URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.18.50/] [bfd/] [coff-sh.c] - Rev 271
Go to most recent revision | Compare with Previous | Blame | View Log
/* BFD back-end for Renesas Super-H COFF binaries. Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007 Free Software Foundation, Inc. Contributed by Cygnus Support. Written by Steve Chamberlain, <sac@cygnus.com>. Relaxing code written by Ian Lance Taylor, <ian@cygnus.com>. This file is part of BFD, the Binary File Descriptor library. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #include "sysdep.h" #include "bfd.h" #include "libiberty.h" #include "libbfd.h" #include "bfdlink.h" #include "coff/sh.h" #include "coff/internal.h" #ifdef COFF_WITH_PE #include "coff/pe.h" #ifndef COFF_IMAGE_WITH_PE static bfd_boolean sh_align_load_span PARAMS ((bfd *, asection *, bfd_byte *, bfd_boolean (*) (bfd *, asection *, PTR, bfd_byte *, bfd_vma), PTR, bfd_vma **, bfd_vma *, bfd_vma, bfd_vma, bfd_boolean *)); #define _bfd_sh_align_load_span sh_align_load_span #endif #endif #include "libcoff.h" /* Internal functions. */ static bfd_reloc_status_type sh_reloc PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); static long get_symbol_value PARAMS ((asymbol *)); static bfd_boolean sh_relax_section PARAMS ((bfd *, asection *, struct bfd_link_info *, bfd_boolean *)); static bfd_boolean sh_relax_delete_bytes PARAMS ((bfd *, asection *, bfd_vma, int)); #ifndef COFF_IMAGE_WITH_PE static const struct sh_opcode *sh_insn_info PARAMS ((unsigned int)); #endif static bfd_boolean sh_align_loads PARAMS ((bfd *, asection *, struct internal_reloc *, bfd_byte *, bfd_boolean *)); static bfd_boolean sh_swap_insns PARAMS ((bfd *, asection *, PTR, bfd_byte *, bfd_vma)); static bfd_boolean sh_relocate_section PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *, struct internal_reloc *, struct internal_syment *, asection **)); static bfd_byte *sh_coff_get_relocated_section_contents PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_order *, bfd_byte *, bfd_boolean, asymbol **)); static reloc_howto_type * sh_coff_reloc_type_lookup PARAMS ((bfd *, bfd_reloc_code_real_type)); #ifdef COFF_WITH_PE /* Can't build import tables with 2**4 alignment. */ #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER 2 #else /* Default section alignment to 2**4. */ #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER 4 #endif #ifdef COFF_IMAGE_WITH_PE /* Align PE executables. */ #define COFF_PAGE_SIZE 0x1000 #endif /* Generate long file names. */ #define COFF_LONG_FILENAMES #ifdef COFF_WITH_PE static bfd_boolean in_reloc_p PARAMS ((bfd *, reloc_howto_type *)); /* Return TRUE if this relocation should appear in the output .reloc section. */ static bfd_boolean in_reloc_p (abfd, howto) bfd * abfd ATTRIBUTE_UNUSED; reloc_howto_type * howto; { return ! howto->pc_relative && howto->type != R_SH_IMAGEBASE; } #endif /* The supported relocations. There are a lot of relocations defined in coff/internal.h which we do not expect to ever see. */ static reloc_howto_type sh_coff_howtos[] = { EMPTY_HOWTO (0), EMPTY_HOWTO (1), #ifdef COFF_WITH_PE /* Windows CE */ HOWTO (R_SH_IMM32CE, /* type */ 0, /* rightshift */ 2, /* size (0 = byte, 1 = short, 2 = long) */ 32, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_imm32ce", /* name */ TRUE, /* partial_inplace */ 0xffffffff, /* src_mask */ 0xffffffff, /* dst_mask */ FALSE), /* pcrel_offset */ #else EMPTY_HOWTO (2), #endif EMPTY_HOWTO (3), /* R_SH_PCREL8 */ EMPTY_HOWTO (4), /* R_SH_PCREL16 */ EMPTY_HOWTO (5), /* R_SH_HIGH8 */ EMPTY_HOWTO (6), /* R_SH_IMM24 */ EMPTY_HOWTO (7), /* R_SH_LOW16 */ EMPTY_HOWTO (8), EMPTY_HOWTO (9), /* R_SH_PCDISP8BY4 */ HOWTO (R_SH_PCDISP8BY2, /* type */ 1, /* rightshift */ 1, /* size (0 = byte, 1 = short, 2 = long) */ 8, /* bitsize */ TRUE, /* pc_relative */ 0, /* bitpos */ complain_overflow_signed, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_pcdisp8by2", /* name */ TRUE, /* partial_inplace */ 0xff, /* src_mask */ 0xff, /* dst_mask */ TRUE), /* pcrel_offset */ EMPTY_HOWTO (11), /* R_SH_PCDISP8 */ HOWTO (R_SH_PCDISP, /* type */ 1, /* rightshift */ 1, /* size (0 = byte, 1 = short, 2 = long) */ 12, /* bitsize */ TRUE, /* pc_relative */ 0, /* bitpos */ complain_overflow_signed, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_pcdisp12by2", /* name */ TRUE, /* partial_inplace */ 0xfff, /* src_mask */ 0xfff, /* dst_mask */ TRUE), /* pcrel_offset */ EMPTY_HOWTO (13), HOWTO (R_SH_IMM32, /* type */ 0, /* rightshift */ 2, /* size (0 = byte, 1 = short, 2 = long) */ 32, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_imm32", /* name */ TRUE, /* partial_inplace */ 0xffffffff, /* src_mask */ 0xffffffff, /* dst_mask */ FALSE), /* pcrel_offset */ EMPTY_HOWTO (15), #ifdef COFF_WITH_PE HOWTO (R_SH_IMAGEBASE, /* type */ 0, /* rightshift */ 2, /* size (0 = byte, 1 = short, 2 = long) */ 32, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "rva32", /* name */ TRUE, /* partial_inplace */ 0xffffffff, /* src_mask */ 0xffffffff, /* dst_mask */ FALSE), /* pcrel_offset */ #else EMPTY_HOWTO (16), /* R_SH_IMM8 */ #endif EMPTY_HOWTO (17), /* R_SH_IMM8BY2 */ EMPTY_HOWTO (18), /* R_SH_IMM8BY4 */ EMPTY_HOWTO (19), /* R_SH_IMM4 */ EMPTY_HOWTO (20), /* R_SH_IMM4BY2 */ EMPTY_HOWTO (21), /* R_SH_IMM4BY4 */ HOWTO (R_SH_PCRELIMM8BY2, /* type */ 1, /* rightshift */ 1, /* size (0 = byte, 1 = short, 2 = long) */ 8, /* bitsize */ TRUE, /* pc_relative */ 0, /* bitpos */ complain_overflow_unsigned, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_pcrelimm8by2", /* name */ TRUE, /* partial_inplace */ 0xff, /* src_mask */ 0xff, /* dst_mask */ TRUE), /* pcrel_offset */ HOWTO (R_SH_PCRELIMM8BY4, /* type */ 2, /* rightshift */ 1, /* size (0 = byte, 1 = short, 2 = long) */ 8, /* bitsize */ TRUE, /* pc_relative */ 0, /* bitpos */ complain_overflow_unsigned, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_pcrelimm8by4", /* name */ TRUE, /* partial_inplace */ 0xff, /* src_mask */ 0xff, /* dst_mask */ TRUE), /* pcrel_offset */ HOWTO (R_SH_IMM16, /* type */ 0, /* rightshift */ 1, /* size (0 = byte, 1 = short, 2 = long) */ 16, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_imm16", /* name */ TRUE, /* partial_inplace */ 0xffff, /* src_mask */ 0xffff, /* dst_mask */ FALSE), /* pcrel_offset */ HOWTO (R_SH_SWITCH16, /* type */ 0, /* rightshift */ 1, /* size (0 = byte, 1 = short, 2 = long) */ 16, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_switch16", /* name */ TRUE, /* partial_inplace */ 0xffff, /* src_mask */ 0xffff, /* dst_mask */ FALSE), /* pcrel_offset */ HOWTO (R_SH_SWITCH32, /* type */ 0, /* rightshift */ 2, /* size (0 = byte, 1 = short, 2 = long) */ 32, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_switch32", /* name */ TRUE, /* partial_inplace */ 0xffffffff, /* src_mask */ 0xffffffff, /* dst_mask */ FALSE), /* pcrel_offset */ HOWTO (R_SH_USES, /* type */ 0, /* rightshift */ 1, /* size (0 = byte, 1 = short, 2 = long) */ 16, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_uses", /* name */ TRUE, /* partial_inplace */ 0xffff, /* src_mask */ 0xffff, /* dst_mask */ FALSE), /* pcrel_offset */ HOWTO (R_SH_COUNT, /* type */ 0, /* rightshift */ 2, /* size (0 = byte, 1 = short, 2 = long) */ 32, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_count", /* name */ TRUE, /* partial_inplace */ 0xffffffff, /* src_mask */ 0xffffffff, /* dst_mask */ FALSE), /* pcrel_offset */ HOWTO (R_SH_ALIGN, /* type */ 0, /* rightshift */ 2, /* size (0 = byte, 1 = short, 2 = long) */ 32, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_align", /* name */ TRUE, /* partial_inplace */ 0xffffffff, /* src_mask */ 0xffffffff, /* dst_mask */ FALSE), /* pcrel_offset */ HOWTO (R_SH_CODE, /* type */ 0, /* rightshift */ 2, /* size (0 = byte, 1 = short, 2 = long) */ 32, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_code", /* name */ TRUE, /* partial_inplace */ 0xffffffff, /* src_mask */ 0xffffffff, /* dst_mask */ FALSE), /* pcrel_offset */ HOWTO (R_SH_DATA, /* type */ 0, /* rightshift */ 2, /* size (0 = byte, 1 = short, 2 = long) */ 32, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_data", /* name */ TRUE, /* partial_inplace */ 0xffffffff, /* src_mask */ 0xffffffff, /* dst_mask */ FALSE), /* pcrel_offset */ HOWTO (R_SH_LABEL, /* type */ 0, /* rightshift */ 2, /* size (0 = byte, 1 = short, 2 = long) */ 32, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_label", /* name */ TRUE, /* partial_inplace */ 0xffffffff, /* src_mask */ 0xffffffff, /* dst_mask */ FALSE), /* pcrel_offset */ HOWTO (R_SH_SWITCH8, /* type */ 0, /* rightshift */ 0, /* size (0 = byte, 1 = short, 2 = long) */ 8, /* bitsize */ FALSE, /* pc_relative */ 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ sh_reloc, /* special_function */ "r_switch8", /* name */ TRUE, /* partial_inplace */ 0xff, /* src_mask */ 0xff, /* dst_mask */ FALSE) /* pcrel_offset */ }; #define SH_COFF_HOWTO_COUNT (sizeof sh_coff_howtos / sizeof sh_coff_howtos[0]) /* Check for a bad magic number. */ #define BADMAG(x) SHBADMAG(x) /* Customize coffcode.h (this is not currently used). */ #define SH 1 /* FIXME: This should not be set here. */ #define __A_MAGIC_SET__ #ifndef COFF_WITH_PE /* Swap the r_offset field in and out. */ #define SWAP_IN_RELOC_OFFSET H_GET_32 #define SWAP_OUT_RELOC_OFFSET H_PUT_32 /* Swap out extra information in the reloc structure. */ #define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \ do \ { \ dst->r_stuff[0] = 'S'; \ dst->r_stuff[1] = 'C'; \ } \ while (0) #endif /* Get the value of a symbol, when performing a relocation. */ static long get_symbol_value (symbol) asymbol *symbol; { bfd_vma relocation; if (bfd_is_com_section (symbol->section)) relocation = 0; else relocation = (symbol->value + symbol->section->output_section->vma + symbol->section->output_offset); return relocation; } #ifdef COFF_WITH_PE /* Convert an rtype to howto for the COFF backend linker. Copied from coff-i386. */ #define coff_rtype_to_howto coff_sh_rtype_to_howto static reloc_howto_type * coff_sh_rtype_to_howto PARAMS ((bfd *, asection *, struct internal_reloc *, struct coff_link_hash_entry *, struct internal_syment *, bfd_vma *)); static reloc_howto_type * coff_sh_rtype_to_howto (abfd, sec, rel, h, sym, addendp) bfd * abfd ATTRIBUTE_UNUSED; asection * sec; struct internal_reloc * rel; struct coff_link_hash_entry * h; struct internal_syment * sym; bfd_vma * addendp; { reloc_howto_type * howto; howto = sh_coff_howtos + rel->r_type; *addendp = 0; if (howto->pc_relative) *addendp += sec->vma; if (sym != NULL && sym->n_scnum == 0 && sym->n_value != 0) { /* This is a common symbol. The section contents include the size (sym->n_value) as an addend. The relocate_section function will be adding in the final value of the symbol. We need to subtract out the