URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.18.50/] [include/] [opcode/] [d30v.h] - Rev 310
Go to most recent revision | Compare with Previous | Blame | View Log
/* d30v.h -- Header file for D30V opcode table Copyright 1997, 1998, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. Written by Martin Hunt (hunt@cygnus.com), Cygnus Solutions This file is part of GDB, GAS, and the GNU binutils. GDB, GAS, and the GNU binutils are free software; you can redistribute them and/or modify them under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GDB, GAS, and the GNU binutils are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this file; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef D30V_H #define D30V_H #define NOP 0x00F00000 /* Structure to hold information about predefined registers. */ struct pd_reg { char *name; /* name to recognize */ char *pname; /* name to print for this register */ int value; }; extern const struct pd_reg pre_defined_registers[]; int reg_name_cnt (void); /* the number of control registers */ #define MAX_CONTROL_REG 64 /* define the format specifiers */ #define FM00 0 #define FM01 0x80000000 #define FM10 0x8000000000000000LL #define FM11 0x8000000080000000LL /* define the opcode classes */ #define BRA 0 #define LOGIC 1 #define IMEM 2 #define IALU1 4 #define IALU2 5 /* define the execution condition codes */ #define ECC_AL 0 /* ALways (default) */ #define ECC_TX 1 /* F0=True, F1=Don't care */ #define ECC_FX 2 /* F0=False, F1=Don't care */ #define ECC_XT 3 /* F0=Don't care, F1=True */ #define ECC_XF 4 /* F0=Don't care, F1=False */ #define ECC_TT 5 /* F0=True, F1=True */ #define ECC_TF 6 /* F0=True, F1=False */ #define ECC_RESERVED 7 /* reserved */ #define ECC_MAX ECC_RESERVED extern const char *d30v_ecc_names[]; /* condition code table for CMP and CMPU */ extern const char *d30v_cc_names[]; /* The opcode table is an array of struct d30v_opcode. */ struct d30v_opcode { /* The opcode name. */ const char *name; /* the opcode */ int op1; /* first part, "IALU1" for example */ int op2; /* the rest of the opcode */ /* opcode format(s). These numbers correspond to entries */ /* in the d30v_format_table */ unsigned char format[4]; #define SHORT_M 1 #define SHORT_M2 5 /* for ld2w and st2w */ #define SHORT_A 9 #define SHORT_B1 11 #define SHORT_B2 12 #define SHORT_B2r 13 #define SHORT_B3 14 #define SHORT_B3r 16 #define SHORT_B3b 18 #define SHORT_B3br 20 #define SHORT_D1r 22 #define SHORT_D2 24 #define SHORT_D2r 26 #define SHORT_D2Br 28 #define SHORT_U 30 /* unary SHORT_A. ABS for example */ #define SHORT_F 31 /* SHORT_A with flag registers */ #define SHORT_AF 33 /* SHORT_A with only the first register a flag register */ #define SHORT_T 35 /* for trap instruction */ #define SHORT_A5 36 /* SHORT_A with a 5-bit immediate instead of 6 */ #define SHORT_CMP 38 /* special form for CMPcc */ #define SHORT_CMPU 40 /* special form for CMPUcc */ #define SHORT_A1 42 /* special form of SHORT_A for MACa opcodes where a=1 */ #define SHORT_AA 44 /* SHORT_A with the first register an accumulator */ #define SHORT_RA 46 /* SHORT_A with the second register an accumulator */ #define SHORT_MODINC 48 #define SHORT_MODDEC 49 #define SHORT_C1 50 #define SHORT_C2 51 #define SHORT_UF 52 #define SHORT_A2 53 #define SHORT_NONE 55 /* no operands */ #define SHORT_AR 56 /* like SHORT_AA but only accept register as third parameter */ #define LONG 57 #define LONG_U 58 /* unary LONG */ #define LONG_Ur 59 /* LONG pc-relative */ #define LONG_CMP 60 /* special form for CMPcc and CMPUcc */ #define LONG_M 61 /* Memory long for ldb, stb */ #define LONG_M2 62 /* Memory long for ld2w, st2w */ #define LONG_2 63 /* LONG with 2 operands; jmptnz */ #define LONG_2r 64 /* LONG with 2 operands; bratnz */ #define LONG_2b 65 /* LONG_2 with modifier of 3 */ #define LONG_2br 66 /* LONG_2r with modifier of 3 */ #define LONG_D 67 /* for DJMPI */ #define LONG_Dr 68 /* for DBRAI */ #define LONG_Dbr 69 /* for repeati */ /* the execution unit(s) used */ int unit; #define EITHER 0 #define IU 1 #define MU 2 #define