OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [opcodes/] [Makefile.am] - Rev 227

Go to most recent revision | Compare with Previous | Blame | View Log

## Process this file with automake to generate Makefile.in

AUTOMAKE_OPTIONS = 1.11 foreign no-dist
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd

# Build '.' first so all generated files exist.
SUBDIRS = . po

INCDIR = $(srcdir)/../include
BFDDIR = $(srcdir)/../bfd

WARN_CFLAGS = @WARN_CFLAGS@
NO_WERROR = @NO_WERROR@
AM_CFLAGS = $(WARN_CFLAGS)

COMPILE_FOR_BUILD = $(CC_FOR_BUILD) $(INCLUDES) $(AM_CPPFLAGS) \
        $(CFLAGS_FOR_BUILD)
LINK_FOR_BUILD = $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) \
        $(LDFLAGS_FOR_BUILD) -o $@

libopcodes_la_LDFLAGS =
if INSTALL_LIBBFD
bfdlibdir = @bfdlibdir@
bfdincludedir = @bfdincludedir@
bfdlib_LTLIBRARIES = libopcodes.la
bfdinclude_DATA = $(INCDIR)/dis-asm.h
else
# Empty these so that the respective installation directories will not be created.
bfdlibdir =
bfdincludedir =
rpath_bfdlibdir = @bfdlibdir@
noinst_LTLIBRARIES = libopcodes.la
libopcodes_la_LDFLAGS += -rpath $(rpath_bfdlibdir)
endif

# This is where bfd.h lives.
BFD_H = ../bfd/bfd.h

BUILD_LIBS = @BUILD_LIBS@
BUILD_LIB_DEPS = @BUILD_LIB_DEPS@

# Header files.
HFILES = \
        fr30-desc.h fr30-opc.h \
        frv-desc.h frv-opc.h \
        h8500-opc.h \
        i386-init.h \
        i386-opc.h \
        i386-tbl.h \
        ia64-asmtab.h \
        ia64-opc.h \
        ip2k-desc.h ip2k-opc.h \
        iq2000-desc.h iq2000-opc.h \
        lm32-desc.h \
        lm32-opc.h \
        m32c-desc.h m32c-opc.h \
        m32r-desc.h m32r-opc.h \
        mcore-opc.h \
        mep-desc.h mep-opc.h \
        microblaze-opc.h \
        mt-desc.h mt-opc.h \
        openrisc-desc.h openrisc-opc.h \
        score-opc.h \
        sh-opc.h \
        sh64-opc.h \
        sysdep.h \
        w65-opc.h \
        xc16x-desc.h xc16x-opc.h \
        xstormy16-desc.h xstormy16-opc.h \
        z8k-opc.h

