URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [gnu-src/] [binutils-2.18.50/] [opcodes/] [ChangeLog] - Rev 466
Go to most recent revision | Compare with Previous | Blame | View Log
2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (MOVBE_Fixup): New.
(Mo): Likewise.
(PREFIX_0F3880): Likewise.
(PREFIX_0F3881): Likewise.
(PREFIX_0F38F0): Updated.
(prefix_table): Add PREFIX_0F3880 and PREFIX_0F3881. Update
PREFIX_0F38F0 and PREFIX_0F38F1 for movbe.
(three_byte_table): Use PREFIX_0F3880 and PREFIX_0F3881.
* i386-gen.c (cpu_flag_init): Add CPU_MOVBE_FLAGS and
CPU_EPT_FLAGS.
(cpu_flags): Add CpuMovbe and CpuEPT.
* i386-opc.h (CpuMovbe): New.
(CpuEPT): Likewise.
(CpuLM): Updated.
(i386_cpu_flags): Add cpumovbe and cpuept.
* i386-opc.tbl: Add entries for movbe and EPT instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-04-29 Adam Nemet <anemet@caviumnetworks.com>
* mips-opc.c (mips_builtin_opcodes): Set field `match' to 0 for
the two drem and the two dremu macros.
2008-04-28 Adam Nemet <anemet@caviumnetworks.com>
* mips-opc.c (mips_builtin_opcodes): Mark prefx and c1
instructions FP_S. Mark l.s, li.s, lwc1, swc1, s.s, trunc.w.s and
cop1 macros INSN2_M_FP_S. Mark l.d, li.d, ldc1 and sdc1 macros
INSN2_M_FP_D. Mark trunc.w.d macro INSN2_M_FP_S and INSN2_M_FP_D.
2008-04-25 David S. Miller <davem@davemloft.net>
* sparc-dis.c: Emit %stick instead of %sys_tick, and %stick_cmpr
instead of %sys_tick_cmpr, as suggested in architecture manuals.
2008-04-23 Paolo Bonzini <bonzini@gnu.org>
* aclocal.m4: Regenerate.
* configure: Regenerate.
2008-04-23 David S. Miller <davem@davemloft.net>
* sparc-opc.c (asi_table): Add UltraSPARC and Niagara
extended values.
(prefetch_table): Add missing values.
2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Add NoAVX.
* i386-opc.h (NoAVX): New.
(OldGcc): Updated.
(i386_opcode_modifier): Add noavx.
* i386-opc.tbl: Add NoAVX to SSE, SSE2, SSE3 and SSSE3
instructions which don't have AVX equivalent.
* i386-tbl.h: Regenerated.
2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_VEX_FMA): New.
(OP_EX_VexImmW): Likewise.
(VexFMA): Likewise.
(Vex128FMA): Likewise.
(EXVexImmW): Likewise.
(get_vex_imm8): Likewise.
(OP_EX_VexReg): Likewise.
(vex_i4_done): Renamed to ...
(vex_w_done): This.
(prefix_table): Replace EXVexW with EXVexImmW on vpermil2ps
and vpermil2pd. Replace Vex/Vex128 with VexFMA/Vex128FMA on
FMA instructions.
(print_insn): Updated.
(OP_EX_VexW): Rewrite to swap register in VEX with EX.
(OP_REG_VexI4): Check invalid high registers.
2008-04-16 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
Michael Meissner <michael.meissner@amd.com>
* i386-opc.tbl: Fix protX to allow memory in the middle operand.
* i386-tbl.h: Regenerate from i386-opc.tbl.
2008-04-14 Edmar Wienskoski <edmar@freescale.com>
* ppc-dis.c (powerpc_dialect): Handle "e500mc". Extend "e500" to
accept Power E500MC instructions.
(print_ppc_disassembler_options): Document -Me500mc.
* ppc-opc.c (DUIS, DUI, T): New.
(XRT, XRTRA): Likewise.
