OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [gdb-7.1/] [sim/] [m32r/] [m32r-sim.h] - Rev 834

Go to most recent revision | Compare with Previous | Blame | View Log

/* collection of junk waiting time to sort out
   Copyright (C) 1996, 1997, 1998, 2003, 2007, 2008, 2009, 2010
   Free Software Foundation, Inc.
   Contributed by Cygnus Support.
 
   This file is part of GDB, the GNU debugger.
 
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3 of the License, or
   (at your option) any later version.
 
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
#ifndef M32R_SIM_H
#define M32R_SIM_H
 
/* GDB register numbers.  */
#define PSW_REGNUM	16
#define CBR_REGNUM	17
#define SPI_REGNUM	18
#define SPU_REGNUM	19
#define BPC_REGNUM	20
#define PC_REGNUM	21
#define ACCL_REGNUM	22
#define ACCH_REGNUM	23
#define ACC1L_REGNUM	24
#define ACC1H_REGNUM	25
#define BBPSW_REGNUM	26
#define BBPC_REGNUM	27
#define EVB_REGNUM	28
 
extern int m32r_decode_gdb_ctrl_regnum (int);
 
/* Cover macros for hardware accesses.
   FIXME: Eventually move to cgen.  */
#define GET_H_SM() ((CPU (h_psw) & 0x80) != 0)
 
#ifndef GET_H_CR
extern USI  m32rbf_h_cr_get_handler (SIM_CPU *, UINT);
extern void m32rbf_h_cr_set_handler (SIM_CPU *, UINT, USI);
 
#define GET_H_CR(regno) \
  XCONCAT2 (WANT_CPU,_h_cr_get_handler) (current_cpu, (regno))
#define SET_H_CR(regno, val) \
  XCONCAT2 (WANT_CPU,_h_cr_set_handler) (current_cpu, (regno), (val))
#endif
 
#ifndef  GET_H_PSW
extern UQI  m32rbf_h_psw_get_handler (SIM_CPU *);
extern void m32rbf_h_psw_set_handler (SIM_CPU *, UQI);
 
#define GET_H_PSW() \
  XCONCAT2 (WANT_CPU,_h_psw_get_handler) (current_cpu)
#define SET_H_PSW(val) \
  XCONCAT2 (WANT_CPU,_h_psw_set_handler) (current_cpu, (val))
#endif
 
#ifndef  GET_H_ACCUM
extern DI   m32rbf_h_accum_get_handler (SIM_CPU *);
extern void m32rbf_h_accum_set_handler (SIM_CPU *, DI);
 
#define GET_H_ACCUM() \
  XCONCAT2 (WANT_CPU,_h_accum_get_handler) (current_cpu)
#define SET_H_ACCUM(val) \
  XCONCAT2 (WANT_CPU,_h_accum_set_handler) (current_cpu, (val))
#endif

/* Misc. profile data.  */
 
typedef struct {
  /* nop insn slot filler count */
  unsigned int fillnop_count;
  /* number of parallel insns */
  unsigned int parallel_count;
 
  /* FIXME: generalize this to handle all insn lengths, move to common.  */
  /* number of short insns, not including parallel ones */
  unsigned int short_count;
  /* number of long insns */
  unsigned int long_count;
 
  /* Working area for computing cycle counts.  */
  unsigned long insn_cycles; /* FIXME: delete */
  unsigned long cti_stall;
  unsigned long load_stall;
  unsigned long biggest_cycles;
 
  /* Bitmask of registers loaded by previous insn.  */
  unsigned int load_regs;
  /* Bitmask of registers loaded by current insn.  */
  unsigned int load_regs_pending;
} M32R_MISC_PROFILE;
 
/* Initialize the working area.  */
void m32r_init_insn_cycles (SIM_CPU *, int);
/* Update the totals for the insn.  */
void m32r_record_insn_cycles (SIM_CPU *, int);
 
