URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [libgloss/] [bfin/] [include/] [defBF547.h] - Rev 158
Go to most recent revision | Compare with Previous | Blame | View Log
/* * The authors hereby grant permission to use, copy, modify, distribute, * and license this software and its documentation for any purpose, provided * that existing copyright notices are retained in all copies and that this * notice is included verbatim in any distributions. No written agreement, * license, or royalty fee is required for any of the authorized uses. * Modifications to this software may be copyrighted by their authors * and need not follow the licensing terms described here, provided that * the new terms are clearly indicated on the first page of each file where * they apply. */ /* ** defBF547.h ** ** Copyright (C) 2008 Analog Devices, Inc. ** ************************************************************************************ ** ** This include file contains a list of macro "defines" to enable the programmer ** to use symbolic names for register-access and bit-manipulation. ** **/ #ifndef _DEF_BF547_H #define _DEF_BF547_H /* Include all Core registers and bit definitions */ #include <def_LPBlackfin.h> /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF547 */ /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ #include <defBF54x_base.h> /* The following are the #defines needed by ADSP-BF547 that are not in the common header */ /* Timer Registers */ #define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ #define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ #define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ #define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ #define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ #define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ #define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ #define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ #define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ #define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ #define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ #define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ /* Timer Group of 3 Registers */ #define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ #define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ #define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ /* SPORT0 Registers */ #define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ #define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ #define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ #define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ #define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ #define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ #define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ #define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ #define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ #define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ #define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ #define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ #define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ #define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ #define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ #define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ #define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ #define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ #define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ #define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ #define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ #define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ /* EPPI0 Registers */ #define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ #define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ #define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ #define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ #define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ #define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ #define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ #define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ #define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ #define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ #define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ #define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ #define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ #define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ /* UART2 Registers */ #define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ #define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ #define UART2_GCTL 0xffc02108 /* Global Control Register */ #define UART2_LCR 0xffc0210c /* Line Control Register */ #define UART2_MCR 0xffc02110 /* Modem Control Register */ #define UART2_LSR 0xffc02114 /* Line Status Register */ #define UART2_MSR 0xffc02118 /* Modem Status Register */ #define UART2_SCR 0xffc0211c /* Scratch Register */ #define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ #define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ #define UART2_THR 0xffc02128 /* Transmit Hold Register */ #define UART2_RBR 0xffc0212c /* Receive Buffer Register */ /* Two Wire Interface Registers (TWI1) */ #define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ #define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ #define TWI1_SLAVE_CTL 0xffc02208 /* TWI Slave Mode Control Register */ #define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ #define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ #define TWI1_MASTER_CTL 0xffc02214 /* TWI Master Mode Control Register */ #define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ #define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ #define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ #define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ #define TWI1_FIFO_CTL 0xffc02228 /* TWI FIFO Control Register */ #define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ #define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ #define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ #define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ #define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ /* SPI2 Registers */ #define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ #define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ #define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ #define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ #define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ #define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ #define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ /* ATAPI Registers */ #define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ #define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ #define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ #define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ #define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ #define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ #define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ #define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ #define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ #define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ #define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ #define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ #define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ #define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ #define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ #define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ #define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ #define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ #define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ #define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ #define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ #define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ #define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ #define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ #define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ /* SDH Registers */ #define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ #define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ #define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ #define SDH_COMMAND 0xffc0390c /* SDH Command */ #define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ #define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ #define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ #define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ #define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ #define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ #define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ #define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ #define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ #define SDH_STATUS 0xffc03934 /* SDH Status */ #define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ #define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ #define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ #define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ #define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ #define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ #define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ #define SDH_CFG 0xffc039c8 /* SDH Configuration */ #define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ #define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ #define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ #define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ #define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ #define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ #define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ #define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ #define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ /* HOST Port Registers */ #define HOST_CONTROL 0xffc03a00 /* HOSTDP Control Register */ #define HOST_STATUS 0xffc03a04 /* HOSTDP Status Register */ #define HOST_TIMEOUT 0xffc03a08 /* HOSTDP Acknowledge Mode Timeout Register */ /* USB Control Registers */ #define USB_FADDR 0xffc03c00 /* Function address register */ #define USB_POWER 0xffc03c04 /* Power management register */ #define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ #define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ #define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ #define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ #define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ #define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ #define USB_FRAME 0xffc03c20 /* USB frame number */ #define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ #define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ #define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ #define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ /* USB Packet Control Registers */ #define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ #define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ #define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ #define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ #define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ #define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ #define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ #define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ #define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ #define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ #define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ #define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ #define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ /* USB Endpoint FIFO Registers */ #define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ #define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ #define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ #define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ #define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ #define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ #define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ #define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ /* USB OTG Control Registers */ #define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ #define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ #define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ /* USB Phy Control Registers */ #define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ #define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ #define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ #define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ #define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ /* (APHY_CNTRL is for ADI usage only) */ #define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ /* (APHY_CALIB is for ADI usage only) */ #define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ #define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ /* (PHY_TEST is for ADI usage only) */ #define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ #define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ #define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ /* USB Endpoint 0 Control Registers */ #define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ #define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ #define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ #define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ #define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ #define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ #define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ #define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ #define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ /* USB Endpoint 1 Control Registers */ #define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ #define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ #define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ #define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ #define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ #define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ #define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ #define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ #define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ #define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ /* USB Endpoint 2 Control Registers */ #define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ #define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ #define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ #define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ #define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ #define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ #define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ #define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ #define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ #define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ /* USB Endpoint 3 Control Registers */ #define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ #define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ #define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ #define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ #define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ #define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ #define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ #define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ #define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ #define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ /* USB Endpoint 4 Control Registers */ #define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ #define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ #define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ #define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ #define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ #define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ #define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ #define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ #define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ #define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ /* USB Endpoint 5 Control Registers */ #define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ #define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ #define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ #define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ #define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ #define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ #define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ #define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ #define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ #define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ /* USB Endpoint 6 Control Registers */ #define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ #define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ #define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ #define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ #define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ #define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ #define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ #define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ #define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ #define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ /* USB Endpoint 7 Control Registers */ #define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ #define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ #define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ #define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ #define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ #define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ #define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ #define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ #define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ #define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ #define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ #define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ /* USB Channel 0 Config Registers */ #define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ #define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ #define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ #define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ #define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ /* USB Channel 1 Config Registers */ #define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ #define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ #define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ #define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ #define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ /* USB Channel 2 Config Registers */ #define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ #define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ #define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ #define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ #define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ /* USB Channel 3 Config Registers */ #define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ #define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ #define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ #define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ #define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ /* USB Channel 4 Config Registers */ #define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ #define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ #define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ #define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ #define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ /* USB Channel 5 Config Registers */ #define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ #define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ #define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ #define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ #define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ /* USB Channel 6 Config Registers */ #define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ #define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ #define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ #define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ #define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ /* USB Channel 7 Config Registers */ #define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ #define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ #define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ #define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ #define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ /* Keypad Registers */ #define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ #define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ #define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ #define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ #define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ #define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ /* Pixel Compositor (PIXC) Registers */ #define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ #define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ #define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ #define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ #define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ #define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ #define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ #define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ #define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ #define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ #define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ #define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ #define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ #define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ #define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ #define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ #define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ #define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ #define PIXC_TC 0xffc04450 /* Holds the transparent color value */ /* ********************************************************** */ /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ /* and MULTI BIT READ MACROS */ /* ********************************************************** */ /* Bit masks for PIXC_CTL */ #define PIXC_EN 0x1 /* Pixel Compositor Enable */ #define nPIXC_EN 0x0 #define OVR_A_EN 0x2 /* Overlay A Enable */ #define nOVR_A_EN 0x0 #define OVR_B_EN 0x4 /* Overlay B Enable */ #define nOVR_B_EN 0x0 #define IMG_FORM 0x8 /* Image Data Format */ #define nIMG_FORM 0x0 #define OVR_FORM 0x10 /* Overlay Data Format */ #define nOVR_FORM 0x0 #define OUT_FORM 0x20 /* Output Data Format */ #define nOUT_FORM 0x0 #define UDS_MOD 0x40 /* Resampling Mode */ #define nUDS_MOD 0x0 #define TC_EN 0x80 /* Transparent Color Enable */ #define nTC_EN 0x0 #define IMG_STAT 0x300 /* Image FIFO Status */ #define OVR_STAT 0xc00 /* Overlay FIFO Status */ #define WM_LVL 0x3000 /* FIFO Watermark Level */ /* Bit masks for PIXC_AHSTART */ #define A_HSTART 0xfff /* Horizontal Start Coordinates */ /* Bit masks for PIXC_AHEND */ #define A_HEND 0xfff /* Horizontal End Coordinates */ /* Bit masks for PIXC_AVSTART */ #define A_VSTART 0x3ff /* Vertical Start Coordinates */ /* Bit masks for PIXC_AVEND */ #define A_VEND 0x3ff /* Vertical End Coordinates */ /* Bit masks for PIXC_ATRANSP */ #define A_TRANSP 0xf /* Transparency Value */ /* Bit masks for PIXC_BHSTART */ #define B_HSTART 0xfff /* Horizontal Start Coordinates */ /* Bit masks for PIXC_BHEND */ #define B_HEND 0xfff /* Horizontal End Coordinates */ /* Bit masks for PIXC_BVSTART */ #define B_VSTART 0x3ff /* Vertical Start Coordinates */ /* Bit masks for PIXC_BVEND */ #define B_VEND 0x3ff /* Vertical End Coordinates */ /* Bit masks for PIXC_BTRANSP */ #define B_TRANSP 0xf /* Transparency Value */ /* Bit masks for PIXC_INTRSTAT */ #define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ #define nOVR_INT_EN 0x0 #define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ #define nFRM_INT_EN 0x0 #define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ #define nOVR_INT_STAT 0x0 #define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ #define nFRM_INT_STAT 0x0 /* Bit masks for PIXC_RYCON */ #define A11 0x3ff /* A11 in the Coefficient Matrix */ #define A12 0xffc00 /* A12 in the Coefficient Matrix */ #define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ #define RY_MULT4 0x40000000 /* Multiply Row by 4 */ #define nRY_MULT4 0x0 /* Bit masks for PIXC_GUCON */ #define A21 0x3ff /* A21 in the Coefficient Matrix */ #define A22 0xffc00 /* A22 in the Coefficient Matrix */ #define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ #define GU_MULT4 0x40000000 /* Multiply Row by 4 */ #define nGU_MULT4 0x0 /* Bit masks for PIXC_BVCON */ #define A31 0x3ff /* A31 in the Coefficient Matrix */ #define A32 0xffc00 /* A32 in the Coefficient Matrix */ #define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ #define BV_MULT4 0x40000000 /* Multiply Row by 4 */ #define nBV_MULT4 0x0 /* Bit masks for PIXC_CCBIAS */ #define A14 0x3ff /* A14 in the Bias Vector */ #define A24 0xffc00 /* A24 in the Bias Vector */ #define A34 0x3ff00000 /* A34 in the Bias Vector */ /* Bit masks for PIXC_TC */ #define RY_TRANS 0xff /* Transparent Color - R/Y Component */ #define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ #define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ /* Bit masks for HOST_CONTROL */ #define HOSTDP_EN 0x1 /* HOSTDP Enable */ #define nHOSTDP_EN 0x0 #define HOSTDP_END 0x2 /* Host Endianess */ #define nHOSTDP_END 0x0 #define HOSTDP_DATA_SIZE 0x4 /* Data Size */ #define nHOSTDP_DATA_SIZE 0x0 #define HOSTDP_RST 0x8 /* HOSTDP Reset */ #define nHOSTDP_RST 0x0 #define HRDY_OVR 0x20 /* HRDY Override */ #define nHRDY_OVR 0x0 #define INT_MODE 0x40 /* Interrupt Mode */ #define nINT_MODE 0x0 #define BT_EN 0x80 /* Bus Timeout Enable */ #define nBT_EN 0x0 #define EHW 0x100 /* Enable Host Write */ #define nEHW 0x0 #define EHR 0x200 /* Enable Host Read */ #define nEHR 0x0 #define BDR 0x400 /* Burst DMA Requests */ #define nBDR 0x0 /* Bit masks for HOST_STATUS */ #define DMA_RDY 0x1 /* DMA Ready */ #define nDMA_RDY 0x0 #define FIFOFULL 0x2 /* FIFO Full */ #define nFIFOFULL 0x0 #define FIFOEMPTY 0x4 /* FIFO Empty */ #define nFIFOEMPTY 0x0 #define DMA_CMPLT 0x8 /* DMA Complete */ #define nDMA_CMPLT 0x0 #define HSHK 0x10 /* Host Handshake */ #define nHSHK 0x0 #define HOSTDP_TOUT 0x20 /* HOSTDP Timeout */ #define nHOSTDP_TOUT 0x0 #define HIRQ 0x40 /* Host Interrupt Request */ #define nHIRQ 0x0 #define ALLOW_CNFG 0x80 /* Allow New Configuration */ #define nALLOW_CNFG 0x0 #define DMA_DIR 0x100 /* DMA Direction */ #define nDMA_DIR 0x0 #define BTE 0x200 /* Bus Timeout Enabled */ #define nBTE 0x0 /* Bit masks for HOST_TIMEOUT */ #define COUNT_TIMEOUT 0x7ff /* HOSTDP Timeout count */ /* Bit masks for KPAD_CTL */ #define KPAD_EN 0x1 /* Keypad Enable */ #define nKPAD_EN 0x0 #define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ #define nKPAD_IRQMODE 0x0 /* Interrupt Disabled */ #define KPAD_IRQMODE_SK 0x2 /* Single key (single row, single column) press interrupt enable */ #define KPAD_IRQMODE_MK 0x4 /* Single key press multiple key press interrupt enable */ #define KPAD_ROWEN 0x1c00 /* Row Enable Width */ #define KPAD_COLEN 0xe000 /* Column Enable Width */ #define SET_KPAD_ROWEN(x) (((x)&0x7)<<10) /* 000: row 0 enabled, 111: rows 0-7 enabled */ #define SET_KPAD_COLEN(x) (((x)&0x7)<<13) /* 000: column 0 enabled, 111: columns 0-7 enabled */ /* Bit masks for KPAD_PRESCALE */ #define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ #define SET_KPAD_PRESCALE(x) ((x)&0x3F) /* KPAD_PRESCALE_VAL (Key Prescale). Key Prescale Value (5:0) */ /* Bit masks for KPAD_MSEL */ #define DBON_SCALE 0xff /* Debounce Scale Value */ #define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ #define SET_KPAD_DBON_SCALE(x) ((x)&0xFF) /* DBON_SCALE (Debounce Scale). Debounce Delay Multiplier Select [7:0] */ #define SET_KPAD_COLDRV_SCALE(x) (((x)&0xFF)<<8) /* COLDRV_SCALE (Column Driver Scale). Column Driver Period Multiplier Select [15:8] */ /* Bit masks for KPAD_ROWCOL */ #define KPAD_ROW 0xff /* Rows Pressed */ #define KPAD_COL 0xff00 /* Columns Pressed */ /* Bit masks for KPAD_STAT */ #define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ #define nKPAD_IRQ 0x0 #define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ #define KPAD_PRESSED 0x8 /* Key press current status */ #define nKPAD_PRESSED 0x0 #define KPAD_NO_KEY 0x0 /* No Keypress Status*/ #define KPAD_SINGLE_KEY 0x2 /* Single Keypress Status */ #define KPAD_MKSROWCOL 0x4 /* Multiple Keypress in the same row or column Status */ #define KPAD_MKMROWCOL 0x6 /* Multiple Keypress in the same multiple rows and multiple columns Status */ /* Bit masks for KPAD_SOFTEVAL */ #define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ #define nKPAD_SOFTEVAL_E 0x0 /* Bit masks for SDH_COMMAND */ #define CMD_IDX 0x3f /* Command Index */ #define CMD_RSP 0x40 /* Response */ #define nCMD_RSP 0x0 #define CMD_L_RSP 0x80 /* Long Response */ #define nCMD_L_RSP 0x0 #define CMD_INT_E 0x100 /* Command Interrupt */ #define nCMD_INT_E 0x0 #define CMD_PEND_E 0x200 /* Command Pending */ #define nCMD_PEND_E 0x0 #define CMD_E 0x400 /* Command Enable */ #define nCMD_E 0x0 /* Bit masks for SDH_PWR_CTL */ #define PWR_ON 0x3 /* Power On */ #if 0 #define TBD 0x3c /* TBD */ #endif #define SD_CMD_OD 0x40 /* Open Drain Output */ #define nSD_CMD_OD 0x0 #define ROD_CTL 0x80 /* Rod Control */ #define nROD_CTL 0x0 /* Bit masks for SDH_CLK_CTL */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ #define nCLK_E 0x0 #define PWR_SV_E 0x200 /* Power Save Enable */ #define nPWR_SV_E 0x0 #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ #define nCLKDIV_BYPASS 0x0 #define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ #define nWIDE_BUS 0x0 /* Bit masks for SDH_RESP_CMD */ #define RESP_CMD 0x3f /* Response Command */ /* Bit masks for SDH_DATA_CTL */ #define DTX_E 0x1 /* Data Transfer Enable */ #define nDTX_E 0x0 #define DTX_DIR 0x2 /* Data Transfer Direction */ #define nDTX_DIR 0x0 #define DTX_MODE 0x4 /* Data Transfer Mode */ #define nDTX_MODE 0x0 #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ #define nDTX_DMA_E 0x0 #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ /* Bit masks for SDH_STATUS */ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ #define nCMD_CRC_FAIL 0x0 #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ #define nDAT_CRC_FAIL 0x0 #define CMD_TIMEOUT 0x4 /* CMD Time Out */ #define nCMD_TIMEOUT 0x0 #define DAT_TIMEOUT 0x8 /* Data Time Out */ #define nDAT_TIMEOUT 0x0 #define TX_UNDERRUN 0x10 /* Transmit Underrun */ #define nTX_UNDERRUN 0x0 #define RX_OVERRUN 0x20 /* Receive Overrun */ #define nRX_OVERRUN 0x0 #define CMD_RESP_END 0x40 /* CMD Response End */ #define nCMD_RESP_END 0x0 #define CMD_SENT 0x80 /* CMD Sent */ #define nCMD_SENT 0x0 #define DAT_END 0x100 /* Data End */ #define nDAT_END 0x0 #define START_BIT_ERR 0x200 /* Start Bit Error */ #define nSTART_BIT_ERR 0x0 #define DAT_BLK_END 0x400 /* Data Block End */ #define nDAT_BLK_END 0x0 #define CMD_ACT 0x800 /* CMD Active */ #define nCMD_ACT 0x0 #define TX_ACT 0x1000 /* Transmit Active */ #define nTX_ACT 0x0 #define RX_ACT 0x2000 /* Receive Active */ #define nRX_ACT 0x0 #define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ #define nTX_FIFO_STAT 0x0 #define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ #define nRX_FIFO_STAT 0x0 #define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ #define nTX_FIFO_FULL 0x0 #define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ #define nRX_FIFO_FULL 0x0 #define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ #define nTX_FIFO_ZERO 0x0 #define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ #define nRX_DAT_ZERO 0x0 #define TX_DAT_RDY 0x100000 /* Transmit Data Available */ #define nTX_DAT_RDY 0x0 #define RX_FIFO_RDY 0x200000 /* Receive Data Available */ #define nRX_FIFO_RDY 0x0 /* Bit masks for SDH_STATUS_CLR */ #define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ #define nCMD_CRC_FAIL_STAT 0x0 #define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ #define nDAT_CRC_FAIL_STAT 0x0 #define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ #define nCMD_TIMEOUT_STAT 0x0 #define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ #define nDAT_TIMEOUT_STAT 0x0 #define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ #define nTX_UNDERRUN_STAT 0x0 #define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ #define nRX_OVERRUN_STAT 0x0 #define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ #define nCMD_RESP_END_STAT 0x0 #define CMD_SENT_STAT 0x80 /* CMD Sent Status */ #define nCMD_SENT_STAT 0x0 #define DAT_END_STAT 0x100 /* Data End Status */ #define nDAT_END_STAT 0x0 #define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ #define nSTART_BIT_ERR_STAT 0x0 #define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ #define nDAT_BLK_END_STAT 0x0 /* Bit masks for SDH_MASK0 */ #define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ #define nCMD_CRC_FAIL_MASK 0x0 #define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ #define nDAT_CRC_FAIL_MASK 0x0 #define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ #define nCMD_TIMEOUT_MASK 0x0 #define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ #define nDAT_TIMEOUT_MASK 0x0 #define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ #define nTX_UNDERRUN_MASK 0x0 #define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ #define nRX_OVERRUN_MASK 0x0 #define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ #define nCMD_RESP_END_MASK 0x0 #define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ #define nCMD_SENT_MASK 0x0 #define DAT_END_MASK 0x100 /* Data End Mask */ #define nDAT_END_MASK 0x0 #define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ #define nSTART_BIT_ERR_MASK 0x0 #define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ #define nDAT_BLK_END_MASK 0x0 #define CMD_ACT_MASK 0x800 /* CMD Active Mask */ #define nCMD_ACT_MASK 0x0 #define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ #define nTX_ACT_MASK 0x0 #define RX_ACT_MASK 0x2000 /* Receive Active Mask */ #define nRX_ACT_MASK 0x0 #define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ #define nTX_FIFO_STAT_MASK 0x0 #define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ #define nRX_FIFO_STAT_MASK 0x0 #define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ #define nTX_FIFO_FULL_MASK 0x0 #define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ #define nRX_FIFO_FULL_MASK 0x0 #define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ #define nTX_FIFO_ZERO_MASK 0x0 #define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ #define nRX_DAT_ZERO_MASK 0x0 #define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ #define nTX_DAT_RDY_MASK 0x0 #define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ #define nRX_FIFO_RDY_MASK 0x0 /* Bit masks for SDH_FIFO_CNT */ #define FIFO_COUNT 0x7fff /* FIFO Count */ /* Bit masks for SDH_E_STATUS */ #define SDIO_INT_DET 0x2 /* SDIO Int Detected */ #define nSDIO_INT_DET 0x0 #define SD_CARD_DET 0x10 /* SD Card Detect */ #define nSD_CARD_DET 0x0 /* Bit masks for SDH_E_MASK */ #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ #define nSDIO_MSK 0x0 #define SCD_MSK 0x40 /* Mask Card Detect */ #define nSCD_MSK 0x0 /* Bit masks for SDH_CFG */ #define CLKS_EN 0x1 /* Clocks Enable */ #define nCLKS_EN 0x0 #define SD4E 0x4 /* SDIO 4-Bit Enable */ #define nSD4E 0x0 #define MWE 0x8 /* Moving Window Enable */ #define nMWE 0x0 #define SD_RST 0x10 /* SDMMC Reset */ #define nSD_RST 0x0 #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ #define nPUP_SDDAT 0x0 #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ #define nPUP_SDDAT3 0x0 #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ #define nPD_SDDAT3 0x0 /* Bit masks for SDH_RD_WAIT_EN */ #define RWR 0x1 /* Read Wait Request */ #define nRWR 0x0 /* Bit masks for ATAPI_CONTROL */ #define PIO_START 0x1 /* Start PIO/Reg Op */ #define nPIO_START 0x0 #define MULTI_START 0x2 /* Start Multi-DMA Op */ #define nMULTI_START 0x0 #define ULTRA_START 0x4 /* Start Ultra-DMA Op */ #define nULTRA_START 0x0 #define XFER_DIR 0x8 /* Transfer Direction */ #define nXFER_DIR 0x0 #define IORDY_EN 0x10 /* IORDY Enable */ #define nIORDY_EN 0x0 #define FIFO_FLUSH 0x20 /* Flush FIFOs */ #define nFIFO_FLUSH 0x0 #define SOFT_RST 0x40 /* Soft Reset */ #define nSOFT_RST 0x0 #define DEV_RST 0x80 /* Device Reset */ #define nDEV_RST 0x0 #define TFRCNT_RST 0x100 /* Trans Count Reset */ #define nTFRCNT_RST 0x0 #define END_ON_TERM 0x200 /* End/Terminate Select */ #define nEND_ON_TERM 0x0 #define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ #define nPIO_USE_DMA 0x0 #define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ /* Bit masks for ATAPI_STATUS */ #define PIO_XFER_ON 0x1 /* PIO transfer in progress */ #define nPIO_XFER_ON 0x0 #define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ #define nMULTI_XFER_ON 0x0 #define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ #define nULTRA_XFER_ON 0x0 #define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ /* Bit masks for ATAPI_DEV_ADDR */ #define DEV_ADDR 0x1f /* Device Address */ /* Bit masks for ATAPI_INT_MASK */ #define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ #define nATAPI_DEV_INT_MASK 0x0 #define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ #define nPIO_DONE_MASK 0x0 #define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ #define nMULTI_DONE_MASK 0x0 #define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ #define nUDMAIN_DONE_MASK 0x0 #define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ #define nUDMAOUT_DONE_MASK 0x0 #define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ #define nHOST_TERM_XFER_MASK 0x0 #define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ #define nMULTI_TERM_MASK 0x0 #define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ #define nUDMAIN_TERM_MASK 0x0 #define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ #define nUDMAOUT_TERM_MASK 0x0 /* Bit masks for ATAPI_INT_STATUS */ #define ATAPI_DEV_INT 0x1 /* Device interrupt status */ #define nATAPI_DEV_INT 0x0 #define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ #define nPIO_DONE_INT 0x0 #define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ #define nMULTI_DONE_INT 0x0 #define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ #define nUDMAIN_DONE_INT 0x0 #define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ #define nUDMAOUT_DONE_INT 0x0 #define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ #define nHOST_TERM_XFER_INT 0x0 #define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ #define nMULTI_TERM_INT 0x0 #define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ #define nUDMAIN_TERM_INT 0x0 #define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ #define nUDMAOUT_TERM_INT 0x0 /* Bit masks for ATAPI_LINE_STATUS */ #define ATAPI_INTR 0x1 /* Device interrupt to host line status */ #define nATAPI_INTR 0x0 #define ATAPI_DASP 0x2 /* Device dasp to host line status */ #define nATAPI_DASP 0x0 #define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ #define nATAPI_CS0N 0x0 #define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ #define nATAPI_CS1N 0x0 #define ATAPI_ADDR 0x70 /* ATAPI address line status */ #define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ #define nATAPI_DMAREQ 0x0 #define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ #define nATAPI_DMAACKN 0x0 #define ATAPI_DIOWN 0x200 /* ATAPI write line status */ #define nATAPI_DIOWN 0x0 #define ATAPI_DIORN 0x400 /* ATAPI read line status */ #define nATAPI_DIORN 0x0 #define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ #define nATAPI_IORDY 0x0 /* Bit masks for ATAPI_SM_STATE */ #define PIO_CSTATE 0xf /* PIO mode state machine current state */ #define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ #define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ #define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ /* Bit masks for ATAPI_TERMINATE */ #define ATAPI_HOST_TERM 0x1 /* Host terminationation */ #define nATAPI_HOST_TERM 0x0 /* Bit masks for ATAPI_REG_TIM_0 */ #define T2_REG 0xff /* End of cycle time for register access transfers */ #define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ /* Bit masks for ATAPI_PIO_TIM_0 */ #define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ #define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ #define T4_REG 0xf000 /* DIOW data hold */ /* Bit masks for ATAPI_PIO_TIM_1 */ #define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ /* Bit masks for ATAPI_MULTI_TIM_0 */ #define TD 0xff /* DIOR/DIOW asserted pulsewidth */ #define TM 0xff00 /* Time from address valid to DIOR/DIOW */ /* Bit masks for ATAPI_MULTI_TIM_1 */ #define TKW 0xff /* Selects DIOW negated pulsewidth */ #define TKR 0xff00 /* Selects DIOR negated pulsewidth */ /* Bit masks for ATAPI_MULTI_TIM_2 */ #define TH 0xff /* Selects DIOW data hold */ #define TEOC 0xff00 /* Selects end of cycle for DMA */ /* Bit masks for ATAPI_ULTRA_TIM_0 */ #define TACK 0xff /* Selects setup and hold times for TACK */ #define TENV 0xff00 /* Selects envelope time */ /* Bit masks for ATAPI_ULTRA_TIM_1 */ #define TDVS 0xff /* Selects data valid setup time */ #define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ /* Bit masks for ATAPI_ULTRA_TIM_2 */ #define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ #define TMLI 0xff00 /* Selects interlock time */ /* Bit masks for ATAPI_ULTRA_TIM_3 */ #define TZAH 0xff /* Selects minimum delay required for output */ #define READY_PAUSE 0xff00 /* Selects ready to pause */ /* Bit masks for TIMER_ENABLE1 */ #define TIMEN8 0x1 /* Timer 8 Enable */ #define nTIMEN8 0x0 #define TIMEN9 0x2 /* Timer 9 Enable */ #define nTIMEN9 0x0 #define TIMEN10 0x4 /* Timer 10 Enable */ #define nTIMEN10 0x0 /* Bit masks for TIMER_DISABLE1 */ #define TIMDIS8 0x1 /* Timer 8 Disable */ #define nTIMDIS8 0x0 #define TIMDIS9 0x2 /* Timer 9 Disable */ #define nTIMDIS9 0x0 #define TIMDIS10 0x4 /* Timer 10 Disable */ #define nTIMDIS10 0x0 /* Bit masks for TIMER_STATUS1 */ #define TIMIL8 0x1 /* Timer 8 Interrupt */ #define nTIMIL8 0x0 #define TIMIL9 0x2 /* Timer 9 Interrupt */ #define nTIMIL9 0x0 #define TIMIL10 0x4 /* Timer 10 Interrupt */ #define nTIMIL10 0x0 #define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ #define nTOVF_ERR8 0x0 #define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ #define nTOVF_ERR9 0x0 #define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ #define nTOVF_ERR10 0x0 #define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ #define nTRUN8 0x0 #define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ #define nTRUN9 0x0 #define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ #define nTRUN10 0x0 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ /* Bit masks for USB_FADDR */ #define FUNCTION_ADDRESS 