(E500MC): Likewise.
(powerpc_opcodes): Add new Power E500MC instructions.
2008-04-10 Andreas Krebbel <krebbel1@de.ibm.com>
* s390-dis.c (init_disasm): Evaluate disassembler_options.
(print_s390_disassembler_options): New function.
* disassemble.c (disassembler_usage): Invoke
print_s390_disassembler_options.
2008-04-10 Andreas Krebbel <krebbel1@de.ibm.com>
* s390-mkopc.c (insertExpandedMnemonic): Expand string sizes
of local variables used for mnemonic parsing: prefix, suffix and
number.
2008-04-10 Andreas Krebbel <krebbel1@de.ibm.com>
* s390-mkopc.c (s390_cond_ext_format): Add back the mnemonic
extensions for conditional jumps (o, p, m, nz, z, nm, np, no).
(s390_crb_extensions): New extensions table.
(insertExpandedMnemonic): Handle '$' tag.
* s390-opc.txt: Remove conditional jump variants which can now
be expanded automatically.
Replace '*' tag with '$' in the compare and branch instructions.
2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PREFIX_VEX_38XX): Add a tab.
(PREFIX_VEX_3AXX): Likewis.
2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Remove 4 extra blank lines.
2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Replace CPU_CLMUL_FLAGS/CpuCLMUL
with CPU_PCLMUL_FLAGS/CpuPCLMUL.
(cpu_flags): Replace CpuCLMUL with CpuPCLMUL.
* i386-opc.tbl: Likewise.
* i386-opc.h (CpuCLMUL): Renamed to ...
(CpuPCLMUL): This.
(CpuFMA): Updated.
(i386_cpu_flags): Replace cpuclmul with cpupclmul.
* i386-init.h: Regenerated.
2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_E_register): New.
(OP_E_memory): Likewise.
(OP_VEX): Likewise.
(OP_EX_Vex): Likewise.
(OP_EX_VexW): Likewise.
(OP_XMM_Vex): Likewise.
(OP_XMM_VexW): Likewise.
(OP_REG_VexI4): Likewise.
(PCLMUL_Fixup): Likewise.
(VEXI4_Fixup): Likewise.
(VZERO_Fixup): Likewise.
(VCMP_Fixup): Likewise.
(VPERMIL2_Fixup): Likewise.
(rex_original): Likewise.
(rex_ignored): Likewise.
(Mxmm): Likewise.
(XMM): Likewise.
(EXxmm): Likewise.
(EXxmmq): Likewise.
(EXymmq): Likewise.
(Vex): Likewise.
(Vex128): Likewise.
(Vex256): Likewise.
(VexI4): Likewise.
(EXdVex): Likewise.
(EXqVex): Likewise.
(EXVexW): Likewise.
(EXdVexW): Likewise.
(EXqVexW): Likewise.
(XMVex): Likewise.
(XMVexW): Likewise.
(XMVexI4): Likewise.
(PCLMUL): Likewise.
(VZERO): Likewise.
(VCMP): Likewise.
(VPERMIL2): Likewise.
(xmm_mode): Likewise.
(xmmq_mode): Likewise.
(ymmq_mode): Likewise.
(vex_mode): Likewise.
(vex128_mode): Likewise.
(vex256_mode): Likewise.
(USE_VEX_C4_TABLE): Likewise.
(USE_VEX_C5_TABLE): Likewise.
(USE_VEX_LEN_TABLE): Likewise.
(VEX_C4_TABLE): Likewise.
(VEX_C5_TABLE): Likewise.
(VEX_LEN_TABLE): Likewise.
(REG_VEX_XX): Likewise.
(MOD_VEX_XXX): Likewise.
(PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
(PREFIX_0F3A44): Likewise.
(PREFIX_0F3ADF): Likewise.
(PREFIX_VEX_XXX): Likewise.
(VEX_OF): Likewise.
(VEX_OF38): Likewise.
