URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.18.50/] [gas/] [config/] [tc-mcore.c] - Rev 332
Go to most recent revision | Compare with Previous | Blame | View Log
/* tc-mcore.c -- Assemble code for M*Core Copyright 1999, 2000, 2001, 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GAS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GAS; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #include "as.h" #include "subsegs.h" #define DEFINE_TABLE #include "../opcodes/mcore-opc.h" #include "safe-ctype.h" #ifdef OBJ_ELF #include "elf/mcore.h" #endif #ifndef streq #define streq(a,b) (strcmp (a, b) == 0) #endif /* Forward declarations for dumb compilers. */ /* Several places in this file insert raw instructions into the object. They should use MCORE_INST_XXX macros to get the opcodes and then use these two macros to crack the MCORE_INST value into the appropriate byte values. */ #define INST_BYTE0(x) (target_big_endian ? (((x) >> 8) & 0xFF) : ((x) & 0xFF)) #define INST_BYTE1(x) (target_big_endian ? ((x) & 0xFF) : (((x) >> 8) & 0xFF)) const char comment_chars[] = "#/"; const char line_separator_chars[] = ";"; const char line_comment_chars[] = "#/"; static int do_jsri2bsr = 0; /* Change here from 1 by Cruess 19 August 97. */ static int sifilter_mode = 0; const char EXP_CHARS[] = "eE"; /* Chars that mean this number is a floating point constant As in 0f12.456 or 0d1.2345e12 */ const char FLT_CHARS[] = "rRsSfFdDxXpP"; #define C(what,length) (((what) << 2) + (length)) #define GET_WHAT(x) ((x >> 2)) /* These are the two types of relaxable instruction. */ #define COND_JUMP 1 #define UNCD_JUMP 2 #define UNDEF_DISP 0 #define DISP12 1 #define DISP32 2 #define UNDEF_WORD_DISP 3 #define C12_LEN 2 #define C32_LEN 10 /* Allow for align. */ #define U12_LEN 2 #define U32_LEN 8 /* Allow for align. */ typedef enum { M210, M340 } cpu_type; cpu_type cpu = M340; /* Initialize the relax table. */ const relax_typeS md_relax_table[] = { { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, { 0, 0, 0, 0 }, /* COND_JUMP */ { 0, 0, 0, 0 }, /* UNDEF_DISP */ { 2048, -2046, C12_LEN, C(COND_JUMP, DISP32) }, /* DISP12 */ { 0, 0, C32_LEN, 0 }, /* DISP32 */ { 0, 0, C32_LEN, 0 }, /* UNDEF_WORD_DISP */ /* UNCD_JUMP */ { 0, 0, 0, 0 }, /* UNDEF_DISP */ { 2048, -2046, U12_LEN, C(UNCD_JUMP, DISP32) }, /* DISP12 */ { 0, 0, U32_LEN, 0 }, /* DISP32 */ { 0, 0, U32_LEN, 0 } /* UNDEF_WORD_DISP */ }; /* Literal pool data structures. */ struct literal { unsigned short refcnt; unsigned char ispcrel; unsigned char unused; expressionS e; }; #define MAX_POOL_SIZE (1024/4) static struct literal litpool [MAX_POOL_SIZE]; static unsigned poolsize; static unsigned poolnumber; static unsigned long poolspan; /* SPANPANIC: the point at which we get too scared and force a dump of the literal pool, and perhaps put a branch in place. Calculated as: 1024 span of lrw/jmpi/jsri insn (actually span+1) -2 possible alignment at the insn. -2 possible alignment to get the table aligned. -2 an inserted branch around the table. == 1018 at 1018, we might be in trouble. -- so we have to be smaller than 1018 and since we deal with 2-byte instructions, the next good choice is 1016. -- Note we have a test case that fails when we've got 1018 here. */ #define SPANPANIC (1016) /* 1024 - 1 entry - 2 byte rounding. */ #define SPANCLOSE (900) #define SPANEXIT (600) static symbolS * poolsym; /* Label for current pool. */ static char poolname[8]; static struct hash_control * opcode_hash_control; /* Opcode mnemonics. */ #define POOL_END_LABEL ".LE" #define POOL_START_LABEL ".LS" static void make_name (char * s, char * p, int n) { static const char hex[] = "0123456789ABCDEF"; s[0] = p[0]; s[1] = p[1]; s[2] = p[2]; s[3] = hex[(n >> 12) & 0xF]; s[4] = hex[(n >> 8) & 0xF]; s[5] = hex[(n >> 4) & 0xF]; s[6] = hex[(n) & 0xF]; s[7] = 0; } static void dump_literals (int isforce) { unsigned int i; struct literal * p; symbolS * brarsym = NULL; if (poolsize == 0) return; /* Must we branch around the literal table? */ if (isforce) { char * output; char brarname[8]; make_name (brarname, POOL_END_LABEL, poolnumber); brarsym = symbol_make (brarname); symbol_table_insert (brarsym); output = frag_var (rs_machine_dependent, md_relax_table[C (UNCD_JUMP, DISP32)].rlx_length, md_relax_table[C (UNCD_JUMP, DISP12)].rlx_length, C (UNCD_JUMP, 0), brarsym, 0, 0); output[0] = INST_BYTE0 (MCORE_INST_BR); /* br .+xxx */ output[1] = INST_BYTE1 (MCORE_INST_BR); } /* Make sure that the section is sufficiently aligned and that the literal table is aligned within it. */ record_alignment (now_seg, 2); frag_align (2, 0, 0); colon (S_GET_NAME (poolsym)); for (i = 0, p = litpool; i < poolsize; i++, p++) emit_expr (& p->e, 4); if (brarsym != NULL) colon (S_GET_NAME (brarsym)); poolsize = 0; } static void mcore_s_literals (int ignore ATTRIBUTE_UNUSED) { dump_literals (0); demand_empty_rest_of_line (); } /* Perform FUNC (ARG), and track number of bytes added to frag. */ static void mcore_pool_count (void (*func) (int), int arg) { const fragS *curr_frag = frag_now; offsetT added = -frag_now_fix_octets (); (*func) (arg); while (curr_frag != frag_now) { added += curr_frag->fr_fix; curr_frag = curr_frag->fr_next; } added += frag_now_fix_octets (); poolspan += added; } static void check_literals (int kind, int offset) { poolspan += offset; /* SPANCLOSE and SPANEXIT are smaller numbers than SPANPANIC. SPANPANIC