OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [gdb/] [testsuite/] [gdb.base/] [setshow.exp] - Rev 227

Go to most recent revision | Compare with Previous | Blame | View Log

# Copyright 1992, 1994, 1996, 1997, 1998, 2001, 2003, 2007, 2008, 2009, 2010
# Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# This file was written by Michael Snyder (msnyder@cygnus.com)

if $tracelevel then {
        strace $tracelevel
}

set prms_id 0
set bug_id 0

set testfile "setshow"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable {debug}] != "" } {
     untested setshow.exp
     return -1
}

# Start with a fresh gdb

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}

# make sure $pc is sane, in case we're talking to a board.
if { ![runto_main] } {
    gdb_suppress_tests;
}

#
# Test gdb set and show commands.
# Add tests here for show and set that don't fit neatly elsewhere.
# FIXME: many rudimentary tests for set and show commands have been
#        added below, but most do nothing more than check that a 
#        variable has been set successfully, ie. they do not test
#        whether setting the variable has had the desired effect.
#

#test default annotation_level is 0
gdb_test "show annotate" "Annotation_level is 0..*"  "default annotation_level is zero"

#test set annotate 2
send_gdb "set annotate 2\n"
gdb_expect {
        -re ".*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
                                { pass "set annotate 2" }
        timeout                 { fail "(timeout) set annotate 2" }
    }

send_gdb "show annotate\n"
gdb_expect {
        -re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
                                { pass "show annotate (2)" }
        timeout                 { fail "(timeout) show annotate (2)" }
    }

#test annotation_level 2
send_gdb "info line 1\n"
gdb_expect {
        -re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
                                { pass "annotation_level 2" }
        timeout                 { fail "(timeout) annotation_level 2" }
    }

#test set annotate 1
gdb_test "set annotate 1" ".*post-prompt.*"  "set annotate 1" 
gdb_test "show annotate" "Annotation_level is 1..*"  "show annotate (1)" 
#test annotation_level 1
gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*"  "annotation_level 1" 
#test set annotate 0
gdb_test "set annotate 0" "" "set annotate 0" 
gdb_test "show annotate" "Annotation_level is 0..*"  "show annotate (0)" 
#test annotation_level 0
gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*"  "annotation_level 0" 
#test set args
gdb_test "set args foo bar blup baz bubble" "" "set args" 
#test show args
gdb_test "show args" "Argument list to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args"