# C source files that correspond to .o's ending up in libopcodes
# for all machines.
TARGET_LIBOPCODES_CFILES = \
        alpha-dis.c \
        alpha-opc.c \
        arc-dis.c \
        arc-ext.c \
        arc-opc.c \
        arm-dis.c \
        avr-dis.c \
        bfin-dis.c \
        cgen-asm.c \
        cgen-bitset.c \
        cgen-dis.c \
        cgen-opc.c \
        cr16-dis.c \
        cr16-opc.c \
        cris-dis.c \
        cris-opc.c \
        crx-dis.c \
        crx-opc.c \
        d10v-dis.c \
        d10v-opc.c \
        d30v-dis.c \
        d30v-opc.c \
        dlx-dis.c \
        fr30-asm.c \
        fr30-desc.c \
        fr30-dis.c \
        fr30-ibld.c \
        fr30-opc.c \
        frv-asm.c \
        frv-desc.c \
        frv-dis.c \
        frv-ibld.c \
        frv-opc.c \
        h8300-dis.c \
        h8500-dis.c \
        hppa-dis.c \
        i370-dis.c \
        i370-opc.c \
        i386-dis.c \
        i386-opc.c \
        i860-dis.c \
        i960-dis.c \
        ia64-dis.c \
        ia64-opc.c \
        ip2k-asm.c \
        ip2k-desc.c \
        ip2k-dis.c \
        ip2k-ibld.c \
        ip2k-opc.c \
        iq2000-asm.c \
        iq2000-desc.c \
        iq2000-dis.c \
        iq2000-ibld.c \
        iq2000-opc.c \
        lm32-asm.c \
        lm32-desc.c \
        lm32-dis.c \
        lm32-ibld.c \
        lm32-opc.c \
        lm32-opinst.c \
        m10200-dis.c \
        m10200-opc.c \
        m10300-dis.c \
        m10300-opc.c \
        m32c-asm.c \
        m32c-desc.c \
        m32c-dis.c \
        m32c-ibld.c \
        m32c-opc.c \
        m32r-asm.c \
        m32r-desc.c \
        m32r-dis.c \
        m32r-ibld.c \
        m32r-opc.c \
        m32r-opinst.c \
        m68hc11-dis.c \
        m68hc11-opc.c \
        m68k-dis.c \
        m68k-opc.c \
        m88k-dis.c \
        maxq-dis.c \
        mcore-dis.c \
        mep-asm.c \
        mep-desc.c \
        mep-dis.c \
        mep-ibld.c \
        mep-opc.c \
        microblaze-dis.c \
        mips-dis.c \
        mips-opc.c \
        mips16-opc.c \
        mmix-dis.c \
        mmix-opc.c \
        moxie-dis.c \
        moxie-opc.c \
        msp430-dis.c \
        mt-asm.c \
        mt-desc.c \
        mt-dis.c \
        mt-ibld.c \
        mt-opc.c \
        ns32k-dis.c \
        openrisc-asm.c \
        openrisc-desc.c \
        openrisc-dis.c \
        openrisc-ibld.c \
        openrisc-opc.c \
        or32-dis.c \
        or32-opc.c \
        pdp11-dis.c \
        pdp11-opc.c \
        pj-dis.c \
        pj-opc.c \
        ppc-dis.c \
        ppc-opc.c \
        rx-decode.c \
        rx-dis.c \
        s390-dis.c \
        s390-opc.c \
        score-dis.c \
        score7-dis.c \
        sh-dis.c \
        sh64-dis.c \
        sh64-opc.c \
        sparc-dis.c \
        sparc-opc.c \
        spu-dis.c \
        spu-opc.c \
        tic30-dis.c \
        tic4x-dis.c \
        tic54x-dis.c \
        tic54x-opc.c \
        tic80-dis.c \
        tic80-opc.c \
        v850-dis.c \
        v850-opc.c \
        vax-dis.c \
        w65-dis.c \
        xc16x-asm.c \
        xc16x-desc.c \
        xc16x-dis.c \
        xc16x-ibld.c \
        xc16x-opc.c \
        xstormy16-asm.c \
        xstormy16-desc.c \
        xstormy16-dis.c \
        xstormy16-ibld.c \
        xstormy16-opc.c \
        xtensa-dis.c \
        z80-dis.c \
        z8k-dis.c

# C source files that correspond to .o's ending up in libopcodes.
LIBOPCODES_CFILES = \
        $(TARGET_LIBOPCODES_CFILES) \
        dis-buf.c \
        dis-init.c \
        disassemble.c

# C source files that correspond to .o's.
CFILES = \
        $(LIBOPCODES_CFILES) \
        i386-gen.c \
        ia64-asmtab.c \
        ia64-gen.c \
        ia64-opc-a.c \
        ia64-opc-b.c \
        ia64-opc-f.c \
        ia64-opc-i.c \
        ia64-opc-m.c \
        ia64-opc-d.c \
        s390-mkopc.c \
        z8kgen.c

ALL_MACHINES = $(TARGET_LIBOPCODES_CFILES:.c=.lo)

OFILES = @BFD_MACHINES@

# We should reconfigure whenever bfd/configure.in changes, because
# that's where the version number in Makefile comes from.
CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in

AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(INCDIR) -I$(BFDDIR) @HDEFINES@ @INCINTL@

disassemble.lo: disassemble.c
if am__fastdepCC
        $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ @archdefs@ $(srcdir)/disassemble.c
        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
else
if AMDEP
        source='disassemble.c' object='$@' libtool=yes @AMDEPBACKSLASH@
        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
        $(LTCOMPILE) -c -o $@ @archdefs@ $(srcdir)/disassemble.c
endif

libopcodes_la_SOURCES =  dis-buf.c disassemble.c dis-init.c
# It's desirable to list ../bfd/libbfd.la in DEPENDENCIES and LIBADD.
# Unfortunately this causes libtool to add -L$(libdir), referring to the
# planned install directory of libbfd.  This can cause us to pick up an
# old version of libbfd, or to pick up libbfd for the wrong architecture
# if host != build. So for building with shared libraries we use a
# hardcoded path to libbfd.so instead of relying on the entries in libbfd.la.
libopcodes_la_DEPENDENCIES = $(OFILES) @SHARED_DEPENDENCIES@
libopcodes_la_LIBADD = $(OFILES) @SHARED_LIBADD@
libopcodes_la_LDFLAGS += -release `cat ../bfd/libtool-soversion` @SHARED_LDFLAGS@
# Allow dependency tracking to work on all the source files.
EXTRA_libopcodes_la_SOURCES = $(LIBOPCODES_CFILES)

# libtool will build .libs/libopcodes.a.  We create libopcodes.a in
# the build directory so that we don't have to convert all the
# programs that use libopcodes.a simultaneously.  This is a hack which
# should be removed if everything else starts using libtool.  FIXME.

noinst_LIBRARIES = libopcodes.a

stamp-lib: libopcodes.la
        libtooldir=`$(LIBTOOL) --config | sed -n -e 's/^objdir=//p'`; \
        if [ -f $$libtooldir/libopcodes.a ]; then \
          cp $$libtooldir/libopcodes.a libopcodes.tmp; \
          $(RANLIB) libopcodes.tmp; \
          $(SHELL) $(srcdir)/../move-if-change libopcodes.tmp libopcodes.a; \
        else true; fi
        touch stamp-lib

libopcodes.a: stamp-lib ; @true

POTFILES = $(HFILES) $(CFILES)
po/POTFILES.in: @MAINT@ Makefile
        for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
          && mv tmp $(srcdir)/po/POTFILES.in

CLEANFILES = \
        stamp-ip2k stamp-m32c stamp-m32r stamp-fr30 stamp-frv \
        stamp-openrisc stamp-iq2000 stamp-mep stamp-mt stamp-xstormy16 stamp-xc16x\
        libopcodes.a stamp-lib dep.sed DEP DEPA DEP1 DEP2


CGENDIR = @cgendir@
CPUDIR = $(CGENDIR)/cpu
CGEN = "`if test -f ../guile/libguile/guile ; then echo ../guile/libguile/guile; else echo guile ; fi` -l ${cgendir}/guile.scm -s"
CGENFLAGS = -v

CGENDEPS = \
        $(CGENDIR)/desc.scm $(CGENDIR)/desc-cpu.scm \
        $(CGENDIR)/opcodes.scm $(CGENDIR)/opc-asmdis.scm \
        $(CGENDIR)/opc-ibld.scm $(CGENDIR)/opc-itab.scm \
        $(CGENDIR)/opc-opinst.scm \
        cgen-asm.in cgen-dis.in cgen-ibld.in

