URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [libgloss/] [sparc/] [erc32-stub.c] - Rev 866
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Copyright (c) 1996 Cygnus Support * * The authors hereby grant permission to use, copy, modify, distribute, * and license this software and its documentation for any purpose, provided * that existing copyright notices are retained in all copies and that this * notice is included verbatim in any distributions. No written agreement, * license, or royalty fee is required for any of the authorized uses. * Modifications to this software may be copyrighted by their authors * and need not follow the licensing terms described here, provided that * the new terms are clearly indicated on the first page of each file where * they apply. */ #include <string.h> #include <signal.h> #include "debug.h" #include "asm.h" #include "slite.h" extern unsigned long rdtbr(); extern struct trap_entry fltr_proto; extern void trap_low(); exception_t default_trap_hook = trap_low; void target_reset(); void flush_i_cache(); char *target_read_registers(unsigned long *); char *target_write_registers(unsigned long *); char *target_dump_state(unsigned long *); #define NUMREGS 72 /* Number of bytes of registers. */ #define NUMREGBYTES (NUMREGS * 4) enum regnames {G0, G1, G2, G3, G4, G5, G6, G7, O0, O1, O2, O3, O4, O5, SP, O7, L0, L1, L2, L3, L4, L5, L6, L7, I0, I1, I2, I3, I4, I5, FP, I7, F0, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, F25, F26, F27, F28, F29, F30, F31, Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR }; /* * Each entry in the trap vector occupies four words, typically a jump * to the processing routine. */ struct trap_entry { unsigned sethi_filler:10; unsigned sethi_imm22:22; unsigned jmpl_filler:19; unsigned jmpl_simm13:13; unsigned long filler[2]; }; /* * This table contains the mapping between SPARC hardware trap types, and * signals, which are primarily what GDB understands. It also indicates * which hardware traps we need to commandeer when initializing the stub. */ struct trap_info hard_trap_info[] = { {1, SIGSEGV}, /* instruction access error */ {2, SIGILL}, /* privileged instruction */ {3, SIGILL}, /* illegal instruction */ {4, SIGEMT}, /* fp disabled */ {36, SIGEMT}, /* cp disabled */ {7, SIGBUS}, /* mem address not aligned */ {9, SIGSEGV}, /* data access exception */ {10, SIGEMT}, /* tag overflow */ {128+1, SIGTRAP}, /* ta 1 - normal breakpoint instruction */ {0, 0} /* Must be last */ }; extern struct trap_entry fltr_proto; void exception_handler (int tt, unsigned long routine) { struct trap_entry *tb; /* Trap vector base address */ DEBUG (1, "Entering exception_handler()"); if (tt != 256) { tb = (struct trap_entry *) (rdtbr() & ~0xfff); } else { tt = 255; tb = (struct trap_entry *) 0; } tb[tt] = fltr_proto; tb[tt].sethi_imm22 = routine >> 10; tb[tt].jmpl_simm13 = routine & 0x3ff; DEBUG (1, "Leaving exception_handler()"); } /* * This is so we can trap a memory fault when reading or writing * directly to memory. */ void set_mem_fault_trap(enable) int enable; { extern void fltr_set_mem_err(); DEBUG (1, "Entering set_mem_fault_trap()"); mem_err = 0; if (enable) exception_handler(9, (unsigned long)fltr_set_mem_err); else exception_handler(9, (unsigned long)trap_low); DEBUG (1, "Leaving set_mem_fault_trap()"); } /* * This function does all command procesing for interfacing to gdb. It * returns 1 if you should skip the instruction at the trap address, 0 * otherwise. */ extern void breakinst(); void handle_exception (registers) unsigned long *registers; { int sigval; /* First, we must force all of the windows to be spilled out */ DEBUG (1, "Entering handle_exception()"); /* asm("mov %g0, %wim ; nop; nop; nop"); */ asm(" save %sp, -64, %sp \n\ save %sp, -64, %sp \n\ save %sp, -64, %sp \n\ save %sp, -64, %sp \n\ save %sp, -64, %sp \n\ save %sp, -64, %sp \n\ save %sp, -64, %sp \n\ save %sp, -64, %sp \n\ restore \n\ restore \n\ restore \n\ restore \n\ restore \n\ restore \n\ restore \n\ restore \n\ "); if (registers[PC] == (unsigned long)breakinst) { registers[PC] = registers[NPC]; registers[NPC] += 