0x7f /* Function address */ /* Bit masks for USB_POWER */ #define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ #define nENABLE_SUSPENDM 0x0 #define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ #define nSUSPEND_MODE 0x0 #define RESUME_MODE 0x4 /* DMA Mode */ #define nRESUME_MODE 0x0 #define RESET 0x8 /* Reset indicator */ #define nRESET 0x0 #define HS_MODE 0x10 /* High Speed mode indicator */ #define nHS_MODE 0x0 #define HS_ENABLE 0x20 /* high Speed Enable */ #define nHS_ENABLE 0x0 #define SOFT_CONN 0x40 /* Soft connect */ #define nSOFT_CONN 0x0 #define ISO_UPDATE 0x80 /* Isochronous update */ #define nISO_UPDATE 0x0 /* Bit masks for USB_INTRTX */ #define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ #define nEP0_TX 0x0 #define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ #define nEP1_TX 0x0 #define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ #define nEP2_TX 0x0 #define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ #define nEP3_TX 0x0 #define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ #define nEP4_TX 0x0 #define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ #define nEP5_TX 0x0 #define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ #define nEP6_TX 0x0 #define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ #define nEP7_TX 0x0 /* Bit masks for USB_INTRRX */ #define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ #define nEP1_RX 0x0 #define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ #define nEP2_RX 0x0 #define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ #define nEP3_RX 0x0 #define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ #define nEP4_RX 0x0 #define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ #define nEP5_RX 0x0 #define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ #define nEP6_RX 0x0 #define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ #define nEP7_RX 0x0 /* Bit masks for USB_INTRTXE */ #define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ #define nEP0_TX_E 0x0 #define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ #define nEP1_TX_E 0x0 #define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ #define nEP2_TX_E 0x0 #define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ #define nEP3_TX_E 0x0 #define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ #define nEP4_TX_E 0x0 #define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ #define nEP5_TX_E 0x0 #define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ #define nEP6_TX_E 0x0 #define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ #define nEP7_TX_E 0x0 /* Bit masks for USB_INTRRXE */ #define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ #define nEP1_RX_E 0x0 #define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ #define nEP2_RX_E 0x0 #define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ #define nEP3_RX_E 0x0 #define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ #define nEP4_RX_E 0x0 #define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ #define nEP5_RX_E 0x0 #define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ #define nEP6_RX_E 0x0 #define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ #define nEP7_RX_E 0x0 /* Bit masks for USB_INTRUSB */ #define SUSPEND_B 0x1 /* Suspend indicator */ #define nSUSPEND_B 0x0 #define RESUME_B 0x2 /* Resume indicator */ #define nRESUME_B 0x0 #define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ #define nRESET_OR_BABLE_B 0x0 #define SOF_B 0x8 /* Start of frame */ #define nSOF_B 0x0 #define CONN_B 0x10 /* Connection indicator */ #define nCONN_B 0x0 #define DISCON_B 0x20 /* Disconnect indicator */ #define nDISCON_B 0x0 #define SESSION_REQ_B 0x40 /* Session Request */ #define nSESSION_REQ_B 0x0 #define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ #define nVBUS_ERROR_B 0x0 /* Bit masks for USB_INTRUSBE */ #define SUSPEND_BE 0x1 /* Suspend indicator int enable */ #define nSUSPEND_BE 0x0 #define RESUME_BE 0x2 /* Resume indicator int enable */ #define nRESUME_BE 0x0 #define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ #define nRESET_OR_BABLE_BE 0x0 #define SOF_BE 0x8 /* Start of frame int enable */ #define nSOF_BE 0x0 #define CONN_BE 0x10 /* Connection indicator int enable */ #define nCONN_BE 0x0 #define DISCON_BE 0x20 /* Disconnect indicator int enable */ #define nDISCON_BE 0x0 #define SESSION_REQ_BE 0x40 /* Session Request int enable */ #define nSESSION_REQ_BE 0x0 #define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ #define nVBUS_ERROR_BE 0x0 /* Bit masks for USB_FRAME */ #define FRAME_NUMBER 0x7ff /* Frame number */ /* Bit masks for USB_INDEX */ #define SELECTED_ENDPOINT 0xf /* selected endpoint */ /* Bit masks for USB_GLOBAL_CTL */ #define GLOBAL_ENA 0x1 /* enables USB module */ #define nGLOBAL_ENA 0x0 #define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ #define nEP1_TX_ENA 0x0 #define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ #define nEP2_TX_ENA 0x0 #define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ #define nEP3_TX_ENA 0x0 #define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ #define nEP4_TX_ENA 0x0 #define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ #define nEP5_TX_ENA 0x0 #define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ #define nEP6_TX_ENA 0x0 #define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ #define nEP7_TX_ENA 0x0 #define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ #define nEP1_RX_ENA 0x0 #define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ #define nEP2_RX_ENA 0x0 #define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ #define nEP3_RX_ENA 0x0 #define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ #define nEP4_RX_ENA 0x0 #define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ #define nEP5_RX_ENA 0x0 #define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ #define nEP6_RX_ENA 0x0 #define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ #define nEP7_RX_ENA 0x0 /* Bit masks for USB_OTG_DEV_CTL */ #define SESSION 0x1 /* session indicator */ #define nSESSION 0x0 #define HOST_REQ 0x2 /* Host negotiation request */ #define nHOST_REQ 0x0 #define HOST_MODE 0x4 /* indicates USBDRC is a host */ #define nHOST_MODE 0x0 #define VBUS0 0x8 /* Vbus level indicator[0] */ #define nVBUS0 0x0 #define VBUS1 0x10 /* Vbus level indicator[1] */ #define nVBUS1 0x0 #define LSDEV 0x20 /* Low-speed indicator */ #define nLSDEV 0x0 #define FSDEV 0x40 /* Full or High-speed indicator */ #define nFSDEV 0x0 #define B_DEVICE 0x80 /* A' or 'B' device indicator */ #define nB_DEVICE 0x0 /* Bit masks for USB_OTG_VBUS_IRQ */ #define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ #define nDRIVE_VBUS_ON 0x0 #define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ #define nDRIVE_VBUS_OFF 0x0 #define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ #define nCHRG_VBUS_START 0x0 #define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ #define nCHRG_VBUS_END 0x0 #define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ #define nDISCHRG_VBUS_START 0x0 #define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ #define nDISCHRG_VBUS_END 0x0 /* Bit masks for USB_OTG_VBUS_MASK */ #define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ #define nDRIVE_VBUS_ON_ENA 0x0 #define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ #define nDRIVE_VBUS_OFF_ENA 