(VEX_OF3A): Likewise.
(VEX_LEN_XXX): Likewise.
(vex): Likewise.
(need_vex): Likewise.
(need_vex_reg): Likewise.
(vex_i4_done): Likewise.
(vex_table): Likewise.
(vex_len_table): Likewise.
(OP_REG_VexI4): Likewise.
(vex_cmp_op): Likewise.
(pclmul_op): Likewise.
(vpermil2_op): Likewise.
(m_mode): Updated.
(es_reg): Likewise.
(PREFIX_0F38F0): Likewise.
(PREFIX_0F3A60): Likewise.
(reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
(prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
and PREFIX_VEX_XXX entries.
(x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
(three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
PREFIX_0F3ADF.
(mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
Add MOD_VEX_XXX entries.
(ckprefix): Initialize rex_original and rex_ignored. Store the
REX byte in rex_original.
(get_valid_dis386): Handle the implicit prefix in VEX prefix
bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
(print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
calling get_valid_dis386. Use rex_original and rex_ignored when
printing out REX.
(putop): Handle "XY".
(intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
ymmq_mode.
(OP_E_extended): Updated to use OP_E_register and
OP_E_memory.
(OP_XMM): Handle VEX.
(OP_EX): Likewise.
(XMM_Fixup): Likewise.
(CMP_Fixup): Use ARRAY_SIZE.
* i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
CPU_FMA_FLAGS and CPU_AVX_FLAGS.
(operand_type_init): Add OPERAND_TYPE_REGYMM and
OPERAND_TYPE_VEX_IMM4.
(cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
(opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
VexImmExt and SSE2AVX.
(operand_types): Add RegYMM, Ymmword and Vex_Imm4.
* i386-opc.h (CpuAVX): New.
(CpuAES): Likewise.
(CpuCLMUL): Likewise.
(CpuFMA): Likewise.
(Vex): Likewise.
(Vex256): Likewise.
(VexNDS): Likewise.
(VexNDD): Likewise.
(VexW0): Likewise.
(VexW1): Likewise.
(Vex0F): Likewise.
(Vex0F38): Likewise.
(Vex0F3A): Likewise.
(Vex3Sources): Likewise.
(VexImmExt): Likewise.
(SSE2AVX): Likewise.
(RegYMM): Likewise.
(Ymmword): Likewise.
(Vex_Imm4): Likewise.
(Implicit1stXmm0): Likewise.
(CpuXsave): Updated.
(CpuLM): Likewise.
(ByteOkIntel): Likewise.
(OldGcc): Likewise.
(Control): Likewise.
(Unspecified): Likewise.
(OTMax): Likewise.
(i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
(i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
vex3sources, veximmext and sse2avx.
(i386_operand_type): Add regymm, ymmword and vex_imm4.
* i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.
* i386-reg.tbl: Add AVX registers, ymm0..ymm15.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com>
From Robin Getz <robin.getz@analog.com>
* bfin-dis.c (bu32): Typedef.
(enum const_forms_t): Add c_uimm32 and c_huimm32.
(constant_formats[]): Add uimm32 and huimm16.
(fmtconst_val): New.
(uimm32): Define.
(huimm32): Define.
(imm16_val): Define.
(luimm16_val): Define.
(struct saved_state): Define.
(GREG, DPREG, DREG, PREG, SPREG, FPREG, IREG, MREG, BREG, LREG,
A0XREG, A0WREG, A1XREG, A1WREG,CCREG, LC0REG, LT0REG, LB0REG,
LC1REG, LT1REG, LB1REG, RETSREG, PCREG): Define.
(get_allreg): New.
(decode_LDIMMhalf_0): Print out the whole register value.
From Jie Zhang <jie.zhang@analog.com>
* bfin-dis.c (decode_dsp32mac_0): Decode (IU) option for
multiply and multiply-accumulate to data register instruction.