CGEN_CPUS = fr30 frv ip2k iq2000 lm32 m32c m32r mep mt openrisc xc16x xstormy16

if CGEN_MAINT
FR30_DEPS = stamp-fr30
FRV_DEPS = stamp-frv
IP2K_DEPS = stamp-ip2k
IQ2000_DEPS = stamp-iq2000
LM32_DEPS = stamp-lm32
M32C_DEPS = stamp-m32c
M32R_DEPS = stamp-m32r
MEP_DEPS = stamp-mep
MT_DEPS = stamp-mt
OPENRISC_DEPS = stamp-openrisc
XC16X_DEPS = stamp-xc16x
XSTORMY16_DEPS = stamp-xstormy16
else
FR30_DEPS =
FRV_DEPS =
IP2K_DEPS =
IQ2000_DEPS = 
LM32_DEPS = 
M32C_DEPS =
M32R_DEPS =
MEP_DEPS =
MT_DEPS =
OPENRISC_DEPS = 
XC16X_DEPS = 
XSTORMY16_DEPS = 
endif

run-cgen:
        $(SHELL) $(srcdir)/cgen.sh opcodes $(srcdir) $(CGEN) \
          $(CGENDIR) "$(CGENFLAGS)" $(arch) $(prefix) $(archfile) $(opcfile) \
          "$(options)" "$(extrafiles)"
        touch stamp-${prefix}
.PHONY: run-cgen

# Maintainer utility rule to regenerate all cgen files.
run-cgen-all:
        for c in $(CGEN_CPUS) ; \
        do \
                $(MAKE) stamp-$$c || exit 1 ; \
        done
.PHONY: run-cgen-all

# For now, require developers to configure with --enable-cgen-maint.

$(srcdir)/fr30-desc.h $(srcdir)/fr30-desc.c $(srcdir)/fr30-opc.h $(srcdir)/fr30-opc.c $(srcdir)/fr30-ibld.c $(srcdir)/fr30-asm.c $(srcdir)/fr30-dis.c: $(FR30_DEPS)
        @true
stamp-fr30: $(CGENDEPS) $(CPUDIR)/fr30.cpu $(CPUDIR)/fr30.opc
        $(MAKE) run-cgen arch=fr30 prefix=fr30 options= \
                archfile=$(CPUDIR)/fr30.cpu opcfile=$(CPUDIR)/fr30.opc extrafiles=

$(srcdir)/frv-desc.h $(srcdir)/frv-desc.c $(srcdir)/frv-opc.h $(srcdir)/frv-opc.c $(srcdir)/frv-ibld.c $(srcdir)/frv-asm.c $(srcdir)/frv-dis.c: $(FRV_DEPS)
        @true
stamp-frv: $(CGENDEPS) $(srcdir)/../cpu/frv.cpu $(srcdir)/../cpu/frv.opc
        $(MAKE) run-cgen arch=frv prefix=frv options= \
                archfile=$(srcdir)/../cpu/frv.cpu opcfile=$(srcdir)/../cpu/frv.opc extrafiles=

$(srcdir)/ip2k-desc.h $(srcdir)/ip2k-desc.c $(srcdir)/ip2k-opc.h $(srcdir)/ip2k-opc.c $(srcdir)/ip2k-ibld.c $(srcdir)/ip2k-asm.c $(srcdir)/ip2k-dis.c: $(IP2K_DEPS)
        @true
stamp-ip2k: $(CGENDEPS) $(CPUDIR)/ip2k.cpu $(CPUDIR)/ip2k.opc
        $(MAKE) run-cgen arch=ip2k prefix=ip2k options= \
                archfile=$(CPUDIR)/ip2k.cpu opcfile=$(CPUDIR)/ip2k.opc extrafiles=

$(srcdir)/iq2000-desc.h $(srcdir)/iq2000-desc.c $(srcdir)/iq2000-opc.h $(srcdir)/iq2000-opc.c $(srcdir)/iq2000-ibld.c $(srcdir)/iq2000-asm.c $(srcdir)/iq2000-dis.c: $(IQ2000_DEPS)
        @true
stamp-iq2000: $(CGENDEPS) $(srcdir)/../cpu/iq2000.cpu \
                $(srcdir)/../cpu/iq2000.opc $(srcdir)/../cpu/iq2000m.cpu \
                $(srcdir)/../cpu/iq10.cpu
        $(MAKE) run-cgen arch=iq2000 prefix=iq2000 options= \
                archfile=$(srcdir)/../cpu/iq2000.cpu \
                opcfile=$(srcdir)/../cpu/iq2000.opc extrafiles=