means that we must dump now. kind == 0 is any old instruction. kind > 0 means we just had a control transfer instruction. kind == 1 means within a function kind == 2 means we just left a function The dump_literals (1) call inserts a branch around the table, so we first look to see if its a situation where we won't have to insert a branch (e.g., the previous instruction was an unconditional branch). SPANPANIC is the point where we must dump a single-entry pool. it accounts for alignments and an inserted branch. the 'poolsize*2' accounts for the scenario where we do: lrw r1,lit1; lrw r2,lit2; lrw r3,lit3 Note that the 'lit2' reference is 2 bytes further along but the literal it references will be 4 bytes further along, so we must consider the poolsize into this equation. This is slightly over-cautious, but guarantees that we won't panic because a relocation is too distant. */ if (poolspan > SPANCLOSE && kind > 0) dump_literals (0); else if (poolspan > SPANEXIT && kind > 1) dump_literals (0); else if (poolspan >= (SPANPANIC - poolsize * 2)) dump_literals (1); } static void mcore_cons (int nbytes) { if (now_seg == text_section) mcore_pool_count (cons, nbytes); else cons (nbytes); /* In theory we ought to call check_literals (2,0) here in case we need to dump the literal table. We cannot do this however, as the directives that we are intercepting may be being used to build a switch table, and we must not interfere with its contents. Instead we cross our fingers and pray... */ } static void mcore_float_cons (int float_type) { if (now_seg == text_section) mcore_pool_count (float_cons, float_type); else float_cons (float_type); /* See the comment in mcore_cons () about calling check_literals. It is unlikely that a switch table will be constructed using floating point values, but it is still likely that an indexed table of floating point constants is being created by these directives, so again we must not interfere with their placement. */ } static void mcore_stringer (int append_zero) { if (now_seg == text_section) mcore_pool_count (stringer, append_zero); else stringer (append_zero); /* We call check_literals here in case a large number of strings are being placed into the text section with a sequence of stringer directives. In theory we could be upsetting something if these strings are actually in an indexed table instead of referenced by individual labels. Let us hope that that never happens. */ check_literals (2, 0); } static void mcore_fill (int unused) { if (now_seg == text_section) mcore_pool_count (s_fill, unused); else s_fill (unused); check_literals (2, 0); } /* Handle the section changing pseudo-ops. These call through to the normal implementations, but they dump the literal pool first. */ static void mcore_s_text (int ignore) { dump_literals (0); #ifdef OBJ_ELF obj_elf_text (ignore); #else s_text (ignore); #endif } static void mcore_s_data (int ignore) { dump_literals (0); #ifdef OBJ_ELF obj_elf_data (ignore); #else s_data (ignore); #endif } static void mcore_s_section (int ignore) { /* Scan forwards to find the name of the section. If the section being switched to is ".line" then this is a DWARF1 debug section which is arbitrarily placed inside generated code. In this case do not dump the literal pool because it is a) inefficient and b) would require the generation of extra code to jump around the pool. */ char * ilp = input_line_pointer; while (*ilp != 0 && ISSPACE (*ilp)) ++ ilp; if (strncmp (ilp, ".line", 5) == 0 && (ISSPACE (ilp[5]) || *ilp == '\n' || *ilp == '\r')) ; else dump_literals (0); #ifdef OBJ_ELF obj_elf_section (ignore); #endif #ifdef OBJ_COFF obj_coff_section (ignore); #endif } static void mcore_s_bss (int needs_align) { dump_literals (0); s_lcomm_bytes (needs_align); } #ifdef OBJ_ELF static void mcore_s_comm (int needs_align) { dump_literals (0); obj_elf_common (needs_align); } #endif /* This table describes all the machine specific pseudo-ops the assembler has to support. The fields are: Pseudo-op name without dot Function to call to execute this pseudo-op Integer arg to pass to the function. */ const pseudo_typeS md_pseudo_table[] = { { "export", s_globl, 0 }, { "import", s_ignore, 0 }, { "literals", mcore_s_literals, 0 }, { "page", listing_eject, 0 }, /* The following are to intercept the placement of data into the text section (eg addresses for a switch table), so that the space they occupy can be taken into account when deciding whether or not to dump the current literal pool. XXX - currently we do not cope with the .space and .dcb.d directives. */ { "ascii", mcore_stringer, 8 + 0 }, { "asciz", mcore_stringer, 8 + 1 }, { "byte", mcore_cons, 1 }, { "dc", mcore_cons, 2 }, { "dc.b", mcore_cons, 1 }, { "dc.d", mcore_float_cons, 'd'}, { "dc.l", mcore_cons, 4 }, { "dc.s", mcore_float_cons, 'f'}, { "dc.w", mcore_cons, 2 }, { "dc.x", mcore_float_cons, 'x'}, { "double", mcore_float_cons, 'd'}, { "float", mcore_float_cons, 'f'}, { "hword", mcore_cons, 2 }, { "int", mcore_cons, 4 }, { "long", mcore_cons, 4 }, { "octa", mcore_cons, 16 }, { "quad", mcore_cons, 8 }, { "short", mcore_cons, 2 }, { "single", mcore_float_cons, 'f'}, { "string", mcore_stringer, 8 + 1 }, { "word", mcore_cons, 2 }, { "fill", mcore_fill, 0 }, /* Allow for the effect of section changes. */ { "text", mcore_s_text, 0 }, { "data", mcore_s_data, 0 }, { "bss", mcore_s_bss, 1 }, #ifdef OBJ_ELF { "comm", mcore_s_comm, 0 }, #endif { "section", mcore_s_section, 0 }, { "section.s", mcore_s_section, 0 }, { "sect", mcore_s_section, 0 }, { "sect.s", mcore_s_section, 0 }, { 0, 0, 0 } }; /* This function is called once, at assembler startup time. This should set up all the tables, etc that the MD part of the assembler needs. */ void md_begin (void) { const mcore_opcode_info * opcode; char * prev_name = ""; opcode_hash_control = hash_new (); /* Insert unique names into hash table. */ for (opcode = mcore_table; opcode->name; opcode ++) { if (! streq (prev_name, opcode->name)) { prev_name = opcode->name; hash_insert (opcode_hash_control, opcode->name, (char *) opcode); } } } /* Get a log2(val). */ static int mylog2 (unsigned int val) { int log = -1; while (val != 0) { log ++; val >>= 1; } return log; } /* Try to parse a reg name. */ static char * parse_reg (char * s, unsigned * reg) { /* Strip leading whitespace. */ while (ISSPACE (* s)) ++ s; if (TOLOWER (s[0]) == 'r') { if (s[1] == '1' && s[2] >= '0' && s[2] <= '5') { *reg = 10 + s[2] - '0'; return s + 3; } if (s[1] >= '0' && s[1] <= '9') { *reg = s[1] - '0'; return s + 2; } } else if ( TOLOWER (s[0]) == 's' && TOLOWER (s[1]) == 'p' && ! ISALNUM (s[2])) { * reg = 0; return s + 2; } as_bad (_("register expected, but saw '%.6s'"), s); return s; } static struct Cregs { char * name; unsigned int crnum; } cregs[] = { { "psr", 0}, { "vbr", 1}, { "epsr", 2}, { "fpsr", 3}, { "epc", 4}, { "fpc", 5}, { "ss0", 6}, { "ss1", 7}, { "ss2", 8}, { "ss3", 9}, { "ss4", 10}, { "gcr", 11}, { "gsr", 12}, { "", 0} }; static char * parse_creg (char * s, unsigned * reg) { int i; /* Strip leading whitespace. */ while (ISSPACE (* s)) ++s; if ((TOLOWER (s[0]) == 'c' && TOLOWER (s[1]) == 'r')) { if (s[2] == '3' && s[3] >= '0' && s[3] <= '1') { *reg = 30 + s[3] - '0'; return s + 4; } if (s[2] == '2' && s[3] >= '0' && s[3] <= '9') { *reg = 20 + s[3] - '0'; return s + 4; } if (s[2] == '1' && s[3] >= '0' && s[3] <= '9') { *reg = 10 + s[3] - '0'; return s + 4; } if (s[2] >= '0' && s[2] <= '9') { *reg = s[2] - '0'; return s + 3; } } /* Look at alternate creg names before giving error. */ for (i = 0; cregs[i].name[0] != '\0'; i++) { char buf [10]; int length; int j; length = strlen (cregs[i].name); for (j = 0; j < length; j++) buf[j] = TOLOWER (s[j]); if (strncmp (cregs[i].name, buf, length) == 0) { *reg = cregs[i].crnum; return s + length; } } as_bad (_("control register expected, but saw '%.6s'"), s); return s; } static char * parse_psrmod (char * s, unsigned * reg) { int i; char buf[10]; static struct psrmods { char * name; unsigned int value; } psrmods[] = { { "ie", 1 }, { "fe", 2 }, { "ee", 4 }, { "af", 8 } /* Really 0 and non-combinable. */ }; for (i = 0; i < 2; i++) buf[i] = TOLOWER (s[i]); for (i = sizeof (psrmods) / sizeof (psrmods[0]); i--;) { if (! strncmp (psrmods[i].name, buf, 2)) { * reg = psrmods[i].value; return s + 2; } } as_bad (_("bad/missing psr specifier")); * reg = 0; return s; } static char * parse_exp (char * s, expressionS * e) { char * save; char * new; /* Skip whitespace. */ while (ISSPACE (* s)) ++ s; save = input_line_pointer; input_line_pointer = s; expression (e); if (e->X_op == O_absent) as_bad (_("missing operand")); new = input_line_pointer; input_line_pointer = save; return new; } static int enter_literal (expressionS * e, int ispcrel) { unsigned int i; struct literal * p; if (poolsize >= MAX_POOL_SIZE - 2) /* The literal pool is as full as we can handle. We have to be 2 entries shy of the 1024/4=256 entries because we have to allow for the branch (2 bytes) and the alignment (2 bytes before the first insn referencing the pool and 2 bytes before the pool itself) == 6 bytes, rounds up to 2 entries. */ dump_literals (1); if (poolsize == 0) { /* Create new literal pool. */ if (++ poolnumber > 0xFFFF) as_fatal (_("more than 65K literal pools")); make_name (poolname, POOL_START_LABEL, poolnumber); poolsym = symbol_make (poolname); symbol_table_insert (poolsym); poolspan = 0; } /* Search pool for value so we don't have duplicates. */ for (p = litpool, i = 0; i < poolsize; i++, p++) { if (e->X_op == p->e.X_op && e->X_add_symbol == p->e.X_add_symbol && e->X_add_number == p->e.X_add_number && ispcrel == p->ispcrel) { p->refcnt ++; return i; } } p->refcnt = 1; p->ispcrel = ispcrel; p->e = * e; poolsize ++; return i; } /* Parse a literal specification. -- either new or old syntax. old syntax: the user supplies the label and places the literal. new syntax: we put it into the literal pool. */ static char * parse_rt (char * s, char ** outputp, int ispcrel, expressionS * ep) { expressionS e; int n; if (ep) /* Indicate nothing there. */ ep->X_op = O_absent; if (*s == '[') { s = parse_exp (s + 1, & e); if (*s == ']') s++; else as_bad (_("missing ']'")); } else { s = parse_exp (s, & e); n = enter_literal (& e, ispcrel); if (ep) *ep = e; /* Create a reference to pool entry. */ e.X_op = O_symbol; e.X_add_symbol = poolsym; e.X_add_number = n << 2; } * outputp = frag_more (2); fix_new_exp (frag_now, (*outputp) - frag_now->fr_literal, 2, & e, 1, BFD_RELOC_MCORE_PCREL_IMM8BY4); return s; } static char * parse_imm (char * s, unsigned * val, unsigned min, unsigned max) { char * new; expressionS e; new = parse_exp (s, & e); if (e.X_op == O_absent) ; /* An error message has already been emitted. */ else if (e.X_op != O_constant) as_bad (_("operand must be a constant")); else if ((addressT) e.X_add_number < min || (addressT) e.X_add_number > max) as_bad (_("operand must be absolute in range %u..