OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [libgloss/] [or32/] [or1ksim-board.h] - Rev 832

Go to most recent revision | Compare with Previous | Blame | View Log

/* Newlib board descriptions for Or1ksim
 
   Copyright (C)
   Copyright (C) 2008, 2010 Embecosm Limited
 
   Contributor
   Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
 
   This file is part of Newlib.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the Free
   Software Foundation; either version 3 of the License, or (at your option)
   any later version.
 
   This program is distributed in the hope that it will be useful, but WITHOUT
   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
   more details.
 
   You should have received a copy of the GNU General Public License along
   with this program.  If not, see <http://www.gnu.org/licenses/>.            */
/* -------------------------------------------------------------------------- */
/* This program is commented throughout in a fashion suitable for processing
   with Doxygen.                                                              */
/* -------------------------------------------------------------------------- */
 
/* This machine configuration matches the Or1ksim configuration file in this
   directory. */
 
#ifndef OR1KSIM_BOARD__H
#define OR1KSIM_BOARD__H
 
/* Cache information */
#define IC_ENABLE 	    1
#define IC_SIZE          4096
 
#define DC_ENABLE 	    0
#define DC_SIZE          8192
 
#define SDRAM_BASE_ADDR 0x00000000
#define SDRAM_TMS_VAL   0x07248230
 
/* UART information */
#define IN_CLK  	  25000000	/*!< 25 MHz */
#define UART_BAUD_RATE 	    115200	/*!< 115.2 kHz */
 
#define UART_BASE  	0x90000000
#define UART_IRQ                19
 
/* l.nop constants */
#define NOP_EXIT        0x0001      /*!< End of simulation */
#define NOP_PUTC        0x0004      /*!< Put a character */
 
/*! Define UART_AUTO_ECHO to have the UART echo reads. */
#undef UART_AUTO_ECHO
 
/*! 8-bit register access macro */
#define REG8(add) *((volatile unsigned char *) (add))
 
#endif	/* OR1KSIM_BOARD__H */
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.