current size in order to get the correct result. */ BFD_ASSERT (h != NULL); } if (howto->pc_relative) { *addendp -= 4; /* If the symbol is defined, then the generic code is going to add back the symbol value in order to cancel out an adjustment it made to the addend. However, we set the addend to 0 at the start of this function. We need to adjust here, to avoid the adjustment the generic code will make. FIXME: This is getting a bit hackish. */ if (sym != NULL && sym->n_scnum != 0) *addendp -= sym->n_value; } if (rel->r_type == R_SH_IMAGEBASE) *addendp -= pe_data (sec->output_section->owner)->pe_opthdr.ImageBase; return howto; } #endif /* COFF_WITH_PE */ /* This structure is used to map BFD reloc codes to SH PE relocs. */ struct shcoff_reloc_map { bfd_reloc_code_real_type bfd_reloc_val; unsigned char shcoff_reloc_val; }; #ifdef COFF_WITH_PE /* An array mapping BFD reloc codes to SH PE relocs. */ static const struct shcoff_reloc_map sh_reloc_map[] = { { BFD_RELOC_32, R_SH_IMM32CE }, { BFD_RELOC_RVA, R_SH_IMAGEBASE }, { BFD_RELOC_CTOR, R_SH_IMM32CE }, }; #else /* An array mapping BFD reloc codes to SH PE relocs. */ static const struct shcoff_reloc_map sh_reloc_map[] = { { BFD_RELOC_32, R_SH_IMM32 }, { BFD_RELOC_CTOR, R_SH_IMM32 }, }; #endif /* Given a BFD reloc code, return the howto structure for the corresponding SH PE reloc. */ #define coff_bfd_reloc_type_lookup sh_coff_reloc_type_lookup #define coff_bfd_reloc_name_lookup sh_coff_reloc_name_lookup static reloc_howto_type * sh_coff_reloc_type_lookup (abfd, code) bfd * abfd ATTRIBUTE_UNUSED; bfd_reloc_code_real_type code; { unsigned int i; for (i = ARRAY_SIZE (sh_reloc_map); i--;) if (sh_reloc_map[i].bfd_reloc_val == code) return &sh_coff_howtos[(int) sh_reloc_map[i].shcoff_reloc_val]; fprintf (stderr, "SH Error: unknown reloc type %d\n", code); return NULL; } static reloc_howto_type * sh_coff_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED, const char *r_name) { unsigned int i; for (i = 0; i < sizeof (sh_coff_howtos) / sizeof (sh_coff_howtos[0]); i++) if (sh_coff_howtos[i].name != NULL && strcasecmp (sh_coff_howtos[i].name, r_name) == 0) return &sh_coff_howtos[i]; return NULL; } /* This macro is used in coffcode.h to get the howto corresponding to an internal reloc. */ #define RTYPE2HOWTO(relent, internal) \ ((relent)->howto = \ ((internal)->r_type < SH_COFF_HOWTO_COUNT \ ? &sh_coff_howtos[(internal)->r_type] \ : (reloc_howto_type *) NULL)) /* This is the same as the macro in coffcode.h, except that it copies r_offset into reloc_entry->addend for some relocs. */ #define CALC_ADDEND(abfd, ptr, reloc, cache_ptr) \ { \ coff_symbol_type *coffsym = (coff_symbol_type *) NULL; \ if (ptr && bfd_asymbol_bfd (ptr) != abfd) \ coffsym = (obj_symbols (abfd) \ + (cache_ptr->sym_ptr_ptr - symbols)); \ else if (ptr) \ coffsym = coff_symbol_from (abfd, ptr); \ if (coffsym != (coff_symbol_type *) NULL \ && coffsym->native->u.syment.n_scnum == 0) \ cache_ptr->addend = 0; \ else if (ptr && bfd_asymbol_bfd (ptr) == abfd \ && ptr->section != (asection *) NULL) \ cache_ptr->addend = - (ptr->section->vma + ptr->value); \ else \ cache_ptr->addend = 0; \ if ((reloc).r_type == R_SH_SWITCH8 \ || (reloc).r_type == R_SH_SWITCH16 \ || (reloc).r_type == R_SH_SWITCH32 \ || (reloc).r_type == R_SH_USES \ || (reloc).r_type == R_SH_COUNT \ || (reloc).r_type == R_SH_ALIGN) \ cache_ptr->addend = (reloc).r_offset; \ } /* This is the howto function for the SH relocations. */ static bfd_reloc_status_type sh_reloc (abfd, reloc_entry, symbol_in, data, input_section, output_bfd, error_message) bfd *abfd; arelent *reloc_entry; asymbol *symbol_in; PTR data; asection *input_section; bfd *output_bfd; char **error_message ATTRIBUTE_UNUSED; { unsigned long insn; bfd_vma sym_value; unsigned short r_type; bfd_vma addr = reloc_entry->address; bfd_byte *hit_data = addr + (bfd_byte *) data; r_type = reloc_entry->howto->type; if (output_bfd != NULL) { /* Partial linking--do nothing. */ reloc_entry->address += input_section->output_offset; return bfd_reloc_ok; } /* Almost all relocs have to do with relaxing. If any work must be done for them, it has been done in sh_relax_section. */ if (r_type != R_SH_IMM32 #ifdef COFF_WITH_PE && r_type != R_SH_IMM32CE && r_type != R_SH_IMAGEBASE #endif && (r_type != R_SH_PCDISP || (symbol_in->flags & BSF_LOCAL) != 0)) return bfd_reloc_ok; if (symbol_in != NULL && bfd_is_und_section (symbol_in->section)) return bfd_reloc_undefined; sym_value = get_symbol_value (symbol_in); switch (r_type) { case R_SH_IMM32: #ifdef COFF_WITH_PE case R_SH_IMM32CE: #endif insn = bfd_get_32 (abfd, hit_data); insn += sym_value + reloc_entry->addend; bfd_put_32 (abfd, (bfd_vma) insn, hit_data); break; #ifdef COFF_WITH_PE case R_SH_IMAGEBASE: insn = bfd_get_32 (abfd, hit_data); insn += sym_value + reloc_entry->addend; insn -= pe_data (input_section->output_section->owner)->pe_opthdr.ImageBase; bfd_put_32 (abfd, (bfd_vma) insn, hit_data); break; #endif case R_SH_PCDISP: insn = bfd_get_16 (abfd, hit_data); sym_value += reloc_entry->addend; sym_value -= (input_section->output_section->vma + input_section->output_offset + addr + 4); sym_value += (insn & 0xfff) << 1; if (insn & 0x800) sym_value -= 0x1000; insn = (insn & 0xf000) | (sym_value & 0xfff); bfd_put_16 (abfd, (bfd_vma) insn, hit_data); if (sym_value < (bfd_vma) -0x1000 || sym_value >= 0x1000) return bfd_reloc_overflow; break; default: abort (); break; } return bfd_reloc_ok; } #define coff_bfd_merge_private_bfd_data _bfd_generic_verify_endian_match /* We can do relaxing. */ #define coff_bfd_relax_section sh_relax_section /* We use the special COFF backend linker. */ #define coff_relocate_section sh_relocate_section /* When relaxing, we need to use special code to get the relocated section contents. */ #define coff_bfd_get_relocated_section_contents \ sh_coff_get_relocated_section_contents #include "coffcode.h" /* This function handles relaxing on the SH. Function calls on the SH look like this: movl L1,r0 ... jsr @r0 ... L1: .long function The compiler and assembler will cooperate to create R_SH_USES relocs on the jsr instructions. The r_offset field of the R_SH_USES reloc is the PC relative offset to the instruction which loads the register (the r_offset field is computed as though it were a jump instruction, so the offset value is actually from four bytes past the instruction). The linker can use this reloc to determine just which function is being called, and thus decide whether it is possible to replace the jsr with a bsr. If multiple function calls are all based on a single register load (i.e., the same function is called multiple times), the compiler guarantees that each function call will have an R_SH_USES reloc. Therefore, if the linker is able to convert each R_SH_USES reloc which refers to that address, it can safely eliminate the register load. When the assembler creates an R_SH_USES reloc, it examines it to determine which address is being loaded (L1 in the above example). It then counts the number of references to that address, and creates an R_SH_COUNT reloc at that address. The r_offset field of the R_SH_COUNT reloc will be the number of references. If the linker is able to eliminate a register load, it can use the R_SH_COUNT reloc to see whether it can also eliminate the function address. SH relaxing also handles another, unrelated, matter. On the SH, if a load or store instruction is not aligned on a four byte boundary, the memory cycle interferes with the 32 bit instruction fetch, causing a one cycle bubble in the pipeline. Therefore, we try to align load and store instructions on four byte boundaries if we can, by swapping them with one of the adjacent instructions. */ static bfd_boolean sh_relax_section (abfd, sec, link_info, again) bfd *abfd; asection *sec; struct bfd_link_info *link_info; bfd_boolean *again; { struct internal_reloc *internal_relocs; bfd_boolean have_code; struct internal_reloc *irel, *irelend; bfd_byte *contents = NULL; *again = FALSE; if (link_info->relocatable || (sec->flags & SEC_RELOC) == 0 || sec->reloc_count == 0) return TRUE; if (coff_section_data (abfd, sec) == NULL) { bfd_size_type amt = sizeof (struct coff_section_tdata); sec->used_by_bfd = (PTR) bfd_zalloc (abfd, amt); if (sec->used_by_bfd == NULL) return FALSE; } internal_relocs = (_bfd_coff_read_internal_relocs (abfd, sec, link_info->keep_memory, (bfd_byte *) NULL, FALSE, (struct internal_reloc *) NULL)); if (internal_relocs == NULL) goto error_return; have_code = FALSE; irelend = internal_relocs + sec->reloc_count; for (irel = internal_relocs; irel < irelend; irel++) { bfd_vma laddr, paddr, symval; unsigned short insn; struct internal_reloc *irelfn, *irelscan, *irelcount; struct internal_syment sym; bfd_signed_vma foff; if (irel->r_type == R_SH_CODE) have_code = TRUE; if (irel->r_type != R_SH_USES) continue; /* Get the section contents. */ if (contents == NULL) { if (coff_section_data (abfd, sec)->contents != NULL) contents = coff_section_data (abfd, sec)->contents; else { if (!bfd_malloc_and_get_section (abfd, sec, &contents)) goto error_return; } } /* The r_offset field of the R_SH_USES reloc will point us to the register load. The 4 is because the r_offset field is computed as though it were a jump offset, which are based from 4 bytes after the jump instruction. */ laddr = irel->r_vaddr - sec->vma + 4; /* Careful to sign extend the 32-bit offset. */ laddr += ((irel->r_offset & 0xffffffff) ^ 0x80000000) - 0x80000000; if (laddr >= sec->size) { (*_bfd_error_handler) ("%B: 0x%lx: warning: bad R_SH_USES offset", abfd, (unsigned long) irel->r_vaddr); continue; } insn = bfd_get_16 (abfd, contents + laddr); /* If the instruction is not mov.l NN,rN, we don't know what to do. */ if ((insn & 0xf000) != 0xd000) { ((*_bfd_error_handler) ("%B: 0x%lx: warning: R_SH_USES points to unrecognized insn 0x%x", abfd, (unsigned long) irel->r_vaddr, insn)); continue; } /* Get the address from which the register is being loaded. The displacement in the mov.l instruction is quadrupled. It is a displacement from four bytes after the movl instruction, but, before adding in the PC address, two least significant bits of the PC are cleared. We assume that the section is aligned on a four byte boundary. */ paddr = insn & 0xff; paddr *= 4; paddr += (laddr + 4) &~ (bfd_vma) 3; if (paddr >= sec->size) { ((*_bfd_error_handler) ("%B: 0x%lx: warning: bad R_SH_USES load offset", abfd, (unsigned long) irel->r_vaddr)); continue; } /* Get the reloc for the address from which the register is being loaded. This reloc will tell us which function is actually being called. */ paddr += sec->vma; for (irelfn = internal_relocs; irelfn < irelend; irelfn++) if (irelfn->r_vaddr == paddr #ifdef COFF_WITH_PE && (irelfn->r_type == R_SH_IMM32 || irelfn->r_type == R_SH_IMM32CE || irelfn->r_type == R_SH_IMAGEBASE) #else && irelfn->r_type == R_SH_IMM32 #endif ) break; if (irelfn >= irelend) { ((*_bfd_error_handler) ("%B: 0x%lx: warning: could not find expected reloc", abfd, (unsigned long) paddr)); continue; } /* Get the value of the symbol referred to by the reloc. */ if (! _bfd_coff_get_external_symbols (abfd)) goto error_return; bfd_coff_swap_sym_in (abfd, ((bfd_byte *) obj_coff_external_syms (abfd) + (irelfn->r_symndx * bfd_coff_symesz (abfd))), &sym); if (sym.n_scnum != 0 && sym.n_scnum != sec->target_index) { ((*_bfd_error_handler) ("%B: 0x%lx: warning: symbol in unexpected section", abfd, (unsigned long) paddr)); continue; } if (sym.n_sclass != C_EXT) { symval = (sym.n_value - sec->vma + sec->output_section->vma + sec->output_offset); } else { struct coff_link_hash_entry *h; h = obj_coff_sym_hashes (abfd)[irelfn->r_symndx]; BFD_ASSERT (h != NULL); if (h->root.type != bfd_link_hash_defined && h->root.type != bfd_link_hash_defweak) { /* This appears to be a reference to an undefined symbol. Just ignore it--it will be caught by the regular reloc processing. */ continue; } symval = (h->root.u.def.value + h->root.u.def.section->output_section->vma + h->root.u.def.section->output_offset); } symval += bfd_get_32 (abfd, contents + paddr - sec->vma); /* See if this function call can be shortened. */ foff = (symval - (irel->r_vaddr - sec->vma + sec->output_section->vma + sec->output_offset + 4)); if (foff < -0x1000 || foff >= 0x1000) { /* After all that work, we can't shorten this function call. */ continue; } /* Shorten the function call. */ /* For simplicity of coding, we are going to modify the section contents, the section relocs, and the BFD symbol table. We must tell the rest of the code not to free up this information. It would be possible to instead create a table of changes which have to be made, as is done in coff-mips.c; that would be more work, but would require less memory when the linker is run. */ coff_section_data (abfd, sec)->relocs = internal_relocs; coff_section_data (abfd, sec)->keep_relocs = TRUE; coff_section_data (abfd, sec)->contents = contents; coff_section_data (abfd, sec)->keep_contents = TRUE; obj_coff_keep_syms (abfd) = TRUE; /* Replace the jsr with a bsr. */ /* Change the R_SH_USES reloc into an R_SH_PCDISP reloc, and replace the jsr with a bsr. */ irel->r_type = R_SH_PCDISP; irel->r_symndx = irelfn->r_symndx; if (sym.n_sclass != C_EXT) { /* If this needs to be changed because of future relaxing, it will be handled here like other internal PCDISP relocs. */ bfd_put_16 (abfd, (bfd_vma) 0xb000 | ((foff >> 1) & 0xfff), contents + irel->r_vaddr - sec->vma); } else { /* We can't fully resolve this yet, because the external symbol value may be changed by future relaxing. We let the final link phase handle it. */ bfd_put_16 (abfd, (bfd_vma) 0xb000, contents + irel->r_vaddr - sec->vma); } /* See if there is another R_SH_USES reloc referring to the same register load. */ for (irelscan = internal_relocs; irelscan < irelend; irelscan++) if (irelscan->r_type == R_SH_USES && laddr == irelscan->r_vaddr - sec->vma + 4 + irelscan->r_offset) break; if (irelscan < irelend) { /* Some other function call depends upon this register load, and we have not yet converted that function call. Indeed, we may never be able to convert it. There is nothing else we can do at this point. */ continue; } /* Look for a R_SH_COUNT reloc on the location where the function address is stored. Do this before deleting any bytes, to avoid confusion about the address. */ for (irelcount = internal_relocs; irelcount < irelend; irelcount++) if (irelcount->r_vaddr == paddr && irelcount->r_type == R_SH_COUNT) break; /* Delete the register load. */ if (! sh_relax_delete_bytes (abfd, sec, laddr, 2)) goto error_return; /* That will change things, so, just in case it permits some other function call to come within range, we should relax again. Note that this is not required, and it may be slow. */ *again = TRUE; /* Now check whether we got a COUNT reloc. */ if (irelcount >= irelend) { ((*_bfd_error_handler) ("%B: 0x%lx: warning: could not find expected COUNT reloc", abfd, (unsigned long) paddr)); continue; } /* The number of uses is stored in the r_offset field. We've just deleted one. */ if (irelcount->r_offset == 0) { ((*_bfd_error_handler) ("%B: 0x%lx: warning: bad count", abfd, (unsigned long) paddr)); continue; } --irelcount->r_offset; /* If there are no more uses, we can delete the address. Reload the address from irelfn, in case it was changed by the previous call to sh_relax_delete_bytes. */ if (irelcount->r_offset == 0) { if (! sh_relax_delete_bytes (abfd, sec, irelfn->r_vaddr - sec->vma, 4)) goto error_return; } /* We've done all we can with that function call. */ } /* Look for load and store instructions that we can align on four byte boundaries. */ if (have_code) { bfd_boolean swapped; /* Get the section contents. */ if (contents == NULL) { if (coff_section_data (abfd, sec)->contents != NULL) contents = coff_section_data (abfd, sec)->contents; else { if (!bfd_malloc_and_get_section (abfd, sec, &contents)) goto error_return; } } if (! sh_align_loads (abfd, sec, internal_relocs, contents, &swapped)) goto error_return; if (swapped) { coff_section_data (abfd, sec)->relocs = internal_relocs; coff_section_data (abfd, sec)->keep_relocs = TRUE; coff_section_data (abfd, sec)->contents = contents; coff_section_data (abfd, sec)->keep_contents = TRUE; obj_coff_keep_syms (abfd) = TRUE; } } if (internal_relocs != NULL && internal_relocs != coff_section_data (abfd, sec)->relocs) { if (! link_info->keep_memory) free (internal_relocs); else coff_section_data (abfd, sec)->relocs = internal_relocs; } if (contents != NULL && contents != coff_section_data (abfd, sec)->contents) { if (! link_info->keep_memory) free (contents); else /* Cache the section contents for coff_link_input_bfd. */ coff_section_data (abfd, sec)->contents = contents; } return TRUE; error_return: if (internal_relocs != NULL && internal_relocs != coff_section_data (abfd, sec)->relocs) free (internal_relocs); if (contents != NULL && contents != coff_section_data (abfd, sec)->contents) free (contents); return FALSE; } /* Delete some bytes from a section while relaxing. */ static bfd_boolean sh_relax_delete_bytes (abfd, sec, addr, count) bfd *abfd; asection *sec; bfd_vma addr; int count; { bfd_byte *contents; struct internal_reloc *irel, *irelend; struct internal_reloc *irelalign; bfd_vma toaddr; bfd_byte *esym, *esymend; bfd_size_type symesz; struct coff_link_hash_entry **sym_hash; asection *o; contents = coff_section_data (abfd, sec)->contents; /* The deletion must stop at the next ALIGN reloc for an aligment power larger than the number of bytes we are deleting. */ irelalign = NULL; toaddr = sec->size; irel = coff_section_data (abfd, sec)->relocs; irelend = irel + sec->reloc_count; for (; irel < irelend; irel++) { if (irel->r_type == R_SH_ALIGN && irel->r_vaddr - sec->vma > addr && count < (1 << irel->r_offset)) { irelalign = irel; toaddr = irel->r_vaddr - sec->vma; break; } } /* Actually delete the bytes. */ memmove (contents + addr, contents + addr + count, (size_t) (toaddr - addr - count)); if (irelalign == NULL) sec->size -= count; else { int i; #define NOP_OPCODE (0x0009) BFD_ASSERT ((count & 1) == 0); for (i = 0; i < count; i += 2) bfd_put_16 (abfd, (bfd_vma) NOP_OPCODE, contents + toaddr - count + i); } /* Adjust all the relocs. */ for (irel = coff_section_data (abfd, sec)->relocs; irel < irelend; irel++) { bfd_vma nraddr, stop; bfd_vma start = 0; int insn = 0; struct internal_syment sym; int off, adjust, oinsn; bfd_signed_vma voff = 0; bfd_boolean overflow; /* Get the new reloc address. */ nraddr = irel->r_vaddr - sec->vma; if ((irel->r_vaddr - sec->vma > addr && irel->r_vaddr - sec->vma < toaddr) || (irel->r_type == R_SH_ALIGN && irel->r_vaddr - sec->vma == toaddr)) nraddr -= count; /* See if this reloc was for the bytes we have deleted, in which case we no longer care about it. Don't delete relocs which represent addresses, though. */ if (irel->r_vaddr - sec->vma >= addr && irel->r_vaddr - sec->vma < addr + count && irel->r_type != R_SH_ALIGN && irel->r_type != R_SH_CODE && irel->r_type != R_SH_DATA && irel->r_type != R_SH_LABEL) irel->r_type = R_SH_UNUSED; /* If this is a PC relative reloc, see if the range it covers includes the bytes we have deleted. */ switch (irel->r_type) { default: break; case R_SH_PCDISP8BY2: case R_SH_PCDISP: case R_SH_PCRELIMM8BY2: case R_SH_PCRELIMM8BY4: start = irel->r_vaddr - sec->vma; insn = bfd_get_16 (abfd, contents + nraddr); break; } switch (irel->r_type) { default: start = stop = addr; break; case R_SH_IMM32: #ifdef COFF_WITH_PE case R_SH_IMM32CE: case R_SH_IMAGEBASE: #endif /* If this reloc is against a symbol defined in this section, and the symbol will not be adjusted below, we must check the addend to see it will put the value in range to be adjusted, and hence must be changed. */ bfd_coff_swap_sym_in (abfd, ((bfd_byte *) obj_coff_external_syms (abfd) + (irel->r_symndx * bfd_coff_symesz (abfd))), &sym); if (sym.n_sclass != C_EXT && sym.n_scnum == sec->target_index && ((bfd_vma) sym.n_value <= addr || (bfd_vma) sym.n_value >= toaddr)) { bfd_vma val; val = bfd_get_32 (abfd, contents + nraddr); val += sym.n_value; if (val > addr && val < toaddr) bfd_put_32 (abfd, val - count, contents + nraddr); } start = stop = addr; break; case R_SH_PCDISP8BY2: off = insn & 0xff; if (off & 0x80) off -= 0x100; stop = (bfd_vma) ((bfd_signed_vma) start + 4 + off * 2); break; case R_SH_PCDISP: bfd_coff_swap_sym_in (abfd, ((bfd_byte *) obj_coff_external_syms (abfd) + (irel->r_symndx * bfd_coff_symesz (abfd))), &sym); if (sym.n_sclass == C_EXT) start = stop = addr; else { off = insn & 0xfff; if (off & 0x800) off -= 0x1000; stop = (bfd_vma) ((bfd_signed_vma) start + 4 + off * 2); } break; case R_SH_PCRELIMM8BY2: off = insn & 0xff; stop = start + 4 + off * 2; break; case R_SH_PCRELIMM8BY4: off = insn & 0xff; stop = (start &~ (bfd_vma) 3) + 4 + off * 4; break; case R_SH_SWITCH8: case R_SH_SWITCH16: case R_SH_SWITCH32: /* These relocs types represent .word L2-L1 The r_offset field holds the difference between the reloc address and L1. That is the start of the reloc, and adding in the contents gives us the top. We must adjust both the r_offset field and the section contents. */ start = irel->r_vaddr - sec->vma; stop = (bfd_vma) ((bfd_signed_vma) start - (long) irel->r_offset); if (start > addr && start < toaddr && (stop <= addr || stop >= toaddr)) irel->r_offset += count; else if (stop > addr && stop < toaddr && (start <= addr || start >= toaddr)) irel->r_offset -= count; start = stop; if (irel->r_type == R_SH_SWITCH16) voff = bfd_get_signed_16 (abfd, contents + nraddr); else if (irel->r_type == R_SH_SWITCH8) voff = bfd_get_8 (abfd, contents + nraddr); else voff = bfd_get_signed_32 (abfd, contents + nraddr); stop = (bfd_vma) ((bfd_signed_vma) start + voff); break; case R_SH_USES: start = irel->r_vaddr - sec->vma; stop = (bfd_vma) ((bfd_signed_vma) start + (long) irel->r_offset + 4); break; } if (start > addr && start < toaddr && (stop <= addr || stop >= toaddr)) adjust = count; else if (stop > addr && stop < toaddr && (start <= addr || start >= toaddr)) adjust = - count; else adjust = 0; if (adjust != 0) { oinsn = insn; overflow = FALSE; switch (irel->r_type) { default: abort (); break; case R_SH_PCDISP8BY2: case R_SH_PCRELIMM8BY2: insn += adjust / 2; if ((oinsn & 0xff00) != (insn & 0xff00)) overflow = TRUE; bfd_put_16 (abfd, (bfd_vma) insn, contents + nraddr); break; case R_SH_PCDISP: insn += adjust / 2; if ((oinsn & 0xf000) != (insn & 0xf000)) overflow = TRUE; bfd_put_16 (abfd, (bfd_vma) insn, contents + nraddr); break; case R_SH_PCRELIMM8BY4: BFD_ASSERT (adjust == count || count >= 4); if (count >= 4) insn += adjust / 4; else { if ((irel->r_vaddr & 3) == 0) ++insn; } if ((oinsn & 0xff00) != (insn & 0xff00)) overflow = TRUE; bfd_put_16 (abfd, (bfd_vma) insn, contents + nraddr); break; case R_SH_SWITCH8: voff += adjust; if (voff < 0 || voff >= 0xff) overflow = TRUE; bfd_put_8 (abfd, (bfd_vma) voff, contents + nraddr); break; case R_SH_SWITCH16: voff += adjust; if (voff < - 0x8000 || voff >= 0x8000) overflow = TRUE; bfd_put_signed_16 (abfd, (bfd_vma) voff, contents + nraddr); break; case R_SH_SWITCH32: voff += adjust; bfd_put_signed_32 (abfd, (bfd_vma) voff, contents + nraddr); break; case R_SH_USES: irel->r_offset += adjust; break; } if (overflow) { ((*_bfd_error_handler) ("%B: 0x%lx: fatal: reloc overflow while relaxing", abfd, (unsigned long) irel->r_vaddr)); bfd_set_error (bfd_error_bad_value); return FALSE; } } irel->r_vaddr = nraddr + sec->vma; } /* Look through all the other sections. If there contain any IMM32 relocs against internal symbols which we are not going to adjust below, we may need to adjust the addends. */ for (o = abfd->sections; o != NULL; o = o->next) { struct internal_reloc *internal_relocs; struct internal_reloc *irelscan, *irelscanend; bfd_byte *ocontents; if (o == sec || (o->flags & SEC_RELOC) == 0 || o->reloc_count == 0) continue; /* We always cache the relocs. Perhaps, if info->keep_memory is FALSE, we should free them, if we are permitted to, when we leave sh_coff_relax_section. */ internal_relocs = (_bfd_coff_read_internal_relocs (abfd, o, TRUE, (bfd_byte *) NULL, FALSE, (struct internal_reloc *) NULL)); if (internal_relocs == NULL) return FALSE; ocontents = NULL; irelscanend = internal_relocs + o->reloc_count; for (irelscan = internal_relocs; irelscan < irelscanend; irelscan++) { struct internal_syment sym; #ifdef COFF_WITH_PE if (irelscan->r_type != R_SH_IMM32 && irelscan->r_type != R_SH_IMAGEBASE && irelscan->r_type != R_SH_IMM32CE) #else if (irelscan->r_type != R_SH_IMM32) #endif continue; bfd_coff_swap_sym_in (abfd, ((bfd_byte *) obj_coff_external_syms (abfd) + (irelscan->r_symndx * bfd_coff_symesz (abfd))), &sym); if (sym.n_sclass != C_EXT && sym.n_scnum == sec->target_index && ((bfd_vma) sym.n_value <= addr || (bfd_vma) sym.n_value >= toaddr)) { bfd_vma val; if (ocontents == NULL) { if (coff_section_data (abfd, o)->contents != NULL) ocontents = coff_section_data (abfd, o)->contents; else { if (!bfd_malloc_and_get_section (abfd, o, &ocontents)) return FALSE; /* We always cache the section contents. Perhaps, if info->keep_memory is FALSE, we should free them, if we are permitted to, when we leave sh_coff_relax_section. */ coff_section_data (abfd, o)->contents = ocontents; } } val = bfd_get_32 (abfd, ocontents + irelscan->r_vaddr - o->vma); val += sym.n_value; if (val > addr && val < toaddr) bfd_put_32 (abfd, val - count, ocontents + irelscan->r_vaddr - o->vma); coff_section_data (abfd, o)->keep_contents = TRUE; } } } /* Adjusting the internal symbols will not work if something has already retrieved the generic symbols. It would be possible to make this work by adjusting the generic symbols at the same time. However, this case should not arise in normal usage. */ if (obj_symbols (abfd) != NULL || obj_raw_syments (abfd) != NULL) { ((*_bfd_error_handler) ("%B: fatal: generic symbols retrieved before relaxing", abfd)); bfd_set_error (bfd_error_invalid_operation); return FALSE; } /* Adjust all the symbols. */ sym_hash = obj_coff_sym_hashes (abfd); symesz = bfd_coff_symesz (abfd); esym = (bfd_byte *) obj_coff_external_syms (abfd); esymend = esym + obj_raw_syment_count (abfd) * symesz; while (esym < esymend) { struct internal_syment isym; bfd_coff_swap_sym_in (abfd, (PTR) esym, (PTR) &isym); if (isym.n_scnum == sec->target_index && (bfd_vma) isym.n_value > addr && (bfd_vma) isym.n_value < toaddr) { isym.n_value -= count; bfd_coff_swap_sym_out (abfd, (PTR) &isym, (PTR) esym); if (*sym_hash != NULL) { BFD_ASSERT ((*sym_hash)->root.type == bfd_link_hash_defined || (*sym_hash)->root.type == bfd_link_hash_defweak); BFD_ASSERT ((*sym_hash)->root.u.def.value >= addr && (*sym_hash)->root.u.def.value < toaddr); (*sym_hash)->root.u.def.value -= count; } } esym += (isym.n_numaux + 1) * symesz; sym_hash += isym.n_numaux + 1; } /* See if we can move the ALIGN reloc forward. We have adjusted r_vaddr for it already. */ if (irelalign != NULL) { bfd_vma alignto, alignaddr; alignto = BFD_ALIGN (toaddr, 1 << irelalign->r_offset); alignaddr = BFD_ALIGN (irelalign->r_vaddr - sec->vma, 1 << irelalign->r_offset); if (alignto != alignaddr) { /* Tail recursion. */ return sh_relax_delete_bytes (abfd, sec, alignaddr, (int) (alignto - alignaddr)); } } return TRUE; } /* This is yet another version of the SH opcode table, used to rapidly get information about a particular instruction. */ /* The opcode map is represented by an array of these structures. The array is indexed by the high order four bits in the instruction. */ struct sh_major_opcode { /* A pointer to the instruction list. This is an array which contains all the instructions with this major opcode. */ const struct sh_minor_opcode *minor_opcodes; /* The number of elements in minor_opcodes. */ unsigned short count; }; /* This structure holds information for a set of SH opcodes. The instruction code is anded with the mask value, and the resulting value is used to search the order opcode list. */ struct sh_minor_opcode { /* The sorted opcode list. */ const struct sh_opcode *opcodes; /* The number of elements in opcodes. */ unsigned short count; /* The mask value to use when searching the opcode list. */ unsigned short mask; }; /* This structure holds information for an SH instruction. An array of these structures is sorted in order by opcode. */ struct sh_opcode { /* The code for this instruction, after it has been anded with the mask value in the sh_major_opcode structure. */ unsigned short opcode; /* Flags for this instruction. */ unsigned long flags; }; /* Flag which appear in the sh_opcode structure. */ /* This instruction loads a value from memory. */ #define LOAD (0x1) /* This instruction stores a value to memory. */ #define STORE (0x2) /* This instruction is a branch. */ #define BRANCH (0x4) /* This instruction has a delay slot. */ #define DELAY (0x8) /* This instruction uses the value in the register in the field at mask 0x0f00 of the instruction. */ #define USES1 (0x10) #define USES1_REG(x) ((x & 0x0f00) >> 8) /* This instruction uses the value in the register in the field at mask 0x00f0 of the instruction. */ #define USES2 (0x20) #define USES2_REG(x) ((x & 0x00f0) >> 4) /* This instruction uses the value in register 0. */ #define USESR0 (0x40) /* This instruction sets the value in the register in the field at mask 0x0f00 of the instruction. */ #define SETS1 (0x80) #define SETS1_REG(x) ((x & 0x0f00) >> 8) /* This instruction sets the value in the register in the field at mask 0x00f0 of the instruction. */ #define SETS2 (0x100) #define SETS2_REG(x) ((x & 0x00f0) >> 4) /* This instruction sets register 0. */ #define SETSR0 (0x200) /* This instruction sets a special register. */ #define SETSSP (0x400) /* This instruction uses a special register. */ #define USESSP (0x800) /* This instruction uses the floating point register in the field at mask 0x0f00 of the instruction. */ #define USESF1 (0x1000) #define USESF1_REG(x) ((x & 0x0f00) >> 8) /* This instruction uses the floating point register in the field at mask 0x00f0 of the instruction. */ #define USESF2 (0x2000) #define USESF2_REG(x) ((x & 0x00f0) >> 4) /* This instruction uses floating point register 0. */ #define USESF0 (0x4000) /* This instruction sets the floating point register in the field at mask 0x0f00 of the instruction. */ #define SETSF1 (0x8000) #define SETSF1_REG(x) ((x & 0x0f00) >> 8) #define USESAS (0x10000) #define USESAS_REG(x) (((((x) >> 8) - 2) & 3) + 2) #define USESR8 (0x20000) #define SETSAS (0x40000) #define SETSAS_REG(x) USESAS_REG (x) #define MAP(a) a, sizeof a / sizeof a[0] #ifndef COFF_IMAGE_WITH_PE static bfd_boolean sh_insn_uses_reg PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); static bfd_boolean sh_insn_sets_reg PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); static bfd_boolean sh_insn_uses_or_sets_reg PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); static bfd_boolean sh_insn_uses_freg PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); static bfd_boolean sh_insn_sets_freg PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); static bfd_boolean sh_insn_uses_or_sets_freg PARAMS ((unsigned int, const struct sh_opcode *, unsigned int)); static bfd_boolean sh_insns_conflict PARAMS ((unsigned int, const struct sh_opcode *, unsigned int, const struct sh_opcode *)); static bfd_boolean sh_load_use PARAMS ((unsigned int, const struct sh_opcode *, unsigned int, const struct sh_opcode *)); /* The opcode maps. */ static const struct sh_opcode sh_opcode00[] = { { 0x0008, SETSSP }, /* clrt */ { 0x0009, 0 }, /* nop */ { 0x000b, BRANCH | DELAY | USESSP }, /* rts */ { 0x0018, SETSSP }, /* sett */ { 0x0019, SETSSP }, /* div0u */ { 0x001b, 0 }, /* sleep */ { 0x0028, SETSSP }, /* clrmac */ { 0x002b, BRANCH | DELAY | SETSSP }, /* rte */ { 0x0038, USESSP | SETSSP }, /* ldtlb */ { 0x0048, SETSSP }, /* clrs */ { 0x0058, SETSSP } /* sets */ }; static const struct sh_opcode sh_opcode01[] = { { 0x0003, BRANCH | DELAY | USES1 | SETSSP }, /* bsrf rn */ { 0x000a, SETS1 | USESSP }, /* sts mach,rn */ { 0x001a, SETS1 | USESSP }, /* sts macl,rn */ { 0x0023, BRANCH | DELAY | USES1 }, /* braf rn */ { 0x0029, SETS1 | USESSP }, /* movt rn */ { 0x002a, SETS1 | USESSP }, /* sts pr,rn */ { 0x005a, SETS1 | USESSP }, /* sts fpul,rn */ { 0x006a, SETS1 | USESSP }, /* sts