$(srcdir)lm32-desc.h $(srcdir)/lm32-desc.c $(srcdir)/lm32-opc.h $(srcdir)/lm32-opc.c $(srcdir)/lm32-ibld.c $(srcdir)/lm32-opinst.c $(srcdir)/lm32-asm.c $(srcdir)/lm32-dis.c: $(LM32_DEPS)
        @true
stamp-lm32: $(CGENDEPS) $(srcdir)/../cpu/lm32.cpu $(srcdir)/../cpu/lm32.opc
        $(MAKE) run-cgen arch=lm32 prefix=lm32 options=opinst \
                archfile=$(srcdir)/../cpu/lm32.cpu \
                opcfile=$(srcdir)/../cpu/lm32.opc \
                extrafiles=opinst

$(srcdir)/m32c-desc.h $(srcdir)/m32c-desc.c $(srcdir)/m32c-opc.h $(srcdir)/m32c-opc.c $(srcdir)/m32c-ibld.c $(srcdir)/m32c-asm.c $(srcdir)/m32c-dis.c: $(M32C_DEPS)
#       @true
stamp-m32c: $(CGENDEPS) $(srcdir)/../cpu/m32c.cpu $(srcdir)/../cpu/m32c.opc
        $(MAKE) run-cgen arch=m32c prefix=m32c options= \
                archfile=$(srcdir)/../cpu/m32c.cpu \
                opcfile=$(srcdir)/../cpu/m32c.opc extrafiles=

$(srcdir)/m32r-desc.h $(srcdir)/m32r-desc.c $(srcdir)/m32r-opc.h $(srcdir)/m32r-opc.c $(srcdir)/m32r-ibld.c $(srcdir)/m32r-opinst.c $(srcdir)/m32r-asm.c $(srcdir)/m32r-dis.c: $(M32R_DEPS)
        @true
stamp-m32r: $(CGENDEPS) $(srcdir)/../cpu/m32r.cpu $(srcdir)/../cpu/m32r.opc
        $(MAKE) run-cgen arch=m32r prefix=m32r options=opinst \
                archfile=$(srcdir)/../cpu/m32r.cpu \
                opcfile=$(srcdir)/../cpu/m32r.opc extrafiles=opinst

$(srcdir)/mep-desc.h $(srcdir)/mep-desc.c $(srcdir)/mep-opc.h $(srcdir)/mep-opc.c $(srcdir)/mep-ibld.c $(srcdir)/mep-asm.c $(srcdir)/mep-dis.c: $(MEP_DEPS)
        @true
stamp-mep: $(CGENDEPS) $(CPUDIR)/mep.cpu $(CPUDIR)/mep-default.cpu $(CPUDIR)/mep-core.cpu $(CPUDIR)/mep-h1.cpu $(CPUDIR)/mep-ext-cop.cpu $(CPUDIR)/mep-sample-ucidsp.cpu $(CPUDIR)/mep-rhcop.cpu $(CPUDIR)/mep-fmax.cpu $(CPUDIR)/mep.opc
        $(MAKE) run-cgen arch=mep prefix=mep options= \
                archfile=$(CPUDIR)/mep.cpu opcfile=$(CPUDIR)/mep.opc extrafiles=

$(srcdir)/mt-desc.h $(srcdir)/mt-desc.c $(srcdir)/mt-opc.h $(srcdir)/mt-opc.c $(srcdir)/mt-ibld.c $(srcdir)/mt-asm.c $(srcdir)/mt-dis.c: $(MT_DEPS)
        @true
stamp-mt: $(CGENDEPS) $(srcdir)/../cpu/mt.cpu $(srcdir)/../cpu/mt.opc
        $(MAKE) run-cgen arch=mt prefix=mt options= \
                archfile=$(srcdir)/../cpu/mt.cpu \
                opcfile=$(srcdir)/../cpu/mt.opc extrafiles=