/* This is invoked by the nop pattern in the .cpu file.  */
#define PROFILE_COUNT_FILLNOPS(cpu, addr) \
do { \
  if (PROFILE_INSN_P (cpu) \
      && (addr & 3) != 0) \
    ++ CPU_M32R_MISC_PROFILE (cpu)->fillnop_count; \
} while (0)
 
/* This is invoked by the execute section of mloop{,x}.in.  */
#define PROFILE_COUNT_PARINSNS(cpu) \
do { \
  if (PROFILE_INSN_P (cpu)) \
    ++ CPU_M32R_MISC_PROFILE (cpu)->parallel_count; \
} while (0)
 
/* This is invoked by the execute section of mloop{,x}.in.  */
#define PROFILE_COUNT_SHORTINSNS(cpu) \
do { \
  if (PROFILE_INSN_P (cpu)) \
    ++ CPU_M32R_MISC_PROFILE (cpu)->short_count; \
} while (0)
 
/* This is invoked by the execute section of mloop{,x}.in.  */
#define PROFILE_COUNT_LONGINSNS(cpu) \
do { \
  if (PROFILE_INSN_P (cpu)) \
    ++ CPU_M32R_MISC_PROFILE (cpu)->long_count; \
} while (0)

#define GETTWI GETTSI
#define SETTWI SETTSI

/* Additional execution support.  */
 

/* Hardware/device support.
   ??? Will eventually want to move device stuff to config files.  */
 
/* Exception, Interrupt, and Trap addresses */
#define EIT_SYSBREAK_ADDR	0x10
#define EIT_RSVD_INSN_ADDR	0x20
#define EIT_ADDR_EXCP_ADDR	0x30
#define EIT_TRAP_BASE_ADDR	0x40
#define EIT_EXTERN_ADDR		0x80
#define EIT_RESET_ADDR		0x7ffffff0
#define EIT_WAKEUP_ADDR		0x7ffffff0
 
/* Special purpose traps.  */
#define TRAP_SYSCALL	0
#define TRAP_BREAKPOINT	1
 
/* Support for the MSPR register (Cache Purge Control Register)
   and the MCCR register (Cache Control Register) are needed in order for
   overlays to work correctly with the scache.
   MSPR no longer exists but is supported for upward compatibility with
   early overlay support.  */
 
/* Cache Purge Control (only exists on early versions of chips) */
#define MSPR_ADDR 0xfffffff7
#define MSPR_PURGE 1
 
/* Lock Control Register (not supported) */
#define MLCR_ADDR 0xfffffff7
#define MLCR_LM 1
 
/* Power Management Control Register (not supported) */
#define MPMR_ADDR 0xfffffffb
 
/* Cache Control Register */
#define MCCR_ADDR 0xffffffff
#define MCCR_CP 0x80
/* not supported */
#define MCCR_CM0 2
#define MCCR_CM1 1
 
/* Serial device addresses.  */
#ifdef M32R_EVA /* orig eva board, no longer supported */
#define UART_INCHAR_ADDR	0xff102013
#define UART_OUTCHAR_ADDR	0xff10200f
#define UART_STATUS_ADDR	0xff102006
/* Indicate ready bit is inverted.  */
#define UART_INPUT_READY0
#else
/* These are the values for the MSA2000 board.
   ??? Will eventually need to move this to a config file.  */
#define UART_INCHAR_ADDR	0xff004009
#define UART_OUTCHAR_ADDR	0xff004007
#define UART_STATUS_ADDR	0xff004002
#endif
 
#define UART_INPUT_READY	0x4
#define UART_OUTPUT_READY	0x1
 
/* Start address and length of all device support.  */
#define M32R_DEVICE_ADDR	0xff000000
#define M32R_DEVICE_LEN		0x00ffffff
 
/* sim_core_attach device argument.  */
extern device m32r_devices;
 
/* FIXME: Temporary, until device support ready.  */
struct _device { int foo; };
 
/* Handle the trap insn.  */
USI m32r_trap (SIM_CPU *, PCADDR, int);
 
#endif /* M32R_SIM_H */
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.