4; } /* get the last know signal number from the trap register */ sigval = computeSignal((registers[TBR] >> 4) & 0xff); /* call the main command processing loop for gdb */ gdb_event_loop (sigval, registers); } /* * This function will generate a breakpoint exception. It is used at the * beginning of a program to sync up with a debugger and can be used * otherwise as a quick means to stop program execution and "break" into * the debugger. */ void breakpoint() { DEBUG (1, "Entering breakpoint()"); if (!initialized) return; asm(" .globl " STRINGSYM(breakinst) " \n\ " STRINGSYM(breakinst) ": ta 128+1 \n\ nop \n\ nop \n\ "); } /* * This is just a test vector for debugging excpetions. */ void bad_trap(tt) int tt; { print ("Got a bad trap #"); outbyte (tt); outbyte ('\n'); asm("ta 0 \n\ nop \n\ nop \n\ "); } /* * This is just a test vector for debugging excpetions. */ void soft_trap(tt) int tt; { print ("Got a soft trap #"); outbyte (tt); outbyte ('\n'); asm("ta 0 \n\ nop \n\ nop \n\ "); } /* * Flush the instruction cache. We need to do this for the debugger stub so * that breakpoints, et. al. become visible to the instruction stream after * storing them in memory. * * For the sparclite, we need to do something here, but for a standard * sparc (which SIS simulates), we don't. */ void flush_i_cache () { } /* * This will reset the processor, so we never return from here. */ void target_reset() { asm ("call 0 \n\ nop "); } /* * g - read registers. * no params. * returns a vector of words, size is NUM_REGS. */ char * target_read_registers(unsigned long *registers) { char *ptr; unsigned long *sp; DEBUG (1, "In target_read_registers()"); ptr = packet_out_buf; ptr = mem2hex((char *)registers, ptr, 16 * 4, 0); /* G & O regs */ ptr = mem2hex((unsigned char *)(sp + 0), ptr, 16 * 4, 0); /* L & I regs */ memset(ptr, '0', 32 * 8); /* Floating point */ mem2hex((char *)®isters[Y], ptr + 32 * 4 * 2, 8 * 4, 0); /* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */ return (ptr); } /* * G - write registers. * param is a vector of words, size is NUM_REGS. * returns an OK or an error number. */ char * target_write_registers(unsigned long *registers) { unsigned char *ptr; unsigned long *sp; unsigned long *newsp, psr; DEBUG (1, "In target_write_registers()"); psr = registers[PSR]; ptr = &packet_in_buf[1]; hex2mem(ptr, (char *)registers, 16 * 4, 0); /* G & O regs */ hex2mem(ptr + 16 * 4 * 2, (unsigned char *)(sp + 0), 16 * 4, 0); /* L & I regs */ hex2mem(ptr + 64 * 4 * 2, (char *)®isters[Y], 8 * 4, 0); /* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */ /* * see if the stack pointer has moved. If so, then copy the saved * locals and ins to the new location. This keeps the window * overflow and underflow routines happy. */ newsp = (unsigned long *)registers[SP]; if (sp != newsp) sp = memcpy(newsp, sp, 16 * 4); /* Don't allow CWP to be modified. */ if (psr != registers[PSR]) registers[PSR] = (psr & 0x1f) | (registers[PSR] & ~0x1f); return (ptr); } char * target_dump_state(unsigned long *registers) { int tt; /* Trap type */ int sigval; char *ptr; unsigned long *sp; DEBUG (1, "In target_dump_state()"); sp = (unsigned long *)registers[SP]; tt = (registers[TBR] >> 4) & 0xff; /* reply to host that an exception has occurred */ sigval = computeSignal(tt); ptr = packet_out_buf; *ptr++ = 'T'; *ptr++ = hexchars[sigval >> 4]; *ptr++ = hexchars[sigval & 0xf]; *ptr++ = hexchars[PC >> 4]; *ptr++ = hexchars[PC & 0xf]; *ptr++ = ':'; ptr = mem2hex((unsigned char *)®isters[PC], ptr, 4, 0); *ptr++ = ';'; *ptr++ = hexchars[FP >> 4]; *ptr++ = hexchars[FP & 0xf]; *ptr++ = ':'; ptr = mem2hex((unsigned char *)(sp + 8 + 6), ptr, 4, 0); /* FP */ *ptr++ = ';'; *ptr++ = hexchars[SP >> 4]; *ptr++ = hexchars[SP & 0xf]; *ptr++ = ':'; ptr = mem2hex((unsigned char *)&sp, ptr, 4, 0); *ptr++ = ';'; *ptr++ = hexchars[NPC >> 4]; return (packet_out_buf); } void write_pc(unsigned long *registers, unsigned long addr) { DEBUG (1, "In write_pc"); registers[PC] = addr; registers[NPC] = addr + 4; }
Go to most recent revision | Compare with Previous | Blame | View Log