely. */ extern int non_stop; /* If set (default), when following a fork, GDB will detach from one the fork branches, child or parent. Exactly which branch is detached depends on 'set follow-fork-mode' setting. */ extern int detach_fork; extern void generic_mourn_inferior (void); extern void terminal_save_ours (void); extern void terminal_ours (void); extern CORE_ADDR unsigned_pointer_to_address (struct gdbarch *gdbarch, struct type *type, const gdb_byte *buf); extern void unsigned_address_to_pointer (struct gdbarch *gdbarch, struct type *type, gdb_byte *buf, CORE_ADDR addr); extern CORE_ADDR signed_pointer_to_address (struct gdbarch *gdbarch, struct type *type, const gdb_byte *buf); extern void address_to_signed_pointer (struct gdbarch *gdbarch, struct type *type, gdb_byte *buf, CORE_ADDR addr); extern void wait_for_inferior (int treat_exec_as_sigtrap); extern void fetch_inferior_event (void *); extern void init_wait_for_inferior (void); extern void close_exec_file (void); extern void reopen_exec_file (void); /* The `resume' routine should only be called in special circumstances. Normally, use `proceed', which handles a lot of bookkeeping. */ extern void resume (int, enum target_signal); /* From misc files */ extern void default_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file, struct frame_info *frame, int regnum, int all); extern void child_terminal_info (char *, int); extern void term_info (char *, int); extern void terminal_ours_for_output (void); extern void terminal_inferior (void); extern void terminal_init_inferior (void); extern void terminal_init_inferior_with_pgrp (int pgrp); /* From fork-child.c */ extern int fork_inferior (char *, char *, char **, void (*)(void), void (*)(int), void (*)(void), char *); extern void startup_inferior (int); extern char *construct_inferior_arguments (int, char **); /* From infrun.c */ extern void start_remote (int from_tty); extern void normal_stop (void); extern int signal_stop_state (int); extern int signal_print_state (int); extern int signal_pass_state (int); extern int signal_stop_update (int, int); extern int signal_print_update (int, int); extern int signal_pass_update (int, int); extern void get_last_target_status(ptid_t *ptid, struct target_waitstatus *status); extern void follow_inferior_reset_breakpoints (void); /* Throw an error indicating the current thread is running. */ extern void error_is_running (void); /* Calls error_is_running if the current thread is running. */ extern void ensure_not_running (void); void set_step_info (struct frame_info *frame, struct symtab_and_line sal); /* From infcmd.c */ extern void post_create_inferior (struct target_ops *, int); extern void attach_command (char *, int); extern char *get_inferior_args (void); extern void set_inferior_args (char *); extern void set_inferior_args_vector (int, char **); extern void registers_info (char *, int); extern void nexti_command (char *, int); extern void stepi_command (char *, int); extern void continue_1 (int all_threads); extern void continue_command (char *, int); extern void interrupt_target_command (char *args, int from_tty); extern void interrupt_target_1 (int all_threads); extern void detach_command (char *, int); extern void notice_new_inferior (ptid_t, int, int); /* Address at which inferior stopped. */ extern CORE_ADDR stop_pc; /* Nonzero if stopped due to completion of a stack dummy routine. */ extern int stop_stack_dummy; /* Nonzero if program stopped due to a random (unexpected) signal in inferior process. */ extern int stopped_by_random_signal; /* STEP_OVER_ALL means step over all subroutine calls. STEP_OVER_UNDEBUGGABLE means step over calls to undebuggable functions. STEP_OVER_NONE means don't step over any subroutine calls. */ enum step_over_calls_kind { STEP_OVER_NONE, STEP_OVER_ALL, STEP_OVER_UNDEBUGGABLE }; /* Anything but NO_STOP_QUIETLY means we expect a trap and the caller will handle it themselves. STOP_QUIETLY is used when running in the shell before the child program has been exec'd and when running through shared library loading. STOP_QUIETLY_REMOTE is used when setting up a remote connection; it is like STOP_QUIETLY_NO_SIGSTOP except that there is no need to hide a signal. */ /* It is also used after attach, due to attaching to a process. This is a bit trickier. When doing an attach, the kernel stops the debuggee with a SIGSTOP. On newer GNU/Linux kernels (>= 2.5.61) the handling of SIGSTOP for a ptraced process has changed. Earlier versions of the kernel would ignore these SIGSTOPs, while now SIGSTOP is treated like any other signal, i.e. it is not muffled. If the gdb user does a 'continue' after the 'attach', gdb passes the global variable stop_signal (which stores the signal from the attach, SIGSTOP) to the ptrace(PTRACE_CONT,...) call. This is