* bfin-dis.c: (c_uimm4s4d, c_imm5d, c_imm7d, c_imm16d, c_uimm16s4d,
c_imm32, c_huimm32e): Define.
(constant_formats): Add flags for printing decimal, leading spaces, and
exact symbols.
(comment, parallel): Add global flags in all disassembly.
(fmtconst): Take advantage of new flags, and print default in hex.
(fmtconst_val): Likewise.
(decode_macfunc): Be consistant with spaces, tabs, comments,
capitalization in disassembly, fix minor coding style issues.
(reg_names, amod0, amod1, amod0amod2, aligndir, get_allreg): Likewise.
(decode_ProgCtrl_0, decode_PushPopMultiple_0, decode_CCflag_0,
decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0, decode_LOGI2op_0,
decode_COMP3op_0, decode_COMPI2opD_0, decode_COMPI2opP_0,
decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
decode_dspLDST_0, decode_LDST_0, decode_LDSTiiFP_0, decode_LDSTii_0,
decode_LoopSetup_0, decode_LDIMMhalf_0, decode_CALLa_0,
decode_LDSTidxI_0, decode_linkage_0, decode_dsp32alu_0,
decode_dsp32shift_0, decode_dsp32shiftimm_0, decode_pseudodbg_assert_0,
_print_insn_bfin, print_insn_bfin): Likewise.
2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* aclocal.m4: Regenerate.
* configure: Likewise.
* Makefile.in: Likewise.
2008-03-13 Alan Modra <amodra@bigpond.net.au>
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
* configure: Regenerate.
2008-03-07 Alan Modra <amodra@bigpond.net.au>
* ppc-opc.c (powerpc_opcodes): Order and format.
2008-03-01 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Allow 16-bit near indirect branches for x86-64.
* i386-tbl.h: Regenerated.
2008-02-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Disallow 16-bit near indirect branches for
x86-64.
* i386-tbl.h: Regenerated.
2008-02-21 Jan Beulich <jbeulich@novell.com>
* i386-opc.tbl: Allow Dword for far indirect call. Allow Dword
and Fword for far indirect jmp. Allow Reg16 and Word for near
indirect jmp on x86-64. Disallow Fword for lcall.
* i386-tbl.h: Re-generate.
2008-02-18 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
* cr16-opc.c (cr16_num_optab): Defined
2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (operand_type_init): Add OPERAND_TYPE_INOUTPORTREG.
* i386-init.h: Regenerated.
2008-02-14 Nick Clifton <nickc@redhat.com>
PR binutils/5524
* configure.in (SHARED_LIBADD): Select the correct host specific
file extension for shared libraries.
* configure: Regenerate.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-opc.h (RegFlat): New.
* i386-reg.tbl (flat): Add.
* i386-tbl.h: Re-generate.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (a_mode): New.
(cond_jump_mode): Adjust.
(Ma): Change to a_mode.
(intel_operand_size): Handle a_mode.
* i386-opc.tbl: Allow Dword and Qword for bound.
* i386-tbl.h: Re-generate.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-gen.c (process_i386_registers): Process new fields.
* i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
unsigned char. Add dw2_regnum and Dw2Inval.
* i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
register names.
* i386-tbl.h: Re-generate.
2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Add CPU_XSAVE_FLAGS.
* i386-init.h: Updated.
2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flags): Add CpuXsave.
* i386-opc.h (CpuXsave): New.
(CpuLM): Updated.
(i386_cpu_flags): Add cpuxsave.
* i386-dis.c (MOD_0FAE_REG_4): New.
(RM_0F01_REG_2): Likewise.
(MOD_0FAE_REG_5): Updated.
(RM_0F01_REG_3): Likewise.
(reg_table): Use MOD_0FAE_REG_4.
(mod_table): Use RM_0F01_REG_2. Add MOD_0FAE_REG_4. Updated
for xrstor.
(rm_table): Add RM_0F01_REG_2.
