Subversion Repositories openrisc

#
#

DESTDIR =
VPATH = @srcdir@ @srcdir@/..
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..
top_srcdir = @top_srcdir@

prefix = @prefix@
exec_prefix = @exec_prefix@

host_alias = @host_alias@
target_alias = @target_alias@

bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTIDIRS =
MULTISUBDIR =

SHELL = /bin/sh

mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs

CC = @CC@

AS = @AS@
AR = @AR@
LD = @LD@
RANLIB = @RANLIB@

OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
        then echo ${objroot}/../binutils/objdump ; \
        else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
        then echo ${objroot}/../binutils/objcopy ; \
        else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`

OBJS            =
CFLAGS          =
SCRIPTS         =

# Here is all of the simulator stuff
SIM_SCRIPTS     =
SIM_LDFLAGS     =
SIM_BSP         = libsim.a
SIM_CRT0        = crt0.o
SIM_OBJS        = syscalls.o
SIM_TEST        = sim-test
SIM_INSTALL     = install-sim

# Here is all of the development board stuff
# BF531, BF532, BF533, BF537
BOARD_SCRIPTS   = bfin-common-sc.ld  bfin-common-mc.ld \
        bf522.ld bf523.ld bf524.ld bf525.ld bf526.ld bf527.ld \
        bf531.ld bf532.ld bf533.ld \
        bf534.ld bf536.ld bf537.ld \
        bf538.ld bf539.ld \
        bf542.ld bf544.ld bf547.ld bf548.ld bf549.ld \
        bf561.ld bf561a.ld bf561b.ld bf561m.ld
BOARD_LDFLAGS   =
BOARD_BSP       = # We actually use libnosys.a
BOARD_CRT0S     = basiccrt.o basiccrts.o
BOARD_CRT0S     += basiccrt561.o basiccrt561s.o basiccrt561b.o
BOARD_OBJS      =
BOARD_TEST      =
BOARD_INSTALL   = install-board

# Host specific makefile fragment comes in here.
@host_makefile_frag@

INCLUDES += -I$(srcdir)/include
#
# build a test program for each target board. Just trying to get
# it to link is a good test, so we ignore all the errors for now.
#
all: ${SIM_CRT0} ${SIM_BSP} ${BOARD_CRT0S} ${BOARD_BSP}

#
# here's where we build the board support packages for each target
#
${SIM_BSP}: ${OBJS} ${SIM_OBJS}
        ${AR} ${ARFLAGS} ${SIM_BSP} ${SIM_OBJS} ${OBJS}
        ${RANLIB} ${SIM_BSP}

#
#
#
crt0.o: crt0.S

basiccrt.o: basiccrt.S
ifneq (,$(findstring mcpu=bf532-none,$(CFLAGS)))
        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -o $@ -c $<
else
        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf532-any -o $@ -c $<
endif

basiccrts.o: basiccrt.S
ifneq (,$(findstring mcpu=bf532-none,$(CFLAGS)))
        $(CC) -D__BFIN_SDRAM $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -o $@ -c $<
else
        $(CC) -D__BFIN_SDRAM $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf532-any -o $@ -c $<
endif

basiccrt561.o: basiccrt.S
ifneq (,$(findstring mcpu=bf532-none,$(CFLAGS)))
        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-none -o $@ -c $<
else
        $(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-any -o $@ -c $<
endif

basiccrt561s.o: basiccrt.S
ifneq (,$(findstring mcpu=bf532-none,$(CFLAGS)))
        $(CC) -D__BFIN_SDRAM $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-none -o $@ -c $<
else
        $(CC) -D__BFIN_SDRAM $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-any -o $@ -c $<
endif


basiccrt561b.o: basiccrt.S
ifneq (,$(findstring mcpu=bf532-none,$(CFLAGS)))
        $(CC) -D__ADSPBF561_COREB__ $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-none -o $@ -c $<
else
        $(CC) -D__ADSPBF561_COREB__ $(CFLAGS_FOR_TARGET) $(INCLUDES) $(CFLAGS) -mcpu=bf561-any -o $@ -c $<
endif

clean mostlyclean:
        rm -f a.out core *.i *.o ${SIM_BSP} ${BOARD_BSP}

distclean maintainer-clean realclean: clean
        rm -f Makefile config.status *~

.PHONY: install info install-info clean-info
install: ${SIM_INSTALL} ${BOARD_INSTALL}

install-sim:
        for x in ${SIM_CRT0} ${SIM_BSP} ${SIM_SCRIPTS}; do \
         ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \
        done

install-board:
        for x in ${BOARD_CRT0S} ${BOARD_BSP}; do \
         ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \
        done
        -if [ -z "${MULTISUBDIR}" ]; then \
          for x in ${BOARD_SCRIPTS}; do \
           ${INSTALL_DATA} ${srcdir}/$$x $(DESTDIR)${tooldir}/lib/$$x; \
          done; \
          ${mkinstalldirs} ${DESTDIR}${tooldir}/include; \
          for i in ${srcdir}/include/*.h; do \
           ${INSTALL_DATA} $$i ${DESTDIR}${tooldir}/include/`basename $$i`; \
          done; \
          ${mkinstalldirs} ${DESTDIR}${tooldir}/include/sys; \
          for i in ${srcdir}/include/sys/*.h; do \
           ${INSTALL_DATA} $$i ${DESTDIR}${tooldir}/include/sys/`basename $$i`; \
          done; \
        else true; fi

doc:
info:
install-info:
clean-info:

Makefile: Makefile.in config.status @host_makefile_frag_path@
        $(SHELL) config.status

config.status: configure
        $(SHELL) config.status --recheck