%u, not %ld"), min, max, (long) e.X_add_number); * val = e.X_add_number; return new; } static char * parse_mem (char * s, unsigned * reg, unsigned * off, unsigned siz) { * off = 0; while (ISSPACE (* s)) ++ s; if (* s == '(') { s = parse_reg (s + 1, reg); while (ISSPACE (* s)) ++ s; if (* s == ',') { s = parse_imm (s + 1, off, 0, 63); if (siz > 1) { if (siz > 2) { if (* off & 0x3) as_bad (_("operand must be a multiple of 4")); * off >>= 2; } else { if (* off & 0x1) as_bad (_("operand must be a multiple of 2")); * off >>= 1; } } } while (ISSPACE (* s)) ++ s; if (* s == ')') s ++; } else as_bad (_("base register expected")); return s; } /* This is the guts of the machine-dependent assembler. STR points to a machine dependent instruction. This function is supposed to emit the frags/bytes it assembles to. */ void md_assemble (char * str) { char * op_start; char * op_end; mcore_opcode_info * opcode; char * output; int nlen = 0; unsigned short inst; unsigned reg; unsigned off; unsigned isize; expressionS e; char name[20]; /* Drop leading whitespace. */ while (ISSPACE (* str)) str ++; /* Find the op code end. */ for (op_start = op_end = str; nlen < 20 && !is_end_of_line [(unsigned char) *op_end] && *op_end != ' '; op_end++) { name[nlen] = op_start[nlen]; nlen++; } name [nlen] = 0; if (nlen == 0) { as_bad (_("can't find opcode ")); return; } opcode = (mcore_opcode_info *) hash_find (opcode_hash_control, name); if (opcode == NULL) { as_bad (_("unknown opcode \"%s\""), name); return; } inst = opcode->inst; isize = 2; switch (opcode->opclass) { case O0: output = frag_more (2); break; case OT: op_end = parse_imm (op_end + 1, & reg, 0, 3); inst |= reg; output = frag_more (2); break; case O1: op_end = parse_reg (op_end + 1, & reg); inst |= reg; output = frag_more (2); break; case JMP: op_end = parse_reg (op_end + 1, & reg); inst |= reg; output = frag_more (2); /* In a sifilter mode, we emit this insn 2 times, fixes problem of an interrupt during a jmp.. */ if (sifilter_mode) { output[0] = INST_BYTE0 (inst); output[1] = INST_BYTE1 (inst); output = frag_more (2); } break; case JSR: op_end = parse_reg (op_end + 1, & reg); if (reg == 15) as_bad (_("invalid register: r15 illegal")); inst |= reg; output = frag_more (2); if (sifilter_mode) { /* Replace with: bsr .+2 ; addi r15,6; jmp rx ; jmp rx. */ inst = MCORE_INST_BSR; /* With 0 displacement. */ output[0] = INST_BYTE0 (inst); output[1] = INST_BYTE1 (inst); output = frag_more (2); inst = MCORE_INST_ADDI; inst |= 15; /* addi r15,6 */ inst |= (6 - 1) << 4; /* Over the jmp's. */ output[0] = INST_BYTE0 (inst); output[1] = INST_BYTE1 (inst); output = frag_more (2); inst = MCORE_INST_JMP | reg; output[0] = INST_BYTE0 (inst); output[1] = INST_BYTE1 (inst); /* 2nd emitted in fallthrough. */ output = frag_more (2); } break; case OC: op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (*op_end == ',') { op_end = parse_creg (op_end + 1, & reg); inst |= reg << 4; } output = frag_more (2); break; case MULSH: if (cpu == M210) { as_bad (_("M340 specific opcode used when assembling for M210")); break; } /* drop through... */ case O2: op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_reg (op_end + 1, & reg); inst |= reg << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case X1: /* Handle both syntax-> xtrb- r1,rx OR xtrb- rx. */ op_end = parse_reg (op_end + 1, & reg); /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') /* xtrb- r1,rx. */ { if (reg != 1) as_bad (_("destination register must be r1")); op_end = parse_reg (op_end + 1, & reg); } inst |= reg; output = frag_more (2); break; case O1R1: /* div- rx,r1. */ op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_reg (op_end + 1, & reg); if (reg != 1) as_bad (_("source register must be r1")); } else as_bad (_("second operand missing")); output = frag_more (2); break; case OI: op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 1, 32); inst |= (reg - 1) << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case OB: op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 0, 31); inst |= reg << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case OB2: /* Like OB, but arg is 2^n instead of n. */ op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 1, 1 << 31); /* Further restrict the immediate to a power of two. */ if ((reg & (reg - 1)) == 0) reg = mylog2 (reg); else { reg = 0; as_bad (_("immediate is not a power of two")); } inst |= (reg) << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case OBRa: /* Specific for bgeni: imm of 0->6 translate to movi. */ case OBRb: case OBRc: op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 0, 31); /* Immediate values of 0 -> 6 translate to movi. */ if (reg <= 6) { inst = (inst & 0xF) | MCORE_INST_BGENI_ALT; reg = 0x1 << reg; as_warn (_("translating bgeni to movi")); } inst &= ~ 0x01f0; inst |= reg << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case OBR2: /* Like OBR, but arg is 2^n instead of n. */ op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 1, 1 << 31); /* Further restrict the immediate to a power of two. */ if ((reg & (reg - 1)) == 0) reg = mylog2 (reg); else { reg = 0; as_bad (_("immediate is not a power of two")); } /* Immediate values of 0 -> 6 translate to movi. */ if (reg <= 6) { inst = (inst & 