URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [libgloss/] [or32/] [Makefile.in] - Rev 844
Go to most recent revision | Compare with Previous | Blame | View Log
# Makefile.in. Autoconf input makefile.
# Copyright (c) 1998 Cygnus Support
# Copyright (C) 2004, Jacob Bower
# Copyright (C) 2010, Embecosm Limited <info@embecosm.com>
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
# This file is part of Newlib.
# The original work by Jacob Bower is provided as-is without any kind of
# warranty. Use it at your own risk!
# All subsequent work is bound by version 3 of the GPL as follows.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http:#www.gnu.org/licenses/>.
DESTDIR =
VPATH = @srcdir@ @srcdir@/..
srcdir = @srcdir@
objdir = .
srcroot = $(srcdir)/../..
objroot = $(objdir)/../..
prefix = @prefix@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
target_alias = @target_alias@
bindir = @bindir@
libdir = @libdir@
tooldir = $(exec_prefix)/$(target_alias)
# Multilib support variables.
# TOP is used instead of MULTI{BUILD,SRC}TOP.
MULTIDIRS =
MULTISUBDIR =
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
SHELL = /bin/sh
CC = @CC@
AS = @AS@
AR = @AR@
LD = @LD@
RANLIB = @RANLIB@
OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
then echo ${objroot}/../binutils/objdump ; \
else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
then echo ${objroot}/../binutils/objcopy ; \
else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`
# Add our own flags for C compilation
CFLAGS = -g
# Our own C runtime startup and BSPs
CRT0 = crt0.o
BSP = libor32.a
BSP_UART = libor32uart.a
OUTPUTS = $(CRT0) $(BSP) $(BSP_UART)
# The object files for each BSP
OBJS = _exit.o \
close.o \
environ.o \
execve.o \
fork.o \
fstat.o \
getpid.o \
isatty.o \
kill.o \
link.o \
lseek.o \
open.o \
read.o \
sbrk.o \
stat.o \
times.o \
uart-dummy.o \
unlink.o \
wait.o \
write.o
UART_OBJS = _exit.o \
close.o \
environ.o \
execve.o \
fork.o \
fstat-uart.o \
getpid.o \
isatty-uart.o \
kill.o \
link.o \
lseek-uart.o \
open.o \
read-uart.o \
sbrk.o \
stat.o \
times.o \
uart.o \
unlink.o \
wait.o \
write-uart.o
# Host specific makefile fragment specifies the automatic rules
@host_makefile_frag@
# Build crt0.o and all the BSPs
all: ${CRT0} ${BSP} ${BSP_UART}
# Rules to build the BSPs from their objects. No need for a rule to build
# crt0.o, that happens autmatically from .S
$(BSP): $(OBJS)
${AR} ${ARFLAGS} $@ $(OBJS)
${RANLIB} $@
$(BSP_UART): $(UART_OBJS)
${AR} ${ARFLAGS} $@ $(UART_OBJS)
${RANLIB} $@
# Standard clean up rules.
clean mostlyclean:
rm -f $(OUTPUTS) *.i *~ *.o *-test *.srec *.dis *.map *.x
distclean maintainer-clean realclean: clean
rm -f Makefile config.status *~
# Standard install rules
.PHONY: install info install-info clean-info
install:
@for outputs in ${OUTPUTS}; do\
mkdir -p $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}; \
$(INSTALL_PROGRAM) $${outputs} \
$(DESTDIR)$(tooldir)/lib${MULTISUBDIR}; \
done
# Deal with info if we had any.
info:
install-info:
clean-info:
# Standard make and configure dependencies.
Makefile: Makefile.in config.status @host_makefile_frag_path@
$(SHELL) config.status
config.status: configure
$(SHELL) config.status --recheck
Go to most recent revision | Compare with Previous | Blame | View Log