* i386-opc.tbl: Add xsave, xrstor, xgetbv and xsetbv.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-02-11 Jan Beulich <jbeulich@novell.com>
* i386-opc.tbl: Remove Disp32S from CpuNo64 opcodes. Remove
Disp16 from Cpu64 non-jump opcodes (including loop and j?cxz).
* i386-tbl.h: Re-generate.
2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
PR 5715
* configure: Regenerated.
2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
* mips-dis.c: Update copyright.
(mips_arch_choices): Add Octeon.
* mips-opc.c: Update copyright.
(IOCT): New macro.
(mips_builtin_opcodes): Add Octeon instruction synciobdma.
2008-01-29 Alan Modra <amodra@bigpond.net.au>
* ppc-opc.c: Support optional L form mtmsr.
2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_E_extended): Handle r12 like rsp.
2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Add CpuLM to CPU_GENERIC64_FLAGS.
* i386-init.h: Regenerated.
2008-01-23 Tristan Gingold <gingold@adacore.com>
* ia64-dis.c (print_insn_ia64): Display symbolic name of ar.fcr,
ar.eflag, ar.csd, ar.ssd, ar.cflg, ar.fsr, ar.fir and ar.fdr.
2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Remove CpuMMX2.
(cpu_flags): Likewise.
* i386-opc.h (CpuMMX2): Removed.
(CpuSSE): Updated.
* i386-opc.tbl: Replace CpuMMX2 with CpuSSE|Cpu3dnowA.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Add CPU_VMX_FLAGS and
CPU_SMX_FLAGS.
* i386-init.h: Regenerated.
2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Use Qword on movddup.
* i386-tbl.h: Regenerated.
2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Put back 16bit movsx/movzx for AT&T syntax.
* i386-tbl.h: Regenerated.
2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (Mx): New.
(PREFIX_0FC3): Likewise.
(PREFIX_0FC7_REG_6): Updated.
(dis386_twobyte): Use PREFIX_0FC3.
(prefix_table): Add PREFIX_0FC3. Use Mq on movntq and movntsd.
Use Mx on movntps, movntpd, movntdq and movntdqa. Use Md on
movntss.
2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Add IntelSyntax.
(operand_types): Add Mem.
* i386-opc.h (IntelSyntax): New.
* i386-opc.h (Mem): New.
(Byte): Updated.
(Opcode_Modifier_Max): Updated.
(i386_opcode_modifier): Add intelsyntax.
(i386_operand_type): Add mem.
* i386-opc.tbl: Remove Reg16 from movnti. Add sizes to more
instructions.
* i386-reg.tbl: Add size for accumulator.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-01-13 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h (Byte): Fix a typo.
2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
PR gas/5534
* i386-gen.c (operand_type_init): Add Dword to
OPERAND_TYPE_ACC32. Add Qword to OPERAND_TYPE_ACC64.
(opcode_modifiers): Remove CheckSize, Byte, Word, Dword,
Qword and Xmmword.
(operand_types): Add Byte, Word, Dword, Fword, Qword, Tbyte,
Xmmword, Unspecified and Anysize.
(set_bitfield): Make Mmword an alias of Qword. Make Oword
an alias of Xmmword.
* i386-opc.h (CheckSize): Removed.
(Byte): Updated.
(Word): Likewise.
(Dword): Likewise.
(Qword): Likewise.
(Xmmword): Likewise.
(FWait): Updated.
(OTMax): Likewise.
(i386_opcode_modifier): Remove checksize, byte, word, dword,
qword and xmmword.
(Fword): New.
(TBYTE): Likewise.
(Unspecified): Likewise.
(Anysize): Likewise.
(i386_operand_type): Add byte, word, dword, fword, qword,
tbyte xmmword, unspecified and anysize.
* i386-opc.tbl: Updated to use Byte, Word, Dword, Fword, Qword,
Tbyte, Xmmword, Unspecified and Anysize.