fpscr,rn / sts dsr,rn */ { 0x0083, LOAD | USES1 }, /* pref @rn */ { 0x007a, SETS1 | USESSP }, /* sts a0,rn */ { 0x008a, SETS1 | USESSP }, /* sts x0,rn */ { 0x009a, SETS1 | USESSP }, /* sts x1,rn */ { 0x00aa, SETS1 | USESSP }, /* sts y0,rn */ { 0x00ba, SETS1 | USESSP } /* sts y1,rn */ }; static const struct sh_opcode sh_opcode02[] = { { 0x0002, SETS1 | USESSP }, /* stc <special_reg>,rn */ { 0x0004, STORE | USES1 | USES2 | USESR0 }, /* mov.b rm,@(r0,rn) */ { 0x0005, STORE | USES1 | USES2 | USESR0 }, /* mov.w rm,@(r0,rn) */ { 0x0006, STORE | USES1 | USES2 | USESR0 }, /* mov.l rm,@(r0,rn) */ { 0x0007, SETSSP | USES1 | USES2 }, /* mul.l rm,rn */ { 0x000c, LOAD | SETS1 | USES2 | USESR0 }, /* mov.b @(r0,rm),rn */ { 0x000d, LOAD | SETS1 | USES2 | USESR0 }, /* mov.w @(r0,rm),rn */ { 0x000e, LOAD | SETS1 | USES2 | USESR0 }, /* mov.l @(r0,rm),rn */ { 0x000f, LOAD|SETS1|SETS2|SETSSP|USES1|USES2|USESSP }, /* mac.l @rm+,@rn+ */ }; static const struct sh_minor_opcode sh_opcode0[] = { { MAP (sh_opcode00), 0xffff }, { MAP (sh_opcode01), 0xf0ff }, { MAP (sh_opcode02), 0xf00f } }; static const struct sh_opcode sh_opcode10[] = { { 0x1000, STORE | USES1 | USES2 } /* mov.l rm,@(disp,rn) */ }; static const struct sh_minor_opcode sh_opcode1[] = { { MAP (sh_opcode10), 0xf000 } }; static const struct sh_opcode sh_opcode20[] = { { 0x2000, STORE | USES1 | USES2 }, /* mov.b rm,@rn */ { 0x2001, STORE | USES1 | USES2 }, /* mov.w rm,@rn */ { 0x2002, STORE | USES1 | USES2 }, /* mov.l rm,@rn */ { 0x2004, STORE | SETS1 | USES1 | USES2 }, /* mov.b rm,@-rn */ { 0x2005, STORE | SETS1 | USES1 | USES2 }, /* mov.w rm,@-rn */ { 0x2006, STORE | SETS1 | USES1 | USES2 }, /* mov.l rm,@-rn */ { 0x2007, SETSSP | USES1 | USES2 | USESSP }, /* div0s */ { 0x2008, SETSSP | USES1 | USES2 }, /* tst rm,rn */ { 0x2009, SETS1 | USES1 | USES2 }, /* and rm,rn */ { 0x200a, SETS1 | USES1 | USES2 }, /* xor rm,rn */ { 0x200b, SETS1 | USES1 | USES2 }, /* or rm,rn */ { 0x200c, SETSSP | USES1 | USES2 }, /* cmp/str rm,rn */ { 0x200d, SETS1 | USES1 | USES2 }, /* xtrct rm,rn */ { 0x200e, SETSSP | USES1 | USES2 }, /* mulu.w rm,rn */ { 0x200f, SETSSP | USES1 | USES2 } /* muls.w rm,rn */ }; static const struct sh_minor_opcode sh_opcode2[] = { { MAP (sh_opcode20), 0xf00f } }; static const struct sh_opcode sh_opcode30[] = { { 0x3000, SETSSP | USES1 | USES2 }, /* cmp/eq rm,rn */ { 0x3002, SETSSP | USES1 | USES2 }, /* cmp/hs rm,rn */ { 0x3003, SETSSP | USES1 | USES2 }, /* cmp/ge rm,rn */ { 0x3004, SETSSP | USESSP | USES1 | USES2 }, /* div1 rm,rn */ { 0x3005, SETSSP | USES1 | USES2 }, /* dmulu.l rm,rn */ { 0x3006, SETSSP | USES1 | USES2 }, /* cmp/hi rm,rn */ { 0x3007, SETSSP | USES1 | USES2 }, /* cmp/gt rm,rn */ { 0x3008, SETS1 | USES1 | USES2 }, /* sub rm,rn */ { 0x300a, SETS1 | SETSSP | USES1 | USES2 | USESSP }, /* subc rm,rn */ { 0x300b, SETS1 | SETSSP | USES1 | USES2 }, /* subv rm,rn */ { 0x300c, SETS1 | USES1 | USES2 }, /* add rm,rn */ { 0x300d, SETSSP | USES1 | USES2 }, /* dmuls.l rm,rn */ { 0x300e, SETS1 | SETSSP | USES1 | USES2 | USESSP }, /* addc rm,rn */ { 0x300f, SETS1 | SETSSP | USES1 | USES2 } /* addv rm,rn */ }; static const struct sh_minor_opcode sh_opcode3[] = { { MAP (sh_opcode30), 0xf00f } }; static const struct sh_opcode sh_opcode40[] = { { 0x4000, SETS1 | SETSSP | USES1 }, /* shll rn */ { 0x4001, SETS1 | SETSSP | USES1 }, /* shlr rn */ { 0x4002, STORE | SETS1 | USES1 | USESSP }, /* sts.l mach,@-rn */ { 0x4004, SETS1 | SETSSP | USES1 }, /* rotl rn */ { 0x4005, SETS1 | SETSSP | USES1 }, /* rotr rn */ { 0x4006, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,mach */ { 0x4008, SETS1 | USES1 }, /* shll2 rn */ { 0x4009, SETS1 | USES1 }, /* shlr2 rn */ { 0x400a, SETSSP | USES1 }, /* lds rm,mach */ { 0x400b, BRANCH | DELAY | USES1 }, /* jsr @rn */ { 0x4010, SETS1 | SETSSP | USES1 }, /* dt rn */ { 0x4011, SETSSP | USES1 }, /* cmp/pz rn */ { 0x4012, STORE | SETS1 | USES1 | USESSP }, /* sts.l macl,@-rn */ { 0x4014, SETSSP | USES1 }, /* setrc rm */ { 0x4015, SETSSP | USES1 }, /* cmp/pl rn */ { 0x4016, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,macl */ { 0x4018, SETS1 | USES1 }, /* shll8 rn */ { 0x4019, SETS1 | USES1 }, /* shlr8 rn */ { 0x401a, SETSSP | USES1 }, /* lds rm,macl */ { 0x401b, LOAD | SETSSP | USES1 }, /* tas.b @rn */ { 0x4020, SETS1 | SETSSP | USES1 }, /* shal rn */ { 0x4021, SETS1 | SETSSP | USES1 }, /* shar rn */ { 0x4022, STORE | SETS1 | USES1 | USESSP }, /* sts.l pr,@-rn */ { 0x4024, SETS1 | SETSSP | USES1 | USESSP }, /* rotcl rn */ { 0x4025, SETS1 | SETSSP | USES1 | USESSP }, /* rotcr rn */ { 0x4026, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,pr */ { 0x4028, SETS1 | USES1 }, /* shll16 rn */ { 0x4029, SETS1 | USES1 }, /* shlr16 rn */ { 0x402a, SETSSP | USES1 }, /* lds rm,pr */ { 0x402b, BRANCH | DELAY | USES1 }, /* jmp @rn */ { 0x4052, STORE | SETS1 | USES1 | USESSP }, /* sts.l fpul,@-rn */ { 0x4056, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,fpul */ { 0x405a, SETSSP | USES1 }, /* lds.l rm,fpul */ { 0x4062, STORE | SETS1 | USES1 | USESSP }, /* sts.l fpscr / dsr,@-rn */ { 0x4066, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,fpscr / dsr */ { 0x406a, SETSSP | USES1 }, /* lds rm,fpscr / lds rm,dsr */ { 0x4072, STORE | SETS1 | USES1 | USESSP }, /* sts.l a0,@-rn */ { 0x4076, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,a0 */ { 0x407a, SETSSP | USES1 }, /* lds.l rm,a0 */ { 0x4082, STORE | SETS1 | USES1 | USESSP }, /* sts.l x0,@-rn */ { 0x4086, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,x0 */ { 0x408a, SETSSP | USES1 }, /* lds.l rm,x0 */ { 0x4092, STORE | SETS1 | USES1 | USESSP }, /* sts.l x1,@-rn */ { 0x4096, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,x1 */ { 0x409a, SETSSP | USES1 }, /* lds.l rm,x1 */ { 0x40a2, STORE | SETS1 | USES1 | USESSP }, /* sts.l y0,@-rn */ { 0x40a6, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,y0 */ { 0x40aa, SETSSP | USES1 }, /* lds.l rm,y0 */ { 0x40b2, STORE | SETS1 | USES1 | USESSP }, /* sts.l y1,@-rn */ { 0x40b6, LOAD | SETS1 | SETSSP | USES1 }, /* lds.l @rm+,y1 */ { 0x40ba, SETSSP | USES1 } /* lds.l rm,y1 */ }; static const struct sh_opcode sh_opcode41[] = { { 0x4003, STORE | SETS1 | USES1 | USESSP }, /* stc.l <special_reg>,@-rn */ { 0x4007, LOAD | SETS1 | SETSSP | USES1 }, /* ldc.l @rm+,<special_reg> */ { 0x400c, SETS1 | USES1 | USES2 }, /* shad rm,rn */ { 0x400d, SETS1 | USES1 | USES2 }, /* shld rm,rn */ { 0x400e, SETSSP | USES1 }, /* ldc rm,<special_reg> */ { 0x400f, LOAD|SETS1|SETS2|SETSSP|USES1|USES2|USESSP }, /* mac.w @rm+,@rn+ */ }; static const struct sh_minor_opcode sh_opcode4[] = { { MAP (sh_opcode40), 0xf0ff }, { MAP (sh_opcode41), 0xf00f } }; static const struct sh_opcode sh_opcode50[] = { { 0x5000, LOAD | SETS1 | USES2 } /* mov.l @(disp,rm),rn */ }; static const struct sh_minor_opcode sh_opcode5[] = { { MAP (sh_opcode50), 0xf000 } }; static const struct sh_opcode sh_opcode60[] = { { 0x6000, LOAD | SETS1 | USES2 }, /* mov.b @rm,rn */ { 0x6001, LOAD | SETS1 | USES2 }, /* mov.w @rm,rn */ { 0x6002, LOAD | SETS1 | USES2 }, /* mov.l @rm,rn */ { 0x6003, SETS1 | USES2 }, /* mov rm,rn */ { 0x6004, LOAD | SETS1 | SETS2 | USES2 }, /* mov.b @rm+,rn */ { 0x6005, LOAD | SETS1 | SETS2 | USES2 }, /* mov.w @rm+,rn */ { 0x6006, LOAD | SETS1 | SETS2 | USES2 }, /* mov.l @rm+,rn */ { 0x6007, SETS1 | USES2 }, /* not rm,rn */ { 0x6008, SETS1 | USES2 }, /* swap.b rm,rn */ { 0x6009, SETS1 | USES2 }, /* swap.w rm,rn */ { 0x600a, SETS1 | SETSSP | USES2 | USESSP }, /* negc rm,rn */ { 0x600b, SETS1 | USES2 }, /* neg rm,rn */ { 0x600c, SETS1 | USES2 }, /* extu.b rm,rn */ { 0x600d, SETS1 | USES2 }, /* extu.w rm,rn */ { 0x600e, SETS1 | USES2 }, /* exts.b rm,rn */ { 0x600f, SETS1 | USES2 } /* exts.w rm,rn */ }; static const struct sh_minor_opcode sh_opcode6[] = { { MAP (sh_opcode60), 0xf00f } }; static const struct sh_opcode sh_opcode70[] = { { 0x7000, SETS1 | USES1 } /* add #imm,rn */ }; static const struct sh_minor_opcode sh_opcode7[] = { { MAP (sh_opcode70), 0xf000 } }; static const struct sh_opcode sh_opcode80[] = { { 0x8000, STORE | USES2 | USESR0 }, /* mov.b r0,@(disp,rn) */ { 0x8100, STORE | USES2 | USESR0 }, /* mov.w r0,@(disp,rn) */ { 0x8200, SETSSP }, /* setrc #imm */ { 0x8400, LOAD | SETSR0 | USES2 }, /* mov.b @(disp,rm),r0 */ { 0x8500, LOAD | SETSR0 | USES2 }, /* mov.w @(disp,rn),r0 */ { 0x8800, SETSSP | USESR0 }, /* cmp/eq #imm,r0 */ { 0x8900, BRANCH | USESSP }, /* bt label */ { 0x8b00, BRANCH | USESSP }, /* bf label */ { 0x8c00, SETSSP }, /* ldrs @(disp,pc) */ { 0x8d00, BRANCH | DELAY | USESSP }, /* bt/s label */ { 0x8e00, SETSSP }, /* ldre @(disp,pc) */ { 0x8f00, BRANCH | DELAY | USESSP } /* bf/s label */ }; static const struct sh_minor_opcode sh_opcode8[] = { { MAP (sh_opcode80), 0xff00 } }; static const struct sh_opcode sh_opcode90[] = { { 0x9000, LOAD | SETS1 } /* mov.w @(disp,pc),rn */ }; static const struct sh_minor_opcode sh_opcode9[] = { { MAP (sh_opcode90), 0xf000 } }; static const struct sh_opcode sh_opcodea0[] = { { 0xa000, BRANCH | DELAY } /* bra label */ }; static const struct sh_minor_opcode sh_opcodea[] = { { MAP (sh_opcodea0), 0xf000 } }; static const struct sh_opcode sh_opcodeb0[] = { { 0xb000, BRANCH | DELAY } /* bsr label */ }; static const struct sh_minor_opcode sh_opcodeb[] = { { MAP (sh_opcodeb0), 0xf000 } }; static const struct sh_opcode sh_opcodec0[] = { { 0xc000, STORE | USESR0 | USESSP }, /* mov.b r0,@(disp,gbr) */ { 0xc100, STORE | USESR0 | USESSP }, /* mov.w r0,@(disp,gbr) */ { 0xc200, STORE | USESR0 | USESSP }, /* mov.l r0,@(disp,gbr) */ { 0xc300, BRANCH | USESSP }, /* trapa #imm */ { 0xc400, LOAD | SETSR0 | USESSP }, /* mov.b @(disp,gbr),r0 */ { 0xc500, LOAD | SETSR0 | USESSP }, /* mov.w @(disp,gbr),r0 */ { 0xc600, LOAD | SETSR0 | USESSP }, /* mov.l @(disp,gbr),r0 */ { 0xc700, SETSR0 }, /* mova @(disp,pc),r0 */ { 0xc800, SETSSP | USESR0 }, /* tst #imm,r0 */ { 0xc900, SETSR0 | USESR0 }, /* and #imm,r0 */ { 0xca00, SETSR0 | USESR0 }, /* xor #imm,r0 */ { 0xcb00, SETSR0 | USESR0 }, /* or #imm,r0 */ { 0xcc00, LOAD | SETSSP | USESR0 | USESSP }, /* tst.b #imm,@(r0,gbr) */ { 0xcd00, LOAD | STORE | USESR0 | USESSP }, /* and.b #imm,@(r0,gbr) */ { 0xce00, LOAD | STORE | USESR0 | USESSP }, /* xor.b #imm,@(r0,gbr) */ { 0xcf00, LOAD | STORE | USESR0 | USESSP } /* or.b #imm,@(r0,gbr) */ }; static const struct sh_minor_opcode sh_opcodec[] = { { MAP (sh_opcodec0), 0xff00 } }; static const struct sh_opcode sh_opcoded0[] = { { 0xd000, LOAD | SETS1 } /* mov.l @(disp,pc),rn */ }; static const struct sh_minor_opcode sh_opcoded[] = { { MAP (sh_opcoded0), 0xf000 } }; static const struct sh_opcode sh_opcodee0[] = { { 0xe000, SETS1 } /* mov #imm,rn */ }; static const struct sh_minor_opcode sh_opcodee[] = { { MAP (sh_opcodee0), 0xf000 } }; static const struct sh_opcode sh_opcodef0[] = { { 0xf000, SETSF1 | USESF1 | USESF2 }, /* fadd fm,fn */ { 0xf001, SETSF1 | USESF1 | USESF2 }, /* fsub fm,fn */ { 0xf002, SETSF1 | USESF1 | USESF2 }, /* fmul fm,fn */ { 0xf003, SETSF1 | USESF1 | USESF2 }, /* fdiv fm,fn */ { 0xf004, SETSSP | USESF1 | USESF2 }, /* fcmp/eq fm,fn */ { 0xf005, SETSSP | USESF1 | USESF2 }, /* fcmp/gt fm,fn */ { 0xf006, LOAD | SETSF1 | USES2 | USESR0 }, /* fmov.s @(r0,rm),fn */ { 0xf007, STORE | USES1 | USESF2 | USESR0 }, /* fmov.s fm,@(r0,rn) */ { 0xf008, LOAD | SETSF1 | USES2 }, /* fmov.s @rm,fn */ { 0xf009, LOAD | SETS2 | SETSF1 | USES2 }, /* fmov.s @rm+,fn */ { 0xf00a, STORE | USES1 | USESF2 }, /* fmov.s fm,@rn */ { 0xf00b, STORE | SETS1 | USES1 | USESF2 }, /* fmov.s fm,@-rn */ { 0xf00c, SETSF1 | USESF2 }, /* fmov fm,fn */ { 0xf00e, SETSF1 | USESF1 | USESF2 | USESF0 } /* fmac f0,fm,fn */ }; static const struct sh_opcode sh_opcodef1[] = { { 0xf00d, SETSF1 | USESSP }, /* fsts fpul,fn */ { 0xf01d, SETSSP | USESF1 }, /* flds fn,fpul */ { 0xf02d, SETSF1 | USESSP }, /* float fpul,fn */ { 0xf03d, SETSSP | USESF1 }, /* ftrc fn,fpul */ { 0xf04d, SETSF1 | USESF1 }, /* fneg fn */ { 0xf05d, SETSF1 | USESF1 }, /* fabs fn */ { 0xf06d, SETSF1 | USESF1 }, /* fsqrt fn */ { 0xf07d, SETSSP | USESF1 }, /* ftst/nan fn */ { 0xf08d, SETSF1 }, /* fldi0 fn */ { 0xf09d, SETSF1 } /* fldi1 fn */ }; static const struct sh_minor_opcode sh_opcodef[] = { { MAP (sh_opcodef0), 0xf00f }, { MAP (sh_opcodef1), 0xf0ff } }; static struct sh_major_opcode sh_opcodes[] = { { MAP (sh_opcode0) }, { MAP (sh_opcode1) }, { MAP (sh_opcode2) }, { MAP (sh_opcode3) }, { MAP (sh_opcode4) }, { MAP (sh_opcode5) }, { MAP (sh_opcode6) }, { MAP (sh_opcode7) }, { MAP (sh_opcode8) }, { MAP (sh_opcode9) }, { MAP (sh_opcodea) }, { MAP (sh_opcodeb) }, { MAP (sh_opcodec) }, { MAP (sh_opcoded) }, { MAP (sh_opcodee) }, { MAP (sh_opcodef) } }; /* The double data transfer / parallel processing insns are not described here. This will cause sh_align_load_span to leave them alone. */ static const struct sh_opcode sh_dsp_opcodef0[] = { { 0xf400, USESAS | SETSAS | LOAD | SETSSP }, /* movs.x @-as,ds */ { 0xf401, USESAS | SETSAS | STORE | USESSP }, /* movs.x ds,@-as */ { 0xf404, USESAS | LOAD | SETSSP }, /* movs.x @as,ds */ { 0xf405, USESAS | STORE | USESSP }, /* movs.x ds,@as */ { 0xf408, USESAS | SETSAS | LOAD | SETSSP }, /* movs.x @as+,ds */ { 0xf409, USESAS | SETSAS | STORE | USESSP }, /* movs.x ds,@as+ */ { 0xf40c, USESAS | SETSAS | LOAD | SETSSP | USESR8 }, /* movs.x @as+r8,ds */ { 0xf40d, USESAS | SETSAS | STORE | USESSP | USESR8 } /* movs.x ds,@as+r8 */ }; static const struct sh_minor_opcode sh_dsp_opcodef[] = { { MAP (sh_dsp_opcodef0), 0xfc0d } }; /* Given an instruction, return a pointer to the corresponding sh_opcode structure. Return NULL if the instruction is not recognized. */ static const struct sh_opcode * sh_insn_info (insn) unsigned int insn; { const struct sh_major_opcode *maj; const struct sh_minor_opcode *min, *minend; maj = &sh_opcodes[(insn & 0xf000) >> 12]; min = maj->minor_opcodes; minend = min + maj->count; for (; min < minend; min++) { unsigned int l; const struct sh_opcode *op, *opend; l = insn & min->mask; op = min->opcodes; opend = op + min->count; /* Since the opcodes tables are sorted, we could use a binary search here if the count were above some cutoff value. */ for (; op < opend; op++) if (op->opcode == l) return op; } return NULL; } /* See whether an instruction uses or sets a general purpose register */ static bfd_boolean sh_insn_uses_or_sets_reg (insn, op, reg) unsigned int insn; const struct sh_opcode *op; unsigned int reg; { if (sh_insn_uses_reg (insn, op, reg)) return TRUE; return sh_insn_sets_reg (insn, op, reg); } /* See whether an instruction uses a general purpose register. */ static bfd_boolean sh_insn_uses_reg (insn, op, reg) unsigned int insn; const struct sh_opcode *op; unsigned int reg; { unsigned int f; f = op->flags; if ((f & USES1) != 0 && USES1_REG (insn) == reg) return TRUE; if ((f & USES2) != 0 && USES2_REG (insn) == reg) return TRUE; if ((f & USESR0) != 0 && reg == 0) return TRUE; if ((f & USESAS) && reg == USESAS_REG (insn)) return TRUE; if ((f & USESR8) && reg == 8) return TRUE; return FALSE; } /* See whether an instruction sets a general purpose register. */ static bfd_boolean sh_insn_sets_reg (insn, op, reg) unsigned int insn; const struct sh_opcode *op; unsigned int reg; { unsigned int f; f = op->flags; if ((f & SETS1) != 0 && SETS1_REG (insn) == reg) return TRUE; if ((f & SETS2) != 0 && SETS2_REG (insn) == reg) return TRUE; if ((f & SETSR0) != 0 && reg == 0) return TRUE; if ((f & SETSAS) && reg == SETSAS_REG (insn)) return TRUE; return FALSE; } /* See whether an instruction uses or sets a floating point register */ static bfd_boolean sh_insn_uses_or_sets_freg (insn, op, reg) unsigned int insn; const struct sh_opcode *op; unsigned int reg; { if (sh_insn_uses_freg (insn, op, reg)) return TRUE; return sh_insn_sets_freg (insn, op, reg); } /* See whether an instruction uses a floating point register. */ static bfd_boolean sh_insn_uses_freg (insn, op, freg) unsigned int insn; const struct sh_opcode *op; unsigned int freg; { unsigned int f; f = op->flags; /* We can't tell if this is a double-precision insn, so just play safe and assume that it might be. So not only have we test FREG against itself, but also even FREG against FREG+1 - if the using insn uses just the low part of a double precision value - but also an odd FREG against FREG-1 - if the setting insn sets just the low part of a double precision value. So what this all boils down to is that we have to ignore the lowest bit of the register number. */ if ((f & USESF1) != 0 && (USESF1_REG (insn) & 0xe) == (freg & 0xe)) return TRUE; if ((f & USESF2) != 0 && (USESF2_REG (insn) & 0xe) == (freg & 0xe)) return TRUE; if ((f & USESF0) != 0 && freg == 0) return TRUE; return FALSE; } /* See whether an instruction sets a floating point register. */ static bfd_boolean sh_insn_sets_freg (insn, op, freg) unsigned int insn; const struct sh_opcode *op; unsigned int freg; { unsigned int f; f = op->flags; /* We can't tell if this is a double-precision insn, so just play safe and assume that it might be. So not only have we test FREG against itself, but also even FREG against FREG+1 - if the using insn uses just the low part of a double precision value - but also an odd FREG against FREG-1 - if the setting insn sets just the low part of a double precision value. So what this all boils down to is that we have to ignore the lowest bit of the register number. */ if ((f & SETSF1) != 0 && (SETSF1_REG (insn) & 0xe) == (freg & 0xe)) return TRUE; return FALSE; } /* See whether instructions I1 and I2 conflict, assuming I1 comes before I2. OP1 and OP2 are the corresponding sh_opcode structures. This should return TRUE if there is a conflict, or FALSE if the instructions can be swapped safely. */ static bfd_boolean sh_insns_conflict (i1, op1, i2, op2) unsigned int i1; const struct sh_opcode *op1; unsigned int i2; const struct sh_opcode *op2; { unsigned int f1, f2; f1 = op1->flags; f2 = op2->flags; /* Load of fpscr conflicts with floating point operations. FIXME: shouldn't test raw opcodes here. */ if (((i1 & 0xf0ff) == 0x4066 && (i2 & 0xf000) == 0xf000) || ((i2 & 0xf0ff) == 0x4066 && (i1 & 0xf000) == 0xf000)) return TRUE; if ((f1 & (BRANCH | DELAY)) != 0 || (f2 & (BRANCH | DELAY)) != 0) return TRUE; if (((f1 | f2) & SETSSP) && (f1 & (SETSSP | USESSP)) && (f2 & (SETSSP | USESSP))) return TRUE; if ((f1 & SETS1) != 0 && sh_insn_uses_or_sets_reg (i2, op2, SETS1_REG (i1))) return TRUE; if ((f1 & SETS2) != 0 && sh_insn_uses_or_sets_reg (i2, op2, SETS2_REG (i1))) return TRUE; if ((f1 & SETSR0) != 0 && sh_insn_uses_or_sets_reg (i2, op2, 0)) return TRUE; if ((f1 & SETSAS) && sh_insn_uses_or_sets_reg (i2, op2, SETSAS_REG (i1))) return TRUE; if ((f1 & SETSF1) != 0 && sh_insn_uses_or_sets_freg (i2, op2, SETSF1_REG (i1))) return TRUE; if ((f2 & SETS1) != 0 && sh_insn_uses_or_sets_reg (i1, op1, SETS1_REG (i2))) return TRUE; if ((f2 & SETS2) != 0 && sh_insn_uses_or_sets_reg (i1, op1, SETS2_REG (i2))) return TRUE; if ((f2 & SETSR0) != 0 && sh_insn_uses_or_sets_reg (i1, op1, 0)) return TRUE; if ((f2 & SETSAS) && sh_insn_uses_or_sets_reg (i1, op1, SETSAS_REG (i2))) return TRUE; if ((f2 & SETSF1) != 0 && sh_insn_uses_or_sets_freg (i1, op1, SETSF1_REG (i2))) return TRUE; /* The instructions do not conflict. */ return FALSE; } /* I1 is a load instruction, and I2 is some other instruction. Return TRUE if I1 loads a register which I2 uses. */ static bfd_boolean sh_load_use (i1, op1, i2, op2) unsigned int i1; const struct sh_opcode *op1; unsigned int i2; const struct sh_opcode *op2; { unsigned int f1; f1 = op1->flags; if ((f1 & LOAD) == 0) return FALSE; /* If both SETS1 and SETSSP are set, that means a load to a special register using postincrement addressing mode, which we don't care about here. */ if ((f1 & SETS1) != 0 && (f1 & SETSSP) == 0 && sh_insn_uses_reg (i2, op2, (i1 & 0x0f00) >> 8)) return TRUE; if ((f1 & SETSR0) != 0 && sh_insn_uses_reg (i2, op2, 0)) return TRUE; if ((f1 & SETSF1) != 0 && sh_insn_uses_freg (i2, op2, (i1 & 0x0f00) >> 8)) return TRUE; return FALSE; } /* Try to align loads and stores within a span of memory. This is called by both the ELF and the COFF sh targets. ABFD and SEC are the BFD and section we are examining. CONTENTS is the contents of the section. SWAP is the routine to call to swap two instructions. RELOCS is a pointer to the internal relocation information, to be passed to SWAP. PLABEL is a pointer to the current label in a sorted list of labels; LABEL_END is the end of the list. START and STOP are the range of memory to examine. If a swap is made, *PSWAPPED is set to TRUE. */ #ifdef COFF_WITH_PE static #endif bfd_boolean _bfd_sh_align_load_span (abfd, sec, contents, swap, relocs, plabel, label_end, start, stop, pswapped) bfd *abfd; asection *sec; bfd_byte *contents; bfd_boolean (*swap) PARAMS ((bfd *, asection *, PTR, bfd_byte *, bfd_vma)); PTR relocs; bfd_vma **plabel; bfd_vma *label_end; bfd_vma start; bfd_vma stop; bfd_boolean *pswapped; { int dsp = (abfd->arch_info->mach == bfd_mach_sh_dsp || abfd->arch_info->mach == bfd_mach_sh3_dsp); bfd_vma i; /* The SH4 has a Harvard architecture, hence aligning loads is not desirable. In fact, it is counter-productive, since it interferes with the schedules generated by the compiler. */ if (abfd->arch_info->mach == bfd_mach_sh4) return TRUE; /* If we are linking sh[3]-dsp code, swap the FPU instructions for DSP instructions. */ if (dsp) { sh_opcodes[0xf].minor_opcodes = sh_dsp_opcodef; sh_opcodes[0xf].count = sizeof sh_dsp_opcodef / sizeof sh_dsp_opcodef; } /* Instructions should be aligned on 2 byte boundaries. */ if ((start & 1) == 1) ++start; /* Now look through the unaligned addresses. */ i = start; if ((i & 2) == 0) i += 2; for (; i < stop; i += 4) { unsigned int insn; const struct sh_opcode *op; unsigned int prev_insn = 0; const struct sh_opcode *prev_op = NULL; insn = bfd_get_16 (abfd, contents + i); op = sh_insn_info (insn); if (op == NULL || (op->flags & (LOAD | STORE)) == 0) continue; /* This is a load or store which is not on a four byte boundary. */ while (*plabel < label_end && **plabel < i) ++*plabel; if (i > start) { prev_insn = bfd_get_16 (abfd, contents + i - 2); /* If INSN is the field b of a parallel processing insn, it is not a load / store after all. Note that the test here might mistake the field_b of a pcopy insn for the starting code of a parallel processing insn; this might miss a swapping opportunity, but at least we're on the safe side. */ if (dsp && (prev_insn & 0xfc00) == 0xf800) continue; /* Check if prev_insn is actually the field b of a parallel processing insn. Again, this can give a spurious match after a pcopy. */ if (dsp && i - 2 > start) { unsigned pprev_insn = bfd_get_16 (abfd, contents + i - 4); if ((pprev_insn & 0xfc00) == 0xf800) prev_op = NULL; else prev_op = sh_insn_info (prev_insn); } else prev_op = sh_insn_info (prev_insn); /* If the load/store instruction is in a delay slot, we can't swap. */ if (prev_op == NULL || (prev_op->flags & DELAY) != 0) continue; } if (i > start && (*plabel >= label_end || **plabel != i) && prev_op != NULL && (prev_op->flags & (LOAD | STORE)) == 0 && ! sh_insns_conflict (prev_insn, prev_op, insn, op)) { bfd_boolean ok; /* The load/store instruction does not have a label, and there is a previous instruction; PREV_INSN is not itself a load/store instruction, and PREV_INSN and INSN do not conflict. */ ok = TRUE; if (i >= start + 4) { unsigned int prev2_insn; const struct sh_opcode *prev2_op; prev2_insn = bfd_get_16 (abfd, contents + i - 4); prev2_op = sh_insn_info (prev2_insn); /* If the instruction before PREV_INSN has a delay slot--that is, PREV_INSN is in a delay slot--we can not swap. */ if (prev2_op == NULL || (prev2_op->flags & DELAY) != 0) ok = FALSE; /* If the instruction before PREV_INSN is a load, and it sets a register which INSN uses, then putting INSN immediately after PREV_INSN will cause a pipeline bubble, so there is no point to making the swap. */ if (ok && (prev2_op->flags & LOAD) != 0 && sh_load_use (prev2_insn, prev2_op, insn, op)) ok = FALSE; } if (ok) { if (! (*swap) (abfd, sec, relocs, contents, i - 2)) return FALSE; *pswapped = TRUE; continue; } } while (*plabel < label_end && **plabel < i + 2) ++*plabel; if (i + 2 < stop && (*plabel >= label_end || **plabel != i + 2)) { unsigned int next_insn; const struct sh_opcode *next_op; /* There is an instruction after the load/store instruction, and it does not have a label. */ next_insn = bfd_get_16 (abfd, contents + i + 2); next_op = sh_insn_info (next_insn); if (next_op != NULL && (next_op->flags & (LOAD | STORE)) == 0 && ! sh_insns_conflict (insn, op, next_insn, next_op)) { bfd_boolean ok; /* NEXT_INSN is not itself a load/store instruction, and it does not conflict with INSN. */ ok = TRUE; /* If PREV_INSN is a load, and it sets a register which NEXT_INSN uses, then putting NEXT_INSN immediately after PREV_INSN will cause a pipeline bubble, so there is no reason to make this swap. */ if (prev_op != NULL && (prev_op->flags & LOAD) != 0 && sh_load_use (prev_insn, prev_op, next_insn, next_op)) ok = FALSE; /* If INSN is a load, and it sets a register which the insn after NEXT_INSN uses, then doing the swap will cause a pipeline bubble, so there is no reason to make the swap. However, if the insn after NEXT_INSN is itself a load or store instruction, then it is misaligned, so optimistically hope that it will be swapped itself, and just live with the pipeline bubble if it isn't. */ if (ok && i + 4 < stop && (op->flags & LOAD) != 0) { unsigned int next2_insn; const struct sh_opcode *next2_op; next2_insn = bfd_get_16 (abfd, contents + i + 4); next2_op = sh_insn_info (next2_insn); if (next2_op == NULL || ((next2_op->flags & (LOAD | STORE)) == 0 && sh_load_use (insn, op, next2_insn, next2_op))) ok = FALSE; } if (ok) { if (! (*swap) (abfd, sec, relocs, contents, i)) return FALSE; *pswapped = TRUE; continue; } } } } return TRUE; } #endif /* not COFF_IMAGE_WITH_PE */ /* Look for loads and stores which we can align to four byte boundaries. See the longer comment above sh_relax_section for why this is desirable. This sets *PSWAPPED if some instruction was swapped. */ static bfd_boolean sh_align_loads (abfd, sec, internal_relocs, contents, pswapped) bfd *abfd; asection *sec; struct internal_reloc *internal_relocs; bfd_byte *contents; bfd_boolean *pswapped; { struct internal_reloc *irel, *irelend; bfd_vma *labels = NULL; bfd_vma *label, *label_end; bfd_size_type amt; *pswapped = FALSE; irelend = internal_relocs + sec->reloc_count; /* Get all the addresses with labels on them. */ amt = (bfd_size_type) sec->reloc_count * sizeof (bfd_vma); labels = (bfd_vma *) bfd_malloc (amt); if (labels == NULL) goto error_return; label_end = labels; for (irel = internal_relocs; irel < irelend; irel++) { if (irel->r_type == R_SH_LABEL) { *label_end = irel->r_vaddr - sec->vma; ++label_end; } } /* Note that the assembler currently always outputs relocs in address order. If that ever changes, this code will need to sort the label values and the relocs. */ label = labels; for (irel = internal_relocs; irel < irelend; irel++) { bfd_vma start, stop; if (irel->r_type != R_SH_CODE) continue; start = irel->r_vaddr - sec->vma; for (irel++; irel < irelend; irel++) if (irel->r_type == R_SH_DATA) break; if (irel < irelend) stop = irel->r_vaddr - sec->vma; else stop = sec->size; if (! _bfd_sh_align_load_span (abfd, sec, contents, sh_swap_insns, (PTR) internal_relocs, &label, label_end, start, stop, pswapped)) goto error_return; } free (labels); return TRUE; error_return: if (labels != NULL) free (labels); return FALSE; } /* Swap two SH instructions. */ static bfd_boolean sh_swap_insns (abfd, sec, relocs, contents, addr) bfd *abfd; asection *sec; PTR relocs; bfd_byte *contents; bfd_vma addr; { struct internal_reloc *internal_relocs = (struct internal_reloc *) relocs; unsigned short i1, i2; struct internal_reloc *irel, *irelend; /* Swap the instructions themselves. */ i1 = bfd_get_16 (abfd, contents + addr); i2 = bfd_get_16 (abfd, contents + addr + 2); bfd_put_16 (abfd, (bfd_vma) i2, contents + addr); bfd_put_16 (abfd, (bfd_vma) i1, contents + addr + 2); /* Adjust all reloc addresses. */ irelend = internal_relocs + sec->reloc_count; for (irel = internal_relocs; irel < irelend; irel++) { int type, add; /* There are a few special types of relocs that we don't want to adjust. These relocs do not apply to the instruction itself, but are only associated with the address. */ type = irel->r_type; if (type == R_SH_ALIGN || type == R_SH_CODE || type == R_SH_DATA || type == R_SH_LABEL) continue; /* If an R_SH_USES reloc points to one of the addresses being swapped, we must adjust it. It would be incorrect to do this for a jump, though, since we want to execute both instructions after the jump. (We have avoided swapping around a label, so the jump will not wind up executing an instruction it shouldn't). */ if (type == R_SH_USES) { bfd_vma off; off = irel->r_vaddr - sec->vma + 4 + irel->r_offset; if (off == addr) irel->r_offset += 2; else if (off == addr + 2) irel->r_offset -= 2; } if (irel->r_vaddr - sec->vma == addr) { irel->r_vaddr += 2; add = -2; } else if (irel->r_vaddr - sec->vma == addr + 2) { irel->r_vaddr -= 2; add = 2; } else add = 0; if (add != 0) { bfd_byte *loc; unsigned short insn, oinsn; bfd_boolean overflow; loc = contents + irel->r_vaddr - sec->vma; overflow = FALSE; switch (type) { default: break; case R_SH_PCDISP8BY2: case R_SH_PCRELIMM8BY2: insn = bfd_get_16 (abfd, loc); oinsn = insn; insn += add / 2; if ((oinsn & 0xff00) != (insn & 0xff00)) overflow = TRUE; bfd_put_16 (abfd, (bfd_vma) insn, loc); break; case R_SH_PCDISP: insn = bfd_get_16 (abfd, loc); oinsn = insn; insn += add / 2; if ((oinsn & 0xf000) != (insn & 0xf000)) overflow = TRUE; bfd_put_16 (abfd, (bfd_vma) insn, loc); break; case R_SH_PCRELIMM8BY4: /* This reloc ignores the least significant 3 bits of the program counter before adding in the offset. This means that if ADDR is at an even address, the swap will not affect the offset. If ADDR is an at an odd address, then the instruction will be crossing a four byte boundary, and must be adjusted. */ if ((addr & 3) != 0) { insn = bfd_get_16 (abfd, loc); oinsn = insn; insn += add / 2; if ((oinsn & 0xff00) != (insn & 0xff00)) overflow = TRUE; bfd_put_16 (abfd, (bfd_vma) insn, loc); } break; } if (overflow) { ((*_bfd_error_handler) ("%B: 0x%lx: fatal: reloc overflow while relaxing", abfd, (unsigned long) irel->r_vaddr)); bfd_set_error (bfd_error_bad_value); return FALSE; } } } return TRUE; } /* This is a modification of _bfd_coff_generic_relocate_section, which will handle SH relaxing. */ static bfd_boolean sh_relocate_section (output_bfd, info, input_bfd, input_section, contents, relocs, syms, sections) bfd *output_bfd ATTRIBUTE_UNUSED; struct bfd_link_info *info; bfd *input_bfd; asection *input_section; bfd_byte *contents; struct internal_reloc *relocs; struct internal_syment *syms; asection **sections; { struct internal_reloc *rel; struct internal_reloc *relend; rel = relocs; relend = rel + input_section->reloc_count; for (; rel < relend; rel++) { long symndx; struct coff_link_hash_entry *h; struct internal_syment *sym; bfd_vma addend; bfd_vma val; reloc_howto_type *howto; bfd_reloc_status_type rstat; /* Almost all relocs have to do with relaxing. If any work must be done for them, it has been done in sh_relax_section. */ if (rel->r_type != R_SH_IMM32 #ifdef COFF_WITH_PE && rel->r_type != R_SH_IMM32CE && rel->r_type != R_SH_IMAGEBASE #endif && rel->r_type != R_SH_PCDISP) continue; symndx = rel->r_symndx; if (symndx == -1) { h = NULL; sym = NULL; } else { if (symndx < 0 || (unsigned long) symndx >= obj_raw_syment_count (input_bfd)) { (*_bfd_error_handler) ("%B: illegal symbol index %ld in relocs", input_bfd, symndx); bfd_set_error (bfd_error_bad_value); return FALSE; } h = obj_coff_sym_hashes (input_bfd)[symndx]; sym = syms + symndx; } if (sym != NULL && sym->n_scnum != 0) addend = - sym->n_value; else addend = 0; if (rel->r_type == R_SH_PCDISP) addend -= 4; if (rel->r_type >= SH_COFF_HOWTO_COUNT) howto = NULL; else howto = &sh_coff_howtos[rel->r_type]; if (howto == NULL) { bfd_set_error (bfd_error_bad_value); return FALSE; } #ifdef COFF_WITH_PE if (rel->r_type == R_SH_IMAGEBASE) addend -= pe_data (input_section->output_section->owner)->pe_opthdr.ImageBase; #endif val = 0; if (h == NULL) { asection *sec; /* There is nothing to do for an