$(srcdir)/openrisc-desc.h $(srcdir)/openrisc-desc.c $(srcdir)/openrisc-opc.h $(srcdir)/openrisc-opc.c $(srcdir)/openrisc-ibld.c $(srcdir)/openrisc-asm.c $(srcdir)/openrisc-dis.c: $(OPENRISC_DEPS)
        @true
stamp-openrisc: $(CGENDEPS) $(CPUDIR)/openrisc.cpu $(CPUDIR)/openrisc.opc
        $(MAKE) run-cgen arch=openrisc prefix=openrisc options= \
                archfile=$(CPUDIR)/openrisc.cpu opcfile=$(CPUDIR)/openrisc.opc extrafiles=

$(srcdir)/xc16x-desc.h $(srcdir)/xc16x-desc.c $(srcdir)/xc16x-opc.h $(srcdir)/xc16x-opc.c $(srcdir)/xc16x-ibld.c $(srcdir)/xc16x-asm.c $(srcdir)/xc16x-dis.c: $(XC16X_DEPS)
        @true
stamp-xc16x: $(CGENDEPS) $(srcdir)/../cpu/xc16x.cpu $(srcdir)/../cpu/xc16x.opc
        $(MAKE) run-cgen arch=xc16x prefix=xc16x options= \
                archfile=$(srcdir)/../cpu/xc16x.cpu \
                opcfile=$(srcdir)/../cpu/xc16x.opc \
                extrafiles=

$(srcdir)/xstormy16-desc.h $(srcdir)/xstormy16-desc.c $(srcdir)/xstormy16-opc.h $(srcdir)/xstormy16-opc.c $(srcdir)/xstormy16-ibld.c $(srcdir)/xstormy16-asm.c $(srcdir)/xstormy16-dis.c: $(XSTORMY16_DEPS)
        @true
stamp-xstormy16: $(CGENDEPS) $(CPUDIR)/xstormy16.cpu $(CPUDIR)/xstormy16.opc
        $(MAKE) run-cgen arch=xstormy16 prefix=xstormy16 options= \
                archfile=$(CPUDIR)/xstormy16.cpu opcfile=$(CPUDIR)/xstormy16.opc extrafiles=

MOSTLYCLEANFILES = i386-gen$(EXEEXT_FOR_BUILD) ia64-gen$(EXEEXT_FOR_BUILD) \
        s390-mkopc$(EXEEXT_FOR_BUILD) z8kgen$(EXEEXT_FOR_BUILD) \
        opc2c$(EXEEXT_FOR_BUILD)

MAINTAINERCLEANFILES = $(srcdir)/i386-tbl.h $(srcdir)/i386-init.h \
        $(srcdir)/ia64-asmtab.c s390-opc.tab $(srcdir)/z8k-opc.h \
        $(srcdir)/rx-decode.c

i386-gen$(EXEEXT_FOR_BUILD): i386-gen.o $(BUILD_LIB_DEPS)
        $(LINK_FOR_BUILD) i386-gen.o $(BUILD_LIBS)

i386-gen.o: i386-gen.c i386-opc.h $(srcdir)/../include/opcode/i386.h \
        $(INCDIR)/ansidecl.h $(INCDIR)/getopt.h $(INCDIR)/hashtab.h \
        $(INCDIR)/libiberty.h $(INCDIR)/opcode/i386.h $(INCDIR)/safe-ctype.h \
        config.h i386-opc.h sysdep.h
        $(COMPILE_FOR_BUILD) -c $(srcdir)/i386-gen.c