0xF) | MCORE_INST_BGENI_ALT; reg = 0x1 << reg; as_warn (_("translating mgeni to movi")); } inst |= reg << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case OMa: /* Specific for bmaski: imm 1->7 translate to movi. */ case OMb: case OMc: op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 1, 32); /* Immediate values of 1 -> 7 translate to movi. */ if (reg <= 7) { inst = (inst & 0xF) | MCORE_INST_BMASKI_ALT; reg = (0x1 << reg) - 1; inst |= reg << 4; as_warn (_("translating bmaski to movi")); } else { inst &= ~ 0x01F0; inst |= (reg & 0x1F) << 4; } } else as_bad (_("second operand missing")); output = frag_more (2); break; case SI: op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 1, 31); inst |= reg << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case I7: op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 0, 0x7F); inst |= reg << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case LS: op_end = parse_reg (op_end + 1, & reg); inst |= reg << 8; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { int size; if ((inst & 0x6000) == 0) size = 4; else if ((inst & 0x6000) == 0x4000) size = 2; else if ((inst & 0x6000) == 0x2000) size = 1; else abort (); op_end = parse_mem (op_end + 1, & reg, & off, size); if (off > 16) as_bad (_("displacement too large (%d)"), off); else inst |= (reg) | (off << 4); } else as_bad (_("second operand missing")); output = frag_more (2); break; case LR: op_end = parse_reg (op_end + 1, & reg); if (reg == 0 || reg == 15) as_bad (_("Invalid register: r0 and r15 illegal")); inst |= (reg << 8); /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { /* parse_rt calls frag_more() for us. */ input_line_pointer = parse_rt (op_end + 1, & output, 0, 0); op_end = input_line_pointer; } else { as_bad (_("second operand missing")); output = frag_more (2); /* save its space */ } break; case LJ: input_line_pointer = parse_rt (op_end + 1, & output, 1, 0); /* parse_rt() calls frag_more() for us. */ op_end = input_line_pointer; break; case RM: op_end = parse_reg (op_end + 1, & reg); if (reg == 0 || reg == 15) as_bad (_("bad starting register: r0 and r15 invalid")); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == '-') { op_end = parse_reg (op_end + 1, & reg); if (reg != 15) as_bad (_("ending register must be r15")); /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; } if (* op_end == ',') { op_end ++; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == '(') { op_end = parse_reg (op_end + 1, & reg); if (reg != 0) as_bad (_("bad base register: must be r0")); if (* op_end == ')') op_end ++; } else as_bad (_("base register expected")); } else as_bad (_("second operand missing")); output = frag_more (2); break; case RQ: op_end = parse_reg (op_end + 1, & reg); if (reg != 4) as_fatal (_("first register must be r4")); /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == '-') { op_end = parse_reg (op_end + 1, & reg); if (reg != 7) as_fatal (_("last register must be r7")); /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end ++; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == '(') { op_end = parse_reg (op_end + 1, & reg); if (reg >= 4 && reg <= 7) as_fatal ("base register cannot be r4, r5, r6, or r7"); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ')') op_end ++; } else as_bad (_("base register expected")); } else as_bad (_("second operand missing")); } else as_bad (_("reg-reg expected")); output = frag_more (2); break; case BR: input_line_pointer = parse_exp (op_end + 1, & e); op_end = input_line_pointer; output = frag_more (2); fix_new_exp (frag_now, output-frag_now->fr_literal, 2, & e, 1, BFD_RELOC_MCORE_PCREL_IMM11BY2); break; case BL: op_end = parse_reg (op_end + 1, & reg); inst |= reg << 4; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_exp (op_end + 1, & e); output = frag_more (2); fix_new_exp (frag_now, output-frag_now->fr_literal, 2, & e, 1, BFD_RELOC_MCORE_PCREL_IMM4BY2); } else { as_bad (_("second operand missing")); output = frag_more (2); } break; case JC: input_line_pointer = parse_exp (op_end + 1, & e); op_end = input_line_pointer; output = frag_var (rs_machine_dependent, md_relax_table[C (COND_JUMP, DISP32)].rlx_length, md_relax_table[C (COND_JUMP, DISP12)].rlx_length, C (COND_JUMP, 0), e.X_add_symbol, e.X_add_number, 0); isize = C32_LEN; break; case JU: input_line_pointer = parse_exp (op_end + 1, & e); op_end = input_line_pointer; output = frag_var (rs_machine_dependent, md_relax_table[C (UNCD_JUMP, DISP32)].rlx_length, md_relax_table[C (UNCD_JUMP, DISP12)].rlx_length, C (UNCD_JUMP, 0), e.X_add_symbol, e.X_add_number, 0); isize = U32_LEN; break; case JL: inst = MCORE_INST_JSRI; /* jsri */ input_line_pointer = parse_rt (op_end + 1, & output, 1, & e); /* parse_rt() calls frag_more for us. */ op_end = input_line_pointer; /* Only do this if we know how to do it ... */ if (e.X_op != O_absent && do_jsri2bsr) { /* Look at adding the R_PCREL_JSRIMM11BY2. */ fix_new_exp (frag_now, output-frag_now->fr_literal, 2, & e, 1, BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2); } break; case RSI: /* SI, but imm becomes 32-imm. */ op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 1, 31); reg = 32 - reg; inst |= reg << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case DO21: /* O2, dup rd, lit must be 1 */ op_end = parse_reg (op_end + 1, & reg); inst |= reg; inst |= reg << 4; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 