internal PCDISP reloc. */ if (rel->r_type == R_SH_PCDISP) continue; if (symndx == -1) { sec = bfd_abs_section_ptr; val = 0; } else { sec = sections[symndx]; val = (sec->output_section->vma + sec->output_offset + sym->n_value - sec->vma); } } else { if (h->root.type == bfd_link_hash_defined || h->root.type == bfd_link_hash_defweak) { asection *sec; sec = h->root.u.def.section; val = (h->root.u.def.value + sec->output_section->vma + sec->output_offset); } else if (! info->relocatable) { if (! ((*info->callbacks->undefined_symbol) (info, h->root.root.string, input_bfd, input_section, rel->r_vaddr - input_section->vma, TRUE))) return FALSE; } } rstat = _bfd_final_link_relocate (howto, input_bfd, input_section, contents, rel->r_vaddr - input_section->vma, val, addend); switch (rstat) { default: abort (); case bfd_reloc_ok: break; case bfd_reloc_overflow: { const char *name; char buf[SYMNMLEN + 1]; if (symndx == -1) name = "*ABS*"; else if (h != NULL) name = NULL; else if (sym->_n._n_n._n_zeroes == 0 && sym->_n._n_n._n_offset != 0) name = obj_coff_strings (input_bfd) + sym->_n._n_n._n_offset; else { strncpy (buf, sym->_n._n_name, SYMNMLEN); buf[SYMNMLEN] = '\0'; name = buf; } if (! ((*info->callbacks->reloc_overflow) (info, (h ? &h->root : NULL), name, howto->name, (bfd_vma) 0, input_bfd, input_section, rel->r_vaddr - input_section->vma))) return FALSE; } } } return TRUE; } /* This is a version of bfd_generic_get_relocated_section_contents which uses sh_relocate_section. */ static bfd_byte * sh_coff_get_relocated_section_contents (output_bfd, link_info, link_order, data, relocatable, symbols) bfd *output_bfd; struct bfd_link_info *link_info; struct bfd_link_order *link_order; bfd_byte *data; bfd_boolean relocatable; asymbol **symbols; { asection *input_section = link_order->u.indirect.section; bfd *input_bfd = input_section->owner; asection **sections = NULL; struct internal_reloc *internal_relocs = NULL; struct internal_syment *internal_syms = NULL; /* We only need to handle the case of relaxing, or of having a particular set of section contents, specially. */ if (relocatable || coff_section_data (input_bfd, input_section) == NULL || coff_section_data (input_bfd, input_section)->contents == NULL) return bfd_generic_get_relocated_section_contents (output_bfd, link_info, link_order, data, relocatable, symbols); memcpy (data, coff_section_data (input_bfd, input_section)->contents, (size_t) input_section->size); if ((input_section->flags & SEC_RELOC) != 0 && input_section->reloc_count > 0) { bfd_size_type symesz = bfd_coff_symesz (input_bfd); bfd_byte *esym, *esymend; struct internal_syment *isymp; asection **secpp; bfd_size_type amt; if (! _bfd_coff_get_external_symbols (input_bfd)) goto error_return; internal_relocs = (_bfd_coff_read_internal_relocs (input_bfd, input_section, FALSE, (bfd_byte *) NULL, FALSE, (struct internal_reloc *) NULL)); if (internal_relocs == NULL) goto error_return; amt = obj_raw_syment_count (input_bfd); amt *= sizeof (struct internal_syment); internal_syms = (struct internal_syment *) bfd_malloc (amt); if (internal_syms == NULL) goto error_return; amt = obj_raw_syment_count (input_bfd); amt *= sizeof (asection *); sections = (asection **) bfd_malloc (amt); if (sections == NULL) goto error_return; isymp = internal_syms; secpp = sections; esym = (bfd_byte *) obj_coff_external_syms (input_bfd); esymend = esym + obj_raw_syment_count (input_bfd) * symesz; while (esym < esymend) { bfd_coff_swap_sym_in (input_bfd, (PTR) esym, (PTR) isymp); if (isymp->n_scnum != 0) *secpp = coff_section_from_bfd_index (input_bfd, isymp->n_scnum); else { if (isymp->n_value == 0) *secpp = bfd_und_section_ptr; else *secpp = bfd_com_section_ptr; } esym += (isymp->n_numaux + 1) * symesz; secpp += isymp->n_numaux + 1; isymp += isymp->n_numaux + 1; } if (! sh_relocate_section (output_bfd, link_info, input_bfd, input_section, data, internal_relocs, internal_syms, sections)) goto error_return; free (sections); sections = NULL; free (internal_syms); internal_syms = NULL; free (internal_relocs); internal_relocs = NULL; } return data; error_return: if (internal_relocs != NULL) free (internal_relocs); if (internal_syms != NULL) free (internal_syms); if (sections != NULL) free (sections); return NULL; } /* The target vectors. */ #ifndef TARGET_SHL_SYM CREATE_BIG_COFF_TARGET_VEC (shcoff_vec, "coff-sh", BFD_IS_RELAXABLE, 0, '_', NULL, COFF_SWAP_TABLE) #endif #ifdef TARGET_SHL_SYM #define TARGET_SYM TARGET_SHL_SYM #else #define TARGET_SYM shlcoff_vec #endif #ifndef TARGET_SHL_NAME #define TARGET_SHL_NAME "coff-shl" #endif #ifdef COFF_WITH_PE CREATE_LITTLE_COFF_TARGET_VEC (TARGET_SYM, TARGET_SHL_NAME, BFD_IS_RELAXABLE, SEC_CODE | SEC_DATA, '_', NULL, COFF_SWAP_TABLE); #else CREATE_LITTLE_COFF_TARGET_VEC (TARGET_SYM, TARGET_SHL_NAME, BFD_IS_RELAXABLE, 0, '_', NULL, COFF_SWAP_TABLE) #endif #ifndef TARGET_SHL_SYM static const bfd_target * coff_small_object_p PARAMS ((bfd *)); static bfd_boolean coff_small_new_section_hook PARAMS ((bfd *, asection *)); /* Some people want versions of the SH COFF target which do not align to 16 byte boundaries. We implement that by adding a couple of new target vectors. These are just like the ones above, but they change the default section alignment. To generate them in the assembler, use -small. To use them in the linker, use -b coff-sh{l}-small and -oformat coff-sh{l}-small. Yes, this is a horrible hack. A general solution for setting section alignment in COFF is rather complex. ELF handles this correctly. */ /* Only recognize the small versions if the target was not defaulted. Otherwise we won't recognize the non default endianness. */ static const bfd_target * coff_small_object_p (abfd) bfd *abfd; { if (abfd->target_defaulted) { bfd_set_error (bfd_error_wrong_format); return NULL; } return coff_object_p (abfd); } /* Set the section alignment for the small versions. */ static bfd_boolean coff_small_new_section_hook (abfd, section) bfd *abfd; asection *section; { if (! coff_new_section_hook (abfd, section)) return FALSE; /* We must align to at least a four byte boundary, because longword accesses must be on a four byte boundary. */ if (section->alignment_power == COFF_DEFAULT_SECTION_ALIGNMENT_POWER) section->alignment_power = 2; return TRUE; } /* This is copied from bfd_coff_std_swap_table so that we can change the default section alignment power. */ static const bfd_coff_backend_data bfd_coff_small_swap_table = { coff_swap_aux_in, coff_swap_sym_in, coff_swap_lineno_in, coff_swap_aux_out, coff_swap_sym_out, coff_swap_lineno_out, coff_swap_reloc_out, coff_swap_filehdr_out, coff_swap_aouthdr_out, coff_swap_scnhdr_out, FILHSZ, AOUTSZ, SCNHSZ, SYMESZ, AUXESZ, RELSZ, LINESZ, FILNMLEN, #ifdef COFF_LONG_FILENAMES TRUE, #else FALSE, #endif #ifdef COFF_LONG_SECTION_NAMES TRUE, #else FALSE, #endif 2, #ifdef COFF_FORCE_SYMBOLS_IN_STRINGS TRUE, #else FALSE, #endif #ifdef COFF_DEBUG_STRING_WIDE_PREFIX 4, #else 2, #endif coff_swap_filehdr_in, coff_swap_aouthdr_in, coff_swap_scnhdr_in, coff_swap_reloc_in, coff_bad_format_hook, coff_set_arch_mach_hook, coff_mkobject_hook, styp_to_sec_flags, coff_set_alignment_hook, coff_slurp_symbol_table, symname_in_debug_hook, coff_pointerize_aux_hook, coff_print_aux, coff_reloc16_extra_cases, coff_reloc16_estimate, coff_classify_symbol, coff_compute_section_file_positions, coff_start_final_link, coff_relocate_section, coff_rtype_to_howto, coff_adjust_symndx, coff_link_add_one_symbol, coff_link_output_has_begun, coff_final_link_postscript }; #define coff_small_close_and_cleanup \ coff_close_and_cleanup #define coff_small_bfd_free_cached_info \ coff_bfd_free_cached_info #define coff_small_get_section_contents \ coff_get_section_contents #define coff_small_get_section_contents_in_window \ coff_get_section_contents_in_window extern const bfd_target shlcoff_small_vec; const bfd_target shcoff_small_vec = { "coff-sh-small", /* name */ bfd_target_coff_flavour, BFD_ENDIAN_BIG, /* data byte order is big */ BFD_ENDIAN_BIG, /* header byte order is big */ (HAS_RELOC | EXEC_P | /* object flags */ HAS_LINENO | HAS_DEBUG | HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE), (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), '_', /* leading symbol underscore */ '/', /* ar_pad_char */ 15, /* ar_max_namelen */ bfd_getb64, bfd_getb_signed_64, bfd_putb64, bfd_getb32, bfd_getb_signed_32, bfd_putb32, bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */ bfd_getb64, bfd_getb_signed_64, bfd_putb64, bfd_getb32, bfd_getb_signed_32, bfd_putb32, bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */ {_bfd_dummy_target, coff_small_object_p, /* bfd_check_format */ bfd_generic_archive_p, _bfd_dummy_target}, {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */ bfd_false}, {bfd_false, coff_write_object_contents, /* bfd_write_contents */ _bfd_write_archive_contents, bfd_false}, BFD_JUMP_TABLE_GENERIC (coff_small), BFD_JUMP_TABLE_COPY (coff), BFD_JUMP_TABLE_CORE (_bfd_nocore), BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff), BFD_JUMP_TABLE_SYMBOLS (coff), BFD_JUMP_TABLE_RELOCS (coff), BFD_JUMP_TABLE_WRITE (coff), BFD_JUMP_TABLE_LINK (coff), BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic), & shlcoff_small_vec, (PTR) &bfd_coff_small_swap_table }; const bfd_target shlcoff_small_vec = { "coff-shl-small", /* name */ bfd_target_coff_flavour, BFD_ENDIAN_LITTLE, /* data byte order is little */ BFD_ENDIAN_LITTLE, /* header byte order is little endian too*/ (HAS_RELOC | EXEC_P | /* object flags */ HAS_LINENO | HAS_DEBUG | HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE), (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), '_', /* leading symbol underscore */ '/', /* ar_pad_char */ 15, /* ar_max_namelen */ bfd_getl64, bfd_getl_signed_64, bfd_putl64, bfd_getl32, bfd_getl_signed_32, bfd_putl32, bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */ bfd_getl64, bfd_getl_signed_64, bfd_putl64, bfd_getl32, bfd_getl_signed_32, bfd_putl32, bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */ {_bfd_dummy_target, coff_small_object_p, /* bfd_check_format */ bfd_generic_archive_p, _bfd_dummy_target}, {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */ bfd_false}, {bfd_false, coff_write_object_contents, /* bfd_write_contents */ _bfd_write_archive_contents, bfd_false}, BFD_JUMP_TABLE_GENERIC (coff_small), BFD_JUMP_TABLE_COPY (coff), BFD_JUMP_TABLE_CORE (_bfd_nocore), BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff), BFD_JUMP_TABLE_SYMBOLS (coff), BFD_JUMP_TABLE_RELOCS (coff), BFD_JUMP_TABLE_WRITE (coff), BFD_JUMP_TABLE_LINK (coff), BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic), & shcoff_small_vec, (PTR) &bfd_coff_small_swap_table }; #endif
Go to most recent revision | Compare with Previous | Blame | View Log