$(srcdir)/i386-tbl.h: $(srcdir)/i386-init.h 
        @echo $@

$(srcdir)/i386-init.h: @MAINT@ i386-gen$(EXEEXT_FOR_BUILD) i386-opc.tbl i386-reg.tbl
        ./i386-gen$(EXEEXT_FOR_BUILD) --srcdir $(srcdir)

i386-opc.lo: $(srcdir)/i386-tbl.h

ia64-gen$(EXEEXT_FOR_BUILD): ia64-gen.o $(BUILD_LIB_DEPS)
        $(LINK_FOR_BUILD) ia64-gen.o $(BUILD_LIBS)

ia64-gen.o: ia64-gen.c $(BFD_H) $(INCDIR)/ansidecl.h $(INCDIR)/getopt.h \
        $(INCDIR)/libiberty.h $(INCDIR)/opcode/ia64.h $(INCDIR)/safe-ctype.h \
        $(INCDIR)/symcat.h config.h ia64-opc-a.c ia64-opc-b.c \
        ia64-opc-d.c ia64-opc-f.c ia64-opc-i.c ia64-opc-m.c \
        ia64-opc-x.c ia64-opc.h sysdep.h
        $(COMPILE_FOR_BUILD) -c $(srcdir)/ia64-gen.c

# Use a helper variable for the dependencies to avoid 'make' issues
# with continuations in comments, as @MAINT@ can be expanded to '#'.
ia64_asmtab_deps = ia64-gen$(EXEEXT_FOR_BUILD) ia64-ic.tbl \
        ia64-raw.tbl ia64-waw.tbl ia64-war.tbl
$(srcdir)/ia64-asmtab.c: @MAINT@ $(ia64_asmtab_deps)
        ./ia64-gen$(EXEEXT_FOR_BUILD) --srcdir $(srcdir) > $@

ia64-opc.lo: $(srcdir)/ia64-asmtab.c

$(srcdir)/rx-decode.c: @MAINT@ $(srcdir)/rx-decode.opc opc2c$(EXEEXT_FOR_BUILD)
        ./opc2c$(EXEEXT_FOR_BUILD) $(srcdir)/rx-decode.opc > $(srcdir)/rx-decode.c

opc2c$(EXEEXT_FOR_BUILD): opc2c.o $(BUILD_LIBS_DEPS)
        $(LINK_FOR_BUILD) opc2c.o $(BUILD_LIBS)

opc2c.o: opc2c.c $(INCDIR)/libiberty.h
        $(COMPILE_FOR_BUILD) -c $(srcdir)/opc2c.c

s390-mkopc$(EXEEXT_FOR_BUILD): s390-mkopc.c
        $(COMPILE_FOR_BUILD) -o s390-mkopc $(srcdir)/s390-mkopc.c

s390-opc.tab: s390-mkopc$(EXEEXT_FOR_BUILD) s390-opc.txt
        ./s390-mkopc$(EXEEXT_FOR_BUILD) < $(srcdir)/s390-opc.txt > s390-opc.tab

s390-opc.lo: s390-opc.tab

z8kgen$(EXEEXT_FOR_BUILD): z8kgen.o $(BUILD_LIB_DEPS)
        $(LINK_FOR_BUILD) z8kgen.o $(BUILD_LIBS)

z8kgen.o: z8kgen.c
        $(COMPILE_FOR_BUILD) -c $(srcdir)/z8kgen.c

$(srcdir)/z8k-opc.h: @MAINT@ z8kgen$(EXEEXT_FOR_BUILD)
        ./z8kgen$(EXEEXT_FOR_BUILD) -a > $@

z8k-dis.lo: $(srcdir)/z8k-opc.h

sh-dis.lo: sh-dis.c
if am__fastdepCC
        $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ @archdefs@ $(srcdir)/sh-dis.c
        mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
else
if AMDEP
        source='sh-dis.c' object='$@' libtool=yes @AMDEPBACKSLASH@
        DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
        $(LTCOMPILE) -c -o $@ @archdefs@ $(srcdir)/sh-dis.c
endif

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.