Subversion Repositories openrisc_2011-10-31

/* This file is tc-msp430.h
   Copyright (C) 2002, 2004, 2005, 2007 Free Software Foundation, Inc.
 
   Contributed by Dmitry Diky <diwil@mail.ru>
 
   This file is part of GAS, the GNU Assembler.
 
   GAS is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3, or (at your option)
   any later version.
 
   GAS is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with GAS; see the file COPYING.  If not, write to the Free
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
   02110-1301, USA.  */
 
#define TC_MSP430
/*   By convention, you should define this macro in the `.h' file.  For
     example, `tc-m68k.h' defines `TC_M68K'.  You might have to use this
     if it is necessary to add CPU specific code to the object format
     file.  */
 
#define TARGET_FORMAT "elf32-msp430"
/*   This macro is the BFD target name to use when creating the output
     file.  This will normally depend upon the `OBJ_FMT' macro.  */
 
#define TARGET_ARCH bfd_arch_msp430
/*   This macro is the BFD architecture to pass to `bfd_set_arch_mach'.  */
 
#define TARGET_MACH 0
/*   This macro is the BFD machine number to pass to
     `bfd_set_arch_mach'.  If it is not defined, GAS will use 0.  */
 
#define TARGET_BYTES_BIG_ENDIAN 0
/*   You should define this macro to be non-zero if the target is big
     endian, and zero if the target is little endian.  */
 
#define ONLY_STANDARD_ESCAPES
/*   If you define this macro, GAS will warn about the use of
     nonstandard escape sequences in a string.  */
 
#define md_operand(x)
/*   GAS will call this function for any expression that can not be
     recognized.  When the function is called, `input_line_pointer'
     will point to the start of the expression.  */
 
#define md_number_to_chars number_to_chars_littleendian
/*   This should just call either `number_to_chars_bigendian' or
     `number_to_chars_littleendian', whichever is appropriate.  On
     targets like the MIPS which support options to change the
     endianness, which function to call is a runtime decision.  On
     other targets, `md_number_to_chars' can be a simple macro.  */
 
#define WORKING_DOT_WORD
/*
`md_short_jump_size'
`md_long_jump_size'
`md_create_short_jump'
`md_create_long_jump'
     If `WORKING_DOT_WORD' is defined, GAS will not do broken word
     processing (*note Broken words::.).  Otherwise, you should set
     `md_short_jump_size' to the size of a short jump (a jump that is
     just long enough to jump around a long jmp) and
     `md_long_jump_size' to the size of a long jump (a jump that can go
     anywhere in the function), You should define
     `md_create_short_jump' to create a short jump around a long jump,
     and define `md_create_long_jump' to create a long jump.  */
 
#define MD_APPLY_FIX3
 
#define TC_HANDLES_FX_DONE
 
#undef RELOC_EXPANSION_POSSIBLE
/*   If you define this macro, it means that `tc_gen_reloc' may return
     multiple relocation entries for a single fixup.  In this case, the
     return value of `tc_gen_reloc' is a pointer to a null terminated
     array.  */
 
#define MD_PCREL_FROM_SECTION(FIXP, SEC) md_pcrel_from_section(FIXP, SEC)
/*   If you define this macro, it should return the offset between the
     address of a PC relative fixup and the position from which the PC
     relative adjustment should be made.  On many processors, the base
     of a PC relative instruction is the next instruction, so this
     macro would return the length of an instruction.  */
 
extern long md_pcrel_from_section (struct fix *, segT);
 
#define LISTING_WORD_SIZE 2
/*   The number of bytes to put into a word in a listing.  This affects
     the way the bytes are clumped together in the listing.  For
     example, a value of 2 might print `1234 5678' where a value of 1
     would print `12 34 56 78'.  The default value is 4.  */
 
#define LEX_DOLLAR 0
/* MSP430 port does not use `$' as a logical line separator */
 
#define TC_IMPLICIT_LCOMM_ALIGNMENT(SIZE, P2VAR) (P2VAR) = 0
/*   An `.lcomm' directive with no explicit alignment parameter will
     use this macro to set P2VAR to the alignment that a request for
     SIZE bytes will have.  The alignment is expressed as a power of
     two.  If no alignment should take place, the macro definition
     should do nothing.  Some targets define a `.bss' directive that is
     also affected by this macro.  The default definition will set
     P2VAR to the truncated power of two of sizes up to eight bytes.  */
 
#define md_relax_frag(SEG, FRAGP, STRETCH)             \
   msp430_relax_frag (SEG, FRAGP, STRETCH)
extern long msp430_relax_frag (segT, fragS *, long);
 
#define TC_FORCE_RELOCATION_LOCAL(FIX)	\
   msp430_force_relocation_local(FIX)
extern int msp430_force_relocation_local(struct fix *);
 
 
extern int msp430_enable_relax;
extern int msp430_enable_polys;