URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-old/] [newlib-1.17.0/] [newlib/] [libc/] [machine/] [cris/] [memset.c] - Rev 816
Compare with Previous | Blame | View Log
/* A memset for CRIS. Copyright (C) 1999-2005 Axis Communications. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Neither the name of Axis Communications nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* FIXME: This file should really only be used for reference, as the result is somewhat depending on gcc generating what we expect rather than what we describe. An assembly file should be used instead. */ /* Note the multiple occurrence of the expression "12*4", including the asm. It is hard to get it into the asm in a good way. Thus better to expose the problem everywhere: no macro. */ /* Assuming one cycle per dword written or read (ok, not really true; the world is not ideal), and one cycle per instruction, then 43+3*(n/48-1) <= 24+24*(n/48-1) so n >= 45.7; n >= 0.9; we win on the first full 48-byte block to set. */ #define MEMSET_BY_BLOCK_THRESHOLD (1 * 48) /* No name ambiguities in this file. */ __asm__ (".syntax no_register_prefix"); void *memset(void *pdst, int c, unsigned int plen) { /* Now we want the parameters in special registers. Make sure the compiler does something usable with this. */ register char *return_dst __asm__ ("r10") = pdst; register int n __asm__ ("r12") = plen; register int lc __asm__ ("r11") = c; /* Most apps use memset sanely. Memsetting about 3..4 bytes or less get penalized here compared to the generic implementation. */ /* This is fragile performancewise at best. Check with newer GCC releases, if they compile cascaded "x |= x << 8" to sane code. */ __asm__("movu.b %0,r13 \n\ lslq 8,r13 \n\ move.b %0,r13 \n\ move.d r13,%0 \n\ lslq 16,r13 \n\ or.d r13,%0" : "=r" (lc) /* Inputs. */ : "0" (lc) /* Outputs. */ : "r13"); /* Trash. */ { register char *dst __asm__ ("r13") = pdst; if (((unsigned long) pdst & 3) != 0 /* Oops! n = 0 must be a valid call, regardless of alignment. */ && n >= 3) { if ((unsigned long) dst & 1) { *dst = (char) lc; n--; dst++; } if ((unsigned long) dst & 2) { *(short *) dst = lc; n -= 2; dst += 2; } } /* Decide which setting method to use. */ if (n >= MEMSET_BY_BLOCK_THRESHOLD) { /* It is not optimal to tell the compiler about clobbering any registers; that will move the saving/restoring of those registers to the function prologue/epilogue, and make non-block sizes suboptimal. */ __asm__ volatile ("\ ;; GCC does promise correct register allocations, but let's \n\ ;; make sure it keeps its promises. \n\ .ifnc %0-%1-%4,$r13-$r12-$r11 \n\ .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\" \n\ .endif \n\ \n\ ;; Save the registers we'll clobber in the movem process \n\ ;; on the stack. Don't mention them to gcc, it will only be \n\ ;; upset. \n\ subq 11*4,sp \n\ movem r10,[sp] \n\ \n\ move.d r11,r0 \n\ move.d r11,r1 \n\ move.d r11,r2 \n\ move.d r11,r3 \n\ move.d r11,r4 \n\ move.d r11,r5 \n\ move.d r11,r6 \n\ move.d r11,r7 \n\ move.d r11,r8 \n\ move.d r11,r9 \n\ move.d r11,r10 \n\ \n\ ;; Now we've got this: \n\ ;; r13 - dst \n\ ;; r12 - n \n\ \n\ ;; Update n for the first loop \n\ subq 12*4,r12 \n\ 0: \n\ " #ifdef __arch_common_v10_v32 /* Cater to branch offset difference between v32 and v10. We assume the branch below has an 8-bit offset. */ " setf\n" #endif " subq 12*4,r12 \n\ bge 0b \n\ movem r11,[r13+] \n\ \n\ ;; Compensate for last loop underflowing n. \n\ addq 12*4,r12 \n\ \n\ ;; Restore registers from stack. \n\ movem [sp+],r10" /* Outputs. */ : "=r" (dst), "=r" (n) /* Inputs. */ : "0" (dst), "1" (n), "r" (lc)); } /* An ad-hoc unroll, used for 4*12-1..16 bytes. */ while (n >= 16) { *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; n -= 16; } switch (n) { case 0: break; case 1: *dst = (char) lc; break; case 2: *(short *) dst = (short) lc; break; case 3: *(short *) dst = (short) lc; dst += 2; *dst = (char) lc; break; case 4: *(long *) dst = lc; break; case 5: *(long *) dst = lc; dst += 4; *dst = (char) lc; break; case 6: *(long *) dst = lc; dst += 4; *(short *) dst = (short) lc; break; case 7: *(long *) dst = lc; dst += 4; *(short *) dst = (short) lc; dst += 2; *dst = (char) lc; break; case 8: *(long *) dst = lc; dst += 4; *(long *) dst = lc; break; case 9: *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *dst = (char) lc; break; case 10: *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(short *) dst = (short) lc; break; case 11: *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(short *) dst = (short) lc; dst += 2; *dst = (char) lc; break; case 12: *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(long *) dst = lc; break; case 13: *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *dst = (char) lc; break; case 14: *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(short *) dst = (short) lc; break; case 15: *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(long *) dst = lc; dst += 4; *(short *) dst = (short) lc; dst += 2; *dst = (char) lc; break; } } return return_dst; }