# Don't test if we can't pass args or if we're using a stub.
if { ![target_info exists use_gdb_stub] && ![target_info exists noargs] } {
    #test passing args
    gdb_test "cont" "Continuing.*" "continuing"
    delete_breakpoints
    gdb_test "run" "Starting program:.*foo bar blup baz bubble.*" "passing args"
}
#test set check range on
gdb_test "set check range on" "" "set check range on" 
#test show check range on
gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)" 
#test set check range off with trailing space
gdb_test "set check range off " "" "set check range off" 
#test show check range off
gdb_test "show check range" "Range checking is \"off\"\..*" "show check range (off)" 
#test set check range auto
gdb_test "set check range auto" "" "set check range auto" 
#test show check range auto
gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)" 
#test set check type on
gdb_test "set check type on" "" "set check type on" 
#test show check type on
gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)" 
#test set check type off with trailing space
gdb_test "set check type off " "" "set check type off" 
#test show check type off
gdb_test "show check type" "Type checking is \"off\"..*" "show check type (off)" 
#test set check type auto
gdb_test "set check type auto" "" "set check type auto" 
#test show check type
gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)" 
#test set complaints 100
gdb_test "set complaints 100" "" "set complaints 100" 
#test show complaints 100
gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)" 
#test set complaints 0
gdb_test "set complaints 0" "" "set complaints 0" 
#test show complaints 0
gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)" 
#test set confirm off
gdb_test "set confirm off" "" "set confirm off" 
#test show confirm off
gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)" 
#test set confirm on
gdb_test "set confirm on" "" "set confirm on" 
#test show confirm on
gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)" 
#test set editing off
gdb_test "set editing off" "" "set editing off" 
#test show editing off
gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)" 
#test set editing on
#gdb_test "set editing on" "" "set editing on" 
#test show editing on
#gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)" 
#test set environment FOOBARBAZ
gdb_test "set environment FOOBARBAZ = grbxgrbxgrbx" ""    "set environment FOOBARBAZ" 
#test show environment FOOBARBAZ
gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*"  "show environment FOOBARBAZ" 
#test set height 100
gdb_test "set height 100" "" "set height 100" 
#test show height 100
gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height" 
# back to infinite height to avoid pagers
gdb_test "set height 0" "" "" 
#test set history expansion on
gdb_test "set history expansion on" "" "set history expansion on" 
#test show history expansion on
gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion" 
#test set history filename foobar.baz
gdb_test "set history filename foobar.baz" ""    "set history filename foobar.baz" 
#test show history filename foobar.baz
gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*"  "show history filename (foobar.baz)" 
#test set history save on
gdb_test "set history save on" "" "set history save on" 
#test show history save on
gdb_test "show history save" "Saving of the history record on exit is on..*"  "show history save (on)" 
#test set history size 100
gdb_test "set history size 100" "" "set history size 100" 
#test show history size 100
gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)" 
#test set language asm
gdb_test "set language asm" "" "set language asm" 
#test show language asm
gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)" 
#test set language java, with a trailing space
gdb_test "set language java " "" "set language java"
#test show language java
gdb_test "show language" "The current source language is \"java\"..*" "show language (java)" 
#test completion for set language.
gdb_test "complete set language min" "set language minimal" \
  "complete set language minimal"
#test set language auto
gdb_test "set language auto" "" "set language auto" 
#test show language
gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)" 
#test set listsize 100
gdb_test "set listsize 100" "" "set listsize 100" 
#test show listsize 100
gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)" 

if ![board_info target exists gdb_prompt] {
    #test set prompt (FooBarBaz) 
    set newprompt "\\(FooBarBaz\\)"
    send_gdb "set prompt (FooBarBaz) \n"
    gdb_expect {
        -re "$newprompt $"      { pass "set prompt (FooBarBaz) " }
        timeout                 { fail "(timeout) set prompt (FooBarBaz) " }
    }

    #test show prompt (FooBarBaz) 
    send_gdb "show prompt\n"
    gdb_expect {
        -re "Gdb's prompt is \"$newprompt \"..* $" \
                { pass "show prompt (FooBarBaz) " }
        timeout                 { fail "(timeout) show prompt (FooBarBaz) " }
    }

    #test set prompt (gdb) 
    send_gdb "set prompt (gdb) \n"
    gdb_expect {
        -re "$gdb_prompt $"             { pass "set prompt (gdb) " }
        timeout                 { fail "(timeout) set prompt (gdb) " }
    }
}

#test set radix 11
gdb_test "set radix 11" "Unsupported output radix ``decimal 11''; output radix unchanged..*"  "set radix 11" 
#test set radix 16
gdb_test "set radix 16" "Input and output radices now set to decimal 16, hex 10, octal 20..*"  "set radix 16" 
#test show radix 16
gdb_test "show radix" "Input and output radices set to decimal 16, hex 10, octal 20..*"  "show radix (16)" 
#test set radix 10
gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12..*"  "set radix 10" 
#test show radix 10
gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)" 
#test set width 90
gdb_test "set width 90" "" "set width 90"
#test show width 90
gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)" 
#test set write on
# This is only supported on targets which use exec.o.
gdb_test "set write on" ""  "set write on" 
#test show write on
# This is only supported on targets which use exec.o.
gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)" 
#test set symbol-reloading on
gdb_test "set symbol-reloading on" "" "set symbol-reloading on" 
#test show symbol-reloading on
gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)" 
#test show user
gdb_test "show user" "" "show user" 
#test set verbose on
gdb_test "set verbose on" "" "set verbose on" 
#test show verbose on
gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)" 
#test set verbose off
gdb_test "set verbose off" "" "set verbose off" 
#test show verbose off
gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)" 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.