EITHER_BUT_PREFER_MU 3 /* this field is used to decide if two instructions */ /* can be executed in parallel */ long flags_used; long flags_set; #define FLAG_0 (1L<<0) #define FLAG_1 (1L<<1) #define FLAG_2 (1L<<2) #define FLAG_3 (1L<<3) #define FLAG_4 (1L<<4) /* S (saturation) */ #define FLAG_5 (1L<<5) /* V (overflow) */ #define FLAG_6 (1L<<6) /* VA (accumulated overflow) */ #define FLAG_7 (1L<<7) /* C (carry/borrow) */ #define FLAG_SM (1L<<8) /* SM (stack mode) */ #define FLAG_RP (1L<<9) /* RP (repeat enable) */ #define FLAG_CONTROL (1L<<10) /* control registers */ #define FLAG_A0 (1L<<11) /* A0 */ #define FLAG_A1 (1L<<12) /* A1 */ #define FLAG_JMP (1L<<13) /* instruction is a branch */ #define FLAG_JSR (1L<<14) /* subroutine call. must be aligned */ #define FLAG_MEM (1L<<15) /* reads/writes memory */ #define FLAG_NOT_WITH_ADDSUBppp (1L<<16) /* Old meaning: a 2 word 4 byter operation New meaning: operation cannot be combined in parallel with ADD/SUBppp. */ #define FLAG_MUL16 (1L<<17) /* 16 bit multiply */ #define FLAG_MUL32 (1L<<18) /* 32 bit multiply */ #define FLAG_ADDSUBppp (1L<<19) /* ADDppp or SUBppp */ #define FLAG_DELAY (1L<<20) /* This is a delayed branch or jump */ #define FLAG_LKR (1L<<21) /* insn in left slot kills right slot */ #define FLAG_CVVA (FLAG_5|FLAG_6|FLAG_7) #define FLAG_C FLAG_7 #define FLAG_ALL (FLAG_0 | \ FLAG_1 | \ FLAG_2 | \ FLAG_3 | \ FLAG_4 | \ FLAG_5 | \ FLAG_6 | \ FLAG_7 | \ FLAG_SM | \ FLAG_RP | \ FLAG_CONTROL) int reloc_flag; #define RELOC_PCREL 1 #define RELOC_ABS 2 }; extern const struct d30v_opcode d30v_opcode_table[]; extern const int d30v_num_opcodes; /* The operands table is an array of struct d30v_operand. */ struct d30v_operand { /* the length of the field */ int length; /* The number of significant bits in the operand. */ int bits; /* position relative to Ra */ int position; /* syntax flags. */ long flags; }; extern const struct d30v_operand d30v_operand_table[]; /* Values defined for the flags field of a struct d30v_operand. */ /* this is the destination register; it will be modified */ /* this is used by the optimizer */ #define OPERAND_DEST (1) /* number or symbol */ #define OPERAND_NUM (2) /* address or label */ #define OPERAND_ADDR (4) /* register */ #define OPERAND_REG (8) /* postincrement + */ #define OPERAND_PLUS (0x10) /* postdecrement - */ #define OPERAND_MINUS (0x20) /* signed number */ #define OPERAND_SIGNED (0x40) /* this operand must be shifted left by 3 */ #define OPERAND_SHIFT (0x80) /* flag register */ #define OPERAND_FLAG (0x100) /* control register */ #define OPERAND_CONTROL (0x200) /* accumulator */ #define OPERAND_ACC (0x400) /* @ */ #define OPERAND_ATSIGN (0x800) /* @( */ #define OPERAND_ATPAR (0x1000) /* predecrement mode '@-sp' */ #define OPERAND_ATMINUS (0x2000) /* this operand changes the instruction name */ /* for example, CPMcc, CMPUcc */ #define OPERAND_NAME (0x4000) /* fake operand for mvtsys and mvfsys */ #define OPERAND_SPECIAL (0x8000) /* let the optimizer know that two registers are affected */ #define OPERAND_2REG (0x10000) /* This operand is pc-relative. Note that repeati can have two immediate operands, one of which is pcrel, the other (the IMM6U one) is not. */ #define OPERAND_PCREL (0x20000) /* The format table is an array of struct d30v_format. */ struct d30v_format { int form; /* SHORT_A, LONG, etc */ int modifier; /* two bit modifier following opcode */ unsigned char operands[5]; }; extern const struct d30v_format d30v_format_table[]; /* an instruction is defined by an opcode and a format */ /* for example, "add" has one opcode, but three different */ /* formats, 2 SHORT_A forms and a LONG form. */ struct d30v_insn { struct d30v_opcode *op; /* pointer to an entry in the opcode table */ struct d30v_format *form; /* pointer to an entry in the format table */ int ecc; /* execution condition code */ }; /* an expressionS only has one register type, so we fake it */ /* by setting high bits to indicate type */ #define REGISTER_MASK 0xFF #endif /* D30V_H */
Go to most recent revision | Compare with Previous | Blame | View Log