problematic, because the kernel doesn't ignore such SIGSTOP now. I.e. it is reported back to gdb, which in turn presents it back to the user. To avoid the problem, we use STOP_QUIETLY_NO_SIGSTOP, which allows gdb to clear the value of stop_signal after the attach, so that it is not passed back down to the kernel. */ enum stop_kind { NO_STOP_QUIETLY = 0, STOP_QUIETLY, STOP_QUIETLY_REMOTE, STOP_QUIETLY_NO_SIGSTOP }; /* Reverse execution. */ enum exec_direction_kind { EXEC_FORWARD, EXEC_REVERSE, EXEC_ERROR }; extern enum exec_direction_kind execution_direction; /* Save register contents here when executing a "finish" command or are about to pop a stack dummy frame, if-and-only-if proceed_to_finish is set. Thus this contains the return value from the called function (assuming values are returned in a register). */ extern struct regcache *stop_registers; /* True if we are debugging displaced stepping. */ extern int debug_displaced; /* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */ void displaced_step_dump_bytes (struct ui_file *file, const gdb_byte *buf, size_t len); /* Possible values for gdbarch_call_dummy_location. */ #define ON_STACK 1 #define AT_ENTRY_POINT 4 #define AT_SYMBOL 5 /* If STARTUP_WITH_SHELL is set, GDB's "run" will attempts to start up the debugee under a shell. This is in order for argument-expansion to occur. E.g., (gdb) run * The "*" gets expanded by the shell into a list of files. While this is a nice feature, it turns out to interact badly with some of the catch-fork/catch-exec features we have added. In particular, if the shell does any fork/exec's before the exec of the target program, that can confuse GDB. To disable this feature, set STARTUP_WITH_SHELL to 0. To enable this feature, set STARTUP_WITH_SHELL to 1. The catch-exec traps expected during start-up will be 1 if target is not started up with a shell, 2 if it is. - RT If you disable this, you need to decrement START_INFERIOR_TRAPS_EXPECTED in tm.h. */ #define STARTUP_WITH_SHELL 1 #if !defined(START_INFERIOR_TRAPS_EXPECTED) #define START_INFERIOR_TRAPS_EXPECTED 2 #endif struct private_inferior; /* GDB represents the state of each program execution with an object called an inferior. An inferior typically corresponds to a process but is more general and applies also to targets that do not have a notion of processes. Each run of an executable creates a new inferior, as does each attachment to an existing process. Inferiors have unique internal identifiers that are different from target process ids. Each inferior may in turn have multiple threads running in it. */ struct inferior { /* Pointer to next inferior in singly-linked list of inferiors. */ struct inferior *next; /* Convenient handle (GDB inferior id). Unique across all inferiors. */ int num; /* Actual target inferior id, usually, a process id. This matches the ptid_t.pid member of threads of this inferior. */ int pid; /* True if this was an auto-created inferior, e.g. created from following a fork; false, if this inferior was manually added by the user, and we should not attempt to prune it automatically. */ int removable; /* The address space bound to this inferior. */ struct address_space *aspace; /* The program space bound to this inferior. */ struct program_space *pspace; /* The arguments string to use when running. */ char *args; /* The size of elements in argv. */ int argc; /* The vector version of arguments. If ARGC is nonzero, then we must compute ARGS from this (via the target). This is always coming from main's argv and therefore should never be freed. */ char **argv; /* The name of terminal device to use for I/O. */ char *terminal; /* Environment to use for running inferior, in format described in environ.h. */ struct gdb_environ *environment; /* See the definition of stop_kind above. */ enum stop_kind stop_soon; /* Nonzero if this child process was attached rather than forked. */ int attach_flag; /* If this inferior is a vfork child, then this is the pointer to its vfork parent, if GDB is still attached to it. */ struct inferior *vfork_parent; /* If this process is a vfork parent, this is the pointer to the child. Since a vfork parent is left frozen by the kernel until the child execs or exits, a process can only have one vfork child at a given time. */ struct inferior *vfork_child; /* True if this inferior should be detached when it's vfork sibling exits or execs. */ int pending_detach; /* True if this inferior is a vfork parent waiting for a vfork child not under our control to be done with the shared memory region, either by exiting or execing. */ int waiting_for_vfork_done; /* What is left to do for an execution command after any thread of this inferior stops. For continuations associated with a specific thread, see `struct thread_info'. */ struct continuation *continuations; /* Private data used by the target vector implementation. */ struct private_inferior *private; /* We keep a count of the number of times the user has requested a particular syscall to be tracked, and pass this information to the target. This lets capable targets implement filtering directly. */ /* Number of times that "any" syscall is requested. */ int any_syscall_count; /* Count of each system call. */ VEC(int) *syscalls_counts; /* This counts all syscall catch requests, so we can readily determine if any catching is necessary. */ int total_syscalls_count; /* Per inferior data-pointers required by other GDB modules. */ void **data; unsigned num_data; }; /* Keep a registry of per-inferior data-pointers required by other GDB modules. */ extern const struct inferior_data *register_inferior_data (void); extern const struct inferior_data *register_inferior_data_with_cleanup (void (*cleanup) (struct inferior *, void *)); extern void clear_inferior_data (struct inferior *inf); extern void set_inferior_data (struct inferior *inf, const struct inferior_data *data, void *value); extern void *inferior_data (struct inferior *inf, const struct inferior_data *data); /* Create an empty inferior list, or empty the existing one. */ extern void init_inferior_list (void); /* Add an inferior to the inferior list, print a message that a new inferior is found, and return the pointer to the new inferior. Caller may use this pointer to initialize the private inferior data. */ extern struct inferior *add_inferior (int pid); /* Same as add_inferior, but don't print new inferior notifications to the CLI. */ extern struct inferior *add_inferior_silent (int pid); /* Delete an existing inferior list entry, due to inferior exit. */ extern void delete_inferior (int pid); /* Same as delete_inferior, but don't print new inferior notifications to the CLI. */ extern void delete_inferior_silent (int pid); /* Delete an existing inferior list entry, due to inferior detaching. */ extern void detach_inferior (int pid); extern void exit_inferior (int pid); extern void exit_inferior_silent (int pid); extern void exit_inferior_num_silent (int num); extern void inferior_appeared (struct inferior *inf, int pid); /* Get rid of all inferiors. */ extern void discard_all_inferiors (void); /* Translate the integer inferior id (GDB's homegrown id, not the system's) into a "pid" (which may be overloaded with extra inferior information). */ extern int gdb_inferior_id_to_pid (int); /* Translate a target 'pid' into the integer inferior id (GDB's homegrown id, not the system's). */ extern int pid_to_gdb_inferior_id (int pid); /* Boolean test for an already-known pid. */ extern int in_inferior_list (int pid); /* Boolean test for an already-known inferior id (GDB's homegrown id, not the system's). */ extern int valid_gdb_inferior_id (int num); /* Search function to lookup an inferior by target 'pid'. */ extern struct inferior *find_inferior_pid (int pid); /* Search function to lookup an inferior by GDB 'num'. */ extern struct inferior *find_inferior_id (int num); /* Find an inferior bound to PSPACE. */ extern struct inferior * find_inferior_for_program_space (struct program_space *pspace); /* Inferior iterator function. Calls a callback function once for each inferior, so long as the callback function returns false. If the callback function returns true, the iteration will end and the current inferior will be returned. This can be useful for implementing a search for a inferior with arbitrary attributes, or for applying some operation to every inferior. It is safe to delete the iterated inferior from the callback. */ extern struct inferior *iterate_over_inferiors (int (*) (struct inferior *, void *), void *); /* Prints the list of inferiors and their details on UIOUT. If REQUESTED_INFERIOR is not -1, it's the GDB id of the inferior that should be printed. Otherwise, all inferiors are printed. */ extern void print_inferior (struct ui_out *uiout, int requested_inferior); /* Returns true if the inferior list is not empty. */ extern int have_inferiors (void); /* Returns true if there are any live inferiors in the inferior list (not cores, not executables, real live processes). */ extern int have_live_inferiors (void); /* Return a pointer to the current inferior. It is an error to call this if there is no current inferior. */ extern struct inferior *current_inferior (void); extern void set_current_inferior (struct inferior *); extern struct cleanup *save_current_inferior (void); extern struct inferior *inferior_list; /* Prune away automatically added inferiors that aren't required anymore. */ extern void prune_inferiors (void); extern int number_of_inferiors (void); #endif /* !defined (INFERIOR_H) */
Go to most recent revision | Compare with Previous | Blame | View Log