* i386-reg.tbl: Add size for accumulator.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (REG_0F0E): Renamed to REG_0F0D.
(REG_0F18): Updated.
(reg_table): Updated.
(dis386_twobyte): Updated. Use "nopQ" on 0x19 to 0x1e.
(twobyte_has_modrm): Set 1 for 0x19 to 0x1e.
2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (set_bitfield): Use fail () on error.
2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (lineno): New.
(filename): Likewise.
(set_bitfield): Report filename and line numer on error.
(process_i386_opcodes): Set filename and update lineno.
(process_i386_registers): Likewise.
2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Rename IntelMnemonic to
ATTSyntax.
* i386-opc.h (IntelMnemonic): Renamed to ..
(ATTSyntax): This
(Opcode_Modifier_Max): Updated.
(i386_opcode_modifier): Remove intelmnemonic. Add attsyntax
and intelsyntax.
* i386-opc.tbl: Remove IntelMnemonic and update with ATTSyntax
on fsub, fubp, fsubr, fsubrp, div, fdivp, fdivr and fdivrp.
* i386-tbl.h: Regenerated.
2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c: Update copyright to 2008.
* i386-opc.h: Likewise.
* i386-opc.tbl: Likewise.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Add NoRex64 to extractps, movmskpd, movmskps,
pextrb, pextrw, pinsrb, pinsrw and pmovmskb.
* i386-tbl.h: Regenerated.
2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Remove CpuSSE4_1_Or_5 and
CpuSSE4_2_Or_ABM.
(cpu_flags): Likewise.
* i386-opc.h (CpuSSE4_1_Or_5): Removed.
(CpuSSE4_2_Or_ABM): Likewise.
(CpuLM): Updated.
(i386_cpu_flags): Remove cpusse4_1_or_5 and cpusse4_2_or_abm.
* i386-opc.tbl: Replace CpuSSE4_1_Or_5, CpuSSE4_2_Or_ABM and
Cpu686|CpuPadLock with CpuSSE4_1|CpuSSE5, CpuABM|CpuSSE4_2
and CpuPadLock, respectively.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Remove No_xSuf.
* i386-opc.h (No_xSuf): Removed.
(CheckSize): Updated.
* i386-tbl.h: Regenerated.
2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Add CpuSSE4_2_Or_ABM to
CPU_AMDFAM10_FLAGS, CPU_SSE4_2_FLAGS, CpuABM and
CPU_SSE5_FLAGS.
(cpu_flags): Add CpuSSE4_2_Or_ABM.
* i386-opc.h (CpuSSE4_2_Or_ABM): New.
(CpuLM): Updated.
(i386_cpu_flags): Add cpusse4_2_or_abm.
* i386-opc.tbl: Use CpuSSE4_2_Or_ABM instead of
CpuABM|CpuSSE4_2 on popcnt.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h: Update comments.
2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Use Qword instead of QWord.
* i386-opc.h: Likewise.
* i386-opc.tbl: Likewise.
2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
PR gas/5534
* i386-gen.c (opcode_modifiers): Add No_xSuf, CheckSize,
Byte, Word, Dword, QWord and Xmmword.
* i386-opc.h (No_xSuf): New.
(CheckSize): Likewise.
(Byte): Likewise.
(Word): Likewise.
(Dword): Likewise.
(QWord): Likewise.
(Xmmword): Likewise.
(FWait): Updated.
(i386_opcode_modifier): Add No_xSuf, CheckSize, Byte, Word,
Dword, QWord and Xmmword.
* i386-opc.tbl: Add CheckSize|QWord to movq if IgnoreSize is
used.
* i386-tbl.h: Regenerated.
2008-01-02 Mark Kettenis <kettenis@gnu.org>
* m88k-dis.c (instructions): Fix fcvt.* instructions.
From Miod Vallat.
For older changes see ChangeLog-2007
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End:
Go to most recent revision | Compare with Previous | Blame | View Log