1, 31); if (reg != 1) as_bad (_("second operand must be 1")); } else as_bad (_("second operand missing")); output = frag_more (2); break; case SIa: op_end = parse_reg (op_end + 1, & reg); inst |= reg; /* Skip whitespace. */ while (ISSPACE (* op_end)) ++ op_end; if (* op_end == ',') { op_end = parse_imm (op_end + 1, & reg, 1, 31); if (reg == 0) as_bad (_("zero used as immediate value")); inst |= reg << 4; } else as_bad (_("second operand missing")); output = frag_more (2); break; case OPSR: if (cpu == M210) { as_bad (_("M340 specific opcode used when assembling for M210")); break; } op_end = parse_psrmod (op_end + 1, & reg); /* Look for further selectors. */ while (* op_end == ',') { unsigned value; op_end = parse_psrmod (op_end + 1, & value); if (value & reg) as_bad (_("duplicated psr bit specifier")); reg |= value; } if (reg > 8) as_bad (_("`af' must appear alone")); inst |= (reg & 0x7); output = frag_more (2); break; default: as_bad (_("unimplemented opcode \"%s\""), name); } /* Drop whitespace after all the operands have been parsed. */ while (ISSPACE (* op_end)) op_end ++; /* Give warning message if the insn has more operands than required. */ if (strcmp (op_end, opcode->name) && strcmp (op_end, "")) as_warn (_("ignoring operands: %s "), op_end); output[0] = INST_BYTE0 (inst); output[1] = INST_BYTE1 (inst); check_literals (opcode->transfer, isize); } symbolS * md_undefined_symbol (char *name ATTRIBUTE_UNUSED) { return 0; } void md_mcore_end (void) { dump_literals (0); subseg_set (text_section, 0); } /* Various routines to kill one day. */ char * md_atof (int type, char * litP, int * sizeP) { return ieee_md_atof (type, litP, sizeP, target_big_endian); } const char * md_shortopts = ""; enum options { OPTION_JSRI2BSR_ON = OPTION_MD_BASE, OPTION_JSRI2BSR_OFF, OPTION_SIFILTER_ON, OPTION_SIFILTER_OFF, OPTION_CPU, OPTION_EB, OPTION_EL, }; struct option md_longopts[] = { { "no-jsri2bsr", no_argument, NULL, OPTION_JSRI2BSR_OFF}, { "jsri2bsr", no_argument, NULL, OPTION_JSRI2BSR_ON}, { "sifilter", no_argument, NULL, OPTION_SIFILTER_ON}, { "no-sifilter", no_argument, NULL, OPTION_SIFILTER_OFF}, { "cpu", required_argument, NULL, OPTION_CPU}, { "EB", no_argument, NULL, OPTION_EB}, { "EL", no_argument, NULL, OPTION_EL}, { NULL, no_argument, NULL, 0} }; size_t md_longopts_size = sizeof (md_longopts); int md_parse_option (int c, char * arg) { switch (c) { case OPTION_CPU: if (streq (arg, "210")) { cpu = M210; target_big_endian = 1; } else if (streq (arg, "340")) cpu = M340; else as_warn (_("unrecognised cpu type '%s'"), arg); break; case OPTION_EB: target_big_endian = 1; break; case OPTION_EL: target_big_endian = 0; cpu = M340; break; case OPTION_JSRI2BSR_ON: do_jsri2bsr = 1; break; case OPTION_JSRI2BSR_OFF: do_jsri2bsr = 0; break; case OPTION_SIFILTER_ON: sifilter_mode = 1; break; case OPTION_SIFILTER_OFF: sifilter_mode = 0; break; default: return 0; } return 1; } void md_show_usage (FILE * stream) { fprintf (stream, _("\ MCORE specific options:\n\ -{no-}jsri2bsr {dis}able jsri to bsr transformation (def: dis)\n\ -{no-}sifilter {dis}able silicon filter behavior (def: dis)\n\ -cpu=[210|340] select CPU type\n\ -EB assemble for a big endian system (default)\n\ -EL assemble for a little endian system\n")); } int md_short_jump_size; void md_create_short_jump (char * ptr ATTRIBUTE_UNUSED, addressT from_Nddr ATTRIBUTE_UNUSED, addressT to_Nddr ATTRIBUTE_UNUSED, fragS * frag ATTRIBUTE_UNUSED, symbolS * to_symbol ATTRIBUTE_UNUSED) { as_fatal (_("failed sanity check: short_jump")); } void md_create_long_jump (char * ptr ATTRIBUTE_UNUSED, addressT from_Nddr ATTRIBUTE_UNUSED, addressT to_Nddr ATTRIBUTE_UNUSED, fragS * frag ATTRIBUTE_UNUSED, symbolS * to_symbol ATTRIBUTE_UNUSED) { as_fatal (_("failed sanity check: long_jump")); } /* Called after relaxing, change the frags so they know how big they are. */ void md_convert_frag (bfd * abfd ATTRIBUTE_UNUSED, segT sec ATTRIBUTE_UNUSED, fragS * fragP) { char *buffer; int targ_addr = S_GET_VALUE (fragP->fr_symbol) + fragP->fr_offset; buffer = fragP->fr_fix + fragP->fr_literal; switch (fragP->fr_subtype) { case C (COND_JUMP, DISP12): case C (UNCD_JUMP, DISP12): { /* Get the address of the end of the instruction. */ int next_inst = fragP->fr_fix + fragP->fr_address + 2; unsigned char t0; int disp = targ_addr - next_inst; if (disp & 1) as_bad (_("odd displacement at %x"), next_inst - 2); disp >>= 1; if (! target_big_endian) { t0 = buffer[1] & 0xF8; md_number_to_chars (buffer, disp, 2); buffer[1] = (buffer[1] & 0x07) | t0; } else { t0 = buffer[0] & 0xF8; md_number_to_chars (buffer, disp, 2); buffer[0] = (buffer[0] & 0x07) | t0; } fragP->fr_fix += 2; } break; case C (COND_JUMP, DISP32): case C (COND_JUMP, UNDEF_WORD_DISP): { /* A conditional branch wont fit into 12 bits so: b!cond 1f jmpi 0f .align 2 0: .long disp 1: If the b!cond is 4 byte aligned, the literal which would go at x+4 will also be aligned. */ int first_inst = fragP->fr_fix + fragP->fr_address; int needpad = (first_inst & 3); if (! target_big_endian) buffer[1] ^= 0x08; else buffer[0] ^= 0x08; /* Toggle T/F bit. */ buffer[2] = INST_BYTE0 (MCORE_INST_JMPI); /* Build jmpi. */ buffer[3] = INST_BYTE1 (MCORE_INST_JMPI); if (needpad) { if (! target_big_endian) { buffer[0] = 4; /* Branch over jmpi, pad, and ptr. */ buffer[2] = 1; /* Jmpi offset of 1 gets the pointer. */ } else { buffer[1] = 4; /* Branch