0x0 #define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ #define nCHRG_VBUS_START_ENA 0x0 #define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ #define nCHRG_VBUS_END_ENA 0x0 #define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ #define nDISCHRG_VBUS_START_ENA 0x0 #define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ #define nDISCHRG_VBUS_END_ENA 0x0 /* Bit masks for USB_CSR0 */ #define RXPKTRDY 0x1 /* data packet receive indicator */ #define nRXPKTRDY 0x0 #define TXPKTRDY 0x2 /* data packet in FIFO indicator */ #define nTXPKTRDY 0x0 #define STALL_SENT 0x4 /* STALL handshake sent */ #define nSTALL_SENT 0x0 #define DATAEND 0x8 /* Data end indicator */ #define nDATAEND 0x0 #define SETUPEND 0x10 /* Setup end */ #define nSETUPEND 0x0 #define SENDSTALL 0x20 /* Send STALL handshake */ #define nSENDSTALL 0x0 #define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ #define nSERVICED_RXPKTRDY 0x0 #define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ #define nSERVICED_SETUPEND 0x0 #define FLUSHFIFO 0x100 /* flush endpoint FIFO */ #define nFLUSHFIFO 0x0 #define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ #define nSTALL_RECEIVED_H 0x0 #define SETUPPKT_H 0x8 /* send Setup token host mode */ #define nSETUPPKT_H 0x0 #define ERROR_H 0x10 /* timeout error indicator host mode */ #define nERROR_H 0x0 #define REQPKT_H 0x20 /* Request an IN transaction host mode */ #define nREQPKT_H 0x0 #define STATUSPKT_H 0x40 /* Status stage transaction host mode */ #define nSTATUSPKT_H 0x0 #define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ #define nNAK_TIMEOUT_H 0x0 /* Bit masks for USB_COUNT0 */ #define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ /* Bit masks for USB_NAKLIMIT0 */ #define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ /* Bit masks for USB_TX_MAX_PACKET */ #define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ /* Bit masks for USB_RX_MAX_PACKET */ #define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ /* Bit masks for USB_TXCSR */ #define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ #define nTXPKTRDY_T 0x0 #define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ #define nFIFO_NOT_EMPTY_T 0x0 #define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ #define nUNDERRUN_T 0x0 #define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ #define nFLUSHFIFO_T 0x0 #define STALL_SEND_T 0x10 /* issue a Stall handshake */ #define nSTALL_SEND_T 0x0 #define STALL_SENT_T 0x20 /* Stall handshake transmitted */ #define nSTALL_SENT_T 0x0 #define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ #define nCLEAR_DATATOGGLE_T 0x0 #define INCOMPTX_T 0x80 /* indicates that a large packet is split */ #define nINCOMPTX_T 0x0 #define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ #define nDMAREQMODE_T 0x0 #define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ #define nFORCE_DATATOGGLE_T 0x0 #define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ #define nDMAREQ_ENA_T 0x0 #define ISO_T 0x4000 /* enable Isochronous transfers */ #define nISO_T 0x0 #define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ #define nAUTOSET_T 0x0 #define ERROR_TH 0x4 /* error condition host mode */ #define nERROR_TH 0x0 #define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ #define nSTALL_RECEIVED_TH 0x0 #define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ #define nNAK_TIMEOUT_TH 0x0 /* Bit masks for USB_TXCOUNT */ #define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ /* Bit masks for USB_RXCSR */ #define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ #define nRXPKTRDY_R 0x0 #define FIFO_FULL_R 0x2 /* FIFO not empty */ #define nFIFO_FULL_R 0x0 #define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ #define nOVERRUN_R 0x0 #define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ #define nDATAERROR_R 0x0 #define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ #define nFLUSHFIFO_R 0x0 #define STALL_SEND_R 0x20 /* issue a Stall handshake */ #define nSTALL_SEND_R 0x0 #define STALL_SENT_R 0x40 /* Stall handshake transmitted */ #define nSTALL_SENT_R 0x0 #define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ #define nCLEAR_DATATOGGLE_R 0x0 #define INCOMPRX_R 0x100 /* indicates that a large packet is split */ #define nINCOMPRX_R 0x0 #define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ #define nDMAREQMODE_R 0x0 #define DISNYET_R 0x1000 /* disable Nyet handshakes */ #define nDISNYET_R 0x0 #define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ #define nDMAREQ_ENA_R 0x0 #define ISO_R 0x4000 /* enable Isochronous transfers */ #define nISO_R 0x0 #define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ #define nAUTOCLEAR_R 0x0 #define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ #define nERROR_RH 0x0 #define REQPKT_RH 0x20 /* request an IN transaction host mode */ #define nREQPKT_RH 0x0 #define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ #define nSTALL_RECEIVED_RH 0x0 #define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ #define nINCOMPRX_RH 0x0 #define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ #define nDMAREQMODE_RH 0x0 #define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ #define nAUTOREQ_RH 0x0 /* Bit masks for USB_RXCOUNT */ #define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ /* Bit masks for USB_TXTYPE */ #define TARGET_EP_NO_T 0xf /* EP number */ #define PROTOCOL_T 0xc /* transfer type */ /* Bit masks for USB_TXINTERVAL */ #define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ /* Bit masks for USB_RXTYPE */ #define TARGET_EP_NO_R 0xf /* EP number */ #define PROTOCOL_R 0xc /* transfer type */ /* Bit masks for USB_RXINTERVAL */ #define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ /* Bit masks for USB_DMA_INTERRUPT */ #define DMA0_INT 0x1 /* DMA0 pending interrupt */ #define nDMA0_INT 0x0 #define DMA1_INT 0x2 /* DMA1 pending interrupt */ #define nDMA1_INT 0x0 #define DMA2_INT 0x4 /* DMA2 pending interrupt */ #define nDMA2_INT 0x0 #define DMA3_INT 0x8 /* DMA3 pending interrupt */ #define nDMA3_INT 0x0 #define DMA4_INT 0x10 /* DMA4 pending interrupt */ #define nDMA4_INT 0x0 #define DMA5_INT 0x20 /* DMA5 pending interrupt */ #define nDMA5_INT 0x0 #define DMA6_INT 0x40 /* DMA6 pending interrupt */ #define nDMA6_INT 0x0 #define DMA7_INT 0x80 /* DMA7 pending interrupt */ #define nDMA7_INT 0x0 /* Bit masks for USB_DMAxCONTROL */ #define DMA_ENA 0x1 /* DMA enable */ #define nDMA_ENA 0x0 #define DIRECTION 0x2 /* direction of DMA transfer */ #define nDIRECTION 0x0 #define MODE 0x4 /* DMA Bus error */ #define nMODE 0x0 #define INT_ENA 0x8 /* Interrupt enable */ #define nINT_ENA 0x0 #define EPNUM 0xf0 /* EP number */ #define BUSERROR 0x100 /* DMA Bus error */ #define nBUSERROR 0x0 /* Bit masks for USB_DMAxADDRHIGH */ #define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ /* Bit masks for USB_DMAxADDRLOW */ #define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ /* Bit masks for USB_DMAxCOUNTHIGH */ #define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ /* Bit masks for USB_DMAxCOUNTLOW */ #define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ /* ******************************************* */ /* MULTI BIT MACRO ENUMERATIONS */ /* ******************************************* */ #endif /* _DEF_BF547_H */
Go to most recent revision | Compare with Previous | Blame | View Log