over jmpi, pad, and ptr. */ buffer[3] = 1; /* Jmpi offset of 1 gets the pointer. */ } buffer[4] = 0; /* Alignment/pad. */ buffer[5] = 0; buffer[6] = 0; /* Space for 32 bit address. */ buffer[7] = 0; buffer[8] = 0; buffer[9] = 0; /* Make reloc for the long disp. */ fix_new (fragP, fragP->fr_fix + 6, 4, fragP->fr_symbol, fragP->fr_offset, 0, BFD_RELOC_32); fragP->fr_fix += C32_LEN; } else { /* See comment below about this given gas' limitations for shrinking the fragment. '3' is the amount of code that we inserted here, but '4' is right for the space we reserved for this fragment. */ if (! target_big_endian) { buffer[0] = 3; /* Branch over jmpi, and ptr. */ buffer[2] = 0; /* Jmpi offset of 0 gets the pointer. */ } else { buffer[1] = 3; /* Branch over jmpi, and ptr. */ buffer[3] = 0; /* Jmpi offset of 0 gets the pointer. */ } buffer[4] = 0; /* Space for 32 bit address. */ buffer[5] = 0; buffer[6] = 0; buffer[7] = 0; /* Make reloc for the long disp. */ fix_new (fragP, fragP->fr_fix + 4, 4, fragP->fr_symbol, fragP->fr_offset, 0, BFD_RELOC_32); fragP->fr_fix += C32_LEN; /* Frag is actually shorter (see the other side of this ifdef) but gas isn't prepared for that. We have to re-adjust the branch displacement so that it goes beyond the full length of the fragment, not just what we actually filled in. */ if (! target_big_endian) buffer[0] = 4; /* Jmpi, ptr, and the 'tail pad'. */ else buffer[1] = 4; /* Jmpi, ptr, and the 'tail pad'. */ } } break; case C (UNCD_JUMP, DISP32): case C (UNCD_JUMP, UNDEF_WORD_DISP): { /* An unconditional branch will not fit in 12 bits, make code which looks like: jmpi 0f .align 2 0: .long disp we need a pad if "first_inst" is 4 byte aligned. [because the natural literal place is x + 2]. */ int first_inst = fragP->fr_fix + fragP->fr_address; int needpad = !(first_inst & 3); buffer[0] = INST_BYTE0 (MCORE_INST_JMPI); /* Build jmpi. */ buffer[1] = INST_BYTE1 (MCORE_INST_JMPI); if (needpad) { if (! target_big_endian) buffer[0] = 1; /* Jmpi offset of 1 since padded. */ else buffer[1] = 1; /* Jmpi offset of 1 since padded. */ buffer[2] = 0; /* Alignment. */ buffer[3] = 0; buffer[4] = 0; /* Space for 32 bit address. */ buffer[5] = 0; buffer[6] = 0; buffer[7] = 0; /* Make reloc for the long disp. */ fix_new (fragP, fragP->fr_fix + 4, 4, fragP->fr_symbol, fragP->fr_offset, 0, BFD_RELOC_32); fragP->fr_fix += U32_LEN; } else { if (! target_big_endian) buffer[0] = 0; /* Jmpi offset of 0 if no pad. */ else buffer[1] = 0; /* Jmpi offset of 0 if no pad. */ buffer[2] = 0; /* Space for 32 bit address. */ buffer[3] = 0; buffer[4] = 0; buffer[5] = 0; /* Make reloc for the long disp. */ fix_new (fragP, fragP->fr_fix + 2, 4, fragP->fr_symbol, fragP->fr_offset, 0, BFD_RELOC_32); fragP->fr_fix += U32_LEN; } } break; default: abort (); } } /* Applies the desired value to the specified location. Also sets up addends for 'rela' type relocations. */ void md_apply_fix (fixS * fixP, valueT * valP, segT segment ATTRIBUTE_UNUSED) { char * buf = fixP->fx_where + fixP->fx_frag->fr_literal; char * file = fixP->fx_file ? fixP->fx_file : _("unknown"); const char * symname; /* Note: use offsetT because it is signed, valueT is unsigned. */ offsetT val = *valP; symname = fixP->fx_addsy ? S_GET_NAME (fixP->fx_addsy) : _("<unknown>"); /* Save this for the addend in the relocation record. */ fixP->fx_addnumber = val; if (fixP->fx_addsy != NULL) { #ifdef OBJ_ELF /* For ELF we can just return and let the reloc that will be generated take care of everything. For COFF we still have to insert 'val' into the insn since the addend field will be ignored. */ return; #endif } else fixP->fx_done = 1; switch (fixP->fx_r_type) { /* Second byte of 2 byte opcode. */ case BFD_RELOC_MCORE_PCREL_IMM11BY2: if ((val & 1) != 0) as_bad_where (file, fixP->fx_line, _("odd distance branch (0x%lx bytes)"), (long) val); val /= 2; if (((val & ~0x3ff) != 0) && ((val | 0x3ff) != -1)) as_bad_where (file, fixP->fx_line, _("pcrel for branch to %s too far (0x%lx)"), symname, (long) val); if (target_big_endian) { buf[0] |= ((val >> 8) & 0x7); buf[1] |= (val & 0xff); } else { buf[1] |= ((val >> 8) & 0x7); buf[0] |= (val & 0xff); } break; /* Lower 8 bits of 2 byte opcode. */ case BFD_RELOC_MCORE_PCREL_IMM8BY4: val += 3; val /= 4; if (val & ~0xff) as_bad_where (file, fixP->fx_line, _("pcrel for lrw/jmpi/jsri to %s too far (0x%lx)"), symname, (long) val); else if (! target_big_endian) buf[0] |= (val & 0xff); else buf[1] |= (val & 0xff); break; /* Loopt instruction. */ case BFD_RELOC_MCORE_PCREL_IMM4BY2: if ((val < -32) || (val > -2)) as_bad_where (file, fixP->fx_line, _("pcrel for loopt too far (0x%lx)"), (long) val); val /= 2; if (! target_big_endian) buf[0] |= (val & 0xf); else buf[1] |= (val & 0xf); break; case BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2: /* Conditional linker map jsri to bsr. */ /* If its a local target and close enough, fix it. NB: >= -2k for backwards bsr; < 2k for forwards... */ if (fixP->fx_addsy == 0 && val >= -2048 && val < 2048) { long nval = (val / 2) & 0x7ff; nval |= MCORE_INST_BSR; /* REPLACE the instruction, don't just modify it. */ buf[0] = INST_BYTE0 (nval); buf[1] = INST_BYTE1 (nval); } else fixP->fx_done = 0; break; case BFD_RELOC_MCORE_PCREL_32: case BFD_RELOC_VTABLE_INHERIT: case BFD_RELOC_VTABLE_ENTRY: fixP->fx_done = 0; break; default: if (fixP->fx_addsy != NULL) { /* If the fix is an absolute reloc based on a symbol's address, then it cannot be resolved until the final link. */ fixP->fx_done = 0; } #ifdef OBJ_ELF else #endif { if (fixP->fx_size == 4) ; else if (fixP->fx_size == 2 && val >= -32768 && val <= 32767) ; else if (fixP->fx_size == 1 && val >= -256 && val <= 255) ; else abort (); md_number_to_chars (buf, val, fixP->fx_size); } break; } } void md_operand (expressionS * expressionP) { /* Ignore leading hash symbol, if poresent. */ if (* input_line_pointer == '#') { input_line_pointer ++; expression (expressionP); } } int md_long_jump_size; /* Called just before address relaxation, return the length by which a fragment must grow to reach it's destination. */ int md_estimate_size_before_relax (fragS * fragP, segT segment_type) { switch (fragP->fr_subtype) { default: abort (); case C (UNCD_JUMP, UNDEF_DISP): /* Used to be a branch to somewhere which was unknown. */ if (!fragP->fr_symbol) fragP->fr_subtype = C (UNCD_JUMP, DISP12); else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type) fragP->fr_subtype = C (UNCD_JUMP, DISP12); else fragP->fr_subtype = C (UNCD_JUMP, UNDEF_WORD_DISP); break; case C (COND_JUMP, UNDEF_DISP): /* Used to be a branch to somewhere which was unknown. */ if (fragP->fr_symbol && S_GET_SEGMENT (fragP->fr_symbol) == segment_type) /* Got a symbol and it's defined in this segment, become byte sized - maybe it will fix up */ fragP->fr_subtype = C (COND_JUMP, DISP12); else if (fragP->fr_symbol) /* Its got a segment, but its not ours, so it will always be long. */ fragP->fr_subtype = C (COND_JUMP, UNDEF_WORD_DISP); else /* We know the abs value. */ fragP->fr_subtype = C (COND_JUMP, DISP12); break; case C (UNCD_JUMP, DISP12): case C (UNCD_JUMP, DISP32): case C (UNCD_JUMP, UNDEF_WORD_DISP): case C (COND_JUMP, DISP12): case C (COND_JUMP, DISP32): case C (COND_JUMP, UNDEF_WORD_DISP): /* When relaxing a section for the second time, we don't need to do anything besides return the current size. */ break; } return md_relax_table[fragP->fr_subtype].rlx_length; } /* Put number into target byte order. */ void md_number_to_chars (char * ptr, valueT use, int nbytes) { if (target_big_endian) number_to_chars_bigendian (ptr, use, nbytes); else number_to_chars_littleendian (ptr, use, nbytes); } /* Round up a section size to the appropriate boundary. */ valueT md_section_align (segT segment ATTRIBUTE_UNUSED, valueT size) { /* Byte alignment is fine. */ return size; } /* The location from which a PC relative jump should be calculated, given a PC relative reloc. */ long md_pcrel_from_section (fixS * fixp, segT sec ATTRIBUTE_UNUSED) { #ifdef OBJ_ELF /* If the symbol is undefined or defined in another section we leave the add number alone for the linker to fix it later. Only account for the PC pre-bump (which is 2 bytes on the MCore). */ if (fixp->fx_addsy != (symbolS *) NULL && (! S_IS_DEFINED (fixp->fx_addsy) || (S_GET_SEGMENT (fixp->fx_addsy) != sec))) { assert (fixp->fx_size == 2); /* must be an insn */ return fixp->fx_size; } #endif /* The case where we are going to resolve things... */ return fixp->fx_size + fixp->fx_where + fixp->fx_frag->fr_address; } #define F(SZ,PCREL) (((SZ) << 1) + (PCREL)) #define MAP(SZ,PCREL,TYPE) case F (SZ, PCREL): code = (TYPE); break arelent * tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp) { arelent * rel; bfd_reloc_code_real_type code; switch (fixp->fx_r_type) { /* These confuse the size/pcrel macro approach. */ case BFD_RELOC_VTABLE_INHERIT: case BFD_RELOC_VTABLE_ENTRY: case BFD_RELOC_MCORE_PCREL_IMM4BY2: case BFD_RELOC_MCORE_PCREL_IMM8BY4: case BFD_RELOC_MCORE_PCREL_IMM11BY2: case BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2: case BFD_RELOC_RVA: code = fixp->fx_r_type; break; default: switch (F (fixp->fx_size, fixp->fx_pcrel)) { MAP (1, 0, BFD_RELOC_8); MAP (2, 0, BFD_RELOC_16); MAP (4, 0, BFD_RELOC_32); MAP (1, 1, BFD_RELOC_8_PCREL); MAP (2, 1, BFD_RELOC_16_PCREL); MAP (4, 1, BFD_RELOC_32_PCREL); default: code = fixp->fx_r_type; as_bad (_("Can not do %d byte %srelocation"), fixp->fx_size, fixp->fx_pcrel ? _("pc-relative") : ""); } break; } rel = xmalloc (sizeof (arelent)); rel->sym_ptr_ptr = xmalloc (sizeof (asymbol *)); *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); rel->address = fixp->fx_frag->fr_address + fixp->fx_where; /* Always pass the addend along! */ rel->addend = fixp->fx_addnumber; rel->howto = bfd_reloc_type_lookup (stdoutput, code); if (rel->howto == NULL) { as_bad_where (fixp->fx_file, fixp->fx_line, _("Cannot represent relocation type %s"), bfd_get_reloc_code_name (code)); /* Set howto to a garbage value so that we can keep going. */ rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32); assert (rel->howto != NULL); } return rel; } #ifdef OBJ_ELF /* See whether we need to force a relocation into the output file. This is used to force out switch and PC relative relocations when relaxing. */ int mcore_force_relocation (fixS * fix) { if (fix->fx_r_type == BFD_RELOC_RVA) return 1; return generic_force_reloc (fix); } /* Return true if the fix can be handled by GAS, false if it must be passed through to the linker. */ bfd_boolean mcore_fix_adjustable (fixS * fixP) { /* We need the symbol name for the VTABLE entries. */ if ( fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY) return 0; return 1; } #endif /* OBJ_ELF */
Go to most recent revision | Compare with Previous | Blame | View Log